Buy or Sell Your Lapping Machines

Milltronics ML26/40 CNC Combo LatheCNC Lathe (subject to buyer verification):Swing Over Bed: 27″Swing Over Cross Slide: 16.1″Swing Over Gap: 34.2″Gap Distance: 12.75″Bed Length: 40″Spindle Bore: 4″Spindle Speed: 1,600 RPMSpindle Nose: A1-11X – Axis Travel: 13″Z – ...more

WIDTH OF PLATE. 20", HEIGHT OF PLATE. 48", DEPTH OF PLATE. 24", NUMBER OF T SLOTS. 9, T SLOT CENTERS. 5", T SLOT WIDTH AT TOP. 1", T SLOT DEPTH. 2, T SLOT WIDTH AT BOTTOM. 1-3/4", NUMBER OF TAPPED HOLES. 106 PER SIDE, ROWS OF DRILL & TAPPED HOLES. 18 PER SIDE, DIAMETER OF HOLES. 3/4", HOLE CENTERS. 2-1/2".

(1)-4-PRONG TWISTLOCK OUTLET, (1)-GFCI, (4) 1250 SHO METAL HALIDE LAM, 135,500 LUMENS (PER LAMP), 542,000 TOTAL LUMENS, CAT C.1 ENGINE, FLUID CONTAINMENT SYSTEM (30GAL), GVWR = 2,200LBS, HYDRAULIC WINCH, LENGTH - 119.8IN, MARATHON GENERATOR, MAST LOWERED HIGHT - 8.3FT, MAST RAISED HIGHT - 26.7FT, OPERATING HOURS (50 ...more

150 KVA 240 Pri. 400Y/230 Sec., with Taps, Isolation Type, H-30.75", W-30.75", D-27.75", 970 lbs., Aluminum Wound, 150 Degrees C Rise, 220 Degrees C Insulation System, Indoor / Sprinkler Proof Enclosure (Nema 2), 2, -2 @ 2.5% Taps. Terminal Lugs Included (No Charge)., Immediate Shipping From Our Stock!, Call, E-mail ...more

Used NJM rotary capper, model ROTAC8-S003, (8) head, with reject, currently set up for 2" caps, with NJM cap elevator, Allen-Bradley PLC, VFDs and touchscreen interface, 208 volts, 3 phase, serial# 24417-01, built 2008.

****ATTACHMENTS PICTURED ARE****, ***BE INCLUDED IN THE PRICING***, **SUBJECT TO CHANGE AND MAY NOT*, 6S LGP BULLDOZER, Accugrade Ready, AIR CONDITIONER, ROPS, ALARM, BACKUP, ALTERNATOR, 150 AMP, BASIC ARRANGEMENT, BLADE, 6S LGP ARO, CAB, SINGLE PANE, CLEAN EMISS MOD- T4F, CYLINDERS, LIFT, STD, LGP, ENGINE COOLANT ...more

Make: Pearson, Serial # 5866-5, Material Width: 10', Material Thickness: 1/2", Power back gauge, (with analog numerical readout), Squaring arm (calibrated), Adjustable rake, Adjustable gap.

One (1) 51" (1300mm) Wide Titan SR6 Slitter Rewinder, 40" Diameter unwind 3" air shaft, Edge Guide, Reel Lift, Razor and Shear Slitting, Rewind diameter: 24", Full Width Lay on Rollers, 3" (76mm) differential ball chucks, Laser Core positioning, Trim Extraction, Manufacturer TITAN Model SR6 Condition Used Stock Number ...more

SERIAL. 010662, MODEL. S-36, REACH. 14" TO 51", TAP CAPACITY. #6-9/16", TORQUE. 28FT/LB, RPM. 400, AIR. 90 PSI/ 28 CFM, TAP/DRILL HEAD INCLUDED. YES, **NO TABLE**.

Johnson Controls A70BA-6 Temperature Control, Open and Seal 38 deg F, 15-55 F - Johnson Controls A70BA-6 Temperature Control, Close High, Open and Seal 38 deg F, 15-55 deg F Range, 1/2" NPT Connection, 11/16 x 3-1/4" Bulb, 15 ft Cap Tube - Johnson Controls - Johnson Controls - A70BA-6 - A70BA-6.

Pneumatic Scale 36" OD stainless steel bowl feeder rated up to 300 containers per minute. Capable of running cap sizes from 15mm to 89mm OD. 10" discharge opening using an automatic feed rate metering system for accurate cap supply. Mounted on mild steel base., OAD: 37" L x 46" W x 75" H.

SERIAL. 016525, MODEL. RNR 20, YEAR NEW. 2008, TAPPING CAPACITY. 1/4" TO 7/8" MAXIMUM, REACH. 17" TO 73", RPM. 100/400, TORQUE. 78/28FT/LBS, AIR. 90 PSI, STAND AREA. 19 "X 37", SWIVEL VISE. YES, PNEUMATIC VISE. YES, TOOLING. YES.

193 Tons X 12’ Hydraulic Press Brake with Delem DA-66T Control, WILA Tool Clamping, Automatic Crowning, Integrated Fiessler AKAS Safety System, Independent Y1 & Y2 Control, Integrated LED Lighting, Front Mounted Supports and Foot Control Panel., Tonnage: 193 T, Motor Output: 15.0 kW, Max Working Length: ...more

CINCINNATI 12' X 1/4" MECHANICAL POWER SQUAARING SHEAR, MODEL: 1812G, CAPACITY | 12' X 1/4", MILD STEEL, SPEED | 60 SPM, GAP | 18", FRONT OPERATED POWER BACK GAUGE, SQUARING ARM.

used- e-pak model 3 spindle automatic inline quill capper with integrated cap elevator / sorter. capable of speeds up to 120 caps per minute. container range: 2" - 14" (height), up to 5.5" maximum diameter. overall cap size range: 26mm - 110mm diameter, feeder and cap chute last ran 110mm caps and will require change ...more

921703.011, One (1) unused EDI 14" sheet die. Unit has three center back entrances. Center entrance is 1.0" diameter and upper and lower entrances are.5" diameter upper flexible lip. Fixed integral lower lip. Lip opening range.010-050. Die serial number 92-14477. 230/160. Mounted upstream of the die is an EDI three ...more

Manufacturer: Donaldson ToritModel: CPC-4Serial Number: 10070056-L1-1Collector Type: PowerCore Dust Collector, Performance & Blower Blower Manufacturer: New York BlowerAirflow (CFM): 2,860 CFMBlower Speed: 3,500 RPMMotor Horsepower: 7 HPMotor Frequency: 60 Hz, Controls & Electronics Control Panel: IncludedDust ...more

Make: FARO Technologies, Model: QuantumE V2, 7-Axis, 2.5m Reach, Year: 2021, Machine Location: Upon Request, Equipment Overview, This 2021 FARO QuantumE V2 7-Axis portable CMM system includes the color-enabled PRIZM LLP HD probe and integrated 8-Axis rotary table, making it a premier solution for high-precision ...more

Johnson Controls A19AAF-44C Remote Bulb Temp Control, 1.8m Cap, SPDT, NEMA 1 - Johnson Controls A19AAF-44C Remote Bulb Temp Control, 1.8m Cap, SPDT, NEMA 1, 9.5Mm X 146Mm Bulb, 5/30C - Johnson Controls - Johnson Controls - A19AAF-44C - A19AAF-44C.

SERIAL. 96004SWING OVER BED. 32DISTANCE BETWEEN CENTERS. 120SWING IN GAP. 40GAP LENGTH. 8-1/2SWING OVER CROSS SLIDE. 19-7/8ENGLISH FEED. (72) 0.007 TO 1.52 IPRENGLISH THREAD. 1 TO 76 TPIMETRIC THREAD. 1 TO 240 MM PITCHSPINDLE SPEEDS. (18) 16 TO 900 RPMDIAMETER OF SPINDLE HOLE. 4-1/8CHUCKS. 23-3/4" 4-JAW, 12" 3 ...more

Model: 0612-SL (Mechanical), -Capacity: 0.375" x 12', -Gap: 18", -FOPBG: 48", -Squaring Arm, -Air Clutch/Brake, -Small Pit Required, -In Storage: Toledo, OH.

DLT C-Series Diesel Light Tower s, 4-high output 350 watt LED lamps with ability to provide the ideal industrial lighting. These LED lamps are energy-efficient with a long service life., Fork pockets, single point lift, and foldable tongue for easy handling and transportation, Extended service intervals of 750 hours ...more

MAZAK PMC CNC LATHE Oil Country Pipe threader MAZAK PMC CNC LATHE, Model PMC (Power Master Chucker), CNC Control Mazatrol T Plus, Serial number 129138, Serial number 129136, Year of manufacture 2000, Swing over bed 42", Turning diameter 39", Swing over gap 48", Width of gap 20", X-axis travel 25", Z-axis travel 45" ...more

Engine Lathe, used but robust with 39-3/8" swing over bed, 120" between centers, and a 20.25" spindle bore. s include ACURITE DRO, 30 H.P. motor, and multiple steady rests., Swing over bed ways- 39-3/8, Swing in Gap- 48-3/4, Swing over cross slide- 28-3/8, Length of gap- 13-3/8, Distance between centers- 120cc ...more

SERIAL. 99056, MODEL. N-3022X1600, SWING OVER WAYS. 30", SWING OVER CARRIAGE. 26", SWING IN GAP. 38", LEIGTH OF GAP. 12", DISTANCE BETWEEN CENTERS. 160", SPINDLE SPEEDS. 15 TO 1000 RPM, ENGLISH THREADS. 2 - 28 TPI, METRIC THREADS.5 - 56 TPI, FEEDS.002 -.028 IPR, SPINDLE HOLE. 4", STEADY REST. 15" ROLLER TYPE, CHUCKS. ...more

Fogg, automatic, stainless steel, monoblock system with waterfall style cap sorter / feeder, 32 head rotary cleaner, 24 head rotary pressure gravity filling, 8 head rotary capper and HEPA filtration system. Rated from 50 to 240 containers per minute – depending on materials and application. Waterfall style capp ...more

Model STM UV Finishing line 24" roll coat, wipers, UV Oven Model CV3 belt conveyor 24" wide x 10' long with 1/2HP motor Mode RC 24-B roll coater Work Maximum work piece dimension 24" w x 3" thick Feed speed 10-40 fpm with 1HP inverter controlled motor Application Roller #1 - Rubber coated UV/chemical resistant, 9 ...more

JVT-3926, ONE (1) 25000/28000/37333 KVA ELECTRIC SUBSTATION TRANSFORMER, 3 PHASE, 60 HERTZ, CLASS OA, 55/65 DEGREE C RISE, 6.50% IMPEDANCE, COPPER WINDINGS, 3 X 600:5 HV MRCT'S, 3 X 2000:5 LV MRCT'S, 1 X, 1200:5 NEUTRAL MRCT, HV TOP MOUNTED BUSHINGS, LV SIDE MOUNTED, BUSHINGS, DRAIN & SAMPLE VALVE, TOP ...more

Distance Between Centers (in) 40"| Spindle Bore: 3.07", Swing Over Bed (in): 16.9", Swing Over Crosslide (in): 9.52", Swing Over Gap (in): 25.5", Distance Between Centers (in): 40", Spindle Bore: 3.07", Spindle Speeds (rpm): [12] 20-2000.

Ratti Jean 153/4” wide circular blade caramel cutter. Can handle up to a 153/4” wide tray. an adjustable gap rotary blade assemly and (2) 153/4” wide x 23″ long tray tables. Control panel with left / right direction switch..

The Atlas Copco QAC 1500 TwinPower generator is a 20-foot containerized generator providing over 1 Megawatt of prime power!, The two 725kVA generators inside make it perfect for applications that have variable power needs, especially in the Industrial Power Plant (IPP), Events, Oil & Gas and Mining industries. It ...more

one(1) used Enercon Induction Cap Sealer. Model LM2534-1. Serial Number 72978-1. Rating 1 kw. Hand held coil. Input power: single phase, 115 volts. Water cooled:.35 gpm minimum. Sealing head: 28-89 mm plactic caps.

SKU: 139927, Model: MK-40, Condition: Surplus New, Electrical :, Amps: 2000 amps, Phase: 3-phase, Dimensions: 37.00 (H) x 14.00 (W) x 65.00 (L) inches, Additional :, Basic Insulation Level: 150 kV, Insulators: standard cap and pin.

York Controls Johnson Controls 371-03636-000 ISN Process Module for UDC - The Processor Module houses the micro-processor and memory modules for the UDC. All communications to the LAN and external devices (modems and computers) are through the Processor Module.The I/O modules connect to the Processor Module through a ...more

- Automatic, Snap capper capable of speeds from 90 to 250 cpm – speeds depending on materials and application. Has air assist on sorter and cap chute. Conveyor measures 3 1/4" W x 186" L and is 36" H above floor. Frame is painted C/S construction. Unit complete with hopper, sorter, cap chute, and ...more

Murzan Model DUS-50, sanitary, stainless steel, 55 gallon drum unloader with number of drums per hour – depending on materials, application, pump configuration and operator dexterity. Capable of unloading drums made of metal, plastic or fiber with, or without liners and capable of handling most viscous products ...more

(1) Used 30" NORTON Model 10 / 20 x 36 "High Swing" Angle Head Cylindrical Grinder; S/N 24971, Swing Over Bed.22", Swing Over Gap.31", Width of Gap.15", Distance Between Centers.24" (maximum), Workhead Travel Left to Right.28" (nominal), Table Taper Angle.0 - 5 Degrees, Workhead Speed ...more

, - Model: No model tag. This unit looks identical to other F-4 units we have in our inventory., - Manufacturer: Kaps-All Packaging Systems, Riverhead - New York, - Stainless Steel Construction Frame, - 4 Spindle - Capping Quill Wheels, - Left to Right Operation, - Container Stabilizer Belts, - Electronic Height ...more

SERIAL. C40235, MODEL. CROWN WN-4/2000A, NEW. 7/1984, SWING. 24", SWING OVER CROSS SLIDE. 13", SWING IN GAP. 32", LENGTH OF GAP. 11-1/2", SPEEDS. (16) 11 TO 1500 RPM, HOLE IN SPINDLE. 3-1/8", CHUCK. 15" 4 JAW, TAPER. YES, STEADY RESTS. 9" & 9-1/2", THREAD DIAL. YES, TAIL STOCK. #5 MT, STANDARD THREADING. 7/16" TO ...more

YEAR NEW 2008, X: 13 in, Z: 124 in, Swing Over Bed: 27 in, Swing Over Gap: 34.2 in, Gap Distance: 12.75 in, Swing Over Cross: 16.1 in, Spindle Nose: A2-11, Spindle Bore: 6 in, Spindle Range: 30-1600 RPM, Tailstock Quill Travel: 8 in, Tailstock Quill Diameter: 3.94 in, Tailstock Quill Taper: MT5, Automatic Turret, Tool ...more

SERIAL. 4983, SWING OVER WAYS. 23", SWING OVER CROSS SLIDE. 17", SWING IN GAP. 36", DISTANCE BETWEEN CENTERS. 96", LENGTH OF GAP. 18", SPINDLE SPEEDS. 14 TO 710 RPM, FEEDS LONGITUDINAL. (32).0028 TO.098 IPR, FEEDS CROSS. (32).0016 TO 0.055 IPR, THREADS. (81) 1/8 TO 70 TPI, METRIC THREADS. (67).04 TO 224 MM, DIAMETER ...more

Make: NARDINI MASCOTE, Model: MS 1640, Year: 1900, Machine Location: Illinois, Swing Over Bed: 16 1/8″, Swing Over Cross Slide: 10 1/4″, Swing In Gap: 22″, Length Of Gap: 4 3/4″, Distance Between Centers: 40″, Cross Slide Travel: 9 1/4″, Spindle Hole: 1.885″, Tailstock Taper: ...more

500 kVA 3 Phase Padmounted Transformer, Primary: 12470Y/7200, Secondary: 277/480, 5 Position Tap Changer, Dead Front, Loop Feed, Bayonet Fused.

Stainless Steel Tabletop Conveyor Section. Adjustable guiderails. Sprocket diameter: 5-1/2 in. Pitch: 2-1/4 in. Running gap for conveyor belt is 1-1/2 in. Infeed/exit height: 37 in. Overall dimensions: 11 ft. 4 in. L x 14 in. W x 41 in. H.

(1) Pre Owned 24"/33.75" X 120" MAZAK HERCULES AJAX ENGINE LATHE, Swing Over Bed 24”, Swing over Cross Slide 14.46, Swing over Removable Block Gap 33.75”, Length of Gap 16.34, Distance Beween Centers 10’, Spindle Bore 2.06”, Spindle Nose (Camlock Type) D1-8, Spindle Speeds 25 to 1,540 RPM ...more