Buy or Sell Your 750 KW Generators
AI-ranked results for 750kw - closest matches first
JUST ADDED!
MV Manufacturing Group, 1200 amp motor control ce, 575 Volt, IP42 Enclosure, 2015
Lenmark Industries | Langley, BC
Category: Motor Control Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Mv Manufacturing Group
Model: 1200 AMP MOTOR CONTROL CE
Year: 2015
SKU: 137977, Year: 2015, Condition: Used, Additional :, Original Designation: MCC-O Gravity & Grinding area, Bus Voltage: 575 V, Short Circuit Rating: 25 kA rms Sym, Board Rated: 1200 A, Horizontal Busbar Rated: 1200 A, Vertical Busbar Rated: 1200 A, Form: 4A, Enclosure: IP42 custom built, Main Equipment Summary ...more
2" x .135" Addison, Tube Mill w/ Alpha Double Cut Cutoff, 150 FPM, R-L, 2.25" shaft
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Addison
LINE SPECIFICATINS, Tube Diameter:.500"- 2.00", Wall Thickness:.035" -.135", Line Speed: 30-150 FPM, Line Direction: Right to Left, 2.25" Diameter Shafts, COMPLETE TUBE PRODUCTION LINE INCLUDING, 6000# Kent Double End Uncoiler, Model SKD 6000, 12" Coil Width, 60" Coil O.D., 17" -21" Coil I.D., 60" Coil O.D., 4 Leaf ...more
1750 KW Caterpillar #3512C-HD, 60 HZ 1800 RPM 480 Volts, ECS 100 Control Panel
Ring Power Systems | Saint Augustine, FL
Category: Diesel Generators
Seller: Ring Power Systems
Location: Saint Augustine, FL
Mfr: Caterpillar
Model: 3512C-HD
Year: 2025
Caterpillar 1750 kW Package Diesel Generator Set, 60 Hertz, with Factory Model 3512C-HD Engine, UL2200 Listed, EPA Stationary Emissions Standby Compliant, CAT Premium ECS100 Generator Control Panel, Auto Start / Stop, Engine Safety Shutdowns, CAT SR5 Form Wound, DVR, Space heater, Generator Gen-Temp Monitoring Pkg ...more
Vantec #PT750/R8 Horizontal Drum Chipper
Carolina Machinery Sales | Monroe, NC
Category: Wood Chippers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Vantec
Model: PT750/R8
This Wood Drum chipper PT750 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, rubberized conveyor belt and Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does ...more
JUST ADDED!
3750 KW Cummins C3750D5, Diesel Generator Set, Cummins QSK95 engine, 50 Hz
Atlantic Power & Equipment | Atlantic City, NJ
Category: 50 Hz Diesel Generators
Seller: Atlantic Power & Equipment
Location: ATLANTIC CITY, NJ
Mfr: Cummins
Model: C3750D5
Year: 2026
C3750D5 Cummins 3750kw 50Hz QSK95 Diesel (NON-EPA) Generator Set, Cummins® commercial generator sets are fully integrated power generation systems providing optimum performance, fuel economy, reliability and versatility for stationary Standby, Prime and Continuous power applications. s Cummins Heavy-Duty Engine - ...more
1700 Ton, Loewy, Copper Rod/tube Extrusion Press w/ Internal Piercer, Oil Hydraulic 4-tie rods, 52" stroke, 2750 PSI
National Machinery Exchange | Newark, NJ
Category: Extrusion Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Loewy
Manufacturer.Loewy, Tie Rod Configuration.4-tie rods, Design.Direct Horizontal Extrusion, Product.Copper Rod/Bar and Tube, Piercer.Internal Piercer, Piercer Tonnage.145 ton, Press Max Tonnage.1700 ton, PSI.2750, Max Stroke.52", Billet Diameter Range.4.8"-7", Billet Length.16.5" (17" max length), Pumps.4 qty - Oilgear ...more
Gleason #275G, gear shaping machine, 21" gear width, 13" X, 14" Y, 19" Z, Fanuc 160i-MB, 2008 (4 available)
GCH Machinery | Warren, MI
Category: Gear Shapers
Seller: GCH Machinery
Location: Warren, MI
Mfr: Gleason
Model: 275G
Year: 2011
Gleason 275G Phoenix II CNC Straight & Spiral Bevel Gear Grinder (2011) with the capability of grinding a gear from a solid blank. Fanuc 160i-MB CNC Controls, 10:1 Gear Ratio, 1" Range tooth size, and 2" Max Tooth Width., Gleason Phoenix II CNC Straight & Spiral Bevel Gear grinder, Model 275-G, S/N 1006506 ...more
JUST ADDED!
MV Manufacturing Group, 800 amp motor control cen, 575 Volt, 800 amp horizontal & vertical bus, IP42 Enclosure, 2015
Lenmark Industries | Langley, BC
Category: Motor Control Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Mv Manufacturing Group
Model: 800 AMP MOTOR CONTROL CEN
Year: 2015
SKU: 137975, Year: 2015, Condition: Used, Additional :, Original Designation: MCC-N Tertiary Crushing & Screens area, Bus Voltage: 575 V, Short Circuit Rating: 25 kA rms Sym, Board Rated: 800 A, Horizontal Busbar Rated: 800 A, Vertical Busbar Rated: 800 A, Form: 4A, Enclosure: IP42 custom built, Main Equipment ...more
Featured
Powder coating, Sef Italia up to 8 meter or 26' part length, small fraction of replacement cost
MachineCo | Montreal, QC
Category: Paint and Powder Systems
Seller: MachineCo
Location: Montreal, QC
Mfr: Sef Italia
Model: POWDER COATING
Year: 2014
All the plant is manufactured according the UL-CSA rules, Material to be painted : aluminium or steel profiles and sheets -, Medium charge dimension : mm 6500 x 300 x 1500 (H). -, Maximum charge dimension : 8000 x 500 x 1500 mm., In this case the bars holding pieces should be loaded at a double step -, Maximum sheets ...more
2000 Ton, Sumitomo, Forging Press, 350mm slide stroke, 850mm shut height, 50mm KO
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sumitomo
2000 Ton SUMITOMO FORGING PRESS, TYPE. TFPX-2000 / TWIN CON-RD TYPE MECHANICAL, CAPACITY. 20 MN, SLIDE STROKE. 350mm, MAX SPEED. 25 tpm, ECCENTRIC SHAFT. 75 rpm, SHUT HEIGHT. 850 mm, SLIDE ADJUSTMENT. 7.0 mm, SLIDE HARD PLATE. 1200 R-L, 1300 F-R, BED HARD PLATE. 1320 R-L, 1300 F-R, SIDE OPENING. 900mm, SLIDE KNOCKOUT. ...more
150 KW Cummins #C150D6D, diesel generator set, 277/480 Volts, 324 HP @ 1800 RPM, QSB7-G5 NR3 engine, EPA Tier 3, sound attenuated enclosure, 350 gal. sub-base fuel tank 2026, new
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: C150D6D
Year: 2026
*****ETA April 21, 2026***** New Cummins 150 kW standby (135 kW prime) diesel generator set, model C150D6D. Cummins QSB7-G5 engine rated 324 HP at 1800 RPM, EPA Tier 3 emissions, SN-S99098939. 3/60/120/208V, 12 lead reconnectable to 480V and other voltages. 200-600 Amp main-line circuit breaker. PMG permanent magnet ...more
150 KW Cummins #C150N6, Natural gas / propane generator set, 120/208 Volts, 240 HP @ 1800 RPM, QSJ8.9G engine, EPA Certified, sound attenuated enclosure, 2025, new
Central States Diesel Generators LLC | Waukesha, WI
Category: Natural Gas Or Dual Fuel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: C150N6
Year: 2025
New Cummins 150 kW standby natural gas / propane generator set, model C150N6, SN-I250493049. Cummins QSJ8.9G engine rated 240 HP at 1800 RPM, SN-99621726, EPA certified. 3/60/120/208V, 12 lead reconnectable to other voltages. 200-600 Amp adjustable 100% rated main-line circuit breaker. PMG permanent magnet generator. ...more
24" width x 60" D x 24" H Abar, horizontal vacuum furnace, 2450°F, 2-bar, 150 KW, 1980
Heat Treat Equipment Co | Canton, MI
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Abar
Year: 1980
Manufacturer: Abar, Type: Horizontal Vacuum Furnace, Model-Year: HR 34 (2 Bar, 15 psi), BM555, 1980, Load-Area: 24” wide x 60” deep x 24” high, Overall-Dimensions: 185” wide x 112” high x 295” deep, Voltage: 480V / 3-Phase / 60Hz, Max-Temp: 2450°F, Capacity: 2,000 pounds ...more
150 kW Cummins #C150N6, Natural Gas/Propane Generator, 240 HP #QSJ8.9G engine, EPA cert, UL2200, sound attenuated enclosure, PowerCommand 2.3 ctrl, warranty, 2025
Aaron Equipment Co | Schaumburg, IL
Category: Natural Gas Or Dual Fuel Generators
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cummins
Model: C150N6
Year: 2025
unused cummins 150 kw natural gas/propane generator c150n6, ul2200, pmg, sound enclosure, 2025, sn-b250415803. rated 150 kw. cummins qsj8.9g engine rated 240 hp at 1800 rpm, sn-99537479, epa certified. 3/60/120/208v, 12 lead reconnectable to other voltages. 200-600 amp adjustable 100% rated main-line circuit breaker. ...more
350 KW Elliott, steam turbine generator set, single stage turbine Induction Generator 480 Volts, 3ph, 60 hz
NSV Energy, LLC | Canton, GA
Seller: NSV Energy, LLC
Location: Canton, GA
Mfr: Elliott
350 KW BACK PRESSURE STEAM TURBINE GENERATOR SET, One (1) Steam Turbine Generator Skid consists of, Elliott Type DYRPG serial number B102321 rated Power 600 hp, Inlet steam 200 Psi/395 deg F Maximum 250 Psi/600 deg f, Exhaust steam 30 Psi Maximum 60 Psi, Steam flow 35.52 lbs/KWH @ 350 kw 12,432 lbs/hr, Running speed ...more
50 KW Generac / Generac #SG050, Natural Gas or Propane Generator
Abraham Generator Sales Co | Cooperstown, ND
Category: Natural Gas Or Dual Fuel Generators
Seller: Abraham Generator Sales Co
Location: Cooperstown, ND
Mfr: Generac
Model: SG050
Year: 2014
50 KW GENERAC / FORD NATURAL GAS OR PROPANE GENERATOR, -Mfg. 2014, -Model Number: 17421970100, -Serial Number: 9073793, -Type Code: SG0050AG035.4V18HPLYA, -Standby Rated at 50 kw / 50 kva, -Setup 120/240 Volt, Single Phase ONLY (208.3 Amps), -NOT Reconnectable to Other Voltages, -4 Wire, -60 Hertz, 1800 RPM, 1.0 PF ...more
Vertiv Liebert #EXM, AC uninterruptible power supplies with ELPM182-00002 batteries
iGAM | Detroit, MI
Category: Uninterruptible Power Supplies (UPS)
Seller: iGAM
Location: Detroit, MI
Mfr: Vertiv
Year: 2019
This listing is for a used Vertiv Liebert EXM industrial uninterruptible power supply system. The Liebert EXM series UPS provides high-efficiency backup power protection for data centers, industrial facilities, manufacturing plants, and critical electrical infrastructure., See photos for., Part No: 51SA150BBA00S48 ...more
1750 KW Kohler, 8.7 MW, 2014-2016 (5 available)
Safe Power Distributors, Inc. | Palm Harbor, FL
Category: Diesel Generators
Seller: Safe Power Distributors, Inc.
Location: 34683, FL
Mfr: Kohler
**FOR SALE – COMPLETE GENERATOR & POWER PACKAGE**, **Package Price: $2,500,000 USD**, **Quantity (5) – 2014–2015 Kohler / MTU Tier 2 Diesel Generator Packages**, • 1750 kW, • 4160 Volt, • 3 Phase, 60 Hz, • Kohler Decision Maker 550 control panel, • 24V DC electric start ...more
176 Ton, Stock Minster MMC Titan #TM1-160, single point gap press, 7.87" stroke, 15.35"throat, 17.72"Shut Height, 3.94"adj., 20-50 SPM, 2025
Nidec Press & Automation | Macomb, MI
Category: Gap Frame Single Crank Press Machines
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Titan
Model: TM1-160
Year: 2025
Tonnage 160 Metric Tons (176 U.S. Tons), S.H. on Bolster, SDAU 17.72" (550 mm), Stroke 7.87" (200 mm), Bolster Size 49.21" x 29.92" (1250 x 760 mm), Speed 20-50 S.P.M., Model Number. TM1-160-L, Press Type. Standard, Capacity. 160 Metric Tons (176 U.S. Tons), Torque Capacity from BDC. 6 mm (0.240 in), Press Slide ...more
600 kW Cummins #DQCA, Diesel Generator, 1220 HP #QSK23-G7 NR2 engine, Tier 2, UL142 Fuel Tank, sound attenuated enclosure 1, PowerCommand 2100 ctrl, 685 hours, 2009
Aaron Equipment Co | Schaumburg, IL
Category: Diesel Generators
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cummins
Model: DQCA
Year: 2009
used- cummins 600 kw standby (545 kw prime) diesel generator, model dqca, sn-c090235145. cummins qsk23-g7 nr2 engine rated 1220 hp at 1800 rpm, sn-00319501, epa tier 2 emissions. 3/60/277/480v, 12 lead reconnectable to other voltages. 1200 amp main-line circuit breaker. pmg permanent magnet generator. oversized ...more
Kieserling Solingen, straightening machine for conical bars No. 92
National Machinery Exchange | Newark, NJ
Category: Bar, Pipe and Tube Straighteners
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Kieserling
Machine: Straightening machine (smoothing roller) for continuous bars, Manufacturer: Kieserling Solingen, Modernized: No, Power grid: 500V,50Hz, IT grid, Workpiece, Conti rods of 26 meters, Data feed device:, Diameter: 60-160 mm, Max. rod length: 26,500 mm, Max. bar weight: 4,180 kg, Feed speed: 0.05-2.0m/min., Roll ...more
150.0 Kva Eaton #93PM-150-3,480 Volts, uninterruptible power supplies System, Refurbished, (5 available)
Critical Infrastructure Group LLC | Sparks, NV
Category: Uninterruptible Power Supplies (UPS)
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Eaton
Eaton 93PM – 150 kW UPS System – 480V -3W, Rated: 150 kVA / 150 kW, Input Voltage: 480V VAC, 3 Phase, 3 Wire plus GND. 60 Hz, Input Configuration: Single Input, UPS Output: 480V VAC, 3 Phase, 3 Wire plus GND. 60 Hz, Maintenance Bypass: 3 Breaker Line and Match Maintenance Bypass, Dimensions: 37.0″ ...more
Recard #Crescent former tissue machine, 65 TPD
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Recard
Model: CRESCENT
Year: 1993
Recard Crescent Former Tissue Machine, Manufacturer: RECARD, Type: Crescent former, Year of construction: 1993, Material width on reel: 2750 mm, Production speed: up to 1250 m/min, Grammage: 11 to 23 GSM, Drying capacity: 65 ton/day, Raw material: Virgin pulp, Electrical drives: 400V 50 Hz, Electrical drive type: ...more
165" Erbend #MFA4225, 2021
Machine Tool Technologies | Milwaukee, WI
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFA4225
Year: 2021
Make Erbend, Model MFA4225, Year of MFG 2020, Working Length 4200mm (13.75’), Capacity 12g, Upper Beam Stroke 135mm, Folding beam type Combi, Backgauge Depth U Shape, Closed Hem Capacity 20g, Electrics 3 phase, Opening height (without tools) 250 mm, Motor Power (Servo) 2 X 3,5 kW, Transmission system Ballscrew ...more
700 KW Caterpillar #3412C, 277/480 Volts, Weather Enclosed, Base Fuel Tank, 583 hours, 2000
NineX Power Systems | Spring, TX
Category: Diesel Generators
Seller: NineX Power Systems
Location: Los Angeles, CA
Mfr: Caterpillar
Model: 3412C
Year: 2000
Used CAT 3412C Generator Set; 2000 Model – 583 Original Hours; 700kW Standby Rated; 480/277V; Weather Enclosure; Base Fuel Tank; EMCP 2 Controller; Breaker; Jacket Water Heater, Battery Charger; Three Matching Units Available; Exterior Freshly Painted – Cleaned – Serviced – Load Tested ...more
2-1/2" x 0.12" Turek & Heller #WU-20-10, Stainless Steel Tube Mill, Tig Type, L-R, 25 FPM, Universal Drive, Single Point Adjustment
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Turek & Heller
Model: WU-20-10
Manufacturer. TUREK & HELLER, Model. WU-20-10, Serial #.1094, Line Direction. Left to Right, O.D. Capacity.625 - 2.5", Wall Thickness.020 -.120, Speed. Up to 25 FPM, Consisting of:, LITTELL PAYOFF REEL, Single Coil.40OOlb. capacity, Electric brake, Coil I.D.15"-20", Max. Width.12", TUREK & HELLER TUBE MILL ...more
281 lb. GFM #SKK10, rotary forging machine, 1250 Kn, 4 hammers, hydraulic counter-holder
National Machinery Exchange | Newark, NJ
Category: Power Hammers and Forging Hammers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Gfm
Model: SKK10
Forging box:, Shear force per hammer: 1250 kN, Number of hammers: 4, Strokes per min: 1500 / min, Diameter adjustment range: 60 mm, Forging eccentricity: 2.5 mm, Hammer length: 106 mm, Bar/Tube diameter max: 58 mm, Clamping head:, Feed force: 1-70 kN, Feed: 5-500 mm/s, Clamping head bed:, Workpiece length max: 175 mm ...more
Kent #CMD-70320, CNC oil country lathe, 70" swing, 8.3" bore, 4-Jaw chucks optional, Fanuc 0i-TD, 1.3 HP, new, #12882
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Lathes and Turning Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Kent
Model: CMD-70320
70" x 315" KENT USA MODEL CMD-70320 CNC OIL COUNTRY LATHE - NEWSTANDARD ACCESSORIESCNC controller: FANUC 0i-TD or FAGOR 8055i AC spindle motorAuto lubrication systemCoolant systemSpindle Oil CoolerH4 or V8 hydraulic turretChuck guard and Turret guard, Control Panel Moving Along with CarriageRear Splash Guard and Chip ...more
Bonfigliolo #Squalo-3000, Bonfiglioli used vertical shear, 30 TPH, diesel or electric, 30 sec cycle time, 2020
Alan Ross Machinery Corp | Zion, IL
Category: Hydraulic Shears
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Bonfiglioli
Model: SQUALO-3000
Year: 2020
2020 Bonfiglioli Squalo 3000 Shear: Used, efficient, adaptable for various materials, with simple robust structure. Diesel/electric options, 30 T/Hr capacity, low fuel consumption., ADVANTAGES, + Movable and easy to install, + Diesel or electric, + Low fuel consumption, + Easy feeding for long materials, + Low ...more
150.0 KVA Eaton 93PM-200, 480 Volts 480 Volts uninterruptible power supplies system, 3-wire plus GND
Critical Infrastructure Group LLC | Sparks, NV
Category: Uninterruptible Power Supplies (UPS)
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Eaton
Eaton 93PM – 150 kW UPS System – 480V 3W, Rated: 150 kVA / 150 kW, Input Voltage: 480V VAC, 3 Phase, 3 Wire plus GND. 60 Hz, Input Configuration: Single Input, UPS Output: 480V VAC, 3 Phase, 3 Wire plus GND. 60 Hz, Maintenance Bypass: 3 Breaker Line and Match Maintenance Bypass, Dimensions: 46.7″ ...more
5.5" x .2" (139mm x .200" ) Ocevi Pipe Mill Line, 1990, upgraded 2018
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Year: 1990
Year 1990 (Ugraded in 2018), Tube Diameter: 48mm - 139mm, Structurals: 40mm x 40mm - 100mmx 100mm, Wall Thickness: 1.0mm - 5.0mm, Line Speed: 100 Meters/min, Shaft Diameter: 130mm, Tooling: OD 48mm, 63mm, 76mm, 89mm, 127mm, 139mm, Square: 50mmx 50mm, 60mmx 60mm, 70mm x 70mm, Rectangular: 40mm x 80mm, 60mm x 80mm, 80mm ...more
Cat 416F2, Backhoe Loader, 3737 hours, S/N: HWB01994, 2019
NMC - Heavy Machinery | Omaha, NE
Category: Backhoe Loaders
Seller: NMC - Heavy Machinery
Location: Omaha, NE
Mfr: Caterpillar
Model: 416F2
Year: 2019
416F2 BHL ST HRC, Air Conditioner, Air Suspension Seat, BACKHOE/INDUSTRIAL LOADERS, BATTERY, HEAVY DUTY, BELT, SEAT, 2" SUSPENSION, BUCKET, HOE, (NONE), BUCKET-GP, 1.25 CYD, CAB, STANDARD, CONTROLS, BACKHOE PATTERN, Controls, Lever, COUNTERWEIGHT, 1070 LBS, COUPLING,QD,THREADED WITH CAPS, CUTTING EDGE, TWO PIECE ...more
Gloe Corporation Mobile Extraction System, recovery rates of 2 gpm at only 160f and 25" hg, 100lbs of ground material or about 60lbs flower at a time
Aaron Equipment Co | Schaumburg, IL
Category: Cannabis Processing Machinery
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Gloe
used- gloe corporation mobile extraction system. recovery rates of 2 gpm at only 160f and 25"hg (more heat + more vacuum = faster recovery) ability to recirculate to further concentrate crude. can batch 100lbs of ground material or about 60lbs flower at a time. easy production of oil; easy scalability; no building ...more
No. AS41 Wafios, Spring Coiler Line, 3.6mm wire, 30mm spring outside dimension, 13000mm feed
National Machinery Exchange | Newark, NJ
Category: Wire Spring Coilers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wafios
Model: AS41
CONSISTING OF:, WAFIOS SPRING COILER, MODEL. AS41, WIRE DIAMETER. 1.0 - 3.6mm, OUTSIDE DIAMETER OF SPRING. 10 - 30mm, MAX. LENGTH OF FEED WIRE. 13000mm, FEED SPEEDS. 90 & 75mm/MIN, MAX. OUTPUT AS41 ALONE. 78 SPRING/MIN., MAX. OUTPUT COMBINED WITH, FOA41 EYELET MACHINE. 58 SPRING/MIN., WAFIOS WIRE PAYOFF ), MODEL. ...more
Daewoo Doosan #Puma-4100B, CNC universal turning center, 31.2" swing, 15" chuck, 4.6" bar, 44.7" centers, 23.2" dia., 38.5" lgth, 2-Axis, Fanuc I, tailstock, Steady Rest, chip conveyor, tool presetter, 2019
Used CNC LLC | Huntley, IL
Category: CNC Lathes and Turning Centers
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Daewoo Doosan
Model: PUMA-4100B
Year: 2019
Used 2019 DOOSAN PUMA 4100B CNC Turning Center. With a 31.2" swing over bed, 43" between centers, and 21.7" turning diameter, it's Doosan EZ Guide, tool presetter, manual steady rest and chip conveyor for efficient machining., 2019 DOOSAN PUMA 4100B, Swing Over Bed. 31.1", Machining Length. 38.5", Distance Between ...more
24" width x 60" D x 24" H, Abar vacuum furnace, 2250°F, electric, #V-1131
Heat Treat Equipment Co | Canton, MI
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Abar
Manufacturer: Abar, Type: Horizontal 2Bar Vacuum Furnace, Model/Year: HR 34 (2 Bar, 15 psi), BM555, 1980, Load-Area: 24” wide x 60” deep x 24” high, Overall-Dim's: 185” wide x 112” high x 295” deep, Approx-Weight: 12,000 pounds, Voltage: 480V / 3-Phase / 60Hz, Max-Temp: ...more
Bodor #M500-120-120, Fiber Laser Metal Tube Cutting Machine, 12000 watt, NEW
Smith Machinery Co | Ames, IA
Category: CNC Lasers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Bodor
Model: M500-120-120
FIBER LASER CUTTING MACHINE: Laser Power 12kw Freight & Tariff Included Installation & Training Cost Included Transportation By Sea Loading Container 3*40'GP+3*40'OT+1*20'GP Payment Terms 30% down payment, 70% before shipment. Warranty Three years limited warranty for main parts. One year free ...more
Featured
44000 lb. Irizar #WP-20, welding positioner, For Sale or Rent
Irizar Heavy Industries Inc | Edmonton, AB
Category: Welding Positioners
Seller: Irizar Heavy Industries Inc
Location: Edmonton, AB
Mfr: Irizar
Model: WP-20
Load Capacity:, 20.00 MT @ 600 mm GC, 17.10 MT @ 700 mm GC, 15.00 MT @ 800 mm GC, 13.30 MT @ 900 mm GC, 12.00 MT @ 1000 mm GC, 10.00 MT @ 1200 mm GC, 8.50 MT @ 1400 mm GC, 7.50 MT @ 1600 mm GC, 6.60 MT @ 1800 mm GC, Eccentricity: 200 mm, Rotation speed: From 0.05 to 0.50 RPM, Tilt speed: From 0.01 to 0.10 RPM, Table ...more
Cat 416-07, Backhoe Loader, 310 hours, S/N: H8P01256, 2023
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Backhoe Loaders
Seller: Foley Equipment - Heavy Machinery
Location: Call Foley, KS
Mfr: Caterpillar
Model: 416-07
Year: 2023
;- FOLEY WORK READY -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, 2023 MODEL, AIR CONDITIONER, T4F, BELT, SEAT, 2" SUSPENSION, BUCKET, LOADER (NONE), CAB, STD, COLD WEATHER PACKAGE, 120V, COUPLING, QD, THREADED CAPS, CTWT, 1015 LBS, DISPLAY, STD, ENG, 70KW, C3.6, T4F, HYD, GP, 6FCN ...more
Recycling system, Milacron Gamma Meccanica, 7.1" dia, 2010
Arlington Machinery | Lake Zurich, IL
Category: Recycling Equipment
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Gamma Meccanica
Year: 2010
Used 180mm Milacron/Gamma Meccanica Recycling System 180mm Diameter Single Screw Extruder, 37:1 L/D Water Cooled Dual Vented Barrel 700hp Marathon Electric AC Motor, 1792 RPM, 460 Volt - 780 Amp (280 Idle Amps) Koellmann Gearbox, Model UNEX 9.13, 16.86 Gearbox Ratio 66" Diameter Densifier Bowl 250KW ABB AC Motor, 1790 ...more
6.6" x 0.3" DMC, HF Tube Mill & Automatic Packaging Line, 65.6-196.9 FPM, 24" ID, 63"-78.7" outside dimension, 168mm x 7mm, 2018
Midwest Machinery LLC | Livonia, MI
Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Dmc
Year: 2018
Make: DMC (Korea), Year New: 2018, Material: HR, CR, Pipe Diameter: 50mm - 168mm, Wall Thickness: 1.4mm - 7mm, Speed: 20 - 60 mpm, Pipe Cut Tolerance: 2mm, Max Pipe Length: 6 - 12 meters, Coil Width: 150mm - 600mm, Coil ID: 610mm, Coil OD: 1600mm - 2000mm, Coil Weight: 12 ton, Entry Floor Standing Coil Cat, Mandrel ...more
Bodor #A3T Series, fiber laser cutter, 6000 watt, 5' x 10', NEW
Smith Machinery Co | Ames, IA
Category: CNC Lasers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Bodor
Model: A3T
Working Area 5' X 10' (3048mm x 1524mm) Max. Linkage Speed 328'/MIN (100m/min) Tube Size Range (Round Tube) 20-230mm Tube Size Range (Square Tube) 20 - 160mm Tube Size Range (Rectangular Tube) 170mmSide length20mm Tube Size Range (Circumscribed Circle ) Diameter230mm Pneumatic Chuck Maximum Load 200kg ...more
450 KW Scania, trailer mounted diesel generator package, Tier 4F, 2024
Collicutt Energy Services | Red Deer, AB
Category: Diesel Generators
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Scania
Year: 2024
Product Beautiful Custom Scania Diesel Genset, PRICE $296,175.00 USD, Ready to add to your Rental fleet. Meticulously manufactured Genset. Built around Scania's DC16 V8 Tier 4 Final engine - able to meet emission standards without the need of a Diesel Particulate Filter., Engine, Scania DC16-084A, EPA certified ...more
Munch #650, Pellet Mills, Qty. 2, 60 HP Cooling Fan, (2) 200 HP Motors
Alan Ross Machinery Corp | Zion, IL
Category: Pellet Mills and Briquetting Machines
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Munch
Model: 650
(2) Units - One Without Motors., (1) LOT - Spare Dies and Rolls., (1) Cooling Fan., --- Factory ---, Motor and Drive:, * Main Drive Configuration: Dual-motor synchronous drive system, * Motor Power: 2 x 75 kW to 2 x 110 kW (approx. 200 - 300 HP combined), * Transmission Type: High-torque V-belt drive, * Die Linear ...more
3-1/2" x .08" -.250" Mannesmann Demag tube mill, mandrel type double uncoiler
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mannesmann Demag
Tube Diameter.1" - 3-1/2" (26.7mm - 88.9mm), Wall Thickness.0.080" -.250" (2.0mm - 6.3mm), Mill Speed.400 ft/min (120 m/min), Max, Tube Length.5' - 46' (1.5M - 14M), LINE CONFIGURATION, DOUBLE UNCOILER, MANDREL TYPE, Coil ID.24" (610mm), Strip Width.3" - 11" (75mm - 280mm), Snub Roll, Peeler Table, Crop Shear ...more
Eagle #EAGLE-TALL-PRO-X, 100-400 FPM, 2015
ESS Industrial | Woodruff, SC
Category: Inspection Equipment
Seller: ESS Industrial
Location: Woodruff, SC
Mfr: Eagle
Model: EAGLE-TALL-PRO-X
Year: 2015
, Inspection Coverage: Side-View Detection; from 275 mm (10.8) Height at 127 mm (5) Diameter to 212 mm (8.3) Height at 203 mm (8) Diameter, Inspection Modes: SimulTask 4 PRO standard inspection modes include contaminant, bone, missing item, clip, void, premium, shape/size, position, fill level, count, zonal mass, mass ...more
Tarus #PMT-5, bridge mill, 49 automatic tool changer, 120" X, 113" Y, 46" Z, 18000 RPM, HSK63A, 5-Axis, Heidenhain TNC640, hydraulic clamping, 2018
Machnet | Santa Monica, CA
Category: Vertical CNC Machining Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Tarus
Model: PMT-5
Year: 2018
The 2018 TARUS PMT 5-Axis Bridge Mill s robust Heidenhain TNC640 control and a 49-tool automatic changer, enabling high-efficiency machining. Its full 5-axis capability includes a hydraulic clamped 3-axis function, delivering exceptional precision and versatility for complex parts. Built with a massive box section ...more
30" x 62" I2S / Mesta, 2 Hi Temper Pass Mill, Carbon Steel, L-R, 2160 FPM, Hydraulic Screwdown, GE 9070 PLC
National Machinery Exchange | Newark, NJ
Category: 2 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: I2s
Mill Manufacturer - MESTA, Modernized in 1998 by I2S, Typical Products - Carbon Steel, 2 mm to.15 mm up to 1422 mm wid,.080 to.006" thickness up to 56" wide, Roll Size: 762 mm (30"), Max 30" Min 28", Roll Face: 1575 mm (62"), Coil ID: 570/600 mm (22.5/24"), Coil OD Max: 1676 mm (66"), Coil Weight: 20 tons, Mill ...more
JUST ADDED!
Fully Rotational Bucking Machine #AUBU-340/635, 70000 - 100000 lb/ft.
Pantera Machines | , AUSTRALIA
Category: Bucking Machines
Seller: Pantera Machines
Location: , AUSTRALIA
Model: AUBU-340/635
Year: 2025
Fully Rotational Bucking Units, 178mm bore to 635mm bore option available. Meets Premium Thread Make Up ( vam,grant prideco ) Screw speed Low: 0.6-4.8 RPM, stepless adjustment during up/down process; High: 1.5 13 RPM, stepless adjustment during up/down process Pantera Machines | AUBU-178-635 Parameter Value Buckling ...more
66" Davis Standard, coex sheet line, 4.5" & 2" extruders, 32:1 L/D ratio, 300 HP, 2000
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Davis Standard
Year: 2000
66" Wide Sheet Line Consisting Of The Following Pieces: 4.5" Davis Standard 45IN45 Extruder, 32:1 L/D Ratio, 17.49:1 Gearbox Ratio, 300 HP 1788 RPM Marathon AC Inverter Duty Motor(NEW IN 2016) And Mitsubishi Drive(NEW IN 2016), Vented Barrel With 5.36 HP Vacuum Pump, 6 Zone Air-Cooled Barrel, 10 Die Zones, 600 AMP ...more
96.5" x .98" Cut-To-Length line, 70000 lb., complete with coil car, uncoiler, 2010
National Machinery Exchange | Newark, NJ
Category: Cut-to-length Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Year: 2010
96.5" (2450MM) X 25MM X 70,000# CUT-TO-LENGTH LINE, COIL WEIGHT70000 POUNDS, WIDTH96.5 INCHES, THICKNESS.984 INCHES, ID32 INCHES, MAX OD94.5 INCHES, YEAR: 2010, MATERIAL: HOT ROLLED STEEL STRIP (SS, S55C, SPAH, DAS, ATS ETC.), THICKNESS: 3.2MM - 25MM, COIL WEIGHT: 35 TONS, COIL ID: 508MM, 610MM, 762MM, 812MM, COIL OD: ...more
Recard #Crescent-Former tissue machine, 70 TPD, 1998
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Recard
Model: CRESCENT-FORMER
Year: 1998
Recard Crescent Former Tissue Machine, Manufacturer: RECARD, Type: Crescent former, Year of construction: 1998, Material width on reel: 2750 mm, Production speed: up to 1400 m/min, Grammage: 14 to 23 GSM, Raw material: Virgin pulp, Drive voltage: 400V 50 Hz, Drive type: (AC & DC 400V), DCS: Siemens S7-400 (Include ...more
Hitachi-Seiki #VS50, CNC vertical machining center, 39.3" X, 20" Y, 17.7" Z, 220 V., 3-phase
Lenmark Industries | Langley, BC
Category: Vertical CNC Machining Centers
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Hitachi-Seiki
Model: VS50
Year: 2000
SKU: 115997, Model: VS50, Year: 2000, Condition: Used, Spindle Taper: 7/24 taper, Cross Travel (Table): 20 ", Table Size: 1120 x 510 mm, CNC: Yes, Electrical :, Voltage: 220 volts, Phase: 3-phase, Additional :, Control Circuit Volts: 100 VAC, 24 VDC, Control Unit: SEICOS, Movement:, - X-Axis: 1000 mm, - Y-Axis: ...more
2.48" x .118" Korea Ind. HF tube mill, 63mm x 3mm, 2003
Midwest Machinery LLC | Livonia, MI
Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Year: 2003
Make: Korea Ind., Year New: 2003, Tube Diameter: 15.9mm - 63.5mm, Wall Thickness: 0.5mm - 3mm, Tube Length: 4 - 14 meters, Line Speed: 20 - 120 meters per minute, Double End Mandrel Uncoiler, Coil Width: 190mm, Coil OD: 1800mm, Coil ID: 505mm, Coil Weight: 2.5 ton, Entry Crop Shear & CO2 Welder, Floop Type ...more
610mm 24" ) x 14" mm Yoder/Mill Tech Rafted API Pipe Mill Line
Galaxie Corporation | Wayne, MI
Category: Tube Mills
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Yoder
Yoder/Mill Tech API Pipe Mill Line, Rafted Stands with Spare Set of Rafts, Upgraded By Mill Tech in 2008, Pipe Diameter: 219mm - 610mm (8" - 24"), Wall Thickness: 4.5mm - 14mm, Grades: API X70, API 5L X42 to PSL, API 5L X65 to PSL, Maximum Line Speed: 20 Meters/Min, Pipe Length: 6 - 18 Meter, Complete Line with:, 40 ...more
Parpas #XS63, 120 automatic tool changer, 236" X Travel, 118" Y Travel, 59" Z, 5k RPM, #50, 5-Axis, Heidenhein iTNC 530, Renishaw wireless touch probe, 2011
Machnet | Santa Monica, CA
Category: Gantry Type Machining Center
Seller: Machnet
Location: Santa Monica, CA
Mfr: Parpas
Model: XS63
Year: 2011
Parpas XS63 5-Axis Dual Head High Speed Gantry Milling Machine, 2011; 236" x 118" x 59", Heidenhein iTNC 530 Ctrl, Siemens Motors/Drives, 50 Taper, 5K & 20K RPM Heads, Probing, More, Parpas XS63 5-Axis High Speed Gantry Milling Machine, New: 2011, Travels:, X-Axis: 236", Y-Axis: 118", Z-Axis: 59", Rapid Traverse ...more
Vai/Seuthe, Direct Forming Tube Welding Line, 328 FPM, 2007
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Year: 2007
, Manufacturer: VAI / SEUTHE, Strip Width: 150mm - 400mm (5.91” - 15.75”), Strip Thickness: 1.5mm - 6.0mm (0.059” - 0.236”), Tensile Strength: 500N/mm2 (72,500 PSI), Line Speed: 100 Meters/Min, Max Square: 100mm x 100mm (3.94” x 3.94”), Square Min: 40mm x 40mm (1.57” x ...more
5" x 0.16" Dowon, HF Tube Mill, 0.06"-0.18" wall, 20" ID, 78.7" outside dimension, RL, 127mm diameter, 4mm wall, 2001
Midwest Machinery LLC | Livonia, MI
Category: Tube Mills
Seller: Midwest Machinery LLC
Location: Livonia, MI
Year: 2001
Make: Dowon Engineering (Korea), Diameter: 60mm x 127mm, Wall Thickness: 1.5mm - 4.5mm, Speed: 70 meters per minute, Direction: R - L, Year New: 2001, Power: 380V x 60Hz / 220V x 60Hz, Material: HR, CR, GI, HGI, Coil Width: 140mm - 400mm, Coil ID: 508mm, Coil ODL 2000mm, Coil Weight: 10,000Lbs, Mandrel Uncoiler ...more
Bodor #M500-120-120, Fiber Laser Metal Tube Cutting Machine, 6000 watt, NEW
Smith Machinery Co | Ames, IA
Category: CNC Lasers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Bodor
Model: M500-120-120
FIBER LASER CUTTING MACHINE: Laser Power 6kw Freight & Tariff Included Installation & Training Cost Included Transportation By Sea Loading Container 3*40'GP+3*40'OT+1*20'GP Payment Terms 30% down payment, 70% before shipment. Warranty Three years limited warranty for main parts. One year free ...more
13" x 20" Mannesmann Demag Skin Pass Mill, 2 Hi 1 Stand, 1990 / 1991 / 1993 / 1994
D & H Machinery Inc | Toledo, OH
Category: 2 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Mannesmann
Year: 1994
Year of Construction: 1990 / 1991 / 1993 / 1994, Type: 2 HI, Roll Diameter: Max. 330 mm, Min. 300 mm, Roll Length: 500 mm, Material Data:, Band Thickness Max.: 4,00 mm, Band Thickness Min.: 0,20 mm from 0,50 mm, to be winded on sleeve., Band Width Max.: 470 mm, Band Width Min.: 80 mm, Rolling Speed: Max. 150 m/Min. ...more
2" Tube Mill, 15.9mm - 63.5mm diameter, 3mm t, 120 MPM, 2003
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Year: 2003
, Year Manufactured: 2003, Capacity: 63.5 X 3.0tm/m, Pipe Diameter: 15.9- 63.5m/m, Wall Thickness:0.5t ~3.0tm/m, Pipe Length 4-14M, Line Speed: 20M ~ 120m/min, l) Uncoiler, Type: Double Swivel Type, Cap.: Hoop Width Max: 190m/m, Coil Out Dia. Max: 1,800m/m, Coil In Dia. Max: 508m/m, Coil Weight Max: 2.5ton X 2 ea, 2) ...more
8" x .4" Yoder/Thermatool, API Cage Forming ERW Tube Mill, 67" outside dimension, R-L
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
8" (203mm) YODER/THERMATOOL API CAGE FORMING ERW TUBE MILL, THIS IS A 8" (203MM) API TUBE MILL ALONG WITH ROLLER CONVEYOR & PIPE TRANSFER, TABLES TO STRAIGHTEN, END BEVEL, HYDROSTATIC TEST, NDT/ULTRASONIC TEST &, BUNDLE FINISHED API TUBES., CAPABILITY - 4.5"-8", WALL THICKNESS -.188"-.400" (4.7mm-10mm), COIL OD - ...more
Weg transformers, 72/96/120 MVA, new
Surus Inversa S.l | Madrid,
Category: Potential Transformers
Seller: Surus Inversa S.l
Location: Puerto Brisa, Colombia, Mexico
Mfr: Weg
Online auction of Transformers and large power reactors:, Transformer 500/34.5 kV – 72/96/120 MVA - 2 units, Transformer 500/34.5 kV – 96/128/160 MV- 2 units, Shunt Reactor con todos los accesorios. 23MVar, 500kV - 6 Units, Location: Puerto Brisa, La Guajira (Colombia). Condition: new material. Method of ...more
Herkules #P100WSB450x15000/13000 CNC roll grinder, Cardan shaft drive, 2007
Global Equipment International | Chalfont, PA
Category: Roll Grinders
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Herkules
Model: P100WSB450X15000/13000
Year: 2007
511" Wide (1300M) Herkules Roll Grinder, Year : 2007, Distance between centers : 15,000 mm, Max. grinding lenght : 13,000 mm, Max. diameter : 2000 mm, Drive motor power : 100 KW, Faceplate speed : 1-27, 3-82,3, 9,2-250 KW 1/min, Nominal torque : 30,000 Nm, Longitudinal adjustment, Travel : 3000 mm, Transverse ...more
JUST ADDED!
6.626" x 0.276" DMC, Tube Mill Line, 196.85 FPM, tooling, 2019
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Dmc
Year: 2019
, Manufacturer: DMC, Tube Outer Diameter Max: 168.3 mm (6.626”), Tube Outer Diameter Min: 50.8 mm (2.000”), Wall Thickness Max: 7.0 mm (0.276”), Wall Thickness Min: 1.4 mm (0.055”), Tube Cut Length Max: 12,000 mm (472.44”), Tube Cut Length Min: 6,000 mm (236.22”), Line Speed Max: 60 ...more
11" x 25" x 24" Waterbury-Farrel, Single Stand 4-Hi Mill, Non Reversing, 300 FPM, R-L, 1967
VX Machinery | Sylvania, OH
Category: 4 High Rolling Mills
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Waterbury-Farrel
Year: 1967
200" Max Gauge (5 mm) 47" O.D. (1190 mm) 16" I.D. (406 mm) 5700 Lbs Coil Weight (2610 Kgs) 20" I.D. (508 mm) 850 RPM Combination Pinion Gearbox: 12:1 Ratio, Steel4 High, Non Reversing24" (610 mm)19" Wide (482 mm)0.035" Max Gauge (0.88 mm)300 FPM (91 MPM)Right To LeftClosed Top, Cast11" Diameter x 24" Face (279 mm ...more
Complete Gold and Silver CIL Process and Recovery Concentrator Plant
Machinery & Equipment Co | Brisbane, CA
Category: Complete Manufacturing & Power Plants
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Complete Gold and Silver CIL process and recovery concentrator plant, includes feed and crushing circuit, ANI FLSmidth SAG and Ball Mill circuit, precious metal recovery via carbon in leach process and electrowinning. The final product from the plant was dor which was shipped off-site to a refinery. Offered with ...more
Tsugami #S206, .79" diameter, 9.8" length, Fanuc 32i-MB, Edge Minuteman 320 SE bar feeder, Tri-Mist collector, 2012
Machine Tool Bids | Chicago, IL
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Tsugami
Model: S206
Year: 2012
MACHINE, Max Turning Diameter: 0.79 (20 mm), Max Turning Length: 9.843 (250 mm), Max Turning Length with Gripping Unit: 8.26 (210mm), Max Bar Capacity: 0.79 (20 mm), Max tool positions: 25, Max. Main Spindle Drilling Diameter: 0.39 (10 mm), Max. Main Spindle Tapping Diameter: M8, Max. Back Spindle Chucking Diameter: ...more
118" x .79" Spiral Welded Tube Factory, 35 Ton
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
SPIRAL WELDED TUBE FACTORY 3000 X 20MM X 35 TON, COIL WEIGHT AND DIMENSIONS, Max. Coil Weight- 35 ton, Material Coil Width- 2000mm, Material Coil Thickness- 7mm to 20mm, Material Coil ID Range- 508mm - 800mm, Material Max Coil OD- 2000MM, SPIRAL WELDING MACHINE CAPACITY, Diameter Range: 800mm to 3000 mm, Thickness of ...more
20" x 32" Metso-Outotec 2-Stage crush and screen package
D'Angelo International | Bellingham, WA
Category: Crushers
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Metso-Outotec
Metso-Outotec 2-Stage crush and screen package:, -Metso C80 Jaw Crusher, -20" x 32" feed opening, -55mm Closed side setting, -75 kW (100 HP) Motor, 1800 RPM, Squirrel Cage, -Metso HP100 Cone Crusher, -Standard Cone with coarse liners, -16mm Closed side setting, -90 kW (120 HP) Motor, -Metso Vibrating Grizzly Feeder ...more
24" Fabric Making Line, BFE #PP Meltblown, automaitc loader, hopper dryer, single screw extruder
Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Bfe
Model: 24 FABRIC MAKING LINE
One (1) BFE99 24" (600mm) PP Meltblown Fabric Making Machine, Automatic loader ZJ200 1 set, Hopper dryer STG-U160 1 set, 65/33 Single screw extruder 22kw 1 set, 600mm Hanger type SPINNERET and heating pipe 1 set, 50kw Air heating box 1 set, Screen changer 1 set, Gear Pump 1 set, 22kw Blower for mold 1 set, Forming ...more
Wegoma WSA2-WPA4, Window Line, 50+ units/8hrs. shift, 2-head horizontal welder, cleaning machine, 2008
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Wegoma
Model: WSA2-WPA4
Year: 2008
WEGOMA Complete CNC Window Profile Machining LineHigh quality German manufactured machine line for the fabrication of Aluminum and uPVC window profiles and suitable for small to medium sized fabricators. Capable of producing up to 50+ completed units in an 8 hour shift. This line is considered semi-automated with ...more
Hot Dip Continuous Galvalume And Galvanizing Line (cgl), 1250mm
National Machinery Exchange | Newark, NJ
Category: Galvanizing and Galvalume Lines
Seller: National Machinery Exchange
Location: Newark, NJ
I., 1. Thickness 0.25-1.0mm, 2. Width 600-1,250mm, 3. Coil Entry Coil Weight MAX.25T/C, Entry Coil OD/ID 2,150/508(610)?, Exit Coil Weight MAX.15T/C, Exit Coil OD/ID 1,850/508?, 4.Line Speed Entry 20-130m/min, Center 20-100m/min(thin gauge is 130m/min), Exit 20-130m/min, 5. Line Length 174.4m(Strip Length:400m when ...more
Tsugami #S206, swiss type automatic screw machines, .79" diameter, 9.843" length, Fanuc 32i-MB, Edge Minuteman 320 SE bar feeder, 2012
Machinery Marketing International | Chicago, IL
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Tsugami
Model: S206
Year: 2012
6-axis| 20mm Tsugami with bar feeder, Max Turning Diameter: 0.79 (20 mm), Max Turning Length: 9.843 (250 mm), Max Turning Length with Gripping Unit: 8.26 (210mm), Max Bar Capacity: 0.79 (20 mm), Max tool positions: 25, Max. Main Spindle Drilling Diameter: 0.39 (10 mm), Max. Main Spindle Tapping Diameter: M8, Max. Back ...more
Tsugami #S206, swiss lathe, .79" diameter, 9.843" length, Fanuc 32i-MB, Edge Minuteman 320 SE bar feeder, chip conveyor, TriMist collector, 2018
Machinery Marketing International | Chicago, IL
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Tsugami
Model: S206
Year: 2018
The 2018 Tsugami S206 Swiss Lathe with Fanuc 32i-Model B Control is built for high-precision, high-volume production of complex miniature components. Ideal for medical, aerospace, and electronics industries, it efficiently machines parts such as bone screws, surgical instruments, pins, and precision nozzles. Featuring ...more
Danobat #RCPI-1200, CNC internal grinder, 13.6" swing, 6.8" H of centers, 39" ID travel, 2000
GCH Machinery | Warren, MI
Category: CNC Internal Grinders
Seller: GCH Machinery
Location: Warren, MI
Mfr: Danobat
Model: RCPI-1200
Year: 2000
RCP1-1200 Danobat CNC Internal Grinder, Electronic Unit Balance System, SB-4500, Head Balance System, SB-4400-G, As Is, DANOBAT RCP1-1200 CNC INTERNAL GRINDER, S/N 2181 Year: 2000, STANDARD, I.D. travel ...more
750 Ton, 259 oz., Engel #ES-1000/750WP, horizontal plastic injection molder, 75.59" daylight, 45" x 45" tie bar spacing, 1997
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: ES-1000/750WP
Year: 1997
, 1997 750 Ton ENGEL ES 1000/750WP Injection Molding Machine, Shot size: 259 Oz, Screw diameter: 140 mm, Tie bar spacing: 45" x 45", Platen Size: 66.73" x 64.30", Max. Open daylight: 75.59", Control: CC100, Hours: 79,929, New pumps. 3 Core pulls, 4 air circuits, shut off nozzle, 8 zone hot runner control. Intrusion. ...more
16" x 5/16" (406.4mm x 8mm) Ome, Structural Tube Mill, 810mm x 8mm strip, 27 Ton coil weight, 810mm ID, 2100mm outside dimension
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
TECHNICAL, CHARACTERISTICS OF INPUT MATERIAL, MaterialPickled and black carbon steel strips S235 - S355, Technological Characteristics, Tensile strengthmax 510 N/mm2, Yield strengthmax 355 N/mm2, Characteristics of Coil Strip, Widthmin 690, max 1300 mm, Thicknessmin 3, max 8 mm Coils, Coil Weight27 tons, Coil I.D.min ...more
750 Ton, 264 oz., Engel #ES-10000/750WP, horizontal plastic injection molders, 45" x 45" tie bar spacing, 1998
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: ES-10000/750WP
Year: 1998
, Still under power, Operational Conditions Good, Imperial Metric Tonnage 750 T 680.389 t Shot Size 264 oz 7,484.3 g Tonnage range 501 – 800 tons, Tonnage 750 Ton, Year model 1998, Make Engel, Model ES 10000/750 WP, Shot Size (Oz) 264 Oz, Screw Diameter 135 mm, Tie Bar Spacing 45” x 45”, Platen Size ...more
JUST ADDED!
6.504" x 0.217" MTM, Tube Mill Line, RL, 311.7 FPM, upgraded controls 2022, tooling, 1995
VX Machinery | Sylvania, OH
Category: Tube Mills
Seller: VX Machinery
Location: Sylvania, OH
Year: 1995
, Manufacturer: MTM, Diameter Range: 31 mm – 165.2 mm (1.220” – 6.504”), Wall Thickness Range Rounds: 1.8 mm – 5.5 mm (0.071” – 0.217”), Wall Thickness Range Squares & Rectangles: 2.8 mm – 5.5 mm (0.110” – 0.217”), Max Mill Speed: 95 MPM ...more
Process Manufacturing Ltd., 42 tank, fully automatic nickel/chrome plating plant, 2012
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Process Manufacturing Ltd.
Year: 2012
42 TANK PROCESS MANUFACTURING LTD. FULLY AUTOMATIC NICKEL/CHROME PLATING, PLANT, NEW 2012, MANUFACTURER - PROCESS MANUFACTURING LTD., YEAR - 2012, TYPE - FULLY AUTOMATED NICKEL & CHROME PLATING PLANT, PROCESSES - NICKEL CHROME, NICHEL GOLD, JIG STRIP, PRODUCT - BRASS / NON FERROUS, NUMBER OF TANKS - 42, OVERHEAD ...more
6" x 6" Mubea #HIW-750, ironworker, 82 ton, 20" throat, 2.75" stroke, 10 HP
Liberty Machine Works | Preston, ID
Category: Ironworkers
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Mubea
Model: HIW-750
82 ton Ironworker, Located at our warehouse in Preston, Idaho, We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and ...more
500 KW Cummins #DFEK, diesel generator set, 277/480 Volts, 369 hours, 750 HP @ 1800 RPM, QSX15-G9 NR2 engine, EPA Tier 2, weatherproof enclosure, 1000 gal. sub-base fuel tank, 2005
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DFEK
Year: 2005
Cummins 500 kW standby (455 kW prime) diesel generator set, model DFEK, SN-I050833691. Cummins QSX15-G9 engine rated 750 HP at 1800 RPM, SN-79122892, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 800 Amp adjustable main-line circuit breaker. PMG permanent magnet generator. UL 2200 ...more
JUST ADDED!
500 KW Onan #500DFFB, Diesel Generator, Cummins #KTTA-19, 3ph, 277/480 Volts, 915 hours, weatherproof enclosure, 1990
Quantum Technology | Shippensburg, PA
Category: Diesel Generators
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Onan
Model: 500DFFB
Year: 1990
1990 500kW Cummins KTTA 19 Diesel Generator, 500kw 3 phase; 311-wdg, 375:kw 1 phase Hours:915 Enclosure: Weather-tight Current Voltage: 277\/480vac 3phase Main Breaker: 800amp 750HP KTTA19-G2 Cummins Diesel Engine Govenor: Electronic PT Base Fuel Tank: OPTIONAL Fuel: Diesel Blockheater: Yes Battery Maintainer:optional ...more
4" x 12.25" x 16" Meco, 4-Hi reversing mill, 46" OD, 270-630 FPM, 1987
D & H Machinery Inc | Toledo, OH
Category: 4 High Rolling Mills
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Meco
Year: 1987
4 HI Meco Reversing Mill, Work Rolls: 4" Dia. x 16" Face, Back Up Rolls: 12.25" Dia. x 16" Face, Coil Weight Capacity: 6,500 lbs., Line Speed: 270 to 630 fpm, Max. Tension: 5,200 lbs. @ 300 fpm, Line Direction: Right to Left, Consisting of the following:, -Entry Coil Car:, Pit Type, 14" Wide "V" Cradle, -Uncoiler: ...more
500 KW Caterpillar #D398B, industrial generator set, 480 Volts
Industrial Motor Power Corp | Encino, CA
Category: Diesel Generators
Seller: Industrial Motor Power Corp
Location: Encino, CA
Mfr: Caterpillar
Model: D398B
Item Number: 4329, Manufacturer: Caterpillar, Fuel Type: Diesel, Model: D398B, Serial Number: 66B06744, HP: 750, KW: 500, Hz: 60, Voltage: 480, RPM: 1200, Hours: 20000 Since New, Price: $35,000.00, More Information: Caterpillar D398B Industrial Generator Set. 500kw, 750hp, 60hz, 480v, 1200rpm. Arrangement # 3N1127. ...more
1200 Amps, ABB / BBC / ITE, 15-VHK-750, 3-pole, electrically operated, drawout, 15000 Volts
BCS Switchgear Inc | Krugerville, TX
Seller: BCS Switchgear Inc
Location: Krugerville, TX
Mfr: Abb
Model: 15-VHK-750
1200 Amps, ABB, 26GHK-750, electrically operated, drawout, #VB6178
RESA Power Solutions | Cerritos, CA
Category: Indoor Type Vacuum Circuit Breakers
Seller: RESA Power Solutions
Location: Cerritos, CA
Mfr: Abb
Model: 26GHK-750
ABB Circuit Breaker, Vacuum Breakers type, Catalog Number 26-GHK-750, 1200 amp frame current, 27000 volts, Electric operation, Drawout mounting.
Nederman #S-750, interior filter bag dust collector, 7.5 HP, 243 sq.ft. filter media, 3 waste discharge points, 11" inlet opening, 2026, new
Ex-Factory | Charlotte, NC
Category: Bag Filters
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nederman
Model: S-750
Year: 2026
NEDERMAN S-750 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- : 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags ...more
Fastems #FPC-750m, flexible pallet container, 29.53" x 29.53", 2014 (2 available)
Silverlight CNC | Barrington, IL
Category: CNC Auto Loaders
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Fastems
Model: FPC-750M
Year: 2014
2014 Fastems FPC-750 Flexible Machining System for sale. s 750 mm X and Z dimensions. Ideal for enhancing your machining operations with precision. Contact us for further on this well-maintained used equipment., 2014 FASTEMS FPC-750, X. 750 mm, Z. 750 mm, 2 Available.
750/800 HP Galt Electric, G5000 Series, (560 kW), 99 A, IP30 - 165.3 x 47.2 x 107"
VFDS.com | Salt Lake City, UT
Category: AC Variable Frequency Drives
Seller: VFDS.com
Location: Salt Lake City, UT
Mfr: Galt Electric
Model: G5000 SERIES
1200 Amps, ITE, 15hk- 750, with switchgear, 15 KV
North American Switchgear Inc | Cleveland, OH
Category: High Voltage Air Circuit Breakers
Seller: North American Switchgear Inc
Location: Cleveland, OH
Mfr: Ite
Model: 15HK-750
2000 Amps, ITE, 15hk- 750, 125 VDC
MGB Transformers | Saint-Pie, QC
Category: High Voltage Air Circuit Breakers
Seller: MGB Transformers
Location: Saint-Pie, QC
Mfr: Ite
Model: 15HK-750
1200 Amps, ITE, 15hk- 750, electrically operated, drawout, 125 VDC (5 available)
MGB Transformers | Saint-Pie, QC
Category: High Voltage Air Circuit Breakers
Seller: MGB Transformers
Location: Saint-Pie, QC
Mfr: Ite
Model: 15HK-750
Novatech #MPC-750, Desiccant Dryer, No Hopper, 2500 lb., 750 cu.ft. capacity, 460 V
Perry Videx LLC | Hainesport, NJ
Category: Desiccant Air Dryers
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Novatec
Model: MPC 750
Used Novatech model MPC 750 desiccant dryer rated at 750 cubic feet. Has MCD 1002 microprocessor control. Serial number 3-9293-1267. 460/3/60. 110.9 amps. 88.4 amps. No hopper., NOVATEC MPC 750.
Savage Bros #750-CM, Chocolate Melter & Conditioner, Stainless Steel
Revelation Machinery | Chicago, IL
Category: Chocolate Candy Melter
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Savage
Model: 750-CM
Year: 2010
Make: Savage Bros, Model: 750 CM, Year: 2010, Machine Location: Illinois, 750 Lb / 350 Kg Chocolate Melter & Conditioner, All stainless steel water-jacketed construction, UNIQUE water-jacketed draw-off guillotine valve for never plug performance, Internal pump circulates water for fast melting and conditioning ...more
Wacker Corporation PST3 WAC, S/N: 24574550, 2022
Boyd Cat Company | Parkersburg, WV
Category: Centrifugal Pumps
Seller: Boyd Cat Company
Location: Bowling Green, KY
Mfr: Wacker
Model: PST3 WAC
Year: 2022
PST3 750-PUMP SUB. 110V/60HZ, PST3 WAC.
4500 cfm Nederman #S-750, Baghouse Dust Collector w/Auto Bag Shaker, 6" WG, 243 sq.ft. Filter Media, 11" Inlet Opening, (24) Filter Bags, 7.5 HP, 1750 RPM, 2026
Ex-Factory | Charlotte, NC
Category: Dust Collectors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nederman
Model: S-750
Year: 2026
NEDERMAN S-750 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- : 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane ...more
JUST ADDED!
4500 cfm Disa #S-750, baghouse dust collector, 243 sq.ft., 8" W.G., 7.5 HP, 1750 RPM
Ex-Factory | Charlotte, NC
Category: Dust Collectors
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Disa
Model: S-750
DISA S-750 Bag House Dust Collection SystemIncludes -- 7-1/2 HP - 1,750 RPM TEFC Motor; (24) cloth material filter bags; (3) plastic waste collection bags; (3) clamps for easy removal of waste bags. -- s -- 243 Sq./ft. of filter media; easy installation, typically (1) hour; quiet operation; (3) waste discharge points; ...more
9" x 11" Hemsaw #750A, horizontal metal bandsaw, 10" round, 2 HP, S/N 221285VB
Smith Machinery Co | Ames, IA
Category: Horizontal Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hemsaw
Model: 750A
Capacity (Rectangular) 9" x 11" Capacity (Round) 10 inches Capacity (Flat) 12 inches Blade Size 3/4" X 11'.035 THK Air 110 PSI ELECTRICAL 220/440V Amps 7/3.5 HP 2 HP.
