CNC Exchange div. Gray Machinery Co.
Prospect Heights, IL 60070-1811
Gold Level Dealer
Surplus Record Dealer Since 1966
Contact
About
Established in 1966, CNC Exchange, a division of Gray Machinery Company has been buying and selling pre-owned machinery for over 40 years. Because half our business is buying used machinery, we identify with you the customer and fully understand your position when looking to purchase a piece of equipment.We specialize in buying and selling high-quality, pre-owned CNC Swiss-type lathes, turning centers and machining centers. We also handle many other types of industrial equipment.
Products & Services
- Automatic Screw Machines & Chuckers
- Boring Mills, Horz. & Vert.
- Brakes, Press
- CNC Machinery
- Fabricating Machinery
- Grinders
- Machining Centers, CNC
- Shears
Associations & Affiliations
121 listings in 34 categories
Edge Technologies #Patriot-338, Magazine Type Bar Loader/Feeder, 12'-5" max. bar length, 12" magazine capacity, 0.118"-1.653" bar diameter, 2 HP, 230 Volt, 3PH, 2018
Category: Bar Feeders and Loaders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Edge Technologies
Model: PATRIOT 338
Year: 2018
2018Edge Patriot 338 Magazine Bar Feeder by EDGE TECHNOLOGIES. Fixed or sliding headstock lathes, Supports 3mm-42mm bars with 12 linear inches magazine capacity. s quick-change guide channels, hydrodynamic support, and dual anti-vibration devices. Max pusher torque: 450 N., Bar diameter capacity: 3mm to 42mm (0.118 to ...more
Edge Technologies #Patriot-551, Magazine Type Bar Feeder, 12'-5" max. bar length, 0.196"-2.145" bar diameter, 1.5 KW, 230 Volt, 3PH, 2017
Category: Bar Feeders and Loaders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Edge Technologies
Model: PATRIOT 551
Year: 2017
2017 EDGE PATRIOT 551 automatic bar feeder with 35 mm guide channels. Handles bar stock from 554.5 mm and lengths up to 12 ft, with an automatic loading magazine for CNC lathes. Used., The Edge Technologies Patriot 551 automatic bar feeder, available in 6 or 12 configurations, is designed specifically for the U.S. ...more
Haas #Barfeeder-V2, Bar Feeder, 0.375"-3" bar diameter, 48" bar length capacity, 30-bar charging tray, 650 lb. max. bar weight, 2022
Category: Bar Feeders and Loaders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: BARFEEDER V2
Year: 2022
2022 HAAS BARFEEDER V2, 3.00" INSTALL KIT, Bar Capacities S.A.E METRIC, Bar Diameter Range (varies w/lathe model)0.375 in to 3.00 in 10 mm to 76 mm, Bar Length Capacity 48 in 1219 mm, Recommended Max Bar in Spindle 48 in 1219 mm, Minimum Bar Length 10 in 254 mm, Charging Tray S.A.E METRIC, Tray Capacity 30 EA x 1 in ...more
Iemca #Boss-545E, bar feeder, 3-16" to 1-5/8" barstock diameter, 125.9" barstock length, 2006
Category: Bar Feeders and Loaders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Iemca
Model: BOSS-545E
Year: 2006
2006 Iemca Boss 545 E Bar Feeder by IEMCA, Model BOSS 545. This used magazine-type bar loader supports round barstock 5mm-42mm in diameter. s feeding speed of 1770 IPM, return speed 1860 IPM, with adjustable working axis height., Barstock diameter, (ROUND)5mm - 42mm (3/16" to 1-5/8"), Feeding speed, 1770 IPM 1770 IPM ...more
Iemca #Ideal-325, Magazine Type Bar Feeder, 1/8"-1" bar diameter, 3' 3"-12' 2" bar length, 2020
Category: Bar Feeders and Loaders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Iemca
Model: IDEAL-325
Year: 2020
IEMCA IDEAL 325 MAGAZINE TYPE BAR FEEDER, NEW 2020 WAS MATED TO 20MM STAR, FEEDS LEFT TO RIGHT, 2 CHANELL SETS, Bar Diameter Capacity 3 26 mm (1/8 1), Max Bar Length 1,000 3,700 mm (33 122), Bar Weight Max 18 kg (40 lbs).
Iemca #Ideal-326, automatic sliding headstock magazine bar feeder, 1/8"-1", 12' 2" bar length, 2023
Category: Bar Feeders and Loaders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Iemca
Model: IDEAL-326
Year: 2023
IEMCA IDEAL 326 SLIDING HEADSTOCK MAGAZINE BAR FEEDER, NEW 2023, 1/8" - 1.0" 12'2" MAX BAR LENGTH, The IDEAL 326 is a automatic bar feeder for lathes with sliding headstock. Thanks to the high level of technology, there is a guarantee of precision when the bar is being selected, elevated speed of rotation, and ...more
Briquetters
1 Result
No. LT120 Puckmaster, Hydraulic Briquetter Machine w/Shread Master & Chip Conveyor, Rebuilt 2021
Category: Briquetters
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Puckmaster
Model: LT120
Year: 2021
Puckmaster LT120 Hydraulic Briquetting Press Machine with Shread Master, and Chip Conveyor, Fully Rebuilt in 2021 by Neff Press, (Cutting fluid tubs and chip hopper not included), Puckmaster LT120 Hydraulic Briquetting Press Machine with Shread Master, and Chip Conveyor, Fully Rebuilt in 2021 by Neff Press, (Cutting ...more
Carbide, Friction and Cold Saws
1 Result
FOM Industrie #BLITZ-ALVA-500A, Double-Head Mitre Saw, 3-axis, 19.7" max. cutting, 94.5" mobile head roller table, 2.9 HP, 2800 RPM, TEX CNC control, 2014
Category: Carbide, Friction and Cold Saws
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Fom
Model: BLITZ-ALVA-500A
Year: 2014
FOM BLITZ ALVA 500A DOUBLE HEAD MITRE SAW, NEW 2014, Fom Industrie Blitz Alva 500, Double Heads, 3-Axis, 19.7" Max. Cutting Capacity, 94.5" Mobile Head Roller Table, 2.9 HP Blade Motor, 3 Horizontal Vises, 2 Vertical Vises, Profile Height Measuring Device, Vertical Vises Internal Side of Blade: 2, Electronic Profile ...more
Clamps and Vises
2 Results
Haas/Kurt-Style, Precision Milling Vise, 8" jaw width, 10.5" jaw opening
Category: Clamps and Vises
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Explore the new 8" Single-Station Fixed-Jaw Vise by HAAS, offering a 10-1/2" opening and robust flange design. Precision-crafted in the USA, this tool ensures reliable clamping. Priced at $2499.95, it's a professional's choice for precision workholding., Technical, System of Measurement, Inch - ANSI, Vise ...more
Haas #HSCV-150P, Pneumatic Self-Centering Vise, 6" jaw width, 0.2" jaw stroke, riser block, 2021
Category: Clamps and Vises
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: HSCV-150P
Year: 2021
Haas HSCV-150P 6" pneumatic self-centering vise with riser block is available used. s include a 12.4" body length, 6" jaw width, and 0.2" jaw stroke. Original list price over $6,000., Technical, Vise Type, Pneumatic, Vise Holding Type, Self-Centering, Number of Stations, 1, [BL] Body Length, 12.4 in \ 315.0 mm, [BH] ...more
CNC Cylindrical Grinders
1 Result
12.9" x 25.6" Okuma #GP-26T-II, CNC Cylindrical Grinder, 12.59" X, 25.59" Z, 10 HP, 24" x 2.95" grinding wheel, 8,859 FPM, OSP-U20G control, 2016
Category: CNC Cylindrical Grinders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: GP-26T-II
Year: 2016
2016 Okuma GP26T II Cylindrical Grinder available, Okuma OSP-U20G, Marposs gage system, SBS Wheel Balancer, coolant system, and more. Max swing 12.99", distance between centers 25.6". Ideal for precise grinding tasks., Max. Swing.12.99", Distance Between Centers.25.6", Max. Workpiece Weight.110 LBS, Grinding Wheel ...more
CNC Drilling and Tapping Centers
3 Results
Fanuc #Robodrill-A-D21LiA5, 3-Axis Drilling & Tapping Center, 25.59" x 15.74" table, 27.6" X, 15.7" Y, 13" Z, 11.8" rotary table diameter, 15 HP, 10,000 RPM, Fanuc 31i-A5 CNC, 2014
Category: CNC Drilling and Tapping Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Fanuc
Model: ROBODRILL-A-D21LIA5
Year: 2014
2014 FANUC Robodrill A-D21LiA5 CNC 3-axis drill tap center available. Fanuc 31i-B5 CNC Control, 21-tool turret, and coolant system. Ideal for precision work with rapid traverse rate of 54 m/min. Large table: 25.59" x 15.74"., Large Table Size: 25.59 x 15.74, Max Table Load: 66.1 LBS, X-Axis Travel 700 mm (27.6 in) ...more
Fanuc #Robodrill-Alpha-D21SiA5, 3-Axis CNC Drill Tap Vertical Machining Center, 11.81" X, 15.75" Y, 12.99" Z, 24000 RPM, 21-turret, Fanuc 31i, 2013
Category: CNC Drilling and Tapping Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Fanuc
Model: ROBODRILL-ALPHA-D21SIA5
Year: 2013
FANUC ROBODRILL A-D21SiB5 3-AXIS CNC DRILL TAP VERTICAL MACHINING CENTER, NEW 2013, 21 position turret, 24,000 rpm spindle, coolant system, Fanuc 31i CNC Control, Standard s, Axis Travel of 300mm (X Axis), 400mm (Y Axis),330mm (Z, 630mm x 330mm Table Area With A 200 kg Load Capacity, 200-24,000 RPM Direct Drive High ...more
Haas #DC-1, CNC Drilling & Tapping Center, 23.6" X, 17.7" Y, 13" Z, 27.6" x 16.5" table, 15 HP, 10,000 RPM, 21-station turret, 2024
Category: CNC Drilling and Tapping Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: DC-1
Year: 2024
2024 HAAS DC-1 CNC Drill Tap Center, NEW 2024 15 HP 10,000 RPM 30 TAPER 21 POSITION TURRET, COOLANT THRU READY, The DC-1 is a traditional-style drill/tap machine with a 10,000-rpm BT30 spindle and high-speed turret-style tool changer to minimize cut-to-cut times and shorten cycle times. Choose the optional 15,000-rpm ...more
Bodor #i7, CNC laser cutter, 3000 watt, dust collector, 2023
Category: CNC Lasers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Bodor
Model: I7
Year: 2023
BODOR i7 CNC LASER CUTTER, 3KW, NEW 2023 DUST COLLECTOR, Intelligent Function, i7, Time Savings Remnant Typesetting, High speed cutting expert database, Bodor lightning perforation technology, Automatic adjustment of cutting gas pressure, O2, Laser cutting technology expert database, Touchscreen Display, Auto-focus of ...more
DMC #DL-55L, CNC turning center lathe, 2-Axis Fanuc 0iTD, 30.5" swing, 3-jaw 21" chuck, 2015
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Dmc
Model: DL-55L
Year: 2015
24" x 89" DMC MODEL DL 55L CNC TURNING CENTER LATHE, NEW 2015, 21" 3-JAW CHUCK, 6.5" SPINDLE BORE, 50 HP, 1700RPM, 12 POSITION TURRET, FANUC Oi-TD CNC CONTROL, Chuck Size 21", Bar Capacity 6.38", # Axis 2, Power 50 hp, Max RPM 1,700 RPM, Turning Dia 24.8", Swing 30.5", Machining Length 89.17", Tailstock Yes, Weight ...more
Daewoo Doosan #Lynx-220LC, CNC Turning Center, 6.89" X, 21.65" Z, 20" swing, 12.6" max. cutting diameter, 20.7" machining length, 8" chuck, 20 HP, 4000 RPM, 12-station turret, 2015
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Doosan
Model: LYNX-220LC
Year: 2015
Doosan Lynx 220LC CNC Turning Center Lathe, used 2015 model, s 8" main spindle chuck, 20.08" max swing, 12.6" cutting diameter, and 12 tool stations. Fanuc i CNC Control, tool presetter, parts catcher, and more. Dimensions: 90"x72"x66"., Main Spindle Chuck 8", Maximum Swing 20.08, Maximum Cutting Diameter 12.6" ...more
Gildemeister #Sprint-42-Linear, 5-Axis CNC Lathe, twin spindle, 1-5/8" bar capacity, 4-3/4" max. turning diameter, 6500 RPM, Fanuc 160i CNC, 2010
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Gildemeister
Model: SPRINT-42-LINEAR
Year: 2010
2010 DMG Gildemeister Sprint 42 Linear CNC Lathe, 5-axis, used. s 2 spindles, max bar diameter 42 mm, Fanuc 160i CNC, and high-pressure coolant. chip conveyor and Iemca Prodigy 552-HD Bar Feeder. Perfect for precision machining., - Number of spindles : 2, - Number of axes : 2, MAIN SPINDLE, - Spindle speeds : 6500 ...more
Haas #SL-20T, 2-Axis CNC Lathe, 20" max. turning length, 10.3" max. turning diameter, 8.45" X, 20" Z, 23" swing over bed, 8" chuck, 20 HP, 4000 RPM, 10-station turret, 1999
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: SL-20T
Year: 1999
HAAS SL-20T CNC 2-AXIS LATHE, NEW 1999 NICE MACHINE, 8" 3-JAW CHUCK, 10 STATION TURRET WITH TOOLS, TAILSTOCK, TOOL SETTER, CHIP CONVEYOR, HAAS CNC, Control:: Haas CNC, Max Turning Diameter:: 10.3", Max Turning Length:: 20", Spindle Speeds:: 4,000 Max RPM, Spindle Drive:: 20 HP Vector, Spindle Nose:: A2-6, Hole Thru ...more
Haas #ST-10Y, CNC 4" Axis Turning Center, 7.88" X, 2" Y, 14" Z, 12" max. cutting diameter, 14" max. cutting length, 16.25" socs, 6" chuck, 15 HP, 6000 RPM, 24-station turret, 2016
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: ST-10Y
Year: 2016
HAAS ST-10Y CNC 4-AXIS TURNING CENTER WITH MILLING & Y-AXIS, 6,000 rpm live tooling, 24 pos turret, tailstock, tool setter, parts catcher, chip conveyor, Haas cnc, New 2016, Swing Diameter:, Over front apron 25.25", Over cross slide 16.25", Over tailstock 23.5", Capacities:, Chuck size 6.5", Max. Cutting diameter ...more
Haas #ST-20SSY, CNC Turning Center, 9.3" X, 2" Y, 21" Z, 21" max. cutting length, 10" max. cutting diameter, 20.75" socs, 8" chuck, 30 HP, 4000 RPM, 24-station turret, 2016
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: ST-20SSY
Year: 2016
HAAS ST20SSY CNC TURNING CENTER WITH LIVE TOOLING AND Y-AXIS NEW 2016, C-Axis, Y-Axis, 24 pos live turret, 6000 rpm live tools, tool setter, parts catcher, chip conveyor, Haas CNC, Model: Haas ST-20SSY, Year: 2016, Swing over front apron: 31.75, Swing over cross slide: 20.75, Max. cutting dia: 10", Max. cutting ...more
Hwacheon #T2-1T-SMC, Multi-Axis CNC Lathe, 18" turning diameter, 24.5" center distance, 8" chuck, Fanuc 0i-TD, 12-turret, live tooling, 2013
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Hwacheon
Model: T2-1T-SMC
Year: 2013
HWACHEON MODEL T2-1T SMC MULTI AXIS CNC LATHE TURNING CENTER, NEW 2013, MAIN AND SUB SPINDLES, C-AXIS, 12 POSITION TURRET WITH LIVE TOOLING, PARTS CATCHER, FANUC Oi-TD CNC, Bar Capacity 2.56, C Axis Index 0.001, Center Distance 24.5, Chuck Size Dual 8, Control Fanuc 0i-TD, Live Tooling Speed 6000, Machine Dimensions ...more
Hyundai Kia #SKT21LMS, CNC turning center, 21.7" swing, 2.5" bar, live tooling, sub spindle, 4,000 RPM, 15 HP, 2010
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Hyundai Kia
Model: SKT21LMS
Year: 2010
2010 Hyundai Kia SKT21LMS CNC Lathe, s live tooling and sub spindle. Swing: 21.6", Machining Length: 20.9", 15 hp, Max RPM: 4,000. chucks, live tool turret, tool presetter, part catcher, and chip conveyor. Used condition., CAPACITY: SWING OVER BED / SWING OVER SADDLE 21.7" / 13.8", MAXIMUM TURNING DIAMETER / LENGTH ...more
Hyundai Wia #L2100SY, CNC Turning Center, 8.26" X, 3.93" Y, 22.83" Z, 24.8" swing, 13.18" turning diameter, 17.91" turning length, 20 HP, 4500 RPM, Fanuc 32iB CNC, 2015
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Hyundai Wia
Model: L2100SY
Year: 2015
HYUNDAI WIA L2100SY CNC Turning Center Lathe, main and sub spindle, C-Axis, Y-axis, 12 position turret, live tooling, Bar feeder, Fanuc CNC Control, Product, Maximum Swing 24.8", Maximum Turning Diameter 13.18", Maximum Turning Length 17.91", Bar Capacity 2.6", Spindle Speed 4,500 RPM, Spindle Motor 20 HP, Sub Spindle ...more
Hyundai Wia #LV450RM, 3-Axis CNC Vertical Lathe, 12.2" X, 19.5" Z, 24.4" swing diameter, 18.3" turning height, 12" chuck, 29.5 HP, 3000 RPM, Fanuc 32i-B CNC, 2014
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Hyundai Wia
Model: LV450RM
Year: 2014
2014 HYUNDAI WIA LV450RM CNC 3-AXIS VERTICAL LATHE, LIVE MILLING, C-AXIS, 15" CHUCK, Control System: Fanuc 32i-B (standard), Turret: Servo turret with 3-piece couplings for indexing accuracy, Coolant System: 290 PSI, rear hinged chip conveyor (42" discharge height), Bed: Massive Meehanite cast iron with step frame ...more
Mazak #Integrex-300-IV-S, 5-Axis CNC Mill, 24.8" X, 9" Y, 62.4" Z, 60" max. machining length, 30" max. diameter, 10" chuck, 40 HP, 4000 RPM, Mazatrol Matrix CNC, 2006
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mazak
Model: INTEGREX 300 IV S
Year: 2006
MAZAK INTEGREX 300-IVS 5-AXIS CNC MILL/TURN CENTER, Mazatrol Matrix CNC Control, 4,000 RPM Main & Sub-Spindle. 12,000 RPM Milling Spindle B-Axis, Renishaw Probe & 10" Chuck, Chip Conveyor & Coolant System, Parts Catcher & Tools Measurement, Capacity, Bar Capacity 3", Max. Machining Dia. 30.000", Max. ...more
Miyano #ABX-64SY, CNC Multi-Axis Turning Center, 2.52" work diameter, 4.65" work length, 7.48" X, 1.57" Y, 21.65" Z, 6" chuck, 20 HP, 5000 RPM, Fanuc 31i-A control, 2011
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Miyano
Model: ABX-64SY
Year: 2011
MIYANO ABX-64SY MULTI AXIS CNC TURNING CENTER NEW 2011, twin spindle, twin turrets, 64MM capacity, y Axis, Machining Capacities, Main spindle bar capacity: 64 mm, Sub-spindle bar capacity: 52 mm, Max cutting diameter: 165 mm, Main spindle speed: 40 ~ 4,000 rpm, Sub-spindle speed: 50 ~ 5,000 rpm, Turret and Live ...more
Miyano #LZ-02, 2" Axis turning center w/auto load/unload system, Fanuc 21T, 15 HP, 1998
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Miyano
Model: LZ-02
Year: 1998
MIYANO LZ-02 CNC Lathe, 2-axis, 1998 model, s Fanuc 21T control, auto load/unload, and a 3-jaw chuck. With 10 tool positions (5 live), it handles max diameter of 4.724", machining length 3.14". Powered by a 15 HP motor, 208/220/230V., Max. Cutting Diameter 4.724", Max. Machining Length w/ Loader 3.14", Spindle Bore ...more
Mori Seiki #CL-2000B, CNC lathe, 8" chuck, chip conveyor, coolant system, Fanuc M-10iA robot loader, MSX-850III CNC, 2006
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: CL-2000B
Year: 2006
2006 Mori Seiki CL2000B CNC Lathe with MSX-850III Control, FANUC M-10 iA Loader, 8" Chuck, Chip Conveyor, Coolant System, Tool Holders. Low hours. Ideal for efficient automation.
Mori Seiki #NL-2500Y/700, CNC lathe Turning Center, 10.2" X, 3.9" Y, 31.3" Z, 14.5" max. turning diameter, 27.55" max. turning length, 36.4" swing, 25 HP, 4000 RPM, MSX-850 lll, 2008, (2 available)
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: NL-2500Y/700
Year: 2008
Mori Seiki NL2500Y/700 CNC Lathe Turning Center with Live Tooling and Y-Axis, Live tooling, Coolant, Chip Conveyor, MORI SEIKI NL2500Y/700, Control: MSX-850 lll, Built: 2008, Capacity, Max Turning Diameter: 14.5, Max Turning Length: 27.55, Max Bar Capacity: 3.1, Swing Over Bed: 36.4, Distance Between Centers: 34.6 ...more
Mori Seiki #NL-2500Y700, CNC lathe Turning Center with Live Tooling and Y-Axis
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: NL-2500Y700
Year: 2008
Mori Seiki NL2500Y/700 CNC Lathe Turning Center with Live Tooling and Y-Axis, Live tooling, Coolant, Chip Conveyor, MORI SEIKI NL2500Y/700, Control: MSX-850 lll, Built: 2008, Capacity, Max Turning Diameter: 14.5, Max Turning Length: 27.55, Max Bar Capacity: 3.1, Swing Over Bed: 36.4, Distance Between Centers: 34.6 ...more
Nakamura -Tome #WT-300MMY, Twin Spindle Twin Turret CNC Lathe, 7.68" X, 30.71" Z, 10.63" turning diameter, 30.71" turning length, 4500 RPM, 20/15 HP, NT Smart X control, 2015
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Nakamura-Tome
Model: WT-300MMY
Year: 2015
Purchase a reliable, used NAKAMURA-TOME WT-300. Made in 2015, this CNC Lathe is a high-pressure coolant pump, parts catcher and exit conveyor, a bar feeder, mist collector, and milling function on both turrets. The machine is 24 tool stations upper and lower each, spindles speeds up to 4,500 RPM, and a machine weight ...more
Okuma #Crown-769, 2" Axis CNC Turning Center, 9.1" X, 50" Z, 24.4" swing, 49.21" machining length, 14.17" turning diameter, 12" chuck, 30 HP, 3500 RPM, OSP-U100L CNC, 2000
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: CROWN 769
Year: 2000
Used 2000 OKUMA CROWN 769 CNC Turning Center with 15" Chuck. s include OSP-U100L CNC control, programmable tailstock, and chip conveyor. : 2-axis, 30 hp, 3,500 RPM, 24.41" swing, 49.21" machining length. Dimensions: 140" x 76" x 80"., SWING 24.41", MACHINING LENGTH 49.21", # AXIS 2, X TRAVEL 9.1", Z TRAVEL 50.01" ...more
Okuma #Genos-L400E, CNC Turning Center & Lathe, 8.66" X, 45.03" Z, 20.4" swing, 15.35" turning diameter, 10" chuck, 20 HP, 3000 RPM, OSP-P200L-R control, 2012
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: GENOS L400E
Year: 2012
2012 OKUMA GENOS L400E 2-axis CNC lathe with OSP-P200L-R control, 20.47" swing, and 15.35" turning diameter. a 10" chuck, tool setter, chip conveyor, turret tool holders, tailstock, and coolant system, and One Touch IGF. Ideal for precision tasks., OKUMA GENOS L400 CNC 2-AXIS TURNING CENTER LATHE, OSP-P200L-R Control ...more
Quick-Tech #T8-Hybrid, 9-Axis CNC lathe, 19.7" swing, 20" between centers, 13.8" max. turning length, 11.8" max. turning diameter, 8" chuck, 15 HP, 4000 RPM, 2022
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Quick-Tech
Model: T8-HYBRID
Year: 2022
QUICKTECH T8 Hybrid CNC Lathe, 2022 model, s 9-axis with twin-spindle, 4000 RPM spindle speeds, and max turning diameter of 11.8". collet chucks, live toolholders, and Fanuc CNC control for precise machining., Machine Type 9-Axis Twin-Spindle CNC Mill/Turn Center, CNC Control Fanuc 0i-TF (typical North American ...more
Southwestern Industries #Trak-2460SX, 2-Axis CNC lathe, 24" swing, 60" centers, 12" chuck, 1800 RPM, ProtoTrak SLX Control, 2011
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Southwestern Industries
Model: TRAK-2460SX
Year: 2011
Southwestern Industries Trak 2460SX 2-Axis CNC Lathe, used. s 24" swing over bed, 60" max distance between centers, and spindle speeds up to 1800 RPM. Proto Trak SLX controller, 12" chuck, and coolant system., HEIGHT OF CENTERS. 12", SWING OVER BED. 24", SWING OVER CROSS SLIDE. 14.5", MAX DISTANCE BETWEEN CENTERS. ...more
Tsugami #TMA8F, 6" Axis CNC Milling & Turning Center, 8.66" max. diameter, 22.83" max. length, 2.5" bar stock, 20 HP, 5000 RPM, 60 ATC, Fanuc 31i-B5, 2022
Category: CNC Lathes and Turning Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Tsugami
Model: TMA8F
Year: 2022
Boost your shop's efficiency with the 2022 Tsugami TMA8F 6-Axis CNC Milling and Turning Center. Perfect for complex machining with full 5-axis capability, 60 CAPTO C4 tools, and FANUC 31i-B5 control. Maximize precision with high rigidity and glass scales., Maximum Bar Stock 65 mm, 2.56, Maximum Work Diameter 220 ...more
RAS #Multibend-Center-79.26-2, CNC Panel Bender, 100.8" working length, 10.4.7" max. blank length x 59.1" max. blank width, 0.08" max. thickness, KUKA loading robot, 2013
Category: CNC Panel Benders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Ras
Model: MULTIBEND CENTER 79.26
Year: 2013
2013 RAS MULTIBEND CENTER 79.26,2 WITH KUKA LOADING ROBOT, Automatic loading and unloading, Automatic blank squaring, Automatic folding sequences, highest level of productivity, Automatic tool setup, Highest level of precision and repeatability, Scratch free bending, no wear of tools, One-click part programming, Small ...more
CNC Plasma Cutting Systems (Flame Cutters)
1 Result
Baileigh #PT-105-HD, CNC Plasma Cutter, 5' x 10' table, 120 amp, 5/8" production cut, 220 Volt, 1PH, 2023
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Baileigh
Model: PT-105 HD
Year: 2023
2023 Brand New Unused BAILEIGH PT-105 HD CNC Plasma Cutter, 5' x 10' Table, 120 amp plasma power supply, Baileigh 5' x 10' CNC Plasma Cutting Table PT-105HD-V2 1231495A, Our PT-105HD-V2 is the next generation of our plasma tables, it has the structural strength to handle 5' x 10' sheets. ...more
Andi #Stratos-SUP, CNC Router, 5' x 10' table, drill bank, vacuum pump, HSD router spindle, Fanuc CNC, 2001
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Andi
Model: STRATOS-SUP
Year: 2001
2001 ANDI STRATOS SUP 5' x 10' CNC Router, Drill Bank, vacuum pump, Fanuc CNC Control, HSD Router spindle, Working Area (X×Y×Z), 60" × 120" (5×10 ft) standard; 60" × 144" (5×12 ft) extended, Spindle Power, 1218 HP (913.4 kW), Max Spindle Speed, 24,000 RPM, Feed Rate, Up to ...more
Komo #VR510, Mach One 3-Axis CNC router, Fanuc controls, router spindle, drill bank, tool changer, 1996
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Komo
Model: VR510
Year: 1996
KOMO VR510 MACH ONE 3-AXIS CNC ROUTER, FANUC CNC CONTROLS, ROUTER SPINDLE, DRILL BANK, TOOL CHANGER, Komo VR510 Mach One 3-axis cnc Router, 5 X 10 High Speed CNC router with the GE Fanuc 210i with integrated PC Control System, HSK 63F four-pole spindle, 15 HP drive 24K RPM, Vacuum Table, 10 Position Bi-Directional ...more
Komo #VR510, Mach One 3-Axis CNC Router, 134" X, 84" Y, 8" Z, 120" x 60" table, 10-station tool changer, 11.39 HP, 17,600 RPM, Fanuc control, 2003
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Komo
Model: VR510
Year: 2003
KOMO VR510 3-Axis CNC Router from 2003 in used condition. s a 11.39 HP spindle reaching 17,600 RPM, a 10-tool changer, high-velocity air blast, drill bank, and GE Fanuc control. Table size: 120 x 60, axis travels: 134 x 84 x 8., Komo VR510 Mach One 3-axis cnc Router, Axis Travels: 134 X 84 X 8, Spindle Mfg, Komo Mdl. ...more
MultiCam #5000-Series, CNC Router, 5' x 20' table, 12-station tool changer, 10 HP, 24,000 RPM Columbo spindle, drill bank, 4-zone vacuum table, 2004
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Multicam
Model: 5000 SERIES
Year: 2004
5' X 20' MULTICAM 5000 SERIES CNC ROUTER, NEW 2004, 10 HP 24,000 RPM COLUMBO SPINDLE, 12 POS ROTARY TOOL CHANGER, 4 ZONE VACUUM TABLE, DRILL BANK, MULTICAM, Model: 5000 SERIES, Year: 2004, High-Speed CNC Router, Moving Gantry System, Usage: Plastics, Metals, Woods, OEM: MultiCam (Dallas, TX), Model: 5000 ...more
MultiCam #5000-Series, CNC Router, 5' x 20' table, 12-station tool changer, 10 HP, 24,000 RPM, 4-zone vacuum table, 380 VAC, 3PH, 2010
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Multicam
Model: 5000 SERIES
Year: 2010
5' X 20' MULTICAM 5000 SERIES CNC ROUTER, NEW 2010, 10 HP 24,000 RPM EURO SPINDLE, 12 POS ROTARY TOOL CHANGER, 4 ZONE VACUUM TABLE, MULTICAM, Model: 5000 SERIES, Year: 2010, High-Speed CNC Router, Moving Gantry System, Usage: Plastics, Metals, Woods, OEM: MultiCam (Dallas, TX), Model: 5000 Series Router, DOM: ...more
SCM #Accord-FX-M, 3-Axis CNC router, 16 position tool changer, vacuum pump, 2013
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Scm
Model: ACCORD-FX-M
Year: 2013
2013 SCM Accord 30 FX-M 3-Axis CNC Router for sale. This used machinery offers flexibility with a multifunction aluminum worktable. s pendulum machining, energy-saving tech, and a 16-position tool changer for enhanced production efficiency., Machining centre the high-performance SCM multifunction worktable in ...more
Streamline Automation #FrogMill-3D, 4-Axis CNC Router, 124" x 64" vacuum table, 26" Z stroke, 16" under gantry, 5.5 HP, 17,000 RPM, 220 Volt, 3PH, 2014
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Streamline Automation
Model: FROGMILL 3D
Year: 2014
Streamline Automation Frog 3D SFM72 x 120 4-Axis CNC Router, S/N SFM2104-110 (New 2014), with 124" x 64" Vacuum Table, 17,000-RPM Spindle, 5.5-HP, 26" Z-Axis Stroke, 16" Under Gantry, 26 Z-AXIS STROKE, Under Table-Mounted Trunnion Table, Foam Carving Capabilities up to 4' Dia. x 8' Length, Rack & Pinion ...more
Thermwood #C42, 3-Axis CNC router with 5' x 10' table, 24000 RPM, 2000
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Thermwood
Model: C42
Year: 2000
THERMWOOD MODEL C42 3-AXIS CNC ROUTER WITH 5' X 10' TABLE, Moving table, Fixed gantry, Table size: 5'x10', Travels:, X-Axis 60", Y-Axis 120", Z-Axis 6", Feed rates:, X-Axis 0 - 1500 IPM, Y-Axis 0 - 1500 IPM, Z-Axis 0 - 1500 IPM, Power: 3 Phase, 60 Cycle, 440 volt, Router HP 10 1/2 HSD 919, Router speed ...more
Thermwood #C53, 3-Axis CNC Router, 60" x 144" table, 60" X, 144" Y, 6" Z, 3/4" router bit shank, 10 HP, 15,000 RPM, QCore CNC, 220/440 Volt, 3PH, 2004
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Thermwood
Model: C53
Year: 2004
THERMWOOD MODEL C53 3-AXIS CNC ROUTER WITH QCORE CNC UPGRADE, VACUUM PUMP, Moving gantry fixed table style, Table size 60" x 144", Travels, X axis 60", Y axis 144", Z axis 6", Feed rates, X axis 0-900 I.P.M., Y axis 0-900 I.P.M., X axis 0-900 I.P.M., Power 3 Phase, 60 cycle, 440 volt or 220 volt, Router H.P. 10 ...more
Thermwood #C67DT, 5-Axis CNC Router, 122" X, 60" Y, 36" Z, 5' x 10' table, 7.5 HP, 18,000 RPM, QCORE CNC, 220/440 Volt, 3PH, 1999
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Thermwood
Model: C67DT
Year: 1999
THERMWOOD MODEL C67DT 5 AXIS CNC ROUTER, (2) 5' x 10' tables, 36" Z, Perske dual head spindle, UPGRADED TO QCORE CNC CONTROL, *MOVING TABLE STYLE MACHINE*, Table 2 5' x 10', Axis X 122", Axis Y 60", Axis Z 36", Axis 4 Rotation 360 Degrees Rotation, Axis 5 Tilt 180 Degree tilt, Feed speeds 0 to 900 IPM ...more
Thermwood #CS43-510, 3-Axis CNC Router, 121.5" X, 76" Y, 9.8" Z, 5' x 10' table, 12 HP, 24,000 RPM, 11-position ATC, Ultra 6 CNC, 2021
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Thermwood
Model: CS43-510
Year: 2021
2021 Thermwood CS43-510 CNC router, 5'x10' bed. s include ULTRA 6 control, 11-position tool changer, vacuum pump, tool length measurement, pop-up locator pins. Rapid traverse rate of 2800 ipm, a 12 HP spindle and automatic lubrication., Rapid traverse rate 2800 ipm, x axis travel 121.5", y axis travel 76", z ...more
Thermwood #CS45, 3-Axis CNC router, Q-Core CNC, 5' x 12', 10.5 HP, 24000 RPM, 2006
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Thermwood
Model: CS45
Year: 2006
5'X12' THERMWOOD MODEL CS45 3-AXIS CNC ROUTER, Q-Core CNC upgrad, windows 7 software, 7 position tool changer, 10.5 HP 24,000 rpm spindle, tool length measure, 5'x12' Moving Gantry with a machined aluminum Table, Single-zone acrylic vacuum plenum, and manual Pop-up Pins, s:, 144" X, 74.2" Y, 9.8" Z ...more
Thermwood #CS45, 3-Axis CNC Router, 5' x 10' moving gantry w/machined aluminum table, 10 HP HSD Spindle, 24,000 RPM, 18 HP Busch vacuum pumps, 7-position tool changer, Gen II CNC, 2006
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Thermwood
Model: CS45
Year: 2006
5'X10' THERMWOOD MODEL CS45 3-AXIS CNC ROUTER, Gen II CNC Control, 7 position tool changer, 10 HP HSD Spindle, Tool length Measurement, vacuum pump New 2006, 5'x10' Moving Gantry with a machined aluminum Table, Single-zone acrylic vacuum plenum, s:, High Performance closed loop AC Servo motors driving ...more
Thermwood #Cut-Ready-Cut-Center, CNC Router, 5' x 10' table, Ultra 6 CNC, vacuum pump, 2021
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Thermwood
Model: CUT READY CUT CENTER
Year: 2021
5' X 10' Thermwood Cut Ready Cut Center CNC Router designed for Cabinets, New 2021 Ultra 6 CNC, Vacuum pump, Extra easy programming, MACHINE, Maximum sheet size 61" X 121", Electrical requirements 380 440 Volt 50 Hz / 440-480V 60Hz 3 Phase power input (other voltages optional). NOTE: A grounding rod with a ...more
Weeke #Optimat-BHX-500, CNC router processing center, top & bottom processing, dual routers & drill banks, 2011
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Weeke
Model: OPTIMAT-BHX-500
Year: 2011
WEEKE OPTIMAT BHX-500 CNC ROUTER PROCESSING CENTER, NEW 2011, TOP AND BOTTOM PROCESSING, DUAL ROUTERS AND DRILL BANKS, Manufacturer Weeke, Model Optimat BHX 500, Year 2014, Condition Used, * Model Optimat BHX 500, * Minimum Length 200 mm, * Maximum Length 2500 mm, * Minimum Width 70 mm, * Drilling depth 38 mm max, * ...more
Weeke #Optimat-NBP084/Vantech 480, scizor table, outfeed, router, drill bank 4 x 8 table, 2016
Category: CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Weeke
Model: OPTIMAT-NBP084/VANTECH
Year: 2016
Weeke OPTIMAT NBP084/VANTECH480, NEW 2016, SCIZOR TABLE, OUTFEED, ROUTER, DRILL BANK 4 X 8 TABLE, Table Width, 48", Table Length, 96", Number of Axis, 3, Z-Axis Travel, 9.6", Spindle Mfg, HSD, Spindle Motor, 12 HP, Tool Changer, 7 Positions, Boring Block, (7) Spindle Drill Bank, Control, Stand Alone Weeke Control ...more
CNC Vertical Boring Mills – including VTLs
5 Results
19.5" Daewoo Doosan #V400M, 3-Axis CNC vertical lathe with live tooling, single turret, 12" chuck, 2012
Category: CNC Vertical Boring Mills – includin...
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Daewoo Doosan
Model: V400M
Year: 2012
Doosan V400M 3-Axis CNC Vertical Lathe with live tooling, 2012 model. s Fanuc I Series CNC control, turret with live tooling, 5 tool holders, coolant system, chip conveyor, 18" chuck. Ideal for precision machining needs., Doosan Puma V400M Single Turret Vertical Lathe, Technical for Puma V400M, Technical, Chuck size ...more
24" Daewoo Doosan #Puma-V550, CNC Vertical Turning Center, 15.3" X, 30.7" Z, 31.5" swing, 28.74" turning diameter, 29.5" turning length, 50 HP, 2000 RPM, Fanuc 21i-TB CNC, 2007
Category: CNC Vertical Boring Mills – includin...
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Doosan
Model: PUMA V550
Year: 2007
2007 DOOSAN PUMA V550 CNC 21" CHUCK VERTICAL LATHE, 50 HP, 2000 RPM, 31.5" SWING COOLANT AND CHIP CONVEYOR, The Doosan PUMA V550 is a robust CNC lathe engineered for heavy-duty turning and high-production shops. Combining rigid construction with modern control s, the PUMA V550 delivers consistent accuracy, efficient ...more
28.7" Daewoo Doosan #Puma-V550, CNC Vertical Turning Center, 31.5" swing, 24" chuck, 15.3" X, 30.7" Z, 50 HP, 2000 RPM, Fanuc 21i-TB CNC, 2007
Category: CNC Vertical Boring Mills – includin...
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Doosan
Model: PUMA-V550
Year: 2007
2007 DOOSAN PUMA V550 CNC 21" CHUCK VERTICAL LATHE, 50 HP, 2000 RPM, 31.5" SWING COOLANT AND CHIP CONVEYOR, The Doosan PUMA V550 is a robust CNC lathe engineered for heavy-duty turning and high-production shops. Combining rigid construction with modern control s, the PUMA V550 delivers consistent accuracy, efficient ...more
Froriep #KE-16-Super, 4-Axis CNC vertical boring mill w/ram & turret head, Fanuc 18TT, 71" swg, 63" chk, 2006
Category: CNC Vertical Boring Mills – includin...
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Froriep
Model: KE-16-SUPER
Year: 2006
63" Froriep 4-Axis CNC Vertical Boring Mill w/ Ram and Turret Head, 63" Table, face plate type chuck, 71" swing, Fanuc 18TT CNC, 50 HP Drive, Retrofit 2006, 63"x71" Froriep Model KE-Super KE16 63" Turret Lathe, 4-AXis CNC Retrofit 2006, Diameter of Chuck: 63" (1,600.2 mm), Max Swing: 71" (1,803.4 mm), Height Under ...more
Hyundai #HIT-V5R, CNC vertical turning center, 15" chuck, 31.5" swing, 21.65" turn diameter, 2,000 RPM, 30 HP, Fanuc O-T, 2000
Category: CNC Vertical Boring Mills – includin...
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Hyundai
Model: HIT-V5R
Year: 2000
15" Hyundia HIT-V5R CNC Vertical Turning Center, 15" 3-jaw chuck, 2000 rpm, 30 HP, 31.5" max swing, Fanuc O-T CNC, HYUNDAI HIT-V5R VERTICAL CNC TURNING CENTER, NEW 2000, MAX. TURNING DIAMETER: 21.65", MAX. TURNING LENGTH: 23.6", MAX. SWING: 31.5", CHUCK DIAMETER: 15", TRAVEL - X AXIS: 12.8", Travel- Y AXIS: 24.6" ...more
Coordinate Measuring Machines (CMM)
1 Result
OGP #SmartScope-Flash-302-DCC, DCC Non-Contact Coordinate Measuring Machine, 11-13/16" X/Y, 9-13/16" Z, Zone3 software, 2024
Category: Coordinate Measuring Machines (CMM)
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Ogp
Model: SMARTSCOPE FLASH 302 DCC
Year: 2024
2024 OGP SMARTSCOPE FLASH 302 DCC NON CONTACT PRECISION MEASURING MACHINE, NEW 2024, ZONE3 Metrology Software, SP25 Scanning Probe Kit,3-Station Change Rack.LIKE NEW, SmartScope Flash 302 -, VERSATILE ALL-IN-ONE 3D, MULTISENSOR MEASUREMENT SYSTEM, BUILT TO HANDLE A WIDE VARIETY OF, MEASUREMENT TASKS, SmartScope Flash ...more
1/2" to 3-1/8" Oliver #700, automatic drill point grinder, 9" x 2" x 5" cup type grinding wheel, 2 HP, 1998
Category: Drill Grinders
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Oliver
Model: 700
Year: 1998
OLIVER MODEL 700 AUTOMATIC DRILL POINT GRINDER, The Model 700 Automatic Drill Point Grinder combines the excellent s of the Oliver 600 drill point grinder and adds a pushbutton control, making the machine totally automatic. The Model 700 can produce the popular double angle point which consists of automatic ...more
Dust Collectors
2 Results
17600 cfm Donaldson Torit #ADMC-AD8 Dryflo 8 cartridge dust collector
Category: Dust Collectors
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Donaldson
Model: ADMC-AD8
17,600 CFM Donaldson Torit Model ADMC-AD8 Dryflo 8 Cartridge Dust Collector, 40 Hp Blower motor.
24000 cfm Aget #FH58S-6D-SP, dust collection system, 11 gauge steel panel construction, 14" inlets w/ companion rings, 100 HP TEFC blower motor, 1800 RPM, 230/460 Volt, 2017
Category: Dust Collectors
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Aget
Model: FH58S-6D-SP
Year: 2017
24,000 CFM Aget Model FH58S-6D-SP DUSTKOP Dust collection system, 100 HP blower New 2017, Model FH58S-6D-SP DUSTKOP FILTERKOP, Includes: Two Motor Shakers, 3/4 HP 230/460-3-60-1800 TEFC C-face, motor, FH58 Beane Bag Polyester Filter Tubes, Filter Upgrade Charge from Standard, Material, Special 11 GA Construction of ...more
20" x 60" Mori Seiki #MR-1500G, toolroom lathe, 4-jaw 18" chuck, steady & follow rest
Category: Engine Lathes
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: MR-1500G
20" X 60" MORI SEIKI MR-1500G TOOLROOM ENGINE LATHE, 18" 4-JAW CHUCK, Swing over bed. 20", Swing over cross slide. 11", Swing in gap. 26", C to C. 59", Spindle nose. D6, Spindle bore 2", Spindle motor 10hp 3 phase, Spindle speed range. 28 - 1350rpm, Tailstock #5 Morse taper Steady & follower rest, Carriage stop ...more
Finishing Machines
1 Result
Makor #S-ONE-M, Automatic Reciprocating Spray Finishing System, 145-5/8" x 43-1/4" working area, 96" x 48" x 1" carrier tray, 4 spray guns, 2 coating circuits, 2013
Category: Finishing Machines
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Makor
Model: S-ONE-M
Year: 2013
Machine suitable for those companies that need to spray small batches with water based or solvent based paints, or glue for veneered components, or PVC. Also for those companies that for the first time, step into the automatic painting process., The START-ONE can be used for automatic spraying of all types of paint ...more
Gap Frame Single Crank Press Machines
1 Result
165 Ton, Komatsu #OBS-150-5, 9.8" stroke, 17.7" Shut Height, air clutch, 49" x30" bed, 27-55 SPM, 1997
Category: Gap Frame Single Crank Press Machines
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Komatsu
Model: OBS-150-5
Year: 1997
165 TON KOMATSU OBS-150-5, 165 Ton Komatsu Gap Press., Model OBS 150-5., s/n 13280., 9.84" Stroke., 17.7" shut height over the bolster., 3.94" Power ram adjustment., 27-55 SPM., 27.6" x 21.7" Ram., 49.2" x 29.9" Bed., 1997.
Gun and Deep Hole Drilling Machines
1 Result
3/4" x 36" Eldorado #Mega-K75, 3-Axis CNC Knee Type Gun Drill, 17" X, 10" Y, 25" x 28" table, 3 HP spindle motor, 11,500 RPM, Fanuc 18 CNC, 2000
Category: Gun and Deep Hole Drilling Machines
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Eldorado
Model: MEGA-K75
Year: 2000
ELDORADO K75 3-AXIS CNC KNEE TYPE GUN DRILL, FANUC 18 CNC, 3/4" X 36" STROKE, HIGH PRESSURE COOLANT, TOOLING, DRILLS, GRINDER, ELDORADO MEGA K75 CNC 3-AXIS PRECISION KNEE TYPE DEEP HOLE GUNDRILLING SYSTEM WITH GE FANUC CONTROL & MEGA-FLO HIGH PRESSURE COOLANT SYSTEM, SN: 989, MODEL: MEGA K75 CNC, DRILLING ...more
Horizontal CNC Machining Centers
8 Results
Enshu #GE580H, CNC horizontal machining center, Fanuc Control, 31.5" X, 31.5" Y, 32.7" Z, 40 automatic tool changer, 2500 RPM, 2016
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Enshu
Model: GE580H
Year: 2016
2016 ENSHU GE580H CNC Horizontal Machining Center, 20" x 20" pallets, CAT 50 spindle, Fanuc 31iMB control, 40-position ATC, rapid 2362 IPM, 60 HP, dual rotary APC, Chi Blaster coolant. Robust and capable CNC solution. Dimensions: 232" x 129" x 123"., Pallet, 500mm, Spindle Taper, CAT 50, X Travel, 31.5, Y Travel ...more
Haas #EC-400, 4-axis horizontal machining center, 20" X/20" Y/20" Z, 12000 RPM, 40 automatic tool changer, Cat 40, 30 HP, 2004
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: EC-400
Year: 2004
16"X16"PALLETS,FULL 4TH AXIS,20"XYZ,12,000 RPM,40 TAPER,30 HP,40 ATC, P COOL, HAAS CNC, COOLANT THRU SPINDLE, RENISHAW PROBE, NEW 2004, Travels:, X 20", Y 20", Z 20", Pallet Changer:, Pallet size 15.75"x15.75", Change time 8 sec, Full 4th Axis, Table Capacity 660 lbs, Spindle Speed 12,000 RPM, Drive system Inline ...more
Haas #EC-400PP, 4-axis horizontal machining center, 6 pallet pool, 22" X/25" Y/22" Z, 12000 RPM, 70 automatic tool changer, Cat 40, 30 HP
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: EC-400PP
Year: 2007
2007 HAAS EC-400PP 4-axis CNC Horizontal Machining Center, featuring a 6-pallet pool, 12,000 RPM spindle, and HAAS CNC control. Full 4th axis pallets included. Dimensions: 176" x 92" x 101". Approx. weight: 22,000 lbs. Tombstones and tooling not included., Travels:, X-Axis22, Y-Axis25, Z-Axis22, Rapid Rate: ...more
Kiwa #KNH-426X, 4-Axis CNC horizontal machining center with 6 pallet pool, Fanuc 18iM, 23.6" X, 24" Y, 26.1" Z, 12000 RPM, 120 automatic tool changer, thru spindle coolant, 2011
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Kiwa
Model: KNH-426X
Year: 2011
2011 Kiwa KNH-426X 4-Axis CNC Horizontal Machining Center with 6 Pallet Pool. Key s: Fanuc Series 18iM CNC Control, 120 Position ATC, High Pressure Coolant Ready, Chip Conveyor, Renishaw Probing, Thru Spindle Coolant, Big Plus Spindle System. Used., Pallet Size 15.7" X 15.7", Number of Pallets 6, Maximum Weight 881 ...more
Mazak #HCN-Nexus-4000-III, 4-Axis precision horizontal machining center, 22" X, 25.2" Y, 25.2" Z, 18000 RPM, 60 automatic tool changer, 2016
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mazak
Model: HCN-NEXUS-4000-III
Year: 2016
Discover superior precision with this used 16"X16" MAZAK HCN NEXUS 4000-III, a 4-axis horizontal machining center crafted by the respected manufacturer MAZAK. The model Nexus HCN-4000-III is a prime example of high-performing CNC Horizontal Machining Centers. Produced in 2016, this machine boasts X,Y, and Z of 22.05" ...more
Mori Seiki #NH-4000DCG, 4-Axis CNC Horizontal Machining Center, 22" X, 22" Y, 24.8" Z, 5.51" max. tool diameter, 24.8" swing diameter, 25 HP, 14,000 RPM, 120 automatic tool changer, Mori Fanuc MSX-501 III CNC, 2008
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: NH-4000DCG
Year: 2008
2008 Mori Seiki NH4000DCG 4-Axis CNC Horizontal Machining Center with dual pallet changer, 14,000 RPM spindle, 120 station ATC, and more. Includes spare spindle and 30 tool holders. Machine dimensions: 155"x98"x110", weight: 22,000 lbs., X & Y Axis Travel 22", Z-Axis Travel 24.8", Spindle to pallet distance 3.1" - ...more
Mori Seiki #NHX-4000, CNC Horizontal Machining Center, 22" X, 22" Y, 26" Z, 40 HP, 12,000 RPM, CAT 40, 40 automatic tool changer, Mitsubishi 730 CNC, 2012
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: NHX-4000
Year: 2012
2012 Mori Seiki NHX-4000 CNC Horizontal Machining Center offers precision with 22"x22"x26" XYZ travel, 40 hp, and 12k rpm. 40 ATC, thru spindle coolant, hydraulic fixturing, servo workstation, and more. Reliable choice for high-performance needs., Model NHX4000, Brand MORI SEIKI, Type Horizontal Machining Centers ...more
Okuma #MA-60HB, 4-Axis CNC horizontal machining center, OSP U100M, 39.4" X, 31.5" Y, 31.5" Z, 5000 RPM, 60 automatic tool changer, coolant thru spindle, 2001
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: MA-60HB
Year: 2001
25" x 25" OKUMA MA-60HB 4-AXIS CNC HORIZONTAL MACHINING CENTER, FULL 4TH AXIS, 5,000RPM 50 TAPER, 60 ATC, COOLANT THRU SPINDLE, OSP CNC, size 24.8" x 24.8", X 39.4", Y 31.5", Z 31.5", Power 40 hp, RPM 5,000 RPM, # ATC 60, Taper 50, Pallet-W 25", Pallet-L 25", # Axis 4, OSP U100M CNC, Lift up chip conveyor, Full 4th B ...more
Marking Machines (Including Laser Markers)
1 Result
Schmidt #509, Hydraulic Roll Marking Machine, 1.45 ton, 8.5" width x 6.75" D table, 1/2" ram stroke, 3-7/16" throat, 4.5" - 7.5" die space, 20-100 psi
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Schmidt
Model: 509
Used Schmidt Hydraulic Roll Marking Machine Model 509. s max 1.45 tons ram pressure, 1/2" stroke, dual palm controls. Approx 200 lbs, 22"x18"x35", working pressure 20-100 PSI. Explore precise marking with adjustable 3.5" cross slide., Ram Pressure Maximum1.45 Tons, Ram Stroke Maximum1/2, Ram Vertical Handwheel ...more
Misc. Laboratory and Research Equipment
2 Results
Automatic laboratory specimen prep machine, Struers #Hexamatic, grinding/polishing, 2014
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Struers
Model: HEXAMATIC
Year: 2014
2014 STRUERS Hexamatic lab prep machine for efficient grinding and polishing. Enhance your specimen processing with this robust, used automatic equipment., EXTREME, VERSATILITY, For the preparation of both individual specimens and specimen holders, With or without conveyor, for the uninterrupted preparation of larger ...more
Automatic laboratory specimen prep machine, Struers #Hexamatic, grinding/polishing, 2013
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Struers
Model: HEXAMATIC
Year: 2015
2015 STRUERS Hexamatic lab prep machine for efficient grinding and polishing. Enhance your specimen processing with this robust, used automatic equipment., EXTREME, VERSATILITY, For the preparation of both individual specimens and specimen holders, With or without conveyor, for the uninterrupted preparation of larger ...more
Miscellaneous Packaging Equipment
1 Result
Fully automated erected box system, Packsize #X5, up to 600 boxes/hr., compact design, 2021
Category: Miscellaneous Packaging Equipment
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Packsize
Model: FULLY AUTOMATED ERECTED BOX SYSTEM
Year: 2021
2021 Packsize X5 Fully Automated Erected Box System. Optimize your operation with up to 600 boxes per hour. s include Order Induction, Pick Optimization, and Cubing Integration. Compact design: max product dimensions 30"x20"x20"., Technical, Cycle Time 6.4 seconds, Machine Speed 500 600 per hour*, z-Fold Supply Up to ...more
Reciprocating Surface Grinders - Horizontal Spindle
1 Result
16" x 32" Chevalier #FSG-1632ADII, Horizontal Surface Grinder, 35-3/8" X, 18" Y, 24" spindle-to-table, 14" x 2" x 5" grinding wheel, 5 HP, 3450 RPM, 2008
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Chevalier
Model: FSG-1632ADII
Year: 2008
CHEVALIER FSG-1632ADII Automatic Horizontal Surface Grinder, Automatic surface grinding cycle, Automatic plunge grinding cycle, 16" x 32" Electromagnetic chuck with chuck controls, Overhead wheel dresser, Coolant and filtration system, MODEL. FSG-1632ADII, GRINDING CAPACITY. 16" X 32", SPINDLE TO TABLE (MAXIMUM). 24" ...more
Rotary Screw Air Compressors (Positive Displacement)
1 Result
38 cfm, 116 psi, Hodge #HD10 HP rotary screw type compressor w/dryer & tank, new not installed
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Hodge
Model: HD10
Year: 2022
Hodge HD10 HP Rotary Screw Type Compressor with Dryer, New not installed, Hodge HD10 HP Rotary Screw Type Compressor with Dryer, New not installed, Hertz 9602-KA HOWS 70 Roto Inject Oil Water Separator N/A 1, Hertz 9602-KA HOWS 70 Roto Inject Oil Water Separator N/A 2, Hodge HD10 Direct Drive Rotary Screw Compressor ...more
Scissor Lifts
1 Result
705 lb. LCMG #AS3246, Hydraulic Scissor Lift, 32' max. platform height, 48" platform width, 4.5 HP, 3480 psi, 24 Volt, 2018
Category: Scissor Lifts
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Lcmg
Model: AS3246
Year: 2018
2018 LCMG AS3246 HYDRAULIC SCISSOR LIFT ELEVATING PLATFORM, 32' LIFT, ONLY 110 HOURS USE, 2018 LCMG AS3246 HYDRAULIC SCISSOR LIFT ELIVATING PLATFORM, LGMG AS3246 Elevating Work Platform, ', Hydraulic Electric 32 X 48 wide, ', 110 hours, ', New batteries, ', 32 ft of elevation, ', Sliding ...more
Swiss Type and Lathe CNC Automatic Screw Machines
7 Results
Citizen #K16VIIP, Swiss Type CNC Sliding Headstock Lathe, 7.87" max. machining length, 0.63" bar diameter, 10.7 HP, 10,000 RPM, Fanuc CNC, 200 Volt, 2007
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Citizen
Model: K16VIIP
Year: 2007
2007 16mm Citizen K16VIIP Swiss Type CNC Lathe for sale. s include 10 positions, 7 axes, 2 spindles with max 16mm bar capacity and 200mm machining length. Comes with parts catcher, bar feeder, and more., MACHINE, Counter Spindle Max Spindle Speed:, 10000 rpm, Total installed power:, 8 kW, Supply voltage:, 200 V, Live ...more
Citizen #M32-4M8, 10-Axis CNC Swiss Type Automatic Lathe, 1.38" max. machining diameter, 12.6" headstock stroke, 10 HP, 8000 RPM, 10-turret, Meldas 700M CNC, 2014
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Citizen
Model: M32-4M8
Year: 2014
CITIZEN M32-4M8 10-AXIS CNC SWISS TYPE AUTOMATIC LATHE WITH B-AXIS CONTOURING, NEW 2014, B-AXIS 4 PLUS 1 CONTOURING, 10 POSITION TURRET LIVE TOOLING, Y-AXIS REAR TOOL BLOCK, HIGH PRESSURE COOLANT, IEMCA 338 HD BAR FEEDER, Technical data, M32-4M8, Main side, Number of axis (total) 10 + 2, Main spindle Z1 + C1+ B1, Gang ...more
DMG, Gildemeister #Sprint-20-Linear, CNC Swiss Type Lathe, 6+2 axes, 0.78" bar, 7.38/4.96 HP, 10000 RPM, DMG SLIMline Fanuc 310i control, 2011
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Dmg
Model: SPRINT-20-LINEAR
Year: 2011
2011 DMG Gildemeister Sprint 20/8 Linear CNC Swiss Lathe, 6+2 axes, bar capacity 0.78", spindle speed 10,000 RPM, rapid traverse 1,574.8 IPM. Includes Fanuc control, barfeed, live tooling, chip conveyor, and parts catcher. Compact and efficient., Bar Capacity: 0.78", Spindle Speed: 10,000 RPM, Spindle Motor: 5 HP ...more
Nomura #NN20J3XB, CNC Swiss Type Lathe, 12.13" X, 6.52" Y, 7.99" Z, 7.87" machining length, 5 HP, 10,000 RPM, Mitsubishi M80V CNC, 2024
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Nomura
Model: NN20J3XB
Year: 2024
2024 NOMURA NN20J3XB CNC SWISS TYPE SLIDING HEADSTOCK AUTOMATIC LATHE, TURBO BAR FEEDER, LIKE NEW, NN-20J3XB CNC Swiss-Type Automatic Lathe, The NN-20J3XB builds on the proven 20J3 platform with B-axis flexibility for multi-angle drilling and milling in a single setup. Type A adds a programmable B-axis on the main ...more
Tornos #Multiswiss-6x16, CNC 6-Spindle Automatic Screw Machine, 2.95" X, 5.9" Z, 0.63" max. swing, 2.76" max. turning/cutting length, 7.5 HP, 8000 RPM, 2019
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Tornos
Model: MULTISWISS-6X16
Year: 2019
2019 Tornos Multiswiss 6x16 CNC 6-Spindle Automatic Screw Machine. Key : 16 mm bar capacity, 8,000 rpm spindle speed, 5.6 kW power. Suitable for precision machining, offering advanced oil cooling and a 900L oil tank. Compact size, 7,000 kg weight., X-Travel: 2.95", Z-Travel: 5.90", Max Swing Over Bed: 0.63", Max ...more
Tsugami #B0126-V, 6-Axis CNC Swiss Type Lathe, 6.69" max. headstock, 5 HP, 12000 RPM, 28 tool positions, Fanuc 0i-TF Plus, 15 hours, 2024
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Tsugami
Model: B0126-V
Year: 2024
TSUGAMI B0126-V, 2024, Swiss type, used. s 6 axes, 28 tool positions, and a max spindle speed of 12,000 rpm. Y2 axis for advanced milling operations. Compact footprint of 68.9" x 41.5" x 66.9". Includes Fanuc 0i-TF Plus control., Maximum Bar Stock 0.5 (12 mm), # Axes 6, Sliding Headstock / Guide Bushing YES ...more
Tsugami #B038TE, 9-Axis CNC Swiss Type Turning Center, 1.5" max. bar, 9.84" max. machining length, 0.63" max. drilling diameter, 14.8 HP, 5000 RPM, Fanuc 31i-B CNC, 2016
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Tsugami
Model: B038TE
Year: 2016
38MM TSUGAMI B038TE 9-AXIS PRECISION CNC TURNING CENTER LATHE, Max. Bar Stock 38 mm, Number of Axes 9, Sliding Headstock/Guide Bushing Yes, Convertible Run w/o Guide Bushing (Chucker) No, Tool Positions (std/max) 45 Max., Live Tool Positions (std/max) (Turret) 8 Rotary Tools, Control Fanuc 31i-B, Main Spindle Speed ...more
Tooling and Accessories - Miscellaneous
1 Result
Uptime CNC machine monitoring software
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
NO NEW SENSORS. NO NEW METERS. NO LEAD TIME., Harness the power of your existing machine data, OUR SOLUTION, EARLY FAILURE PREDICTION:, Predict machine failures before they happen., QUALITY VARIABILITY PREDICTION:, Take proactive steps to prevent quality problems before they create waste., REAL-TIME OPTIMIZER: ...more
Universal Cylindrical Grinding Machines
2 Results
10" x 20" Supertec #G25P-50CNC, CNC Universal Cylindrical Grinder, 10" max. grinding diameter, 16" x 1.5" x 5" grinding wheel, 5 HP, 14,000 RPM, Fanuc Oi Mate-TD CNC, 2013
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Supertec
Model: G25P-50CNC
Year: 2013
2013 Supertec G25P-50CNC grinder in used condition. s 10" swing over table, 20" between centers, 16" grinding wheel, and Fanuc Oi Mate-TD CNC control. Includes coolant system, wheel dresser, Marposs T18 Touch Probe, and more. Ideal for precision work., SWING OVER TABLE:. 10", DISTANCE BETWEEN CENTERS:. 20", MAX. ...more
10" x 20" Supertec #G25P-50CNC, CNC Universal Cylindrical Grinder, 10" max. grinding diameter, 16" x 1.5" x 5" grinding wheel, 5 HP, 14,000 RPM, Fanuc Oi Mate-TD CNC, 2014
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Supertec
Model: G25P-50CNC
Year: 2014
2014 Supertec G25P-50CNC grinder in used condition. s 10" swing over table, 20" between centers, 16" grinding wheel, and Fanuc Oi Mate-TD CNC control. Includes coolant system, wheel dresser, Marposs T18 Touch Probe, and more. Ideal for precision work., SWING OVER TABLE:. 10", DISTANCE BETWEEN CENTERS:. 20", MAX. ...more
160 CFM @ 25" Hg., Travaini #TRO160-1A, Vacuum Pump, 10 HP, 208-230/460 Volts, 2003, (2 available)
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Travaini
Model: TRO160-1A
Year: 2003
TRAVAINI TRO160-1A 10HP VACUUM PUMP, 160 CFM, 160 CFM, -25hg, 10 hp, 208-230/460 Volts.
200 CFM @ 24" Hg., Travaini #TRO200V, Vacuum Pump, 15 HP, oil reservoir, de-mister, heat exchanger, 230/460 Volts, 2002
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Travaini
Model: TRO200V
Year: 2002
TRAVAINI TRO200V 15HP VACUUM PUMP, 400 CFM, 15 HP, 230 / 460 Volts, 40 / 20 Amps, 200 CFM @ 24hg, Heat Exchanger, Oil Reservoir, De-mister, Oil Sealed.
200 CFM, Dekker #VMX0303KA1-01, vacuum pump, 15 HP, 2003
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Dekker
Model: VMX0303KA1-01
Year: 2003
DEKKER VMX0303KA1-01 15HP VACUUM PUMP, 200 CFM.
272 CFM, Rietschle #VLR400, vacuum pump, 10 HP, 2011 (2 available)
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Rietschle
Model: VLR400
Year: 2011
RIETSCHLE (GARDNER DENVER) VLR400 10HP VACUUM PUMP, 272 CFM.
300 CFM, Dekker #VMX0303KA1-01, vacuum pump, 20 HP, NEW 2017
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Dekker
Model: VMX0303KA1-01
Year: 2017
2017 DEKKER VMX0303KA1-01 20HP VACUUM PUMP, NEW 2017, 300 CFM.
300 CFM, Dekker #VMX0303KA1-01, vacuum pump, 20 HP, 2004
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Dekker
Model: VMX0303KA1-01
Year: 2004
DEKKER VMX0303KA1-01 20HP VACUUM PUMP, 300 CFM.
300 CFM, Travaini #TRO300S, liquid ring vacuum pump, 20 HP, 230/460 V., 2000
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Travaini
Model: TRO300S
Year: 2003
TRAVAINI TRO400S 25HP VACUUM PUMP, 400 CFM, Travaini TRO 400S, The Travaini TRO 400S is a high-efficiency DynaSeal liquid ring vacuum pump designed for heavy-duty industrial vacuum applications. It s a monoblock construction with all components integrated for ease of installation and maintenance., Key & s ...more
353 CFM, Rietschle #VLR500, vacuum pump, 15 HP, 2009
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Rietschle
Model: VLR500
Year: 2009
RIETSCHLE (GARDNER DENVER) VLR500 15HP VACUUM PUMP, 353 CFM.
400 CFM, Travaini #TRO400S, liquid ring vacuum pump, 25 HP, 230/460 V., 27" HgV max, 2002
Category: Vacuum Pumps
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Travaini
Model: TRO400S
Year: 2002
TRAVAINI TRO400S 25HP VACUUM PUMP, 400 CFM, Travaini TRO 400S, The Travaini TRO 400S is a high-efficiency DynaSeal liquid ring vacuum pump designed for heavy-duty industrial vacuum applications. It s a monoblock construction with all components integrated for ease of installation and maintenance., Key & s ...more
Vertical CNC Machining Centers
16 Results
Amera-Seiki #VTC-5, CNC Vertical Traveling Column Machining Center, 86.6" X, 24.4" Y/Z, 98.4" x 23.6" table, 20 HP, 8000 RPM, 24/32/40 automatic tool changer, Fanuc 18i MB CNC, 2022
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Amera-Seiki
Model: VTC-5
Year: 2022
2022 AMERA SEIKI VTC-5 TRAVELING COLUMN CNC VERTICAL MACHINING CENTER, NEW 2022 78"X, 24" Y 24"Z, with HAAS 5-AXIS TRUNION ROTARY TABLE, Vertical Traveling Column Mill (VTC), Do you need higher efficiency than a traditional Vertical Machining Center can offer? With our VTC, the table is fixed and all XYZ machine ...more
AWEA #BM-1200, 3-Axis CNC Vertical Machining Center, 47.2" X, 24.9" Y, 24.9" Z, 20 HP, 6000 RPM, 24 automatic tool changer, Fanuc 18i-MB CNC, 2007
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Awea
Model: BM 1200
Year: 2007
TOYODA AWEA BM 1200 3-AXIS CNC VERTICAL MACHINING CENTER 50 TAPER, NEW 2007 6000 RPM GEARED SPINDLE, HYD CLAMPING, 24 POS ATC, FANUC 18i CNC, X axis travel 47.244", Y axis travel 24.939", Z axis travel 24.939", Rapid rate x axis 943 IPM, Rapid rate y axis 943 IPM, Rapid rate z axis 787 IPM, Max table load 2,640 LBS ...more
Brother #Speedio-S500X1, 4-Axis CNC vertical machining center, 19.7" X, 15.7" Y, 11.8" Z, 10000 RPM, 21 automatic tool changer, coolant thru spindle, 2015
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Brother
Model: SPEEDIO-S500X1
Year: 2015
2015 Brother Speedio S500X1 CNC, used 4-axis vertical machining center 10,000 RPM spindle, 21 position ATC, Tsudakoma 4th axis rotary with tailstock RNA-201, high-pressure coolant thru spindle, chip conveyor, and hydraulic clamping., Table / Pallet Size: 23.4" x 15.7", X-Travel: 19.70", Y-Travel: 15.70", Z-Travel: ...more
Chiron #FZ-12W-HS, high speed CNC vertical machining center with pallet changer, 21.6" X, 15.7" Y, 15.7" Z, 40000 RPM, 48 automatic tool changer, 2015
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Chiron
Model: FZ-12W-HS
Year: 2015
For sale: 2015 Chiron FZ-12W HS CNC Vertical Machining Center with pallet changer. s include rapid feed up to 75 m/min, spindle speed up to 40,000 RPM, and Fanuc 31i-B5 CNC control. Comes with 48-tool capacity and pallet changer., Travels:, X-Axis 21.65" (550 mm), Y-Axis 15.74" (400 mm), Z-Axis 15.74" (400 mm), Axis ...more
DMG Mori Seiki #CMX-800V, 3-Axis CNC Vertical Machining Center, 31.5" X, 22" Y, 20.1" Z, 43.3" x 22" table, 20000 RPM, 30 automatic tool changer, Fanuc 0i-MF CNC, 5,859 hours, 2018
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Dmg Mori
Model: CMX 800V
Year: 2018
2018 DMG MORI CMX 800V 3-Axis CNC Vertical Machining Center, 5859 Hours, 20,000 rpm spindle, 30 ATC Fanuc CNC, 2018 DMG Mori CMX 800V Vertical Machining Center, used, offers 800mm X, 560mm Y, 510mm Z travel with a 20,000 RPM spindle, 30-tool ATC, and BT40 taper. s Fanuc 0i-MF CNC and chip conveyor/coolant system. ...more
DMG Mori Seiki #NVX5060, CNC Vertical Machining Center, 23.6" X, 20.9" Y, 20.1" Z, 23.6" x 35.4" table, 20 HP, 12000 RPM, 30 automatic tool changer, Celos CNC, 2014
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Dmg Mori
Model: NVX5060
Year: 2014
2014 DMG MORI NVX5060 3-AXIS CNC VERTICAL MACHINING CENTER, 12,000 RPM, 30 ATC, CELOS CNC CONTROLS, X 23.6", Y 20.9", Z 20.1", Power 15 kW, RPM 12,000 RPM, Spindle taper 40, # ATC 30, Table-W 23.6", Table-L 35.4", # Axis 3.
DN Solutions #DNM-6700, CNC Vertical Machining Center, 51.1" X, 26.3" Y, 24.6" Z, 59" x 26.37" table, 25 HP, 12000 RPM, 30 automatic tool changer, CAT 40, Fanuc 0i-Plus CNC, 220 Volt, 2022
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Dn Solutions
Model: DNM 6700
Year: 2022
2022 DN SOLUTIONS DNM 6700 4-AXIS CNC VERTICAL MACHINIG CENTER, NEW 2022, NIKON 4TH AXIS TABLE, OTS PROBE, COOLANT THRU SPINDLE, 3500 HOURS, Doosan "DNM 6700" 4 Axis Vertical Machining Center (2022), Large Linear Roller Guides (X - 45 mm \ 1.772", Y - 45 mm \ 1.772", Z - 45 mm \ 1.772"), Servo motors mounted directly ...more
Fanuc #Robodrill-Alpha-D21LIB5-ADV, 4-Axis CNC Drill Tap Vertical Machining Center, 19.7" X, 15.7" Y, 13" Z, 25.6" x 15.74" table, 15 HP, 24,000 RPM, 21 automatic tool changer, Fanuc 31i-B5 CNC, 2021
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Fanuc
Model: ROBODRILL ALPHA D21LIB5 ADV
Year: 2021
FANUC ROBODRILL ALPHA D21LIB5 ADV, 2021, used vertical machining center. : X/Y/Z-27.6/15.7/15.7, RPM-24000, #ATC-21, Taper-Big Plus BBT30, Table-33.5x16.1, 4-axis ROTARY TABLE, COOLANT THRU, CHIP CONVEYOR, Fast Ethernet, 3700 Hours, X Axis Travel: 19.68, Y Axis Travel: 15.74, Z Axis Travel: 12.99, Rapid Rate X Axis: ...more
Fanuc #Robodrill-Alpha-D21lIB5-ADV, 4-Axis CNC Drill Tap Vertical Machining Center, 19.6" X, 15.7" Y, 12.9" Z, 15 HP, 10000 RPM, 21 automatic tool changer, Fanuc 31i B5 control, 2020
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Fanuc
Model: ROBODRILL-ALPHA-D21LIB5-ADV
Year: 2020
FANUC ROBODRILL ALPHA D21LIB5 ADV, 2020, used vertical machining center. : X/Y/Z-27.6/15.7/15.7, Power-19, RPM-10,000, #ATC-21, Taper-Big Plus BBT30, Table-33.5x16.1, 4-axis TRUNNION ROTARY TABLE, COOLANT THRU, CHIP CONVEYOR, Fast Ethernet, Auto Door, X Axis Travel: 19.68, Y Axis Travel: 15.74, Z Axis Travel: 12.99 ...more
Haas #Mini-Mill, CNC Vertical Machining Center, 36" x 12" table, 16" X, 12" Y, 10" Z, 7.5 HP, 6000 RPM, 10-station tool changer, CAT 40, Haas 32-Bit CNC, 208/240 Volt, 2006
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: MINI MILL
Year: 2006
Haas Mini Mill CNC 3-Axis Vertical Machining Center from 2006. s Haas 32-Bit CNC Control, 10-Station Carousel Tool Changer, CAT 40 Taper, 6000 RPM spindle, and a chip auger. Dimensions: 70" x 80" x 98", weight: 3400 lbs. Power: 208/240V., Haas Mini Mill CNC Machining Center, Haas 32-Bit CNC Control, Cat-40 Spindle ...more
Haas #TM-0P, 4-Axis CNC Toolroom Mill, 20" X, 12" Y, 16" Z, 38.4" x 10.5" table, 7.5 HP, 6000 RPM, 10 automatic tool changer, rotary table, Renishaw probe, 2022
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: TM-0P
Year: 2022
COOLANT, HIGH SPEED MACHINING, RIGID TAPING, VISUAL PROGRAMMING, RENISHAW PROBE, Travels S.A.E. Metric, X Axis 20.00 in 508 mm, Y Axis 12.00 in 305 mm, Z Axis 16.00 in 406 mm, Spindle Nose to Table (~ max) 20.0 in 508 mm, Spindle Nose to Table (~ min) 4.0 in 102 mm, Spindle, Spindle S.A.E. Metric, Max Rating 7.5 hp ...more
Haas #UMC-500, 5-Axis CNC Vertical Machining Center, 24" X, 16" Y, 16" Z, 30 HP, 10,000 RPM, 30-position automatic tool changer, 55-gallon coolant, Renishaw probe, 2022
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: UMC-500
Year: 2022
2022 HAAS UMC-500 5-axis cnc vertical machining center, 10,000 rpm inline spindle, 30 pos ATC, Probe, Coolant thru, High speed machining, Travels S.A.E METRIC, X Axis 24.00 in 610 mm, Y Axis 16.00 in 406 mm, Z Axis 16.00 in 406 mm, Spindle Nose to Platter (~ max) 20.0 in 508 mm, Spindle Nose to Platter (~ min) 4.0 in ...more
Haas #VF-2SSYT, CNC Vertical Machining Center, 30" X, 20" Y, 20" Z, 36" x 18" table, 30 HP, 12,000 RPM, 30 automatic tool changer, Haas CNC, 220 Volt, 3PH, 2021
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: VF-2SSYT
Year: 2021
For sale: HAAS VF-2SSYT 3-axis CNC VMC, new in 2021. s 30"x20"x20" travel, 12,000 rpm spindle, 30 hp, 30+1 tool changer, 1400 in/min rapids. Includes Haas CNC control, extended Y-axis, rigid tapping, and more. Optimize your production today!, X Axis 30 " 762 mm, Y Axis 20 " 508 mm, Z Axis 20 " 508 mm, Spindle Nose to ...more
Mazak #Variaxis-I-300AWC, 5-Axis CNC vertical machining center, complete coolant system, work light, 2019
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mazak
Model: VARIAXIS-I-300AWC
Year: 2019
MAZAK VARIAXIS I-300 5-AXIS CNC VERTICAL MACHING CENTER WITH AUTOMATIC WORK CHANGER NEW 2019, 18,000 RPM, HSK 100, 205 ATC, COOLANT THRU, LOADED WITH OPTIONS, Standard :, Stroke X-axis travel 350mm, Y axis travel 550mm, Z axis travel 510mm, A axis travel /table tilt -120 ~ +30, C axis travel /table rotation +/-360 ...more
Okuma #MCR-25-BII, bridge type CNC universal machining center, OSP700m Control, 157" X, 92" Y, 29.4" Z, 4000 RPM, 180 automatic tool changer
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: MCR-25-BII
OKUMA MCR-25-BII Bridge-Type CNC Universal Machining Center, used, s 157" X-axis, 92" Y-axis, 29.4" Z-axis, 60 hp spindle motor, 4,000 RPM speed, ATC capacity of 180, Taper 50, Dual Pallet, and OSP700m CNC Control., X Axis 157", Y Axis 92", Z Axis 29.4", Spindle Motor 60 hp, Spindle Speed 4,000 RPM, ATC Capacity 180 ...more
Okuma #MU-500VA, 5-Axis CNC vertical machining center, OSP P200M-H Control, 15000 RPM, 32 automatic tool changer, from Aerospace plant, 2007
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Okuma
Model: MU-500VA
Year: 2007
OKUMA MU-500VA 5-AXIS CNC VERTICAL MACHINING CENTER, FROM AEROSPACE PLANT, 500MM TABLE PLATEN, 15,000 RPM, 32 POSITION TOOL CHANGER, OSP P200M-H CNC CONTROL NEW 2007, Travels, X-axis (saddle left/right) 49.21, Y-axis (pallet front/back) 25.98, Z-axis (spindle up/down) 21.25, A-axis +20~-110 deg., C-axis 360 deg. ...more
Zonato #Acqua-5, 5-Axis CNC Waterjet Cutting System, 78" x 138" cutting area, 55,000 psi, CAD-CAM software, 400 Volt, 2025
Category: Waterjet Cutters
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Zonato
Model: ACQUA 5
Year: 2024
ZONATO ACQUA 5 CNC 5-AXIS WATERJET CUTTING SYSTEM, NEW 2024, KMT INTENSIFIER PUMP, ONE YEARS USE, ZONATO ACQUA 5 CNC Waterjet Cutting System, The ACQUA 5 Waterjet is used for cutting using a high-pressure pump that emits a jet of water mixed with abrasive that can pierce and cut with extreme precision thicknesses of ...more
Wire EDM Machine
1 Result
Fanuc #Robocut-A-C400iA, 5-Axis wire cut Electrical Discharge Machine, .0120" wire diameter, 30.5" x 23.6" table, 14.6" X, 10.6" Y, 10.2" Z, 2015
Category: Wire EDM Machine
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Fanuc
Model: ROBOCUT-A-C400IA
Year: 2015
FANUC ROBOCUT A-C400iA 5-AXIS WIRE CUT EDM, NEW 2015, X-Axis Travel 14.6 '' Table Size (LxW) 30.5" x 23.6" Y-Axis Travel 10.6 '', Wire Diameter 0.0120 '' Z-Axis Travel 10.20 '', Technical Data, Main processor : (Qty. 1) 64 bit, Aux processors : (Qty. 4) 32 bit, Control method : ...more
Woodworking CNC Routers
1 Result
Thermwood #C67, 5-Axis CNC Router, 60" X, 60" Y, 24" Z, 5' x 5' Table, 0-900 IPM, 8 HP, 18000 RPM, 220/440 V, 6-Position Tool Changer, 1999
Category: Woodworking CNC Routers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Thermwood
Model: C67
Year: 1999
THERMWOOD MODEL C67 5 AXIS CNC ROUTER, 5' x 5' TABLE, 24" z-axis, 6 position tool changer, Thermwood CNC Windows, *MOVING TABLE STYLE MACHINE*, Table 5'x5', Axis X 60", Axis Y 60", Axis Z 24", Axis 4 Rotation 360 Degrees Rotation, Axis 5 Tilt 180 Degree tilt, Feed speeds 0 to 900 IPM, Spindle 8HP ...more
