Cut Off Machines

, Model: 2A, Capacity: 1/8" - 2", Spindle Speed: 800 RPM, Equipped W/:, Rear Slides, Coolant system, Horsepower: 3, Machine Type.Clamping Machines Manufacturer.N/A Model.2A Year.N/A Condition.Used.

MODEL: 2L, SERIAL #: 2308, 1/8"-2-1/8" TUBE CAPACITY, 2" SOLID BAR CAPACITY, 60" MAXIMUM CUT LENGTH, 197-3000 R.P.M. SPINDLE SPEEDS (TYPICAL), ROLLING TYPE POINT OF CUT GUARD, 2 SLIDE MACHINE FRONT AND REAR, 25' AUTOMATIC DESCRAMBLING TUBE RACK, AUTOMATIC LUBRICATION, COOLANT TANK AND PUMP, ELECTRONIC VARIABLE SPINDLE ...more

Tube Diameter Range: Up to 1/2″Rotary Cut-Off Head – 1 Knife, 2 Roller SupportsHand Wheel Adjustable Run-Out with LockStroke CounterAfter Tube is Cut to Length it Falls Down to Deburring Headswhere Both Ends are Simultaneously Deburred, MOTOR DATA:Roller Cut-Off Head – 1/4 HP ...more

SERIAL. 2A-21269, MODEL. 2A, CAPACITY, OUTSIDE DIAMETER. 7/8" TO 2", MINIMUM DIAMETER WITH SPECIAL TOOLING. 1/4", HEAVIEST WALL. 1/4", DIAMETER OF CUT OFF WHEEL. 7", STROKE OF AIR CYLINDER. 4", STOCK STOP. YES, IN FEED TUBE SUPPORT TABLES. YES, ELECTRIC FOOT TRIP. YES.

UTUBE NUMBER: 3645, MANUFACTURER: HAVEN, MODEL NUMBER: 871, Maximum Tube Diameter: 1-1/2″ (38.1 mm), Maximum Squares & Rectangles: 1″ (25.4 mm) Diagonal, Minimum Tube Diameter: 3/16″ (4.74 mm), Maximum Wall Thickness:.094″ (2.38 mm), Line Direction: Right to Left, Cycle Speeds: Up to 5,400 ...more

SERIAL.: 2138, MODEL.: 2K, CAPACITY.: 1/8" - 2", SPINDLE SPEEDS.: (16) 197-3030, SOLID BAR.: 2", PASS LINE.: 39", REAR SLIDE.: YES, STOCK STOP.: YES, Machine Type.Tube Machinery, Cut Off Manufacturer.MODERN Model.2K Year.N/A Condition.Used.

Used- Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter:.235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB Drives, spare cut off die., Category Machine Tools Subcategory Machine Tools.

Listing : Pre Owned 1996 Modern Model 2LD Conventional Cutoff Lathe Serial Number: Capacity 1/4” tp 2 1/4” OD Main Motor Horsepower 10 Spindle Speeds 196 - 3027 One Second Index Time 16 Spindle Speeds Removable Chip Pan No Thrust Main Spindle Bearings Approximate Overall Dimensions ”L X ” W X ...more

UTUBE NUMBER: 3501, MANUFACTURER: CUSTOM, Maximum Part Dimensions: 2.75" x 2.75", Blade Diameter: 10", Travel: 2′ 10", Line Direction: Right to Left, 12′ Dump Table with Target (pneumatic operation), 1/3 HP Motor 240 / 3 / 60, Electrical Controls, Push Buttons, OVERALL DIMENSIONS: 16′ ...more

UTUBE NUMBER: 3836, MANUFACTURER: HAVEN, MODEL NUMBER: 872, SERIAL NUMBER: 4060, Maximum Tube Diameter: 3″ (76.2 mm), Maximum Squares & Rectangles: 3″ (76.2 mm) Diagonal, Minimum Tube Diameter: 1/2″ (12.7 mm), Maximum Wall Thickness:.120″ (3.04 mm), Line Direction: Left to Right, Cycle ...more

UTUBE NUMBER: 3572, MANUFACTURER: HAVEN, MODEL NUMBER: 872, SERIAL NUMBER: 3960, Maximum Tube Diameter: 3" (76.2 mm), Maximum Squares & Rectangles: 3" (76.2 mm) Diagonal, Minimum Tube Diameter: 1/2" (12.7 mm), Maximum Wall Thickness:.120" (3.04 mm), Line Direction: Left to Right, Cycle Speeds: Up ...more

Tube Diameter Range: 3" Round, Tube Diameter Range Squares: 2.125" Square, Maximum Wall Thickness: 0.120", Maximum Incoming Tube Length: 25’, Maximum Outgoing Tube Length:120", Hand of Operation: L to R, s, Burrmaster Model 2 Deburring Unit with 24" Brushes (2)10HP Motors, PLC Controlled ...more

UTUBE NUMBER: 3343, MANUFACTURER: MODERN, MODEL NUMBER: 3LD, SERIAL NUMBER: 3L-D3457, Maximum Tube Diameter: 3-1/8″ (79.3 mm), Minimum Tube Diameter: 1/4″ (6.35 mm), Maximum Wall Thickness: 1-1/2″ (38.1 mm), Stock Feed Rate: 160 FPM (49 m/min), 16 Spindle Speeds: 130 – 2012 RPM, Bundle Feeder ...more

MODEL: SIN-O-MATIC, TR90/2-350, SERIAL #: 973, 3.58" MAXIMUM DIAMETER CAPACITY, 1.5"-3.25" CAPACITY, 13.5" MAXIMUM CUT OFF LENGTHS, 4 POSITION TURRET, CUT OFF, I.D., O.D., DISCHARGE, PART SENSOR, 27' BUNDLE RACK, 13" SAW BLADE, MISCELLANEOUS TOOLING, COOLANT, CHIP CONVEYOR, HYDRAULIC, UPDATED CNC CONTROLS, GOOD ...more

OD Range: 2"-4.5", Max Wall Diameter:.235", Max Speed 250 FPM, Hydraulic Accelerator, Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors, Unico Controller, ABB Drives, spare cut off die, Currently Installed and Running.

UTUBE NUMBER: 2730, MANUFACTURER: ALPHA INDUSTRIES, MODEL NUMBER: 50 – 187 – 120, SERIAL NUMBER: 102, YEAR:, Inclined Type: 45 Degree, Tonnage: 200 Ton, Maximum Tube Diameter: 5″ (127 mm), Minimum Tube Diameter: 1-1/2″ (38.1 mm), Maximum Wall Thickness:.250″ (6.35 mm), Minimum Wall ...more

The Rotary Fine-cut Saw (RFS) Cut-off Machine outlined herein is a pinnacle of the Flying Cut-off machines for the pipe production of round, square and rectangular shapes. The two tip saws disposed on the surface of a rotating disk, being controlled by the AC servo-motors, assure you to attain the marvelous cut-off ...more

Make: Emmegi, Model: RADIAL LIBRA, Year: 2015, Machine Location: South Dakota, Capacity, Thickness: Up to 19.68″, Cutting Capacity, Length: 157.48″, Cutting Head Tilt up to: 30°, Overall Dimensions (L x W x H), approx.: 354.33″ x 236.22″ x 51.18″, Weight, approx.: 3,527 lbs. ...more

UTUBE NUMBER: 4029, MANUFACTURER: HAVEN, MODEL NUMBER: 873, SERIAL NUMBER: 5330, PRELIMINARY :, Maximum Tube Diameter: 3″ (76.2 mm), Maximum Squares & Rectangles: 3″ (76.2 mm) Diagonal, Minimum Tube Diameter: 1/2″ (12.7 mm), Maximum Wall Thickness:.120″ (3.04 mm), Line Direction: Left to ...more

UTUBE NUMBER: 4034, MANUFACTURER: HAVEN, MODEL NUMBER: 875, SERIAL NUMBER: 3870, PRELIMINARY :, Haven Cutting Capacity:, Round: 1″ – 5″ (25 – 127 mm), Square: 3-3/4″ (95 mm), Rectangle: 2″ x 4″ (50 x 115 mm), Maximum Wall:.165″ (4.2 mm), Cut Tube Lengths: 4″ ...more

Machine, Manufacturer Reika, Type 272 No. 30350 R13003-1, Weight 9to per machine, Power 80KW per main drive Fhz, Mains voltage / rated current 400V / 48A, Available crane capacity: Crane 265 / 12.5t-6.3t, Workpiece, Min. wall thickness : 6 mm, Max. wall thickness : 30 mm, Sample rings length: from 20 mm, Trim cuts : ...more

Machine, Not used for 1 year, Wirth machine type: RAE660, Feed min. 1.34mm /rev max. 48mm/rev, Revolution of the hollow spindle min. 6.7 rpm. max. 80 rpm, Machine weight: 30,500 kg, Operations:cutting-off pipe ends.