Buy or Sell Your 2000 KW Generators
AI-ranked results for 2000kw - closest matches first
40" x .0002" Hunter, foil rolling mill
National Machinery Exchange | Newark, NJ
Category: 2 High and 4 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hunter
, WIDTH: 457MM - 1016MM, ENTRY THICKNESS: 0.38MM, EXIT MAX/MIN THICKNESS: 0.3MM/ 2MM X 0.007MM, LINE SPEED: 730 MPM MAX, MAX COIL WEIGHT: 2000 KG., MILL DATA:, WORK ROLL FACE: 1016MM, WORK ROLLS DIAMETER: 228 MM, BACK-UP ROLLS DIAMETER: 559MM, 223.7 KW MOTOR DRIVE, UNCOILER DATA:, COIL ID: 270MM/400MM, COIL OD: 914MM ...more
200.0 KVA Eaton 93PM-200-4, 480 Volts 480 Volts uninterruptible power supplies system, 3-wire plus GND
Critical Infrastructure Group LLC | Sparks, NV
Category: Uninterruptible Power Supplies (UPS)
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Eaton
Eaton 93PM – 200 kW UPS System – 480V 3W, Rated: 200 kVA / 200 kW, Input Voltage: 480V VAC, 3 Phase, 3 Wire plus GND. 60 Hz, Input Configuration: Single Input, UPS Output: 480V VAC, 3 Phase, 3 Wire plus GND. 60 Hz, Maintenance Bypass: 3 Breaker Line and Match Maintenance Bypass, Dimensions: 46.7″ ...more
Daewoo Doosan #BVM-5700, vertical machining center, 41.3" X, 22.4" Y, 18.1" Z, 15000 RPM, LNS Chip Conv., Chip Blaster, 2022
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Daewoo Doosan
Model: BVM-5700
Year: 2022
Make: Doosan, Model: BVM 5700, Year: 2022, Machine Location: Upon Request, Axis Travel, X-Axis 1,050 mm / 41.3″, Y-Axis 570 mm / 22.4″, Z-Axis 460 mm / 18.1″, Spindle, Max Spindle Speed 15,000 RPM, Max Spindle Power ~37 kW (~50 hp), Taper / Tool Interface BT-40 / ISO #40, Table/Work Envelope, Table ...more
1200 KW Caterpillar #3512B Land Drill Module, Diesel Generator Set, 600 Volts 50 Hz
Integrated Energy Networks Llc | Dade City, FL
Category: 50 Hz Diesel Generators
Seller: Integrated Energy Networks Llc
Location: Dade City, FL
Mfr: Caterpillar
Model: 3512B
Year: 2015
CAT 3512B Land Drill Module, 1714 kVA (1200 kW), 600v. 50 Hz. Diesel Generator Set, Open Skids, SURPLUS, NEVER USED OR INSTALLED with the following configuration:, Heavy Duty Air Cleaner, Fuel Filter & Prime Pump, Simplex Oil Filter, Charging Alternator, Electric Starter, Jacket Water Heater, EMCP Panel, Generator ...more
Cat 966M, Wheel Loader, 14780 hours, S/N: EJA03236, 2020
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Wheel Loaders
Seller: N C Machinery Co. - Heavy Machinery
Location: Seattle, WA
Mfr: Caterpillar
Model: 966M
Year: 2020
AIR INLET STANDARD, RAIN CAP, ANTIFREEZE WINDSHIELD WASHER, ANTIFREEZE, -50C (-58F), AXLES, MANUAL/OPEN, ED, CAB TRIM, DELUXE (LHD), CERT EMISSIONS, EPA TIER 4, COOLING CORES, 9 FPI, COUNTERWEIGHT, 1000KG, ENG SN SYE34224 MSO 9FMND, FAN, STANDARD, FENDERS, ROADING, FILTRATION, STANDARD, FUEL ANTIFREEZE, -25C (-13F) ...more
330 Ton, Minster #MMC-SX2-3000G-SV, 2-pt servo press, 11.81" stroke, 21.6" Shut Height, 4.7" adj., variable speed, 43.3" x94.5" bed, 300 SPM, 2022
Nidec Press & Automation | Macomb, MI
Category: Gap Frame Double Crank Press Machines
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Minster
Model: MMC-SX2-3000G-
Year: 2022
SPM 300, Tonnage 330 tons, Stroke 11.81 inches, Shut Height 21.6 inches, Vari Speed (Yes/No) yes, Bed W 43.3 inches, Bed L 94.5 inches, Crank (Single/Double) double, Air Clutch (Yes/No) no, Main SX2-3000G-SV, Unit, Unit, Capacity, kN, 3000, US Tons, 330, Frame Type, Straight Side, Unitized Frame, Rated Tonnage Point ...more
Volpato #LBK-150-ST-1, Feed-Through Profile Sander, 150 x 2640 mm sanding belt, 5 to 25 m/min, 3 kW, 1980 x 250 mm front table
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Volpato
Model: LBK-150-ST 1
Year: 2022
VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL S: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, 30, 35,40, 45 50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) ...more
2500 KW Cummins #DQKAN, diesel generator set, 277/480 Volts, 3640 HP @ 1800 RPM, QSK60-G19 NR2 engine, EPA Tier 2, sound attenuated enclosure, 3750 gal. sub-base fuel tank, 2026, new
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DQKAN
Year: 2026
New Cummins 2500 kW standby (2250 kW prime) diesel generator set model DQKAN, SN-J250501011. Cummins QSK60-G19 NR2 engine rated 3640 HP at 1800 RPM, SN-33240295, EPA Tier 2 emissions. 3/60/277/480V. Oversized generator end rated 2840 kW. No circuit breaker, optional 3000 Amp or 4000 Amp breaker at additional cost. PMG ...more
1500 KW Caterpillar #3516, 277/480 Volts, 3-phase, 2299 hours, 2168 HP @ 1800 RPM, Kato 4P6-3300 generator end, open skid mounted, hydramechanical governor, 1993
NineX Power Systems | Spring, TX
Category: Diesel Generators
Seller: NineX Power Systems
Location: Miami, FL
Mfr: Caterpillar
Model: 3516
Year: 1993
Used CAT 3516 Generator Set; 1993 Model – 2299 Original Hours; 1500kW Standby Rated; 480/277V; Open Skid Mount; Engine Driven Radiator; Jacket Water Heater; Racor Fuel Filters; Electric Starter; Charging Alternator; Heavy Duty Kato Generator End; Controls and/or Breaker can be added for additional cost ...more
2500 KW Cummins #DQKAN, diesel generator set, 277/480 Volts, 3640 HP @ 1800 RPM, QSK60-G19 NR2 engine, EPA Tier 2, sound attenuated enclosure, 3750 gal. sub-base fuel tank, 2026, new
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DQKAN
Year: 2026
*****QTY 6 ETA Dec 31, 2026***** New Cummins 2500 kW standby (2250 kW prime) diesel generator set model DQKAN. Cummins QSK60-G19 NR2 engine rated 3640 HP at 1800 RPM, EPA Tier 2 emissions. 3/60/277/480V. Oversized generator end rated 2840 kW. No circuit breaker, optional 3000 Amp or 4000 Amp breaker at additional ...more
1500 KW Cummins #DQGAB, diesel generator set, 277/480 Volts, 230 hours, 2220 HP @ 1800 RPM, QSK50-G4 engine, Tier 2, 2000 gal. sub-base fuel tank, sound attenuated enclosure, 2011
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DQGAB
Year: 2011
Cummins 1500 kW standby (1350 kW prime) diesel generator set model DQGAB, SN-E110215517. Cummins QSK50-G4 engine rated 2220 HP at 1800 RPM, SN-25363491, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 2 x 2000 Amp main-line circuit breakers. PMG - Permanent magnet generator. UL 2200 ...more
750 kW Cummins #DQFAA, Diesel Generator, 1490 HP #QST30-G5 engine, Tier 2, 480 Volts Capable, sound attenuated enclosure 2, UL2085 Tank, 792 hours, 2007
Aaron Equipment Co | Schaumburg, IL
Category: Diesel Generators
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cummins
Model: DQFAA
Year: 2007
used-750 kw standby (680 kw prime) cummins diesel generator set, model dqfaa, sn-h070098040. cummins qst30-g5 engine rated 1490 hp at 1800 rpm, sn-37229540, epa tier 2 emissions. 3/60/120/208v, 12 lead reconnectable to 480v and other voltages. 2500 amp 100% rated main-line circuit breaker. pmg permanent magnet ...more
750 KW Cummins #DQFFA, diesel generator set, 277/480 Volts, 468 hours, 1490 HP @ 1800 RPM, QST30-G5 NR2 engine, EPA Tier 2, sound attenuated enclosure, 2007
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DQFFA
Year: 2007
Cummins 750 kW standby (680 kW prime) diesel generator set, model DQFAA, SN-H070098040. Cummins QST30-G5 engine rated 1490 HP at 1800 RPM, SN-37229540, EPA Tier 2 emissions. 3/60/120/208V, 12 lead reconnectable to 480V and other voltages. 2500 Amp 100% rated main-line circuit breaker. PMG permanent magnet generator. ...more
JUST ADDED!
1400 KW Caterpillar #3512B, Towable Diesel Generator, 2500 amp floor standing breaker, 40' sound attenuated container, 1200-gallon double wall fuel tank, 1800 RPM, 480 Volt, 821 hours, 1998
Penca Equipment Llc | Miami, FL
Category: Diesel Generators
Seller: Penca Equipment Llc
Location: Miami, FL
Mfr: Caterpillar
Model: 3512B
Year: 1998
Caterpillar 3512B Diesel Power Module Serial Number: 6WN00220Condition: UsedOperating Condition: OperableHours: 821 (Accurate / Verified)Year (DOM): 1998, Power & Electrical Standby Rating: 1,400 kW, Prime Rating: 1,275 kW, Phase: 3 Phase, Voltage: 480 V, Frequency: 60 Hz, Speed: 1800 RPM, Current Rating: 2,500 A ...more
11" x 45" x 45" SMS Demag, 6Hi Reversing Cold Rolling Mill, coolant, PLC, 2002, modernization in 2010
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sms
Year: 2002
TYPE:6-HI, BUILT:2002, MODERNIZATION IN 2010, ROLLED MATERIAL:CARBON STEEL SAE1006, S235-S550, C45-C75, IF, STRIP WIDTH MAX.: 1150 MM, THICKNESS:IN 3.5 MM OUT 0.30 - 2.5 MM, SPEED MAX.: 1000 M/MIN, COIL I.D./O.D.508 MM / 2000 MM, ROLL SEPARATION FORCE 800 TON, MAX. TENSION 9000 KG, BACKUP ROLL DIAMETER: 1050 MM - 1150 ...more
SRC Systems Limited #1300-Doctor, reversible rewinder,shaftless unwind,new
Global Equipment International | Chalfont, PA
Category: Paper Slitters and Rewinders
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Src
Model: 1300-DOCTOR
200207, One (1) New 40" - 60" SRC Systems Ltd. 1300 Doctor Machine, Reversible direction winding, Web width up to 60" (1600mm), Parent roll diameter; 40" (1000mm), Parent roll max weight; 2200Lb (1000Kg), Shaftless unwind; floor pick up, Tension control; Dancer arm, Tension range: 2.2 - 55.1Lb (1 - 25Kg), Web guide; ...more
1 Ton, Hyundai #HT-D100, Electric Chain Hoist w/Motor-Driven Trolley, dual speed, 13.1' lift, 21.3/10.6 FPM, 480 V., 3PH
Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Hyundai
Model: HT-D100
SKU: 29754, Model: HT-D100, Condition: Used, Hoist Max Lift Capacity: 1000 kg, Hoist Speed: Dual Speed, Mount: Trolley, Electrical :, Voltage: 480 volts, Phase: 3-phase, Dimensions: 30.00 (H) x 36.00 (W) x 25.00 (L) inches, Additional :, Hoist Speed: 6.5 / 3.25 m/min (21.3 / 10.6 fpm), Traversing Speed: 10 m/min (32.8 ...more
Cat 966M, Wheel Loader, 8300 hours, S/N: EJA03539, 2021
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Wheel Loaders
Seller: Wagner Equipmet - Heavy Machinery
Location: Bloomfield, NM
Mfr: Caterpillar
Model: 966M
Year: 2021
2021 CATERPILLAR 966M LOADER, 24V,2-1400CCA, 145 AMP SYSTEM, 7" COLOR TOUCH-SCREEN DISPLAY, 8300 GD 5/8/25, 966M WHEEL LOADER, AS IS / AS RECEIVED, AUTO IDLE/SHUT DOWN, IBS BRAKES, AXLES, MANUAL/OPEN, ED, BKTA GP ST 127" 5.50YD3 PO, CAB TRIM, COMFORT (LHD), CAP GP, RAIN, CLEAN EMISSION MODULE TIER 4FIN, COOLING CORES ...more
Cat 966M, Wheel Loader, 6758 hours, S/N: KJP01262, 2016
Hawthorne Cat | San Diego, CA
Category: Wheel Loaders
Seller: Hawthorne Cat
Location: Lakeside, CA
Mfr: Caterpillar
Model: 966M
Year: 2016
AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), AXLES, LOCK/OPEN, ED, BUCKET-GP, 127" 5.50YD3 (QC), CAB ROOF, NON-METALLIC, CERT EMISSIONS, EPA TIER 4, COOLING CORES, 6 FPI, COUNTERWEIGHT, 1000KG, COVER, HVAC, NON-METALLIC, CUTTING EDGE, BOLT-ON, FAN, STANDARD, FENDERS, STANDARD, GUARD, POWERTRAIN, HYDRAULIC ...more
CMS Tecnocut #Idroline-S2040, 5-Axis CNC waterjet, like new, 2019
Machinery Network Inc | Encino, CA
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Cms
Model: IDROLINE-S2040
Year: 2019
THE IDROLINE S 2040 WATERJET, CUTTING SYSTEM CONCEIVED AND MANUFACTURED, AS A MACHINE TOOLS. ESPECIALLY SUITABLE FOR INTENSIVE USE AND MEDIUM/TIGHT TOLERANCES., AN OUTSTANDING COMPROMISE OF ACCURACY,RELIABILITY AND TOP PERFORMANCE, IDROLINE S, IS IDEAL FOR ANY KIND OF FABRICATION PROCESS., IT ALSO PERFECTLY FITS ...more
2500 KW Cummins #DQKAN, diesel generator set, 277/480 Volts, 3640 HP @ 1800 RPM, QSK60-G19 NR2 engine, EPA Tier 2, sound attenuated enclosure, 3750 gal. sub-base fuel tank, 2026, new
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DQKAN
Year: 2026
*****ETA Aug 3, 2026***** New Cummins 2500 kW standby (2250 kW prime) diesel generator set model DQKAN. Cummins QSK60-G19 NR2 engine rated 3640 HP at 1800 RPM, EPA Tier 2 emissions. 3/60/277/480V. Oversized generator end rated 2840 kW. No circuit breaker, optional 3000 Amp or 4000 Amp breaker at additional cost. PMG - ...more
2500 KW Cummins #DQKAN, diesel generator set, 277/480 Volts, 3640 HP @ 1800 RPM, QSK60-G19 NR2, EPA Tier 2, sound attenuated enclosure, 3750 gal. sub-base fuel tank, 2026, new
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Milwaukee, WI
Mfr: Cummins
Model: DQKAN
Year: 2026
New Cummins 2500 kW standby (2250 kW prime) diesel generator set model DQKAN, SN-J250501010. Cummins QSK60-G19 NR2 engine rated 3640 HP at 1800 RPM, SN-33240138, EPA Tier 2 emissions. 3/60/277/480V. Oversized generator end rated 2840 kW. No circuit breaker, optional 3000 Amp or 4000 Amp breaker at additional cost. PMG ...more
Bystronic #I.G.-2745-R-L, Insulated Glass Line, 106" x 177" glass size, R-L, 15 mm glass thick, 13/16" width spacer, 48 MPM, 2011
Ex-Factory | Charlotte, NC
Category: Insulated Glass Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bystronic
Model: I.G. 2745 R-L
Year: 2011
BYSTRONIC / LISEC I.G. 2745 R-L Insulating Glass Line - 2700 x 4500 mm (106"; x 177";)Complete BYSTRONIC Production Line for the production and assembly of insulating glass units. Offers high-quality gas-filled IG manufacturing with an excellent cost to performance ratio. Maximum glass size: 2700 x 4500 mm (106"; x ...more
41" Hitachi-Seiki #ZR33SC-41, Sendzimir 20HI Cold Reversing Mill, 1000 FPM
National Machinery Exchange | Newark, NJ
Category: Sendzimir Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hitachi-Seiki
Model: ZR33SC-41
Manufactured By Hitachi - Japan, Major Mechanical / Electrical Upgrade by I2S USA IN 1996, Electrical Upgrade by I2S USA Completed in 2013, Thickness Range: 3mm -.075mm (.120" -.003"), Max Speed: 300 Meters/Min (1000 FPM), Max Strip Width: 1040mm (41"), Min Strip Width: 500mm (20"), Winder ID: 610 mm (24"), Max Winder ...more
Chevalier, 2-Axis CNC milling macihne w/Acu-Rite G2 Control, 10" x50" table, 3 HP, R-8, 2008
Hariton Machinery Co Inc | Bridgeport, CT
Category: CNC Vertical Bed Mills
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Chevalier
Year: 2008
Table Size 254mm x 1,270mm (10" x 50") Longitudinal Travel 760mm (30") Cross Travel 390mm (15 3/8") Vertical Travel (knee) 380mm (15") Table T-Slots Quantity 3/ Size 16mm (0.63") Maximum Workpiece Weight 430 Kg (946 Lbs.) Vertical Spindle Motor 3 HP Spindle Speeds 50-4,500 RPM Spindle Taper R8 Spindle Nose to Table ...more
Cat 966M, Wheel Loader, 2900 hours, S/N: EJA03501, 2021
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Wheel Loaders
Seller: Foley Equipment - Heavy Machinery
Location: Call Foley, KS
Mfr: Caterpillar
Model: 966M
Year: 2021
;- FOLEY WORK READY -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, AIR INLET STANDARD, RAIN CAP, AXLES, LOCK/OPEN, ED, CAB TRIM, COMFORT (LHD), COOLING CORES, 9 FPI, COUNTERWEIGHT, 1000KG, FAN, STANDARD, FENDERS, BASIC +, FILTRATION, STANDARD, GUARD, POWERTRAIN, HOOD, NON-METALLIC ...more
GMP #Cable Pony, Hydraulic Winch, 1000 kg Pulling capacity, 0-250 bar Tension Indicator, 88 mm Bore & 64 mm Stroke Engine, 11.7 HP, 3600 RPM, 2013
Lenmark Industries | Langley, BC
Category: Power Winches
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Gmp
Model: CABLE PONY
Year: 2013
SKU: 107865, Model: Cable Pony, Year: 2013, Condition: Used, Dimensions: 56.00 (H) x 57.00 (W) x 102.00 (L) inches, Additional :, V.I.N.: 1G9BU1010DT418046, GVWR: 625 kg (1378 lb), GAWR All: 998 kg (2200 lb) per axle, Max. Pulling Capacity: 1000 kg, Winch Tension Indicator: 0-250 bar, Tire and Loading Information ...more
1250 KW Cummins #DQGAA, diesel generator set, 277/480 Volts, 610 hours, 2220 HP @ 1800 RPM, QSKTA50-GE engine, EPA Tier 2, open power unit, 2008
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DQGAA
Year: 2008
Cummins 1250 kW standby (1100 kW prime) diesel generator set model DQGAA, SN-H080200083. Cummins QSK50-G4 engine rated 2220 HP at 1800 RPM, SN-33174562, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 2000 Amp main-line circuit breaker. PMG - Permanent magnet generator. Oversized ...more
1500 KW Cummins #DQGAS, diesel generator set, 277/480 Volts, 1800 RPM, QSK50 engine, Tier 4F, PowerCommand ctrl, open skid, 2022 (3 available)
ARC Power Systems | Burbank, CA
Category: Diesel Generators
Seller: ARC Power Systems
Location: Burbank, CA
Mfr: Cummins
Model: DQGAS
Surplus New 2021/2022 year Cummins DQGAS model Tier 4 Final certified commercial generator sets built with the QSK50 engine. Fully integrated package with PowerCommand controls, PMG excitation, and Cummins aftertreatment—ideal for standby, prime, or continuous duty applications., 3 new units available from ...more
Frank Bacon #ITS-20000H-ST, Vibration System, 44,000 lbf (200 kN) Sine Force Rating
Frank Bacon Machinery Sales | Warren, MI
Category: Vibration Testers
Seller: Frank Bacon Machinery Sales
Location: Warren, MI
Mfr: Frank Bacon
ITS-20000H-ST Vibration Test System, Frank Bacon Model ITS-20000H-ST Vibration System, Sine Force Rating: 44,000 lbf (200 kN)Random Force Rating: 44,000 lbf (200 kN)Shock Peak Force Rating: 88,000 lbf (400 kN)Peak to Peak Displacement: 76 mm (3.00”)Frequency Range (Hz): 2 – 2,100 MaxArmature Diameter: 650 ...more
1500 kW Cummins #DQGAB, Diesel Generator, 2220 HP #QSK50-G4 engine, Tier 2, PMG, sound attenuated enclosure, UL2085 Fuel Tank, PowerCommand ctrl, 770 hours, 2011
Aaron Equipment Co | Schaumburg, IL
Category: Diesel Generators
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cummins
Model: DQGAB
Year: 2011
used-1500 kw standby (1350 kw prime) cummins diesel generator set model dqgab, sn-g110233080. cummins qsk50-g4 engine rated 2220 hp at 1800 rpm, sn-25366503, epa tier 2 emissions. 3/60/277/480v, 12 lead reconnectable to other voltages. 2500 amp main-line circuit breaker. pmg - permanent magnet generator. oversized ...more
1500 KW Cummins #DQGAB, diesel generator set, 277/480 Volts, 753 hours, 2220 HP @ 1800 RPM, QSK50-G4 engine, EPA Tier 2, sound attenuated enclosure, 2750 gal. sub-base fuel tank, 2011
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DQGAB
Year: 2011
Cummins 1500 kW standby (1350 kW prime) diesel generator set model DQGAB, SN-G110233080. Cummins QSK50-G4 engine rated 2220 HP at 1800 RPM, SN-25366503, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 2500 Amp main-line circuit breaker. PMG - Permanent magnet generator. Oversized ...more
Danieli Lynx #TMR-185-225, hammermill shredding system
Alan Ross Machinery Corp | Zion, IL
Category: Shredders
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Danieli
Model: TMR-185-225
Year: 2009
(Located in the United States), SYSTEM RATED** BY OEM FOR:, - 40 - 50 TPH @ AVG 75% FE CONTENT, - 90 TPH SURGE MATERIAL FLOW CAPACITY, - 50,000 TONS PER YEAR *ANTICIPATED* "NORMAL" YEARLY PRODUCTION BASED ON 50% AUTO BODIES & 50% MIXED LIGHT IRON, -.8 TO 1.1 T/M(3) DENSITY, - 18 - 24 KWH PER TON POWER CONSUMPTION ...more
3000 KVA Caterpillar #C175-16, generator set, sound enclosure, 400 Volts, 50 Hz, 94 Hours
NineX Power Systems | Spring, TX
Category: 50 Hz Diesel Generators
Seller: NineX Power Systems
Location: Esbjerg, Europe
Mfr: Caterpillar
Model: C175-16
Year: 2016
Very Low Hour CAT C175-16 3000kVA Generator Set; Sound Enclosure; Immaculate Condition – 94 Original Hours; 3000kVA Standby Rated; 50Hz; 400V; EMCP 4.2 Control Panel; 5000A Breaker; Six Units In Stock – Immediately Available, GENERATOR SET: Manufacturer : Caterpillar Manufacturer : Caterpillar Package ...more
Cat 966M, Wheel Loader, 11841 hours, S/N: KJP00838, 2015
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Wheel Loaders
Seller: Wagner Equipmet - Heavy Machinery
Location: Aurora, CO
Mfr: Caterpillar
Model: 966M
Year: 2015
2015 CATERPILLAR 966M LOADER, AS IS / AS RECEIVED, AUTOLUBE, AXLES, LOCK/OPEN, ED, AOC, BUCKET-MH, 5.25 CYD, CAB AR, STANDARD, CAB ROOF, NON-METALLIC, CERT EMISSIONS, EPA TIER 4, COOLING CORES, 6 FPI, COUNTERWEIGHT, 1000KG, COVER, HVAC, NON-METALLIC, DIFFERENTIAL LOCK, GP BOOM, ENGINE,C9.3, 276HP, TIER 4IV ...more
2500 kW Cummins #DQKAN, Standby Diesel Generator, 3640 HP #QSK60-G19 NR2 engine, Tier 2, sound attenuated enclosure, UL 2200, PowerCommand 3.3 ctrl, warranty, 2025
Aaron Equipment Co | Schaumburg, IL
Category: Diesel Generators
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Cummins
Model: DQKAN
Year: 2025
unused- cummins model dqkan 2500 kw standby (2250 kw prime) diesel generator set. cummins qsk60-g19 nr2 engine rated 3640 hp at 1800 rpm, epa tier 2 emissions. 3/60/277/480v. no circuit breaker, optional 3000 amp or 4000 amp breaker at additional cost. pmg - permanent magnet generator. ul 2200 listed package. high ...more
SJMC #3MB9817, vertical honing machine, 35-170mm hole honed diameter, 320mm hole honed depth
MachTrade | Las Vegas, NV
Category: Vertical Hones
Seller: MachTrade
Location: Las Vegas, NV
Mfr: Sjmc
Model: 3MB9817
The machine is mainly used for honing single line engine cylinders and V-engine cylinders of automobiles motor cycles and tractors and also for other machine element holes., 1.The machine table can shift of the fixture change 0°, 30°, 45°, 2.The machine table is easily up and down manually 0 – 180 ...more
1000 KW, Teledyne / Louis-Allis, complete hydro-electric generating system, 1985
Peterson Machinery Sales | Casa Grande, AZ
Category: Hydro-electric Generators
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Teledyne
Year: 1985
REC # 2585, (1) Used 1,000 KW LOUIS-ALLIS / TELEDYNE Hydro-Electric Generating System; MFG. 1985, Turbine (Runner), Manufacturer.Teledyne, Type.Francis (vertical axis), Diameter (nominal).60", Design Head.41 ft., Rated Discharge.332 cu.ft/sec., Radial Bearing.Thordon, Wicket Gates:, Type.Butterfly, Number.24 ...more
Mannesmann Meer, pipe mill line with quick change injector tooling, 220mm x 8mm
National Machinery Exchange | Newark, NJ
Category: Pipe Machinery
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Mannesmann
Updated Mechanically and Electrically, Welder New in 2005, Tube Diameter Range: 88.9mm - 220mm, Wall Thickness: 2.6mm - 10.0mm, Rounds Thickness: 10mm, Square & Rectangles Thickness: 8mm, Shaft Diameter: 160mm, Tube Lengths: 2.6M - 12M, Line Speed: 100 Meters/Min, Squares: 70mm x 70mm - 155mm x 155mm, Rectangular: ...more
Cam-Wood #ERD-4000, veneer edge reinforcing machine, 157.5" veneer face length, 2026
Ex-Factory | Charlotte, NC
Category: Wood Veneer Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: ERD-4000
Year: 2026
CAM-WOOD/INNOVATOR ERD 4000 Edge Reinforcing Machine. Tape veneer sheets up with paper and simultaneously cut off the waste as the final step. Adjustable width of trimming heads to fit the size of veneer faces as required. Device uses tape to effectively keeps the edges of veneer faces from splitting while being ...more
24" x .625" Torrance / SMS ERW API linear forming cage tube mill, 25'-80' tube length
National Machinery Exchange | Newark, NJ
Category: Tube Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Torrance
Manufacturer - Torrance/SMS, Type - ERW Tube Mill, Material - X42-X80, Tube Diameter -10.75" - 24", Entry Strip Width - 31" - 76.5", Wall Thickness - 0.250" - 0.625", Tube Length - 25' - 80' (based on current configuration), Entry Feed line - with Guild accumulator, Edge Treatment - Dual Head SMS Edge Milling ...more
1500 KW Atlas Copco #QAS1500, diesel generator set, in 20' container, Volvo TWD-1683-GE, T4F, liquid-cooled, sound attenuated enclosure, sliding base concept
Collicutt Energy Services | Red Deer, AB
Category: Diesel Generators
Seller: Collicutt Energy Services
Location: Red Deer, AB
Mfr: Atlas Copco
Model: QAS1500
The Atlas Copco QAC 1500 TwinPower generator is a 20-foot containerized generator providing over 1 Megawatt of prime power!, The two 725kVA generators inside make it perfect for applications that have variable power needs, especially in the Industrial Power Plant (IPP), Events, Oil & Gas and Mining industries. It ...more
RWF Cold Rolling Mill, Carbon Steel, 250mm x 550mm x 630mm, X-ray, AGC, conventional control, PLC
National Machinery Exchange | Newark, NJ
Category: Cold Roll Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Rwf
Material- Carbon Steel, Material Thickness max/min - 6.5mm/0.20mm, Entry Uncoiler, Snubber Roll, Straightener, Coil Weight - 7 ton, Coil outside diameter, max - 1400 mm, Coil inside diameter - 508 mm, Max material width - 630 mm, Material Thickness max/min- 6.0 mm/ 0.40 mm, Roll Face- 680mm, Max Speed- 300 m/min ...more
20" x .563" Yoder / Mill Tech Complete API Pipe Mill Line (Upgraded 2012)
Galaxie Corporation | Wayne, MI
Category: Tube Mills
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Yoder
Manufacturer: Yoder / Mill Tech, Pipe Grade :, API 5L (Grade up to X80), API 5CT (Grade H40, J55 and K55), ASTM, ISO, DNV (OS F101), Specific International /National Standards, Technical and Production Data: Pipe OD Range: 6 5/8" to 20" Wall Thickness Range:.157" to.563" Pipe Length : 20' to 78.5' Production Capacity: ...more
Cat 966M, Wheel Loader, 9124 hours, S/N: KJP01707, 2016
Fabick Cat | Fenton, MO
Category: Wheel Loaders
Seller: Fabick Cat
Location: Fenton, MO
Mfr: Caterpillar
Model: 966M
Year: 2016
**ATTACHMENTS PICTURED ARE, 966M WHEEL LOADER, 966M WHEEL LOADER AM-N DCA8, AIR INLET STANDARD, RAIN CAP, ANTIFREEZE, -34C (-29F), ANTIFREEZE, -50C (-58F), AXLES, AUTO DIFF F/R, ED, BE INCLUDED IN THE PRICING**, BUCKET-GP, 126 IN. 6.00YD3, CAB ROOF, NON-METALLIC, CERT EMISSIONS, EPA TIER 4, COOLING CORES, 9 FPI ...more
JUST ADDED!
Eagle #iNspire-1530-F20.0, fiber laser, 20000 watt, IPG YLS-20000 power source, 5' x10' table, Riedel chiller, Donaldson dust collector, 2020
Elite Machinery Inc | Caledonia, WI
Category: CNC Lasers
Seller: Elite Machinery Inc
Location: Caledonia, WI
Mfr: Eagle
Model: INSPIRE-1530-F20.0
Year: 2020
Machine, Model: Eagle iNspire 1530 F20.0, Working Range:, X-axis: 3060 mm, Y-axis: 1540 mm, Z-axis: 100 mm, Maximum Sheet Weight: 1000 kg, Machine Dimensions, Length: 10000 mm, Width: 3080 mm, Height: 3060 mm, Weight: 18 t, Maximum Speeds, Maximum Cutting Speed: 150 m/min, Parallel to the X, Y axes: 240 m/min ...more
3000 KVA Caterpillar #C175-16, generator set, sound enclosure, 400 Volts, 50 Hz, 82 Hours
NineX Power Systems | Spring, TX
Category: 50 Hz Diesel Generators
Seller: NineX Power Systems
Location: Esbjerg, Europe
Mfr: Caterpillar
Model: C175-16
Year: 2016
Very Low Hour CAT C175-16 3000kVA Generator Set; Sound Enclosure; Immaculate Condition – 82 Original Hours; 3000kVA Standby Rated; 50Hz; 400V; EMCP 4.2 Control Panel; 5000A Breaker; Six Units In Stock – Immediately Available, GENERATOR SET: Manufacturer : Caterpillar Manufacturer : Caterpillar Package ...more
7000 Ton, Schloemann, Stainless Steel oil hydraulic extrusion press line
National Machinery Exchange | Newark, NJ
Category: Extrusion Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Schloemann
PRESS LINE COMPONENTS:, HANS HENNING ROTARY BILLET FURNACE, 2800 TON VERTICAL EXPANSION PRESS, (2) IAS (SMS) PREHEAT UNITS, (2) IAS (SMS) INDUCTION HEATING UNITS, 7000 TON SCHLOEMANN EXTRUSION PRESS, PRESS RUNOUT, DIES, CONTAINERS, BACKING ASSEMBLIES, TOOLING, HANS HENNING ROTARY BILLET FURANCE, TYPE - NATURAL GAS ...more
350 HP Allen-Bradley, 20BD415N0ANNNND0 Series B, VFD, Nema 12, 480 Volts
Green Industrial LLC | Belgium, WI
Category: AC Variable Frequency Drives
Seller: Green Industrial LLC
Location: Belgium, WI
Mfr: Allen-Bradley
Model: 20BD415N0ANNNND0 SERIES B
We purchased and removed these operating variable frequency drives from an operating facility that was closing. Great condition and ready to ship!, Save thousands and buy used from Green Industrial today!, FOB: Belgium, WI 53004 USA, Condition: Working take-out., DIMENSIONS:, 32" Deep, 40" Wide, 92" Tall, Brand: Allen ...more
DMG, Mori Deckel Maho #DMC-75V linear, 34.8" X, 23.6" Y, 23.6" Z, 10000 RPM, HSK-A63,2006/8
Franke CNC, LLC | Germantown, WI
Category: Vertical CNC Machining Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Dmg
Model: DMC-75V
5-AXIS MACHINING CENTERS DECKEL MAHO DMC75V linear SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: Machine was first installed new in June 2008 May be inspected under power in our Wisconsin showroom by appointment -CONTROL- HEIDENHAIN iTNC 530 3-D control with 15" TFT ...more
Zhangjiagang 12-head Bottling Line, Glass Bottles, max 2000 BPH, w/ Bottle Washer, Filler, Crowner, And Labeler, 2021
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Year: 2021
Make: Zhangjiagang Baixiong Beverage Machinery Co., Ltd., Model: Complete Line, Year: 2021, Machine Location: Massachusetts, Used Zhangjiagang Bottling Line for Still Beverages in Glass Bottles with Bottle Washer, Filler, Crowner, and Labeler:, Previously used for filling 7 oz bottles of Sake beverage at a rate of 15 ...more
Agie Charmilles #Cut-30P, CNC high precision wire cutting Electrical Discharge Machine, 5-Axis, automatic wire feed, 2014
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Wire EDM Machine
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Agie Charmilles
Model: CUT-30P
Year: 2014
Agie Charmilles Cut 30P CNC Wire Cutting EDM, New 2014 X-axis movement: 600 mm, Y-axis movement: 400 mm, Z-axis movement: 350 mm, V-axis movement: 50 mm, U-axis movement: 50 mm, High-precision wire EDM machine from +GF+ Agie Charmilles, model EDM CUT 30 P., This advanced generation machine combines Swiss engineering ...more
30" x 62" I2S / Mesta, 2 Hi Temper Pass Mill, Carbon Steel, L-R, 2160 FPM, Hydraulic Screwdown, GE 9070 PLC
National Machinery Exchange | Newark, NJ
Category: 2 High Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: I2s
Mill Manufacturer - MESTA, Modernized in 1998 by I2S, Typical Products - Carbon Steel, 2 mm to.15 mm up to 1422 mm wid,.080 to.006" thickness up to 56" wide, Roll Size: 762 mm (30"), Max 30" Min 28", Roll Face: 1575 mm (62"), Coil ID: 570/600 mm (22.5/24"), Coil OD Max: 1676 mm (66"), Coil Weight: 20 tons, Mill ...more
610mm 24" ) x 14" mm Yoder/Mill Tech Rafted API Pipe Mill Line
Galaxie Corporation | Wayne, MI
Category: Tube Mills
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Yoder
Yoder/Mill Tech API Pipe Mill Line, Rafted Stands with Spare Set of Rafts, Upgraded By Mill Tech in 2008, Pipe Diameter: 219mm - 610mm (8" - 24"), Wall Thickness: 4.5mm - 14mm, Grades: API X70, API 5L X42 to PSL, API 5L X65 to PSL, Maximum Line Speed: 20 Meters/Min, Pipe Length: 6 - 18 Meter, Complete Line with:, 40 ...more
Fendt FT1167MT36, Tractor, 1126 hours, S/N: F1167CNNNG1136, 2022
Butler Machinery Company | Sioux Falls, SD
Category: Wheel Tractors
Seller: Butler Machinery Company
Location: Chadron, NE
Mfr: Fendt
Model: FT1167MT36
Year: 2022
ACCESSORY BAR SINGLE, CAB SUSPENSION DELUXE, CASE DRAINS 1 DB, CONTOUR ASSISTANT, DEBRIS EJECTORS WIDE, DRIVE WHEEL WEIGHTS 2 OUTER, ENGINE BLOCK HEATER 120V, FENDT GUIDE STANDARD NOVATEL, FIRE EXTINGUISHER BRACKET, FRONT BELLY GUARD, FRONT WEIGHTS 2000KG, FT1167 BASE UNIT TF4 NA, FUEL LINES HIGH CAPACITY, GAUGE ...more
Grecon #Turbo-S-1000, vertical & horizontal finger jointer press, 2010
Ex-Factory | Charlotte, NC
Category: Woodworking Jointers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Grecon
Model: TURBO-S-1000
Year: 2010
GRECON TURBO S 1000 Finger Jointer and PressAutomatic packaging system finger jointing line incl. 12t press system. For multiple lengths.A flexible finger jointing line which is used for processing timber packages and manufacturing horizontal as well as vertical finger joints. The individual pieces of wood are ...more
1500 KW Caterpillar #3512, Heavy Duty Mobile Genset, 600 Volts, 1998
Toromont Cat - Gensets | Pointe-claire, QC
Category: Diesel Generators
Seller: Toromont Cat - Gensets
Location: Pointe-Claire, QC
Mfr: Caterpillar
Model: 3512
Year: 1998
Good used Caterpillar mobile 1500kW 600Volts genset Heavy-Duty mounted for rough services, Form woung generator end, 1x 40’ Non-sound attenuated container w/steel floor for fire prevention, 240V/50A TL Shore Power Inlet with 50A sub panel, Includes all required circuit protections, 240V Feeds to the supplied ...more
17-1/2" x 2-1/2" KZ Slitting Line, 2200 lb., 17 cuts, 240 MPM, 500mm housing distance, 170mm slitting knife
National Machinery Exchange | Newark, NJ
Category: Slitting Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Previously used for Stainless Steel, Strip Width: 8-320mm, Thickness: 0.20 -3.0mm, Number of Cuts: 17, Cutting Speed: 240M/Min, Max. Distance between Housing: 500mm, Arbor Diam.x Width: 80mm x 380mm, Slitting Knife Diam.: 170mm, With:, Decoiler, Mandrel Diam.: 450mm, Mandrel Width: 500mm, Coil Weight: 1000KG ...more
Erbend #EMS3220, shear, 2024
Machine Tool Technologies | Milwaukee, WI
Category: Guillotine Shears
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: EMS3220
Year: 2024
CUTTING LENGTH 3200mm/10.5’, CUT PER MINUTE 35, MOTOR POWER 4 KW, MILD STEEL 2 (14g) mm, STAINLESS 1.2 (18g) mm, ALUMINIUM 3 mm, DIMENSIONS (W X L X H) 1950 x 3750 x 1600 mm, 77” x 147” x 63”, WEIGHT 2010Kg 4,431 lbs, • 1000 MM SERVO MOTORIZED BACK GAUGE SYSTEM, • TOUCH-SCREEN NC ...more
SJMC #BV60, valve seats boring, small sized engine & compound cylinder engine, 4mm diameter
MachTrade | Las Vegas, NV
Category: Valve Seat and Guide Machines
Seller: MachTrade
Location: Las Vegas, NV
Mfr: Sjmc
Model: BV60
Valve Seat Boring Machine Model: BV60 with high availability meets the requirements of boring, reaming and cutting machining for high accuracy valve guides and valve seats. Light boring head of patent-based design is triple air flotation device, self-centering system and spindle motor. Designed specially for repairing ...more
Makino #A71NX, 3-machine automation system CNC horizontal machining center, 31.5" X, 29.5" Y, 32.7" Z, 10000 RPM, 136 automatic tool changer
Premier Equipment Inc | Altamonte Springs, FL
Category: Horizontal CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Makino
Model: A71NX
(2018, 2021, 2021) Makino A71NX 3-Machine Automation System CNC Horizontal Machining Center, Note: This system can be sold as a whole or Individually, X Axis Travel: 31.5″, Y Axis Travel: 29.5″, Z Axis Travel: 32.7″, Spindle Speed: 10,000 RPM, Spindle Taper: HSK100 CT, Spindle Motor: 50 HP, Rapid ...more
Brass Billet Inductotherm Melting & Technica Guss Casting Facility
National Machinery Exchange | Newark, NJ
Category: Continuous Casting Machines
Seller: National Machinery Exchange
Location: Newark, NJ
BRASS FOUNDRY + 4-STRAND BILLET CASTER., LNS CHIP CONVEYOR ==> 4X LOADING SYSTEM WITH VIBRATING SCREEN "ACETARC", 7 TON INDUCTION FURNACE "INDUCTOTHERM" 1750KW (2013) + 7 TON FURNACE "RUSS", 1500KW, 4-STRAND CONTINUOUS BILLET CASTER "TECHNICA GUSS", RUSSEL COLD SAW + OVERHEAD, CRANE., BRASS BILLET OUTPUT CAPACITY WITH ...more
Schumag, drawing machine, 2006
D & H Machinery Inc | Toledo, OH
Category: Combined Drawing Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Schumag
Year: 2006
Manufacturing Year: 2006, Aluminum Bar: 22mm - 60mm, Line Speed: 10~40m/min, Cutting Length: 2000~5000mm, -Drawing Machine:, Line max. speed: 40m/min, Motor rated speed: 750rpm(40m/min/ 727.625rpm), Gear ratio: (1/29.105)/(25/40)=1/18.2, -Shear:, Car max. speed: 60m/min, Motor rated speed: 3000rpm(40m/min/ 1131.8rpm) ...more
Cat 966M, Wheel Loader, 13759 hours, S/N: GMS00235, 2019
Fabick Cat | Fenton, MO
Category: Wheel Loaders
Seller: Fabick Cat
Location: Schofield, WI
Mfr: Caterpillar
Model: 966M
Year: 2019
**ATTACHMENTS PICTURED ARE, 966M WHEEL LOADER, ANTIFREEZE, -34C (-29F), AUTOLUBE, STD LIFT, AXLES, AUTO DIFF F/R, ED, BE INCLUDED IN THE PRICING**, CAB TRIM, VENTED (LHD), CERT EMISSIONS, EPA TIER 4, COOLING CORES, 6 FPI, COUNTERWEIGHT, 1000KG, Engine, FAN, VPF, ANSI, FENDERS, BASIC +, FILTRATION, STANDARD, GUARD ...more
Bodor #M500-120-120, Fiber Laser Metal Tube Cutting Machine, 12000 watt, NEW
Smith Machinery Co | Ames, IA
Category: CNC Lasers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Bodor
Model: M500-120-120
FIBER LASER CUTTING MACHINE: Laser Power 12kw Freight & Tariff Included Installation & Training Cost Included Transportation By Sea Loading Container 3*40'GP+3*40'OT+1*20'GP Payment Terms 30% down payment, 70% before shipment. Warranty Three years limited warranty for main parts. One year free ...more
Valmet, 140" tissue machine, twin wire, wt, crep, 100 TPD, 1988
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Valmet
Year: 1988
TECHNICAL DATA, Manufacturer : Valmet, Type : Twin-wire, wet crep, Year of construction : 1988, Paper width on reel : 3460 mm, Production speed : up to 1300 m/min, Grammage : 17 to 50 GSM, Drying Capacity : 100 ton/day, Raw material : Virgin pulp / De-inked pulp, Drive voltage : 500 V 50 Hz, Machine Drive type : ...more
330 Ton, Minster #MMC-SX2-3000G-SV, 2-pt servo press, 11.81" stroke, 21.6" Shut Height, 4.7" adj., variable speed, 43.3" x94.5" bed, 300 SPM, 2022
Nidec Press & Automation | Macomb, MI
Category: Servo Drive Presses
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Minster
Model: MMC-SX2-3000G-SV
Year: 2022
SPM 300, Tonnage 330 tons, Stroke 11.81 inches, Shut Height 21.6 inches, Vari Speed (Yes/No) yes, Bed W 43.3 inches, Bed L 94.5 inches, Crank (Single/Double) double, Air Clutch (Yes/No) no, Main SX2-3000G-SV, Unit, Unit, Capacity, kN, 3000, US Tons, 330, Frame Type, Straight Side, Unitized Frame, Rated Tonnage Point ...more
Bystronic #I.G.-2535R-L, 98.5" x 138" insulated glass line, 2007
Ex-Factory | Charlotte, NC
Category: Insulated Glass Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bystronic
Model: I.G.-2535R-L
Year: 2007
BYSTRONIC I.G. 2535 R-L Insulating Glass Line - 2500 x 3500 mm (98.5"; x 138";) - SUPER SPACERComplete BYSTRONIC Production Line for the assembly of insulating glass units. Offers high quality gas filled IG manufacturing with an excellent cost to performance ratio. Maximum glass size: 2500 x 3500 mm (98.5"; x 138";) ...more
1600 KW MWM TCG-2016V16C, gas generating set 800KW X 2 BIOGAS ENGINE COGENERATION POWER PLANT (NEW UNUSED)
Atlantic Power & Equipment | Atlantic City, NJ
Category: Natural Gas Or Dual Fuel Generators
Seller: Atlantic Power & Equipment
Location: ATLANTA, GA
Mfr: Mwm
Model: TCG 2016V16C
Year: 2015
MWM 1600 KW UNUSED BIOGAS ENGINE COGENERATION POWER PLANT, Manufacturer: MWM CATTGC 2016 V 16C, Rating each: 800 KW each Total 1600 kw, Number of units: 2, Speed: 1800 rpm, Number of cylinder: 16, Bore x stroke Displacement: 5.2 x 6.3 inch 2135 cu. inch, Generator: 1500 kva each, Rating each: Voltage: 480 v, 3 phase ...more
1500 KW Fairbanks-Morse #12-251E ALCO 2400 HP Diesel Engine, w/1-1/2 Megawatt 480 VAC Generator, new/unused (2 available)
C & D Professional Services | Lacey, WA
Category: Diesel Generators
Seller: C & D Professional Services
Location: Ft. Worth, TX
Mfr: Fairbanks-Morse
Model: 12-251E
Year: 1997
1997 Fairbanks Morse ALCO Diesel Engine, Model 12- 251E, 2400 HP, W/ Westinghouse Synchronous Generators, 1500 Kw @ 900 RPM, 450-480 Volts, 2406 Amps, 3 Phase, 60 Herts, Water Cooled. This equipment is unused, stored indoors, and in perfect condition. Located in Ft Worth, Texas, the replacement cost of these units ...more
Featured
Howden, turbine generator
Global Equipment International | Chalfont, PA
Category: Steam W/Out Generator Turbines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Howden
Howden TWIN Condensing Steam Turbine with A.C. Generator MFG 2018, OEM: Siemens Turbomachinery Equipment Series SST-110, Unit type: Twin-CA 56, Power output: 6.7MW, Main Steam Temp: 445C, Operates on 900F superheated steam at 800psi., Provides plant process steam at 375F at 46psi, RO make-up water treatment system ...more
Danieli Bar Mill, 11 Stands, 270000 Ton/ Yr., horizontal, Round Deformed Bar, 1995
National Machinery Exchange | Newark, NJ
Category: Bar and Rod Rolling Mills
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Danieli
Year: 1995
Year: 1995, Production Capacity: 270,000 Tons / Year., Reheating Furnace: 50 Ton / H., Mill Arrangement: Horizontal, Billet Size:120 X 120 / 130x130 / 140x140 / 130x190 X 6000 Mm, Finished Products: 10mm to 32mm, Round Deformed Bar, COMPONENTS:, REHEATING FURNACE, (1) Pusher Type, Natural Gas, DANIELIi ROUGHING MILL ...more
1250 Ton, Pressezzi Presssezzi Brass Rod Oil Hydraulic Press Line, 2009
National Machinery Exchange | Newark, NJ
Category: Hydraulic Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pressezzi
Year: 2009
1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING, SYSTEM (NEW 2009), MANUFACTURER - PRESEZZI, YEAR - 2009, SERIAL NUMBER - 2671-2009, PRESS TONNAGE - 1250 MT, WORKING PRESSURE - 260 BAR, BILLET DIAMETER - 145MM, BILLET LENGTH MAX - 650MM, MAIN CYLINDER (SINGLE ACTING), WORKING PRESSURE - ...more
Branson #2000IW+, Ultrasonic Welder, 14 Amps, 100-120 V, 2021
HGR24 | Euclid, OH
Category: Ultrasonic Welders
Seller: HGR24
Location: Euclid, OH
Mfr: Branson
Model: 2000IW+
Year: 2021
Inventory No. 0419-126-5602 Manufacturer Branson Model No. 2000IW+ Name Ultrasonic Welder Arrival Date 01-14-2026 Dimensions L x W x H (inches) 34 x 19 x 52 Capacity 14 A Electrical 1/50/60/100-120 Weight (lb.) 90 Category Plastics Condition Used Available Quantity 1 Serial No. WMA21015845A Make Year 2021 Item Made In ...more
Ever Green #2000IW+ Dual Head Ultrasonic Plastic Welder
TNT Industrial | Orange, CA
Category: Ultrasonic Welders
Seller: TNT Industrial
Location: Orange, CA
Mfr: Ever Green
Model: 2000IW+
Orange, Calif 92865..
Branson #2000IW, ultrasonic welders, 3300 watts, 2020
Global Machine Brokers LLC | Guilford, CT
Category: Ultrasonic Welders
Seller: Global Machine Brokers LLC
Location: Guilford, CT
Mfr: Branson
Model: 2000IW
Year: 2020
2020 BRANSON 2000IW.
525 gallon Liaoyang Pharmaceutical Machinery #SFK-2000L, Reactor, Stainless Steel, 2000-liter, 5' diameter x 5' 8" H, 15.5" diameter Manway, 100 deg C jacket, 3 kW, 1420 RPM, 440 V
Machinery & Equipment Co | Brisbane, CA
Category: Reactors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Liaoyang Pharmaceutical Machinery
Model: TYPE SFK-2000L
Reactor, approximately 525 gallon (2,000 liter) capacity, Liaoyang Pharmaceutical Machinery Co., type SFK-2000L, 316 stainless steel construction, measures 5' diameter x 5'8" high, dished top and bottom, jacketed, rated for 100 degrees Celsius, complete with agitation, driven by 3 kW, 440 volt, 1420 RPM motor ...more
JUST ADDED!
Branson #2000IW+20:2.2, Ultrasonic Welder, 2300 Watts, 200-240 V, 2003
HGR24 | Euclid, OH
Category: Ultrasonic Welders
Seller: HGR24
Location: Euclid, OH
Mfr: Branson
Model: 2000IW+ 20:2.2
Year: 2006
Inventory No. 0126-044-0017 Manufacturer Branson Model No. 2000IW+ 20:2.2 Name Ultrasonic Welder Arrival Date 01-22-2026 Dimensions L x W x H (inches) 34 x 17 x 55 Capacity 2300 W Electrical 50/60/200-240 Weight (lb.) 185 Category Plastics Condition Used Available Quantity 1 Serial No. WMB06036438 Make Year 2006.
JUST ADDED!
Branson #2000iw+ 20:2.2, Ultrasonic Welder, 2300 Watts, 200-240 V, 2006
HGR24 | Euclid, OH
Category: Ultrasonic Welders
Seller: HGR24
Location: Euclid, OH
Mfr: Branson
Model: 2000IW+ 20:2.2
Year: 2006
Inventory No. 0126-044-0010 Manufacturer Branson Model No. 2000IW+ Name Ultrasonic Welder Arrival Date 01-21-2026 Dimensions L x W x H (inches) 38 x 17 x 55 Electrical 50/60/200-240 Weight (lb.) 185 Category Plastics Condition Used Available Quantity 1 Serial No. WMB06036437 Make Year 2006.
JUST ADDED!
1915 KW Cummins #2000DQKC, Diesel Generator, 2568 HP, Cummins #QSK60-G6 Engine, 277/480 Volts, sound attenuated enclosure, 806 hours, 1999 (2 available)
McKain Power Systems Consulting LLC | Katy, TX
Category: Diesel Generators
Seller: McKain Power Systems Consulting LLC
Location: Katy, TX
Mfr: Cummins
Model: 2000DQKC
JUST ADDED!
1915 KW Cummins #2000DQKC, Diesel Generator, 2568 HP, Cummins #QSK60-G6 Engine, 277/480 Volts, sound attenuated enclosure, 805 hours, 1999
McKain Power Systems Consulting LLC | Katy, TX
Category: Diesel Generators
Seller: McKain Power Systems Consulting LLC
Location: Katy, TX
Mfr: Cummins
Model: 2000DQKC
Year: 1999
JUST ADDED!
1915 KW Cummins #2000DQKC, Diesel Generator, 2568 HP, Cummins #QSK60-G6 Engine, 277/480 Volts, sound attenuated enclosure, 800 hours, 1999 (3 available)
McKain Power Systems Consulting LLC | Katy, TX
Category: Diesel Generators
Seller: McKain Power Systems Consulting LLC
Location: Katy, TX
Mfr: Cummins
Model: 2000DQKC
Vytek/LSM Laser Cleaning System, Demo Unit, Pulsed Laser
Vytek Laser Systems | Fitchburg, MA
Category: Laser Cleaning Systems
Seller: Vytek Laser Systems
Location: Fitchburg, MA
Mfr: Vytek
Model: LSM LASER CLEANER
Restore, prep, and clean with precision. The Vytek LSM Laser Cleaning System removes rust, paint, oil, and oxides with zero abrasives, chemicals, or mess—just fast, contact-free cleaning using laser light., Machine Type: Laser Cleaning SystemManufacturer: VytekModel: LSM pulseCLEAN laserYear: 2024Condition: Demo ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
2000 Amps Ch Dslii-620 Eo/do Unused Surplus 120 Volts AC Control, Rms 810 Lsg, 2000 Amps Rp, 3000 Amps Fuse, Ots
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Category: Low Voltage Air Circuit Breakers
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Rms
Model: 2000 AMPS RP
for DSLII-620Manufacturer Westinghouse / Cutler Hammer Product Family DSII Type of Low Voltage Air Breaker DSLII-620 Frame Rating (Volts) 600 Frame Rating (Amps) 2000 Frame Rating (KA) 200 Operating Mechanism Electrically Operated (Stored Energy) Racking Configuration Draw out Shipping Width 24 in Shipping Height 29 ...more
500 KW mtu #DS500, diesel generator set, MGC 2000 control panel, 480 Volts, 101 hours, 2020
Critical Infrastructure Group LLC | Sparks, NV
Category: Diesel Generators
Seller: Critical Infrastructure Group LLC
Location: Sparks, NV
Mfr: Mtu
Model: DS500
Year: 2020
Manufacturer MTU Equipment Type Diesel Generator Engine MTU 10V1600 Serial Number 95010500945 Capacity (kW) 500 kW Voltage 480V Phase 3 Frequency 60 Hz Hours 101 Year Manufactured 2020 Condition Used Status In Stock Additional Information 1000 Gallon Fuel Base Tank, Level 2 Enclosure – 130 MPH Rated, 125A ...more
1250 KW Caterpillar #3512B, 794 hours, Tier 1, 2001, S/N CMC00207
Empire Power Systems | Phoenix, AZ
Category: Diesel Generators
Seller: Empire Power Systems
Location: Henderson, NV
Mfr: Caterpillar
Model: 3512B
Year: 2001
2001 CAT 3512B 1250 KW, 794 HOURS SINCE NEW, 480V 12 WIRE, 2000A MAIN, BREAKER, JACKET WATER HEATER, ELECTRIC START, CHARGING ALT, STANDARD DUTY AIR CLEANERS, Brett Lambeth 702-803-4881.
Enercon, ComPak 2000 Deluxe, power supply, 15 KW, never used in original crate, 2016
Global Equipment International | Chalfont, PA
Category: Power Supplies - Miscellaneous
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Enercon
Model: COMPAK 2000 DELUXE
Year: 2016
903678.002, One (1) used Enercon Power Supply 15KW COMPAK 2000 Deluxe. MFG 2016. New in original crate., 480V. Ethernet communication. Order # 124502, MFG, 2150 Deluxe Compak 2150 W/network control, Compak series 2000 deluxe 15kw - wall mount - 480v 3ph 60hz, (1) rockwell ethernet network communications (includes ...more
NEW Enercon Corona Treater Power Supply 15KW COMPAK 2000 Deluxe #903678.002
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Enercon
Model: COMPAK 2000
NEW Enercon Power Supply 15KW COMPAK 2000 Deluxe MANUFACTURED 2016 #903678.002. 30 DAY RIGHT TO RETURN (FREE RETURNS DOMESTICALLY) AUTHENTICITY GUARANTEED! WE SOURCE OUR PRODUCTS FROM CLOSED LOCATIONS AND OTHER TRUSTED SOURCES.
Ruian Fuchang #2000B, automatic capsule filler, 2000 capsules per minute,Tamp in style encapsulation machine, 200B
Aaron Equipment Co | Schaumburg, IL
Category: Filling Equipment (Fillers)
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Ruian Fuchang
Model: 2000B
used- ruian fuchang co automatic capsule filler, model 2000b. rated to 2000 capsules per minute. tamp in style encapsulation machine. not filling section or change parts.
Branson #2000X, ultrasonic welder 2500 wat, on enclosed stand, 2020, #104765
R.A.B. Industries Inc | Washington, MI
Category: Ultrasonic Welders
Seller: R.A.B. Industries Inc
Location: Imlay City, MI
Mfr: Branson
Model: 2000X
Year: 2020
1-USED BRANSON 2000X 2500 WATT UNLTRASONIC WELDER ON STAND ENCLOSURE.
550 KW Alpha-1, automatic billet induction heater system
National Machinery Exchange | Newark, NJ
Category: Induction Melting Furnace
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Alpha
BILLET INDUCTION HEATING SYSTEM:, CONSIST OF:, AIR TECHNICAL INDUSTRIES HYDRAULIC DUMP HOPPER, - SERIAL. 68162, - MODEL. C0323836E, - CAPACITY. 2,000 LBS, BILLET BOWL FEEDER & BILLET LOADER, INDUCTION HEATER COIL CHAMBER, 550 KW APHA-1 INDUSCTION HEATER, EXIT CONVEYOR & SHOOT.
