16 Results
3 Ton, Wabash, 4 post down acting, 21" daylight, 12" stroke, 10" x 16" table, Control panel & SLC150, 7.5 HP
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
2.5" DIA. RAM APPROX. 12" STROKE, APPROX. 21" DAYLIGHT. BED 16" L TO R X 10" F TO B 2" DIA. TIE RODS, WORKING HEIGHT APPROX. 40", OVERALL HEIGHT 8". COMPLETE WITH CONTROL PANEL WITH SLC 150, T-CAT, AND HEATER CONTROLS. 7.5 HP MOTOR VICKERS HYDRAULIC PUMP AND VALVES, PNEUMATIC SAFETY GATES. ( ITEM #30).
12 Ton, Wabash #12-1212-2TM, up-acting, 4-post, 12" x 12" platen,, 6" stroke, 6"-12" DL, #2567
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
Model: 12-1212-2TM
MODEL 12-1212-2TM. SERIAL #9019. SET UP WITH 12" X 12" X 3" ELECTRICALLY HEATED PLATENS. NOMINAL BED SIZE IF PLATENS ARE REMOVED IS APPROX 15" X 15". DAYLIGHT IS ADJUSTABLE FROM APPROX 6" TO 12". CLAMP CYLINDER: 5" BORE WITH APPROX 6" MAX STROKE. FULLY GUIDED ON 1.25" DIA POSTS WITH 3" BUSHINGS. APPROX 44.5" OPERATOR ...more
12 Ton, Wabash, 10" x7", up-act bench top, new air pump, 2.5" -11.5" DL, 6" stroke, #1577
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
MODEL #12-10S. SERIAL #2707. 10" L TO R X 7" F TO B NOMINAL PLATEN SIZE. CLEARANCE L TO R BETWEEN THE POSTS IS 11.25". CYLINDER IS 2" BORE WITH 6" STROKE. 1.25 THICK STEEL PLATE AND 1" THICK INSULATION BOARD ATTACHED TO CROWN AND SLIDE. TWO 1.25" DIAMETER TIE RODS. ADJUSTABLE DAYLIGHT FROM APPROX 2.5" TO 11.5" (ADD ...more
12 Ton, Wabash, 12" x12", up-act, steam/oil pltns, 4" -13" DL, 6" stroke, self-cont., #1530
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
MODEL 12-12-STMBAC. SERIAL #5947. CLEARANCE BETWEEN POSTS IS 13.75" L TO R AND 7.75" F TO B. TWO 12" X 12" X 1.25" STEAM/OIL PLATENS WITH 1" INSULATION UNDER EACH PLATEN. ADJUSTABLE DAYLIGHT FROM 4" TO 13" (IF PLATENS ARE REMOVED IT WOULD BE 8.25" TO 17.25"). CYLINDER IS 4" BORE, 1.75" ROD AND 6" STROKE. FULLY GUIDED ...more
12 Ton, Wabash, 12" x 12", hand-pump, bench top, 11" daylight, 6" stroke, 4-post, #1538
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
MODEL 12-12-2T. SERIAL #235. ADJUSTABLE DAYLIGHT OF APPROX 2.25" TO 11.25". CYLINDER IS 2" BORE WITH 6" STROKE. GUIDED ON 1.25" DIAMETER POSTS. CLEARANCE BETWEEN THE POSTS IS 13.75" L TO R X 7.75" F TO B (13" X 6.75" BETWEEN THE NUTS). OVERALL DIMENSIONS: 19" X 19" X 43" TOTAL. APPROX 350 LBS. (ITEM #1538).
Get email updates for newly added Hydraulic Presses
Hydraulic Presses (also known as hydraulic molding presses or hydraulic stampers) are machines that use hydraulic force to apply pressure for shaping, forming, or compressing materials. Commonly used in industries like automotive, metalworking, and manufacturing, they are ideal for tasks such as metal stamping, plastic molding, and rubber pressing. Hydraulic presses are essential for producing high-quality parts with precise force and control in heavy-duty applications.
20 Ton, Wabash, hot press w/opt 5 ton cold press, (2) 2.75" htd daylight, (1) cooled 9" daylight, #2283
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
MODEL MIL20-1818-4TM. SERIAL #7899. HOT PRESS IS SET-UP WITH FOUR 18" X 18" ELECTRICALLY HEATED (OPTIONAL WATER COOLING) PLATENS RESULTING IN TWO DAYLIGHT OPENINGS (TWO CENTER PLATENS MOUNTED TO A GUIDED CARRIER PLATE). ONE DAYLIGHT IS APPROX 2.5" AND THE OTHER APPROX 3". SIX STRIP HEATERS PER PLATEN; 750 WATT; 240 ...more
30 Ton, Wabash #30-1212-4STMBX, 4-Post Hydraulic Lab Press, 12" x 12" steam heated/water cooled platens, adjustable daylight
Soberay & Sons Ltd | Cleveland, OH
Category: Hydraulic Presses
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Wabash
Model: 30-1212-4STMBX
Item 3028 One (1) Used Wabash Hydraulic Lab Press, model 30-1212-4STMBX, 12" x 12" platens, 30 Ton, steam heated / water cooled, individual controls, adjustable daylight, self-contained hydraulic unit, 4-post type, self contained hydraulic unit.
30 Ton, Wabash #G30H-15-B, 15" x15" electric platens, 6" stroke, 5" -12" daylight, 2 HP hydraulic system, #2691
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
Model: G30H-15-B
Model G30H-15-B. Serial #9746. 15" x 15" electric platens: six heaters per platen (1/2" dia x 15"; 230 volt; 900 watt; 5400 watts per platen; rated to 800 F). Clamp cylinder is 5" bore with 6" max stroke and a 2" diameter rod. Daylight is adjustable from approx. 5" to 12" (set at 7"). Approx 41" operator height ( 38" ...more
50 Ton, Wabash #50-2418-2TMACX, 4-post hydraulic press with electric heating elements, up-acting
Ingalls Process Equipment | Painesville, OH
Category: Hydraulic Presses
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Wabash
Model: 50-2418-2TMACX
One (1) used 50 ton Wabash Hydraulic 4 post press Model: 50-2418-2 TMACX Serial number: 7168 electrically heated die cabinet style control panel Dual palm buttons, up-acting 50 ton 230V, 3 phase, 60 Hz 3 HP unitized hydraulic unit and attached control panel Four posts inside dimensions: 27" wide x 12" deep ...more
50 Ton, Wabash #PC50-2418-4TM, Platen Press, 24 x 18 Electric Heated, 9600 watts
Revelation Machinery | Chicago, IL
Category: Hydraulic Presses
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Wabash
Model: PC50-2418-4TM
Year: 1900
Make: Wabash, Model: PC50-2418-4TM, Year: 1900, Machine Location: California, -Compression Tonnage: 50 Tons, -Compression Cyl.: 7×7, -Platens: 24″ x 18″ Electric Heated, 9600 watts, -Motor HP: 3 HP, -Electrical Requirements: 440V, 3P, 60Hz.
50 Ton, Wabash, 34" x 31" up-acting, 4-post, 50" daylight, 24" stroke, hydraulic unit, no controls, #877
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
S/N 7860. MODEL PC50-3030-9CTMX. NEW IN 1986. 41" L TO R OVERALL; 22 \u00bd" F TO B BETWEEN THE POSTS. 34" L TO R X 31" F TO B NOMINAL BED SIZE. FULLY GUIDED ON 2" DIAMETER POSTS. TWO DOUBLE-ACTING CYLINDERS: 5" BORE; 2" ROD; 24" STROKE. APPROX. DAYLIGHT OF 50". WORK HEIGHT OF 41". HYDRAULIC UNIT BEHIND PRESS ON SAME ...more
75 Ton, Wabash, 24" x 18", multiple daylight, 3 hot/3 cold, self-cntnd, 12" stroke, #1333
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
MODEL PC75-2418-4WC. SERIAL #7564. PRESS IS SET UP WITH 3 "HOT" DAYLIGHTS AND 3 "COLD" DAYLIGHTS. EACH DAYLIGHT OPENING IS APPROX 2". FOUR 24" X 18" X 1.75" ELECTRICALLY HEATED PLATENS AND FOUR WATER-COOLED PLATES. EACH HEATED PLATEN HAS TEN CARTRIDGE HEATERS THAT ARE.5" DIAMETER X 18.25" LONG AND 240 VOLTS. HEATERS ...more
100 Ton, Wabash #100-18-2TMBAC, 4 post hydraulic press, 7" stroke, 18" x 18" heated platens
Alma Machinery Co-Ann Arbor MI | Ann Arbor, MI
Category: Hydraulic Presses
Seller: Alma Machinery Co-Ann Arbor MI
Location: Jackson, MI
Mfr: Wabash
Model: 100-18-2TMBAC
Year: 2012
CAPACITY 100 TONS, STROKE 7", MAX. DAYLIGHT 22", OVERALL BED & RAM AREA 30" X 18" (RL X FB), DISTANCE BETWEEN POSTS 22" X 9" (RL X FB), USABLE BED AREA 22" X 18" (RL X FB), ELECTRIC HEATED PLATENS 18" X 18" (RL X FB) X 3" THICK, RAM ROD SIZE 3.25" DIA., CYLINDER SIZE 8" DIA. BORE, 4 COLUMN / POSTS SIZE 3" DIA. ...more
100 Ton, Wabash, 17" x15" (15" x15" steel plates), up-act, 5.5" -15.5" DL, Relay controls, #2331
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
MODEL 100-1515-SM. SERIAL #8912. SET UP WITH 15" X 15" X 1.25" STEEL PLATES EACH WITH 1" THICK INSULATION UNDERNEATH (NO HEATED PLATENS OR TEMP CONTROL). MAX CLEARANCE BETWEEN THE POSTS IS 18.5" L TO R X 9" F TO B – REDUCED BY APPROX 1.5" DUE TO NUTS UNDER CROWN*. OVERALL L TO R IS 28". CLAMP CYLINDER IS 10" ...more
300 Ton, Wabash, up-acting 4-post hydraulic press, 45" x 25" bed, 14" stroke, 24" daylight
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Wabash
NOMINAL BED IS APPROX 45" L TO R X 25" F TO B. OVERALL L TO R IS APPROX 57.5" AND F TO B BETWEEN THE POSTS IS APPROX 11.5" (DISTANCE BETWEEN THE NUTS IS 42.5" L TO R X 8" F TO B)*. CLAMP CYLINDER IS A DOUBLE-ACTING 3000 PSI HANNA WITH A 16" BORE; 10" DIAMETER ROD AND 14" MAX STROKE. TWO 1.5" FOUR-BOLT PORTS. THE END ...more
600 Ton, Wabash #600-1818-SMX, hydraulic press, 6" stroke, 58" x 38" bed, Allen Bradley controls, low profile (6' 4" )
Alma Machinery Co-Ann Arbor MI | Ann Arbor, MI
Category: Hydraulic Presses
Seller: Alma Machinery Co-Ann Arbor MI
Location: Jackson, MI
Mfr: Wabash
Model: 600-1818-SMX
Year: 1992
Manufacturer: Wabash, Model: Wabash 600-1818-SMX Press, Condition: Very Good, Location: Jackson, MI Cooper Building, Year: Year Unknown, Machine #: 6022, CAPACITY 600 TONS AT 2650 PSI, STROKE 6, DAYLIGHT 10.5, OVERALL BED & RAM AREA 58 X 38 (RL X FB), DISTANCE BETWEEN POSTS 41.5 X 17 (RL X FB), PLATENS 18 X 18 (RL ...more
