29 Results
Featured
26" width x 55" D x 21" H, AVS Tungsten Recycling Furnace, 2 heaters
AVS Inc | AYER, MA
Category: Vacuum Furnaces
Seller: AVS Inc
Location: Ayer, MA
Mfr: Avs
Refurbished AVS zinc reclaim furnace systems for reclaiming tungsten carbide via the zinc reclaim process. This ZNR-1200 has capacity to process up to 1200 pounds of tungsten carbide. AVS furnace systems are managed by a recipe driven, hands-off control system, maximizing operational safety and minimizing human ...more
JUST ADDED!
14" width x 16" D x 14" H, SCP, vacuum hot press, 50 Ton, 2000°C, 5" diameter graphite rams, 120 KW, 480 V., 3 Ph., 2016
Revelation Machinery | Chicago, IL
Category: Vacuum Furnaces
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Scp
Year: 2016
Make: SCP Limited, Model: 50 Ton, Year: 2016, Machine Location: Upon Request, Maximum Temperature:, 2000°C, Power: 480VAC 3‑Phase / 264 FLA, Hot Zone:, 14″ wide x 16″ deep x 14″ tall, Ram window: 9.75″–15.75″ (top ram down–up), 2″ graphite insulation board ...more
JUST ADDED!
19" width x 21" D x 14" H, SCP, vacuum hot press, 50 Ton, 2000°C, 5" diameter graphite rams, 120 KW, 480 V., 3 Ph., 2016
Revelation Machinery | Chicago, IL
Category: Vacuum Furnaces
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Scp
Year: 2016
Make: SCP, Model: 50 Ton, Year: 2016, Machine Location: Upon Request, Maximum Temperature/Power:, • 2000°C, • Power: 480VAC 3-Phase / 264FLA, Hot Zone:, • 19” Wide x 21” Deep x 14” Tall, • Ram Window: 10.4”-16.0” (Top Ram Down – Up), • 2” Graphite ...more
JUST ADDED!
19" width x 21" D x 14" H, SCP, vacuum hot press, 50 Ton, 2000°C, 5" diameter graphite rams, 120 KW, 480 V., 3 Ph., 2018
Revelation Machinery | Chicago, IL
Category: Vacuum Furnaces
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Scp
Year: 2018
Make: SCP Limited, Model: 50 Ton, Year: 2018, Machine Location: Upon Request, Maximum Temperature:, • 2000°C, • Power: 480VAC 3-Phase / 267FLA, Hot Zone:, • 19” Wide x 21” Deep x 14” Tall, • Ram Window: 10.4”-16.0” (Down – Up), • 2” Graphite ...more
JUST ADDED!
20" diameter x 24" D Abar Ipsen, Vacuum Furnace, 1000°C, 4 cu. ft. hot zone, quench system, Stokes 412H-11 pump, Varian 4,400 width diffusion pump, controls
Aucto | San Francisco, CA
Category: Vacuum Furnaces
Seller: Aucto
Location: Boyers, PA
Mfr: Abar Ipsen
1000°C VACUUM FURNACE WITH CONTROLS, QUENCH SYSTEM, PUMP PKG, 4 CU FT ZONE, STOKES 412H-11 MECHANICAL PUMP, 1722 STOKES BLOWER, VARIAN 4,400 WATT DIFFUSION PUMP, 20" DIAMETER X 24" DEEP HOT ZONE, CONTROLS, TRANSFORMER, QUENCH SYSTEM, INTEGRATED DIGITAL CONTROLS, PUMP PACKAGE, AND COOLING/QUENCH SETUP ...more
JUST ADDED!
20" width x 24" D, Abar Ipsin, 1000°C 1832 °F) Vacuum Furnace with Controls, Quench System & transformer, 4 cu.ft.
Steam Well Llc | Verona, PA
Category: Vacuum Furnaces
Seller: Steam Well Llc
Location: Verona, PA
Mfr: Abar Ipsin
ABAR IPSEN Model: 412-H Status: For Sale Country: United States 1000°C /1832 F Vacuum Furnace with Controls, Quench System, Pump Pkg, 4 Cu Ft Zone, Stokes 412H-11 Mechanical Pump, 1722 Stokes Blower, Varian 4,400 Watt Diffusion Pump, 20" diameter X 24" deep Hot zone, Controls, Transformer, Quench system ...more
Get email updates for newly added Vacuum Furnaces
Vacuum Furnaces (also known as vacuum heat treatment furnaces) are specialized systems that heat materials in a low-pressure environment to prevent oxidation and contamination. Commonly used in industries like aerospace, automotive, and metallurgy, these furnaces are ideal for processes such as brazing, annealing, and sintering. Vacuum furnaces ensure precise temperature control, uniform heating, and high-quality results for components requiring superior material properties and surface finishes.
20" width x 60" D x 18" height, Advanced Vacuum Systems #SH12, Sinterhip, graphite, 625 kG, GE90/30 PLC, 1600°C vacuum, 1300 CFM vacuum booster, 900 PSI, 480 V.
Solomon Machinery | Eastpointe, MI
Category: Vacuum Furnaces
Seller: Solomon Machinery
Location: Eastpointe, MI
Mfr: Advanced Vacuum Systems
Manufacturer: Advanced Vacuum Systems, Type: Sinterhip, Model: SH 12, Load Area: 20 wide x 18 high x 60 Deep, Heating Elements: Graphite, Heat Shields: Graphite, Debind: Drop-out pot / Condenser, Load Size: 625 kG, Controls:, PLC: GE 90/30, HMI: WonderWare, Maximum Temp: 1600C (vacuum) 1450 C (pressure), Roughing ...more
JUST ADDED!
Centorr #3530, Workhorse Vacuum Furnace, 2530°C max., 24" x 24" x 48" effective hot zone, graphite elements, 800 KVA, 480 V., Honeywell DCP-552
Revelation Machinery | Chicago, IL
Category: Vacuum Furnaces
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Centorr
Year: 1900
Make: Centorr, Model: 3530, Year: 1900, Machine Location: Upon Request, Model: 3530, Max Temp: 2530C, Insulation Material: Graphite Board (4” total thickness), Element Material: Graphite, Element Arrangement: 2 sided heating, 3 elements per side 6 total, Zone Interior Dimensions: 28.5” x 25” x ...more
24" width x 36" D x 18" H Abar Ispen #VTFC-414R, Horizontal Vacuum 1400°F, 480 V., 10 HP
Heat Treat Equipment Co | Canton, MI
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Abar
24" width x 36" D x 18" H, C.i.hayes, 2400°F, vacuum furnace w/oil quench, electric
W H Kay Co, The | Cleveland, OH
Category: Vacuum Furnaces
Seller: W H Kay Co, The
Location: Cleveland, OH
Mfr: C.i.hayes
24" width x 36" D x 24" H, Abar-Ipsen Vacuum Temper Furnace, Elec 1500°F
W H Kay Co, The | Cleveland, OH
Category: Vacuum Furnaces
Seller: W H Kay Co, The
Location: Cleveland, OH
Mfr: Abar-Ipsen
Abar Ipsen Vacuum Tempering Furnace 1500° F 45 KW 460/3/60, I.D.: 24" W x 36" D x 24" H, Horizontal Loading Vacuum Furnace complete with Moly Lining, Top Mounted Alloy Recirculating Fan, Stokes 212-11 Mechanical Pump, Stokes 310-401 Booster Pump, External Cooling Blower (25 H.P.), and Single Swing Out Front Door. ...more
24" width x 36" L x 24" H, C.i.hayes, 1450°F electric vacuum furnace
Furnace Brokers International | Tolland, CT
Category: Vacuum Furnaces
Seller: Furnace Brokers International
Location: BOSTON, MA
Mfr: C.i.hayes
CI HAYES 1450 F VACUUM FURNACE WITH DOUBLE WALL WATER COOLED HORIZONTAL LOAD CHAMBER WITH COIL TYPE HEATING ELEMENTS AND SLIDING FRONT DOOR. MISSING STOKES 212 (150 CFM) MECHANICAL PUMP.
26" width x 55" D x 21" H, AVS Tungsten Recycling Furnace, 2 heaters
AVS Inc | AYER, MA
Category: Vacuum Furnaces
Seller: AVS Inc
Location: Ayer, MA
Mfr: Avs
Refurbished AVS zinc reclaim furnace systems for reclaiming tungsten carbide via the zinc reclaim process. This ZNR-1200 has capacity to process up to 1200 pounds of tungsten carbide. AVS furnace systems are managed by a recipe driven, hands-off control system, maximizing operational safety and minimizing human ...more
30" width x 52" D x 30" H CI Hayes, front load vacuum furnace, 1450°F, Honeywell DCP216 temperature control
Heat Treat Equipment Co | Canton, MI
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Manufacturer: CI Hayes, Type: Front Load Vacuum Furnace, Model: VMHT, Serial Number: 15534, Load Area: 30” wide x 52” deep x 30” high!, Maximum Temp: 1450°F, Electrical: 480V / 3-phase / 60 Hz; 60 KW max. continuous input, Cooling Fan: 75 / 19 HP, 2-speed, Pump:Stokes 212-11-10, Transformer: ...more
34" diameter Ocean States Technical Services, Stainless Steel, 150 psi @ 350, 1006
FL Sales Inc | Solon, OH
Category: Vacuum Furnaces
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Ocean States
1996 OCEAN STATES TECHNHICAL SERVICES STAINLESS STEEL VACUUM CHAMBER 34" DIAMETER NATIONAL BOARD RATED, 150 PSI AT 350, NB-3.
36" width x 48" L x 24" H Surface Combustion, 1350°F
Furnace Brokers International | Tolland, CT
Category: Vacuum Furnaces
Seller: Furnace Brokers International
Location: Tolland, CT
Mfr: Surface Combustion
Year: 1979
HORIZONTAL DOUBLE WALL WATER COOLED CHAMBER WITH SINGLE SIDE SWING BOLT DOWN FRONT DOOR. VACUUM PUMPS EVACUATE THE VESSEL WHICH IS THEN BACK FILLED WITH NITROGEN. HEAT IS SUPPLIED BY COIL TYPE HEATING ELEMENTS BEHIND A PROTECTIVE SCHROUD. HEATED AIR IS CIRCULATED BY A ROOF MOUNTED FAN.
36" width x 48" D x 32" H Seco Warwick, vacuum carburizing furnace w/quench, gas fired, 2300°F
Heat Treat Equipment Co | Canton, MI
Category: Vacuum Furnaces
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Seco Warwick
Manufacture: Seco Warwick (installed 2012), Type: Vacuum Oil Quench Furnace, Workable Dim’s: 36” wide x 48” long x 32” high, Max Load: 2600 pounds, Power: 240 KW, Maximum Temp: 2300°F, Temp Uniformity: ±10°F, Vacuum: 10-2 Tor, Heating Zones: One (1), Thermocouples: Type ...more
48" width x 48" D x 24" H, Surface Combustion, 2 bar, electric, 2400°F., front load
W H Kay Co, The | Cleveland, OH
Category: Vacuum Furnaces
Seller: W H Kay Co, The
Location: Cleveland, OH
Mfr: Surface Combustion
48" width x 48" H, Seco bottom load vacuum furnace, 2200°F
Furnace Brokers International | Tolland, CT
Category: Vacuum Furnaces
Seller: Furnace Brokers International
Location: SPRINGFIELD, MA
Mfr: Seco
Year: 1991
ID: 48" DIA X 48" HIGH, 2200 F, 440 VOLTS 250 KW 3 PHASE DIGITAL CONTROLS, BOTTOM LOAD VERTICAL VACUUM FURNACE WITH METALLIC HOT ZONE AND HEATING ELEMENTS HAVING A CAPACITY OF 1000 LBS @ 1000 C. HEATING ELEMENTS ARE MOUNTED IN THE FLOOR BELOW HEARTH, ON ROOF & SIDE WALL. POWER TO HEATING ELEMENTS IS THROUGH LOW ...more
JUST ADDED!
Consarc, ESR/VAR vacuum remelt ingot furnace, 450 lb. capacity, 8" max ingot diameter, 29" max ingot length, 6,000 amp VAR, 5,000 amp ESR, 480 V., 2010
Revelation Machinery | Chicago, IL
Category: Vacuum Furnaces
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Consarc
Year: 2010
Make: Consarc, Model: 450 lb, Year: 2010, Machine Location: Upon Request, Minimum Ingot Diameter: 2.75″, Maximum Ingot Diameter: 8″, Maximum Ingot Length: 29″, Maximum Ingot Weight: 450 Lbs., Ingot Density: 0.22 Lbs./Cu. In., Maximum Crucible Depth: 29.5″, Minimum Stub Length: 3″, Maximum ...more
ECM Technologies #3100-500, vacuum carburization furnace, 250°C, Seimens PLC, 2013
G-2000 | Toledo, OH
Category: Vacuum Furnaces
Seller: G-2000
Location: Toledo, OH
Mfr: Ecm
Year: 2013
THIS IS A LATE MODEL ECM TECHNOLOGIES VACUUM CARBURIZING FURNACE BUILT NEW IN 2013 PART OF A COMPLETE HEAT TREAT AND CARBURIZING LINE. CONSISTING OF 3 EWN -34-75E WISCONSIN OVEN CORP ELECTRIC BATCH FURNACES WITH A MAX. TEMP OF 250 DEGREES C. AND INCLUDING THE ECM CARB FURNACE. SEIMENS PLC CONTROLS. SEE PICS FOR ...more
ECM Technologies, Vacuum Carburizing Furnace, Siemens PLC Controls, 2013
Aucto | San Francisco, CA
Category: Vacuum Furnaces
Seller: Aucto
Location: Imlay City, MI
Mfr: Ecm Technologies
Year: 2013
The 2013 ECM Technologies vacuum carburizing furnace is a late-model industrial heat treatment unit designed for carburizing applications. This system was originally part of a complete heat treat and carburizing line that integrated the ECM furnace with three Wisconsin Oven Corp EWN-34-75E electric batch furnaces. The ...more
ECM Technologies vacuum carburization furnace, 250 C, late model, low hours, 2013
R.A.B. Industries Inc | Washington, MI
Category: Vacuum Furnaces
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Ecm Technologies
Year: 2013
This used Ecm Technoligies (2013) is a furnace available from R.A.B. Industries. It is the nan controller.1-USED ECM TECHNOLOGIES VACUM CARBURIZING FURNACESERIAL NUMBER 3100-500DATE OF MFG. 2013STK#104132===========================NEW COST WAS SEVERAL MILLION SUPER WHILE OBTAINED FROM SOURCES DEEMED RELIABLE ARE ...more
ETC #Elatec-Elevec-VII, Vacuum Furnace
R.A.B. Industries Inc | Washington, MI
Category: Vacuum Furnaces
Seller: R.A.B. Industries Inc
Location: Imlay City, MI
Mfr: Etc
This used Etc (nan) is a furnace available from R.A.B. Industries. It is the nan controller.1-BARELY USED ETC ELATEC ELEVEC VII VACUUM FURNACE.
ETC Elatec #System-VII, Multipurpose Vacuum Furnace, 1000°C-2200°C, Stainless Steel Chamber
Aucto | San Francisco, CA
Category: Vacuum Furnaces
Seller: Aucto
Location: Imlay City, MI
Mfr: Etc Elatec
The Etc Elatec Elevec VII is a multipurpose vacuum furnace designed for vacuum and inert atmosphere metallurgical processes. This cold wall vacuum furnace s a stainless steel chamber with water-cooled jackets and baffled cooling. The system is designed for versatility, accommodating interchangeable accessories to ...more
JUST ADDED!
Ipsen #VFC-424-R, horizontal vacuum heat treating & brazing furnace
ESS Industrial | Woodruff, SC
Category: Vacuum Furnaces
Seller: ESS Industrial
Location: Woodruff, SC
Mfr: Ipsen
ISPEN VFC-424-R Brazing & Sintering Furnace, used condition. Reliable equipment for precision applications in industrial manufacturing. Ideal for professionals seeking dependable performance in brazing and sintering processes., ISPEN VFC-424-R.
Kayex/Hamco #KX-150" crystal growing system/vacuum furnace
TNT Industrial | Orange, CA
Category: Vacuum Furnaces
Seller: TNT Industrial
Location: Orange, CA
Mfr: Kayex/hamco
KAYEX / HAMCO MODEL KX-150 CRYSTAL GROWTH SYSTEM FURNACE..
Seco Warwick, horizontal vacuum furnace with retractable loader
Perfection Global | Elk Grove Village, IL
Category: Vacuum Furnaces
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Seco Warwick
Electrical 480V / 3 / 60Hz, Retractable Loader Cooling System.
JUST ADDED!
Thermal Technology Horizontal Vacuum Annealing Furnace High Temperature
C & D Professional Services | Lacey, WA
Category: Vacuum Furnaces
Seller: C & D Professional Services
Location: San Jose, CA
Mfr: Thermal Technology
Furnace, High Temperature, Thermal Technology Model 12-12-12W, Serial number F0907014, 1600º C, 2912º F (can be configured to 2200º C, 3992º F), horizontal vacuum annealing furnace with cylindrical chamber, hinged/clamped chamber door, internal retort/rack, gas and vacuum service manifolds, and ...more
Lindberg #22-GR-3830-17TF, top loading vacuum furnace, 1700°F, Stokes 607-1/212 vacuum pump/blower, control panel
TNT Industrial | Orange, CA
Category: Vacuum Furnaces
Seller: TNT Industrial
Location: Orange, CA
Lindberg mdl 22-GR-3830-17TF 1700 Degree F 1700 Degree F Each vacuum furnace has a control panel transformer stokes vacuum pump / blower combo (Model 607-1 / 212) The most of these were purchased in the mid to late 1990’s..
