For Sale by CNC Exchange div. Gray Machinery Co.

Surplus Record Dealer Since 1966
Location: Prospect Heights, IL
Contact Glenn Gray
Phone Number: 847...> Show Phone Number 847-537-7700
Let the seller know you found their listing on Surplus Record!
Description
2017 EDGE PATRIOT 551 automatic bar feeder with 35 mm guide channels. Handles bar stock from 554.5 mm and lengths up to 12 ft, with an automatic loading magazine for CNC lathes. Used.
The Edge Technologies Patriot 551 automatic bar feeder, available in 6 or 12 configurations, is designed specifically for the U.S. marketplace, to automatically feed round, square, and hexagonal bar stock in fixed headstock and Swiss CNC lathes with a stock diameter range of 5-54.5mm and in lengths up to 12 feet.
Features: Patriot 551 Bar Feeder
Bar diameter capacity: 5mm to 54.5mm (0.196 to 2.145)
Automatic loading magazine 12 linear inches of Rack Capacity
Double pusher, space-saving design
Polyurethane quick-change guide channel noise & vibration dampening
Hydrodynamic support via high-volume oil flow into channels
(1) Guide channel set to be chosen by customer. Several sizes to choose from, each handling a specific stock range. See table above (spindle liner required if channel set is not lathes max capacity)
(1) Front hard nose matched to the guide channel set
(1) O.D. bar stock collet to be chosen by customer (specific collet needed for each stock diameter)
(1) Bushing block for outboard anti-vibration device to be chosen by customer based on bar diameter
Custom lathe cable and interface plugs
Technical Specifications
Bar Diameter 5mm 54.5mm (0.196 to 2.145)
Bar Length 1000mm 3800mm (39.4 125)
Magazine Rack Capacity 304mm (12)
Maximum Remnant Length 406mm (16)
Bar Loading Cycle Time Approx. 30 sec for 12 bars
Feed Force (Pusher Torque) Max 450 N, adjustable
Forward Feed Rate 593mm/sec (1400 in/min) max, adjustable
Return Feed Rate 1000mm/sec (2360 in/min) max, adjustable
Power Consumption 1.5 kW/2 kVA
Operating Voltage 230 V/60 Hz 3 phase
Control Voltage 24V DC
Oil Capacity 57 liters (15 gallons)
Oil Viscosity ISO 100 cST Machine oil
ISO BG32 Air oil
Compressed Air Supply 6 bar (90 psi)
Compressed Air Consumption ~8 liters per loading cycle
Machine Weight (w/out Oil) 1224 kg (2700 lbs)
Material Straightness Specification 0.007 TIR/foot of material (V blocks, 6 equidistant)
Guide Channel Sets Pusher Diameter Minimum Bar Size Maximum Bar Size Max. Bar Size With Front Remnant Expulsion *
13 mm 12.5 mm 3 mm (.118) 10 mm (.393) 12 mm (.472)
17 mm 16.5 mm 5 mm (.196) 15 mm (.591) 16 mm (.630)
21 mm 20.5 mm 8 mm (.315) 19 mm (.750) 20 mm (.787)
26 mm 25.0 mm 8 mm (.315) 22.2 mm (.875) 25 mm (.984)
28 mm 27.5 mm 10 mm (.393) 25.4 mm (1.000) 27 mm (1.062)
33 mm 32.5 mm 10 mm (.393) 28.5 mm (1.125) 32 mm (1.260)
36 mm 34 or 35.5 mm 12.7 mm (.500) 32 mm (1.260) 35 mm (1.377)
39 mm 38.0 mm 15.8 mm (.625) 33.3 mm (1.312) 38 mm (1.500)
43 mm 42.5 mm 19 mm (.750) 38 mm (1.500) 42 mm (1.653)
46 mm 45.5 mm 22.2 mm (.875) 41.2 mm (1.625) 44.5 mm (1.750)
52 mm 51.0 mm 25.4 mm (1.000) 47.75 mm (1.880) 50.5 mm (2.000 front ejection only)
56 mm 55.0 mm 25.4 mm (1.000) 50.8 mm (2.000) 54.5 mm (2.145 front ejection only)
The Edge Technologies Patriot 551 automatic bar feeder, available in 6 or 12 configurations, is designed specifically for the U.S. marketplace, to automatically feed round, square, and hexagonal bar stock in fixed headstock and Swiss CNC lathes with a stock diameter range of 5-54.5mm and in lengths up to 12 feet.
Features: Patriot 551 Bar Feeder
Bar diameter capacity: 5mm to 54.5mm (0.196 to 2.145)
Automatic loading magazine 12 linear inches of Rack Capacity
Double pusher, space-saving design
Polyurethane quick-change guide channel noise & vibration dampening
Hydrodynamic support via high-volume oil flow into channels
(1) Guide channel set to be chosen by customer. Several sizes to choose from, each handling a specific stock range. See table above (spindle liner required if channel set is not lathes max capacity)
(1) Front hard nose matched to the guide channel set
(1) O.D. bar stock collet to be chosen by customer (specific collet needed for each stock diameter)
(1) Bushing block for outboard anti-vibration device to be chosen by customer based on bar diameter
Custom lathe cable and interface plugs
Technical Specifications
Bar Diameter 5mm 54.5mm (0.196 to 2.145)
Bar Length 1000mm 3800mm (39.4 125)
Magazine Rack Capacity 304mm (12)
Maximum Remnant Length 406mm (16)
Bar Loading Cycle Time Approx. 30 sec for 12 bars
Feed Force (Pusher Torque) Max 450 N, adjustable
Forward Feed Rate 593mm/sec (1400 in/min) max, adjustable
Return Feed Rate 1000mm/sec (2360 in/min) max, adjustable
Power Consumption 1.5 kW/2 kVA
Operating Voltage 230 V/60 Hz 3 phase
Control Voltage 24V DC
Oil Capacity 57 liters (15 gallons)
Oil Viscosity ISO 100 cST Machine oil
ISO BG32 Air oil
Compressed Air Supply 6 bar (90 psi)
Compressed Air Consumption ~8 liters per loading cycle
Machine Weight (w/out Oil) 1224 kg (2700 lbs)
Material Straightness Specification 0.007 TIR/foot of material (V blocks, 6 equidistant)
Guide Channel Sets Pusher Diameter Minimum Bar Size Maximum Bar Size Max. Bar Size With Front Remnant Expulsion *
13 mm 12.5 mm 3 mm (.118) 10 mm (.393) 12 mm (.472)
17 mm 16.5 mm 5 mm (.196) 15 mm (.591) 16 mm (.630)
21 mm 20.5 mm 8 mm (.315) 19 mm (.750) 20 mm (.787)
26 mm 25.0 mm 8 mm (.315) 22.2 mm (.875) 25 mm (.984)
28 mm 27.5 mm 10 mm (.393) 25.4 mm (1.000) 27 mm (1.062)
33 mm 32.5 mm 10 mm (.393) 28.5 mm (1.125) 32 mm (1.260)
36 mm 34 or 35.5 mm 12.7 mm (.500) 32 mm (1.260) 35 mm (1.377)
39 mm 38.0 mm 15.8 mm (.625) 33.3 mm (1.312) 38 mm (1.500)
43 mm 42.5 mm 19 mm (.750) 38 mm (1.500) 42 mm (1.653)
46 mm 45.5 mm 22.2 mm (.875) 41.2 mm (1.625) 44.5 mm (1.750)
52 mm 51.0 mm 25.4 mm (1.000) 47.75 mm (1.880) 50.5 mm (2.000 front ejection only)
56 mm 55.0 mm 25.4 mm (1.000) 50.8 mm (2.000) 54.5 mm (2.145 front ejection only)
Get Your Price from CNC Exchange div. Gray Machinery Co.!
Buyers Who Viewed This Listing Also Viewed:
Edge Technologies #Patriot-338, Bar Feeder, 8' Max Length, 2018
Category: Bar Feeders and Loaders
Seller: Aucto
Location: Prospect Heights, IL
Mfr: Edge Technologies
Model: PATRIOT 338
Year: 2018
Introducing the 2018 Edge Technologies Patriot 338 Bar Feeder. This magazine-type bar feeder is designed to support fixed or sliding headstock lathes and accommodates round bar stock from 3 mm to 42 mm (0.118" to 1.653") in diameter. It supports bar lengths from 1000 mm to 3800 mm (39.4" to 12'5"), with the ...more
Edge Technologies #Patriot-551, automatic bar loader, 2" capacity, 8' bar length, 2011
Category: Bar Feeders and Loaders
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2010
Edge Technologies Patriot 551 Automatic Bar Loader, Full 6' bar cap, New 2011, Can load up to 8' bars, 45mm channel installed, To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm ...more
Edge Technologies #Miyano-M-542, magazine bar feed, 1.26" diameter, 12' length, 2021
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Edge Technologies
Model: MIYANO-M-542
Year: 2021
EDGE TECH MIYANO 542 MAGAZINE BARFEED NEW: 2021 ** HAS NEVER BEEN USED ** This barfeed has never had any bars installed in it for use. It was purchased to be used on a Miyano BNA-42GTY Direct From OEM Brochure: Power consumption: 2 KWFeed force: adjustable, max. 450 N (101 lbf)Forward feed rate: adjustable 750 mm/sec ...more
Edge Technologies #Patriot-551, magazine type bar loaders, 2.0079" cap., 12' bar length, 2021
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2021
EDGE Patriot 551 Magazine Bar Loader (used) New 2021 - used on a fixed headstock CNC Lathe w/ 2 channel sets, 5mm to 51mm, 12' bars, barely used, like new condition. Great Deal!, 2021 EDGE TECHNOLOGIES PATRIOT 551, Capacity. 51 mm, Bar Length. 12'.
JUST ADDED!
Edge Technologies #FMB-Turbo-5-65, 12' magazine bar feeder, 2.5" capacity, 12.5' bar length, 2012
Category: Bar Feeders and Loaders
Seller: Used CNC LLC
Location: Huntley, IL
Mfr: Edge Technologies
Model: FMB-TURBO-5-65
Year: 2012


























