Buy or Sell Your Tos W100A
AI-ranked results for tos w100a - closest matches first
Nita Smart Labeling Systems #XP100, Stainless Steel, wrap around pressure sensitive labeler rated from 100" to 1570" on wrap labels per minute
Frain Industries | Carol Stream, IL
Category: Labeling Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Nita
Model: XP100
Nita, Model XP100, stainless steel, wrap around pressure sensitive labeler rated from 100" to 1570" on wrap labels per minute with number of containers – depending on materials and application. Label size range: 1" to 9" in Height. 116" long x 4" wide plastic Delrin product in feed ...more
100 gallon Legion #LGB-100F, Stainless Steel Self-Contained Jacketed Steam Kettle, 47.8" L x 55.6" width x 93.5" H, 154800 btu/hr, 150°F-260°F temp. range, 208/240 V., 1-Ph.
Revelation Machinery | Chicago, IL
Category: Kettles (Food Based)
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Legion
Model: LGB-100F
Year: 1900
Make: Legion, Model: LGB-100F, Year: 1900, Machine Location: Vermont, Equipment Overview, This unit is a Legion LGB‑100F 100-gallon, low-rim, self-contained gas-fired steam kettle with a fully jacketed 304 stainless liner, insulating jacket, actuator-assisted domed cover, and a 2″ stainless draw-off valve. ...more
Norden #AM1000, automatic, Stainless Steel, metal tube filler & sealer, 20-100 tubes/minute, bottom up fill, saddle fold seal
Frain Industries | Carol Stream, IL
Category: Tube Filler Machine
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Norden
Model: AM1000
Norden Model AM1000, automatic, stainless steel, metal tube filler and sealer rated from 20 to 100 tubes per minute – depending on materials, application and machine configuration. Tube size range:10mm to 50mm in Diameter; 50mm to 250mm in Length with proper change parts. empty tube magazine, stainless steel ...more
100 HP Ingersoll-Rand #SSR-EP100, screw type, air cooled, s/n Ck3512u00195, 64812 hours, 2000
FL Sales Inc | Solon, OH
Category: Rotary/Sliding Vane Air Compressors
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Ingersoll-Rand
Model: SSR-EP100
Year: 2000
2000 Ingersoll rand model SSR-EP100 100 hp Screw type air compressor s/n CK3512U00195, 64,812 hours air cooled.
Fanuc, R-1000iA/100F, 6-Axis robot, R-30iB Control, 100 Kg, 2230mm reach, 2014
R.A.B. Industries Inc | Washington, MI
Category: Industrial Robots
Seller: R.A.B. Industries Inc
Location: Washington, MI
Mfr: Fanuc
Model: R-1000IA/100F
Year: 2014
1-FANUC R-1000iA/100F 6 AXIS ROBOT WITH R-30iB CONTROL.
Kadant FH-SS-100-15 Johnson Flex Metal Hose FFLF-01 STOCK 1901
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Kadant
Model: FH-SS-100-15
Kadant FH-SS-100-15 Johnson Flex Metal Hose FFLF-01 STOCK 190130 DAY RIGHT TO RETURN (FREE RETURNS DOMESTICALLY) AUTHENTICITY GUARANTEED! WE SOURCE OUR PRODUCTS FROM CLOSED LOCATIONS AND OTHER TRUSTED SOURCES.
Kadant FH-SS-100-15 Johnson Flex Metal Hose FFLF-01 STOCK 1902
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Kadant
Model: FH-SS-100-15
39" Chen San Fung #SD-100, Denibbing Sander, (1) head w/ (6) 0.5 HP counter rotating arbors, (20) blades/spindle, 20 RPM, 2005
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Chen San Fung
Model: SD-100
Year: 2005
CHEN SAN FUNG SD-100 Denibbing Sander --39" Width cap.; (1) head with (6) 0.5 HP counter rotating arbors mounted on a central rotating drive assembly with (20) blades per spindle, variable assembly rotation from 2 - 20 RPM. -- Each arbor/spindle is abrasive fladder disc type brush media, variable arbor speed from 300 ...more
JUST ADDED!
Morbidelli #N-100, flat table machine, 5' x12'tbl., 145.12" X, 61.22" Y, 9.8" Z, 14 ATC, 24k RPM, HSK F63, 2019
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Morbidelli
Model: N-100
Year: 2019
MORBIDELLI - N 100 15 C: Flat Table Machine with ATC, Boring, Rake -- 5' x 12' x 37": H - High efficiency laminate aluminum with: Vacuum locking system.Grid pattern allows: Use of vacuum pods or closed cell rope gasket material; use of spoil boards for nested base machining. Part location pop-up pins mounted ...more
Morbidelli #N-100, flat table machine, 5' x12'tbl., 166.54" X, 78.15" Y, 9.84" Z, 24k RPM, 14 ATC, boring, 2017
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Morbidelli
Model: N-100
Year: 2017
MORBIDELLI - N 100 15: Flat Table Machine with ATC, Boring, Rake -- : 5' x 12' Worktable 13 HP (S6) air cooled electro spindle with HSK F 63 quick release tool holder 1,500 to 24,000 RPM inverter-controlled spindle speed Aluminum solid worktable that can nest full sheets or be used for routing smaller ...more
IWKA #TU-100, Plastic & Metal Tube Filler
Aaron Equipment Co | Schaumburg, IL
Category: Filling Equipment (Fillers)
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Iwka
Model: TU-100
used- iwka model tu-100 plastic and metal tube filler. comes with spare change parts and has parts for running both plastic and metal tubes. metal tube parts designed for saddle fold.
1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp controller, 2010
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: AK100
Year: 2010
Used 1.0” American Kuhne Extruder, 24:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones Barrel Clamp Is Not Complete – Top Half Missing DOES NOT INCLUDE SCREW 3 HP Marathon Blackmax Motor With ...more
1" American Kuhne, extruder, 24:1 L/D ratio, 42" centerline, rectangular feed throat, Eurotherm 3208 temp controller, 2011
Arlington Machinery | Lake Zurich, IL
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: American
Model: AK100
Year: 2011
Used 1.0” American Kuhne Extruder, 24:1 L/D Ratio 17.88:1 Koellmann UNEX 1.0 Gearbox, Rated To 10 HP 42” Centerline Rectangular Feed Throat Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones Barrel Clamp Includes Screw 3 HP Marathon Blackmax Motor With Allen-Bradley Powerflex 700 AC Inverter Drive 30 AMP Main ...more
4000 Amps, General Electric, ak-100
Circuit Breaker Sales | Gainesville, TX
Category: Low Voltage Air Circuit Breakers
Seller: Circuit Breaker Sales
Location: Gainesville, TX
Mfr: General Electric
Model: AK-100
100 gallon Groen #EE-100, Electric Steam Kettle w/ Agitator, 1987
Wholesale Equipment Resources LLC | Elmira, NY
Category: Kettles (Food Based)
Seller: Wholesale Equipment Resources LLC
Location: Elmira, NY
Model: EE-100
Year: 1987
AMERICA'S STEAM KETTLE HEADQUARTERS PRESENTS:, WORLD FAMOUS GROEN #EE-100, 208V-3PH ELECTRIC SELF CONTAINED STEAM KETTLE w/ CENTRAL MOUNTED MIXING AGITATION., STOCK #1102-C., 30PSI @300 DEGREES F., OFFERED: AS IS, WHERE IS, NO EXPRESSED -or- IMPLIED WARRANTIES., FOB: ORIGIN, WE WILL LOAD ON YOUR PRIVATE VEHICLE @ ...more
Marathon Letourneau #ST-100 Letro-port 50 ton capacity, spreader, 50' W x 29' Deep, 1983
Peterson Machinery Sales | Casa Grande, AZ
Category: Material Handling Equipment
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Marathon
Model: ST-100
Year: 1983
Without Spreader Bar..
100 Ton, Wysong #PH100-96, hydraulic press brake, 8' overall, 78" between housing, 8" stroke, 10 HP, #69979
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wysong
Model: PH100-96
SERIAL. HPB45-101, MODEL. PH100-96, CAPACITY. 100 TON, OVERALL LENGTH OF BED & RAM. 96", DISTANCE BETWEEN HOUSING. 6'6", STROKE. 8", OPEN HEIGHT. 17", CLOSED HEIGHT. 9", ADJUSTMENT. 3", DEPTH OF THROAT. 7", CNC BACK GAUGE. YES, ELECTRIC FOOT PEDEL. YES, MOTOR. 10 HORSEPOWER.
Plasma Etch #PE-100, cabinet, 12" x 12" chamber, (3) 9" x 11" shelves, 15 amps, 120 V.
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Plasma Etch
Model: PE-100
one(1) used Plasma Etch Cabinet Model: PE-100 Serial number 12011-1 ID - 875 Single phase, 120 voltage 15 amps Chamber size: 12" x 12" 3 shelves - 9" x 11" with power supply 13.56 MHZ unit.
10000 cfm, 125 psig, Cooper / Joy #TA-100, 2000 HP, remanufactured, warranty
JPL Compressor Service | Westminster, CA
Category: Centrifugal Air Compressors
Seller: JPL Compressor Service
Location: Westminster, CA
Mfr: Cooper
Model: TA-100
100 Ton, Standard #AB100-10, press brake, 10' overall, 101" between housing, 6" throat, 6" stroke, 13" open, 7" Shut Height, 1 HP, 230 V., 3 phase, w/ die rail, arms, manula Back Gauge
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Standard
Model: AB100-10
Tonnage 100 tons BH (Distance Between Housings) 8' 5" Bed/Ram Length 10 feet Weight 19000 pounds Height Above Floor 106 inches Bed Width 4 inches Throat Depth 6 inches Ram Stroke (Fully Adjustable) 6 inches Open Height 13 inches Closed Height 7 inches Horsepower 1 Ram Speeds (In Inches per Minute) Approach: 116 ...more
SIEMENS SIMOVERT ADAPTER 6SX7010-0AA00 NIB #K-909
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Siemens
Model: 6SX70100AA00
SIEMENS SIMOVERT ADAPTER 6SX7010-0AA00 NIB #K-909. Thank you for Shopping with ElectricalPS!30 DAY RIGHT TO RETURN (FREE RETURNS DOMESTICALLY) AUTHENTICITY GUARANTEED! WE SOURCE OUR PRODUCTS FROM CLOSED LOCATIONS AND OTHER TRUSTED SOURCES.
100 Ton, Key Plant #CR100, tank turning roll set (1 drive & 1 idler per set)
Kevins Equipment Co. KEC | Houston, TX
Category: Power Tank Turning Rolls
Seller: Kevins Equipment Co. KEC
Location: Houston, TX
Mfr: Key Plant
Model: CR100
Model KP100 Conventional Rotator Set (Drive & Idler), Safe Working Load Drive Unit 50 tonne, Safe Working Load Idler Unit 50 tonne, Maximum Load Carrying Capacity Set 100 tonne (1 Driver & 1 Idler), Rotation Capacity, Drive Unit 150 tonne, Wheel Centre Distance 27.5, 43.3, 59, 74.8, 90.6, 106.3, 122in (700 ...more
Columbia #FL-100, Case Palletizer, Low level, 12 CPM, Allen Bradley PLC
Aaron Equipment Co | Schaumburg, IL
Category: Palletizers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Columbia
Model: FL-100
used- columbia case palletizer model fl100 low level. full case palletizer is rated to 12 cases per minute, depending on materials and application. case size range: up to 22" length; 16" width; 18" height. load capacity: up to 48" length; 48" width; and 65" height with skid. the weight capacity is up to 600 lbs per ...more
Columbia #FL100, low level, full case palletizer, 5-12 cases per minute, with 12 capacity empty pallet magazine that accommodates pallets from 40" x 40" to 48" x 48"
Frain Industries | Carol Stream, IL
Category: Palletizers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Columbia
Model: FL100
Columbia Model FL100, Low level, full case palletizer rated from 5 to 12 cases per minute and number of pallets per hour – depending on materials and application. Case size range: up to 22″ in Length; 16″ in Width; 18″ in Height. Pallet load capacity: up to 48″ in Length; 48″ in ...more
Thermatool #TMI-100, Tube mill welder, 1994
AM Industrial | Brook Park, OH
Category: Tube Mills
Seller: AM Industrial
Location: Warren, OH
Mfr: Thermatool
Model: TMI-100
Year: 1994
Thermatool Tube mill welder AM22565, Model: TMI- 100 Serial: 1578, CP No: 100KW, Volt Sec- 13,000, Volts PR. 460, Date- 10/31/1994.
100 Paul O Abbe #RB-100, Double Ribbon Blender,, 44.9" width x 93.8" L x 49.3" D trough, 304 Stainless Steel, food grade, 30 HP, 230/460 V., New
Aaron Equipment Co | Schaumburg, IL
Category: Ribbon Mixers and Blenders for Food
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Paul O Abbe
Model: RB-100
new & in stock- paul o. abbe model rb-100 ribbon blender. in -stock.100 cubic foot working capacity. 108 cubic foot total volume. type 304 stainless steel polished. food grade. all stainless steel construction. trough dimensions: approximately 44.9" wide x 93.8" long x 49.3" deep. internal double spiral ribbon. ...more
100 HP Ingersoll-Rand #SSR-EP100, air compressor, 446 cfm, 125 psig
D & D Industries Inc | Monclova, OH
Category: Rotary/Sliding Vane Air Compressors
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Ingersoll-Rand
Model: SSR-EP100
100 HP, 446 CFM, 125 PSIG, TOTAL HOURS 19209, 5 HP FAN MOTOR, TOTAL PACKAGE AMPS 280/140, 100 HP / 230 / 460 / 3, 107" X 50" X 55"T APROX., 5000 LBS APROX..
100 GPM @ 57' TDH, Wilson Snyder #S-100, 2x3x8.5,1 stage, 1750 RPM, Carbon Steel, API, #3153
PumpWorks | Houston, TX
Category: Centrifugal Pumps
Seller: PumpWorks
Location: Houston, TX
Mfr: Wilson Snyder
Model: S100
36"-100" LaPointe & Colonial #BS100, Broach Sharpener, round, flat & combination
Broaching Machine Specialties | Novi, MI
Category: Broach Sharpeners
Seller: Broaching Machine Specialties
Location: Novi, MI
Mfr: Lapointe & Colon
Model: BS100
100 KVA Heron #ZDN-100, projection welder, 12" throat, 6" cylinder diameter, 440/460/480 V.
T J Snow Co Inc | Chattanooga, TN
Category: Press Type Welders - Projection
Seller: T J Snow Co Inc
Location: Chattanooga, TN
Mfr: Heron
Model: ZDN-100
Machine, Stock Number: 6906, Name: Heron Projection Welder, 100 KVA, Transformer: 100 KVA, Manufacturer: Heron, Mfg. Model Number ZDN-100, Voltage: 440/460/480 Volts, Single Phase, Throat Depth: 12" in, Secondary Volts: 8.8-10, Serial Number: M09041700100401-01-02, Air Type: Standard Dual Acting, Cylinder ...more
446 cfm, 125 psig, Ingersoll-Rand #EP100, 100 HP, 460 V.
Airex Systems Ltd | Delta, BC
Seller: Airex Systems Ltd
Location: Delta, BC
Mfr: Ingersoll-Rand
Model: EP100
17 Ton, Pandjiris #PR100, tank turning rolls, 34000 lb., 13 HP, pendant Control, #73313
Yoder Machinery Sales | Holland, OH
Category: Power Tank Turning Rolls
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pandjiris
Model: PR-100
MODEL. PR100, CAPACITY TURNING. 50 TON, CAPACITY 1 DRIVE & 1 IDLER. 17 TONS SUPPORT, WIDTH OF RUBBER WHEEL. 14", DIAMETER RANGE. 12" MIN. TO 96" MAXIMUM, TURING SPEEDS (VARIABLE). 2.8 - 66.2 IPM, FORWARD & REVERSE. YES, PENDANT CONTROL. YES, HORSEPOWER MAIN MOTOR. 13.
446 CFM, 125 PSIG, Ingersoll-Rand #SSR-EP100, Rotary Screw Compressor, 100 HP, 460 V.
ESS Industrial | Woodruff, SC
Seller: ESS Industrial
Location: Woodruff, SC
Mfr: Ingersoll-Rand
Model: SSR-EP100
, Horsepower: 100 HP, Capacity: 446 CFM, Rated Operating Pressure: 125 PSIG, Maximum Discharge Pressure: 128 - 135 PSIG, Fan Motor: 5 HP, Approximate Weight: 2,900 - 5,000 lbs, Dimensions: Approximately 67" H x 66" W x 61" D, Voltage: 3 Phase / 60 Hz 120V, Ingersoll-Rand SSR-EP100 pumps & hydraulics unit ...more
Ross #ME100L, Homogenizer
Federal Equipment Company | Cleveland, OH
Category: Homogenizers
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Ross
Model: ME100L
Used Ross MR100L Homogenizer, serial# 52509.
Omax #55100, CNC Waterjet, 55" x 100" max cutting size, 10' 6" x 5' 5"water tank, 30 HP, 2005
Equilibrium Machinery | Waukesha, WI
Category: Waterjet Cutters
Seller: Equilibrium Machinery
Location: Waukesha, WI
Mfr: Omax
Model: 55100
Year: 2005
2003 Omax 55100 CNC Water Jet, Maximum Cut Size 55” X 100”, Overall Size of Water Tank 10’6” x 5’5”, Z-Axis Travel 8”, Intensifier HP 30, Intensifier PSI 50,000, Speed 180 IPM, Accuracy/Repeatability +/- 0.001, Approximate Footprint (w/Controller) 12’11” x ...more
Doboy #GS1000S, high speed, mount over conveyor, double fold, hot melt glue, bag sealer, 100 FPM, mounted on 4 leg frame with locking casters
Frain Industries | Carol Stream, IL
Category: Sealers and Sealing Systems
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Doboy
Model: GS1000S
Bosch / Doboy, Model GS1000S, High speed, mount over conveyor, double fold, hot melt glue, bag sealer. Rated up to 100 feet per minute, with number of bags – depending on materials and application. Bag size: 3 to 20lbs. Bag Width: 3½" to 15". 183" Long x 4½" Wide product ...more
Dynapar #MS1-00, speed regulator w/ 5 alarms, 30 kHz, 117 VAC,
Dominion Air & Machinery Co | Roanoke, VA
Category: Electrical MRO Components & Parts
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Model: MS1-00
100 Ton, Standard #AB100-10, hydraulic, 101" between housing, 10' overall, 15 HP, 6" stroke, NEW
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Standard
Model: AB100-10
Tonnage 100 tons Hyd/Mech hydraulic Punching 66 BH (Distance Between Housings) 8' 5" Bed/Ram Length 10 feet Below Grade no Weight 19000 pounds Top Bed Width 35 inches Bed Width 3 inches Throat Depth 6 inches Ram Stroke (Fully Adjustable) 6 inches Open Height 13 inches Closed Height 7 inches Horsepower 15 Ram ...more
100 Ton, Dake #1EM-100, 15.75" stroke, 35" DLO, hydraulic, 5.5 HP, manual/elec, new
AM Metalmaq Inc | Hialeah, FL
Category: H Frame Hydraulic Press Machines
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Dake
Model: #1EM-100
Year: 2025
// Select Language Abkhaz Acehnese Acholi Afar Afrikaans Albanian Alur Amharic Arabic Armenian Assamese Avar Awadhi Aymara Azerbaijani Balinese Baluchi Bambara Baoulé Bashkir Basque Batak Karo Batak Simalungun Batak Toba Belarusian Bemba Bengali Betawi Bhojpuri Bikol Bosnian Breton Bulgarian Buryat Cantonese ...more
JUST ADDED!
100 gallon Ross #PD-100, Planetary Mixer, 304 Stainless Steel, 30 HP, 1990
Federal Equipment Company | Cleveland, OH
Category: Planetary Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: PD-100
Year: 1990
Used 100 Gallon Ross planetary mixer, model PD-100, 304 stainless steel construction, vacuum cover, high speed disperser driven by 30 hp motor, planetary mixer blade driven by 15 hp motor drive, with bottom and sidewall scrapper, (1) 100 gallon stainless steel jacketed vacuum mixing can, floor mounted with air over ...more
JUST ADDED!
Wacker Corporation SM100, 273 hours, S/N: WNMU0101EM0001655, 2023
Gregory Poole Equipment - Used | Raleigh, NC
Category: Compact Track Loaders
Seller: Gregory Poole Equipment - Used
Location: Raleigh, NC
Mfr: Wacker
Model: SM100
Year: 2023
CALL TO VERIFY LOCATION - 2023 USED WACKER SM100 COMPACT UTILITY LOADER
.
JUST ADDED!
Wacker Corporation SM100, 340 hours, S/N: WNMU0101LM0001653, 2023
Gregory Poole Equipment - Used | Raleigh, NC
Category: Compact Track Loaders
Seller: Gregory Poole Equipment - Used
Location: Raleigh, NC
Mfr: Wacker
Model: SM100
Year: 2023
CALL TO VERIFY LOCATION - 2023 USED WACKER SM100 COMPACT UTILITY LOADER
.
JUST ADDED!
Wacker Corporation SM100, 196 hours, S/N: WNMU0101AM0001618, 2023
Gregory Poole Equipment - Used | Raleigh, NC
Category: Compact Track Loaders
Seller: Gregory Poole Equipment - Used
Location: Raleigh, NC
Mfr: Wacker
Model: SM100
Year: 2023
CALL TO VERIFY LOCATION - 2023 USED WACKER SM100 COMPACT UTILITY LOADER
.
JUST ADDED!
Wacker Corporation SM100, 298 hours, S/N: WNMU0101LM0001619, 2023
Gregory Poole Equipment - Used | Raleigh, NC
Category: Compact Track Loaders
Seller: Gregory Poole Equipment - Used
Location: Raleigh, NC
Mfr: Wacker
Model: SM100
Year: 2023
CALL TO VERIFY LOCATION - 2023 USED WACKER SM100 COMPACT UTILITY LOADER
.
265 GPM @ 161' TDH, LobePro #SM100, Rotary Gear Slurry Pump Package, 15 HP, 70 psi, 2014
IronHub | Calgary, AB
Category: Slurry Pumps
Seller: IronHub
Location: Drayton Valley, AB
Model: SM100
Year: 2014
This is an unused surplus Positive Displacement Pump package, featuring a Rotary Gear pump model SM100 from Lobepro. It has a maximum horsepower of 15 and a capacity of 265 GPM. The package includes electric driver type by WEG and is capable of handling sweet service with a maximum pressure of 70 PSI. Please note that ...more
4" x 4" x 3/8" Bendmak #PRO-100, angle roll, 12.4" roll diameter, 3.93" shaft, #3839
Southern Fabricating Mchy Sales | Lithia, FL
Category: Angle Bending Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: PRO-100
4” X 4” Angle Roll Bending Machine with Machine Body Of Steel (ST-52) Construction, on Pro 100 Rolls are Driven By a Hydraulic Motor + Planetary Gearbox and Gears, Shafts Made of Special Steel, Hardened and Grounded, Pro 100 Guide Rolls are in Two Directions Hydraulic Adjustable, One Set Standard Rolls ...more
4" x 4" x 3/8" Bendmak #Pro-100, horizontal/vertical hydraulic angle bending roll, 3-rolls driven
Mohawk Machinery Inc | Cincinnati, OH
Category: Angle Bending Rolls
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Bendmak
Model: PRO-100
4 x 4 x 3/8" BENDMAK PRO 100 HORIZONTAL/VERTICAL HYDRAULIC ANGLE BENDING ROLL - 2012 - Manually Adjustable Side Guider Rolls - 15 HP Hydraulic Motor Planetary Gear Box w/Gears - 12.4" Diameter Rolls - Set of Universal Angle Bending Rolls, 4" x 4" x 3/8" BENDMAK HORIZONTAL/VERTICAL, ANGLE AND PROFILE BENDING, New 2012 ...more
4" x 4" x 3/8" Bendmak #PRO-100, angle roll, digital read out, hydraulic guide rolls, variable speed, 12.4" roll diameter, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Angle Bending Rolls
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Bendmak
Model: PRO-100
4” X 4” X ” Angle Roll with Digital Readout, Set of Universal Rolls, Hydraulic Guide Rolls, Variable Speeds, Horizontal and Vertical Working., Angle: 4” X 4” X ”, Flat Hard Way: 4” X 1”, Flat Easy Way: 7-½” X 1-”, Solid Square: 2-”, Round Bar: ...more
4" x 4" x 3/8" Bendmak #Pro-100, hydraulic angle roll, 12" roll diameter, 220 V., 3-phase, Beckoff digital controller
FMI Trading LLC | Vinton, TX
Category: Angle Bending Rolls
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Bendmak
Model: PRO-100
Product Information, Angle Rolls PRODUCT NEW - ON REQUEST: Type:Hydraulic Diameter of rolls:12" Rolled type:Universal Voltage / Phase:220 / 3 ::Digital Control: Beckhoff Weight:4,938 lbs Dimensions:54" x 82" x 70" Capacity:4" x 4" x 3/8", Product Code: 03040137084 Make: Bendmak Model: PRO 100 Condition: New.
24" x 40" Cumberland #X1000, Granulator, 3-Knife Rotor, (2) Bed Knives, Hardfaced Rotor & Cutting, 100 HP, 2023
Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Cumberland
Model: X1000
Year: 2023
Used 24" x 40" Cumberland Model X1000, 100 HP Three Knife Open Rotor 2 Bed Knives Hard Faced Rotor Hard Faced Cutting 100 HP AC Motor Hydraulic Hopper Tilt Rotating End Disks New In 2023 DOES NOT INCLUDE STARTER PANEL Approximate Dimensions & Weight: 106" Lx 84" W x 135" H, 14,000 LBS.
Cosmec #CM100, 12" dip chain gang saw, parts machine
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cosmec
Model: CM100
Cosmec CM100, 12" Dip Chain Gang Saw, Parts Machine Only.
JUST ADDED!
JINBAO #JF-1000, triplex mud pump, 905 HP @ 2100 RPM, Detroit engine, 2007
Global Power | Nisku, AB
Category: Pumpjack Engines
Seller: Global Power
Location: Nisku, AB
Model: JF-1000
Year: 2007
JINBAO JF-1000 Run by a 2000 Detroit Engine, GG6446 - Triplex Mud Pump SN T1003, Detroit 2000 Engine SN 5352005756 Engine 905 HP at 2,100 RPM., Nisku, www.globalpower.ca.
Jainnher #L100, CNC Cylindrical Roll Grinder
Relco Industries | Southampton, PA
Category: CNC Cylindrical Grinders
Seller: Relco Industries
Location: Southampton, PA
Mfr: Jainnher
Model: L100
Hess-Mae Machine International #L-100, Ozone Generator, Ozone Sterilization System, 19 g/hour Ozone Yield, 10 GPH required flow
Genemco | Hearne, TX
Category: Ozone Generators
Seller: Genemco
Location: Hearne, TX
Mfr: Hess Machine International
Model: L-100
Hess Machine International Ozone Sterilization System. Hess Machine Company, Ephrata-PA. Model: L-100. S/N: I20283-G. Ozone Yield: 19 g/hour. Required Flow (Cooling Water): 10 gph. less self contained air compressor, 0 to 110 Front Panel Voltage Control, overall dimensions 5ft. 3in. L x 2ft. 6in. W x 3ft. 9in. H. ...more
Brawn Mixer Baldor #BD-100 Motor 1 HP 208-230/480V 3.6-3.4/1.7A 1725RPM 60Hz 3PH
OK Sales Inc | Burlington, NC
Category: Miscellaneous Mixers and Blenders
Seller: OK Sales Inc
Location: Burlington, NC
Mfr: Brawn
Model: BD-100
Brawn Mixer Baldor BD-100 35N425-0087G1 Industrial Motor 1HP 208-230/480V 3.6-3.4/1.7A 1725RPM 60Hz 3PH Frame 56C, Condition Notes: Good owkring condition., Used working condition. Item pictured is the exact item you will receive, unless multiple quantities listed., Most Items ship same or next business day of payment ...more
JUST ADDED!
General Inspection #GI-100, Vision Sorting Machine, 600 PPM, 3 camera, 40mm diameter x 150 L parts max
Machinery Exchange International | Posen, IL
Category: Inspection Equipment
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: General Inspection
Model: GI-100
Gi incorporates hole inspection optics to specifically image and measure both the bottom of a hole and its vertical walls. This allows great of I.D. walls and the detection of very small defects like; chips, voids, cracks or other surface imperfections., Part Diameter Range: 2mm – 40mm, Part Length Range: 10mm ...more
Dabrico #DI-100, Inspection Unit, semi-auto, adjustable conveyor & spin speeds, 115 VAC, 1ph
Federal Equipment Company | Cleveland, OH
Category: Inspection Equipment
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Dabrico
Model: DI-100
Used Dabrico Inc semi automatic inspection unit, type DI-100, with adjustable conveyor and spin rate speeds, serial# 9527-2A.
Dabrico #DI-100, Vial Inspection Line, Stainless Steel base, with magnifier, controls on unit
Federal Equipment Company | Cleveland, OH
Category: Inspection Equipment
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Dabrico
Model: DI-100
Used Dabrico Vial Inspection Line, model DI-100, stainless steel base, with magnifier, controls on unit.
100 KW Magnum #MGG100M, Natural gas generator set, 480 Volts, 150 HP @ 1800 RPM, Generac EGNXB08.92C5 engine, sound attenuated enclosure, base fuel tank, 2014
Diesel-Powered.com | East Earl, PA
Category: Natural Gas Or Dual Fuel Generators
Seller: Diesel-Powered.com
Location: East Earl, PA
Mfr: Magnum
Model: MGG100M
Year: 2014
Stock#: IE100-382-GN Fuel: Natural Gas or Well Head Gas Year: 2014 Voltage: 480 Volts Hours: 1 Hour Phase: 1/3 Phase Make: Magnum Model: MGG100M Serial: 1409604 Hertz: 60 Hz Wires: 12 Lead Kilo Watts: 100 kW Mounted: Trailer Mounted Fuel Tank: Base Fuel Tank Enclosure: Sound Attenuated Enclosed: Enclosed Lead: ...more
Parpas #ML100, CNC horizontal boring mill floor type, 120 ATC, 236" X, 118" Y, 51" Z, #50, Fidia C20, 2006
Machnet | Santa Monica, CA
Seller: Machnet
Location: Santa Monica, CA
Mfr: Parpas
Model: ML100
Year: 2006
Parpas ML100 3+2 CNC Horizontal Boring Mill, Parpas ML100 3+2 CNC Horizontal Boring Mill, New: 2006, Fidia C20 Control, 3+2 Axis, Axis Travels, o X 236.0, o Y 118.0, o Z 51.0, Spindle type and Orientation, o Horizontal, o Cat 50, Heads, o Head Changer, o Straight head 4000 rpm, o A,C Head 6,000 rpm, 120 position tool ...more
JUST ADDED!
Pioneer #PFD-100, flatbed die cutter, 100" wide, powered table, coated roller
Plastimach Corp. | Tappan, NY
Category: Die Cutting Press Machines
Seller: Plastimach Corp.
Location: Tappan, NY
Mfr: Pioneer
Model: PFD-100
Used Pioneer Flatbed Die Cutter, Model PFD 100, 100" wide, powered tables, Coated roller, In Operation, Each side is 107.125 x 125.5 inches., It has controls on all 4 corners.
100 Ton, Standard Industrial #AB100-8, press brake, 8' overall, 77" between housing, 6" stroke, manual back gauge, 2001
Perfection Global | Elk Grove Village, IL
Category: Hydraulic Press Brakes
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Standard
Model: AB100-8
Year: 2001
Forming Capacity: 100 TonPunching Capacity: 66 TonDistance Between Housings: 6'5"Stroke: 6"Throat Depth: 6"Daylight: 13"Shut Height: 7"Bed & Ram Length: 8', Manual BackgaugeFull Tonnage Throughout Stroke.
100 KW MTU #DS100, diesel generator set, 120/208 Volts, 3-phase, 197 HP @ 1800 RPM, 4R 4.8L OM924LA engine, Tier 2, sound attenuated enclosure, 2017
DEPCO Power Systems | Houston, TX
Category: Diesel Generators
Seller: DEPCO Power Systems
Location: Houston, TX
Mfr: Mtu
Model: DS100
Year: 2017
Generator Set Type: Stand-By Engine Model: 4R 4.8L OM924LA Fuel Type: Diesel Voltage: 120/208 Model: DS100 Panel: with Autostart and Safety Shutdowns Batteries: Yes Hours: 500 Since New Frequency: 60 Cycles/Hz Phase: Three Phase, Notes, Good Used MTU DS100 Diesel Generator Set 100 kW, 208 V, 3 phase, 60 Hz Sound ...more
110 Ton, Amada #RG-100, CNC hydraulic press brake, 10' overall, NC9EX CNC
Asset Exchange Corporation | Elk Grove Village, IL
Category: Hydraulic Press Brakes
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Amada
Model: RG100
Metric size 100 Ton x 10' Tonnage 110 T Type HYD Overall Length 122" Between Housings 8' Stroke 3.93" # Axis 3 Dimensions 120" x 72" x 99" NC9EX CNC Back Gauge.
Doboy (Bosch) #GS1000S, Double Fold Bag Sealer, LR, seals up to 100' of bags/min, 3.5" x 15" width sizes, 3-20 lbs, Norson ProBlue7 hot melt, AB RPA Control
Aaron Equipment Co | Schaumburg, IL
Category: Sealers and Sealing Systems
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Doboy
Model: GS1000S
used- doboy (bosch) model gs1000s double fold left-to-right bag sealer. machine is rated for speeds up to 100' of bags per minute. has a bag size range: 3.5" to 15" (width). is capable of sealing 3 to 20 pound bags. will handle gussetted or multi-wall paper bags. has an adjustable height crank for a range of 35" ...more
1600 Amps, Westinghouse, SPB-100, 1600A Frame, 100kA @ 600 Volts, Pow-R Trip 7 Trip unit, manually operated Breaker
RS Breakers And Controls | Mississauga, ON
Seller: RS Breakers And Controls
Location: Saskatoon, SK
Mfr: Westinghouse
Model: SPB100
Westinghouse SPB 100, 1600A Frame, 100kA @600V, Pow-R Trip 7 Trip unit, MO Breaker. Quality: Used, Quantity:1., Pricing is available upon request.
JUST ADDED!
0.472" x 4.72" Nakashimada #NP-100, 2-Die 3-Blow Transfer Header, 40-120 pieces/min., 2-plane wire straightener, exit conveyor, 1994
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: NP-100
Year: 1994
Cutoff Diameter 12mm Cutoff Length 120mm 1st Die KO 160mm 2nd Die KO 100mm 1st PKO Kickout 20mm 2nd PKO Kickout 35mm 3rd PKO Kickout 15mm Pieces Per Minute 40 - 120 Weight 15000 Kg, Brankamp Mode ECO 600 process monitor, 2 Plane wire straightener, Exit conveyor, Stripper on 2nd Die.
Igasi #IG1002, Liquid Ring Vacuum Pump, Suction Flow 1200 - 2100 m3/h, Vacuum 200 - 600" mm Hg, 45KW, 2022, IG1002
Aaron Equipment Co | Schaumburg, IL
Category: Vacuum Pumps
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Igasi
Model: IG1002
Year: 2022
used igasi model ig1002 liquid ring vacuum pump. (nash cl1000); suction flow 1200 - 2100 m3/h; vacuum 200 - 600 mm hg; maximum power 45kw (60hp). liquid temperature 20?c ph= 6, th= 18?; suction connection dn125; supply connection dn100; liquid ring connection; 1"g shaft diameter 70 mm. built 2022. our freight ...more
100 Ton, M & N #7E100, 4 post hobbing press, 6" stroke
Hariton Machinery Co Inc | Bridgeport, CT
Category: Hobbing Presses
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: M & N
Model: 7E100
Tonnage 100 tons Stroke 6" Dimensions 3 x 3 x 5'H Weight 2000 pounds.
Metso #DR-100, 6-cell flotation cells
A M King Industries | Oroville, CA
Category: Flotation Cells
Seller: A M King Industries
Location: Oroville, CA
Mfr: Metso
Model: DR-100
Bank of 6 METSO Model DR-100 Flotation Cells, 2.8m3.
100 KW Caterpillar #D100, diesel generator set
Empire Power Systems | Phoenix, AZ
Category: Diesel Generators
Seller: Empire Power Systems
Location: Henderson, NV
Mfr: Caterpillar
Model: D100
Year: 2009
D100 2009 459HRS D4B01157, EMCP 3.2 CONTROL PANEL, UL LISTED 24 HOUR TANK, SOUND ATTENUATED ENCLOSURE, 3 POLE CIRCUIT BREAKER, 277/480V100KW, 12 LEAD RECONNECTABLE GEN END.
39" x 13-1/2" Acra #KV-100, saw blade welder, grinder, blade shear, work light, 65-265 FPM, 2 HP, new, #SMKV100
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Vertical Band Saws
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Acra
Model: KV-100
Throat 39-3/8" Operation: Manual Type: Ferrous/Non-Ferrous Max. Work Height 13-1/2" Table Size 17-3/4" x 19-1/2" Blade Length 178-5/8" Blade Width 1/8" - 5/8" Blade Speeds Low 65 - 265 FPM Blade Speeds High 400 - 1600 FPM Horsepower 2 H.P. Voltage 220/440V ~ 3 Phase Dimensions 50" x 55" x 85" WEIGHT 1,963 Lbs. s Made ...more
42"/49" x 172" Poreba #TR100-B1, heavy duty gap bed, 4-Jaw 31" chuck, Steady Rest, digital read out, #A4749
Sterling Machinery Exchange | South El Monte, CA
Category: Sliding & Gap Bed Lathes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Poreba
Model: TR100-B1
Capacity 42"/49" x 172" Spindle Nose A1 - 11 Cross Slide Travel 23-1/2" Spindle Speeds (21) 6.3 - 630 RPM Hole Thru Spindle 4-3/4" Distance Between Centers 172" Swing Over Bed 42" Swing Over Cross Slide 26-3/4" Swing in Gap 49" Top Slide Travel 19" Metric (62) 1 - 120 MM Inch (61) 1/2 - 60 TPI Horsepower Dimensions (L ...more
Haas #UMC-1000SS, 5-Axis CNC vertical machining center with 8 station pallet pool, 40" X, 25" Y, 25" Z, 12000 RPM, 50+1 side mount tool changer, 2020
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Haas
Model: UMC-1000SS
Year: 2020
Haas UMC1000SS with 8 Station Pallet Pool Super Speed 5-Axis VMC 5-Axis CNC Vertical Machining Center (subject to buyer verification):TravelsX Axis40.00 inY Axis25.00 inZ Axis25.00 inSpindle Nose to Platter (~ max)29.0 inSpindle Nose to Platter (~ min)4.0 inSpindleMax Rating30.0 hpMax Speed 12000 rpmMax Torque 90.0 ...more
90 cfm, Conair Franklin #CD100, Air Dryer, 240 V
iGAM | Detroit, MI
Category: Desiccant Compressed Air Dryers
Seller: iGAM
Location: Detroit, MI
Mfr: Conair
Model: CD100
CONAIR FRANKLIN CD100 Air Dryer for sale. Manufactured by CONAIR FRANKLIN, model CD100. Used condition, ideal for efficient drying applications. Secure this reliable piece of equipment today., Spec Sheet, CONAIR FRANKLIN CD100, Dimensions. 65X38X72, Weight. 450 LBS.
Bertolette #CD100, motorized coil reel, 12" width, 48" outside dimensions, 3-arm mandrel, vari-speed, 1/4 HP
Yoder Machinery Sales | Holland, OH
Category: Uncoilers and Centering Coil Reels
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bertolette
Model: CD100
MODEL. CD100, WIDTH. 12", MANDREL. 3 ARM, MOTORIZED. YES, VARIABLE SPEED. YES, OUTSIDE DIAMETER. 48", FERGUSON DRIVE. YES, MOTOR. 1/4 HP.
90 cfm, Conair Franklin #CD100, Air Dryer
iGAM | Detroit, MI
Category: Desiccant Compressed Air Dryers
Seller: iGAM
Location: Detroit, MI
Mfr: Conair
Model: CD100
CONAIR FRANKLIN CD100 Air Dryer available for sale, used condition. Reliable equipment from a trusted manufacturer, ideal for efficient moisture control. Contact for more on this versatile model., Spec Sheet, CONAIR FRANKLIN CD100, Dimensions. 65X38X72, Weight. 450 LBS.
Sussman #SSB100, Electric Steam Boiler, 102 kW, 480 Volts, 3Ph, ASME, National Board
C3 Surplus LLC | Miami, FL
Category: Electric Boilers
Seller: C3 Surplus LLC
Location: Miami, FL
Model: SSB100
OVERVIEW, Sussman Electric Steam Boiler, Model SSB100, Serial# N6-13488, National Board# 16895 Approximate 102kw, 3/60/480V, with tank & condensate return. Sussman Model 998-100 electric steam boiler removed from operating facility. This compact commercial-grade steam generator s 102 kW electric input capacity. ...more
100 Ton, Advanced Hydraulics #CS-100, 2550 psi, 24" x96" table, 14" throat, 6" cylinder (2 available)
Inter-Plant Sales | Hugo, MN
Category: Hydraulic Presses
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Advanced Hydraulics
Model: CS-100
72" Allied Duraflow #AHM-100, flex lip sheet extrusion die, back center feed
Perry Videx LLC | Hainesport, NJ
Category: Extrusion Dies
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Allied
Model: AHM-100
72" wide Allied "Duraflow" AHM-100 flex lip sheet extrusion die. Job #AD2763. Lip opening.001"-.100" opening. Has back center feed, 4" W X 1.753" H., ALLIED DIES, INC. AHM-100.
Cleaver-Brooks #SM100-100, Spraymaster Deaerator, 100000 lb./hr spray capacity, 10 - 30 min. storage capacity
Lenmark Industries | Langley, BC
Category: Deaerators
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Cleaver-Brooks
Model: SM100-100
SKU: 120596, Model: SM100-100, Condition: Used, S/N: DC-6824, Additional :, Spray Capacity: 100,000 lbs/hr, Storage Capacity: 10 to 30 minutes.
JUST ADDED!
Schugi #FX-100, Flexomix Agglomerator, Stainless Steel, 5 HP, Modicon PLC, 1994
Federal Equipment Company | Cleveland, OH
Category: Inline Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: FX-100
Year: 1994
Used Schugi Flex-o-Mix agglomerator, model FX-100, stainless steel product contact surfaces, driven by 5 hp, 460 volt motor, Accurate powder feeder with 1.5" diameter feed port, Serial# 9401046-000, Braun & Luebbe liquid injection feed pump, model N-P41, driven by.5 hp motor with MIicromotion flow meter on cart ...more
CVC #CVC100B, labeler, 110 V.
HGR24 | Euclid, OH
Category: Labeling Machines
Seller: HGR24
Location: Euclid, OH
Model: CVC100B
Inventory No. 0523-158-0015 Manufacturer Cvc Model No. CVC100B Name Labeler Arrival Date 08-11-2023 Dimensions L x W x H (inches) Unavailable Electrical 110 V Weight (lb.) 1 Category Packaging Condition Used Available Quantity 1 Serial No. 10106034.
Bobcat MT100, Track Loader, 379 hours, S/N: B52P37248, 2023
Toromont Cat - Heavy Machinery | Concord, ON
Category: Compact Track Loaders
Seller: Toromont Cat - Heavy Machinery
Location: Ottawa, ON
Mfr: Bobcat
Model: MT100
Year: 2023
AUGER, Bucket, Coupler Type - Mechanical, Hammer.
1000 lb. Bobcat #MT-100, Mini Track Loader, 200 hours, 23 HP, 2022
Aucto | San Francisco, CA
Category: Skid Steers
Seller: Aucto
Location: Santa Clarita, CA
Mfr: Bobcat
Model: MT-100
Year: 2022
CVC #CVC100B, Label Head, 110 V., on stand
Federal Equipment Company | Cleveland, OH
Category: Labeling Machines
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: CVC100B
Used CVC label head, model CVC100B, 110 volt on stand, serial# 10106034.
100 KW Magnum #MGG100M, Natural gas generator set, 480 Volts, 722 hours, 150 HP @ 1800 RPM, Generac EGNXB08.92C5 engine, sound attenuated enclosure, 2014
Diesel-Powered.com | East Earl, PA
Category: Natural Gas Or Dual Fuel Generators
Seller: Diesel-Powered.com
Location: East Earl, PA
Mfr: Magnum
Model: MGG100M
Year: 2014
Stock#: IE100-383-GN Fuel: Natural Gas or Well Head Gas Year: 2014 Voltage: 480 Volts Hours: 722 Hours Phase: 1/3 Phase Make: Magnum Model: MGG100M Serial: 1405825 Hertz: 60 Hz Wires: 12 Lead Kilo Watts: 100 kW Mounted: Trailer Mounted Fuel Tank: Base Fuel Tank Enclosure: Sound Attenuated Enclosed: Enclosed Lead: ...more
Nederman #OMF-1000, 2 stage Oil Mist Collector, 2 x 7.9" inlets, 589 cfm, 104°F internal fan, 1.5 HP, 460 V., w/ 1 optional filter element
Machinery Exchange International | Posen, IL
Category: Oil Recovery Systems
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Nederman
Model: OMF-1000
The Nederman OMF (Oil Mist Filter) is designed to handle large amounts of oil mist during continuous operation. They are engineered for high efficiency filtration coupled with lower maintenance costs., Nederman OMF 1000-2 has as standard 2 filter-stages where the first stage consists of filter cassettes with ...more
Unipac #Silver-100, automatic, hot air, plastic or laminate tube filler & sealer, 10-40 tubes/min
Frain Industries | Carol Stream, IL
Category: Filling Equipment (Fillers)
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Unipac
Model: SILVER-100
Unipac, Model Silver 100, automatic, hot air, plastic or laminate tube filler and sealer. Rated from 10 to 40 tubes per minute – depending on materials, application and machine configuration. Tube size range: 10mm to 50mm in Diameter; 50mm to 250mm in Height. Fill size range: 3ml to 230ml, Proper change parts ...more
Romaco #MZ100, Stainless Steel, toothed colloid mill w/16" OD x 19" D Stainless Steel conical product hopper w/lift off cover
Frain Industries | Carol Stream, IL
Category: Colloid Mills
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Romaco
Model: MZ100
Romaco Model MZ100, stainless steel, toothed colloid mill with production rates from 200 to 2,000 kg’s of product per hour – depending on materials and application. 16" OD x 19" Deep stainless steel, connical product hopper with lift off cover. 2-1/2" sanitary side port, with recirculation ...more
ABB Commander #CR100, strip chart recorder, w/ ink
Dominion Air & Machinery Co | Roanoke, VA
Category: Chart Recorders
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Abb
Model: CR100
10000 lb. Perfecto #DR100-14/38-14-7, servo feed line, 14" @ .250" cap., 1992
S & G Press & Machinery Sales | Shelby Township, MI
Category: Coil Feed Lines
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Perfecto
Model: DR100-14/38-14-7
Year: 1992
Coil Weight 10000 pounds, Coil Width 14 inches, Coil Thickness.250 inches, Coil weight capacity: 10,000 Lbs., Coil width capacity: 14", Stock thickness capacity:.250" @ 14" Wide, I.D. Expansion range: 20" Adjustable, Coil OD capacity: 60", Serial No.: SS-91086, Double End Coil Reel Model No. DR100-14, Three leaf ...more
Wittenstein #SP100S-MF1-5-0G1-2S, Gear Box, 2015
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Wittenstein
Model: SP100S-MF1-5-0G1-2S
Year: 2015
Inventory No. 1025-017-0046 Manufacturer Wittenstein Model No. SP100S-MF1-5-0G1-2S Name Gear Box Arrival Date 11-04-2025 Dimensions L x W x H (inches) 19 x 12 x 8 Weight (lb.) 12 Category Motors Condition New Available Quantity 1 Serial No. 3432304 Item New, Made In Germany.
100 Ton, Minster #90-100, knuckle joint press, 1-1/2" stroke, 12" Shut Height, 1/2" ram adjustment, 0-60 SPM, air clutch & brake, 1940
Hariton Machinery Co Inc | Bridgeport, CT
Category: Knuckle Joint Press Machines
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Minster
Model: 90-100
Year: 1940
Stroke 1-1/2" Bed Area (R-L/F-B) 25" x 23" Ram Area (R-L/F-B) 15" x 12" Shut Height SDAU 12" Ram Adjustment 1/2" Stroking Speed 0-60 SPM Floor Space (O.A. Dim.) 78"L x 72"W x 130"H Weight 15,000 Lbs., Air Clutch /Brake, One Shot Lubrication, Flood Coolant, Vari-Speed Drive, Palm Button Controls.
Doboy #GS1000S, high speed, mount over conveyor, double fold, hot melt, bag sealer, 0-100 FPM
Frain Industries | Carol Stream, IL
Category: Sealers and Sealing Systems
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Doboy
Model: GS1000S
Doboy Model GS1000S, high speed, mount over conveyor, double fold, hot melt, bag sealer rated from 0 to 100 feet per minute, with number of bags – depending on materials and application. Bag size range: 3 lbs to 20 lbs, Bag Width: 3.5" to 15". top bag carrier chain, outer glue seal station with hot ...more
100 KW Caterpillar #XQ100, diesel generator set, S/N D4D02185, 2012
Empire Power Systems | Phoenix, AZ
Category: Diesel Generators
Seller: Empire Power Systems
Location: Phoenix, AZ
Mfr: Caterpillar
Model: XQ100
Year: 2012
75 HP Frick #RDB-100B, Rotary Screw Compressor Package, 460 V., 4500 RPM, 350 PSIG, 2003
Genemco | Hearne, TX
Category: Gas Screw Compressors
Seller: Genemco
Location: Hearne, TX
Mfr: Frick
Model: RDB-100B
Year: 2003
Used Frick RDB Rotary Screw Compressor Package. Unit Model No: RDB-100B. Unit Serial No: S0132PFMFTHAA03. Frick Sales No: 2657650100. Refrigerant: R-717. Max Design Pressure: 250 PSIG. Frick TDSL Rotary Bare Screw Compressor: Model: TDSL193L. Serial No: 0228CC. Refrigerant: R717. Volume Ratio: 2.8. Max Speed RPM: ...more
British Rema #AJ-100, Opposed Jet Mill, Stainless Steel, 3 jets, on stand
Federal Equipment Company | Cleveland, OH
Category: Fluid Energy Mills (Micronizers)
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: AJ-100
Used British Rema Manufacturing Opposed Jet Mill, Model AJ-100, stainless steel construction, with (3) jets, volumetric feeder, on stand, serial# H61527.
British Rema Manufacturing #AJ-100, Opposed Jet Mill, Stainless Steel, volumetric feeder, stand
HGR24 | Euclid, OH
Category: Fluid Energy Mills (Micronizers)
Seller: HGR24
Location: Euclid, OH
Model: AJ-100
Inventory No. 0825-057-0032 Name British Rema Manufacturing Opposed Jet Mill, Model Aj-100 Arrival Date 12-16-2025 Dimensions L x W x H (inches) Unavailable Weight (lb.) 1 Category Chemical Processing Condition Used Available Quantity 1 Item Used British Rema Manufacturing Opposed Jet Mill, Model Aj-100, Stainless ...more
440 cfm, 100 psig, U.S. Motors Air Compressor #US100DI screw air compressor, 100 HP, 480 V.
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Los Angeles, CA
Mfr: Us Air Compressors
Model: US100DI
US Air Compressor Model US100DI rotary screw air compressor, rated for 440 cubic feet per minute (CFM), working pressure of 100 PSI. Has a maximum pressure of 190 PSI. Driven by a 100 HP motor with an airend speed of 2400 RPM. Rated for 480 volts, 60 hertz, 3-phase electrical input. Removed from cosmetics facility. ...more
