T R Wigglesworth Machinery
Bedford, OH 44146
Gold Level Dealer
Surplus Record Dealer Since 1940
Contact
T. Wigglesworth
About
T.R. Wigglesworth Machinery Co., since 1935, is a stocking distributor of new and used machine tools located in Bedford, Ohio. We look forward to working with you on your new & used machinery requirements.As MDNA's longest standing member, we offer trust and integrity. We encourage you explore our website and take advantage of the benefits of buying from an MDNA dealer.
This year our family celebrates over 90 years in business. We are dedicated to offering our clients highly sophisticated machine tools at the best possible value.
We look forward to assisting your business in understanding the turn-key machining solutions that T.R. Wigglesworth Machinery Company has available for you. Let's discuss your requirements today.
Products & Services
- Appraisers, Machinery & Equipment
- Boring Mills, Horz. & Vert.
- CNC Machinery
- Grinders, Cylindrical & Internal
- Grinders, Surface
- Lathes
- Lathes, CNC
- Machining Centers, CNC
368 listings in 65 categories
Fanuc #5S, red cap axis drive motor
Category: AC Servo Motors
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Fanuc
Frame: 5S
Year: 1993
FANUC No. 5S RED CAP AC AXIS DRIVE MOTOR, TYPE AO6B-0314-B010, CAME OFF RUNNING, AC SERVO MOTOR, MODEL. 5S, TYPE. A06B-0314-B010, NO. C93xc3198, TRQ. 5.9Nm, PHASES. 3, R.P.M. 2000, ACTUATION. PULSE CODE, "AS IS" SKIDDED STRAPPED & WRAPPED.
Fanuc red cap ac servo drive
Category: AC Servo Motors
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Fanuc
Year: 1993
FANUC No. 5S AC SERVO DRIVE 1993, TYPE. Ao6B-0314-B010, C93XC3026, Model. 5S, TYPE. AO6B-0314-B010, NO. C93XC3026, TRQU. 5Nm 3Phase, AMP. 5.8 A 8Poles, INSULATION. CLASS F, VOLT. 126, WITH:, TSUBAKIMOTO, TEM FLEX COUPLER, EMER-FLEX, NEF10.
Fanuc redcap ac spindle drive motor
Category: AC Servo Motors
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Fanuc
Year: 1993
FANUC No. 3 S AC SPINDE DRIVE MOTOR 1993, 5.5 KW / 7.5 H.P. 1500 / 6000 R.P.M., Fits perfectly with Fanuc 3S spindle motor bracket #11668., Model. 3 S AC SPINDLE MOTOR, TYPE. Ao6B-0753-B100, KW RATING. 3.7 CONT. / 5.5 30 Min., H.P. RATING. 5 CONT. / 7.5 30 Min., R.P.M. 155 / 6000, POLES. 4, "AS IS" SKIDDED, STRAPPED ...more
16.5" x 12" x 12" Devleig #B-286, angle plate
Category: Angle Plates
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devleig
3 T-slots, 4" Slot spacing, Height.12", Width.16 1/2", Length.12", 3 T-slots.
17" x 30-1/4" x 15-1/8" Devlieg, right angle plate, 6 T-slots, 3 eyebolt holes on top
Category: Angle Plates
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
6 T-slots, 3 eyebolt holes on top, Length. 15 1/8", Width.17", Height.30 1/4".
20.5" x 25" x 17.75" Devlieg #B-1158, angle plate
Category: Angle Plates
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
6 T-slots on the front face, 4 T-slots in the top, 4" Slot spacing, Height.25", Width.20 1/2", Length.17 1/4", 6 T-slots on the front face, 4 T-slots in the top.
24" x 26" x 48" Heavy Duty T-Slotted Steel Angle Plates, 6 T-Slots, (2 available)
Category: Angle Plates
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Heavy Duty T Slotted Steel Angle Plates, 48" X 24-13/16" X 26-1/4"., Number of T Slots - 6, - Distance between on Center - 8", Adapter Holes on the Base Plate - 6, Height 48", Width 24 -13/16", Length 26-1/4", Base Dimensions:, 26-1/4" x 24-3/4", Plate thickness:, 2-3/8".
Angle Plate, 90 degree, 3 T-slot
Category: Angle Plates
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
90 degree angle, 3 T-slot angle plate, 4 securing holes, Length. 15 15/16inch, Height.8inch, Width. 6inch, Face Dimensions.15 15/16inch x 8inch, Weighs 58LBS as is, _UNKNOWN_ _UNKNOWN_.
250 Amps, Lincoln #IDEAL ARC 250, Tig 250 / 250 Arc Welder, Fan-cooled
Category: Arc Welders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Lincoln
Model: IDEAL
250 Amp Stick Welder, The Ideal Arc 250 is the classic workhorse of the Lincoln Electric stick welding power source line. It produces up to 250 amps of brute AC welding strength and 250 amps of smooth DC welding performance., TIG-250 / 250 Variable Voltage, AC/DC ARC Welding Power Source, High Frequency With ...more
1000 Amps. ESAB #Aristo-1000, AC/DC submerged arc welding (SAW) system w/o feeder & controller
Category: Arc Welders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Esab
Model: ARISTO-1000
ESAB Aristo 1000 AC/DC Saw available, used welder with robust : max 1000 A output, 100% duty cycle, 380575 V input. Compact and efficient at 52" x 24" x 34" and 727 lbs, ideal for demanding applications., Electrical :, Input Voltage: 380575 V, 3-phase, 50/60 Hz, Maximum Output Current: 1000 A, Duty Cycle: 100% at 1000 ...more
No. B42 Index, automatic bar machine, 2" bore, 1.5" bar stock, 15.7" dia., 47.2" lgth
Category: Automatic Bar Machines
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Index
Model: B42
Max Turning Diameter: 15.7 inches (400 mm), Max Turning Length: 47.2 inches (1,200 mm), Bar Stock Capacity: 1.5 inches (38 mm) diameter, Spindle Speed Range: 40 - 2,500 RPM, Spindle Bore: 2.0 inches (51 mm), Bar Stock Capacity: 1.5 inches (38 mm) diameter, Main Motor Power: 15 HP (11 kW), Turret: Typically 6 to 12 ...more
No. C29 Index, automatic bar machine, 2.2" bore, 1.25" bar stock, 11.8" dia., 33.5" lgth
Category: Automatic Bar Machines
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Index
Model: C29
Max Turning Diameter: 11.8 inches (300 mm), Max Turning Length: 33.5 inches (850 mm), Bar Stock Capacity: 1.25 inches (32 mm) diameter (varies depending on the configuration), Spindle Speed Range: 40 - 3,000 RPM, Spindle Bore: 2.2 inches (56 mm), Main Motor Power: 10 HP (7.5 kW), Turret: Typically 6 to 12 tool ...more
No. C19 Index, automatic bar machine, 1.5" bore, .9" capacity, 7.9" diameter, 19.7" length
Category: Automatic Bar Machines
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Index
Model: C19
Max Turning Diameter: 7.9 inches (200 mm), Max Turning Length: 19.7 inches (500 mm), Bar Stock Capacity: 0.9 inches (22 mm) diameter (varies depending on the configuration), Spindle Speed Range: 40 - 4,500 RPM, Spindle Bore: 1.5 inches (38 mm), Main Motor Power: 5 HP (3.7 kW), Turret: Typically 6 to 8 tool stations ...more
No. C19 Index, automatic bar machine, 1.5" bore, .9" capacity, 7.9" diameter, 19.7" length
Category: Automatic Bar Machines
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Index
Model: C19
Max Turning Diameter: 7.9 inches (200 mm), Max Turning Length: 19.7 inches (500 mm), Bar Stock Capacity: 0.9 inches (22 mm) diameter (varies depending on the configuration), Spindle Speed Range: 40 - 4,500 RPM, Spindle Bore: 1.5 inches (38 mm), Main Motor Power: 5 HP (3.7 kW), Turret: Typically 6 to 8 tool stations ...more
Automatic Screw Machines and Chuckers
2 Results
Acme-Gridley #RA-6, 1-1/4" capacity, automatic multi-spdl collet chuck, bar machine, cross drill attachment
Category: Automatic Screw Machines and Chuckers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Acme-Gridley
Model: RA-6
1 1/4", ACME GRIDLEY, No. RA-6, BAR MACHINE, WITH CROSS DRILLING ATTACHMENT 5TH, MODEL: RA-6, MAXIMUM COLLET CAPACITY:, ROUND. 1 1/4", SQUARE. 7/8", "EXAGON. 1 3/, MAXIMUM LENGTH - STANDARD:, STOCK FEED. 7, TURNING. 6, RANGE OF SPINDLE SPEEDS:, MINIMUM RPM. 302, MAXIMUM. 2370, MAIN MOTOR. 20 HP, RPM FOR DRIVE PULLEY. ...more
Acme-Gridley #RA-6, 1-1/4" capacity, multi-spdl collet chuck, 7 slot feed, 6 turning, 20 HP
Category: Automatic Screw Machines and Chuckers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Acme-Gridley
Model: RA-6
1 1/4", ACME GRIDLEY, No. RA-6, SLOT FEED COLLET CHUCKER, MODEL: RA-6, MAXIMUM COLLET CAPACITY:, ROUND. 1 1/4", SQUARE. 7/8", "EXAGON. 1 3/, MAXIMUM LENGTH - STANDARD:, STOCK FEED. 7, TURNING. 6, RANGE OF SPINDLE SPEEDS:, MINIMUM RPM. 302, MAXIMUM. 2370, MAIN MOTOR. 20 HP, RPM FOR DRIVE PULLEY. 1750, STANDARD ...more
Bed and Knee Milling Machines - Vertical
5 Results
Acer #E-Mill-3VSII, vertical mill, 9" x49"tbl., 3 HP, 34" X, 12" Y, 16" Z, 60-4500 RPM, R-8, Newall DP700 2-Axis digital read out, power draw bar, 2017
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Acer
Model: E-MILL-3VSII
Year: 2017
ACER E-Mill Vertical Milling Machine, Model E-MILL 3VSII, 2017. s include 9x49" table, 34" long travel, 12" cross travel, 3 HP motor, 60-4500 RPM. Approx. weight: 2400 lbs., 2 Axis Newall Model DP700 DRO, Power Draw Bar, Digital Spindle Speed Readout, 3 HP Spindle Motor, One Shot Lubrication, Assorted R-8 Collets ...more
Acer #E-Mill-5VS-EVS-VSII, vertical mill, 9" x49" tbl., 3 HP, 60-4500 RPM, Acu-Rite 2-Axis digital read out, power draw bar, R-8, 2012
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Acer
Model: E-MILL-5VS-EVS-VSII
Year: 2012
Explore precision with the used 2012 ACER E-mill Vertical Milling Machine. s a 9"x49" table, 3 HP motor, and up to 4500 RPM. Enhanced with Acu-Rite DRO, power drawbar, and R-8 collets. Ideal for your advanced milling needs., MODEL: 3VSII, SERIAL NUMBER: 1112020056, NEW: 2012, Table Size: 9" x 49", Longitudinal Travel: ...more
Clausing #2VS08, vertical knee mill, 9" x49" tbl., 38" X, 14" Y, 3 HP, 4350 RPM, digital read out, power feed, 6" Kurt vise, coolant, 230 V., 3 Ph., 2014
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Clausing
Model: 2VS08
Year: 2014
CLAUSING 2VS08 vertical mill, 2014 model. s a 9"x49" T-slotted worktable with 38" longitudinal and 14" cross travel. a 3 hp motor at 4,350 RPM, DRO, power feed, milling vise, work light, and coolant system, 6" Kurt milling vise., Machine type: Vertical knee mill, Variable-speed vertical milling head, Digital readout ...more
Clausing #3VS08, vertical knee mill, 10" x54"tbl., 3 HP, 36" X, 15.74"Y, 22" Z, 4300 RPM, R-8, air operated power draw bar, Acu-Rite 3-Axis digital read out, 2014
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Clausing
Model: 3VS08
Year: 2014
2014 Clausing 3VS08 Knee Mill now for sale. s a 54"x10" table, 3 hp, 4,300 RPM, and R-8 taper. Includes 3-axis DRO, power drawbar, riser block, and coolant mist system. Ideal for precision machining. S/N P234617., Model: 3VS08, S/N: P234617, New: 2014, Voltage: 460, Machine Style. Knee Mill, Spindle Speed Control. ...more
Cleveland #AONE-2VSG, vertical knee mill, 9" x49"tbl., 36" X, 12" Y, 12" Z, 3 HP, R8, 60-4200 RPM, 2014
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cleveland
Model: AONE-2VSG
Year: 2014
Cleveland Machinery AONE-2VSG Vertical Knee Mill, 2014, used. s: 49" x 9" table, 36" X travel, 12" Y/Z travel, 3 HP spindle motor, R8 taper, 60-4,200 RPM. Head tilts 45 front/back, 90 right/left. Dimensions: 101" x 70" x 82". Weight: 2,200 lbs., Model Cleveland AONE-2VSG, Year 2014, Table Size 49" x 9", Longitudinal ...more
6" x 48" Powermatic #30A, combination belt & disc sander, 12" disc, 1.5 HP, 1800 RPM, 230/460 V., 3-phase
Category: Belt Sanders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Powermatic
Model: 30A
The Powermatic Model 30A 6" Belt / 12" Disc Combo Sander is a legendary, heavy-duty industrial woodworking machine built with premium cast-iron construction to eliminate vibration and deliver absolute precision. Designed for contour, flat, and aggressive angle sanding, this floor-standing powerhouse s an articulating ...more
Haas, 2" I.D. boring bar holder, coolant-through tool block, turret mounted, w/ coolant tubing & fittings, for ST-20 CNC lathe (2 available)
Category: Boring Bars
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Haas
2 Used Haas 2.000" I.D. CNC lathe boring bar holder / ID tool block with coolant-through plumbing., Genuine Haas tooling marked HAAS, MADE IN USA, and 2.000 I.D. on the holder body., Manufacturer: Haas Automation, Type: CNC Lathe Boring Bar / ID Tool Holder, Capacity: 2.000" I.D., Coolant-through design, Bolt-on / ...more
Warner & Swasey #M-4369, 2.5" x 15" boring bar
Category: Boring Bars
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Warner & Swasey
Model: M-4369
Warner & Swasey boring bar, 15" Overall Length, 2 1/2" Dia., Tool Shank 3/4" x 3/4", Overall length - 15", Diameter - 2(1/2)", Angle - 45 degrees on one end, 90 degrees on the other, Tool Shank (3/4)" x (3/4)" on both ends, Complete with Set Screw Hardware, Weight - 22lbs, "AS, IS" Skidded Strapped & Wrapped.
Ultra-Dex USA #A20S-MWL-NR4-21753-1696, indexable coolant-through boring bar, 10" OAL, 1.25" shank, 1.470" min. bore (2 available)
Category: Boring Bars
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: A20S-MWL-NR4-21753-1696
For sale: (2) Ultradex USA 21753-1696 A20S MWL-NR4, 10 x 1.25, used tooling accessories. Heavy-duty design perfect for robust applications. Manufacturer and model unknown. Condition: used. Contact for more., 2 - ultradex usa 21753-1696 A20S MWL-NR4 OAL: 10, Shank Diameter: 1.25, Tool Type: Indexable coolant-through ...more
Boring Bar, Valentine #BHP-NV-440, 2-1/8" cutting diameter, 2" shank diameter, 11-3/8" length
Category: Boring Bars
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: BHP-NV-440
2" x 11 3/8" VALENITE LOC-A-DEX(R), BHP-NV-440 BORING BAR, Shank diameter. 2", Cutting diameter. 2 1/8", Length. 11 3/8", Weight. 5LBS.
Boring Bar, Valentine #BHP-NV-500, 2-1/8" cutting diameter, 2" skank diameter, 16-3-32" length
Category: Boring Bars
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: BHP-NV-500
16 3/32" x 2" VALENITE 9T9 BHP-NV-500 LOC-A-DEX(R) BORING BAR, Shank diameter. 2", Cutting diameter. 2 1/8", Length. 16 3/32", Weight. 13LBS.
T R Wigglesworth Machinery has 24 more
listings in Boring Bars.
10" U.S. Shop Tools #RKT-10300A, aluminum boring jaws, 2-hole mounting
Category: Boring Jaws
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
New Old Stock tooling accessory for sale. Model RKT-10300A made from 6061-T6 solid extruded aluminum. Compatible with 10" chucks like Kitagawa and others. 2-hole mounting configuration. Serrations: 1.5mm x 60. Made in the USA., Part Number: RKT-10300A, Material: 6061-T6 Solid Extruded Aluminum Bar, Status: New Old ...more
U.S. Shop Tools #RKT-8300A, aluminum chuck jaws, w/ 9960M27 plug, mounting bolt, wrench
Category: Boring Jaws
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Used assorted U.S. Shop Tools featuring aluminum chuck jaws. Includes. Ideal for diverse tooling needs. Condition: used. Manufacturer: U.S. Shop Tools, Model: RKT-10300-A - 3 pcs, Jaws are 1.5mm × 60 metric fine-serrated aluminum 6061 round soft jaws with a 3" jaw height, sized for Kitagawa-pattern chucks. ...more
U.S. Shop Tools #RKT-8300A, aluminum chuck jaws, w/ 9960M27 plug, mounting bolt, wrench
Category: Boring Jaws
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Used assorted U.S. Shop Tools featuring aluminum chuck jaws. Includes. Ideal for diverse tooling needs. Condition: used. Manufacturer: U.S. Shop Tools, Model: RKT-8300A - 6 pcs, Includes: 1 - 9960M27 PLUG, 1- Mounting Bold, 1- Wrench, for 8" chucks, fits:, Kitagawa B08, B208, BB08, Samchully HS-08, HC-08, AutoStrong ...more
U.S. Shop Tools #RKT-8300A, aluminum chuck jaws, w/ 9960M27 plug, mounting bolt, wrench
Category: Boring Jaws
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Used assorted U.S. Shop Tools featuring aluminum chuck jaws. Includes. Ideal for diverse tooling needs. Condition: used. Manufacturer: U.S. Shop Tools, Model: RKT-8300A - 3 pcs, Includes 3 pcs - RKT-8300A, Priced to sell..
U.S. Shop Tools #RKT-8300A, aluminum chuck jaws, w/ 9960M27 plug, mounting bolt, wrench
Category: Boring Jaws
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Used assorted U.S. Shop Tools featuring aluminum chuck jaws. Includes. Ideal for diverse tooling needs. Condition: used. Manufacturer: U.S. Shop Tools, Model: RKT-8300A - 3 pcs, Includes 3 pcs - RKT-8300A, Priced to sell., for 8" chucks, fits:, Kitagawa B08, B208, BB08, Samchully HS-08, HC-08, AutoStrong N208 ...more
T R Wigglesworth Machinery has 6 more
listings in Boring Jaws.
Boring Mills, Horizontal, Table Type
1 Result
6" Giddings & Lewis #H6T, heavy duty table type horizontal boring mill, 36" spindle travel, 144" X, 120" Y, 30 HP, 1020 RPM, 1964
Category: Boring Mills, Horizontal, Table Type
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Giddings & Lewis
Model: H6T
Year: 1964
Giddings & Lewis H6T Heavy Duty Horizontal Table Type Boring Mill, used. s 144" X-axis table travel and 120" Y-axis head travel. Ideal for precise large-scale machining needs., MACHINE CAPACITIES, MODEL: 65-H6-T.INCHES.MILLIMETERS, Spindle diameter. 6 152.4mm, Spindle taper (ASA). Number 7 Number 7 (ASA), Spindle ...more
Cincinnati Milacron No. 220-8 Mdl. DR, centerless grinder, 3" capacity, 24" wheel diameter, 20 HP, 1034 RPM
Category: Centerless Grinders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cincinnati
Model: DR
Rebuilt: Gold Crown Machinery July 5, 1994, Grinding Capacity: Typically accommodates workpieces ranging from 0.25" to 3.5" in diameter., Grinding Wheel Size: Commonly 14" diameter grinding wheels., Regulating Wheel Size: Usually 8" in diameter., Workpiece Length Capacity: Up to 8" in length., Grinding Wheel Speed: ...more
Cincinnati Milacron No. 220-8 Mdl. DR, centerless grinder, 3" work rest, 20" x 8" x 12" wheel, 1977
Category: Centerless Grinders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cincinnati
Model: DR
Year: 1977
Work Diameter Capacity:, Standard work rest: 0 to 3, Maximum with low work rest: up to 4.75, Grinding Wheel:, Diameter: 15" to 20", Width: 1" to 8", Hole Diameter: 12", Motor Power: 20 HP, Regulating Wheel:, Diameter: 9.75" to 13", Width: 1" to 8", Hole Diameter: 5", Speeds: Variable, 15 to 300 RPM, Motor Power: 1.5 ...more
Cincinnati Milacron No. 220-8 Mdl. DR, centerless grinder, 3" work rest, 24" x 8" x 12" hole wheel, 20 HP, 1975
Category: Centerless Grinders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cincinnati
Model: DR
Year: 1975
Grinding Capacities:, Nominal Work Diameter Capacity: 0 to 3, Maximum Work Diameter Capacity (with new wheel): 4.75, Grinding Wheel:, Diameter Range: 17 to 24, Width Range: 1 to 8, Hole Diameter: 12, Motor Power: 20 HP, Speed: Approximately 1,034 RPM, Regulating Wheel:, Diameter Range: 9.75 to 13, Width Range: 1 to 8 ...more
Cincinnati Milacron No. 220-8 Mdl. DR, centerless grinder, 3" work rest, 24" diameter x 8" W x 12" hole wheel, 1973
Category: Centerless Grinders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cincinnati
Model: DR
Year: 1973
Work Diameter Capacity:, Standard work rest: 0 to 3, Maximum with low work rest: up to 4.75, Grinding Wheel:, Diameter: 24 maximum, 15 minimum, Width: 1 to 8, Hole Diameter: 12, Regulating Wheel:, Diameter: 12 maximum, 9.75 minimum, Width: 1 to 8, Hole Diameter: 5, Speed Range: 11 to 300 RPM, Grinding Wheel Drive: ...more
Cincinnati Milacron No. 220-8 Mdl. DR, centerless grinder, 24" x 8" x 12" wheel, diamond crush dresser, 1973
Category: Centerless Grinders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cincinnati
Model: DR
Year: 1973
Work Diameter Capacity:, Standard work rest: 0.063 to 3, With low work rest: up to 4.75, Grinding Wheel:, Diameter: 24 maximum, 17 minimum, Width: 1 to 8, Hole Diameter: 12, Speed: Up to 6,500 SFPM, Motor: 20 HP, 3-phase, 230/460V, Regulating Wheel:, Diameter: 13 maximum, 9.75 minimum, Width: 1 to 8, Hole Diameter: 5 ...more
T R Wigglesworth Machinery has 7 more
listings in Centerless Grinders.
Chain Hoists, Monorail and Trolley Cranes
1 Result
60 Ton, Crosby #TA, straight shank, 12" length, 3.75" diameter, alloy hook, 2005
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Crosby
Model: TA
Year: 2005
60 Ton, CROSBY STRAIGHT SHANK "HOOK ONLY" 2005 NEW IN BOX, MODEL TA, MODEL TA, "NEW IN BOX", TURNED,THREADED & DRILLED, CROSBY PART NO. 1024929, ACTUAL SHANK LENGTH 12", ACTUAL THREADED SECTION 4", SHANK TURNED DIAMETER 3 3/4", THREADS PER INCH 12 TPI, ACTUAL OVERALL LENGTH 34", ACTUAL OVERALL WIDTH 18", APPROX. ...more
Chemical and Processing Equipment - Miscellaneous
1 Result
Webster & Bennett, preferred premium lubricant
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
WEBSTER & BENNETT Premium Lubricant.
3 Ton, Schreiber #300AC, chiller, 36000 BTU/hr, 3 HP, 30 GPM @ 38 psi, R-22 refrigerant
Category: Chillers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: 300AC
Key, Cooling Capacity: 36,000 BTU/hr (3 tons), Compressor Power: 3 HP, Fan Motor Power: HP, Reservoir Capacity: 45 gallons, Flow Rate: 30 GPM at 38 PSI, Electrical Requirements: 3-phase, 208V/230V/460V, Amperage Draw: Approximately 18.0 amps at 230V and 9.0 amps at 460V, Refrigerant: R-22, Temperature Range: 35F to ...more
5 Ton, Schreiber Summit #Series-500AC, water chiller, 5 HP, R-22 refrigerant
Category: Chillers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Summit
Model: SERIES-500AC
Voltage: 460V, 3-phase, Refrigerant: R-22, with a charge of 14 lbs, Operating Temperature Range: 35F to 70F, Refrigeration System: Hermetically sealed with a stainless steel tank, Fan Motors:, Horsepower: HP, Voltage: 220/230/440V, 3-phase, Frequency: 50-60 Hz, RPM: 1140, Overload Protection: Automatic, internal ...more
78.8 Ton, Multistack / Airstack #ASP030XC13H2AS1AAAS-410A, 206 GPM, 50 gallon reservoir, R-410A refrigerant, 2012
Category: Chillers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Multistack
Model: ASP030XC13H2AS1AAAS-410A
Year: 2012
Used Multistack / Airstack Free Cool Chiller Model ASP030XC13H2AS1AAAS-410A. Rated 78.8 tons. 206 GPM total flow rate (68.7 per module). System consists of (4) modules, (3) Free Cool chiller modules and (1) glycol feeder module with 50 gallon reservoir. R-410A refrigerant, 125lb charge per module. 3/60/460V., Module 1 ...more
DeVlieg, clamping hardware
Category: Clamps
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
DEVLIEG Clamps.
Steal clamping hardware
Category: Clamps
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
_UNKNOWN_ Clamps.
Clamps and Vises
3 Results
Kurt #D688, vise
Category: Clamps and Vises
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kurt
Model: D688
Kurt D688 Vise with an adjustable stop, KURT D688.
Angle Vise, 90 degree
Category: Clamps and Vises
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Expands.0 - 6 1/8 inch, Height. 7 1/16 inch, Length. 17 1/2 inch, Width.7 1/2 inch, 4 bolt holes to secure to machine table, Weighs.82LBS as is, _UNKNOWN_ _UNKNOWN_.
6" Manual Rotating Vise
Category: Clamps and Vises
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
360 Degree 6" Manual Rotating Vise, UNKNOWN UNKNOWN.
CNC Horizontal Boring Mills - Table Type
2 Results
5.1" Fermat #WHN13P, CNC table type horizontal boring mill, 137.7" X, 78.7" Y, 49.2" Z, 31.4" W, 62.9" x70.8" tbl., 3000 RPM, 60 HP, CAT 50, Fanuc 0i-MF Plus, 2025, new
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Fermat
Model: WHN13P
Year: 2025
Discover precision with the FERMAT WHN13P CNC Horizontal Boring Mill. a 5.11" spindle, 60 hp, and a 62.9" x 70.8" rotary table, handle workpieces up to 26,455 lb. Experience the sophistication of FANUC FS 0i-MF PLUS control today., HEADSTOCK V130, SPINDLE DIAMETER. 5.11", MAXIMUM SPINDLE SPEED. 3000 RPM, SPINDLE MOTOR ...more
Femco #BMC-110R2, CNC table type horizontal boring mill, 60 automatic tool changer, 2500 RPM, CT-50, 35 HP, full B-axis rotary table, 13,889 lb. load, 19.69" width, Fanuc, new
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Femco
Model: BMC-110R2
#50 Taper, 35 HP Geared Head Spindle, Full B Axis Rotary Table, linear scales on X, Y & Z, chip conveyor, Fanuc CNC control. Delivery, Installation and Training, Spindle Speed. 2,500 RPM (CT-50 Taper 30/35 HP), Through Spindle Coolant, 60 Tool ATC, Full B-Axis Rotary Table (13,889 Lbs. Load Capacity), Travel ...more
CNC Horizontal Spindle Surface Grinders
2 Results
17" x 44" Kent #KGS-410AHD, 12" x 1 1/4" x 5" wheel, power elevation, automatic downfeed increments
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kent
Model: KGS-410AHD
This is a column traveling grinder, with direct drive precision cartridge wheel spindle, power elevation, automatic down feed increments 0.0002"~ 0.0016" with 6 steps available. A wheel spindle, table and coolant can be preset for auto, stop after auto, down feed and sparkout completed. Is also a magnetic chuck, chip ...more
Blanchard #54-100, CNC rotary surface grinder, 130" sw, 100" chuck, 54" wheel diameter, 125 HP
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Blanchard
Model: 54-100
, Chuck Size 100, Max. Height over Chuck 24, Max. Swing Diameter 128, Max. Weight Capacity 30,000 lbs., Chuck Pole Spacing 1-1/16, Center Hole 4, Grinding Wheel Diameter 54, Chuck Segments 12-CD-54, 11-x 2-1/4x6, Wheel Speeds 270 RPM, Chuck Speeds 2.6, 4.1, 6.7, 10.2 RPM, Chuck Motor 1200 RPM, 60 Cycle, Table Traverse ...more
Acer #ATL-1840E, CNC teach lathe, 18.1" swing, 9.06" swing over cross slide, 35.4" centers, 2.2" bore, D1-6, 60-3000 RPM, 10 HP, Fagor 8055 i/A-TC, flat bed
Category: CNC Lathes and Turning Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Acer
Model: ATL-1840E
ACER 1840E, FAGOR 8055 i/A-TC, 2.2", S:, * 10 HP SINGLE SPEED SPINDLE MOTOR FOR 3 PHASE 60 HZ WIRING, * HARDENED AND GROUND MEEHANITE CASTING BEDWAY, * HARDENED AND GROUND GEARS AND SPINDLE, * 2 GEAR RANGES: LOW - 60 - 6,000 RPM; HIGH - 601 - 3,000 RPM, * D1-6 CAMLOCK WITH 2.2" SPINDLE BORE, * "FAGOR" 8055 i/A-TC ...more
Haas #SL-20BB, CNC lathe, 21" swing, 10" chuck, 2.5" bar, 13" diameter, 23" length, 30 HP, 3400 RPM
Category: CNC Lathes and Turning Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Haas
Model: SL-20BB
HAAS SL-20BB CNC Lathe with HAAS CNC Control, 20" swing, 10" chuck, 2.5" bar capacity, 30 hp power, max 3,400 RPM, and 10" turning diameter. Dimensions: 143" x 90" x 92". Weight: 8,820 LBS., Bar Capacity. 2.5", Chuck Size. 10", Spindle Speed. 4,000 RPM, Spindle Motor. 60 HP, X Axis Travel. 8.4", Z Axis Travel. 22.5" ...more
Haas #ST-20, CNC horizontal lathe, 31.7" swing, 8" chuck, 3-jaw, 2" bar, 12 turret, 20 HP, 4000 RPM, tailstock, 2012
Category: CNC Lathes and Turning Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Haas
Model: ST-20
Year: 2012
2012 HAAS ST-20 CNC Horizontal Lathe in used condition, featuring a 31.75" swing, 20.5" machining length, 8.3" 3-jaw chuck, 12-station turret, 2" bar capacity, 20 hp power, max 4,000 RPM, and 15" turning diameter. Tailstock & Bar feeder included. s also include: 195/260 Volts, 3-Phase, Haas Controls, Slant Bed ...more
Hardinge #Conquest-T42, CNC turning center, 21.2" swing, 6" chuck, 1.6" bar, 9" diameter, 13.1" length, 10 HP
Category: CNC Lathes and Turning Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Hardinge
Model: CONQUEST-T42
Year: 1997
* Fanuc 18-T Control, * 5000 RPM, * 10 HP Spindle, * Coolant System with Chip Conveyor, * 6 ID Tool Holders, * ~50 Collets, * 10 Straight & Right Angle Milling and Drilling Live Tools, * 8838.3 Hours, Swing. 21", Machining Length. 13", Chuck Size. 6", Bar Capacity. 1.625", Power. 10 HP, Speed. 5000 RPM, Turning ...more
Okuma #Captain-L370, CNC lathe, 20.8" swing, 8" chuck, 1.9" bar, 14.5" dia., 20.47" lgth, 20 HP, 4500 RPM, OSP E100L, 2001
Category: CNC Lathes and Turning Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Okuma
Model: CAPTAIN-L370
Year: 2001
2001 OKUMA CAPTAIN L370 CNC Lathe, 20.8" swing, 20.47" machining length, 8" chuck, 1.97" bar capacity, 20 HP, 4,500 RPM, 14.5" turning dia. s Okuma OSP E100L CNC control and 12-station turret. Ideal for precision machining., Control: Okuma OSP E100L CNC, Chuck Size: 8, Bar Capacity / Spindle Bore: ~2.0 ( 50 mm) ...more
T R Wigglesworth Machinery has 1 more
listing in CNC Lathes and Turning Centers.
CNC Machine Controls
1 Result
G.E. Fanuc #0M, CNC Control, Complete Pannel Reclaimed from running machine at time of decomitioning, 1996
Category: CNC Machine Controls
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: General Electric
Model: 0M
Year: 1996
GE FANUC OM CNC Control Panel, reclaimed, used from a running machine at decommissioning, available. Model 0M, year 1996, shipped skidded, strapped, and wrapped. Ideal for those seeking quality N/C & CNC controls supplies., G.E. FANUC OM CNC CONTROL, COMPLETE PANNEL RECLAIMED FROM RUNNING MACHINE AT TIME OF ...more
CNC Plasma Cutting Systems (Flame Cutters)
2 Results
Esab #PowerCut-650, self contained plasma cutter, PT-31XLPC torch, air regulator
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Esab
Model: POWERCUT-650
The Powercut 650 is a compact, completely self-contained, 208 / 230, Plasma cutting system. As shipped, the system is fully assembled and ready to cut after being connected to input, Power and a source of prefiltered compressed air (90-150, psi)., The Powercut 650 package uses the PT-31XLPC torch, to deliver cutting ...more
Torchmate #TorchMate-X, plasma cutters, 5' x10' table, 2023
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Torchmate
Model: TORCHMATE-X
Year: 2023
Physical dimensions are roughly 130"x70" for the entire table. Cutting area is 60"x120"., 125Amp 460v power Lincoln Flex Cut Plasma - 50ft torch cord length -- currently has ~9000 pierces on it., 5x10 table with lower reservoir for water storage, rebuilt in 2023: new servo motors, torch head, plasma power source, cnc ...more
55 Ton, Amada #Promecam-HFB-5020, CNC hydraulic press brake, 6.8' overall, 65.35" between housings, 7.87" stroke, 16.5" throat, 18.5" open height, 1996
Category: CNC Press Brakes
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Amada
Model: PROMECAM-HFB-5020
Year: 1996
Explore precision with the used 1996 AMADA PROMECAM HFB 5020, a 55-ton CNC hydraulic press brake. s include 82.09 max bending length, 18.50 open height, and Amada Operateur CNC control. Power: 8.45 HP; Dimensions: 104 × 85 × 100., Tonnage Capacity: 55 US Tons, Maximum Bending Length: 82.09, Distance ...more
CNC Rotary Tables and Indexers
2 Results
26" x 26" DeVlieg, rotary table
Category: CNC Rotary Tables and Indexers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
DEVLIEG 26" x 26".
40" x 20" DeVlieg, rotary table
Category: CNC Rotary Tables and Indexers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
DEVLIEG 40" x 26".
CNC Vertical Boring Mills – including VTLs
1 Result
96" Giddings & Lewis #84VTC, vertical boring mill, 108" swing, 90" under rail, 12 ATC, Renishaw probe, chip conveyor, 2001
Category: CNC Vertical Boring Mills – includin...
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Giddings & Lewis
Model: 84VTC
Year: 2001
G&L 8000 CNC Controls, #60 Tooling, Chip Conveyor, 12 Station ATC, Renishaw Probe, Table Jaws, Elevating Rail, Make: Giddings & Lewis, Model: 84VTC, Table Diameter. 96, Swing. 108, Table speed. 200 RPM, Max under the rail. 90, Ram Stroke. 57, Ram Size. 8 X 8, 12 Station ATC, #60 Tooling, G&L 8000 CNC ...more
Lexair #ProDyne, collet chuck, fits Haas ST-30 CNC lathe
Category: Collet Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Fits a Haas ST-30 CNC Lathe., Lexair Inc. ProDyne Chuck.
Kent #KGS-84AHD, main control valve
Category: Control Valves
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kent
Model: KGS-84AHD
KENT KGS-84AHD.
Newall #DP-7, digital readout system, 2-axis
Category: Digital Readout Systems
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Newall
Model: DP-7
DIGITAL READOUT, NEWALL, ANY, MODEL 7B211000, 41" SCALE, 36.5" SCALE, DIGITAL READOUT UNIT, DP7 BOX, MODEL 7b211000, SERIAL NO.090905, SPHEROSYN SCALE 41" LONG, SPHEROSYN SCALE 36.5 LONG, READER HEADS & CABLES, POWER CORD, ONLY PARTIAL BRAKETRY & HARDWARE, LAST DEMONSTRATED TO BE IN GOOD WORKING ORDER. ...more
Sony #LH-51, digital readout system, 4-axis, cables, 13" x 13" x 13" box
Category: Digital Readout Systems
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Sony
Model: LH-51
SONY LH 51 3-AXIS DIGITAL READOUT SYSTEM and CABLES ONLY, Box 2, Sony DRO, Model LH51-3, Serial # H513 103579, Box Size: 13 x 13 x 13 box, 12 lbs., Box labeled as 2 of 2, however it is a single box with only a DRO head unit with AB switch..
Drill & Mill Box Tables
1 Result
Box table, 20 x 18, heavy duty plain T-slotted
Category: Drill & Mill Box Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: BOX TABLE
The plain box table is 20 Wide x 18 Deep x 18 High, T-slotted on top & face, The plain box table is 20 Wide x 18 Deep x 18 High, T-slotted on top & face, Sold "AS, IS.", Skidded, Strapped & Wrapped.
Sellers #4G, 220, 1 HP
Category: Drill Sharpeners
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Sellers
Model: 4G
SELLERS, No. 4G, 220, 1 H.P., SELLERS 4G.
Drill Masters Eldorado Tool, 4 boxes assorted gundrill tool holders, carbide inserts, guide pads & Torx Plus screws, 15/32"-9/16" diameter
Category: Drill Tooling
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Eldorado
Multiple Indexable Guide Pads and Screws, Inserts for GunDrills., Includes the following:, Box 1:, Manufacturer: Drill Masters Eldorado Tool, Part Number: TSTS000326, Item Type: Indexable Guide Pads (TSTS-GC04A-P), Size:.4724.5507 inches, Compatible Drill Diameter: Fits gundrills with a cutting diameter range of 12.00 ...more
Kyocera #DR2875, 2.875" diameter, thru spindle coolant
Category: Drill Tooling
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kyocera
Model: DR2875
Kyocera DR2875 indexable tooling available. Manufactured by Kyocera, this used model can be a valuable addition to your toolkit. Perfect for various industrial applications. Contact for more., KYOCERA DR2875 2.875" Diameter Coolant Through CNC Tooling Excellent Condition.
MetalFlex #90W 4CC, spiral duct lock former, 6"-24" capacity, 3/4" krimper, 9/16" unwinder, 15/16" pivot, PLC control, 1991
Category: Duct Formers and Lines
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Year: 1991
For sale: 1991 MetalFlex 90W 4CC Spiral Duct Lock Former. s include up acting automatic saw, feed tables, PLC control, 7.5 HP motor, lubrication pump, krimper, unwinder, and a 15 KVA transformer., YEAR: 1991, Manufacturer MetalFlex, model 90W 4CC, Capable of Producing 6" - 24" SPIRAL DUCT, PLC CONTROLLED, Up acting ...more
28" x 118" Whacheon #HL720, 15" chuck, 3-jaw, Sony 2-Axis digital read out, rapid traverse, Steady Rest, 1999
Category: Engine Lathes
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Whacheon
Model: HL720
Year: 1999
Used 1999 Whacheon HL720 Engine Lathe for sale. s 28.3" swing, 118.11" centers, and a 3" spindle bore. Powered by a 15 HP motor., a Sony 2-axis DRO, 15" Buck 3-jaw chuck, and coolant system. Ideal for versatile shaft machining tasks., YEAR of MFG; 1999, Model HL 720, Capacity:, Swing Over Bed. 28.34", Swing Over ...more
Floor Plates and Bed Plates
3 Results
21" x 48" x 2" steel, T-slotted machine plate
Category: Floor Plates and Bed Plates
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: T-SLOTTED MACHINE PLATE
MACHINE PLATE, 21" WIDE x 48" LONG x 2" THICK, (4) T-SLOTS, WIDTH.48", LENGTH.72", THICKNESS.9", NO. OF T-SLOTS.4.
55" x 60" x 9" T-slotted floor plate, coolant trough
Category: Floor Plates and Bed Plates
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: COOLANT TROUGH
FLOOR PLATE, 55" x 60" x 9", (5) T-SLOTS WITH COOLANT TROUGH, WIDTH.48", LENGTH.72", THICKNESS.9", NO. OF T-SLOTS.5, WITH COOLANT TROUGH.
55" x 96" x 8" floor plate, coolant trough
Category: Floor Plates and Bed Plates
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: COOLANT TROUGH
FLOOR PLATE, 55" x 96" x 8" THICK, WITH COOLANT TROUGH, VERY NICE, WIDTH. 55", LENGTH. 96", THICKNESS. 9", NO. OF T-SLOTS. 5, S:, COOLANT TROUGH.
Gantry Type Bridge Cranes
1 Result
10 Ton, Detroit, hoist gantry bridge crane, 80 FPM
Category: Gantry Type Bridge Cranes
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Detroit
Detroit Hoists Gantry Bridge Crane, 10 Ton capacity; used condition. s include 4 P.D. reeving, 13 FPM hoist speed, 7.5 kW motor, 230/460/3/60 VAC power, 80 FPM trolley speed, and dual 0.55 kW trolley motors., Reeving: 4 P.D., Hoist speed: 13 FPM., Hoist motor: 7.5 kW., Power supply: 230/460/3/60 VAC., Trolley speed: ...more
Grinding Fixtures/Attachments
1 Result
Norton #66253284353, 34" x 4-1/2" x 12" heavy duty grinding wheel
Category: Grinding Fixtures/Attachments
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Norton
NORTON 34" X 4 1/2" X 12" Heavy Duty Grinding Wheel, Made in the U.S.A., NORTON ABRASIVES 66253284353.
Roura #2T-3/16-135, self-dumping scrap hopper, 1/2 cu. yd., 36" width x 47" front-to-back x 24" D, forklift pockets, casters (2 available)
Category: Hoppers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Roura
Heavy-duty steel scrap hoppers forklift pockets, manual dumping mechanisms, reinforced upper edges, and caster-mounted bases for easier positioning. Previously designated for aluminum scrap., Bin size: 36 width × 47 front-to-back × 24 deep, Estimated weight: 450 lb each, Quantity available: 2 ...more
Dayton #3GRU9, coolant pump, 230/460 V., mounting bracket
Category: Hydraulic Pumps
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Dayton
Dayton coolant pump with bracket and hardware for mounting to machine. Was originally from an Excel CNC machine., Output.1/4HP, Cycle.50/60Hz, Volt.230/460V, Max Amp. 1.1/.6A, Phase.3, Class.E, Series Date.1808, Mod.3GRU9, All together weighs 42LBS, DAYTON 3GRU9.
Hydraulic Straightening Presses
1 Result
150 Ton, Press Master #GSP-150T/68, adj ram head straightening head, 12" stroke, 15.5" daylight, 10" bore, 72" x96"bed, 2015
Category: Hydraulic Straightening Presses
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Press Master
Model: GSP-150T/68
Year: 2015
150 Ton, PRESSMASTER, MODEL GSP-150T / 68, Year of MFG. 2015, 12" Stroke of Ram, 72" x 96" Bed, Travelling Column, Fully adjustable Straightening Press, s:, 2 handheld remotes, MOEL: GSP-150T / 68, RATED CAPACITY, TONNAGE. 150, STROKE. 12", BORE. 10", RAM SPEED PRESS. 6 IPM, ADVANCE. 24 IPM, RETURN. 28 IPM, TABLE SIZE ...more
Induction Heating Generators & Power Supplies
1 Result
10 KW Radio Frequency #10000, induction heating generator, 230 V., 3-phase, 50 Amps
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
The Radio Frequency Company Model 10000, Type IND is an industrial-grade RF heating system, Output: 10KW, Volts: 230, Phase: 3, Amps: 50, RADIO FREQUENCY 10000.
Heald #273A, internal grinder, 28" swing, 14" grinding bore, 20" table travel, 5 HP, 3-Axis digital read out, 1987
Category: Internal Grinders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Heald
Model: 273A
Year: 1987
HEALD 273A internal grinder, used, s a 28" swing and a 14" max grinding bore. It includes a 15.9" stroke, 20" travel-long, 90-degree workhead swivel, 1.5 hp workhead power, 5 hp wheel power, and a dresser. Ideal for precision tasks., Swing 28" 711.2 mm Max Grinding Bore 14" 355.6 mm Stroke 15.9" 403.86 mm Travel-Long ...more
10" x 100.75" Gckel #G65EL, knife grinder, 100.75" X, 10" Y, 7" Z, 30 HP
Category: Knife Grinders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Gckel
Model: G65EL
Year: 1994
Used Gckel G 65 EL knife grinder (1990) with 100.75 grinding length, 10 width, 7.09 height, 30 HP power, and table tilt of 90., Grinding Length.100.75, Grinding Width. 10, Grinding Height. 7.09, Grinding Power. 30 HP, X Axis. 100.75, Y Axis. 10, Z Axis. 7, Table Tilt. +/- 90, Speed Range. 0.0787 inches/min 1181.1 ...more
Cushman, 4-jaw chuck, 2-3/16" thru hole
Category: Lathe Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cushman
2 3/16" Thru Hole, CUSHMAN 4-Jaw Chuck.
12" Cushman, 3-Jaw chuck, 3" thru hole, A8 back
Category: Lathe Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cushman
3" Thru Hole & A8 Back, CUSHMAN 3-Jaw Chuck.
12" Skinner Co., 4-jaw chuck, 3" thru hole
Category: Lathe Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Skinner
3" Thru Hole, SKINNER 4-Jaw Chuck.
12" Bernard, 4-Jaw manual chuck, 3" thru hole, D1-8 Camlock back
Category: Lathe Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Pratt Burnerd Flat Back 12" 4-Jaw Chuck. 3" Thru Hole & D1-6 Camlock Back Mounting Plate. Reversible Top Jaws., Ships Immediately!, PRATT BURNERD 1357 31025.
18" Cushman, 4-jaw manual chuck, A-11 back, 5" thru hole
Category: Lathe Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cushman
18" Diameter with A-11 Back & 5" Thru Hole, CUSHMAN 4-Jaw Chuck.
T R Wigglesworth Machinery has 10 more
listings in Lathe Chucks.
32" x 4 8" x 8" cast steel mill sub table, T-slotted, excellent
Category: Layout Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
SUB TABLE, CAST STEEL, MILL, 32 " WIDE X 48" LONG X 8" TALL, T-SLOTTED, EXCELLENT, SUB TABLE, CAST STEEL, MILL & SCRAPED, 32 " WIDE, 48" LONG, 8" TALL, T-SLOTTED, EXCELLENT.
43-1/2" x 20" aluminum layout table (2 available)
Category: Layout Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
_UNKNOWN_ _UNKNOWN_.
Aluminum layout table
Category: Layout Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
_UNKNOWN_ _UNKNOWN_.
King #84, Vertical Boring Machine Parts Manual
Category: Machinery Manuals
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: King
Model: 84
KING 84.
King 42" Vertical Boring Mill Installation, Maintenance and Repair Manual
Category: Machinery Manuals
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: King
This is a King 42" Vertical Boring Mill Installation, Maintenance, and Repair Manual, KING 42.
King Electrically Operated Vertical Boring Machine 30", 36", 46", 56", 66", 76" Service Manual
Category: Machinery Manuals
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: King
This manual is for the operations, lubrication system, and repair parts for the King Electrically Operated Vertical Boring Machine. Models 30", 36", 46", 56", 66", 76"., KING 30", 36", 46", 56", 66", 76".
Webster & Bennett, " R" Operations Manual Only for 48" vertical turret lathe
Category: Machinery Manuals
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
WEBSTER & BENNETT R Manual.
Webster & Bennett F.R.N.C. and E.R.N.C. Maintenance and Parts Manual
Category: Machinery Manuals
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
WEBSTER & BENNETT F.R.N.C. & E.R.N.C.
T R Wigglesworth Machinery has 2 more
listings in Machinery Manuals.
Magnetic Chucks
4 Results
12-3/4" Walker, Round Magnetic Chuck
Category: Magnetic Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Walker
12 3/4" ROUND PERMENANT MAGNETIC CHUCK, WALKER, GRINDER, 12 3/4" x 12 3/4" part., Weight ~ 99 lbs. with skid., Boxed: 18" x 18" x 12".
25" x 15-7/8" Makino #A-77, electromagnetic chuck, 24-7/8" x15-3/4" milled area, 5-1/4" overall height
Category: Magnetic Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: A-77
Used Electro-permanent Magnetic Chuck by TECNOMAGNETE, Model QX406. Dimensions: 25" x 15.875" x 5.25". Milled specifics: 24.875" x 15.75". Removed from a Makino 800mm pallet. Ready for loading onto the truck as-is., Brand Unknown, we suspect Tecnomagnete., Model Unknown, we suspect QX 406, "As is untested. Loaded on ...more
25" x 15-7/8" Tecnomagnete #QX406, electro-permanent magnetic chuck, 24-7/8" x15-3/4" milled area, 5-1/4" overall height, AS IS
Category: Magnetic Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: QX406
Used Electro-permanent Magnetic Chuck by TECNOMAGNETE, Model QX406. Dimensions: 25" x 15.875" x 5.25". Milled specifics: 24.875" x 15.75". Removed from a Makino 800mm pallet. Ready for loading onto the truck as-is., Brand Unknown, we suspect Tecnomagnete., Model Unknown, we suspect QX 406, "As is untested. Loaded on ...more
Makino #A-77, magnetic chuck controls
Category: Magnetic Chucks
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: A-77
MAKINO A-77.
Milling Attachments
1 Result
Lucas, right angle milling attachment
Category: Milling Attachments
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Lucas
Year: 1982
LUCAS RIGHT ANGLE MILLING ATTACHMENT, HEAVY DUTY, 400 R.P.M., #50 TAPER, SERIAL NO. 36RAMA8283, YEAR OF MFG. 1982, THROAT DEPTH. 36", TAPER. #50NST.
Plain Cylindrical Grinders
1 Result
Livnica Kikinda #A11-550, plain outside dimension cylindrical grinder, 16" x 1-9/16" x 5" wheel, hydraulic table traverse, 1995
Category: Plain Cylindrical Grinders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Livnica Kikinda
Model: A11-550
Year: 1995
Kikinda A11-550 Plain OD Cylindrical Grinder, manufactured in 1995, is available. This used model showcases Kikinda's engineering in precision grinding solutions. Ideal for enhancing manufacturing efficiency., YEAR:1995, MODEL: A11-550, DISTANCE BETWEEN CENTERS. 20", HEIGHT OF CENTER. 5 5/16, MAXIMUM GRINDING ...more
8' -19" Ooya, #5MT spindle, 10 HP main spdl drive, 1979
Category: Radial Drills
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Ooya
Year: 1979
For sale: 1979 OOYA RE3-2500 radial arm drill press. include 8' arm, 19.5" column diameter, 10 hp, 2,180 RPM, and 3" steel drilling capacity. s include T-slotted base, auto lubrication, and coolant system. Ready for heavy-duty tasks., MODEL: RE3-2500, YEAR: 1979, DRILLING CAPACITY ------ ( STEEL ) -------- 3" ...more
Reciprocating Surface Grinders - Horizontal Spindle
4 Results
8" x 16" Kent #KGS-200, horizontal reciproc table surface grinder, 8" dia. x 1" W x 1.25" bore wheel, 2850 RPM, Kanetsu PMC, Sony digital read out, 1997
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kent
Model: KGS-200
Year: 1997
KENT KGS-200 Surface Grinder for sale, 1997 model with horizontal spindle. s 18" x 6" table, 1.5 hp motor, and 8" grinding wheel. Dimensions: 57.9" x 46.1" x 85.4". Ideal for precision work with 265 lbs max table load. 1400 lbs net weight., This Unit s; A Kanetsu permanent magnetic chuck & Sony brand digital ...more
11" x 23" Acer #AGS-1224AHD, automatic horizontal surface grinder, 14" x 1.25" wheel, 5 HP, coolant tank, dust filter, 1999
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Acer
Model: AGS-1224AHD
Year: 1999
Explore precision with the used ACER AGS-1224AHD automatic surface grinder. Featuring an 11" x 23" table and a horizontal spindle with a 5 HP motor, it is a 1.25" wide, 14" diameter grinding wheel for efficient operations., Used ACER AGS-1224AHD Reciprocating Surface Grinder: 11" x 23" table, 5 HP horizontal spindle ...more
24" x 80" Kent #KGS-620AHD, surface grinder, 14" x 2" x 5" wheel, 87.75" long., 26" cross, 1740 RPM, 10 HP, electromagnetic chuck, automatic downfeed, 2025
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Kent
Model: KGS-620AHD
Year: 2025
Introducing the new KENT KGS-620 AHD Surface Grinder. Featuring hydraulic table, automatic downfeed, and a 24" x 80" electromagnetic chuck. Precision-focused with effortless operation, making it ideal for accurate grinding tasks., Hydraulic table and electronic crossfeed, Automatic incremental downfeed, Column feed ...more
72" x 196" Thompson #16CX, horizontal reciprocating surface grinder, 20" x 12" x 8" wheel, 75-100 FPM, electromagnetic chuck, PLC Control, power elevation, 1967
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Thompson
Model: 16CX
Year: 1967
THOMPSON 16CX Grinder, with way or reciprocating table and horizontal spindle, manufactured in 1967. This used machine offers robust construction and a time-tested design ideal for various grinding tasks. Contact us for more., TABLE SIZE. 72" X 196", GRINDING CAPACITY. 84" X 206", WIDTH BETWEEN GUARDS. 93", VERTICAL ...more
Ransohoff #IMMERSO-JET, Tumble Basket Batch Parts Washing System, 1999
Category: Rotary Drum Parts Washer
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Ransohoff
Model: IMMERSO-JET
Year: 1999
RANSOHOFF, No. IMMERSO-JET, 1999, TUMBLE BASKET BATCH WASHING SYSTEM, 1999 RANSOHOFF IMMERSO-JET.
Rotary Table Surface Grinders - Horizontal Spindle
1 Result
Mattison #The-Big-Swinger, horizontal spindle rotary type surface grinder, 120" sw, 144" sw, 48" under wheel, 66" under diameter, 1977
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Mattison
Model: THE-BIG-SWINGER
Year: 1977
MATTISON 1977 The Big Swinger available. 120" chuck, 144" swing, 48" under wheel, 66" grinding wheel, 300 HP. s quick tilt head, DC braking, and more. Ideal for rotary surface grinding. Great addition to your workshop., Machining dimensions for Mattison 96-28:, Magnetic chuck diameter: 120 inches, Maximum swing inside ...more
Rotary Table Surface Grinders - Vertical Spindle
3 Results
Blanchard #20K-36, rotary surface grinder, 36" magnetic chuck, 40 HP, 42" swing, 16" under wheel, 20" wheel diameter, 18" vertical range
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Blanchard
Model: 20K-36
Used BLANCHARD 20K-36 Rotary Surface Grinder s a 36" magnetic chuck, 40 hp power, and a 42" swing. auto lubrication, oil skimmer, and conveyor base option. Compact with a 20" grinding wheel and multiple chuck speeds. The machine is the conveyor base option, and a sludge tote box for heavy duty grinding., 36" Magnetic ...more
Blanchard #72HD-120, heavy duty vertical spindle rotary surface grinder, 144" swing, 120" chuck, 72" wheel, 200 HP
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Blanchard
Model: 72HD-120
BLANCHARD 72HD-120 rotary surface grinder available in used condition. s a 120" chuck, 144" swing, 72" grinding wheel diameter, vertical spindle, and 200 hp power. Ideal for large-scale precision grinding., Machine type: Vertical-spindle rotary surface grinder., Main motor power: 200 HP, Grinding head: The spindle ...more
Blanchard #76HD-120, vertical spindle rotary surface grinder, 120" magnetic chuck, 76" wheel diameter, 144" swing, 300 HP, 45" under wheel
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Blanchard
Model: 76HD-120
BLANCHARD 76HD-120 rotary surface grinder for sale. s a 120" chuck size, 300 HP power, 164" swing, and 76" grinding wheel diameter. Ideal for heavy-duty applications, this used machine ensures efficient vertical grinding., Machine type: Vertical-spindle rotary surface grinder, Magnetic chuck diameter: 120 inches (3048 ...more
6" x 84" Lucas, air lift rotary table, 6" x 7' x 6'
Category: Rotary Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Lucas
Lucas air lift rotary table, 6 inches thick X 7 ft X 6 ft, 13 inches tall, Capacity 38,000, LUCAS _UNKNOWN_.
8" Nikken #CNC-200FA, CNC rotary table, 4-Axis
Category: Rotary Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Nikken
Model: CNC-200FA
8in Nikken CNC rotary table, model CNC-200FA, Serial # 3105, 8in Nikken CNC rotary table, model CNC-200FA, Serial # 3105, Item,. Metric Value.Imperial Value (inches), Diameter of Table 200 mm. 7.874 in, Diameter of Spindle Hole 50 mm. 1.969 in, Centre Height 150 mm. 5.906 in, Width of T Slot 12 mm. 0.472 in, Net ...more
12.5" Enco, rotary table, 90 deg. Tilt
Category: Rotary Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Enco
Tilts 90 Degrees, Surface diameter. 12 1/2", Tilts 90 Degrees, 360 Degree rotating table, Shipping Dimensions: 34" x 34" x 25".
36" x 48" Five K, 6-3/8" OAH, Shot pin location on 90' s, excellent
Category: Rotary Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Five
Model: K
36" x 48", FIVE "K" BRAND, ROTARY TABLE WITH AIR LIFT, EXCELLENT CONDITION !, DIMENSIONS:, SURFACE AREA. 36" x 48", NO OF T_SLOTS. 8, OVER ALL HEIGHT. 6 3/8", VENIER SCALE. YES, AIR LIFT OPERATION. YES, CONDITION. 8 OUT OF 10, AVAILABLE FOR INSPECTION BY APPOINTMENT., OFFERED "AS IS", SKIDDED, STRAPPED & WRAPPED..
84" x 120" Lucas, heavy duty airlift rotary table, air clamps on rotation, 1981
Category: Rotary Tables
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Lucas
Year: 1981
84" x 120", LUCAS ROTARY TABLE WITH AIR LIFT, NEW 1981, EXCELLENT CONDITION !, NEW: 1981, S/N: 60BP0224, 38,000 LBS LOAD CAPACITY, 60" BASE PLATE DIAMETER, 15 1/2" TALL BASE TO TABLE SURFACE, TABLE ROTATIONS IS MANUAL - NOT POWERED, LOCKING BOLT (LOCK PIN) LOCKS AT 90 DEGREE 4-POSITION, TABLE TOP COOLANT TROUGH ...more
Single Crank OBI Flywheel Press Machines
2 Results
28 Ton, Walsh #28, OBI punch press, 2.5" stroke, 9.5" Shut Height, 2" adj., 6" throat, 21.75" x12" bed, 135 SPM
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Walsh
Model: 28
Capacity: 28 tons, Stroke: 2.5 inches (some variants may have 3 inches), Shut Height (SDAU): 9.5 inches to top of bed, Slide Adjustment: 2 inches, Bed Area: 21.75 inches (Left-Right) × 12 inches (Front-Back), Slide Area: 10 inches (Left-Right) × 9 inches (Front-Back), Throat Depth: 6 inches, Opening ...more
150 Ton, Minster, 6" stroke, 6" Shut Height, 4" bolster, air clutch, cushions, under power
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Minster
Year: 1959
150 Ton, MINSTER, 6" STRK, 6" SH HT, 4" BOLSTER, AIR CLUTCH, CUSHIONS, UND PWR, VARIABLE STROKES PER MINUTE. 33-980 SPM, MAX. SHUNT HEIGHT ADJUSTMENT. 6", STROKE. 6", BED SIZE. 30" X 50", SHUNT HEIGHT TO BED. 21", RAM SIZE. 24" X 36", MAIN MOTOR. 15 HP, 1800 RPM, APPROX. FLOORSPACE REQUIRED. 73" X 171", 4" BOLSTER ...more
Lees-Bradner #12, 8" x 102", 4" hob capacity, 24" swing, 6" spindle hole
Category: Spline Hobbers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Lees-Bradner
Model: 12
8" x 102", LEES-BRADNER, No. 12, 4" HOB CAP., 24" SWING, 6" SPINDLE BORE., MODEL SH, MAX. HOBBING CAPACITY (4" HOB). 8 3/4", HOLE THRU WORKSPINDLE. 6 7/16", CAPACITY BETWEEN CENTERS. 102", SWING OVER WAYS. 24", SWING OVER CARRIAGE. 12", MAX. HELIX ANGLE. 45 DEG., MAX. HOB LENGTH. 4", MAX. HOB DIAMETER. 4", AXIAL SHIFT ...more
Swiss Type and Lathe CNC Automatic Screw Machines
2 Results
Hardinge #ST-25, swiss type automatic screw, 1" bar capacity, 9.65" length, 200-6300 RPM, 7.3 HP, Fanuc 18-T, LNS Express 226 bar feed, 1999
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Hardinge
Model: ST-25
Year: 1999
Hardinge ST-25 Swiss with LNS bar feed, 1999 model. s 1" bar capacity, 9.65" machining length, 200-6300 RPM, 7.3 HP motor, and Fanuc 18-T control. Includes chip conveyor, parts catcher, and large bushing/collet set., New spindle bearings 2022/2023., Spindle:, Collet StyleS25-HM, Bar Capacity W/ Collet1, Machining ...more
Traub #TNL26, CNC swiss type automatic screw, 1.023" hole, Fanuc TX 8i, 12' FMB Turbo 5-42 bar feeder, 2004
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Traub
Model: TNL26
Year: 2004
* Traub TX8I CNC Control, * Bar Loader with 32mm Channel Pusher, * Excellent Assortment of Tooling, Traub TNL-26, CNC Control. TX8i, Bar capacity (ms-cs). 1.023", Turning length max. 9.8", Power at 25% / 100%. 10.7/6.7 kW, Speed max. 8000 rpm, Main Spindle Axis. C-axis, Tool carriers / stations. 4 / 34, Travel X. ...more
23.625" x 23.625" x 42" Tombstone, fully drilled & tapped, (4 available)
Category: Tombstones
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Model: 23.625 X 23.625 X 42 TOMBSTONE
23.625 x 23.625 x 42" H., Base is 31.5 x 31.5, Weighs approx. 2500 lbs., Has 323 1/3-13 tapped holes on each side !, _UNKNOWN_ _UNKNOWN_.
Criterion Co. #CB3-CV50, toolholder, adj. 50 taper
Category: Tool Holders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Criterion
Model: CB3-CV50
CRITERION CB3 CV50.
Devlieg Microbore Flashchange #40FC-H1034, toolholder, 50 taper
Category: Tool Holders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
Model: 40FC-H1034
Length - 7(5/8)inch, Diameter - 3(3/4), Insert Diameter - 1(3/4)inch, Weight - 9LBS, Devlieg Microbore 40FC-H1034 Tool Holder.
Devlieg Microbore Flashchange #50FC-62, toolholder, 50 taper
Category: Tool Holders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
Model: 50FC-62
Length - 13(7/8)inch, Diameter - 3(3/4)inch, Weight - 7LBS, Devlieg Microbore Flashchange 50FC-62 Tool Holder.
Devlieg Microbore Flashchange #50M-E62, toolholder, 50 taper
Category: Tool Holders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
Model: 50M-E62
Length - 11(5/8)inch (Endmill included), Diameter - 3(3/4)inch, Insert Diameter - (5/8)inch, Weight - 5LBS, Devlieg Microbore 50M-E62 Tool Holder.
Devlieg Microbore Flashchange #MB-6028, toolholder, 50 taper
Category: Tool Holders
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
Model: MB-6028
Length - 10(1/2)inch, Diameter - 3(15/16)inch, Weight - 8LBS, Patent No. - 2.330.692, Others Pendng - 3536-1-12, Devlieg Microbore MB-6028.
T R Wigglesworth Machinery has 52 more
listings in Tool Holders.
Tooling and Accessories - Miscellaneous
19 Results
Unidrive SP are standard Allis-Chalmers input, AC output drives. The variable speed drives are easy to install and commission and can be applied in a wide range of applications.
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Allis-Chalmers
Unidrive SP, 460VAC, Max Cont Output Current (hp): Normal Duty - 43A (30hp), Heavy, Unidrive SP are standard AC input, AC output drives. Easy to Install - variable speed drives, Emerson Control Techniques Unidrive SP3401 universal AC variable speed drive. This high-performance drive delivers versatile motor control ...more
Cincinnati Milacron #Series-3-6, spline adapter sleeve for knee mill, 2.124" length, 1.25" shaft ID, .875" shaft outside dimension, 7 teeth
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cincinnati Milacron
Model: SERIES-3-6
Length.2.124", Shaft ID.1.25", Shaft OD.0.875", 7 Teeth, To repair broken mill handles., CINCINNATI MILACRON Series 3-6.
Devlieg angle plate (1), two (2) piece construction
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Devlieg
ANGLE PLATE (1) DEVLIEG, 40" TALL, 20" WIDE, TWO (2) PIECE 20" TALL, EXCELLENT, TOTAL HEIGHT. 40", OVER-ALL WIDTH. 20", BOTTOM BLOCK HEIGHT. 20", TOP BLOCK HEIGHT. 20", NUMBER OF T-SLOTS PER BLOCK. 4, CONDITION: VERY GOOD, "AS IS" SKIDDED, STRAPPED & WRAPPED.
General Electric Fanuc No. OM control console interface
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: General Electric
GE FANUC No. OM CONTROL CONSOLE INTERFACE, MPG, SCREEN, FUJITSU KEYBOARD, EXCELLENT STEEL CONSTRUCTION COUNSEL W/, KEYBOARD. FUJITSU N860-3117-T010 10A, FANUC MANUAL PULSE GENERATOR. A860-0201-T001, TOSHIBA MONITOR. E8069POA, 1E230B26, THIS UNIT IS AVAILABLE FOR INSPECTION, THE UNIT IS OFFERED "AS IS" SKIDDED ...more
Cool jet high pressure coolant system
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Jet
Year: 2005
COOLANT SYSTEM, COOL JET, FLOW RATE 8GPM, 1000 PSI / 70 BAR, 20 FOOT HOSE, NEW: 2005, MODEL: 3893, FLOW RATE. 8 GPM, MOTOR. 6 HP, HIGH VOLTAGE, 3 PHASE. 460 VAC, TOTAL CONNECTED AMPS. 14 AMPS, ELECTRICAL CABLE LENGTH. 12', INLET FITTING. 1" NPT, DISCHARGE FITTING. #12 JIC 37?, 1 STANDARD, 2ND OPTIONAL, DISCHARGE ...more
T R Wigglesworth Machinery has 14 more
listings in Tooling and Accessories - Miscellaneous.
Universal Cylindrical Grinding Machines
2 Results
12.5" x 19.7" Toyoda #GOP32X50, cylindrical grinder, 16" x 3" x 5" wheel, 5 HP, plunge, hydraulic tailstock
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Toyoda
Model: GOP32X50
Has plunge, and a hydraulic tailstock, Max swing over table. 12.59", Distance between centers. 19.7", Max. load between centers. 330Lbs., Max grinding diameter. 5.9", Wheel size. 16" x 3" x 5", Wheel drive motor. 5HP, Wheel surface speed. 6,500Sfpm, Wheelhead feed mechanism. Hydraulic type, Table traverse speed. 2-157 ...more
12.5" x 40" Toyoda #GUS32X100, universal cylindrical grinder, 1980
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Toyoda
Model: GUS32X100
Year: 1980
12.5" X 40" Capacity, Weight 6800, Dimensions 177" x 71" x 60", many grinding wheels and grinding centers. This machine is in very nice operating condition., 1980 TOYODA GUS32X100.
Vertical Boring Mills & VTL's
6 Results
52" King #52, 60" swing, 36" under rail, 40 HP, 2 swivel rams, rapid traverse, power clamp, 1955
Category: Vertical Boring Mills & VTL's
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: King
Model: 52
Year: 1955
52", KING, No. 52, 1955, MAXIMUM SWING 60", 36" UNDER RAIL, 40 H.P., UNDER POWER, NEW: 1955, TABLE DIAMETER. 52", MAX. SWING. 60", MAX. HEIGHT UNDER RAIL. 36", MAIN MOTOR. 40 HP, RAM STROKE. 30", TURRET STROKE. 30", TABLE SPEEDS (16). 4.84 - 151 RPM, THREADING. 2 - 18 TPI, FEEDS (12). 0.003 - 0.125, CROSS FEEDS. 0.010 ...more
54" Bullard #Cutmaster-54, vertical boring mill, 62" swing, 44" under rail, 4-jaw chuck, 30 HP, 4.4-160 RPM, 5-sided turret, swivel ram head, 240 V.
Category: Vertical Boring Mills & VTL's
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Bullard
Model: CUTMASTER-54
54" Bullard Cutmaster Vertical Boring Mill available. This used machine offers a 54" table diameter, 62" swing, 44" work height under rail, and is powered by a 30 HP motor. turret and RAM head swivels; ideal for diverse machining needs., 54 BULLARD VERTICAL BORING MILLMODEL: 54" CUTMASTER, S/N: 28242, CHUCK ...more
60" Webster & Bennett #60, vertical boring mill, 24" under rail, 35" under turret, 25 HP, 4.5-100 RPM, 4 jaws, (2) boring bars, 575 V., transformer
Category: Vertical Boring Mills & VTL's
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
Model: 60
WEBSTER & BENNETT 60 Vertical Boring Mill offers a 60" table, 64" swing, and 24" under rail work height. Capable of 100 RPM, it comes with 575v 3ph power and a transformer included. Ideal for robust machining needs., DIAMETER OF CHUCK. 60", MAX. SWING. 67", HEIGHT UNDER TURRET. 35", HEIGHT UNDER CROSS RAIL. 24" ...more
72" Cincinnati #Hypro, 79" sw, 72.5" 4-jaw chuck, 63" under rail, Heidenhain 2-Axis digital read out, pendant Control, variable speed, power rail elevation
Category: Vertical Boring Mills & VTL's
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Cincinnati
Model: HYPRO
Used Cincinnati Hypro 72" Vertical Boring Mill s a 72.5" chuck, 79" max swing, and 50" ram travel. 2-axis Heidenhain digital readout, 60 swiveling ram heads, pendant control, and variable speed. Made in USA, weight 65,000 lbs., MODEL. HYDRO, CHUCK DIAMETER. 72.5", MAXIMUM SWING. 79", HEIGHT UNDER RAIL. 63", VERTICAL ...more
72" Webster & Bennett #72, vertical boring mill, 84" sw, 24.5" work height, 30 HP, 1970
Category: Vertical Boring Mills & VTL's
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
Model: 72
Year: 1970
WEBSTER & BENNETT 72" Vertical Boring Mill, Model 72, 1970. s: 72" table diameter, 84" swing, 24.5" work height under rail, 30 hp power. Ideal for precision machining tasks. Used condition, Under power, DIAMETER OF CHUCK. 72", ADMITS IN DIAMETER. 76", ADMITS IN HEIGHT UNDER TURRET. 35", ADMITS IN HEIGHT UNDER ...more
T R Wigglesworth Machinery has 1 more
listing in Vertical Boring Mills & VTL's.
Vertical CNC Machining Centers
6 Results
Fadal #914-15RT, vertical machining center, 21 automatic tool changer, 20" X, 16" Y, 20" Z, 7500 RPM, #40, 7.5 HP, 16" x 29" rotary table, Fadal 88, rigid tap, 1997
Category: Vertical CNC Machining Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Fadal
Model: 914-15RT
Year: 1997
FADAL Model VMC15XT Vertical Machining Center, 1997, used. s: 20"x16"x20" travels, 7.5 hp, CAT 40 taper, 29.5"x16" table, 21 ATC, 15 HP spindle, up to 7500 RPM. CNC-88 control, RS-232 port, rigid tapping, and enclosed splash guarding included., Table Size. 29.5" x 16", Max. Table Load. 1000 Lbs, Spindle Nose to Table ...more
Fadal #VMC4020, CNC vertical machining center, 40" X, 20" Y, 20" Z, 20 HP, 10000 RPM, 21 automatic tool changer, Creative Evolution Control
Category: Vertical CNC Machining Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Fadal
Model: VMC4020
Year: 1994
Fadal 4020 Vertical Machining Center. : 40"x20"x20" XYZ travel, 20 HP, 10,000 RPM, CAT-40 taper, 21 ATC, 47.25"x19.75" table, 900 IPM rapid, 400 IPM cutting feed. Great for precision machining., X-Axis Travel. 40", Y-Axis Travel. 20", Z-Axis Travel. 20", Table Dimensions. 47.25 x 19.75, Rapid Traverse Rates. 900 IPM ...more
Fadal #VMC4020HT, vertical machining center, 21 automatic tool changer, 40" X, 20" Y, 28" Z, 10000 RPM, #40, 22.5 HP, 20" x48" tbl., rigid tap, 2005
Category: Vertical CNC Machining Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Fadal
Model: VMC4020HT
Year: 2005
10,000 RPM, Multi-Processor CNC Control (MP32), Chiller, Extended Memory (4megs), 21 Tool Changer, High torque Spindle, Model. 4020HT, Year of Manufacture. 2005, X-Axis Travel. 40", Y-Axis Travel. 20", Z-Axis Travel. 20", Table Dimensions. 47.25 x 19.75, Rapid Traverse Rates. 900 IPM, Cutting Feed Rates. 400 IPM ...more
Haas #TM-3, vertical machining center, 10 automatic tool changer, 40" X, 20" Y, 20.7" Z, 4000 RPM, #40, 7.5 HP, 14.5" x 57.75" table, Kurt vise
Category: Vertical CNC Machining Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Haas
Model: TM-3
Year: 2007
HAAS TM-3 Vertical Machining Center, 2007 model. s X/Y/Z travels of 46"/20"/16", 7.5 HP drive, 4,000 RPM spindle, CAT-40 taper, 10 ATC, 14.5"x57.75" table. Includes Kurt vise, assorted tool holders, USB slot for CNC program uploads., s:, 7.5 HP Main Drive, 4000 RPM Spindle Speed, Cat #40 Spindle Taper, USB for program ...more
Haas #VF-3, CNC vertical machining center, 40 side mount tool changer, 40" X, 20" Y, 25" Z, 12500 RPM, #40, 30 HP, 18" x48" tbl., 5-Axis trunnion table, Renishaw tool & part probe, 2016
Category: Vertical CNC Machining Centers
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Haas
Model: VF-3
Year: 2016
HAAS VF-3 Vertical Machining Center, 2016 model, used condition. 5-Axis trunnion table, 40" X, 20" Y, 25" Z travel, 30 hp, 12,500 RPM spindle, 40-tool Side Mounted Double Arm ATC, accommodating CT or BT 40 tapers, 18"x48" table, 3-axis, Renishaw Tool & Part Probe, Dual Work Lights, air nozzle, Manual Pulse ...more
T R Wigglesworth Machinery has 1 more
listing in Vertical CNC Machining Centers.
Sunnen #SV4, vertical hone, 20" max. bore diameter, 40" max. part length, 48" stroke, 32" swing, 30" x50" tbl., 3000 lb. part weight, 15 HP, 10-500 RPM variable speed
Category: Vertical Hones
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Sunnen
Model: SV4
Explore precise honing with the used SUNNEN SV4 vertical hone. s a 20 bore range, 40 max part length, and 3,000 lbs capacity. a 15 HP spindle motor, adjustable speeds, and 99 setup storage. Ideal for heavy-duty operations., Bore diameter range*.20, Maximum part length*.Approximately 3940, Full stroke*.48, Swing.32 ...more
Washer Parts - Miscellaneous
1 Result
Bowden, Liquid Turbo Charger Parts Washer System, Allen Bradley Pannel View 550
Category: Washer Parts - Miscellaneous
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Bowden
BOWDEN, LIQUID TURBO CHARGER PARTS WASHER SYSTEM, ALLEN BRADLEY PANNEL VIEW 550, BOWDEN _UNKNOWN_.
Webster & Bennett Tooling & Parts
101 Results
36" Chuck Jaws for 36" vertical turret lathe, Webster & Bennett, 8" tall, (4 available)
Category: Webster & Bennett Tooling & Parts
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
Model: 36 CHUCK JAWS FOR 36 VTL
8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER BENNETT, 3 STEP, WILL FIT 36" VTL'S, MODEL. T39.40/1, QUANTITY. 4, JAW HEIGHT (G). 8", JAW WIDTH (X). 2 1/4", STEP 1 HEIGHT (F). 3", STEP 2 HEIGHT (F1). 2 1/2", STEP 3 HEIGHT (F2). 2 1/2", OVERALL LENGTH (D). 7 3/4", 3 STEP JAWS, EXCELLENT SERRATIONS / POSSIBLEY NEVER ...more
36" V Feed Gears, Webster & Bennett
Category: Webster & Bennett Tooling & Parts
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
Model: 36 V FEED GEARS
WEBSTER & BENNETT 36" EV.
6-1/2" x 3-7/16" x 3-3/4" webster & bennett #wb-82, (Set of 4)
Category: Webster & Bennett Tooling & Parts
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
Model: 6-1/2 X 3-7/16 X 3-3/4 WEBSTER & BENNETT #WB-82
PART NO. WB 821, WIDTH (X): 3 7/16", HEIGHT (G): 3 3/4", LENGTH (D): 6 1/2", BASE HEIGHT (F): 2", FIRST STEP HEIGHT (F1) : 1 3/4", NOTE: HARDWARE AVAILABLE AT ADDITIONAL CHARGE.
8" tall chuck jaws, Webster & Bennett, 3 step, will fit 48", 60" & 72" vtl' s
Category: Webster & Bennett Tooling & Parts
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
Model: 8 TALL CHUCK JAWS
Enhance your VTL's performance with this set of four 8" tall Webster & Bennett chuck jaws, model T39.74, crafted for 48", 60", and 72" VTLs. Sold as is, crated for shipping, and in very good used condition. Total weight: 101 lbs., WEBSTER & BENNETT, Model:, T39.74/1, Condition:, Used - VERY GOOD, Stock #: ...more
8" Chuck jaws, Webster & Bennett, 3 step, 36" vertical turret lathe (4 available)
Category: Webster & Bennett Tooling & Parts
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Webster & Bennett
Model: 8CHUCK JAWS
8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER & BENNETT, 3 STEP, WILL FIT 36" VTL'S, MODEL. T39.40/1, QUANTITY. 4, JAW HEIGHT (G). 8", JAW WIDTH (X). 2 1/4", STEP 1 HEIGHT (F). 3", STEP 2 HEIGHT (F1). 2 1/2", STEP 3 HEIGHT (F2). 2 1/2", OVERALL LENGTH (D). 7 3/4", 3 STEP JAWS, EXCELLENT SERRATIONS / POSSIBLEY ...more
T R Wigglesworth Machinery has 96 more
listings in Webster & Bennett Tooling & Parts.
