Buy or Sell Your Vertical Lathe

84 Inch Cincinnati Hypro Vertical Boring Mill, Model 7, Max Swing 91 Inches, 30 HP, 72 Inches Under the Rail, Two Ram Heads, Side Head, 4 Jaw Chuck, No Pit Required, $99,500.00 Loaded Out, Tom Hale Equipment Company, Inc., Best source of Vertical Boring Mills, Since 1981, Crossville, Tennessee Tom Hale - President ...more

Table Diameter: 55.11", Maximum Swing: 62.99", Maximum Part Height: 47.24", Ram Cross Section: 9.44" x 9.44", Ram Stroke: 35.4", Table Speed, 2-Ranges: 1-360 RPM, Table Motor: 60 HP/50 HP, Table Weight Capacity: 17,600 Lbs, Milling Spindle Taper: BT 50, Milling Spindle Speeds, Max: 1500 RPM, Milling Spindle Motor: 20 ...more

Table diameter: 168″ (14’), Maximum Swing: 180″ (15’), Height under a 10″ tall tool: 120″ (10’), Diameter of bore both rams will enter: 40″, Table capacity: 75 Tons, Maximum table speed: 50 RPM, Rams: 2, Ram stroke: 80″, Ram cross section: 11.3″ X ...more

Yama Seiki GV2000M Vertical Turning Center with Milling, TABLE DIAMETER: 2,000 MM (78.7 INCH), HEAVY DUTY MANUAL INDEPENDENT 4 HARD JAWS, MAX. SWING DIAMETER: 2,050 MM (80.7 INCH), MAX. TURNING DIAMETER: 2,000 MM (78.7 INCH), MAX. TURNING HEIGHT: 1,280 MM (50.3 INCH), RAM STROKE (Z AXIS): 900MM (35.5 INCH), CROSS RAIL ...more

STOCK NO. ET-5100, Giddings & Lewis Model 84VTC 96″ 2-Axis CNC Vertical Boring Mill, New: 2001, Make: Giddings & Lewis, Model: 84VTC, Table Diameter: 96″, Swing: 108″, Table speeds up to 200 RPM, Elevating Rail, Max under the rail: 90″, Ram Stroke: 57″, Ram Size: 8″ X ...more

*Re-machine the turret saddle, *Re-grind the turret slide, *Re-scrape and refit all surfaces, Rescrape and refit all gibs., *Re-flake all surfaces., *Re-fit with Phonelic material., We thank you for the opportunity to quote the following!, Webster & Bennet 72” vertical turret lathe rail and turret assembly. ...more

74" BULLARD CUTMASTER VERTICAL BORING MILL, New 1948, Motor Driven with 40 HP, 3-Phase, 60 Cycle, AC Motor & Controls, Ram Head, 5-Position Turret Head, 74" 4-Jaw Face Plate, Long Cylinder Ram Head with 41" Stroke, Diameter of Table 74", Max. Swing 82", Height Under Rail 62", Cross Rail Vertical Travel 48" ...more

CAPACITY: Table Diameter 141.73" Maximum Turning Diameter 275.62" Maximum Turning Height 114.17" Maximun Height under Rail 118.11" Table Weight Capacity 100,000 lbs. Vertical Ram Travel, Z-Axis 59.05" Horizontal Travel Of Ram, X-Axis 100.37" Table Speeds Range.55-40 RPM Table Speeds 16 Steps Feed Range Vertical Ram ...more

MOTCH 135, Manufacturer: Motch, Model No.: 135, Chuck: 30” 3-Jaw, Horsepower: 50 HP, Distance Under Turret: 40” / 16”, Overall Machine Height: 150" (12'-6") approx., Axis Travels: Z = 24”, X = 28”, Turret: (1) 6 Station Turret, Control: Fanuc CNC, Axis Drives: Fanuc AC, Swing: 46” ...more

MIYANO OCEAN GN-3200 GANG TYPE CNC CHUCKER WITH ROBOTIC LOADING, Max. turning dia. (mm) 45, Max. turning length (mm) 50, Miyano, GN-3200, Efficient and space-saving, hand in hand with traditional precision., Designed for high-througput machining of small diameter workpieces, this machine has a wing type fixed spindle ...more

Stock Number: B620031, Bullard 46 Dyna-Au-Tape, Serial No. 33776, Age: 1980, Condition: Very Good, Retro - Fitted Fanuc 16 T, Retro Fit Completed 2006, Table Size 46", Maximum Swing 58", Maximum Height Under Rail 60", Maximum Height Under Ram Face 68", Ram Stroke 60", Table Speeds Low 0 To 100 Rpm's, Table Speeds ...more

CAPACITY:, Table Diameter: 177.16", Maximum Swing: 216.53", Maximum Turning Height: 157.48", Ram Dimensions: 15.74" x 15.74", Taper in Ram: BT-50, Table Speeds, 2-Range: 1 - 60 RPM, Table Weight Capacity: 110,000 Lbs, Z-Axis Travel, Ram Stroke: 78.74", X-Axis Travel, Cross Travel: 111.81", W-Axis Travel, Rail ...more

For sale is a New O-M RT-915 CNC Vertical Lathe. This powerful Japanese Manufactured machine has a table diameter of 36.02" and supports a max. workpiece mass of 3300lbs. The operational capacity includes a max. swing of 43.31" and a max. turning diameter of 39.37". The machine utilizes a FANUC 0i-TF PLUS CONTROL ...more

Emco VT-250 Inverted Vertical Lathe; 10" Chuck, 4K RPM, 10" Swing; A2-6 Spindle, 12 Station, VDI40 Tool Holder, 4K RPM Tool Speed, Siemens Ctrl, Excellent Condition, 2 Available!, Emco VT250 Inverted Vertical Turret Lathe, New: 2012, Travels:, X-Axis: 20.9", Z-Axis: 12.2", Y-Axis: +/- 3.5", Max Workpiece Dia: 7.87" ...more

Overview, Type:MACHINE PARTSManufacturer:WEBSTER & BENNETTModel:DH SERIES II ManualStock #:11765Status:For Sale.

Manufacturer Giddings & Lewis Model number 513-VBM Year of manufacture 2025 3 Jaw hydraulic chuck 60” Max turning diameter 72” Height under tool 72” Spindle motor 75 HP AC VARIABLE SPEED Spindle speeds 10-272 RPM Number of tools 5 Programable axis X 40” LEFT OF CL / 40” RIGHT OF CL / ...more

DMTC, DALIAN DAHUI MACHINE TOOL CO., LTD MODEL CGK5112ID, CNC VERTICAL BORING MILL S/N: B12 13739 0, Manual Chuck: Diameter 1000 mm, Max swing diameter of workpiece: 1200 mm, Max Machining Diameter: 1200 mm, Max Machining Height: 1000 mm, Max Workpiece Weight: Kg 5000, Worktable Speed Step Two Gears Stepless ZF 7 ...more

CAPACITY:, Maximum Swing: 50.0", Maximum Cutting Diameter: 43.3", Maximum Cutting Height: 39.37", Spindle Motor: 75 HP, Spindle Speeds: 5-850 RPM, Live Spindle Speeds: 3,000 RPM, Live Spindle Motor: 15 HP, X-Axis Travel: 22.83", Z-Axis Travel: 39.37", Rapid Traverse, X,Z Axes: 787 IPM, Maximum Feed ...more

46" BULLARD CUTMASTER VERTICAL BORING MILL, PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $34,500.00, HMC Stock # 20095-P, Machine Serial No.: 30002, Machine Model No.: 75 Cutmaster, New Date: 1956, (1) 5-Position Turret Head on Rail, (1) Side Head, Power Indexing & Manual ...more

Overview, Type:MACHINE PARTSManufacturer:WEBSTER & BENNETTModel:DH ManualStock #:11740Status:For Sale.

SUMMIT SC2000 Vertical Boring Mill, SUMMIT SC2000, Technical, Power 89 hp, RPM 140 RPM, Swing 82.67, Table Dia 78.74, Work Ht-U/R 59.05, the Following s, Newall Topaz 2-Axis Digital Readout, Full Pendant Controls, Hydraulic Tracer, Left Hand Ram, 5-Position Right Hand Turret, 89 HP Main Drive Motor, NOTE:, Inspect in ...more

Serial Number 514-0046-98, Table Diameter 72" Maximum Turning Diameter 84" Maximum Height Under Cross Rail 96" Ram Stroke, Z-Axis 62" Vertical Travel of Cross Rail 54" Ram Travel, Left of Center 54.5" Ram Travel, Right of Center 48.5" Ram Cross Section 7.875" Table Speeds, Inf. Variable 2 Ranges Table Speeds, High ...more

Table Diameter: 49.21", Maximum Part Swing: 62.99", Maximum Cutting Height: 55.11", Table Speed: 1 - 360 RPM, Table Weight Capacity: 8 Ton, Cross Rail Travel: 27.55", Ram Stroke: 35.43", Milling Spindle Speed: 3,000 RPM, C-Axis Rotation:.001, Ram Cross Section: 8.66" x 8.66", Fanuc 32i-A CNC Control, Ram with 24 ...more

MODEL.: PMNX-1600, MAX TURNING DIAMETER.: 39.370", MAX SWING OVER BED.: 42", MAX CUTTING LENGTH.: 62", SPINDLE BORE.: 12.500", SPINDLE MOTOR.: 60 HP, SPINDLE SPEED.: 500, CHUCK SIZE.: 48", X AXIS TRAVEL.: 22.50", Z AXIS TRAVEL.: 44.88", JORGENSEN CHIP CONVEYOR, Machine Type.Lathes, Chucking, Cnc Manufacturer.MAZAK ...more

Table Diameter: 90.55", Max. Swing: 95", Ram Stroke: 56", Height Under Crossrail: 70", Height Under the Ram: 63", Swivel of Ram: 30/ 45 Degrees, Table Speeds: 12 - 36 RPM, Feed Rates: 0.0098 - 0.4724 IPM, Floor Space: 240" x 144", Dimensions: 162" x 228" x 172", Weight (Approx.): 45,000 lbs, Push Button Controls on ...more

Manufacturer:BULLARD, Model:54 SPIRAL DRIVE, Condition:Used - Good, Year:1945, Stock #:B600634, Status:For Sale, Serial #:24544, 54" Used Bullard Vertical Turret Lathe, Table Dia 50", Swing 56", Work Ht-U/R 39", Power 25 hp, RPM 60 RPM, Dimensions R-L 120" X F-B 9'6" X 120" High, Weight 24,000 Lbs., Table Size 50" ...more

Maximum Turning Length: 9"Maximum Turning Diameter: 11"Spindle Speeds: 3,500 RPMTurrets: (2) 12-Position, Fanuc 18i-TBDual Parallel Spindles(2) 10" 3-Jaw Chucks16 Pos. Gantry Load Stations (12" High Max.)Gantry UnloadChip ConveyorCoolant.

Maximum Swing: 35", Max Turning Diameter: 31.5", Maximum Turning Length: 31.5", Table Diameter: 18", X-Axis Travel: 17.3", Z-Axis Stroke: 31.9", Spindle Speeds: 2-2000 RPM, Spindle Motor: 40 HP / 29 HP, Spindle Nose: A2-11 (ISO), Milling Spindle Speeds: 3000 RPM, Milling Spindle Motor: 10 HP / 7 HP, C-Axis:.001 ...more

CHUCK DIAMETER: 24", MAX WEIGHT: 1100 LBS., MAX SWING DIAMETER: 31", MAX TURNING DIAMETER: 23.5", X STROKE: 30", Z STROKE: 19", MAIN DRIVE:, POWER: 100 HP, FULL POWER AT 800 RPM, MAX SPINDLE RPM: 2,000, C AXIS POSITIONIONG TO.01MM ANGULAR DEGREES, FEED DRIVE:, RAPIDS Z / Z: 60 / 30 M / MIN., FEED FORCE X / Z 4 / 15 ...more

Table Diameter, T-Slotted: 108", Maximum Swing: 120", Maximum Height Under Cross Rail: 84", Ram Stroke, 12" Extended Travel: 62", Ram Taper: #60 ANSI, Ram Cross Section: 7.875" x 7.875", Side Head Horizontal Ram Travel: 32", Side Head Ram Taper: #50 ANSI, Side Head Ram Cross Section: 7.25" x 8.50", Table Speeds ...more

STOCK NO. 9605, 36" WEBSTER & BENNETT VERTICAL TURRET LATHE MODEL M, Serial No. 3189-12 New 1967, Table Diameter 36″, Maximum Swing 46″, Maximum Diameter Turned With Turret 37″, Maximum Height Under Face of Turret 37″, Height Under Cross Rail w/Adjustable Stop Bar 27 1/2″, Vertical ...more

Maximum Swing Over Bed Ways: 42” Maximum Turning Diameter: 39.37” Distance, Turret to Spindle Face: 62.99” Turret Positions: 8 X-Axis travel: 22.5” Z-Axis Travel: 44.88” Spindle Hole: 14-1/2” Spindle Speeds: Approx. to 500 RPM Main Motor: 30/45 KVA Under power : Mazak Fusion 640T ...more

CAPACITY:, Table Diameter: 78.74", Maximum Turning Diameter: 82.67", Maximum Height Under Rail: 59.05", Turret Stroke: 30", Ram Stroke: 36", Head Swivel: 35 Degrees, Table Speeds: 1.55-140 RPM, Feeds:.002-.199 IPR, Rapid Feed: 98 IPM, Newall Topaz 2-Axis Digital Readout, Full Pendant Controls, Hydraulic Tracer, Left ...more

Tested and works as it should. Serial No. L22L0056 Rated Current 50A Rated kVA 30 200/220V Year 2013-03-30 Has a Samchully Chuck 13B062 HS-10" 3500RPM Spindle Spindle Nose A2-8/- Tailstock Quill Diameter 80mm Bar Capacity 76 / - Swing Over Bed MAX 550mm Max Turning Length 490mm 200 x 550mm Travel.

MANUFACTURER.: GIDDINGS & LEWIS, MODEL.: VTC 3000 [CNC], YEAR.: 2009, TABLE TYPE.: ROHM, TABLE OUTER DIAMETER.: 118.11", MAX. RING OUTER DIAMETER.: 137.8", TABLE BEARING SYSTEM.: HD TAPER ROLLER THRUST, TABLE LOAD CAPACITY.: 132,277 LBS., LOW TABLE RPM RANGE.: 1–37, HIGH TABLE RPM RANGE.: 1–120 ...more

OSBORN NO. 3-A BRUSH MACHINE, Vertical/Horizontal Head Adjustment: 360 Degrees, Crossfeed Adjustment: 6", Vertical Adjustment: 6", Infeed Adjustment: 12", Workholder Height, Minimum: 35-1/2", Workholder Height, Maximum: 41-1/2", Height From Floor To Lathe Spindle Centerline: 39", Spindle Speeds: 1750 RPM, Motor HP: 5 ...more

STOCK 9990, 46" BULLARD "DYNATROL" HI-COLUMN VERTICAL TURRET LATHE, Serial No. 32949 New 1975, Capacity: Swing With Side Head Above Table 49", Swing With Side Head Below Table 58", Height Under Cross Rail 64", Height Under Turret Face 74-3/8", Vertical Travel of Turret Head 26" ...more

52", KING, No. 52, 1955, MAXIMUM SWING 60", 36" UNDER RAIL, 40 H.P., UNDER POWER, Capacity 52" 1,320.8 mm NEW: 1955, TABLE DIAMETER. 52", MAX. SWING. 60", MAX. HEIGHT UNDER RAIL. 36", MAIN MOTOR. 40 HP, RAM STROKE. 30", TURRET STROKE. 30", TABLE SPEEDS (16). 4.84 - 151 RPM, THREADING. 2 - 18 TPI, FEEDS (12). ...more

CINCINNATI 18C CINTURN, Manufacturer: Cincinnati - Milacron, Model Number: 18C Cinturn, Chuck: 18" 3-Jaw Hydraulic, Horsepower: 50 HP AC Variable Speed, Spindle Speed: Max. 1500 RPM, Axis Travel: 40"Z, 18"X, Turrets: (1) 6 Station ID Turret; (1) 6 Station OD Turret, Control: Fanuc, Axis Drives: Fanuc AC.

CAPACITY:, Max. Turning Diameter: 28.7", Max. Turning Height: 29.5", Spindle Speed Ranges (1): 20-2,000 RPM, Spindle Motor: 50 HP, X-Axis Travel (Ram): 15.4", Z-Axis Travel (Rail): 31", X-Axis Guideway Span: 15.2", Z-Axis Guideway Span: 24.8", Rapid Traverse (X-Axis): 472 IPM, Rapid Traverse (Z-Axis): 630 IPM, Max. ...more

REMEDY CNC GANG TOOL LATHE, PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $15,500.00, HMC Stock # 22218-P, Machine Serial No.: 100161, Machine Model No.: S25L, New Date: 2018, Maximum Machining Diameter: 1", Maximum Bar Capacity: 1", Maximum Turning Length: 4.7", Maximum Longitudinal ...more

8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER & BENNETT, 3 STEP, WILL FIT 36" VTL'S, MODEL. T39.40/1, QUANTITY. 4, JAW HEIGHT (G). 8", JAW WIDTH (X). 2 1/4", STEP 1 HEIGHT (F). 3", STEP 2 HEIGHT (F1). 2 1/2", STEP 3 HEIGHT (F2). 2 1/2", OVERALL LENGTH (D). 7 3/4", 3 STEP JAWS, EXCELLENT SERRATIONS / POSSIBLEY ...more

VDM 800 SVDM 1000 SVDM 1250 SVDM 1600 SVDM 2300 SVDM 2600 S Working Area Rotating diameter (max.) 31 in 39 in 49 in 63 in 91 in 102 in Turning diameter of upper tool holder 31 in 39 in 49 in 63 in 91 in 102 in Turning diameter of side tool holder 28 in 35 in 39 in 55 in 79 in 91 in Machining height (max.) 31 in 31 in ...more

CAPACITIES, SWING OVER BED: 10.63", SWING OVER CROSS SLIDE: 5.12", COLLET: 5C, HEADSTOCK, SPINDLE BORE: 1.25", MAXIMUM SPEED: 6,000 RPM, MAXIMUM RATING: 5 HP, COOLANT PUMP: ¼ HP, TRAVELS, X-AXIS: 15.75", Z-AXIS: 7.87", DIMENSIONS: 89.37"X 34.64" X 68.11", WEIGHT: 1,994 LBS ...more

Capacity  Chuck Size: 6”Max. Turning Length: 7.9”Max. Turning Diameter: 6”Travels  Cross Travel (X-Axis): 27.5Longitudinal Travel ( Z-Axis): 11.8”Traverse (Y-Axis): 7.9”Rapid Feed: 50 m/minMain Spindle  Spindle Nose (Flat Ø): 140Speed Range: 50-7000 RPMFull Power Speed ...more

Chuck: 6.5"X-Axis Travel; 3"Z-Axis Travel: 5.7"Number of Spindles: 2Spindle Nose: A2-5Spindle 1 Motor Power: 11.1 HP / 7.4 HPSpindle 2 Motor Power: 10 HP / 7.4 HPSpindle Motor Speeds: 50 - 4500 RPMNumber of Turrets: (2) 8-Position TurretsIndexing Time: 5 secondsRapid Feed X & Y-Axis: 945 IPMParts Loader  Work ...more