Buy or Sell Your Vertical Lathe

Spec Sheet:, 10" DIAM - 3 JAW CHUCK, USED, Lathe Chuck, Overall Diameter: 10, Through Hole: 3", Jaws: 3, Stamped Number: 1920.

, Vertex Super Spacer with 6-1/4" 3-Jaw Chuck available, used condition. Includes 1-1/2" center hole. Ideal for tooling applications. High-quality Vertex brand offering precision and reliability for your machining needs., Spec Sheet:, Vertex Super Spacer w/ 3 Jaw 6-1/4 Chuck, USED, BRAND: Vertex, TYPE Super Spacer ...more

Number of jaws.4, jaw length. 8", jaw width 8, top jaw dimensions.2 x 5.

SERIAL.110032111AC, DIAMETER OF CHUCK. 21", NUMBER OF JAWS. 4, HOLE DIAMETER. 5", BACKING. A.

Ideal for:, • Machining large oilfield tubular goods, Application/customer benefits • End machining of long pipes with upset ends • Rapid and clamping stroke for short clamping cycles • Full spindle bore can be used Technical s • Air chuck for external clamping with built-in pneumatic cylinder ...more

This is a USED 8" 3-Jaw self-centering lathe chuck with one-piece jaws and a D1-6 camlock back plate. You can identify the D1-6 camlock back by the six camlocks that are 7/8" in diameter. Chuck has a 2-1/4" I.D. hole diameter and chuck has no manufacturing brands listed on it. It is in very good condition and includes ...more

, Spindle Motor: 15HP, 240/480 volt, Range: 20" Diameter x 9" Vertical over Chuck, Chuck: 16" Diameter, Chuck Speeds: 15, 24, 41, 64 RPM, Grinding Wheel: TBD, Grinding Wheel Speed: 1200 RPM, Feeds:.003 -.070 IPM, Automatic lube systems, Floor Space: 5'3"L x 3'6"W x 6' 8-3/4"Max./5' 9-1/2"Min.H, Approx. ...more

Make: Dalmec, Model: MGC, Year: 2024, Machine Location: Upon Request, 900lb Capacity, Max working radius: 4000 mm, Max vertical lifting speed: 0,5 meters/second, Vertical lift: 2450 mm.

This is a USED 12" 3-Jaw self-centering universal lathe chuck with two sets of I.D. & O.D. jaws & has a flat back with a 4.110 center hole. That flat back has a 10-1/4" recessed deep flange on the back that is approximately 1/4" deep. Chuck jaws will close down to approximately 1/8", is in very good condition ...more

156" long x 60" wide x 80" high, (3) vertical pneumatic Clamping bars, (7) clamps that can be placed horizontal or vertical on perforated surface.

Swing Over Bed 20.125 inches Swing Over Cross Slide 11.875 inches Swing Over Gap 27.625 inches Gap Length 15 inches Hole Through Spindle 4.125 inches Threads Inch.125 60 (64) Threads Metric.5 120 mm ( 64 ) Diameter of 3-Jaw Chuck 12 inches Longitudinal Feeds Range.00145.44474 (124) Cross Feeds Range.0007.22237 (124) ...more

Poly Processing Vertical Tank - 200 Gallon. Made of polyethylene, the tank is clean and free of residue. Designed for vertical use. Serial number unavailable., Basis: FOB, Gallons: 200.

This listing is for a NEW ALOIS KUHN GmbH Gewindespindel, Drawing No. 5286., Threaded spindle manufactured by ALOIS KUHN GmbH in Freiberg, Germany. Dated June 26, 1991. Ideal for precision mechanical applications or replacement in legacy systems., See photos for., Part No: Zeichn. Nr. 5286, Type: Threaded Spindle ...more

SANYO SDN-SP3-320SB spindle available. Experience the reliability of SANYO with this used model, perfect for enhancing your equipment. Act now to secure this quality component for your operations., Spec Sheet, SANYO SDN-SP3-320SB, Dimensions. 20X5X5, Weight. 18LBS.

Ideal for:, • Machining large oilfield tubular goods, Chuck is fully service and operational pressure and grip force tested buy are quality service team ready to put in production mount and go no surprises and no issues why buy something you don’t know what you’re getting, Which will assure you ...more

This is a USED 6-1/4" 3-Jaw self-centering universal lathe chuck with two-piece jaws and a LOO threaded back plate. You can identify the LOO back by the 3-3/4" diameter and 6 threads per inch. Chuck has a 1-3/8" I.D. hole diameter and chuck has no manufacturing brands listed on it. It is in good condition and includes ...more

Stock #: 92469 Category: Vertical Motors HP: 150 RPM: 3575.00 Frame: L445VP24 Enclosure: TEFCBB EXP Make: Electric Volts: 575 Service Factor: 1.00 Condition: New Surplus Location: Toledo, OH.

This is a USED 6-1/4" 3-Jaw self-centering universal lathe chuck with two-piece jaws and a LOO threaded back plate. You can identify the LOO back by the 3-3/4" diameter and 6 threads per inch. Chuck has a 1-3/8" I.D. hole diameter and chuck has no manufacturing brands listed on it. It is in good condition and includes ...more

Max Swing Over Bed 1000mm/39.3" Max Swing Over Carriage 650mm/ 25.9" Max Swing Over Gap 1300mm/51.18" Length of Gap 450mm/ 17.7" Maximum Distance between Centers 6000mm/ 236" Main Spindle Bore 104mm/4.09" Spindle Nose A-11 Spindle Speeds 5.6-1120 RPM Main Motor 30KW/ 44 HP Metric Threads (154) 0.4-600 Module Threads ...more

Type:RollformingManufacturer:RAFTERModel:12 StandStock #:802871Status:For SaleSerial #:2884, 3" Vertical Adjustment, Variable Speed.

Stock #: Lagun-AT-2140/60/80/120-G-TWBrand: Republic LagunModel: AT-2140/60/80/120-G-TW, Swing Over Bed: 21″Swing Over Cross Slide: 14″Distance Between Centers: 40″/60″/80″/119″Spindle Speed RPM Range: 20-1,600 RPMHole Through Spindle: 3.09″Spindle Nose: D1-8Motor HP: 12.5 ...more

SERIAL. L-03-02, MODEL. 26-4 X 132, SWING OVER WAYS. 29", SWING OVER CROSS SLIDE. 18", DISTANCE BETWEEN CENTERS. 132", SWING IN GAP. 40", LENGTH OF GAP. 16", SPINDLE SPEEDS. 14 TO 1010 RPM, THREAD ENGLISH. 1/2 TO 56 TPI, FEEDS.0014" TO.1164" PER REVOLUTION, THREAD METRIC.50 TO 56 MM, THREAD MODULE.25 TO 14, DIAMETER ...more

, BTC 8" Self-Centering Manual Lathe Chuck. Used 3 Jaw Chuck with D1-6 Mount. s an overall diameter of 8" and a 2-1/4" center hole ID. Ships in a 12"x12"x12" box, weighing 65lbs. Ideal for precision work., Spec Sheet:, BTC 8" Self-Centering Manual Lathe Chuck, 3 Jaw w/ D1-6 Mount, USED, Brand: BTC, 3 Jaw Chuck ...more

For sale: A 100 bbl internally coated tank mounted on a skid, accompanied by a 500-gallon chemical tank also mounted on a skid. This package s inlet and outlet control valves, designed for three-phase service with a maximum temperature of 130°F and pressure of 1440 psi. The unit is in good condition (PASC ...more

SERIAL. 0440882MODEL. [Not Specified]SWING OVER WAY. 33-1/2CENTERS. 260SWING OVER CROSS SLIDE. 23CHUCK. 31-1/2 4-JAW AND 24 3-JAWSPINDLE HOLE DIAMETER. 3-1/4SPINDLE SPEEDS. 6.9 TO 900 RPMENGLISH FEED.0022 TO.0591 IN/REVENGLISH THREAD. 1/8 TO 56 TPIMETRIC THREAD. 0.5 TO 122 MM PITCHTHREAD DIAL. YESSTEADY REST. 12 AND ...more

Nardini ‘Mascote’ 16″ x 40″ Engine Lathe, MS-1640, Inventory # 10008, Model: MS-1640 ‘Mascote’, S/N: D5JFL141, *Please Note: Lathe runs as it should. DRO works, but X-axis scale is damaged, and it errors (as shown in the photos & video). There are no replacement parts readily ...more

Howa 12″ 3-Jaw Hydraulic Chuck, 2.8″ Thru Hole, Howa 10″ 3-Jaw Hydraulic Chuck, 2.9″ Thru Hole.

Cushman 4-jaw power wrench chuck, S/N 9119728202A-1, 1-2, O.D. 28", I.D. 10", Power Wrench 4 jaw scroll w/ independent jaws, Chuck Spindle Nose Mount: A2-15.

Spec Sheet:, 10in Pratt Chuck 4 Jaws, USED, Brand: Pratt, Chuck, Stamped Number: LE941, Jaws: 4, Center Hole: 2, Overall Diameter: 10, Comes with Chuck Key.

SERIAL. 4010W1159WMODEL. 1440W-3STOCK #. 321840YEAR NEW.SWING OVER WAYS. 14"SWING OVER CROSS SLIDE. 7-1/8"SWING IN GAP.DISTANCE BETWEEN CENTERS. 40"SPINDLE SPEEDS. (12) 40 TO 1800 RPMFEEDS ENGLISH.0015 TO.0913 IPRTHREAD ENGLISH. (28) 1-7/16" TO 80 TPIMETRIC PITCHES. 1 TO 20 MMSPINDLE HOLE. 2-1/4"STEADY REST 3 POINT. ...more

This is a USED & Imported 10" Easy-Set 6-Jaw adjustable type lathe chuck with two-piece jaws & a D1-5 back plate. That D1-5 back can be identified by the 6 camlocks that are 3/4" in diameter. It has a 2.840" center hole & with that adjustable you can dial the accuracy right in! Includes the chuck wrench ...more

, Bison 8" 3 Jaw Universal Scroll Chuck, used, with overall diameter of 8" and center hole of 2-1/8". Suitable for tooling and lathe chucks, featuring max RPM of 2500. Ideal for precision applications., Spec Sheet:, Bison 8" - 3 Jaw Universal Scroll Chuck, USED, Brand: Bison, 3 Jaws, Scroll Chuck, Overall Diameter: 8 ...more

Cushman 8 1/4″ 3-Jaw Chuck with Top Reversible Jaws, Inventory # 9105, Model: 8 1/4″ 3-Jaw Chuck, 8 1/4″ 3-Jaw Chuck, Top Reversible Jaws, D1-3 Mount, FOB Our Baltimore, MD Warehouse, Related.

This is a NEW Kitagawa B-206 3-Jaw lathe chuck with a A2-5 back plate mounted on it. It is 169mm or 6.65" in diameter and has lubrication nipples on each base jaw for easy maintenance. s hardened & ground surfaces that ensures high accuracy & long endurance with a maximum gripping force of 57Kn or 12,765 lbs ...more

SERIAL. 77529MODEL. RJ2280ZXSWING OVER WAYS. 22"SWING IN GAP. 29-1/2"SWING OVER CROSS SLIDE. 14"DISTANCE BETWEEN CENTERS. 80"LENGTH OF GAP. 12"SPINDLE SPEEDS. 25 TO 1800 RPMTHREADS (ENGLISH). 2 TO 60 TPIFEEDS.0028 TO.0248 IPRMETRIC THREADS. (24).05 TO 20 TPMMDIAMETER OF SPINDLE HOLE. 3-1/8"3 JAW CHUCK. 12" 4 JAW ...more

Size 32"x160"cc Make POREBA Year 1980, ONE USED - 32” x 160’cc POREBA Engine Lathe, Model: TPK80A/4M, Serial Number: 1179-546, New 1980, 32” Swing Over Bedways, 21” Swing Over Cross Slide, 40” Swing In Removable Gap, Hardways, Taper Turning Attachment, Inch / Metric Threading, Power ...more

SERIAL. 14C-1262, MODEL. MAKINO, NEW. 19, SWING OVER BED. 15", SWING OVER CROSS SLIDE. 10", DISTANCE BETWEEN CENTERS. 54", SPINDLE SPEEDS. (12) 45 TO 1,800 RPM, SPINDLE NOSE. D1-6, HOLE THROUGH SPINDLE. 2-9/32", THREADS INCH. (48) 2 TO 112 TPI, THREADS METRIC. (40) 0.25 TO 14 MM, FEEDS. (48) 0.0018" TO 0.104", STEADY ...more

SERIES. 1, AREA OF TABLE. 42" X 9", SPINDLE SPEEDS, VARIABLE. 60 TO 4200 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 12", DEPTH OF THROAT. 6-3/4" TO 18-3/4", TAPER IN SPINDLE. R8, HEAD TILTS, FRONT/BACK. 45 DEGREE ...more

, Hartford Super Spacer with Cushman 3 Jaw, 8" Chuck. Used tooling accessory offers a 2-1/2" center/through hole. Ideal for precision work, durable 3-jaw setup. Manufacturer: Hartford. Model: Super Spacer. Perfect for enhancing your setup., Spec Sheet:, Hartford Super Spacer w/ Cushman 3 Jaw 8 Chuck, USED, BRAND: ...more

SERIAL. H4745, MODEL. 2VSO8, AREA OF TABLE. 49" X 9", SPINDLE SPEEDS, VARIABLE. 60 TO 4000 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 12", DEPTH OF THROAT. 6-3/4" TO 18-3/4", TAPER IN SPINDLE. R-8, HEAD TILTS ...more

Spec Sheet:, 8in Cushman 3 Jaw Chuck, USED, Brand: Cushman, Chuck, Model: 836E2, Jaws: 3, Center Hole: 2.25, Overall Diameter: 8, Keyslot: 3/8, Comes with Chuck Key.

36", 4-Jaw, w/out jaws, Make: ?No.: 36"4 jaws w/out jawsSpindle nose: A15T-Slot: 1.5"PICE: $1000.00*** SHOWN ARE TO BE USED AS A GUIDELINE ONLY. IT IS THE CUSTOMERSRESPONSIBILITY TO CHECK FOR SIZE ADN S BEFORE PURCHASING. WE WILL NOTBE RESPONSIBLE FOR ERROR OR OMISSIONS.***.

Stock #: 82698 Category: Vertical Motors HP: 125 RPM: 1780.00 Frame: 444LP Enclosure: TEFCBB Make: US Motors Volts: 230/460 Service Factor: 1.15 Condition: Electrically O.K. Location: Toledo, OH.

SERIAL.MODEL. 2280BYEAR.SWING OVER WAYS. 22"SWING IN GAP. 31"DISTANCE BETWEEN CENTER. 80"SWING OVER CARRIAGE. 13.2"HOLE THRU SPINDLE. 4.5"SPINDLE SPEEDS (VARIABLE). 10 TO 1000 RPMTHREADS ENGLISH. 2 TO 56 TPITHREADS METRIC. 0.5 TO 7MMFEEDS. 0.0022 TO 0.32 IPRCROSS FEEDS. 0.00026 TO 0.035 IPRSTEADY REST. 8-1/2" & ...more