16 Results
Edge Technologies #Minuteman-320SE, magazine bar loader, 9' 4" overall, 1.062" bar capacity, 6' bar length, 10" rack capacity, 2014
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Edge Technologies
Model: MINUTEMAN-320SE
Year: 2014
EDGE MINUTEMAN″20SE MAGAZINE BARFEEDNEW: 2014 :BAR DIAMETER CAPACITY. (3mm-26mm)0.118"-1.062"BAR LENGTH. 6'MINIMUN BAR LENGTH.″9.4"MAXIMUM REMNANT LENGTH. 16.5"MAGAZINE RACK CAPACITY. 10"APPROX. MACHINE WEIGHT. 1300 LBS. OVERALL LENGTH 9'4".
Edge Technologies #Miyano-M-542, magazine bar feed, 1.26" diameter, 12' length, 2021
Machinery Values Inc | Harrison, NJ
Category: Bar Feeders and Loaders
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Edge Technologies
Model: MIYANO-M-542
Year: 2021
EDGE TECH MIYANO 542 MAGAZINE BARFEED NEW: 2021 ** HAS NEVER BEEN USED ** This barfeed has never had any bars installed in it for use. It was purchased to be used on a Miyano BNA-42GTY Direct From OEM Brochure: Power consumption: 2 KWFeed force: adjustable, max. 450 N (101 lbf)Forward feed rate: adjustable 750 mm/sec ...more
JUST ADDED!
Edge Technologies #Patriot-551, Magazine-Type Bar Loader, 2" capacity, 96" Bar length, 16" max Remnant length, 12" Magazine Rack capacity, 1.5 kW, 230 V, 2011
Toolquip Inc | Lebanon, OH
Category: Bar Feeders and Loaders
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Edge Technologies
Model: PATRIOT 551
Year: 2011
Used Magazine type bar loader, used condition. s a bar capacity of 2" and length up to 8'., Bar Capacity, No Prep: 5mm to 44.5mm (.196" to 1.75"), With Prep: 5mm to 51 mm (.196" to 2.000"), Maximum Bar Length: 8', Minimum Bar Length: 39.4", Maximum Remnant Length: 16", Magazine Rack Capacity: 12", Bar Loading ...more
Edge Technologies #Patriot-551, barfeed, 2" bar capacity, 8' bar length, 2019
ACT Machinery | Fullerton, CA
Category: Bar Feeders and Loaders
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2019
, Bar Capacity, 0.196" to 2.000", Maximum Bar Length, 6 feet, Minimum Bar Length, 39.4 inches, Magazine Rack Capacity, 12 inches, Material Straightness,.007"TIR/ft of material (V Blocks, 3 points equidistant), Feed Force (pusher torque), max 450N, adjustable, Foward Feed Rate, 750 inches/min max ...more
Edge Technologies #Patriot-551, barfeed, 2" bar capacity, 8' bar length, 2019
ACT Machinery | Fullerton, CA
Category: Bar Feeders and Loaders
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2019
, Bar Capacity, 0.196" to 2.000", Maximum Bar Length, 6 feet, Minimum Bar Length, 39.4 inches, Magazine Rack Capacity, 12 inches, Feed Force (pusher torque), max 450N, adjustable, Foward Feed Rate, 750 inches/min max, adjustable, Return Feed Rate, 1000 inches/min max, adjustable, Operating Voltage, 230V/60 ...more
Get email updates for newly added Bar Feeders and Loaders
Bar Feeders and Loaders (also known as bar loading systems or bar stock feeders) are devices designed to automatically feed bar stock into lathes or other machining equipment. Commonly used in industries like automotive, aerospace, and manufacturing, these systems improve production efficiency by reducing manual handling and enabling continuous operation. Bar feeders and loaders are essential for high-volume machining, ensuring precision, consistency, and streamlined workflows.
Edge Technologies #Patriot-551, magazine type bar loaders, 2.0079"cap., 12' bar length, 2021
Universal Automatics | Richfield, OH
Category: Bar Feeders and Loaders
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2021
EDGE Patriot 551 Magazine Bar Loader (used) New 2021 - used on a fixed headstock CNC Lathe w/ 2 channel sets, 5mm to 51mm, 12' bars, barely used, like new condition. Great Deal! Capacity 2.0079" Bar Length 12'.
Edge Technologies #Patriot-551, automatic bar loader, 2" capacity, 8' bar length, 2011
Machinery Resources Intl | Simi Valley, CA
Category: Bar Feeders and Loaders
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Edge Technologies
Model: PATRIOT-551
Year: 2010
Edge Technologies Patriot 551 Automatic Bar Loader, Full 6' bar cap, New 2011, Can load up to 8' bars, 45mm channel installed, To the best of our knowledge all listed below are deemed correct., It is the buyer's responsibility to confirmed prior to purchase., per Manufacturer, Bar Capacity:, No Prep: 5mm ...more
Edge Technologies #Patriot-551-37, barfeed, 2" bar, 8' length, 2019
ACT Machinery | Fullerton, CA
Category: Bar Feeders and Loaders
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Edge Technologies
Model: PATRIOT-551-37
Year: 2019
, Bar Capacity, 0.196" to 2.000", Maximum Bar Length, 6 feet, Minimum Bar Length, 39.4 inches, Magazine Rack Capacity, 12 inches, Feed Force (pusher torque), max 450N, adjustable, Foward Feed Rate, 750 inches/min max, adjustable, Return Feed Rate, 1000 inches/min max, adjustable, Operating Voltage, 230V/60 ...more
JUST ADDED!
Edge Technologies #Rebel-80, barfeed, .315" to 3.150" bar diameter, 60" bar length, 30" magazine rack capacity, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-80
Year: 2022
Edge Technologies Rebel 80 Barfeed (subject to buyer verification):Bar diameter capacity 8mm to 80mm (.315” to 3.150”)Maximum bar length 60” (NOT TO EXCEED SPINDLE LENGTH)Magazine rack capacity 30” (60 ½” bars, 30 1.0” bars, 15 2.0” bars)Bar weight 175 lbs. per bar not ...more
Edge Technologies #Rebel-80, servo bar feed, 0.315" diameter, 3" bar, 2020
Clark Machinery Sales LLC | Hunt Valley, MD
Category: Bar Feeders and Loaders
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Edge Technologies
Model: REBEL-80
Year: 2020
2020 EDGE TECHNOLOGIES REBEL 80 SERVO, Capacity. 3.15", Bar Length. 3', Weight. 1100 LBS, RIGHT SPINDLE LINER - EXTENDED TYPE - 2.380" DIAMETER, X-AXIS AXIAL SHIFT, (1) PUSHER LENGTH FOR PART VARIANCE WITH RUBBER ID GRIPPER, EXTENDED V-TRAY TO REACH BACK OF RIGHT-SPINDLE, COOLANT PAN IN V-TRAY AREA FOR EXCESSIVE ...more
Edge Technologies #Rebel-80, bar feed, .315"-3.150" round diameter, 60" bar stick length, 2020
Harris Machine Tools, Inc. | Houston, TX
Category: Bar Feeders and Loaders
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Edge Technologies
Model: REBEL-80
Year: 2020
Edge Technologies #Rebel-102-Servo, Barfeed, 8-102mm bar diameter, 60" L bar, 30" magazine capacity, 20 sec. cycle time, 2020
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-102-SERVO
Year: 2020
Edge Technologies Rebel 102 Servo Automatic Barfeed (subject to buyer verification):Bar diameter capacity: 8 mm to 102 mm (.315” to 4.000”)Maximum bar length: 60” (Not to exceed spindle length)Magazine rack capacity: 30” (762 mm)Bar loading cycle time: 20 secondsPower consumption: 1 kW – ...more
JUST ADDED!
Edge Technologies #Rebel-EcoFeed-V65LE, automatic barfeed, .19"-2.56" bar diameter, 61" bar length, 2021
Premier Equipment Inc | Altamonte Springs, FL
Category: Bar Feeders and Loaders
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Edge Technologies
Model: REBEL-ECOFEED-V65LE
Year: 2021
Edge Technologies Rebel-V65LE Automatic Barfeed – 2021 (subject to buyer verification):Diameter of Bar:.19” – 2.56”Length of Bar: Max 61” (Will depend on Spindle Length)Spindle Height: 36”-51”Weight: 617 lbs (subject to buyer verification):Control.
Edge Technologies FMG #Turbo-5-65, barfeeder, 2.44" bar, 12' 5" bar length, 2019
ACT Machinery | Fullerton, CA
Category: Bar Feeders and Loaders
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Edge Technologies
Model: TURBO-5-65
Year: 2019
, Bar diameter capacity-no bar preparation,.196 to 2.440, Bar diameter capacity-with bar preparation:,.196 to 2.637, Maximum bar length:, 6 feet, Minimum bar length:, 39.400, Maximum remnant length:, 20.800, Magazine rack angle:, adjustable 620, Bar loading cycle time:, 35 seconds for 6-foot bar, Operating voltage: ...more
Edge Technologies #V-65E-CE-A, magazine type bar loader
iGAM | Detroit, MI
Category: Bar Feeders and Loaders
Seller: iGAM
Location: Detroit, MI
Mfr: Edge Technologies
Model: V-65E-CE-A
EDGE TECHNOLOGIES V-65E-CE-A Magazine Type Bar Loader for sale, used condition. Ideal for enhancing manufacturing efficiency. Quality build suitable for various industrial applications. Contact us for more., Spec Sheet, EDGE TECHNOLOGIES V-65E-CE-A, Dimensions. 67X45X47, Weight. 604 LBS.
JUST ADDED!
Edge Technologies Servo Unloader Rebel 80
MRO Exchange | Fairfield, IL
Category: Bar Feeders and Loaders
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Edge Technologies
Used in CNC turning cells sub-spindle lathes, the Edge Technologies Rebel 80 Servo Unloader is a compact, servo-driven part extraction and conveyance system designed to automatically remove finished parts from the sub-spindle of single-spindle CNC lathes. The unit accepts parts ranging from 8 mm to 80 mm (0.315 in. to ...more
