Buy or Sell Your 40 KW Generators

LOAD CAPACITY. 3300 LBS. - 1500 KG., SSUITABLE FOR COILS WITH APPROX. O.D. 33.5" - 850 MM., DANCER ARM SPEED CONTROL, 4 KW 220/440/480 VOLT 38 HERZ 60/50 CYCLE MOTOR.

Model: C100D6C | Power Output: 100kW | QuietConnect Series | 1800 RPM | 277/480V 3-Phase, Reliable Diesel Backup Power for Your Business, IN STOCK - Ready to Ship, When the power goes out, your business doesn't have to. The Cummins C100D6C diesel generator protects your operations ...more

Engine Information Engine Manufacturer:Cummins Engine Model:KTA19-G2 Engine S/N:37153429 Engine RPM:1800 Engine HP:600 Governor:Electronic Starter:Electric Cooling Method:Radiator Battery Charger:✓ Battery Rack:✓ Battery Cables:✓ Generator End Information kW Rating:400 kVa Rating:500 Rating Type:Standby Power ...more

Cummins 400 kW standby diesel generator set model DFCE, SN-K990020375. Cummins NTA855-G5 engine rated 605 HP at 1800 RPM, SN-30363560. 3/60/277480V, 12 lead reconnectable to other voltages. 800 Amp main-line circuit breaker. PMG - permanent magnet generator. New DeepSea digital control panel. Coolant heater. No ...more

6000 LB UNICARRIERS PROPANE FORKLIFT, Model MUG1F2A30LV, S/N UG1F2-9227757, New 2024, Stock# Q12226, 6000lb Capacity, LPG Fuel Source, 6' Forks, Triple Stage Mast, Side Shift, Independent Forks, Indoor/Outdoor Tires, 109 Hours., CATALOG : Rated Capacity 6,000 lb Mast Type Triple Stage Mast Lift Height 189" Fork Length ...more

2019 tubepro model #354M 4 function electro magnetic testing unit currently calibrated up-to-date for up to 3,5 inch tube maximum this one of a kind completely customized unit has a on board 20KW 240V single phase generator and electric air compressor has a operators control room on board storage pipe conveyor system ...more

400kW Doosan P180LE-1 Diesel Generator, Make: DoosanModel: P180LE-1Type: Diesel GeneratorHours: 84 HoursCondition: Used, Reported in Good ConditionPortable/Stationary: StationaryEnclosure: Paramount EnclosureEngine: Doosan P180LE-1 Diesel Engine Rotation Speed: 1800RPMDisplacement: 18.273LRadiator and Block Heater ...more

Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof ...more

Catalog :, Drive Rating: 4KWNormal Press Capacity: 7 MP 70 kNNormal Force of Bearing Unit: 3 MP 30 kNOutput (stroking rate) depending on gear ratio 800 1/ 1000 minFeed Length: 60mmFeed length extension: 80mmWidth of Strip: 30mm, 5 slidesBihler Payoff MH-2Air ClutchPress Slide480 VAC, Location: Lake Forest.

FIBER LASER CUTTING MACHINE: Laser Power 6kw Freight & Tariff Included Installation & Training Cost Included Transportantion By Sea Loading Container 2*40'HQ Payment Terms 30% down payment, 70% before shipment. Warranty Three years limited warranty for main parts. One year free labor. Optional list: iTrans ...more

Make: Manzoni, Model: E200 2MR/SL 200, Year: 2003, Machine Location: Upon Request, Tonnage: 220 Ton, Slide Bolster Size: 59.05″ x 39.37″, Bolster Size: 62.99″ x 39.37″, SPM: 50-150, Stroke Length: 2.95″, Bed Adjustment: 4.92″, Table Height: 43.31″, F. Opening Btwn. Upright: ...more

SKU: 152404, Model: TSD250-200/480+LXI, Year: 2019, Condition: Used, Type: DC, Electrical :, Output Capacity: 0-250 Volts, Voltage: 480 volts, Frequency: 50-400 Hz, Made In: UNITED STATES, Dimensions: 15.00 (H) x 20.00 (W) x 25.00 (L) inches, Additional :, Note: Black rack pictured is not included with individual ...more

Batteries are not included60KW Scalable to 80KW N+1APC InfraStruXure 80kW PDU Symmetra PX 80kW Battery Enclosure SYCF8BFModel Number: OG-PD80F6FK1-M1.Config Model: PSX-PDU120V#681307.Capacity: 80kW / 100kVA.Input: 208V, 3-Phase, 320A.Output: 120/208V, 3-Phase distribution34x30x82 48x40x88 700/75034x23x82 48x40x88 ...more

BAVELLONI ALPA 323-4 CNC Glass Machining Center 2300 x 3000 mm4-Axis CNC machining center capable of a nearly an unlimited variety of machining operations such as drilling, milling, edging, engraving and beveling of glass. The CNC utilizes a jet head which supplies water directly to the grind while other models just ...more

Cummins 100 kW standby (90 kW prime) diesel generator set model DSGAA, SN-E150828525. Cummins QSB7-G5 NR3 engine rated 324 HP at 1800 RPM, SN-73839645, EPA Tier 3 emissions. 3/60/277/480V. 200 Amp main-line circuit breaker. Oversized generator end rated 143 kW. Engine cooling radiator rated 50C/122F ambient. UL 2200 ...more

Reed Oven Co. Rotating 5-Rack Oven. Serial: R5173. 120V / 480V 60 Hz. Rack size: 56 in. x 26 in. with 0.75 in. wire spacing. Opening size: 56.75 in. W x 10.5 in. H. Previously used in a bread proofing application at a grocery store. Uninstalled February 2016 after the location shut down. Box dimensions: 90 in. deep x ...more

Model: HLX5Hours: 150 Hole Diameter Drilling: 43 - 64 mmHole Diameter: Reaming: 76 - 127 mmPower Class: 20 kWPercussion Rate: 67 HzOperating Pressure Percussion: 120 - 220 BarMax Rotation: 175 BarDrill Steels: R32, R39 or Hex 35 mm Drifter RodsShanks: 45 mm/T3B/R32/T35/R38/T45Weight: 210 kgLocation: Middle East.

The Fanuc A06B-0860 series Alpha 30/3000 is an AC spindle motor designed for use on CNC machine tools requiring high power density and tight servo integration. Rated at approximately 30 kW continuous output, the Alpha 30 platform is built around a four pole, three phase induction design with class H insulation and is ...more

Grieve Continuous conveyor belt oven, 18"W high carbon steel belt, 15"H clear, 178" long heated length, 850F. Electric heated, 460 Volt, 3 PH, 80 KW, 112 amps, Watlow EZ-ZONE temperature control, infinitely variable belt speed control, Watlow SCR element power control, vertical air flow, 5 HP belt driven recirculating ...more

s *CAPTIVE: 4852409C3.4BPS102 *CERTIFICATION AR *CONNECTION GP *CONNECTION GP G *END USE: EP RENTAL *EXCITER GPPERM * AR *GENERATOR ARPWR *OPTIONAL ANTICONDENSATION HEA *OPTIONAL BATTERY CHARGER UL10A *TRAILER GP W/ ELEC BRAKES *TRAILER HITCH OPTIONS 3 (76 *VOLTAGE INDICATOR 480V 60HZ *XQ60BM TIER 4F TOP LEVEL 480 3 ...more

Model: C30D6 - A063P963 | 30kW @ 120/240V Single Phase | 1800 RPM | Sound Enclosure + 24-Hr Subbase Tank, IN STOCK - Ready to Ship, Product Overview, The Cummins C30D6 Diesel Whole House Generator is a fully integrated power generation system engineered for optimum performance, reliability, and ...more

used- igasi ig1002 liquid ring vacuum pump advanced vacuum performance. (nash cl1000); suction flow 1200 - 2100 m3/h; vacuum 200 - 600 mm hg; maximum power 45kw (60hp). liquid temperature 20?c ph= 6, th= 18?; suction connection dn125; supply connection dn100; liquid ring connection; 1"g shaft diameter 70 mm. built ...more

Stock#: IE50-265-KH Fuel: Diesel Year: 2014 Voltage: 120/240 Volts Hours: 217 Hours Phase: 1 Phase Make: Kohler Model: 50REOZJD Serial: SGM3298HH Hertz: 60 Hz Wires: 4 Lead Kilo Watts: 50 kW Mounted: Skid Mounted Fuel Tank: Base Fuel Tank Enclosure: Sound Attenuated Enclosed: Enclosed Length: 110" Width: 41" ...more

Stock#: IE80-175-KH Fuel: Diesel Year: 2007 Voltage: 120/240 Volts Hours: 643 Hours Phase: 1/3 Phase Make: Kohler Model: 80REOZJD Serial: 2175630 Hertz: 60 Hz Wires: 12 Lead Kilo Watts: 80 kW Mounted: Skid Mounted Fuel Tank: Base Fuel Tank Enclosure: Sound Attenuated Enclosed: Enclosed Lead: Reconnectable Length: ...more

Stock#: IE60-288-SP Fuel: Diesel Year: 2002 Voltage: 120/208 Volts Hours: 281 Hours Phase: 1/3 Phase Make: Spectrum/Kohler Model: 60D8EJB Serial: 0736969 Hertz: 60 Hz Wires: 12 Lead Kilo Watts: 60 kW Mounted: Trailer Mounted Fuel Tank: Base Fuel Tank Switch: Selector Switch Enclosed: Enclosed Lead: Reconnectable ...more

WEINIG UNIMAT 23 E Feed Through Moulder, 6-head;Heavy Duty cast-iron construction - reduces vibrations for optimum surface quality.: -- Head configuration: 6-Head (B-R-L-R-T-B), working capacity 230 x 120 mm (9-1/16" x 4-3/4"). -- Spindle sequence: 1. Bottom 4 kW (5.5 HP), 2. Right and 3. Left share a 7.5 kW (10 HP) ...more

Grieve Continuous conveyor belt oven, 18"W high carbon steel belt, 15"H clear, 178" long heated length, 850F. Electric heated, 460 Volt, 3 PH, 80 KW, 112 amps, Watlow EZ-ZONE temperature control, infinitely variable belt speed control, Watlow SCR element power control, vertical air flow, 5 HP belt driven recirculating ...more

used- igasi liquid ring vacuum pump, model bv5/1. (nash 904 technology) suction flow 1200 - 2100 m3/h. vacuum 200 - 600 mm hg. power requirement 45kw (60hp) motor. liquid temperature 20?c. ph= 6, th= 18?; suction connection dn125, supply connection dn100 liquid ring connection. 1"g shaft diameter 70 mm. built 2022. ...more

Make: Plastic Process Equipment, Model: FX-100460, Year: 1900, Machine Location: Utah, – Air Flow: 100 CMH, – Dewpoint: -40C, – Drying Blower: 0.75kW, – Drying Heater: 6kW, – Regen. Blower: 0.18kW, – Regen. Heater: 4kW, – Processing Heater: Honeycomb Rotor, – Process ...more

Electra model 243139 Series RR with fixed corrugated alloy retort, 23"W x 23"H x 34"L work area, recirculating fan in rear, inert atmosphere, Honeywell temperature control & round chart recorder, solid state SCR element control, 480V, 3PH, 42KW, inert atmosphere flow control system, positive sealing swing-out door.

Generac 400 kW standby (360 kW prime) diesel generator set, model SD0400, SN-994921. Perkins engine rated 601 HP at 1800 RPM, SN-TGDF5332N02152A, EPA Tier 3 emissions. 3/60/120/208V, 12 lead reconnectable to other voltages. PMG - permanent magnet generator. 1200 Amp main-line circuit breaker. Generac H panel digital ...more

CEFLA - MITO,.Complete Spraying System with SORBINI Cleaning Brush.Reciprocating Feed Through System for Waterborne & Solvent-Borne Coatings: The max. flexibility and technology for the continuous spraying of any kind of raised panels.s: -- Machine designed with a solid structure: LASER 3D; full accessibility ...more

Used 47 CFM Matsui MJ3-50-U Dryer, W/ Hopper 4 kW Process Heater 3.2 kW Regen Heater Dew Point: -40C (86°F, 75% RH) Temp. Range: 176°F – 320°F 3 Cu/Ft (110 LBS) Drying Hopper Capacity Control Circuit: 100V 70 PSI Compressed Air Primary Conveying Distance: 30 FT Secondary Conveying Distance: 15 FT ...more

Used Generac 30 kW standby (27 kW prime) diesel generator set, model SD30, SN-3007654794. Perkins 404D-22TA engine rated 49 HP at 1800 RPM, SN-GR84695U991954F. 1/60/120/240V, non-reconnectable to other voltages. 150 Amp main-line circuit breaker. Generac digital H control panel. Battery charger. Coolant heater. Sound ...more

WEINIG RAIMAN PROFIRIP 450M And Combiscan EVO Luxscan Lumber Scanner SystemThe system is complete with: -- (1) Weinig lateral lumber feeder table to scanner head -- 12" wide rubber belted infeed -- Roller/Sweep type lateral conveyor with sequencing and buffer to scanner infeed -- (1) Weinig CombiScan EVO Luxscan Line ...more

New / Surplus Generac 48 kW standby natural gas / LP generator set model SG050NA, SN-3012795554. Generac 4.5L engine rated 75 HP at 1800 RPM, SN-3012926638, EPA certified. 3/60/120/240V, 12 lead reconnectable to other voltages. 200 Amp main-line circuit breaker. Engine cooling radiator rated 50C/122F ambient. DSE ...more

-Crucible Size: 90KG-1, -Maximum Width Casting Capacity: 6 1/2'' (160mm), -Maximum Thickness Casting Capacity: 1/2'' (12mm), -Volts: 220/240-50-60 CY, -Phase: 3, -Cycle: 50/60, -KW Power: 44, -AMP Power: 150, -Maximum Operating Temperature: 2300° F (1260°C), -Overall Dimension: 60'' x ...more

ELUMATEC DG 104 Twin Head CNC Cut-Off Machine For Window Profile FabricationElectronic double-head cut-off saw with automatic positioning of the mobile head via a DC motor controlled by numerical control. Pneumatic management of all angles up to 22-1/2 (external). 450 and 500 mm dia. blade capacity. This high quality ...more

Thickness Range: 2.65mm to 7.20mm, Shaft Diameter: 4.5", Abbey Etna 6KU API Consisting of:, Coil Storage Unit, Double Cone Uncoiler, Hold Down Roll, 5 Roll Sheet Straightener, 60HP DC Motor, Shear and End Welder, Under Ground Accumulator, Double Pinch Roll Pull Out Stand, Entry Guides, Abbey Etna 4 Forming Stands ...more

Available for purchase in Calgary, AB, this dual generator system s two Stamford Model Series Star generators (500-kVA/400-kW) with a 600-Volt output. Powered by MAN Rollo E2842E312 natural gas engines, the setup includes advanced ComAp PLC controls and is housed in a robust skid-mounted enclosure measuring 25' x ...more

used liquid ring vacuum pump, made by igasi model ig2002. (nash cl2000); suction flow 2400 - 3900 m3/h; vacuum 200 - 600 mm hg; maximum power 90kw (127.6hp) liquid temperature 20?c ph= 6, th= 18?; suction connection dn150; supply connection dn125; liquid ring connection; 1"g shaft diameter 90 mm. built 2022. our ...more

The Mitsubishi MDS-DH-CV-370 is a 30 kW power supply unit from the MDS-DH series, designed to supply DC bus voltage to Mitsubishi MDS servo drives and spindle drive modules in CNC machine tool applications. The nameplate identifies a three phase input rated 70A at 380 to 440V or 380V at 50/60 Hz, with a single phase ...more

Used 2022 Erbend EMS3220 Shear, Max Thickness (gauge) 14 gauge Length of Blade 10.5' Dimensions 1950 X 3750 X 1600 Weight 4,431 lbs Control CNC (NC) Spec Sheet, Cutting Length: 10.5 ft (3200mm), Mild Steel: 14 ga (2mm), Stainless: 18 ga (1.2mm), Aluminum: 3mm, Cut per minute: 35, Motor Power: 4Kw.

Model: PowerPlus PP070Input: 78.3 kVA (59.2 kWA), 480 VAC (400 VAC in parentheses), 3 Phase, 50/60 Hz, 94 Amps AC (85 Amps AC in parentheses)Output: 70 kW (63 kVA), 70 kVDC (63 kVDC), 1000 mADC (840 mADC)Circuit Breaker Rating: 25 KA Short Circuit Interrupt Capacity at 480VACAmbient Temperature Max: 40CTank Temp. ...more

FIBER LASER CUTTING MACHINE:, Laser Power, 3kw, Freight & Tariff Included, Installation & Training Cost Included, Transportation By Sea, Loading Container 2*40'HQ, Payment Terms 30% down payment, 70% before shipment., Warranty Three years limited warranty for main parts. One year free labor., Optional ...more

Used 15 liter A Barents Becomix Homogenizer Mixer, Model RW 15 CD, stainless steel construction, 24 liter total capacity, 15 liter working capacity, bottom mounted 4 kw homogenizer mixer,.55 kw top mounted anchor agitator with sidewall scrappers, vessel rated 2 bar at 134 c internal, jacketed for 4 bar at 142 c, 400 ...more

- Unused Outotec Ball mills, - Delivered to site, never installed or operated, - 2 units available, - 8.6 x 13.5 ft mill shell (3.2 x 5.6 m), - Trunnion supported ball mill, - Ring and pinion gear drive, - Mill drawings available, - 450 HP WEG motor (340 kW), - 575V, 60 Hz, 3 Ph, - 1800 RPM, - SF 1.0.