Buy or Sell Your Vertical Lathe

Spec Sheet:, Dorian Tool Set of 3 Tool Holders w/ Kennametal Tool, Brand: Dorian Tool, Set of 3, Part Numbers Include:, D35CXA-1, Holder Number: 1 (Turning & Facing), Series: CXA (for 14" to 17" swing lathes), Tool Capacity: 3/4" to 1" square shank, Dimensions: 3.75" Length (C) x 2.5" Height (E) x 1.75" Width (D) ...more

CHUCK DIAMETER: 24", MAX WEIGHT: 1100 LBS., MAX SWING DIAMETER: 31", MAX TURNING DIAMETER: 23.5", X STROKE: 30", Z STROKE: 19", MAIN DRIVE:, POWER: 100 HP, FULL POWER AT 800 RPM, MAX SPINDLE RPM: 2,000, C AXIS POSITIONIONG TO.01MM ANGULAR DEGREES, FEED DRIVE:, RAPIDS Z / Z: 60 / 30 M / MIN., FEED FORCE X / Z 4 / 15 ...more

Sicotte Model J-3-H-7 Vertical Boring Machine Available in as-is condition, or you can contract RT Service to fit it for your particular application. We can repair and add spindles/hold-downs as needed! Table Size and Boring Area: 84" x 24" Five (5) - 1.5HP, 230/460v, 3ph Spindle Motors Currently with Four Spindles ...more

MIYANO OCEAN GN-3200 GANG TYPE CNC CHUCKER WITH ROBOTIC LOADING, Max. turning dia. (mm) 45, Max. turning length (mm) 50, Miyano, GN-3200, Efficient and space-saving, hand in hand with traditional precision., Designed for high-througput machining of small diameter workpieces, this machine has a wing type fixed spindle ...more

LODGE & SHIPLEY 40" x 77" HEAVY DUTY ENGINE LATHE, MODEL# 25"/35", SWING OVER BED: 40", SWING OVER CROSS SLIDE: 30", DISTANCE BETWEEN CENTERS: 77", SPINDLE SPEEDS (25): 9 - 507 RPM, SPINDLE HOLE BORE: 2-1/2", MAIN MOTOR: 30 HP, THEADING: INCH ONLY, ELECTRICS: 220/440V, 3-PHASE, WEIGHT: 20,000 LBS, DIMENSIONS ...more

Lodge & Shipley 40" x 77" Heavy Duty Engine Lathe #6771 #2, SWING OVER BED: 40", SWING OVER CROSS SLIDE: 30", DISTANCE BETWEEN CENTERS: 77", SPINDLE SPEEDS (25): 9 - 507 RPM, SPINDLE HOLE BORE: 2-1/2", MAIN MOTOR: 30 HP, THEADING: INCH ONLY, ELECTRICS: 220/440V, 3-PHASE, WEIGHT: 20,000 LBS, DIMENSIONS (IN.): 192" ...more

CENTAURO TC-1200 Copy Lathe;47-1/4" Max. between centers. -- 4-3/4" Height of centers over bed. -- Max. copy dia. 6" (4-1/8"). -- Max. dia. permitted by traveling steady 3-1/2" (2-1/2"). -- 4 HP main motor, 900 - 1,500 - 2,200 & 3,540 RPM spindle speeds. -- 1 HP hydraulic variable speed carriage with tool post and ...more

72", GIDDINGS & LEWIS CNC CONTROL W/MILLING SPINDLE IN RAM, MAKE: G&L (R&D&D) HYPRO DUAL RAM CNC VERTICAL BORING MACHINETABLE DIAMETER: 72"MAX. SWING: 74"UNDER RAIL: 67"MAX. HEIGHT UNDER RAIL: 58"LEFT RAM TRAVEL: 30"RIGHT RAM TRAVEL: 50"LEFT RAM MILLING/DRILLING 20 HPSPEEDS 2 RANGES 5-3000 RPMMILLING ...more

2009 Giddings & Lewis 48VTC, 48" Chuck, 60" Swing, 350 RPM, 24 Position ATC, Fanuc CNC, Live Milling, 2009 GIDDINGS & LEWIS 48VTC, Table Dia. 48", Swing. 62", Work Ht-U/R. 65", Power. 50 hp, RPM. 400 RPM, Control. CNC, Dimensions. 156 in x 132 in x 140 in, Weight. 65000 lbs, 48" 4-Jaw Independant/Scroll chuck ...more

BULLARD CUTMASTER, Table Dia. 54", Swing. 62", Work Ht-U/R. 44", Power. 30 hp, RPM. 160 RPM, Dimensions. 110 in x 105 in x 120 in, Weight. 20000 lbs.

TECHNICAL, CAPACITY:, TABLE DIAMETER 39.4", SWING OVER BED 49.2", MAX. TURNING DIAMETER 39.4", MAX. TURNING HEIGHT 35.0", TABLE SPEEDS 13-1250 RPM, X-AXIS TRAVEL 22.2", Z-AXIS (RAM STROKE) 35", TABLE CAPACITY 2640 LBS., RAPID TRAVERSE, X/Z-AXES 945 IPM, CROSS RAIL ELEVATION, 4-STEP 23.6" (5.9" PER STEP), SPINDLE MOTOR ...more

Table Diameter (4-Jaw): 168", Max Swing: 234", Height Under Rail: 108", Speeds (variable): 0 - 27 RPM, Ram Travel: 60", Ram Swivel: 45 Degrees, Motor( 280 VDC): 75 HP, Table Weight Capacity (Est.): 40 - 50 Tons, (2) Rams On Rail, Free Standing Hydraulic Unit, Updated Electrics with HMI Panel interfaced to PLC ...more

Table Diameter: 90.55", Max. Swing: 95", Ram Stroke: 56", Height Under Crossrail: 70", Height Under the Ram: 63", Swivel of Ram: 30/ 45 Degrees, Table Speeds: 12 - 36 RPM, Feed Rates: 0.0098 - 0.4724 IPM, Floor Space: 240" x 144", Dimensions: 162" x 228" x 172", Weight (Approx.): 45,000 lbs, Push Button Controls on ...more

CAPACITIES, SWING OVER BED: 10.63", SWING OVER CROSS SLIDE: 5.12", COLLET: 5C, HEADSTOCK, SPINDLE BORE: 1.25", MAXIMUM SPEED: 6,000 RPM, MAXIMUM RATING: 5 HP, COOLANT PUMP: ¼ HP, TRAVELS, X-AXIS: 15.75", Z-AXIS: 7.87", DIMENSIONS: 89.37"X 34.64" X 68.11", WEIGHT: 1,994 LBS ...more

5-AXIS MACHINING CENTERS DECKEL MAHO DMU 50 eVo linear SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: Used 2007 DMG MORI DECKEL MAHO DMU 50 eVo linear 5-Axis Simultaneous VMC: Made was made at DECKEL MAHO Seebach GmbH in Seebach, Germany -CONTROL- Heidenhain iTNC530 CNC ...more

* Fanuc 18-T Control, * 5000 RPM, * 10 HP Spindle, * Coolant System with Chip Conveyor, * 6 ID Tool Holders, * ~50 Collets, * 10 Straight & Right Angle Milling and Drilling Live Tools, * 8838.3 Hours, Swing 21.2" 538.48 mm Machining Length 13.1" 332.74 mm Bar Capacity 1.625" 41.275 mm Power 10 hp ...more

New TrioFab Bulldog Pipe Positioner, Model: BD-3000 (Bulldog), 3,000 Pound Capacity @ 6'' COG, 0.1 - 1.75 RPM Variable Speed Range, 20,800 Inch Pounds of Rotational Torque, 1/2 HP Rotation Motor, 36'' Center of Chuck to Floor, 20'' Self Centering 3 Jaw Lathe Style Chuck, 120 Volt Input, Hand ...more

MAZAK PMC CNC LATHE Oil Country Pipe threader MAZAK PMC CNC LATHE, Model PMC (Power Master Chucker), CNC Control Mazatrol T Plus, Serial number 129138, Serial number 129136, Year of manufacture 2000, Swing over bed 42", Turning diameter 39", Swing over gap 48", Width of gap 20", X-axis travel 25", Z-axis travel 45" ...more

OKUMA VTM100 CNC VERTICAL TURNING CENTER with C-Axis and Milling, Capacity:, Max Machining Diameter: 39.37″, Max Machining Height: 33.07″, Max Swing Diameter: 39.37″, Max Workpiece Load: 2,640 lbs, Travel:, X Axis Travel: 25.59″, Z Axis Travel: 30.07″, C Axis: 360° (0.001°), Rapid ...more

REMEDY CNC GANG TOOL LATHE, PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $15,500.00, HMC Stock # 22218-P, Machine Serial No.: 100161, Machine Model No.: S25L, New Date: 2018, Maximum Machining Diameter: 1", Maximum Bar Capacity: 1", Maximum Turning Length: 4.7", Maximum Longitudinal ...more

Emmegi Single Head Cutting Off Machine 650 SCA/E (subject to buyer verification):Machine :Single-head, rising blade cutting-off machine, with N/C automatic rotation of the vertical axis (through D.C.motor) and hydraulic tilting of the horizontal axis. Cutting with angular settings from 90° to 22°30’ (to ...more

52", KING, No. 52, 1955, MAXIMUM SWING 60", 36" UNDER RAIL, 40 H.P., UNDER POWER, Capacity 52" 1,320.8 mm NEW: 1955, TABLE DIAMETER. 52", MAX. SWING. 60", MAX. HEIGHT UNDER RAIL. 36", MAIN MOTOR. 40 HP, RAM STROKE. 30", TURRET STROKE. 30", TABLE SPEEDS (16). 4.84 - 151 RPM, THREADING. 2 - 18 TPI, FEEDS (12). ...more

NEW Industrial Walk In Oven Model #ST664, 144 Cubic Ft. Interior, I.D. 72" X 48" X 72", O.D. 109" X 61" X 103", Temperature Range: Ambient +5F to +500 Deg. F, Double Doors With Slam Latches, Aluminized Steel Interior, 2400 CFM, Direct Drive Motors, Selectable Air Flow: Horizontal, Combinations, Compound, Vertical Up ...more

Spec Sheet:, Dorian Tool D35CXA-41 Boring Bar Holder w/ Boring Bar, USED, Brand: Dorian Tool, Part Number: D35CXA-41, Boring Bar Holder, Bore: 1-1/4, Lathe Swing: 14 to 17 inches, Overall Width: 3.75", Overall Height: 2.5", Length: 2.5, Comes with:, Seco Carboloy, Part Number: S1-MWLNR-20-3, Boring Bar, OAL: 14 ...more

MIYANO BNA-42S CNC Turning Center (used) New 2013 w/MIYANO M-542 magazine bar loader (12'), part conveyor, chip conveyor, live tools, sub spindle. Live turret tools., Key s & :, Type: 5-axis CNC Lathe / Turning Center., Bar Capacity: ~1.65 inches (42mm)., Spindles: Main & Sub-spindle with C-axis., Turret: ...more

SERIAL. 326203/233, MODEL. FU450X1800, AREA OF TABLE. 72" X 21", TABLE SWIVELS. 45 DEGREES EACH WAY, HORIZONTAL SPINDLE SPEEDS. (18) 45 TO 2240 RPM, FEED RANGE, LONG AND CROSS. (18).63-31.5 IPM, FEED RANGE, VERTICAL. (18).20-10 IPM, LONGITUDINAL TRAVEL. 52", CROSS TRAVEL. 14", VERTICAL TRAVEL. 24-3/4", SPINDLE TAPER ...more

SERIAL. 5577030, MODEL. 320-TF-16, AREA OF TABLE. 72" X 16", SPINDLE SPEEDS. (24) 15 TO 1500 RPM, LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL KNEE FEEDS. (32) 1/8 TO 30 IPM, VERTICAL HEAD FEEDS. (32) 3/16 TO 45 IPM, LONGITUDINAL TRAVEL. 34", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 18", VERTICAL HEAD ...more

VERTICAL SPINDLE. 3 HP (EST), GRINDING WHEEL. 6" DIAMETER, INSIDE GUARDS. 20" F-B X 40" L-R, POWER GRINDING HEAD FEED. YES, SET UP W/SPECIAL FIXTURE FOR END GRINDING, VERTICAL ADJUSTMENT. 4", VERTICAL CLEAR DISTANCE IN FIXTURE. 36".

Chuck: 6.5"X-Axis Travel; 3"Z-Axis Travel: 5.7"Number of Spindles: 2Spindle Nose: A2-5Spindle 1 Motor Power: 11.1 HP / 7.4 HPSpindle 2 Motor Power: 10 HP / 7.4 HPSpindle Motor Speeds: 50 - 4500 RPMNumber of Turrets: (2) 8-Position TurretsIndexing Time: 5 secondsRapid Feed X & Y-Axis: 945 IPMParts Loader  Work ...more

, Allied Machine & Engineering AMEC 20831-1500 C Series Indexable Spade Drill, used, 12-1/2" OAL, straight flute, 1-1/2" to 2-3/8" diameter range, perfect for tooling and drilling needs. Standard length, lathe shank type., Spec Sheet:, AMEC 20831-1500 | C Series Indexable Spade Drill, New in Box, 12-1/2" OAL ...more

NEW 15" x 67" SHARP MODEL KMA-1 VERTICAL BED MILL, Heavy duty vertical bed mill geared head spindle and massive hardened and ground bed ways for heavy milling, The vertical column is made out of box shape high tensile strength casting reinforced with honeycombed ribbings. It offers excellent vibration dampening s and ...more

520-16 CINCINNATI-MILACRON "DIAL-TYPE" VERTICAL MILL - #30516, Serial No 11A45VLAKE-49, Model 520-16, Series E, Trak 2-Axis Digital Readouts, Power Draw Bar - Hard Ways, Power Down-Feed to Head - Turret Depth Stop, Automatic Backlash Eliminator, Coolant System (Built-In), Rack Full Of Tooling, CATALOG :, Table ...more

Available for sale: A 100 bbl DW tank manufactured by Plains Oil Ltd. in the year 2000. The tank s a vertical position, a diameter of 16 inches, and a maximum pressure rating of 1480 psi. This portable unit is classified under sweet service type and is currently disconnected from operation. Located in Frenchman Butte ...more

CAPACITY:, Max. Turning Diameter: 28.7", Max. Turning Height: 29.5", Spindle Speed Ranges (1): 20-2,000 RPM, Spindle Motor: 50 HP, X-Axis Travel (Ram): 15.4", Z-Axis Travel (Rail): 31", X-Axis Guideway Span: 15.2", Z-Axis Guideway Span: 24.8", Rapid Traverse (X-Axis): 472 IPM, Rapid Traverse (Z-Axis): 630 IPM, Max. ...more

Spec Sheet:, PHASE II Quick Change Tool Post 250-333 6 Piece Set w/ Holders, USED, 6 Pieces in Set, Brand: PHASE II, Model #: 250-333, Lathe Swing: 13" - 18", Series: 300, Type: Wedge Type, Comes with 5 holders:, Part Numbers Include:, 250-301- Turning/Facing Holder, 250-302 Boring/Turning/Facing Holder, 250-304 ...more

SERIAL. 4A34V5P-12, MODEL. 415-15, AREA OF TABLE. 79-3/4" X 16-1/4", SPINDLE SPEEDS. (24) 16 TO 1600 RPM, LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL FEEDS. (32) 3/16 TO 45 IPM, LONGITUDINAL TRAVEL. 42", CROSS TRAVEL. 16", VERTICAL TRAVEL OF KNEE. 16", VERTICAL TRAVEL OF HEAD. 6", TAPER IN SPINDLE. ...more

Model GH2200, Year of Manufacture 1988, Table working size 51.2" x 11", Table travel--longitudinal 39.4", --cross 14.2", --vertical 17.7", Table feeds--number, --longitudinal & cross.6 to 27.5 ipm, Rapid traverse--longitudinal & cross 118 ipm, --vertical 31 ipm, HORIZONTAL SPINDLE:, Spindle taper #50 taper ...more

(NEW) MARVEL TILT FRAME VERTICAL BAND SAW, MODEL: Series 8 Mark III, FACTORY, *Tilting Column For Straight and Miter Cutting, *Miter Cutting: Column and Blade Tilt Up To 60 Degrees Right and Left of Vertical, *Work Always Stationary. Built-In Protractor., Capacity, Blade At 90 Degrees: 18" Horizontal, 22" Vertical ...more

Supermax Vertical and Horizontal Milling Machine, 51″ x 11″ Table, Table Travel Longitudinal 39.4″, Cross Travel 14.2″, Vertical 17.7″, More info to come.

The Vantec Veneer Auto Stacker, ELV 1.82B is a Vacuum stacker for 2800 mm Veneer lathe. It is fitted with double stacking system (04 bins), with four veneer transport lines and four 5hp exhausters. with of two stoppers and eight ejecting arms. With drive Panel, VSD for exhaust fans and hydraulics lifting tables., Min ...more

KEARNEY & TRECKER 430TF-20 Horizontal Mill #8140, Table working surface: 19-1/2" X 88", Range, longitudinal: 42", Cross: 14", Vertical, knee: 21", Horizontal spindle speeds (24): 15 - 1,500 R.P.M, Longitudinal and cross feeds (32): 3/8 TO 90 I.P.M., Vertical knee feeds (32): 1/8 TO 30 I.P.M., Longitudinal and ...more

SERIAL. 41-4192, MODEL. 3H, AREA OF TABLE. 64" X 13-1/2", LONGITUDINAL TABLE TRAVEL. 28", CROSS TABLE TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 14", VERTICAL TRAVEL OF HEAD. 6", SPINDLE SPEEDS. (16) 20 TO 1000 RPM, SPINDLE TAPER. #50 NS, FEEDS (LONGITUDINAL & CROSS). (16) 1/2 TO 30 IPM, FEEDS (VERTICAL). (16) 1/4 TO ...more

WISCONSIN 500 F ELECTRIC WALK IN OVEN, 8'WIDE X 8'LONG X 8'HIGH, DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEATING ELEMENTS AN CIRCULATING FAN ARE MOUNTED ABOVE WORK CHAMBER IN A PROTECTED AREA. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS AND RETURNS THROUGH THE ROOF CREATING A COMBINATION ...more