Buy or Sell Your Jointer Planers

Adco, Model 15WAS-50-WD, Automatic, continous motion, stainless steel, wrap around, hot melt glue cartoner. Rated from 50 to 350 cartons per minute – depending on materials, application and machine configuration. a 1 to 2 lane diverter, (2) 2½" wide x 102" long infeed conveyors, 48" long ...more

Sollich, Model TC 1200D, 12 plate, chocolate tempering system. Rated up to 1,200 kg (2,645 pounds) per hour – depending on materials, application and machine configuration. (12) plate tempering chamber, water jacketed, scrape surface agitated zones, top and side 2½"OD / 2"ID Tri-clamp product ...more

Station 1:, PNEUMATIC PANEL FEEDER, Panel Pusher feeds individual panels from side loaded (w/forklift) scissor lift into panel cleaner. Photo electric eye activates arm that pushes panel into panel cleaner., Pusher arm: to feed panels into machine on demand, Switch: for remote mounting, Pass Line: 44", 24" Stroke with ...more

Maximum Tonnage 175 Tons Cutting Strokes 25 Type 4 Post Trims Flanges Of Part-Maximum Height 10" Total Cycle Time For Cocmplete Trim In Seconds 5 - 6 Die Space: Minimum Shut Height 5.75" Maximum Shut Height 18.25" Working Hgt - Floor To Top Of Lower Plate 43" Center To Center Of Guide: Left To Right 50" Center To ...more

WIDTH OF PLATE.: 28", HEIGHT OF PLATE.: 40", DEPTH OF PLATE.: 20", # OF TO SLOTS PER PLATE.: 6, Machine Type.Angle Plates Manufacturer.N/A Model.N/A Year.N/A Condition.Used.

LENGTH OF PLATE. 60", WIDTH OF PLATE. 30", HEIGHT OF PLATE. 11", THICKNESS OF TOP PLATE. 3/4", HONEY COMB CONSTRUCTION. YES.

LENGTH OF PLATE. 72", WIDTH OF PLATE. 48", PLATE THICKNESS. 12", HEIGHT OF PLATE ON STAND. 32".

New Caterpillar 1600 kVA Diesel Generator Set, 50 Hertz, New CAT Factory Worldwide Warranty with Factory Reman Model 3512B Engine, LO-BSFC (Best Fuel Economy), Not Emissions Compliant, CAT Premium EMCP 4.2 Generator Control Panel, Auto Start / Stop, Engine Safety Shutdowns, CAT SR5 Generator with Digital Voltage ...more

SERIAL. 0003-9628MODEL. ULTRA FLATLENGTH OF PLATE. 72"WIDTH OF PLATE. 48"THICKNESS OF PLATE. 12"PLATE HAS LEDGES. 2 SIDES DEPTH OF LEDGE. 4"MOUNTED ON FABRICATED BASE. YESHEIGHT OF PLATE ON STAND. 30-1/2"COLOR. BLACK.

Samuel/Titan Strapping Head for Bundles, Strapping Machine Model: Samuel SMSBM10, Drive Mode: Pneumatic, 3 Motors, 2 Cylinders, Strap Feed Speed: 5.6 Ft/Sec., Tensioning Capacities: 900 - 3,825 lbs., Adjustable, Strapping Head Model: Titan VS32, Joints: Tig Weld Joint, 2 Weld Points, Required Min. Package Surfaces: ...more

LENGTH OF PLATE. 102", WIDTH OF PLATE. 66", PLATE HEIGTH. 12", PLATE TOP THICKNESS. 2", HEIGHT ON STAND. 30".

used- etmw enterprises triple roller bar dough mixer, stainless steel. approximate 75 liter. jacketed bowl 18" front to back x 15" left to right x approximate 22" deep. triple bar agitator, (1) fixed roller bar, counter balanced top cover, manual crank bowl tilt. driven by a 10hp, 3/60/230/460 volt, variable speed ...more

SERIAL. 979004, GRADE. B, WIDTH OF PLATE. 18", LENGTH OF PLATE. 24", THICKNESS OF PLATE. 4-1/4", MOUNTED ON ANGLE IRON STAND. YES, FLOOR TO TOP OF PLAE. 37-1/2".

Make: Icon, Model: 10-Head Packaging System, Year: 2020, Machine Location: Texas, Used Automatic 10-Head Packing Machine with Integrated Scale System, Domino V320i TTO Printers, Conveyor & Mezzanine, 2020:, Previously used for packaging dried lentils, – Packing range: 0.35 oz (35 g) to 5.5 lb (2,500 g) ...more

36" L TO R OVERALL. 11" F TO B BETWEEN THE POSTS. THERE ARE TWO REMOVABLE STRIPPER BARS ON BED OF PRESS 18.5" APART. THE TOP PLATE (BELOW THE TRANSFER POT) IS 24" L TO R X 18.5" F TO B AND IS T-SLOTTED ALONG WITH THE BED. NOMINAL BED IS 30.5" X 20" (CROWN IS APPROX THE SAME IF TRANSFER POT AND PLATE IS REMOVED). CLAMP ...more

SERIAL. 13555, LENGTH OF PLATE. 60", WIDTH OF PLATE. 36", PLATE THICKNESS. 6", HEIGHT OF PLATE ON STAND. 35, COLOR. BLACK.

Model – PII-110, Serial - 0550160., Tonnage - 110, Throat Depth 20.5”, Open Height 14”, Closed Height w/o Die Block 7 ¾”, Stroke Length 7”, Platen Table Size 16” x 36”, Punch 1-7/16 in 1” A-36, Max Material 110 Tons, Plate Shear 18” Long, Plate Shear ...more

LENGTH OF PLATE. 115", WIDTH OF PLATE. 96", PLATE THICKNESS. 2-3/4", SOLID STEEL. YES.

WIDTH OF PLATE.: 72", LENGTH OF PLATE.: 288", THICKNESS OF PLATE.: 12", Machine Type.Tables, Floor & Layout Plates Manufacturer.N/A Model.N/A Year.N/A Condition.Used.

Used CAT G3306TA Generator Set; 2013 Model – 7409 Hours; 131kW Continous Power; 480/277V; EMCP 4.4 Controller; Breaker; 20′ ISO Container; Power Distribution System; Fuel Scrubber; Roof Mount Muffler; Load Tested & Serviced, Generator Set: Manufacturer : Caterpillar Package Model : G3306B TA Package ...more

WEMHONER - KTM-34/15-300 "PROFESSIONAL 3000, VARIOPRESS": Membrane Press with (3) Shuttle Trays; Automatic Pin System; Turnover Device; Paternoster High Production Line of appx.: (20 - 30) Cycles/Hour using heated platen dimensions: 3,400 mm x 1,500 mm (133.8" x 59").For 3D applications with high capacity. Use of the ...more

Prima EP-1030 Electric Press Brake, Prima EP-1030 Electric Press brake, New: 2014, Tonnage: 105T, Bending Length: 120.5, Daylight: 27.6, 5-Axis Back Gauge, Iris Plus Angle Control System, 32 Tool storage, Automatic Tool Clamping, CNC Crowning, Motorized Lazer Safe, Tool Storage, Tool Rotation Devise, Laser Scanner ...more

HTST Pasteurization System, previously operated at 20 GPM for 70 brix apple concentrate. Include pasteurizer skid, stainless sanitary process parts and in-line valve controllers, featuring a 7-pass holding tube (2" diameter x 9'), Avins Fabrication jacketed dome top, and a cone bottom product tank. The system ...more

Deck Size: 78" Wide x 180" Long Pneumatic Cylinder Raises Six Receiving Pans Workpiece is then lowered onto a set of six lateral chains spaced at: 0", 25", 42", 84", 132", & 180" Driven Bottom Roller (No Motor Currently) and Idle Top Feed Roller.

MAKOR Q1 Spray Line including Paint Pumps and Guns:This line was set up with the idea of adding a stack oven after the sprayer in the future if it is required. This line has seen very little use.Station #1: Infeed loading conveyorStation #2: MAKOR Q1 paper belt sprayer 3 circuits plus a cleaning circuit.Station #3: ...more

Weight9600 pounds, SERIAL. 12021, NEW. 1985, MODEL. OBS60-2, CAPAICITY. 66 TONS, STROKE. 4.72" / 120 MM, ADJUSTMENT. 2.76" / 70 MM, DIE HEIGHT. 11.81" / 300 MM TO BOLSTER, VARIABLE SPEED. 42 TO 85 SPM, SLIDE RAM DIMENSIONS. 17.72" X 13.78" / 450 X 350 MM, BOSTER DIMENSIONS. 32.43 X 21.62 X 3.74" / 900 X 550X 95 MM ...more

MFG. BY APV IN 1998; 3" PLATE PACK THICKNESS; 8" WIDE X 22" LONG PLATES;.

Plate type heat exchanger, manufactured by Mueller, model number ATI59FFF-10. Unit includes twenty-eight (28) plates measuring 41" long X 12" wide for a total surface area of approximately 95 square feet. Rated for 58 PSI @ 150 degrees Fahrenheit., Square Ft.: 95, Basis: FOB, Plate Materials: Stainless Steel, Number ...more

LENGTH OF PLATE. 257", WIDTH OF PLATE. 99-1/4", PLATE THICKNESS. 3", HEIGHT ON STAND. 25-1/4", SOLID STEEL. YES, WEIGHT OF PLATE ON STAND. 24,150 LB.

SERIAL. 5707-24, MODEL. 4-36, MAXIMUM WIRE DIAMETER.250" (1/4"), WIDTH RIBBON METAL. 1-1/4", MAXIMUM FEED WITH STOPS. 36", - SPLIT CAMS, - AIR CLUTCH, - 2 SIDED (DOUBLE) SLIDE GIBS, - 14 ROLL 2-PLANE STRAIGHTENER, - VERTICAL FORMING POST, - FRONT, REAR, LEFT AND RIGHT SLIDES, - POSITIVE STOCK CHECK, - AUTOMATIC LUBE ...more

Plate chiller, stainless steel construction, includes (2) plates where refrigerant will be pump through and water sprayed/cascade over the plates to cool product. Plates measure 30" wide x 60" long, includes stainless steel catch tank. previously used at food plant and appears to be in good condition., Basis: FOB ...more

NUMBER OF PLATES. 2, STACKABLE PLATES. YES, LOWER PLATE WIDTH. 16", HEIGHT LOWER PLATE. 16", T SLOTS. 3, UPPER PLATE WIDTH. 16", UPPER PLATE HEIGHT. 14", LOWER PLATE DEPTH. 16", THICKNESS OF PLATES. 1", T SLOT LOWER PLATE. 3, T SLOT CENTER. 5", OVERALL HEIGHT. 30", T SLOT DIMENSION. 3/4" X 1-1/2" X 1-1/2", CASTIRON ...more

16.5" HERO DINNER NAPKIN FOLDER, MODEL 4202, 2 LANE, 16.5" X 16.5" DINNER NAPKINS, 1/8 FOLD, BELT DRIVEN UNWIND, STEEL TO PAPER EMBOSSING, UPPER AND LOWER SLITTERS, BAND SAW WITH AUTO GRINDING, PRODUCTION 1200 PIECES PER MINUTE, NOT CURRENTLY IN OPERATION, Manufacturer HERO Model 4202 Year 2014 Condition Used Stock ...more

, 1200 Gallon Lee Stainless Steel Jacketed Tank Double Motion Mix Kettle. Jacket Rated 100 PSI @ 338 Deg.F. S/N- C4363A2. Dish Bottom, (4) Legs, Center Bottom Outlet, w/ Stacked Drives, Side Wall Double Motion Counter Rotating Scraper Agitator. 13'6" Overall Height. 4" Center Bottom Outlet. One drive motor ...more

LENGTH OF PLATE. 72", WIDTH OF PLATE. 48", PLATE THICKNESS. 8", PLATE IS ON STAND. YES, COLOR. BLACK.

SERIAL #3956-2. PLATEN L TO R OVERALL IS 26" AND F TO B BETWEEN POSTS IS 11". 7" DOUBLE-ACTING MAIN RAM WITH A 3" ROD. 2 \u00bd" DIAMETER POSTS. DAYLIGHT WITHOUT PLATENS IS 21", CURRENTLY SET UP WITH TWO 18" X 18" X 2" ELECTRIC PLATENS WITH STRIP HEATERS, RESULTING IN A 15" DAYLIGHT. APPROX 14" STROKE. FULLY GUIDED. ...more

Meinert P 620D/B-L 3000/1300 Min/Max Panel Width: 9.45" - 51.18" Min/Max Panel Length: 9.84" - 118.11" Max Panel Stack Height From The Ground: 62.99" Work Cycles/Minute: 18 Loading System: Vacuum/Suction Cups 112 m3/h Capacity IMA Combima II/650/A/R3 EVA Hotmelt Glue System Max Panel Width: 51.18" Max Feed Speed: ...more

LENGTH OF PLATE. 40", DEPTH OF PLATE. 18.5", HEIGHT OF PLATE. 34", DRILL & TAPPED HOLE. YES.

CAM-WOOD IAT 620-150HX INVERTER DRIVEN FINGER JOINT SYSTEM Lay-Up and Block-Staging Infeed Conveyor: -- 24" Wide x 31.5" long belt conveyor powered with 1/2 HP motors. The conveyor is controlled by the operating and system. Feeds at a constant rate of 180 FPM. Block delivery is controlled by the operator and machine ...more

NUMBER OF PLATES. 2, PLATE HEIGHT. 42", PLATE WIDTH. 24", LENGTH OF BASE.18.

Plate type heat exchanger, manufactured by APV Crepaco, Model R51TH, all stainless steel construction, approximately 1,100 sq. ft. surface area. Includes (240) plates measuring 16" x 61", with Rail length of 6'3", plate capacity 250 maximum, 4" sanitary clamp in/out. Serial# 33546. Previously used at food ...more

SCMI K230 Edgebander, Manufacturer (to be confirmed):, · Edgebanding thickness:.4mm - 3mm (.016-1/8”), · Guillotine capacity: 3.0mm, · Feed speed: 30 ft/min., · Panel height: 3/8” min – 1 15/16” max, · Minimum panel length: 5 1/2” ...more

Unused 18 x 27 ft (5.5 x 8.1 m) Citic Ball Mill with 5,500 HP (4,100 kW) 893 RPM WRIM induction motor., - Rubber liners, 2 sets, - High- and low-speed drive couplings, - Sole plates, Additional motor info:, -WRIM - 893 RPM, - 4160 Volt, - 3 Phase, - 60 Hertz.

CAM-WOOD TYPE F1, MODEL FAH 8" X 20’ AUTOMATIC HORIZONTAL FINGER JOINT SYSTEM - SINGLE CHAIN TYPE Technical : -- Working thickness: 17 mm to 60 mm (0.66" to 2-3/8") -- Working width: 25 mm to 205 mm ( 1" to 8") -- Maximum finish length: 6.2 Meters ( 20') -- Glue type: PVAC -- Timber moisture: 8% to 12% -- ...more

FABRICATED WITH 2" PLATE. TOP PLATE, BOTTOM PLATE AND FOUR CENTER UPRIGHT PLATES. (ITEM #668).

, used 220 Sq.Ft. ALFA LAVAL Plate Heat Exchanger/Pasteurizer. Type H7-RC. Unit has (44) 48" x 15.5" Plates is 3 Zones. Zone 1 has (10) Plates; Zones 2 and 3 have (17) plates each for approx 220 Sq.Ft total area. Unit rated 10 Bar (145 PSI) @ 285 Deg.F. End plates have 3" tri-clamp connections and (2) spacer plates ...more

Size 78"x96" Make GIDDINGS & LEWIS Year 1967, 78" X 96" GIDDINGS & LEWIS AIRLIFT ROTARY TABLE, S/N: 040-1087-67, NEW: 1967, PLATEN SIZE. 78" X 96", PLATEN HEIGHT. 18", NUMBER OF T-SLOTS. 7, WEIGHT CAPACITY OF TABLE. 50,000 LBS, APPROXIMATE WEIGHT OF TABLE. 17,750 LBS, - AIR LIFT, - 90 DEGREE SHOT PINS, - ...more

STANMAC SPRAY 300 Moulding Sprayer The Stanmac "Spray 300" is ideal for linear profiles in a wide range of materials and capable of utilizing both waterborne and solvent-based coatings including stains, paints, and lacquers.Spray guns are automatically timed for the start and stop of the spray cycle to ensure the best ...more