251 - 300 of 716 listings
80 Ton, HPM, 20" x 20", upact 4-post, 16" stroke, 15" daylight, 44" work height, some valves, #250
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hpm
DISTANCE BETWEEN POSTS: 24" L to R X 11" F to B. POST DIAMETER 3". DAYLIGHT 15 \u00bd" WITH DRILLED & TAPPED TOOL MOUNTING PLATES, DAYLIGHT WITHOUT PLATES 19 \u00bd". APPROX STROKE 16". 10" DIAMETER MAIN RAM, SINGLE ACTING, RATED AT 2000 PSI. 1" NPT PORTS. TWO 2 \u00bd" DIAMETER PUSH BACK CYLINDERS. REMOVABLE PUSH ...more
80 Ton, Taylor-Winfield, 96" x64", 2.5" stroke, 16.5" daylight, toggle, 32" work height, 66" tall, #137
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Taylor-Winfield
SERIAL #58192. NOMINAL PLATEN SIZE: 96" L to R X 64" F to B. OVERALL BED AREA 113" L to R X 64" F to B. DISTANCE BETWEEN POSTS 96 \u00bd" L to R X 48 \u00bd" F to B. POST DIAMETER 4". DAYLIGHT 16\u00bd". APPROX STROKE 2 \u00bd". FULLY GUIDED MOVING BOLSTER WITH 18" LONG BUSHINGS. TOGGLE LINKAGE IS ACTIVATED BY AN 8" ...more
80 Ton, Williams White, 120" x 60", up-act, 34" daylight, 24" stroke, (8) 5" bore cyls, #60
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Williams
EIGHT 5" BORE CYLINDERS WITH APPROX. 24" STROKE. MAX DAYLIGHT IS 34". OPERATOR HEIGHT IS 39". CLEARANCE BETWEEN POSTS LEFT TO RIGHT IS 122"; FRONT TO BACK IS 35" (NOMINAL BED OF 120" X 60"). FULLY GUIDED WITH 6" BUSHINGS ON 4" DIAMETER TIE RODS. OVERALL DIMENSIONS: 150" X 62" X 102" TALL. APPROX 25,000 POUNDS. ...more
80 Ton, Yao Sheng #TSH-TUVB-830, hydraulic press, 6" stroke, 10 HP, automatic cycle, 2008, #68633
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yao Sheng
Model: TSH-TUVB-830
Year: 2008
YEAR NEW. 2008, MODEL. CH-HA830, CAPACITY. 80 TON, STROKE. 6" APPROXIMATE, RAM. 9.5" X 10", AREA OF T SLOTTED BED. 27" X 17", OPEN HEIGHT. 8", CLOSED HEIGHT. 2", DISTANCE BETWEEN HOUSING. 28-1/2", DIAMETER OF CYCLINDER ROD. 6", DUAL PALM BUTTONS. YES, AUTO CYCLE. YES, MOTOR. 10 HORSEPOWER.
JUST ADDED!
80 Ton, Yao Sheng #TSH-TUVB-830, hydraulic press, 10" x 10" ram, 16" x 27" bed area, 2007
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yao Sheng
Model: TSH-TUVB-830
Year: 2007
MODEL. TSH-TUVB-830, YEAR. 2007, CAPACITY. 80 TON, RAM. 10" X 10", AREA OF BED. 16" X 27", HYDRAULICS (#123).
Get email updates for newly added Hydraulic Presses
Hydraulic Presses (also known as hydraulic molding presses or hydraulic stampers) are machines that use hydraulic force to apply pressure for shaping, forming, or compressing materials. Commonly used in industries like automotive, metalworking, and manufacturing, they are ideal for tasks such as metal stamping, plastic molding, and rubber pressing. Hydraulic presses are essential for producing high-quality parts with precise force and control in heavy-duty applications.
80 Ton, Yao Sheng #TSH-TUVB-830, hydraulic press, 16" x27" bed, 10" x10" ram, 2007, #68632 (3 available)
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yao Sheng
Model: TUVB-1J0P
Year: 2007
MODEL. TSH-TUVB-830, YEAR. 2007, CAPACITY. 80 TON, RAM. 10" X 10", AREA OF BED. 16" X 27", HYDRAULICS (#109).
88 Ton, Seyi #MK88, hydraulic gap OBG punch press, 5.9" stroke, 40-75 SPM, 1996, #67685
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Seyi
Model: SEYI MK88
Year: 1996
SERIAL. EW0-115, MODEL. SEYI MK88, CAPACITY. 88 TON, YEAR. 1996, STROKE. 5.9", SPM. 40-75, DIE HEIGHT. 13", ADJUSTMENT. 3.1", SLIDE. 22" X 18.1", AREA OF BED. 41.3" X 23.6", MOTOR. 10HP / 440V / 3PH, LIGHT CURTAINS, SMART PACK 2.
92 Ton, Williams, 24.5" x20", up-act 4-post, 12" stroke, 25" daylight, 50 HP, 42" work height, #36
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Williams
SERIAL #C-3135. FRONT TO BACK BETWEEN THE POSTS IS 10.5". NOMINAL BED AREA IS 24.5" X 20". MAIN RAM IS APPROX 10" DIAMETER WITH 12" STROKE. 25" DAYLIGHT: FULLY GUIDED WITH 8.5" BUSHINGS ON 3.25" DIAMETER POSTS. 42.5" OPERATOR HEIGHT. TWO 3" BORE SINGLE-ACTING PUSH-BACK CYLINDERS. T-SLOTTED BED AND CROWN. HYDRAULIC ...more
95 Ton, Betenbender #8-95T, hydraulic press, 8' OA, 78" BH, 6" stroke, misc tooling, 2013
Machinery Marketing International | Chicago, IL
Category: Hydraulic Presses
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Betenbender
Model: 8-95T
Year: 2013
Tonnage: 95, Max Length: 8', Distance Between Housings: 78", Stroke: 6".
95 Ton, 15" x 16", upact 4-post, 16" stroke, 21" .5" DL, pullbk.cyls, 33" work height, #694
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
ADJUSTABLE DAYLIGHT FROM 21" TO 27 \u00bd". APPROX STROKE 16". 9" DIAMETER, SINGLE-ACTING MAIN RAM RATED AT 3000 PSI WITH A \u00be" NPT PORT. 2 \u00bd" DIAMETER POSTS. HALF SURROUND GUIDES ON MOVING BOLSTER. OVERALL PLATEN SIZE: 18 \u00bd" L to R X 16" F to B. DISTANCE BETWEEN POSTS: 16" L to R X 8" F to B. TWO PUSH ...more
100 Ton, Advanced Hydraulics #CS-100, 2550 psi, 24" x96" table, 14" throat, 6" cylinder (2 available)
Inter-Plant Sales | Hugo, MN
Category: Hydraulic Presses
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Advanced Hydraulics
Model: CS-100
100 Ton, Advanced Hydraulics, hydraulic press, 6.25" x 22" piston, 119.5" x 24" x 1.5"table
Machinery Network Inc | Encino, CA
Category: Hydraulic Presses
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Advanced Hydraulics
100 Tons, Piston: 6.25" dia. x 22"L, Table: 119.5"L x 24"W x 1.5" Thick, Dimensions: 120"L x 65"W x 125"H (includes cage height).
100 Ton, Beckwood #31144, hydraulic press, 8" stroke, 23" daylight, 42" x24"bed, 230/460 V., 3-ph, 1996
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Beckwood
Model: 31144
Year: 1996
MODEL: 31144 SERIAL #: 18636 8" STROKE 23" DAYLIGHT, 4" BORE 42" x 24" BED 42" x 24" RAM 14" x 44" BETWEEN POSTS VICKERS HYDRAULICS, 2500 MAX PSI FLOOR STANDING, 30 GALLON TANK SINGLE & AUTO, SPEED 2.5 SEC DOWN, 2.5 SEC UP YEAR: 1996 68" LR X 56" FB X 109" TALL ESTIMATED WEIGHT 6000#, 68"LR x 56" FB X 109" TALL 10 ...more
JUST ADDED!
100 Ton, BLS Lamination Press
JRD Bipel | Aldridge, UK
Category: Hydraulic Presses
Seller: JRD Bipel
Location: Aldridge, Europe
Mfr: Bls
Model: 100T
Key and Operational s:, Tonnage: 100 tons (nominal force) Platen Heating: Oil-heated platens Platen Dimensions: 2000mm x 2000mm Cylinder in need for repair, Speak with our engineering team today to discuss how this press can be utilised in your production line. If this press does not meet your needs, reach out today ...more
100 Ton, Greenerd #H-100-30L5, hydraulic press, 12" stroke, 20" daylight, 20" x21.25"bed, T-Slotted
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Greenerd
Model: H-100-30L5
Stroke 10 inches Daylight 21.75 Ram Size 32" x 27" Bed Size 32" x 27" Bolster Thickness 4 inches Windows 14 inches Year 1986 Floor Sanding yes Motor HP 30 Approximate Weight 14000 Approximate Dimensions 86"FB x 56"LR x 118"T Maximum operating presssure 2546 PSI Reservoir Capacity 175 Gallons Cylinder Diameter 7" Fast ...more
100 Ton, Greenerd #H-100-45, hydraulic press, 18" stroke, 24" daylight, 28" x20"bed, 13" throat, 8" cylinder
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Greenerd
Model: H-100-45
ORDER 100, 18" STROKE, 24" DAYLIGHT, 22" X 9.5" RAM, 28" X 20" BED, PALM BUTTONS, 13" THROAT, 8" CYLINDER, NEEDS CONTROL BUILD HAVE PANEL, SPEEDS, ADVANCE 102 IPM, PRESSING 95 IPM, RETURN 202 IPM, 60 HP 230/460/60/3, 69" X 44" X 102", 42" X 72" X 112", 15,000 LBS APROX.
100 Ton, Greenerd #HCT-100, hydraulic press, 10" stroke, 21.7" daylight, 32" x27"bed, 14" windows, 1986
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Greenerd
Model: HCT-100
Year: 1986
Stroke 10 inches Daylight 21.75 Ram Size 32" x 27" Bed Size 32" x 27" Bolster Thickness 4 inches Windows 14 inches Year 1986 Floor Sanding yes Motor HP 30 Approximate Weight 14000 Approximate Dimensions 86"FB x 56"LR x 118"T Maximum operating presssure 2546 PSI Reservoir Capacity 175 Gallons Cylinder Diameter 7" Fast ...more
100 Ton, Greenerd, hydraulic press, 18" stroke, 24" daylight, 28" x 20" bed, 13" throat, 60 HP
Timco Inc | Columbia, TN
Category: Hydraulic Presses
Seller: Timco Inc
Location: Columbia, TN
Mfr: Greenerd
GREENERD 100 TON HYD PRESS, STOCK# 14401J, 18" STROKE, 24" DAYLIGHT, 22" X 9.5" RAM, 28" X 20" BED, PALM BUTTONS, 13" THROAT, 8" CYLINDER, NEEDS CONTROL BUILD HAVE PANEL, SPEEDS, ADVANCE 102 IPM, PRESSING 95 IPM, RETURN 202 IPM, 60 HP 230/460/60/3, 69" X 44" X 102", 42" X 72" X 112", 15,000 LBS APROX, FOB: MONCLOVA ...more
100 Ton, Hamilton, 96" LR x 60" FB, down-acting 4-post, 48" stroke, 87" daylight, 60 HP, #2699
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hamilton
Hamilton. Serial #090696-22068. Overall bed L to R is approx. 115". F to B between the posts is 42". The nominal bed size is 96" x 60". Max daylight is approx 87". Two 8" bore cylinders with approx. 5.5" diameter rods and 48" max stroke. Shut height of 39". Operator height is approx. 31". Posts are 5" diameter with ...more
100 Ton, Lawton, 49" x42", 46" daylight, 36" stroke, 20" operator height, 12" bore/10" rod, down-acting, #2722
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Lawton
Lawtomatic. Serial #100921. 48" x 42" nominal bed size. 49" L to R x 31" F to B between the posts. 60" L to R overall. 12" bore cylinder with a 10" diameter rod and 36" max stroke. Approx 44" max daylight. Fully guided with 14" guides on 4.5" diameter posts. Several drilled and tapped holes in bed and slide. Approx ...more
JUST ADDED!
100 Ton, M & N #1R, hydraulic 4-post downacting press, 12" stroke, 3000 PSI, 3 GPM pump
D & H Machinery Inc | Toledo, OH
Category: Hydraulic Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: M & N
Model: 1R
100 Ton M & N Hydraulic Press, -Model Number: 1R, -Type: 4 Post Downacting, -Capacity: 100 Ton, -Stroke: 12", -Pressure: 3000 PSI, -Pump Output: 3 GPM, -In Storage.
JUST ADDED!
100 Ton, M & N #1R-100, hydraulic 4-post downacting press, 12" stroke, 3000 psi, 3.4 GPM pump
D & H Machinery Inc | Toledo, OH
Category: Hydraulic Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: M & N
Model: 1R-100
100 Ton M & N Hydraulic Press, -Model: 1R 100, -Type: 4 Post Downacting, -Capacity: 100 Ton, -Stroke: 12", -Pressure: 3000 PSI, -Pump Output: 3.4 GPM, -In Storage.
100 Ton, Machine Technologies, hydraulic downacting, 36" x 36" die, 18" stroke, 12" SH, 1989
Inter-Plant Sales | Hugo, MN
Category: Hydraulic Presses
Seller: Inter-Plant Sales
Location: Hugo, MN
Mfr: Machine Technologies
Year: 1989
Machine Technologies 100 Ton Hydraulic Down Acting, S# 88-75201-01, Date Mfg. 1/19/89, 100 Ton capacity, 36" x 36" Die area, 4.5" Dia. top center hydraulic cylinder, 18" Est. stroke, 12" Shut height, Top platen 36"W x 32"FB x 4.25"H, Bottom platen 36"W x 35"FB x 4.25"H, 100 Gal. Hydraulic tank, 20hp 220/440v 3ph ...more
100 Ton, Magnum #MSS95A, 51" x 36" bed, 34" open height, 8" stroke, 26" Shut Height, Allen Bradley controls, 2011
Variegate Inc | Huntsville, AL
Category: Hydraulic Presses
Seller: Variegate Inc
Location: Huntsville, AL
Mfr: Magnum
Model: MSS95A
Year: 2011
, LOW Stroke Count!, Capacity: 19.6 to 98.2 tons, Daylight: 34", Shut Height: 26", Bolster Height: 36", Bed Size: 51" LR x 36" FB, Stroke: 1" to 8", Rapid Advance: 411 ipm, Pressing: 66 ipm, Retract: 395 ipm, Motor HP: 30, Light Curtains Front, Hard Guarding Back and Sides, 40% additional panel space, 110 Volt Outlet ...more
100 Ton, PHI, 18.5" x 18.5" electric platens, (2) 7" daylight, 12" stroke, 1.5 HP, #1982
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Phi
MODEL S100-354C-14-Y4-D. SERIAL #70-4-020. THREE 18.5" X 18.5" X 2.5" ELECTRICALLY HEATED PLATENS WITH OPTIONAL WATER-COOLING. TWO DAYLIGHTS OF APPROX 7" EACH. APPROX 16.5" DAYLIGHT WITH CENTER PLATEN REMOVED. OPTIONAL RAM SPACER THAT IS APPROX 5" TALL. THAT WOULD REDUCE DAYLIGHT ACCORDINGLY. CLAMP CYLINDER HAS APPROX ...more
100 Ton, PHI, 24" x 24" steam/oil platens, (4) 3" openings, 12" stroke, SLC 500,2003, #2164
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Phi
Year: 2003
MODEL #5100R2424S-5CCS-R-Y(2)-58. SERIAL #03-03-001. CURRENTLY SET UP WITH FIVE 24.5" X 24.5" X 2" PLATENS THAT WERE BEING STEAM-HEATED AND WATER-COOLED. MAX OPERATING TEMP IS APPROX 350 F. FOUR DAYLIGHT OPENINGS OF APPROX 3" EACH; WITH JUST TWO PLATENS INSTALLED THE DAYLIGHT WOULD BE APPROX 18". CLAMP CYLINDER IS: 9" ...more
100 Ton, PHI, 12.5" elec.heat/water cooled platens, 11" daylight, 14" stroke, 1985, #1195
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Phi
Year: 1985
MODEL #S100R1212S-2HCS-P-Y2-S8-R-X19. SERIAL #85-9-002. NEW IN 1985. ELECTRICALLY HEATED AND WATER COOLED PLATENS: 12.5" X 12.5" WORK SURFACE; OVERALL DIMENSION OF PLATENS INCLUDING INSULATION AND TERMANAL COVER ARE 13.75" L TO R X 20" F TO B X 3" THICK. EIGHT CARTRIDGE HEATERS PER PLATEN. PRESS CROWN AND SLIDE ARE ...more
100 Ton, Press Master #100T-E/H, pressure regulator, 12" stroke, 8" bore, double acting, #134265
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: 100T-E/H
100 TON PRESSMASTER H-FRAME HYD. PRESSMODEL HFP-100NEW - IN STOCK FOR IMMEDIATE DELIVERY RATED CAPACITY, TONNAGE. 100STROKE. 12"BORE. 8"RAM SPEED PRESS. 20 IPM RETURN. 26 IPMDISTANCE BETWEEN POSTS (RIGHT TO LEFT). 42"DISTANCE BETWEEN POSTS (FRONT TO BACK). 13"MAXIMUM DISTANCE FROM BED TO ...more
100 Ton, St. Lawrence, 84" x70", down-act, 4-post, 20" stroke, 40" daylight, floor standing, #2307
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: St. Lawrence
NOMINAL BED SIZE IS 84" X 70". L TO R OVERALL IS 95"; F TO B BETWEEN THE POSTS IS 57". TWO 6" BORE CYLINDERS WITH 4" ROD DIAMETER AND APPROX 20" MAX STROKE. MAX DAYLIGHT IS APPROX 40.5". OPERATOR HEIGHT IS APPROX 36". FULLY GUIDED WITH 30" BUSHINGS ON 4" DIAMETER POSTS. FIVE T-SLOTS FRONT TO BACK IN BED AND SLIDE. ...more
100 Ton, Sutherland #SPC, Auto Stamper Hydraulic Press, 2001
TNT Industrial | Orange, CA
Category: Hydraulic Presses
Seller: TNT Industrial
Location: Orange, CA
Mfr: Sutherland
Model: SPC
Year: 2001
Find many great new & used options and get the best deals for 2001 SUTHERLAND SPC 100 TON "AUTO STAMPER" HYDRAULIC PRESS. Free shipping for many products!.
100 Ton, Tox Pressotechnik #PCG-100-E27.9, hydraulic press, 7.8" stroke, 27.5" daylight, 1996
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Tox Pressotechnik
Model: PCG-100-E27.9
Year: 1996
MODEL #: PCG-100-E27.9, SERIAL #: 66293306, 7.87" STROKE,.94" POWER STROKE, 145 MAXIMUM P.S.I.G., 27.50" MAXIMUM DAYLIGHT TOP OF BOLSTER, 38" LR x 19" FB RAM, 44" LR x 28" FB BED, T-SLOTTED BOLSTER, PALM BUTTONS, 14" THROAT, 02-1996 MANUFACTURED, 44" LR x 58" FB x 150 TALL APPROXIMATE DIMENSIONS, 12000 ;BS ESTIMATED ...more
100 Ton, Tox Pressotechnik #PCG/100, hydraulic press, 7.8" stroke, 27.2" daylight, 14" throat, 2002
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Tox Pressotechnik
Model: PCG/100
Year: 2002
MODEL #: PCG/100, SERIAL #: 28893831, 7.87" STROKE,.94" POWER STROKE, 145 MAXIMUM P.S.I.G., 27.25" MAXIMUM DAYLIGHT TOP OF BOLSTER, 38" LR x 19" FB RAM, 44" LR x 28" FB BED, 4-3/8" T-SLOTTED BOLSTER, PALM BUTTONS, 14" THROAT, YEAR: 2002, 44" LR x 58" FB x 150 TALL APPROXIMATE DIMENSIONS, 12000 LBS ESTIMATED WEIGHT ...more
100 Ton, Wabash #100-18-2TMBAC, 4 post hydraulic press, 7" stroke, 18" x 18" heated platens
Alma Machinery Co-Ann Arbor MI | Ann Arbor, MI
Category: Hydraulic Presses
Seller: Alma Machinery Co-Ann Arbor MI
Location: Jackson, MI
Mfr: Wabash
Model: 100-18-2TMBAC
Year: 2012
CAPACITY 100 TONS, STROKE 7", MAX. DAYLIGHT 22", OVERALL BED & RAM AREA 30" X 18" (RL X FB), DISTANCE BETWEEN POSTS 22" X 9" (RL X FB), USABLE BED AREA 22" X 18" (RL X FB), ELECTRIC HEATED PLATENS 18" X 18" (RL X FB) X 3" THICK, RAM ROD SIZE 3.25" DIA., CYLINDER SIZE 8" DIA. BORE, 4 COLUMN / POSTS SIZE 3" DIA. ...more
100 Ton, Wabash, 17" x15" (15" x15" steel plates), up-act, 5.5" -15.5" DL, Relay controls, #2331
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
MODEL 100-1515-SM. SERIAL #8912. SET UP WITH 15" X 15" X 1.25" STEEL PLATES EACH WITH 1" THICK INSULATION UNDERNEATH (NO HEATED PLATENS OR TEMP CONTROL). MAX CLEARANCE BETWEEN THE POSTS IS 18.5" L TO R X 9" F TO B – REDUCED BY APPROX 1.5" DUE TO NUTS UNDER CROWN*. OVERALL L TO R IS 28". CLAMP CYLINDER IS 10" ...more
100 Ton, Down-act., 36" x18", 2-pst, 36" daylight max.(two 19" DL) 32" stroke, self-contained, #878
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
GUNST MODEL GSP-900/2X500. SERIAL # 25176. NEW IN 1992. PRESS HAS A 4 \u00be" THICK CENTER PLATEN TO FACILITATE TWO DAYLIGHT OPENINGS OF UP TO APPROX. 19" EACH. CENTER PLATE CAN BE "BOLTED" DOWN TO FACILITATE A SINGLE OPENING OF UP TO APPROX. 36". MAX STROKE OF APPROX. 31.5". POST DIAMETER IS 5". PLATENS ARE ...more
100 Ton, Hydraulic Press #HPB-1010, hydraulic press, 2016
G-2000 | Toledo, OH
Category: Hydraulic Presses
Seller: G-2000
Location: Toledo, OH
Model: HPB-1010
Year: 2016
Model HPB-1010 Capacity 1000kn Pressure 30mpa Travel 250+405mm Table size 460x980mm Dimension 1730x730x2250mm+730x630x960mm Weight 1420kgs, Machine Type.Presses, Hydraulic Manufacturer.N/A Model.HPB-1010 Year.2016 Condition.Used.
100 Ton, Up-acting press, 4-post, 8" stroke, 16"-21" adj daylight, 22" x18", 30" x9" platen, #17
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
PLATEN L TO R OVERALL IS 30" AND F TO B BETWEEN POSTS IS 9". 9" DOUBLE-ACTING MAIN RAM WITH A 4" ROD. 3" DIAMETER POSTS. DAYLIGHT IS ADJUSTABLE FROM 16" TO 21". APPROX 8" STROKE. 40 \u00bd" OPERATOR HEIGHT. FULLY GUIDED. SOLENOID OPERATED DIRECTIONAL VALVE, PRESSURE REDUCING VALVE AND PILOT OPERATED CHECK VALVE. ...more
100 Ton, Up-acting press, 4-post, 12" stroke, 15" daylight, 10" ram, Reklay Control, 24" x20", #1863
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
10" DIAMETER RAM WITH APPROX 12" STROKE. MAX DAYLIGHT OF APPROX 15". OPERATOR HEIGHT IS APPROX 38.25" (CAN BE LOWERED 6" WITH REMOVAL OF FABRICATED BASE). FULLY GUIDED ON 3" DIAMETER POSTS WITH 6" BUSHINGS. RELAY CONTROL PANEL INCLUDES: CLOSE BUTTONS, OPEN, ON/OFF AND E-STOP. APPROX OVERALL DIMENSIONS: 46" X 32" X 64" ...more
100 Ton, 95" x 62", down-acting, 4-post, 36" daylight, 20" stroke, 35" operator height, 25 HP, #1903
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
97.5" L TO R BETWEEN THE POSTS (BUSHINGS ON MOVING BOLSTER REDUCE L TO R CLEARANCE TO 95"); 46" F TO B BETWEEN THE POSTS AND 43" BETWEEN THE BUSHINGS. OVERALL BED SIZE L TO R IS 136". APPROX 38" F TO B BETWEEN "FRAMES". NOMINAL BED SIZE IS 95" X 62". MAX DAYLIGHT IS APPROX 36". TWO CYLINDERS APPROX 8" BORE, 4" DIA ROD ...more
100 Ton, Up-act. 4-post, 14" x18", 16" stroke, 27" daylight, 10" ram, pushback cyls, 96" tall, #550
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
NOMINAL PLATEN SIZE 14" L to R X 18" F to B. DISTANCE BETWEEN POSTS: 16" L to R X 11" F to B. 10" SINGLE ACTING MAIN RAM RATED TO 2500 PSI. 1" NPT PORT. APPROX 16" STROKE. 27" DAYLIGHT. 2 \u00bd" POST DIAMETER. FULLY GUIDED MOVING BOLSTER WITH 3 \u00bc" LONG BUSHINGS. PUSH BACK CYLINDERS: SINGLE ACTING 2" BORE, APPROX ...more
100 Ton, Down-act., 99" x 48", 1000 psi, 36" stroke, 52" daylight, (4) 8" bore cyls, 34" W.H., #59
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
(100 TONS AT 1000 PSI). FOUR 8" BORE CYLINDERS. APPROX. DAYLIGHT OF 52" WITH APPROX. STROKE OF 36". TWO 4" BORE PUSH-BACK CYLINDERS. 34" OPERATOR HEIGHT. OVERALL HEIGHT IS 14' (10' WITH CYLINDERS REMOVED FOR SHIPPING). RACK AND PINION GUIDING. (ITEM #59).
100 Ton, electromagnetic chuck press
Vander Ziel Machinery Sales | Alto, MI
Category: Hydraulic Presses
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
EMC 100 ton Press, Asset # 17222.
110 Ton, Amada #TF110-EX, press, 6" stroke, 20" Shut Height, 4" ram adj., 35-65 SPM, #72665
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Amada
Model: TF110-EX
SERIAL. 750-00097, MODEL. TF110-EX, CAPACITY. 110 TON (METRIC), AREA OF BED. 43" X 27", AREA OF RAM. 23" X 19", STROKE. 6", SHUT HEIGHT. 20", RAM ADJUSTMENT. 4", THICKNESS OF BOLSTER. 5", SPEED. 35-65 SPM.
110 Ton, Edwards #HAT9000, shop press, 12-1/4" stroke, 37-7/16" x 48" table, new
Lenmark Industries | Langley, BC
Category: Hydraulic Presses
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: HAT9000
SKU: 129359, Model: HAT9000, Condition: New, Tons: 110 ton, Electrical :, Stroke: 12-1/4", Dimensions: 88.00 (H) x 64.00 (W) x 48.00 (L) inches, Additional :, Stock Number: ED9-HAT9000, Minimum Ram Speed (In./Sec):.186, Minimum Return Speed (In./Sec):.220, Model Number: HAT9000, Rating (Tons): 110, Steel Frame ...more
110 Ton, Edwards #HAT9020, shop press & portable power unit, 12-1/4" stroke, 37-7/16" x 48" table, new
Lenmark Industries | Langley, BC
Category: Hydraulic Presses
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: HAT9020
SKU: 129361, Model: HAT9020, Condition: New, Tons: 110 ton, Electrical :, Stroke: 12-1/4", Voltage: 230 volts, Phase: 3-phase, Dimensions: 88.00 (H) x 64.00 (W) x 48.00 (L) inches, Additional :, *Other voltage, - 460 volt, 3-phase - $ 32,104.62, - 230 volt, 1-phase - $ 32,723.06, Stock Number:ED9-HAT9020, Minimum ...more
110 Ton, Edwards #HAT9050, shop press with PLC, 12-1/4" stroke, 37-7/16" x 48" table, new
Lenmark Industries | Langley, BC
Category: Hydraulic Presses
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: HAT9050
SKU: 129357, Model: HAT9050, Condition: New, Tons: 110 ton, Electrical :, Stroke: 12-1/4, Dimensions: 88.00 (H) x 64.00 (W) x 48.00 (L) inches, Additional :, Stock Number: ED9-HAT9050, Minimum Ram Speed (In./Sec):.186, Minimum Return Speed (In./Sec):.220, Rating (Tons): 110, Steel Frame Thickness (In.): 3/4" ...more
110 Ton, Edwards #HAT9080, shop press with PLC & portable power unit, 12-1/4" stroke, new
Lenmark Industries | Langley, BC
Category: Hydraulic Presses
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: HAT9080
SKU: 129356, Model: HAT9080, Condition: New, Tons: 110 ton, Electrical :, Stroke: 12-1/4, Voltage: 460 volts, Phase: 3-phase, Dimensions: 88.00 (H) x 64.00 (W) x 48.00 (L) inches, Additional :, **Other voltage, - 230 volt, 1-phase - $ 38,247.80, - 230 volt, 3-phase - $ 38,495.17, Stock Number: ED9-HAT9080, Minimum Ram ...more
110 Ton, Pacific #110-PF-OBS, hydraulic press, 8.2" stroke
G-2000 | Toledo, OH
Category: Hydraulic Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Pacific
Model: 110-PF-OBS
STROKE.: 8.25", BED DEPTH (F-B).: 26.5", BED WIDTH (L-R).: 41.5", MODEL NO.: 110 PF-OBS, SERIAL NO.: 9399, MAX CAPACITY.: 110 TONS, PUNCHING CAPACITY.:, MAX RAM DIE WT.:.5 TONS, HYDRAULIC.:, DRAWING NO.: 54457-300, RELIEF SETTINGS.: 2320/850 PSI, DRAWING NO.: 54456-400, SUPPLY.: 230V, PHASE.: 3, HERTZ.: 60 HZ, Machine ...more
110 Ton, Reis #TUS-130, Fitting Press, 67" Stroke, 53.5" x 35.4" Clamping Platen, 2004
Revelation Machinery | Chicago, IL
Category: Hydraulic Presses
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Reis
Model: TUS-130
Year: 2004
Make: Reis, Model: TUS-130, Year: 2004, Machine Location: Upon Request, Tonnage 112 ton, Stroke 67″, Clamping Platen Area, 53.5″ (Front-Back) x 35.4″ (Left-Right), Catalog Retraction Force 45.9 Ton, Swing Down Ram 180 Degrees, Overall Height 221″.
110 Ton, Waterbury-Farrel #110-S, Hydraulic Press, High Speed, 6" stroke, 28" x 22" bed, 8" x 8" opening
National Machinery Exchange | Newark, NJ
Category: Hydraulic Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Waterbury-Farrel
Model: 110-S
CAPACITY. 110 TON, STROKE. 6", BED AREA. (L-R x F-B). 28" x 22", RAM AREA. (L-R x F-B). 24" x 16", BOLSTER. (L-R x F-B x THICK). 28" x 22" x 3" THICK (TEE-SLOTTED), SIDE FRAME OPENING. 8" x 8", WIDTH BETWEEN UPRIGHTS. 29-3/4", DIAMETER CYLINDER. 12", TEE-SLOTTED RAM (GUIDED), PRESSURE DAMPING CONTROL, PUNCHHOLDER IN ...more
