go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Buy or Sell Your 40 KW Generators

warning
AI-ranked results for 40kw - closest matches first

Okuma MIV0404-1-B1 Servo Drive Untested Surplus

MRO Exchange | Fairfield, IL
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Okuma
Product Manufacturer: Okuma MPN / Model: MIV0404-1-B1 Product Type: Dual-Axis AC Servo Inverter Drive Series: MIV Serial Reference: 1006-2232-009-014 Firmware Boot Version: B:1.08 Firmware Runtime Version: R:113 Unit Firmware Version: U:1.2 L-Axis Output: 4.0 kW M-Axis Output: 4.0 kW DC Bus Voltage: 300V DC Control ...more

47 KW Cummins #GGFE-5751092, Natural Gas Generator, 3 Phase, 277/480 V, 925 hours, 2006

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Cummins
Model: GGFE-5751092
Year: 2006
Used Cummins 47kW Natural Gas generator. This Standby power unit s a Weatherproof enclosure and has approximately 925 hours of use. It provides Three-Phase power at 120/208v and is ready to ship from our Jacksonville, Florida facility., Model: ESG642, Capacity: 47kW, Amps: 200, Phase: Three-Phase, Fuel Type: Natural ...more

30 KW Generac #2027789, liquid propane generator set, weather protected enclosure, 120/240 Volts, 725 hours, 1996, #089458

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Generac
Year: 1996
Used Generac 30kW Liquid Propane generator. This power unit s a Weatherproof enclosure and has approximately 725 hours of use. It provides Single-Phase power at 120/240v and is ready to ship from our Brighton, Colorado facility., Model: 5.7L, Capacity: 30kW, Phase: Single-Phase, Fuel Type: Liquid Propane.

30 KW Generac #90A04512-S, liquid propane generator set, weather protected enclosure, 120/240 Volts, 652 hours, #089457

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Generac
Used Generac 30kW Liquid Propane generator. This power unit s a Weatherproof enclosure and has approximately 652 hours of use. It provides Single-Phase power at 120/240v and is ready to ship from our Brighton, Colorado facility., Model: 2.6L, Capacity: 30kW, Volts: 120/240v, Phase: Single-Phase, Fuel Type: Liquid ...more

50 KW Industrial Engineering & Equipment #IE-50/60-R, Syltherm Temperature Control Unit, w/150 psi @ -100/450°F Heat Exchanger, 450°F, 480 V

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Industrial Engineering & Equipment
Model: IE 50/60 R
Used 50 kW Industrial Engineering Equipment Syltherm temperature control unit. 480 volt, 50 kW, 450F. Herzog hart corp Engineering #267-500-2-2. Heat exchanger 150 psi @ 450F; 150 psi @ -100F., INDUSTRIAL ENGINEERING EQUIPMENT 50 kW.

60 KW Caterpillar Olympian #D60P4S, diesel generator, single phase, 120/240 Volts, 634 hours

Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Caterpillar
Model: D60P4S
Caterpillar Olympian D60P4S 60kW Diesel Generator 634 Hours 1ph 120/240V (SKU: 113311), 30-Day Warranty & Functional Guarantee Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warrantyif it doesnt work as described, well make it right. Shipping ...more

10 KW Industrial Engineering & Equipment, Syltherm Temperature Control Unit, w/150 psi @ -100/450°F Heat Exchanger, 450°F, 480 V

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Industrial Engineering & Equipment
Used 10 kW Industrial Engineering Equipment Syltherm temperature control unit. 480 volt, 10 kW, 450F. Herzog hart corp Engineering #267-300-6-4. Heat exchanger 150 psi @ 450F; 150 psi @ -100F., INDUSTRIAL ENGINEERING EQUIPMENT 10 kW.

30 KW Kohler #30RZ62, Natural Gas Generator, 120/240 Volts, 1800 RPM, 1 phase, 30 kVA, 841 hours

Power Zone Equipment | Center, CO
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Kohler
Model: 30RZ62
Brand/Model: Kohler 30RZ62 : Used complete 30RZ62 generator set, 30kw, 1 phase, 125 amps, 120/240v with White four cylinder natural gas engine, hour meter reads 841 RPM: 1800 Volts: 120/240 Phase: 1 KW: 30.

MITSUBISHI MR-J2S-40B SERVO AMPLIFIER DRIVE 400W USED

iGAM | Detroit, MI
Seller: iGAM
Location: Detroit, MI
Mfr: Mitsubishi
Model: MR-J2S-40B
This listing is for a USED MITSUBISHI MR-J2S-40B., AC servo amplifier drive from the MELSERVO J2S series. Designed for precision motion control in industrial automation systems. Compatible with SSCNET III/H networks and HC-KFS motors., See photos for., Part No: MR-J2S-40B, Type: AC Servo Amplifier Drive, Condition: ...more

20 KW SWP #GS25, diesel, sound attenuated enclosure, on trailer, 240/208/480 Volts, 68 hours, 2018, on rent, #71071

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Swp
Model: GS25
Year: 2018
Used SWP 20kW Diesel generator. This power unit s a Trailer/SAE enclosure and has approximately 492 hours of use. It provides Three-Phase power at 277/480v and is ready to ship from our Brighton, Colorado facility., Model: 404D22G, Capacity: 60, Amps: 70, Phase: Three-Phase, Fuel Type: Diesel.

30 KW Industrial Engineering & Equipment, Syltherm Temperature Control Unit, w/150 psi @ -100/450°F Heat Exchanger, 450°F, 480 V

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Industrial Engineering & Equipment
Used 30 kW Industrial Engineering Equipment Syltherm temperature control unit. 480 volt, 30 kW, 450F. Heat exchanger 150 psi @ 450F; 150 psi @ -100F., INDUSTRIAL ENGINEERING EQUIPMENT 30 kW.

Gravel Slurry Pump, 6" suction x 4" discharge, 60 HP electric motor, rubber lined, 415 V.

Savona Equipment | Savona, BC
Category: Slurry Pumps
Seller: Savona Equipment
Location: Savona, BC
6in x 4in Gravel Pump, Type: Slurry PumpSuction: 6inDischarge: 4inRubber ImpellerRubber LinedExisting Liners and Impeller at 50% Comes with (2) New Rubber Liners and a New Impeller, Drive: Electric Motor Power Output: 45kW (60HP)Voltage: 415 Volts.

600 Amps WH Wfs Switch 5 KV 60 KV Bil Indoor Nema 1

National Switchgear - Circuit Breakers etc. | Lewisville, TX
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Manufacturer Westinghouse / Cutler Hammer Product Family WFS Type WFS Amperage 600A Voltage 5KV KA Rating 40KA Shipping Width 48 in Shipping Height 102 in Shipping Depth 66 in Shipping Weight 1700 lb.

70 KW Generac #0053920, standby Natural gas generator set, 277/480 Volts,Ford engine, 2006, #089664

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Generac
Model: 0053920
Year: 2006
Used Generac 70kW Natural Gas generator. This Standby power unit s a Sound Attenuated enclosure and has approximately 515 hours of use. It provides Three-Phase power at 277/480v and is ready to ship from our Jacksonville, Florida facility., Model: WSA1068, Capacity: 70kW, Amps: 60, Phase: Three-Phase, Fuel Type: ...more

600 Amp. Square D, HVL/cc, Metal-Enclosed Load Interrupter Switchgear, 15 KV, 2011

Veracity Asset Services Inc | Uxbridge, ON
Seller: Veracity Asset Services Inc
Location: Uxbridge, ON
Mfr: Square D
Model: HVL/CC
Year: 2011
Square D HVL/cc 15kV Metal-Enclosed Load Interrupter Switchgear – 600A, 40kAThis 15kV Square D HVL/cc load interrupter switchgear provides dependable medium-voltage switching performance for industrial and utility distribution systems. Rated 600A continuous with a 40kA momentary withstand rating and 25kA ...more

30 KW 33 KW Kohler #30R0ZJ61, Diesel Generator, 1 & 3PH, John Deere, 1322 Hrs

Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Kohler
Model: 30R0ZJ61
30KW 33KW Kohler Generator 30R0ZJ61 John Deere Diesel 1&3PH 1322Hrs TESTED 30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warrantyif it doesnt work as described, well make it right., Shipping & ...more

400 KW Kohler, Rehlko, diesel generator, 2003

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Kohler
Model: 6063TK35
Year: 2003
Used Kohler/Rehlko 400kW Diesel generator. This Standby power unit s a Open enclosure and has approximately 504 hours of use. It provides Three-Phase power at 277/480v and is ready to ship from our Jacksonville, Florida facility., Model: 6063TK35, Capacity: 400kW, Amps: 600, Phase: Three-Phase, Fuel Type: Diesel.

50 KW Industrial Engineering & Equipment #IE-50/60-L, Syltherm Temperature Control Unit, w/150 psi @ -100/450°F Heat Exchanger, 450°F, 480 V

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Industrial Engineering & Equipment
Model: IE-50/60-L
Used 50 kW Industrial Engineering Equipment Syltherm temperature control unit. 480 volt, 50 kW, 450F. Heat exchanger 150 psi @ 450F; 150 psi @ -100F., INDUSTRIAL ENGINEERING EQUIPMENT 50 kW.

60 HP 3550 RPM Teco Westinghouse #AEHH8N, electric driver, 2025

IronHub | Calgary, AB
Seller: IronHub
Location: LaCorey, AB
Mfr: Teco Westinghouse
Year: 2025
For sale: TECO Motors electric motor with a power rating of 60 HP (45 kW) and a speed of 3550 RPM. This model (AEHH8N) s a two-phase design and is currently in disconnected operational status. Built in 2025, the motor has a serial number of YHP722B347002. Located in LaCorey, AB, this unit is available for inspection..

400 KW Caterpillar #C15, standby diesel generator, open, 277/480 Volts, 166 hours, 2012

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Caterpillar
Model: C15
Year: 2012
Used Caterpillar 400kW Diesel generator. This Standby power unit s a Trailer/Enclosed enclosure and has approximately 166 hours of use. It provides Three-Phase power at 277/480v and is ready to ship from our Jacksonville, Florida facility., Model: C15, Capacity: 600, Amps: 800, Phase: Three-Phase, Fuel Type: Diesel.

400 KW Cummins #KTA19-G2, diesel generator, 480 Volts, 1950 hours, open skid mounted

Pacific Electric Power Generators | Mission Hills, CA
Seller: Pacific Electric Power Generators
Location: Mission Hills, CA
Mfr: Cummins
Model: KTA19-G2
Cummins KTA19-G2 Diesel 400 kW Generator, 480V, 1950 hours, Standby rated, Reconnectable to other voltages, MagnaMax / Marathon generator end, Good running, operating condition, Open, skid mounted, Unit is subject to prior sale.

APC #ACRC502, In-Row Cooling System, 600 mm Chiller Unit, (3) Blowers, 300 psig, 43 kW cooling cap., 380-415 V

Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Apc
Model: ACRC502
Keep your data center cool and efficient with the APC InRow ACRC502 cooling system. This CRAC unit, featuring a 600mm width and a 42U height, ensures optimal temperature control. Ideal for small to medium-sized setups, its chiller-based technology provides reliable cooling performance while saving energy.- Provides ...more

Sharples #PM70000, Decanter Centrifuge, Stainless Steel, 200 HP (4 available)

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Sharples
Model: PM70000
Used Sharples PM70000 Stainless Steel Decanter Centrifuge, Manufacturer: Sharples, Model: PM70000, Serial: 81-PM70000-42, Material of construction: Stainless steel, Main motor drive: 200 hp, Additional information: 200 HP main drive motor with 45 kW eddy current back drive. Lubrication pump system and some controls. ...more

Flottweg #Z4D-3/409 Sedicanter, Decanter Centrifuge, 316 Stainless Steel, 7,750 RPM, 40.2 HP

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Flottweg
Model: Z4D-3/409
used- flottweg model z4d-3/409 sedicanter decanter centrifuge. 316 stainless steel. max bowl speed 7750 rpm, 30 kw (40.2hp) main drive motor, 7.5 kw (10hp) back drive motor, gearbox, feed tube, lube system, vibration switch/isolators, guards, chutes and control panel. our freight specialists can assist you with door ...more

60 KW Generac #SG0060AG036, Natural gas / Propane generator, load tested, 120/240 Volts, 2 hours, 2010

Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Generac
Model: SG0060AG036
Year: 2010
Model: GeneracFuel type: NG/LPKW: 60Volts: 120/240Hours: 2Phases: 1Dimensions: 92x40x78Weight: 2500 lbs60KW Generac Generator 1PH 2Hrs! Nat Gas Propane TESTED (108318) 30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by ...more

240 KW Multiquip #QSL9-G3, diesel generator, trailer, sound attenuated enclosure, voltage selector switch, 11 hours, 2013

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Multiquip
Model: QSL9-G3
Year: 2013
Used Multiquip 240kW Diesel generator. This Prime power unit s a Trailer/SAE enclosure and has approximately 11 hours of use. It provides Voltage Selector Switch power at MULTI-TAP and is ready to ship from our Brighton, Colorado facility., Model: QSL9-G3, Capacity: 300, Amps: 800, Volts: Voltage Selector Switch ...more

400 KW Winpower #TAD1242GE, diesel generator sound attenuated enclosure mounted on trailer, 277/480 Volts, 290 hours, 2005, #089305

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Winpower
Model: TAD1242GE
Year: 2005
This Three-Phase generator runs on Diesel and comes with a 720 gallon tank, has an output of 277/480v, and is currently located in Brighton, Colorado., Unit #089305 has been carefully updated to meet our quality standards and has passed our thorough 31 Point Quality Assurance Certification., Model: TAD1242GE ...more

Sharples #PM70000, Decanter Centrifuge, Stainless Steel, 200 HP

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Sharples
Model: PM70000
Used Sharples PM70000 Stainless Steel Decanter Centrifuge, Manufacturer: Sharples, Model: PM70000, Serial: 81-PM 70000-41, Material of construction: Stainless steel, Main motor drive: 200 hp, Additional information: 200 HP main drive motor with 45 kW eddy current back drive. Lubrication pump system and some controls. ...more

440 KW Daewoo Doosan #PureCell-400, Natural gas generator set, 480 Volts, 3-phase, generators, 2012

Machine Tool Bids | Chicago, IL
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Daewoo Doosan
Model: PURECELL-400
Year: 2012
MACHINE, Fuel: Natural Gas, Output: 440kW or 440,000 Watts, Voltage: 480V/ 3 Phase, Generator Dimensions: 28'11" L x 8'4" W x 9'11" H.

563 HP @ 1150 RPM, Flender #SEN320X, Parallel Shaft Gear Reducer Gearbox, 468 RPM output, 2.45 :1 Ratio, 420 kW

Power Zone Equipment | Center, CO
Seller: Power Zone Equipment
Location: Center, CO
Mfr: Flender
Model: SEN320X
Brand/Model: Flender SEN320X : Used Flender SEN320X parallel shaft gear reducer gearbox with following s: • 563 HP Service Rating • 563 HP Catalogue Rating • 2.455:1 Ratio • 1150 Input Speed • 468.43 Output Speed • Service Factor • Weight 2,390 lbs • Dims HP: 563 RPM: ...more

Fanuc #M-420iA, 4-Axis robot, 40 kg 88lb. payload, palletizing, R-J3iB control

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Fanuc
Model: 4-AXIS ROBOT
used fanuc m-420ia industrial robot | 4-axis 40kg palletizing robot w/ r-j3ib control. 4-axis movement capabilities. 40 kg payload capacity. maximum reach of 1885 mm. linear motion speeds up to 4,200 mm/sec. repeatability within 0.5 mm. includes r-j30ib intelligent robot control system. includes dedicated ...more

340 KW Caterpillar XQ425, Mobile Generator Set, Diesel, 1800 RPM, 480V, 3325 hours, 2019

Wyoming Machinery - Cat | Gillette, WY
Seller: Wyoming Machinery - Cat
Location: Rock Springs, WY
Mfr: Caterpillar
Model: XQ425
Year: 2019
340KW @ 1800RPM 60HZ PRIME, EMCP 4.4 CONTROL PANEL, Online Owner's Manual, TRAILER MOUNTED ELECTRIC BRAKES, VIN# 7KUBB2425KJ087718.

60 KW Generac, diesel generator, John Deere 5030 engine, 1 phase, 669 hours

Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Generac
Model: GeneracEngine: John DeereFuel: DieselKW: 60Volts: 120/240Hours: 669 Phase: 1Dimensions: 93x40x80Weight: 3100 lbs Power your operations with the robust 60KW GENERAC John Deere Diesel Generator. This powerhouse is designed to meet your energy needs efficiently, with its 5030 1PH engine. Having only 669 hours of ...more

3.5" Oto Mills, Rafted Tube Mill Line w/ Mair Packaging Line, 6mm wall thickness, 10 ton Double End Mandrel Uncoiler, Horizontal Accumulator, (4) Forming Strands, 2006

National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Oto
Year: 2006
Tube Diameter: 3.5 inches, Max. Wall Thickness: 6 millimeters, Manufacturer: Oto Mills (Italy), Year: 2006, Complete Line with the Following Components:, 10 Ton Oto Mills Double End Mandrel Uncoiler, Entry Edge Guides, Semi Automatic Shear End Welder, Exit Edge Guides, Horizontal Accumulator, Pull Out Stand, Entry ...more

45 KW Kohler #45RZ72, Diesel Generator, 277/480 Volt, 1800 RPM, 3PH, 660 hours

Powerhouse Systems Llc | Niota, TN
Seller: Powerhouse Systems Llc
Location: Niota, TN
Mfr: Kohler
Model: 45RZ72
Kohler 45RZ72 diesel generator available with 660 hours. This unit is suitable for standby power, commercial backup power, industrial facilities, agricultural use, service shops, and other applications requiring reliable diesel generator power. Has surface rust, runs exceptionally., Manufacturer: Kohler, Model: ...more

53" 6-5/8" EMC #Giant-1350-3WRF, 3-Hd. Top Abrasive Planer, 128" x 54" belt, 7-1/6" knife diameter, 40 HP, 9-13/16" roll diameter, 30 HP, 35.4" pass line, 65.6 FPM, 2025, new

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Emc
Model: GIANT-1350-3WRF
Year: 2026
EMC GIANT 1350 3WRF Abrasive Planer with (3) Heads, Planer Head, Roller and Superfinishing PadTop of the line Heavy Duty Abrasive Planer from EMC. The series of GIANT machines are available in many configurations. Abrasive Planer has a helicoidal head with insert tooling.Useful working width 1,350 mm (53"). Working ...more

150 KW Cummins, Stationary Generator Set, 277/480 Volts

Industrial Diesel Inc | Decatur, TX
Seller: Industrial Diesel Inc
Location: Decatur, TX
Mfr: Cummins
Manufacturer: CUMMINS Model: 150 KW Serial Number: 45268828 Condition: Used : Restrapped 120/208 to 277/480 Enclosure Used Cummins 150kw genset. Category Specific Standby Power Rating: 150 kW Prime Power Rating: 480 kW Phase: Three Engine Fuel Type: Diesel Engine Manufacturer: cummins Engine Model: 6cta8.3.

Stoelting #Omni-Force-212, 12" x12" S/S conveyor belt washer, electric, wash, rinse, heated blow-off

Furnaces, Ovens & Baths, Inc | Clarkston, MI
Seller: Furnaces, Ovens & Baths, Inc
Location: Detroit, MI
Mfr: Stoelting
Model: OMNI-FORCE-212
Item 7553 Manufacturer: Stoelting Category: Continuous Type: Stainless Steel Belt Washer Heated: Electric Model Number: Omni Force 212 Serial Number: 832 Max. Temperature: 150°F W/R, 250°F Blow-Off Voltage: 460/3/60 Work Area: 12"W x 12"H Opening External Dimensions: 8'W x 9'H x 17'L Controls: ...more

Alfa-Laval #AVNX 930B-31G, Solid Bowl Decanter Centrifuge, Stainless Steel, 3250 rpm, single lead conveyor, 380 Volt

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Alfa-Laval
Model: AVNX
used- alfa laval avnx 930b-31g solid bowl decanter centrifuge. stainless steel on product contact parts. maximum bowl speed 3250 rpm. single lead conveyor with single row lined cake discharge ports with ware liners. approximate 30 kw (45 hp) 3/50/380 volt main drive motor, frame/casing. on 4 legs. previously used in a ...more

400 KW Pillar Industries #MK8, Induction Heating Power Supply, 3KHz, 0.95 PF, 499 KVA

National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pillar
Model: MK8
400KW Pillar Industries MK8 Induction Heating Power Supply, MANUFACTURER - PILLAR, MODEL - AB5555-4004/MK8, SERIAL NUMBER - S.0.36628 XO, KW - 400, KHz - 3, VOLTS - 480, FREQUENCY - 60, PHASES - 3, AMPS - 600, KVA - 499, P.F. - 0.95.

Bollegraaf #HBS-120S baler, approx 43" x 43" variable bale dimensions, 132 Ton force, 27-55 TPH, used

Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Bollegraaf
Model: HBS-120S
Year: 2007
90kW Electric Motor (Approx. 120HP), New in 2007, Bale Dimensions: 1100mm x 1100mm x Variable. (Approx. 43" x 43" x Variable), Baling Force: 119.7 MT (Approx. 132 US Tons), Capacity: 22.4 -50 MT/H (Approx 27 - 55 US Tons/Hr).

Xinda #PSHJ-50, Plastic Compounding Extruder, 50 mm Diameter, 45 KW, 460 V.

HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Xinda
Model: PSHJ-50
Inventory No. 0526-112-0001 Manufacturer Xinda Model No. PSHJ-50 Name Plastic Compounding Extruder Arrival Date 06-03-2026 Dimensions L x W x H (inches) 168 x 125 x 58 Capacity 3/60/460 Electrical 3/60/460 Weight (lb.) 5400 Category Plastics Condition Used Available Quantity 1 Serial No. 10-12 Item 45 Kw, 50 Mm ...more

Westfalia GEA #CRA500-06-777, disc stack nozzle clarifier, 90 kW motor, 380/400/420 V., 3-Ph., 60 Hz, belt driven, 2008

Sully Enterprises | West Jordan, UT
Category: Clarifiers
Seller: Sully Enterprises
Location: West Jordan, UT
Mfr: Gea
Model: CRA500-06-777
Year: 2008
Qty 1, Westfalia GEA CRA 500-06-777, Year 2008, 90kW Motor 380, 400, or 420V 3 phase 60Hz, Belt Driven, I believe this is a disc stack nozzle clarifier, Built in 2008, never installed until about 2021 and only slightly used in a pilot plant, If you are interested in this unit, please contact [email protected] and ...more

Makino #A61NX-5E, 5-Axis CNC horizontal machining center, Pro 5 Control, 28.7" X, 28.7" Y, 26.8" Z, 24000 RPM, 2016

Premier Equipment Inc | Altamonte Springs, FL
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Makino
Model: A61NX-5E
Year: 2016
Makino A61NX 5E (5-Axis) CNC Horizontal Machining Center (subject to buyer verification):Pallet Size (Metric Type) …………………………………………………. 400 mm x 400 mm 15.7″ x 15.7″Note: This pallet is for the ...more

10 KW Industrial Engineering & Equipment #IE-10/45-R, Syltherm Temperature Control Unit, 1-Stage, w/150 psi @ -100/450°F Heat Exchanger, 450°F, 480 V

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Industrial Engineering & Equipment
Model: IE 10/45 R
Used 10 kW Industrial Engineering Equipment Syltherm temperature control unit. Single stage. 480 volt, 10 kW, 450F. Heat exchanger 150 psi @ 450F; 150 psi @ -100F., 1990 INDUSTRIAL ENGINEERING EQUIPMENT 10 kW.

30 KW Industrial Engineering & Equipment #2E-30/30-SC, Syltherm Temperature Control Unit, w/150 psi @ -100/450°F Heat Exchanger, 450°F, 5 HP, 480 V

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Industrial Engineering & Equipment
Model: 2E-30/30-SC
Used 30 kW Industrial Engineering Equipment Syltherm temperature control unit. 5 HP 480 volt, 30 kW, 450F. Heat exchanger 150 psi at 450F; 150 psi at -100F. Catalog # 359X-0650, identification #A-92. Herzog hart corp Engineering model #2E-30/30-SC. Serial #10069., INDUSTRIAL ENGINEERING EQUIPMENT 2E-30/30-SC.

Alfa-Laval #SRPX-417-HGV-14CH, Stainless Steel Separator Centrifuge, hermetic, timed variable desludging, self cleaning, 3900 RPM, 30kw motor, 380 V. (3 available)

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Alfa-Laval
Model: SRPX-417-HGV-14CH
Used Alfa Laval SRPX-417-HGV-14CH stainless steel separator centrifuge. Hermetic design with timed variable desludging. Self cleaning. Bowl speed 3900 rpm. Refining capacity 30000 lbs PPH, water-wash 30000 PPH. 30 kW motor, 380 volt., UNIT WAS LAST USED ON SUNFLOWER OIL FOR DEWAXING, ALFA LAVAL SRPX-417-HGV-14CH.

3000 cu.ft./hr., Surface Combustion, endothermic gas generator, 1000 BTU/CF, 1875°F

Heat Treat Equipment Co | Canton, MI
Seller: Heat Treat Equipment Co
Location: Canton, MI
Mfr: Surface Combustion
Manufacturer: Surface Combustion, Type: RX (Endothermic) Gas Generator, Serial Number: BC-40932-1 (1801-02), Size: S-2-EN, Capacity: 3,000 CFH (2 retorts), Max Temp: 1875°F, Fuel: 480 Volts, 3-Phase, 60 Hz, 45 KW, Controls: Digital Controller & Overtemp, Standard Surface design with dual retorts, Air-cooled.

Herman #HIQ-Evolution, ultrasonic welder, 30 KW, 2009

Arlington Machinery | Lake Zurich, IL
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Herman
Model: HIQ-EVOLUTION
Year: 2009
Herrmann Model HIQ Evolution Ultrasonic Welder 30Kw 230 Volt, 24 Volt Control Type Hi-0 S/N SM9 361/09 New in 2009.

400 kW Cummins #DFCE-4491476, Diesel Generator, 3-Ph, NTA855G5 Engine, 829 Hours, 2000

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cummins
Model: DFCE-4491476
Year: 2000
used- cummins diesel generator400 kw, built in 2000 with 829 hours. package information: cummins dfce-4491476 ser no. k000177652. engine information: cummins nta855g5 ser no. 30365206.

240 KW Magnaplus #361PSL1606, Natural gas generator set, 480 Volts, 3-phase, 145 HP @ 1800 RPM, Cat 3306 engine, 2002

IronHub | Calgary, AB
Seller: IronHub
Location: Yellowhead County, AB
Model: 361PSL1606
Year: 2002
This listing s three natural gas generators, each rated at 80kW, totaling 240kW. Manufactured by CAT under the Magnaplus brand, these generators are housed in a skid measuring 14' x 32'. One generator has been stripped and is no longer attached to the building. Operational status is currently disconnected. ...more

190 -600 Ton, Vicla #Superior-Series, Hybrid Hydraulic Press Brakes, 6+1 Axis, 8'-20' Length Range, 11.8"-19.7" Throat, 15.7"-22.8" Daylight, 5.5-30 Kw, New

Comeq Inc | White Marsh, MD
Seller: Comeq Inc
Location: White Marsh, MD
Mfr: Vicla
Model: SUPERIOR SERIES
Vicla The SUPERIOR Series of hybrid- hydraulic press brakes represents the NEXT LEVEL TECHNOLOGY press-brake line., HEAVY DUTY, FAST, EXACT, PRODUCTIVE, SAFE, Hybrid press brake for dynamic production processes that require high speed, precision and versatility, The.SUPERIOR press brake represents the perfect mix ...more

375 KW Caterpillar #XQ425, mobile diesel generator set, 1800 RPM, 480 Volts, 8564 hours, 2019

Empire Power Systems | Phoenix, AZ
Seller: Empire Power Systems
Location: Henderson, NV
Mfr: Caterpillar
Model: XQ425
Year: 2019
Multiple units available. Used/New Call/Text Brett Lambeth 702:803:4881, *CAPTIVE: 5194400C13PS118, *CERTIFICATION AR, *ELECTRIC DRIVE TRAILER, *END USE: EP RETAIL, * AR, *GENERATOR AR POWER, *MODULE AR DEF, *MODULE AR EXH, *VOLTAGE INDICATOR 480V 60HZ, *XQ425 TIER 4 FINAL 480V, 105C TEMP RISE OVER 40C AMB, 60 HZ 340 ...more

Alfa-Laval #SRPX-417HGV-14CH, Stainless Steel Separator Centrifuge, 3/50 motor, 3900 RPM

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Alfa-Laval
Model: SRPX-417HGV-14CH
Used Alfa Laval model SRPX 417HGV-14CH stainless steel separator centrifuge. Soapstock application with water flushing. Radial peripheral ports and slide for intermittent solids discharge. Hermetic design with Hermetic inlet and outlet of light and heavy phases. Timer triggered variable ejection. Purifier rotor direct ...more

400 KW Baldor, towable generator, 3-phase, John Deere 6135 engine, enclosure

Industrial Diesel Inc | Decatur, TX
Seller: Industrial Diesel Inc
Location: Decatur, TX
Mfr: Baldor
ManufacturerBALDORModel400 KWSerial NumberG6135R015182ConditionUsedHours8,222Baldor 400kw enclosed unit on trailer. Ran good, see load report. Category SpecificStandby Power Rating400 kWPhaseThreeHertz60RatingStandbyEnclosedYesEngineFuel TypeDieselEngine Manufacturerjohn deereEngine Model6135Service ...more

Allen-Bradley, SMC-2, Smart Motor Controller Soft Start, 10 HP, 8.5-10 kW, 200 to 240 V, 50/60 Hz, 3 phase

Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Allen-Bradley
Allen-Bradley SMC-2 Smart Motor Controller Soft Start. Cat #150-A35NA-ND. Maximum HP rating: 10. Maximum kW ratings 8.5-10. Electrical requirement: 200 to 240V, 50/60 Hz, 3 phase.(ACN9).

Maxon Ovenpak LE #OPLE2SUNSSY1DCSN, size 15

American Industrial Sales LLC | Berlin, WI
Category: Biomass Burners
Seller: American Industrial Sales LLC
Location: BERLIN, WI
Mfr: Maxon
Model: OPLE2SUNSSY1DCSN
Used Maxon Ovenpak LE, Size 15, Size: 15, Model: OPLE2SUNSSY1DCSN, S.O. #: 979146, 480 V, 3 PH, 1.5 HP Combustion Fan, Max Capacity = 470 kW, Min Capacity = 9.4 kW, Max Turndown = 50:1, Burner will be shipped less mod motor and switches. These are available for added costs., Complete gas trains and controls are also ...more

30 KW Magnatek, Diesel Generator, 4236 engine, 330 hours

Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Magnatek
Item Located in: Truman, MN 56079Model: MagnatekEngine: PerkinsFuel: DieselKW: 30Dimensions: 114x89x49Weight: 4500 Model: MagnatekEngine: PerkinsFuel type: DieselKW: 30KWVolts:Hours: 320Phases:Dimensions: 114x89x49Weight: 4500Year:Belly Tank: Yes30KW DIesel Generator Magnatek Perkins 4236 TESTED intek Perkins 4236 ...more

400 KW Cummins #QSX15, standby diesel generator set, 3 phase, encl, 2124 hours

Industrial Diesel Inc | Decatur, TX
Seller: Industrial Diesel Inc
Location: Decatur, TX
Mfr: Cummins
Model: QSX15
ManufacturerCUMMINSModelQSX15Serial Number79257552ConditionUsedHours2,124Cummins 400kw genset. Powered by QSX15 engine with 2124 hours. Category SpecificStandby Power Rating400 kWPhaseThreeHertz60EnclosedYesEngineFuel TypeDieselEngine ManufacturercumminsEngine Modelqsx15Service LogsMiscellaneousloadreport2.pdf (Opens ...more

400 KW Generac #99A04846S, standby diesel generator, 120/208 Volts, Mitsubishi engine, 1999, #089606

Generator Source | Brighton, CO
Seller: Generator Source
Location: Brighton, CO
Mfr: Generac
Model: 99A04846S
Year: 1999
Used Generac 400kW Diesel generator. This Standby power unit s a Weatherproof enclosure and has approximately 851 hours of use. It provides Three-Phase power at 120/208v and is ready to ship from our Jacksonville, Florida facility., Model: 16.0L, Capacity: 2100, Amps: 1600, Phase: Three-Phase, Fuel Type: Diesel.

30 KW Caterpillar #XQ30, standby diesel generator set, Tier 4, sound attenuated enclosure, 120/240/208/277/480 Volts, 11268 hours, 2007, $9.5k

Turnkey Industries | Dickinson, TX
Seller: Turnkey Industries
Location: Dickinson, TX
Mfr: Caterpillar
Model: XQ30
Year: 2007
Please visit https://turnkey-industries.com/caterpillar-xq30-skid-mounted-diesel-generator-sn-cat00c33hn3x00297-hours-11268-shippack-pa/20260206_101339 for more, photos, and a spec sheet!.

Apron feeder, ~7.5' x 24', 40 HP, 900 TPH, 720 mm bed depth, dribble conveyor, Unused

D'Angelo International | Bellingham, WA
Category: Apron Feeders
Seller: D'Angelo International
Location: Bellingham, WA
- Unused apron feeder, - 2.4 x 7 meter, - 30 kW (40 HP) drive; 50 Hz, - Designed for 900 TPH, - 0.1 meter/sec operating speed, - 720 mm bed depth, - Includes dribble conveyor, - In storage, available now.

396 GPM, Ritz #65-200.2NF, cast iron centrifugal pump, 30 kW, 3" inlet, 2.5" outlet

Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ritz
Model: 65-200.2NF
Ritz Centrifugal Pump, Model 65-200.2NF - 3" inlet and 2.5" outlet, rated for 396 GPM. Powered by a 30 kW motor operating at 2955 RPM (415V). Serial number 336892., HP: 40, Basis: FOB, Contact Parts: Carbon Steel, Inlet and Outlet: 3" Inlet x 2.50" Outlet.

4 KW Onan #4.0 CCK-4R/13J, gas generator set, 120/208 Volts, 1800 RPM, 3 phase, 60 Hz

Savona Equipment | Savona, BC
Seller: Savona Equipment
Location: Savona, BC
Mfr: Onan
Model: 4.0 CCK-4R/13J
Onan 4 kW Gas GenSet. Model: 4.0 CCK-4R/13J. 120/208V.1,800 rpm. 3 phase.60 Hz.11.1A.: Electric or rope pull start.Outside fuel relay shut off., Please contact us for more information..

Alfa-Laval #SWPX-810-SGV-34-CGL, Desludger Disc Centrifuge, Stainless Steel, Food Grade, 7200 RPM, rebuilt, 2011

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Alfa-Laval
Model: SWPX-810-SGV-34-CGL
Year: 2011
used- alfa laval swpx 810-sgv-34-cgl desludger disc centrifuge. stainless steel construction (product contact areas), clarifier design (liquid/solid separation), max bowl speed 7200 rpm. 30 kw 400/3/50 drive motor. incl. foundation frame, set of tools and manual. previously used in a food application. new 2011. ...more

Trumpf #TruLaser-3040-(L32), CO2 Laser, 100 m/min., 4000 mm X, 2000 mm Y, 115 mm Z, 4.0 kW, 480 V, 2016

Aaron Equipment Co | Schaumburg, IL
Category: CNC Lasers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Trumpf
Model: TRULASER-3040-
Year: 2016
used- trumpf co2 laser, model trulaser 3040 (l32). with loadmaster automation. rated at speeds of 100m/min; 4000mm x 2000mm laser working area; x= 4000 mm, y= 2000 mm, z = 115 mm; 4000 watt co2 laser; automatic longitudinal pallet change; longitudinal conveyor; 17" color touch screen; work space lighting; position ...more

50 KW Kudu #57GEN, Natural gas generator set, 480 Volts, 3-phase, 250 HP, Industrial Irrigation GM 350 12yd engine, 2009

IronHub | Calgary, AB
Seller: IronHub
Location: Medicine Hat, AB
Model: 57GEN
Year: 2009
Available for sale is a Kudu model 57GEN natural gas generator with a power output of 50 kW and a maximum horsepower of 250. This portable unit, housed in a durable package, was manufactured by Industrial Irrigation in 2009 and s three phases with an operational frequency of 60 Hz. The generator has logged ...more

Carrier, Stainless Steel fluid bed dryer, 70" W x 30' L dryer bed, includes rotary valve discharge, 1998

Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Carrier
Year: 1998
Used Stainless Steel Carrier Fluid Bed Dryer. 69" wide x 29' long dryer bed. Serial #24429, new 1998. Includes rotary valve discharge. Includes gas fired burner and auxiliary 540 KW electric heat bank., 1998 CARRIER 70" x 29'.

Lancer #910LX, Glassware Washer, 23" L x 27" width x 58" H, 200-600 KPa, 10 kW, 10 Amps, 208 V, 2007

Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Lancer
Model: 910LX
Year: 2007
Item Dimensions - L X W X H - 23X27X58S6LLST5860Experience superior cleaning with the Lancer 910LX Glassware Washer, the ultimate solution for your laboratorys glassware cleanliness. This innovative washer is designed to handle a variety of glassware types, ensuring thorough cleaning and sterilization. Its ...more

450 KW, 1200 RPM, Kato #350SR9D, sound attenuated enclosure 00, plates

LarMar Industries Inc. | Midland, TX
Seller: LarMar Industries Inc.
Location: Midland, TX
Mfr: Kato
MANUFACTURER: Kato MODEL: Kato 450KW 1200rpm CONDITION: Used RPM: 1200 Serial No: 74325 Reference: UO836 Generator 450KW ,1200RPM KATO 350SR9D, 6P4-2350; 480V, 60hz; single bearing; SAE 00, plates,3 gauge analog panel. Removed from G398TA.

Fanuc Discharge Resistor Unit A06B-6089-H500 282 to 325V DC

MRO Exchange | Fairfield, IL
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
This is a Fanuc A06B-6089-H500 discharge resistor unit, a separate regenerative discharge resistor designed for use with Fanuc alpha series servo drive units including the SVU and SVUC series. The unit is rated for a DC bus input voltage of 282 to 325V and a rated power of 400W. The nameplate configuration diagram ...more

Akyapak #Meteor-1200, Beam Drill, Single-Spindle, 472.4" Work length, 2"-47" H x 2"-47" width Profile Size, 45 kW, 3000 RPM, 6-Station ATC

Machine Tool Technologies | Milwaukee, WI
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Akyapak
Model: METEOR 1200
Spec, AKYAPAK Meteor 1200.

400 KW, Marathon 433PSL6216 Magna Plus, 480 Volts, 12 lead,VR-SE350, w/warranty, new

Ring Power Systems | Saint Augustine, FL
Seller: Ring Power Systems
Location: Saint Augustine, FL
Mfr: Marathon
NEW Model 433PSL6216 Magna Plus, 480 Volt, 12 lead,VR-SE350 NEW -Optional NEW 600v Circuit Breaker, Shipped Not Installed 400 KW / 500 KVA RATING, 60 HERTZ 1800 RPM / 50 HERTZ 1500 RPM, STANDARD ONE YR MANUFACTURERS WARRANTY.

400 KW Kohler #400ROZD, diesel standby generator, 277/480 Volts, 949 hours, open skid, 1999

Powersafe Energy Services | Surrey, BC
Seller: Powersafe Energy Services
Location: Surrey, BC
Mfr: Kohler
Model: 400ROZD
Year: 1999
Hours: 949 Condition: Used Make: Kohler Model: 400ROZD kW: 400 Rating: Standby Voltage: 277-480V Fuel: Diesel Make Year: 1999 Kohler 400ROZD Open Skid Diesel Generator. Rated for 400kW, 480V, 60Hz, 3 Phase, 1800RPM. Includes: Analog Controller, Circuit Breaker, 200 Gallon External Fuel Tank..

60 KW Olympian #G60F3, natural gas generator set, weather enclosure

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Olympian
Model: G60F3
used- olympian natural gas generator, model g60f3. rated standby power 60 kw, 75 kva. weather enclosure. engine operates at 1,800 rpm. 3/60/120/208v. 163.2 hours run. serial# oly00000jngd01498, built 2008.

Bovone ELB-10, Vertical Glass Edge Grinder, 40 x 40 mm min. size, 2 - 30 mm thick, 0.35 - 5.4 m/min, 30 kW, 825 mm working H, 1999

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bovone
Model: ELB-10
Year: 1999
BOVONE ELB-10 Vertical Glass Edging Machine(10) Spindle straight grinder for edging with arrises for heavy duty production of medium/thin glass. The presence of (3) diamond grinding wheels on the edge allows working glass that is up to 30 mm thick. The cerium oxide felt in the last position ensures an excellent ...more

Biesse #Rover-24FT, router, 20 KW, vacuum pump, 2001

Machinery Scene | Toledo, WA
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Biesse
Model: ROVER-24FT
Year: 2001
Biesse Rover 24 FT Router, Series # 09665, Year: 2001, Power Supply: 20 KW, 480 V, 28 A., 60Hz., 110 24 Low Tensions, Air supply: 7 minimum Bar, Suction Air Speed: 30 M/1, Vacuum Pump, Additional photos and available, Price: $13,500, Price includes dismantling & loading.

De Danieli #C2002EI, Cooker, 200 liter, (2) speeds, 40-160 kg Product capacity, 400 V

Aaron Equipment Co | Schaumburg, IL
Category: Cooking Systems
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Danieli
Model: C2002EI
used- de danieli c2002ei cooker; 200 liter; 2 speeds; turn-over bowl by hand wheel drive; product 40 kg minimum, 160 kg maximum; 400/3/50 requirements.

SIP #Orion-5, coordinate measuring machine, 710x710x550mm envelope, Renishaw SP80, Renishaw PHC10-3 Plus

Liberty Machine Works | Preston, ID
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Sip
Model: ORION 5
This beautiful machine came out of an aerospace facility. It was moved into temporary storage while the shop made renovations to the facility, then later the decision was made to go with new equipment rather than moving this machine back into the shop., No PC is included, but it appears to be otherwise complete., SIP ...more

100 HP Toshiba #VFAS1-6900PL-HN, AC Variable Frequency Drive, 500-600 Volts

Savona Equipment | Savona, BC
Seller: Savona Equipment
Location: Savona, BC
Mfr: Toshiba
Model: AC VARIABLE FREQUENCY DRIVE
Model: VFAS1-6900PL-HN 75kW/500V-100HP/600V-90kW/690VLocation: Western Canada.

Biesse #Rover-24FT, router, 20 KW, vacuum pump, 2001

Machinery Scene | Toledo, WA
Category: CNC Routers
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Biesse
Model: ROVER-24FT
Year: 2001
Biesse Rover 24 FT Router, Series # 09665, Year: 2001, Power Supply: 20 KW, 480 V, 28 A., 60Hz., 110 24 Low Tensions, Air supply: 7 minimum Bar, Suction Air Speed: 30 M/1, Vacuum Pump, Additional photos and available, Price: $13,500, Price includes dismantling & loading.

450 KW Cummins #QSX15-G7 NR2, diesel stationary generator, sound attenuated enclosure, 277/480 Volts, 276 hours, 2002

Coastal Power & Equipment LLC | Pearland, TX
Seller: Coastal Power & Equipment LLC
Location: Pearland, TX
Mfr: Cummins
Model: QSX15-G7
Year: 2002
Condition: USED Great Condition Manufacture: Cummins Engine Manufacture: QSX15-G7 NR2 KVA/KW 562KVA 450KW Voltage: 3 P/277/480V/677 AMP Enclosure: SOUND ATTENUATED/ BASE TANK Category: Diesel Stationary Generator Fuel Type: DIESEL Year: 2002 Hours: 276 Location: PEARLAND, TX 77581 Unit #: CPEC450QSX15002 S#: WA532268 ...more

Sahinler #HPK-80, angle roll

Bud's Machine Tools | Murray, UT
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Sahinler
Model: HPK-80
Overview, Type:Misc Angle RollsManufacturer:SAHINLERModel:HPK 80Condition:Build To OrderStock #:1802Status:For Sale, ImperialMetricPower 5.4 hp 4 kW Top-Shaft Diameter : 80 mm, Bottom-Shafts Diameter : 70 mm, Rolls Diameters : 245 mm, Working Speed : 6 m/min, Motor Power : 4 kW, Weight : 1700 kg, Dimensions : ...more

30 KW Pillar #CE300, RF induction heating generator, 450 KHz, 70 KVA, 220/440 V., 3-phase

LR Environmental Equip Co | Los Angeles, CA
Category: Generator Type
Seller: LR Environmental Equip Co
Location: Los Angeles, CA
Mfr: Pillar
Pillar Induction Heater Model CE300, This Is An "AS IS" Item For Only $998.00, Be Sure To Inquire About All, 220/440V, 3Ph, 30 Continuous KW, 450Khz, 70KKva, PL. Voltage 11,500 Volt Unfiltered, 12,000V. Peak, RF Generator, Some Gauges Are Missing, Main Parts Intact - Tube and Main Transformer, Stock #761G.

Nova Pellet #N-Pico-Version-C, Pellet Mill, 50-100 kg/hr., 246 mm Die diameter, 118 mm Pressing Roller diameter, 10 kW, 2026

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Nova Pellet
Model: N-PICO-VERSION-C
Year: 2026
NovaPellet N-Pico pellet mill Designed for the Smaller Plants using Dry MaterialsOperating System: Mechanical and electric, with manual adjustment of pressure rollers for perfect positioning on the compression die. --Loading and Dosing: Material loaded through a hopper with adjustable manual shutter (optional) ...more

Bovone ELB-102, Vertical Glass Edge Grinder, 40 x 40 mm min. size, 2 - 30 mm thick, 0.35 - 5.4 m/min, 30 kW, 825 mm working H, 2015

Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bovone
Model: ELB-102
Year: 2015
BOVONE ELB-102 Vertical Glass Edging Machine(10) Spindle straight grinder for edging with arrises for heavy duty production of medium/thin glass. The presence of (3) diamond grinding wheels on the edge allows working glass that is up to 30 mm thick. The cerium oxide felt in the last position ensures an excellent ...more

Fanuc Discharge Resistor Unit A06B-6089-H500 282 to 325V DC m00484

MRO Exchange | Fairfield, IL
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
This is a Fanuc A06B-6089-H500 discharge resistor unit, a separate regenerative discharge resistor designed for use with Fanuc alpha series servo drive units including the SVU and SVUC series. The unit is rated for a DC bus input voltage of 282 to 325V and a rated power of 400W. The nameplate configuration diagram ...more

45 KW Kohler generator set, 1 phase, Prichart Brown enclosure, fuel tank base, 550 hrs.since new

Energy & Industrial Solutions | Rockledge, FL
Seller: Energy & Industrial Solutions
Location: Rockledge, FL
Mfr: Kohler
kohler 45 kw single phase,john deere engine,newage stamford generator,pritchard brown enclosure,fuel tank base only 550 hrs since new.

Flottweg #Z4E/4-901g, Solid Bowl Decanter Centrifuge, Alloy, single lead conveyor, 3200 RPM Bowl, 30 kW, 400 V, 2001

Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Flottweg
Model: Z4E/4-901G
Year: 2001
rebuilt- flottweg z4e/4-901g solid bowl decanter centrifuge. alloy 2.4602 construction (product contact areas); maximum bowl speed 3200 rpm; approximate single lead conveyor with welded hard facing; back drive with powerpack; feed pipe; lubrication system; adjustable liquid plate dams; approx. 30 kw; 400/3/50/2956 rpm ...more

Sprecher + Schuh Contactor CA7-60-00

MRO Exchange | Fairfield, IL
Seller: MRO Exchange
Location: Fairfield, IL
The Sprecher + Schuh CA7-60-00 is a 3-pole, non-reversing IEC motor contactor from the Series CA7 line, manufactured in Switzerland. The nameplate confirms an AC-1 rating of 690V at 100A and a 600V AC max rating of 90A enclosed per UL listing. Under AC-3 duty, the unit is rated 18.5 kW at 230V and 240V, and 30 kW at ...more

450 KW Cummins #DFEJ-QSX15-G9, Stationary Diesel Generator, 675 amps, 1800 RPM, 277/480 Volts, 1469 hours, 2007

American Energy Solutions | Katy, TX
Seller: American Energy Solutions
Location: Katy, TX
Mfr: Cummins
Model: DFEJ-QSX15-G9
Year: 2007
The 2007 Cummins DFEJ stationary diesel generator is a reliable power solution ideal for various applications, including aggregate and farming. This used model operates at a power output of 450 kW and is driven by a Cummins QSX15-G9 engine. It s a weatherproof enclosure, ensuring durability in diverse environments. ...more

Calow #S-55, peeling machine

Engen S.R.L | Udine, Europe
Seller: Engen S.R.L
Location: MANZANO, Europe
Mfr: Calow
Model: S-55
Year: 1984
PEELING MACHINE CALOW S-55, Manufacturer: CALOW, Model: S-55, Year: 1984, Working range Ø 8 – 55 mm. finished diameter - According to material grade, Bars length: 3 - 5 mt. with the current handling, Speed: Up to 10 mt./min.- According to peeling depth, Motor power: 45 kW, Tension: 400 V. - 50 Hz. ...more

11.5" width x 8" H x 21" D KH Huppert #12DFMPC1F, Furnace - Type ST, 2000 Degree, 2004

Scott Machinery & Supply Inc | Helena, AL
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
Mfr: Kh Huppert
Model: 12DFMPC1F
Year: 2004
Furnace Type ST, Model.12DFM PC1F, Inside Dimensions, Chamber Height.8", Chamber depth.21", Chamber width.11.5", Huppert Inf-Trol.2000 Degree, Volts.220sph, Amp.10kw, Single Phase, Freight charges are not included in sale price. Freight scheduling and costs are responsibility of the buyer. Packaging charges to ensure ...more

60 HP 3550 RPM Teco Westinghouse #AEHH8N, electric driver, 2025

IronHub | Calgary, AB
Seller: IronHub
Location: LaCorey, AB
Mfr: Teco Westinghouse
Year: 2025
Available for sale: TECO Motors electric motor with a power rating of 60 HP (45 kW) and a rated speed of 3550 RPM. This three-phase motor model AEHH8N is in excellent condition (Pasc-condition: a) and was built in the year 2025. The serial number for this unit is YHP722B3410001. Located in LaCorey, AB, Canada..

Eco Air #D102, rotary screw air compressor, 90 kW, 400 V., 3 Ph., 50 Hz, 10 Bar

Savona Equipment | Savona, BC
Seller: Savona Equipment
Location: Savona, BC
Mfr: Eco Air
Model: D102
Model: D102Working Pressure: 10 BarInput Power: 90 kWMotor Engine Speed: 2940 Rev/MinGross Weight: 1460Volt: 400Phase/Hz: 3/50Location: India.

80 KW Cummins #C80D6C, Diesel Commercial Generator, 134 gallon fuel tank, 1800 RPM, 120/208 Volts, 3-Ph.

Buckeye Power Systems | Cordova, TN
Seller: Buckeye Power Systems
Location: Cordova, TN
Mfr: Cummins
Model: C80D6C
Model: C80D6C | Power Output: 80kW | QuietConnect Series | 1800 RPM | 120/208V 3-Phase, 120/208V 3-Phase Diesel Standby Power Solution for Businesses, IN STOCK - Ready to Ship, When your business depends on uninterrupted power, the Cummins C80D6C diesel generator delivers the reliability ...more

1000 gallon US Pharmaceutical Equipment #FTM3800, Stainless Steel Jacketed Mixing Kettle w/ Scrape Agitation, 5'-2" diameter x 6' height, 5.5 kW mixing power, 40 RPM

EcReCon Inc. | Pedericktown, NJ
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: U.S. Motors
Model: FTM3800
Year: 2024
, (3) UNUSED 3800 Liter (1000 gallon) Electrically Heated Jacketed Mix Kettles with Sweep Scrape Agitation. Built by US Pharmaceutical Equipment. Model FTM3800. Heating power 48 KW. Mixing Power 5.5 KW. Mixer speed = 0-40 RPM. Approx. 11' OAH., 2024 US PHARMACEUTICAL EQUIPMENT 1000 Gallon Jacketed Kettle with ...more

60 KW Generac #0048132, Diesel Generator, 0D5825 engine, 1 phase, 60 KVA, 1800 RPM, 120/240 V, 123 hours, 2003

Quantum Technology | Shippensburg, PA
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Generac
Model: 0048132
Year: 2003
Belly tank has rust holes. Generator TESTED. Model: GeneracFuel type: DieselKW: 60Volts: 120/240Hours: 123Phases: 1Dimensions: 175x40x100Weight: 4960 30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day ...more