Buy or Sell Your Wide Belt Sander
Recommended Categories for wide belt sander
AI-ranked results for wide belt sander - closest matches first
Rotochopper #MC256, Horizontal Grinder, 3126B 300 Hp CAT Engine, dust control, 2004
Carolina Machinery Sales | Monroe, NC
Category: Wood Grinders and Hogs
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Rotochopper
Model: MC256
Year: 2004
Rotochopper MC256, 3126B 300 Hp CAT Engine, Dust Control, 60 Teeth Roto902 8 row rotor 3/4 x 2 1/4 bolts, 3 button remote-Elec Sol Model EL24VRT, Drive Belt BL10/5V1600, Square D buttons on 3 button box, 24 Volt System, Radiator PreCleaner, CAT radiator, CAT Alternator 9X7803, Turbo II 68-6 intake S/N 87384, DT motors ...more
3" wide x 1.9' long, Arrowhead #S-Curve, Conveyor, Plastic Belt, 0.5 HP, casters, unused
Aaron Equipment Co | Schaumburg, IL
Category: Table Top Conveyors
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Arrowhead
Model: S-CURVE
used- arrowhead s" curve table top chain conveyor. approximately 3" wide plastic belt. approximately 21" long infeed into a 90 degree turn into a 9" long section into a 90 degree turn into a 21" long discharge end. currently 45" from belt to floor. mounted on adjustable carbon steel legs with casters. carbon steel ...more
Ashbrook Winklepress Belt Press, 86.6", electrical panel, catwalks, 200 GPM
Machinery & Equipment Co | Brisbane, CA
Category: Belt Filters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ashbrook
2.2 Meter Mobile Ashbrook Winklepress. Discharge Conveyors. Mobile, turn-key dewatering system. Belt Press, water sump, electric panel, and catwalks are mounted to the trailer which is included with the sale of the unit. Unit ran on average of 180 GPM with a maximum of 200 GPM., Basis: As Is, Where Is, Belt Width: 7.2 ...more
Timesavers #252-301C, 2" Head Belt Grinder Sander, S/N 25519, 2012
HGR24 | Euclid, OH
Category: Belt Grinders
Seller: HGR24
Location: Euclid, OH
Mfr: Timesavers
Model: 252-301C
Year: 2012
Inventory No. 1223-094-0003 Manufacturer Timesaver Model No. 252-301C Name 2 Head Belt Grinder Sander Arrival Date 02-27-2024 Dimensions L x W x H (inches) Unavailable Capacity 52" Weight (lb.) 1 Category Finishing Condition Used, tested Available Quantity 1 Serial No. 25519 Make Year 2012.
11" wide x 12' long, Stainless Steel portable incline sanitary belt conveyor
JM Industrial LLC | Millwood, WV
Category: Belt Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 11"wide X 12'L Stainless Steel Incline Portable Sanitary Belt Conveyor, All stainless steel conveyor frame and adjustable incline stand, Sliding conveyor bed design with 2.5" side guides, Height of discharge: adjustable from 49" to 59", Right-angle drop chute, 1/2 HP underside-mounted drive ...more
Holytek #252PRC, 3-head knife planer / sander, PLC Control, 2011
Ex-Factory | Charlotte, NC
Category: Woodworking Planers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holytek
Model: 252PRC
Year: 2011
HOLYTEK - 252 PRC Series 200: (3) Heads Planer Sander3-Head, 1,300 mm (52") Width cap.; (1) Knife Planer head followed by: (1) Rubberized Drum, (1) Combination Drum/Platen. -- 5 mm - 125 mm (0.196" - 5") Motorized opening with: PLC Control; keypad entry; LED readout for part thickness. -- 1st Head. 150 mm (6") Dia. ...more
37" x 60" Powermatic #RB-37, 1-head abrasive belt, 15 HP, 15-30 FPM, 4" diameter Contact roll, 2" W polishing platen, 1998
Ex-Factory | Charlotte, NC
Category: Belt Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Powermatic
Model: RB-37
Year: 1998
POWERMATIC - RB-37,.Single Head Wide Belt Sander1-Head, 36" width cap., combination sanding head. -- Includes: 4" Dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size: 37" x 60"; with air tensioning, air jet abrasive belt tracking. -- 1 HP Feed drive; variable ...more
2" x 48" Burr King #X400, belt grinder, 8000 FPM, 1 HP, 4" throat clearance, 2" x 6" x 1/4" planten
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Belt Grinders
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Burr King
Model: X400
(NEW) BURR KING BELT GRINDER, MODEL: X400, FACTORY, Cast Aluminum Construction, Bench or Pedestal Mounted, Abrasive Belt Size: 2" x 48", Abrasive Belt Speed: 8000 SFPM, Throat Clearance: 4", Contact Wheel Dimensions: 7" x 1-1/2", Contact Wheel Hardness: 55 Durometer, Steel Backup Platen: 2" x 6" x 1/4", Base Area: 10" ...more
Zalkin #CA8360NG, Stainless Steel, 8 head rotary chuck capper and feeder, rated from 24-240 containers per minute
Frain Industries | Carol Stream, IL
Category: Neck Banders and Cappers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Zalkin
Model: CA8360NG
Zalkin, stainless steel, 8 head rotary chuck capper and feeder. Rated from 24 to 240 containers per minute – depending on materials, application and machine configuration. 28" diameter bowl sorter and feeder, 3½" wide plastic delrin belt conveyor, worm screw to star wheel in feed, (8) head ...more
12" Quickwood CD2-300, profile moulding sander, 4-head bush, 4" height capacity, 3-sided sanding and denibbing, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quickwood
Year: 2026
QUICKWOOD CD2-300 Moulding & Profile Sander or Denibber;4-Head Brush Loading Sander, 12" width and 4" height cap., for 3-sided sanding & denibbing. Head Configuration: -- (2) "BH300" Overhead rotating abrasive/brush heads, both arbors a combination of abrasive and brush loadings, 12" long arbors, 12" max. dia. ...more
Oakley Edge Sander
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Oakley
Model: EDGE SANDER
Oakley Edge Sander.
Scandia #725, automatic, expanded turret type over wrapping machine, 500200 CPM, AB PLC & AB Panelview 550 HMI
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Scandia
Model: 725
Scandia, Model 725, automatic, expanded turret type over wrapping machine. Rated from 50 to 200 CPM – depending on materials, application and machine configuration. Package size range: 1½" " to 3¾" in Length; 3" to 7½" in Width; 1" to 2¼" in Height. ...more
48" width x 48" H x 240" L Thermation Belt Oven, gas, 500°F
W H Kay Co, The | Cleveland, OH
Category: Continuous Type Ovens
Seller: W H Kay Co, The
Location: Cleveland, OH
Mfr: Thermation
Recirculating Belt Oven complete with 5 H.P. Recirculating Fan, Maxon Burner System, Heavy Duty Rubber Belt, Powered Exhaust Fan, and Vaiable Speed Belt Drive., Side Mounted Control Panel complete with Watlow Digital Temperature Controller, Digital High Limit, and Honeywell Flame Safety System.
12" wide x 23.4' long, Stainless Steel 2 tier table top conveyor with variable speed controls
Frain Industries | Carol Stream, IL
Category: Table Top Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Stainless steel, two tier, pack off conveyor. (1) 12" wide x 280" long belt with 2" high cleats on 16" centers and an infeed and discharge height of 31" to 36" and (1) 12" wide x 192" long belt with an infeed and discharge height of 39" to 44". Both belts independently ...more
Trio Pac Inc., 48" wide x 92" long, Stainless Steel bi-directional offline accumulation table, mounted on 4 leg Stainless Steel frame
Frain Industries | Carol Stream, IL
Category: Packaging Unscramblers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Trio Pac
Trio Pac Inc, 48" wide x 92" long, stainless steel bidirectional offline accumulation table with number of containers per hour – depending on materials and application. (2) 24" wide x 92" long belts with variable speed controls, adjustable guide rails and 33" to 38" feed and ...more
Cat 980K, Wheel Loader, 11000 hours, S/N: W7K00612, 2012
Carter Machinery Co. Inc. - Machinery | Salem, VA
Category: Wheel Loaders
Seller: Carter Machinery Co. Inc. - Machinery
Location: Richmond, VA
Mfr: Caterpillar
Model: 980K
Year: 2012
980K WHEEL LOADER, AXLES, OPEN/OPEN, ED, AOC RDY, COLD START PACKAGE (120V), COOLING, HIGH AMBIENT, CUTTING EDGE, BOLT-ON, HYDRAULICS, 2V, Online Owner's Manual, PKG, AGGREGATE LOADER 7.5 CYD, RADIO, AM/FM CD/MP3 PLAYER, RADIO, CB (READY), SEAT BELT, 3" WIDE, TIRES, 29.5R25 * XHA2 MX L3, TRANSMISSION & ...more
8" x 24" Cincinnati, horizontal surface grinder, 12" under wheel, 10" x 1" grinding wheel
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
SERIAL #2S2B5E-9, CAPACITY. 8" X 24", MAXIMUM UNDER WHEEL. 12", HYDRAULIC TABLE TRAVEL, AUTOMATIC CROSS TRAVEL, POWER SPINDLE ELEVATION, GRINDING WHEEL. 10" DIAMETER X 1" WIDE, COOLANT, 3 HORSEPOWER MAIN MOTOR.
53" X 6-11/16" EMC #Mercury-1350-WRK, 3-Hd. Top Knife Planer/Sander, 103" x 54" belt, 5-1/2" knife diameter, 7" roll diameter, 2025, new
Ex-Factory | Charlotte, NC
Category: Woodworking Planers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Emc
Model: MERCURY-1350-WRK
Year: 2026
EMC MERCURY 1350 3WRK Abrasive Planer / Wide Belt Sander with (3) Heads; Planer Head, Contact Roller, and Combination Head.Useful working width 1,350 mm (53"). Working thickness min./max. 3 - 170 mm (1/8" - 6-11/16"). The machines uses abrasive belts 2,620 x 1,370 mm (103" x 54") for longer life of the sanding ...more
15" wide x 21.6' long, LeMatic, Stainless Steel, table top belt accumulation conveyor
Frain Industries | Carol Stream, IL
Category: Table Top Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Lematic
LeMatic, stainless steel, table top belt accumulation conveyor. (1) 15" wide x 258" long Intralox belt through center and (2) 9" wide x 180" long accumulation belts. Mounted on a stainless steel base frame with height adjustable legs for an infeed / discharge range of 34" to 38"., OAD: ...more
PFM #Falcon, 2-up, automatic, servo driven, horizontal flow wrapper, PLC controls w/touch screen HMI
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pfm
Model: FALCON
Pfm, Model Falcon, 2-up, automatic, servo driven, horizontal flow wrapper. Product size range: 1.6" to 18" in Length; 3/8" to 9" in Width; up to 3.5" in Height standard. 12" wide x 78" long slip torque infeed conveyor, 11¾" wide x 60" long three section smart belt ...more
OCP #3512E(200X300), Overband Separator, 47.2" width Product Belt, 78.7" width Overband Belt, 90.2" Suspension Centers, 94" Lifting Centers, 5.5 kW, 400 V
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: OCP 3512E
Overband, self-cleaning magnet for many baling wire applications, s extended length conveyor, wrap around guarding, unique shaft protection system and extended belt width., Overall Dimensions (Nominal):, • Length (overall inc. flights): 3391 mm, • Width (overall): 2726 mm, • Height: 1491 mm, • Belt ...more
Cat TL1255D, Telehandler, 3032 hours, S/N: ML700470, 2016
Boyd Cat Company | Parkersburg, WV
Category: Telehandlers
Seller: Boyd Cat Company
Location: Evansville, IN
Mfr: Caterpillar
Model: TL1255D
Year: 2016
AXLE, STANDARD, BELT, SEAT, 3", Cab - Enclosed, CARRIAGE, SIDE TILT/ROTATE 72", CLIMATE PACK, STANDARD, COUPLER, MANUAL, IT, ENVIRONMENTAL CONTROL,AIR CON, FENDERS, SET OF FOUR, FORK, PALLET 2.36" X 5" X 48", FREIGHT SHIP-TO EXCEEDS RADIUS, HEATER, ENGINE BLOCK, 110V, INSTRUCTIONS, ANSI, LANE 2 ORDER, LEVER, MANUAL ...more
6" x 48" Kalamazoo #S6MV, 6" x10" table, 3500 SFPM, 3 HP, dust collector & stand, #29785
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Belt Grinders
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Kalamazoo
Model: S6MV
(NEW) KALAMAZOO BELT SANDER, MODEL: S6MV, FACTORY, Variable Position, Cast Iron Frame, Direct Drive (Coupling), Belt Size: 6" x 48", Cast Iron Table Size: 6" x 10" w/ 1/2" x 1/8" Slot, Belt Speed: 3500 SFPM, 3 HP Motor, 3450 RPM 230/460/3 (Please state voltage required), Vacuum Dust Collector, Quick-Belt Release, Full ...more
12" Northtech #NT-MBS12-2T1R10L, 4-Head Lineal Brush Sander, 1/4"-6" thickness, 30" min. Work length, 1.5/1/.25 HP, 230/460 V, 2026
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Northtech
Model: NT-MBS12-2T1R10L
Year: 2026
NORTHTECH Four (4) Head Lineal Brush Sander: Sanding Head configuration: 2 Top + 1 Opposing Right + 1 Opposing Left Working width up to 12" Working thickness range: 1/4" - 6" Minimum working length: 30" (2) Top 1.5 HP Sanding heads RPM are inverter controlled (2) 1 HP Opposing side sanding heads RPM are ...more
Timesavers #6019-1, 18" Wood Polishing Belt Grinder, 520 Hours, 10 HP
Bass Machinery LLC | Toledo, OH
Category: Wood Grinders and Hogs
Seller: Bass Machinery LLC
Location: Toledo, OH
Mfr: Timesavers
Model: 6019-1
Year: 1990
18" TIMESAVERS Model 6019-1 Wood Polishing Belt Grinder, AGE: 1990, Grinding Belt Width: 18", Feed Belt Width: 19", Hour Meter: 520 Hours, Adjustable Belt Polishing Pad, Dual Belt Lower Pressure Rolls, Motor Amp Meter, Manual Bed Height Adjustment, Variable Feed Belt Speed, Electrical Drawing, Automatic Grinding Belt ...more
Belcor #505/252TB, semi-automatic case erector packer & uniform, top & bottom case taper, 5-25 cases/minute, mounted on 4 leg frame with casters
Frain Industries | Carol Stream, IL
Category: Carton Sealer
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Belcor
Model: 505/252TB
Belcor, Model 505S / 252, Semi-automatic case erector packer and uniform, top and bottom case taper. Case size range: 8" to 16" in Length; 5" to 15" in Width; 3½" to 16" in Height. Belcor side snap flap folders, 48" long x 7" wide side case transfer belts, top and bottom ...more
Lissmac #SMD-123-RE, deburring & edge rounding machine, 37.4" width, 38.2" x 74.8" belt, LNS Hydroexpress 320 Barfeeder, 2021
Machinery Resources Intl | Simi Valley, CA
Category: Deburring Machines
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Lissmac
Model: SMD-123-RE
Year: 2021
LISSMAC SMD 123 DEBURRING AND EDGE ROUNDING MACHINE, NEW: 2021, MAX. WORKING WIDTH: 37.40, SANDING BELT WIDTH: 38.20", SANDING BELT LENGTH: 74.8", NUMBER OF HEADS: 2 (1 SANDING AND 1 BRUSHING), MAX. MATERIAL THICKNESS: 0.04 - 1.97, VARIABLE FEED RATE: 0.5 15.72 IPM, ADJUSTMENT OF MATERIAL THICKNESS: ELECTRIC ...more
REI, high intensity magnetic roll separator, 48" wide belt/working area, 16" neo drum magnet diameter
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
48" (1200mm) Wide Belt / Working Area, 16" (400mm) Diameter Neo Drum Magnet,.75kW Gear Motor w/ Frequency Drive, 3/60/460 Volt Electric Motor, 24v DC Controls.
50" wide x 6.5' long, Mettler #Pwrd-Fence, Stainless Steel table top conveyor, Intralox belt, .75 HP drive
Frain Industries | Carol Stream, IL
Category: Table Top Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Mettler
Model: PWRD-FENCE
Mettler Toledo, Model PWRD FENCE. Stainless steel, table top conveyor. a 50" wide x 77" long Intralox belt powered by a.75 Hp drive and mounted on (4) leveling legs with an infeed / discharge range of 31" to 39".
Arrowhead Conveyor, Bottle Combiner Conveyor, 1.5/0.75 HP, (5) 4-1/2" belts, (1) 7-1/2" belt, 13" H Clearance above belt
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Arrowhead Conveyor
Arrowhead Conveyor Corporation Bottle Conveyor. Belt width: (5) 4-1/2 in. belts, (1) 7-1/2 in. belt. Maximum aperture/clearance above belt: 4-1/2 in. W x 1 ft. 1 in. H. Sew Eurodrive Motor, 1-1/2 hp, 455/2275 rpm, 230/460 V, 4.75/2.32 amps, 60 Hz, 3 phase. Sew Eurodrive Speed Reducer, ratio: 10.50, input/output rpm: ...more
52" Timesavers #3321-45-86, Widebelt/Polisher, 2-Head, 15-45 FPM, 3850 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 3321-45-86
Timesavers Model 3321-45-86 Standard Two Head 52" Cross-Belt Polisher : Crossbelt abrasive belt size: 6" x 208" Chevron belt size: 6" x 185" Widebelt Abrasive belt size: 52" x 103" Main motors: 25, 30HP Maximum width stock: 51" Minimum part length with vacuum bed: 6" Maximum thickness opening: 6" Infeed loading area: ...more
6" x 48" Kalamazoo #S612V, belt grinder, 2800 SFPM, 3 HP
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Belt Grinders
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Kalamazoo
Model: S612V
(NEW) KALAMAZOO COMBINATION SANDER, MODEL: S612V, FACTORY, Belt: 6" x 48", Belt Speed: 2800 SFPM, Work Table, Belt Machine: Cast-Iron 6" x 10" With 1/2" x 1/8" Slot, Disc: 12" Solid Aluminum Disc, Disc Speed: 2500 SFPM, Work Table, Disc: Cast-Iron 8" x 14", 3 HP Motor 220/440/60/3 (Single Phase Option Available) ...more
Ishida #DACS-GN-S300-46//1P-N-S, checkweigher, 30 kg capacity, 2017
Machinery & Equipment Co | Brisbane, CA
Category: Packaging Checkweighers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ishida
Model: DACS-GN-S300-46//1P-N-S
Year: 2017
Ishida Model DACS-GN-S300-46//1P-N-S checkweigher with 30 kg (66 lb) weighing capacity. Manufactured in October 2017, Serial Number 100306591. Rated weighing accuracy 2.0 g to 3.0 g. Offered with belt conveyor measuring 18" wide x 26" long (less belting). All stainless steel construction. Powered by single phase AC ...more
6" wide, Stainless Steel Z configuration conveyor, #18230
JM Industrial LLC | Millwood, WV
Category: Belt Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Stainless
Used 6"w Stainless Steel Z Configuration Conveyor, All stainless steel construction supported on a 2" square tubing portable frame and formed, stainless sheet, Modular plastic cleated belt on 8.5" spacing with 3" overlapping side guides, Missing 13" length of belt, Installed with drip pan, Loading ...more
Belt Press, 4' discharge H, 25" x 116", Stainless Steel, start/stop control
Machinery & Equipment Co | Brisbane, CA
Category: Dewatering Press
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Press, Belt, stainless steel, 25" X 116" Belt. Stainless Steel Belt Press, belt measures 25" wide X 116" long. Unit s adjustable belt clearance. 4' Discharge height. Includes start/stop controls. Mounted on stainless steel frame with casters. Previously used at meat processing facility to flatten meat into ...more
3" x 79" Saber #BG752A, belt grinder, 5 HP, 220 V. 3 phase, adjustable head position, stand, top grinding surface, new
AR Tools & Machinery Inc | Spokane, WA
Category: Belt Grinders
Seller: AR Tools & Machinery Inc
Location: Spokane Valley, WA
Mfr: Saber
Model: BG752A
Year: 2022
S:, • ADJUSTABLE TOOL REST, • HINGED TOP COVER ALLOWS FULL LENGTH ACCESS TO GRINDING BELT, • TOP MOUNTED WORK TABLE FOR POLISHING, DE-BURRING, AND GRINDING, • ADJUSTABLE BELT TRACKING SYSTEM, • SPARK & DUST CATCHING PROVISION, • MAGNETIC START WITH OVERLOAD RELAY, • LOW OPERATING ...more
10.37" wide x 32" long, Schenck, process belt weighfeeder weigh belt loss in weight feeder, 9" x 20" flanged discharge
JM Industrial LLC | Millwood, WV
Category: Belt Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Schenck
Used Schenck Process Belt Weighfeeder Weigh Belt Loss in Weight Feeder, PAC5 SER# 1100325591-10A-DEA, FILE # Z1W100339, BOM#V714727.B01, Year 2016, Weigh belt is 10.37" wide X 32" long, made of white sanitary vinyl, 3.5" side guides., Stainless steel housing (23.5"W X 48"L) with removable access ...more
11" Cantek #LBS-300-5S, Feed-Thru-Moulding Profile Sander, 26" min length, 3/8" min thickness, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cantek
Model: LBS-300-5S
Year: 2026
CANTEK LBS300-5S 3-Sided Moulding Sander5-Head Brush Sander, 11" width and 4" height cap., for 3-sided sanding of linear profiled material. Head Configuration: -- (2) Sets of Top abrasive brushing heads with variable speed adjustment by inverter, 0.75 HP (0.55 kW) motor each. -- (1) Left side head, adjustable up/down ...more
26.5" x 84" Conveyor
Alan Ross Machinery Corp | Zion, IL
Category: Steel Slat and Chip Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
26" Effective Belt Width, 7' Belt Length, Mounted On Legs, Surge Hopper.
15-3/4" wide x 32.7' long, Grote, Stainless Steel belt conveyor, food grade, right hand
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Grote
Grote, 15¾" wide x 391" long stainless steel belt conveyor. 15¾" wide and 391" long food grade belt has an infeed and discharge range of 32" – 36". a ¾ Hp drive, variable speed control, moveable side mounted bin racks and E-stop. Unit mounted on leveling legs. ...more
Feed hopper with 36" conveyor,, 36", 48", 60" wide belt, 8, 9, 11 yd feed hopper, 3-5 HP
Alan Ross Machinery Corp | Zion, IL
Category: Hoppers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Sizes Available:, 36" Wide Belt (Belt Over Roller) - 8 Yd Feed Hopper (Approx 72" W x 12'6" L), 48" Wide Belt (Belt Over Roller) - 9 Yd Feed Hopper (Approx 72" W x 12'6" L), 60" Wide Belt (Belt Over Roller) - 11 Yd Feed Hopper (Approx 84" W x 12'6" L), Mounted On Standard Legs - Type Varies Depending On ...more
Ohlson #VFFX-35, Stainless Steel inclined cleated conveyor, 10" wide x 69" long belt with 1-1/4" high cleats set on 9" centers. 21" long horizontal run has 7" in feed height
Frain Industries | Carol Stream, IL
Category: Miscellaneous Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ohlson
Model: VFFX-35
Ohlson, Model VFFX-35, stainless steel inclined cleated conveyor with amount of product per hour – depending on materials and application. 10" wide x 69" long belt with 1¼" high cleats set on 9" centers. 21" long horizontal run has 7" in feed height. 48" long incline ...more
Troughed conveyor, 30" wide x 391' long, with cover & cat walk, 30 HP drive
Lenmark Industries | Langley, BC
Category: Miscellaneous Conveyors
Seller: Lenmark Industries
Location: Langley, BC
SKU: 123732, Condition: Used, Additional :, **Loaded on a truck at mine included in price, Includes:, - Catwalk, - Support Stands, - Belt motor: 30 hp.
31" wide x 24' long, S-Shaped Stainless Steel Frame Transfer/Accumulation Conveyor, 2 HP, 32" inlet/outlet H
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Not Specified
S-Shaped Stainless Steel Frame Transfer/Accumulation Conveyor. S/N: 600-016. Height at conveyor inlet/outlet: 32 in. H. Conveyor uses a 24 ft. L x 31 in. W. Intralox plastic link belt. AC Tech Intelligent drive control with touchpad controls and digital display. Baldor Industrial Motor: 2 hp, 1725 rpm, 208-230/460 V ...more
Custom RAP Feeder-Breaker-Scalper
MGB & Company | Caldwell, TX
Category: Belt Feeder Conveyors
Seller: MGB & Company
Location: Kosse, TX
Mfr: Custom
Purpose built single frame feeder, breaker and scalping screen for feeding and processing RAP material for feeding into the recycle collar of a hot mix plant. 14' X 8'-8" hopper feeds onto a 24" feed belt that dumps onto a 36" belt that feeds the 25 HP GenTec Turbo 94 Breaker; the breaker discharges onto a 36" ...more
I.J. White, Double Spiral Freezer Conveyor, 3200 lbs/hr, 2 Towers, 1991
Genemco | Hearne, TX
Category: IQF Tunnel Freezers
Seller: Genemco
Location: Hearne, TX
Mfr: I.j. White
Year: 1991
1991 I.J. White Double Spiral Freezer Conveyor. 32 in. wide x approx 645 ft. L long belt, approx 3 in. clearance between tiers, with take-up assembly job #J-90213 I.J. Last use: 3,200 lbs/hr of rolls and bagels. Product input temperature was 67 degrees F; output temperature was -20 degrees F. White Lower Spiral ...more
12" wide x 10' long, Smalley, Portable Inclined Cleated Belt Conveyor, 1" H x 8" W cleats w/12" spacing, 1/3 HP, 230/460 V.
Cooper Industries Llc | Millwood, WV
Category: Belt Conveyors
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Smalley
Item 1131: 12 “ wide x 10 foot long Smalley Portable, inclined cleated belt conveyor. Currently set for 64″ discharge height. This height is adjustable. Sidewall rails are set for 9 inch inside width., 1 “ high x 8” wide cleats spaced at 12 inch intervals on the belt. Belt is linkage plastic ...more
Tongjia, Continuous Belt Puller, 7" x 56" belt, 4 HP
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Used 7" x 56" Tongjia Puller, 4 HP Manual Adjustment Wheel Jack For Upper Belt Assembly UNIT DOES NOT HAVE AC INVERTER DRIVE SOLD AS-IS Approximate Dimensions: 70" L x 38" W x 69" H.
44" wide x 15' long, Stainless steel, 3-zone, dual belt, dual direction, flexlink tabletop conveyor
Frain Industries | Carol Stream, IL
Category: Table Top Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Stainless steel, 3 zone, dual belt, dual direction, flex link tabletop conveyor. Each zone (2) 21½" wide x 59" long flex link belts, powered by (2) side mounted ½ hp drives for a total of (6) drives and (6) belts. Total tabletop length of 180" with a width of 44" across both belts ...more
Magnapower, Eddy current separator, 40", dual VFD controls
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Motor, • Rotor Motor: 3 kW (3 Phase / 60 Hz / 460V), • Belt Motor: 1.5 kW (3 Phase / 60 Hz / 460V), • Dual VFD Controls: Independent control for rotor and belt speeds, • Feeder Controls: Integrated for precise material flow, Structural & Mechanical s, • High Inductive Force Rotor: ...more
Modular Truck Dump System, (1) 50' Apron Feeder, (1) 25' Apron Feeder, 8' x 100' belt conveyor
Machinery Scene | Toledo, WA
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Modular Truck Dump System
MODULAR TRUCK DUMP WAS UNBOLTED AND DISMATLTED, 2 APRON FEEDERS 50FT+- AND A 25FT+-, 8FT +- WIDE X 100FT LONG +- WIDE BELT CONVEYOR, WITH MOTOR, BELT MAGNET, THE TRUCK DUMP SYSTEM HAS BEEN DISMANTLED AND SHIPPED TO THE STORAGE YARD., THE PRICE INCLUDES LOADING ONTO TRUCKS., WE CAN WORK ON FREIGHT RATES, WE CAN SELL ...more
4" RMT #TN-FAB-4, belt combination machine, 4" x 6' 7" belt, 6 FPM, w/Tube Notching, Coping Grinder, De-Burring Belt Sander, and Bench Grinder
Revolution Machine Tools Inc | North Salt Lake, UT
Category: Belt Grinders
Seller: Revolution Machine Tools Inc
Location: North Salt Lake, UT
Mfr: Rmt
Model: TN-FAB-4
Revolution Machine Tools™ has developed a tube notching pipe grinder with multi sized inter-changeable mandrels. An all-in-one machine to make your production faster and more efficient..
Poly Pack #FH-24-32C, intermittent motion, Stainless Steel, shrink bundling system, 1-30 wraps per minute
Frain Industries | Carol Stream, IL
Category: Bundler Machines - Shrink Bundlers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Poly Pack
Model: FH-24-32C
Poly Pack, Model FH-24-32C, intermittent motion, stainless steel, shrink bundling system. Rated from 1 to 30 wraps per minute – depending on materials, application and pack pattern. Can accomodate pack patterns up to 48" long x 24" wide x 14" high. Bundler: 170" long x 6" wide product in ...more
Texwrap #ST-1607SSR, Horizontal Side Sealer, 100 FPM, casters, 115 V., 2019
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Texwrap
Model: ST-1607SSR
Year: 2019
used- texwrap horizontal side sealer with shrink tunnel, model st-1607ssr. machine is rated for speeds up to 100 ft per minute (film). includes texwrap single chamber heat tunnel, model st-1322. system has a package size range of: 4" - infinite length; 2" - 20" width; up to 10" height. 24" long heat seal knife. 19" ...more
Burkle VBM-1600, Panel Cleaner, Single sided, 16000 mm wide, two brush panel cleaner, 2018
Ex-Factory | Charlotte, NC
Category: Wood Finishing Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Burkle
Model: VBM 1600
Year: 2018
BURKLE - VBM 1688,.Stain Wiping MachineSingle sided machine, 1,600 mm wide; 2-Brush Panel Cleaner (TAMPICO brushes). s: ● Heads can be positioned as needed spacing between the brushes by sliding brackets. ● Brush raising & lowering accomplished by means of handwheel adjustment. ● Brushes are removed ...more
Innotech, Stainless Steel belt washer, 42" wide x 100" long sanitizing conveyor, 2-wash zones
Machinery & Equipment Co | Brisbane, CA
Category: Conveyor and Pass Through Parts Washer
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Innotech
Innotech stainless steel belt washer. Includes 42" wide x 100" long sanitizing conveyor with 2 wash zones, including (6) adjustable spray nozzles. Stainless steel wire belt with 3/8" x 2.5" openings and 8-1/4" height clearance, belt is 44" off ground. Belt is driven by Sterling stainless steel motor, approximately 1 ...more
Larick 410, shape & sand automatic shaper, 6" wide fedd chain, 7.5 HP, 9" diameter sanding wheels, 2026, new
Ex-Factory | Charlotte, NC
Seller: Ex-Factory
Location: Charlotte, NC
Year: 2026
LARICK 410 Shaper / Sander (Feed Through)Designed and Manufactured to give years of dependable service.s: -- The 410 will Shape and Sand a wide variety of workpieces. -- The 410 is Standard with a New easy-to-use Touchscreen that displays RPM and Load for each motor. -- With a 6" Wide Feed Chain and (4) four staggered ...more
Wexxar #505/252TB, uniform, semi-automatic case erector with pack station, top and bottom case taper rated from 5-25 cases per minute
Frain Industries | Carol Stream, IL
Category: Carton Sealer
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Wexxar
Model: 505/252TB
Wexxar / Belcor, Model 505 / 252, Uniform, semi automatic case erector with pack station, top and bottom case taper rated from 5 to 25 cases per minute – depending on materials, application and operator dexterity. Case size range: 8" to 26½" in Length; 6" to 16" in Width; 5" to ...more
7" wide x 10' long, Belt conveyor, includes motor
Machinery Scene | Toledo, WA
Category: Belt Conveyors
Seller: Machinery Scene
Location: Toledo, WA
Includes motor, View attached video of the conveyor running, Contact us for pricing & freight rate.
Cat 430F2 CAB, Backhoe Loader, 3087 hours, S/N: HWE00432, 2016
Hawthorne Cat | San Diego, CA
Category: Backhoe Loaders
Seller: Hawthorne Cat
Location: Lakeside, CA
Mfr: Caterpillar
Model: 430F2 CAB
Year: 2016
AIR CONDITIONER, T4, BATTERY, HEAVY DUTY, BUCKET, HOE, (NONE), BUCKET-MP, 1.4 YD3, PO, CAB, DELUXE, COUNTERWEIGHT, 1015 LBS, CUTTING EDGE, TWO PIECE,WIDE, ENGINE, 86KW, C4.4 ACERT, T4F, FAN, FENDERS, FRONT, HYDRAULICS, MP, 6FCN/8BNK, ST, INSTRUCTIONS, ANSI, LANE 3 ORDER, LINES, COMBINED AUX, E-STICK, NF6U48, Online ...more
12" Vangroenweghe #MBO-300-2KS/2KS Mastersander, top & bottom sander, open front, 4 heads - 2 top & 2 bottom, 2006
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Vangroenweghe
Model: MBO-300-2KS/2KS
Year: 2006
VANGROENWEGHE MBO-300 2KS/2KS Mastersander. Top & Bottom SanderMachine is open on front side, allowing for sanding of frames. The fine sanding platens can be adjusted slightly slanted, particularly useful when sanding frames. Suitable for calibrating & fine sanding.With (4) Heads, 2 top and 2 bottom. 300 mm ...more
Serpa Packaging #2000WA, automatic, continuous motion, Stainless Steel, wrap around hot melt glue cartoner, to 300 cartons/min.
Frain Industries | Carol Stream, IL
Category: Carton Packaging Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Serpa Packaging
Model: 2000WA
Serpa, Model 2000WA, Automatic, continuous motion, stainless steel, wrap around hot melt glue cartoner rated up to 300 cartons per minute – depending on materials and application. single chain unit set on 12" centers with a carton size range of: 1" to 9" in Length; 1 to 3½" in Width; ...more
4" x 60" Kalamazoo #S460V, 4" x 6" table, 3600 SFPM, dust collector, 1 HP, #29784
C.W. Wood Machinery Inc | Cincinnati, OH
Category: Belt Grinders
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Kalamazoo
Model: S460V
(NEW) KALAMAZOO BELT SANDER, MODEL: S460V, FACTORY, "This product has applications in the following industries: Energy, Oil/Natural Gas, Petro/Chemical, Knife Manufacturing, Automotive, Metal foundries, as well as many other Manufacturing and Fabrication environments.", Belt Size: 4" x 60", Belt Speed: 3600 SFPM ...more
10" wide, Nercon, Z-style Stainless Steel incline/cleated conveyor, mounted on heavy duty Stainless Steel frame with caster
Frain Industries | Carol Stream, IL
Category: Belt Feeder Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Nercon
Nercon, Z-Style, stainless steel, inclined cleated conveyor with number of product per hour – depending on materials and application. 10" wide white neopreme belt and side guards with 4" high cleats set on 20" centers. 45" long horizontal floor run has 30" in feed height. 76" long ...more
Loma #IQ4, automatic conveyor through metal detector, 11-3/4" wide x 70" long Intralox belt conveyor, air blast reject and 30" infeed and discharge height, mounted on (4) leg base frame with casters
Frain Industries | Carol Stream, IL
Category: Metal Detectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Loma
Model: IQ4
Loma, Model IQ4, automatic conveyor through metal detector. Number of product per minute – depending on materials and application.Usable aperture: 4½" in Height; 13½" in Width. 72" long x 11¾" wide Intralox belt conveyor, air blast reject and 29" infeed and discharge ...more
Cat 430F2 CAB, Backhoe Loader, 2982 hours, S/N: HWE00400, 2016
Hawthorne Cat | San Diego, CA
Category: Backhoe Loaders
Seller: Hawthorne Cat
Location: Lakeside, CA
Mfr: Caterpillar
Model: 430F2 CAB
Year: 2016
AIR CONDITIONER, T4, BATTERY, HEAVY DUTY, BUCKET, HOE, (NONE), BUCKET-MP, 1.4 YD3, PO, CAB, DELUXE, COUNTERWEIGHT, 1015 LBS, CS3S76, CUTTING EDGE, TWO PIECE,WIDE, ENGINE, 86KW, C4.4 ACERT, T4F, FAN, FENDERS, FRONT, HYDRAULICS, MP, 6FCN/8BNK, ST, INSTRUCTIONS, ANSI, LANE 3 ORDER, LINES, COMBINED AUX, E-STICK, Online ...more
Biesse #Viet-Opera5-RRRF, Widebelt Sander (4 head), 2015
Machinery Associates Inc | Hudson, NH
Category: Belt Sanders
Seller: Machinery Associates Inc
Location: Hudson, NH
Mfr: Biesse
Model: VIET OPERA 5 4.3 RRRF
Year: 2015
Heads are Steel Roller, Rubber Roller, Rubber Roller, Fine Finish. Inverter driven finish head CONSTANT PASS LINE, 1st Working Unit - Drum Unit -, The roller working unit is characterized for the precision and, effectiveness of the work it does., Main motor 22 kW (30HP), Drum - 240mm - Steel, Linear blower cleaning ...more
Grizzly #G-0529, Occillating Belt & Disc Sander, 12" disc, 2012
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Grizzly
Model: G-0529
Year: 2012
Grizzly G 0529 Oscillating Belt and Disc Sander.
Pro Engineering / Manufactorin Slim Line #15030FA, 2 tier Stainless Steel belt & tunnel pasteurizer with 2 zones for pasteuring, warming & cooling, mounted on Stainless Steel frame with leveling legs
Frain Industries | Carol Stream, IL
Category: Pasteurizers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Pro Engineering
Model: 15030FA
Pro Engineering, Model Slim / Line 15030-FA is (2) tier, stainless steel, belt tunnel pasteurizer with (2) zones for pasteurizing, warming and cooling with amount of product per hour – depending on materials and application. (2) zones and has (6) access doors with (3) 16" OD side bottom manways and (2) ...more
Pallet racking, 42" wide, 8' 6" beams, sells as a lot or in sections
Ingalls Process Equipment | Painesville, OH
Category: Racks and Shelving
Seller: Ingalls Process Equipment
Location: Painesville, OH
Model: PALLET RACKING
one(1) lot of used Pallet Racking Able to be split up Uprights: 38 (6) 16' tall x 42" wide Tear Drop (2) 20' tall x 41.5" wide Tear Drop (8) 12'8" tall x 41.5" wide Paltier Racking (slighlty different than Tear Drop) (6) 15'8" tall x 41.5" wide Paltier Racking (5) ...more
4" wide, Carton Transfer Conveyor
Federal Equipment Company | Cleveland, OH
Category: Belt Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Carton
Used 4" Carton transfer conveyor, with motor and controls.
6" wide x 3.11' long, Conveyor
National Machinery Exchange | Newark, NJ
Category: Belt Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
6" wide x 4.2' long, Conveyor
National Machinery Exchange | Newark, NJ
Category: Belt Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
6" wide x 4.5' long, Conveyor
National Machinery Exchange | Newark, NJ
Category: Belt Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
6" wide x 4.6' long, Conveyor
National Machinery Exchange | Newark, NJ
Category: Belt Conveyors
Seller: National Machinery Exchange
Location: Newark, NJ
42" wide x 30' long, Rubber belt conveyor, used
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Incline conveyor, x, Electric Motor..
Aesus #Premier-Shrink, Continuous Motion Full Body Shrink Labeler, up to 150 CPM, 1-1/8" diameter up to 4.9" (198mm) diameter
Aaron Equipment Co | Schaumburg, IL
Category: Labeling Machines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Aesus
Model: PREMIER-SHRINK
unused- aesus continuous motion full body shrink labeler, model premier shrink. capable of up to 150 cpm. size range from 1-1/8" diameter up to 4.9" (198mm) diameter. maximum lay flat 200mm. 5" inside diameter sleeve roll core. 16" outside diameter sleeve reel holder. conveyor belt 4" wide. allen bradley micrologix ...more
Delkor, Stainless Steel 1 to 6 laning conveyor, (2) overhead servo diverting heads
Frain Industries | Carol Stream, IL
Category: Laning Conveyors (Laners)
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
Delkor, stainless steel 1 to 6 laning conveyor. (1) 4"W x 172"L and (2) 10"W x 136"L intralox belts, (2) overhead servo diverting heads and 30" to 35" infeed and discharge range., OAD: 216"L x 64"W x 44"H.
10" x 16" Wellsaw #1000, horizontal metal cutting bandsaw, 1HP, 11' 6" x 1" x .035" blade, S/N 5512,1985
Smith Machinery Co | Ames, IA
Category: Horizontal Band Saws
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Wellsaw
Model: 1000
Year: 1985
Capacity: Rectangular ---------------------- 10" high x 16" wide, Rounds ------------------------------------- 10" di a. 45', Angle --------------------------------------- 9" wide x 10" high, With special guides ------------------------ 24" (w) x 4" (h), 23" (w) x (h) or 21" (w) x 10" (h)., Selective blade speeds ...more
36" wide x 216' long Conveyor Belt, 3-ply
Lenmark Industries | Langley, BC
Category: Belt Conveyors
Seller: Lenmark Industries
Location: Langley, BC
SKU: 151555, Condition: Surplus New, Dimensions: 42.00 (H) x 42.00 (W) x 36.00 (L) inches, Additional :, Overall Thickness: 0.5in., Top Thickness: 6mm, Bottom Thickness: 2mm.
JUST ADDED!
24" wide x 23' long, Trough Belt Conveyor Frame
Machinery Scene | Toledo, WA
Category: Belt Conveyors
Seller: Machinery Scene
Location: Toledo, WA
Frame, 2 pulleys and rolls as viewed in photos, No belt included, Unused/ never used, Self-cleaning tail pulley, Gearbox/speed reducer available.
24" wide x 16' long, Belt Conveyor, w/ Pinch Roll
RT Machine | Hughesville, PA
Category: Belt Conveyors
Seller: RT Machine
Location: Hughesville, PA
24" width x 19" H Lewco Industrial 350 Deg. Electric Belt Conveyor Oven
American Industrial Sales LLC | Berlin, WI
Category: Conveyor Belt Furnaces
Seller: American Industrial Sales LLC
Location: Berlin, WI
Mfr: Lewco
Lewco Industrial 350 Deg. Electric Belt Conveyor Oven, Model: NS-CVT03ED, Variable Speed:.8 to 1.6 fpm, 24” Belt, 19” Work height, Have full owners manual and prints.
Recycling Sorting Line, Math-Ex, 4-person sort line, complete, slider bed belt conveyor, brand new with warranty, 2026, new
Ex-Factory | Charlotte, NC
Category: Recycling Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Math-Ex
Year: 2026
MATH-EX 4-Position (Person) Basic Recycling Sort Line SLIDER BED BELT CONVEYOR: (MODEL 600, STYLE B) FRAME CONSTRUCTION:: --10 GAUGE, BOLT TOGETHER PULLEY DIAMETER --6" DIAMETER CONVEYOR LENGTH --16' 0" ANGLE OF INCLINE: 25 --EFFECTIVE WIDTH: 32" BELT: --BLACK PVC120 COS ENDURA-CLEAT: 2" HIGH @ 48" CENTERS SIDE ...more
Alliance Inc Corp., inverted gripper rinser bottle cleaner, 1000 bottles per minute
Frain Industries | Carol Stream, IL
Category: Washer Parts - Miscellaneous
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Alliance
Alliance Industrial inverted gripper rinser bottle cleaner. Rated up to 1,000 bottles per minute depending on materials, application and machine configuration. Size range: 2" to 9" diameter. a 4½" wide infeed conveyor with an infeed height of 45", 3½" wide side belt gripper ...more
Raymond Mechanical #Wizzer, air separator, 10' diameter x 34" straight side x 12' cone bottom, 200 HP, V-belt drive, #17559
Federal Equipment Company | Cleveland, OH
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Raymond
Model: WIZZER
Used Raymond Mechanical Wizzer Air Separator, approx. 10' diameter x 34" straight side x 12' cone bottom, 200 H.P. motor and V-belt drive.
Ishida #DAC-SGN-RE-060-A2-3/SS-M-B, left to right, Stainless Steel, belt checkweigher, 1-240 items per minute with belt speed up to 120 FPM, mechanical reject arm
Frain Industries | Carol Stream, IL
Category: Packaging Checkweighers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ishida
Model: DAC-SGN-RE-060-A2-3/SS-M-B
Ishida Model DACSGN-RE-060-A2-3/SS-M-B, left to right, stainless steel, belt checkweigher. Rated from 1 to 240 items per minute with belt speed up to 120 feet per minute -depending on materials and application. Weight range of 60 to 6000 grams with minimum graduation rate of 0.5 grams and accuracy of +/- 1gram. Temps: ...more
Hansella #71E, 3 tier cooling belt conveyor, 3/4 HP drive, includes 5 HP blower unit
Frain Industries | Carol Stream, IL
Category: Miscellaneous Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Hansella
Model: 71E
Hansella, Model 71E, three tier cooling belt conveyor. a 180" long x 14" wide top mounted air distribution box with a 14" diameter charge port. Top belt: 258" long x 3½" wide mild steel mesh style belt. Middle belt: 183" long x 23" wide stainless steel mesh style belt. Bottom ...more
36"/42" wide x 115' long, Superior / Terranova Grasshopper conveyor, offered in multiples of 6 conveyors
Machinery & Equipment Co | Brisbane, CA
Category: Conveyors Vibratory Feeders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Superior
Used 46 Grasshopper Conveyors, sold in multiples of six and divided into two lots. Lot 1a consists of 23 units manufactured by Terranova, each measuring 42 inches wide by 100 feet long and Falk 5307 J14 A Quadrive gearboxes with a 14.03:1 ratio. Lot 1b includes 23 units manufactured by Superior in 2012, each measuring ...more
9" wide x 96" long Chevron, Stainless Steel Belt Conveyor
Garland Bros Inc | Suwanee, GA
Category: Belt Conveyors
Seller: Garland Bros Inc
Location: Suwanee, GA
Mfr: Stainless
PLEASE REVIEW: We would ask that potential buyers please view all of the photographs carefully, and understand what you are buying. All questions must be submitted PRIOR to auction close. Your purchase includes a 30 day warranty. We cannot negotiate price or terms after the auction has closed. Payment is expected ...more
American Pulverizer Co. #VSP4, pulverizer, 100 HP, 6 pitch steek belt, 40" wide, cart tipper
Global Equipment International | Chalfont, PA
Category: Pulverizers and Hammermills
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: American
Model: VSP4
Used American Pulverizer for sale, 100HP, 6 Pitch Steel Belt, 40 Wide, Cart Tipper, 56 deep x 49 wide (just short of 50), Pivot point is 58, serial number 7506, Manufacturer AMERICAN PULVERIZAR CO Model VSP4 Condition Used Serial Number 7506 Stock Number 109609.
4.5" wide, Roe Incorporated, Mild Steel Table Top Conveyor, 3/4 HP, 16-1/2" inlet/outlet H, 23" H Clearance above belt
Genemco | Hearne, TX
Category: Table Top Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Roe Incorporated
Roe Incorporated Mild Steel Table Top Conveyor. Maximum aperture/clearance above belt: 4-1/2 W x 23 in. H. Belt width: 4-1/2 in. Height at conveyor inlet/outlet: 16-1/2 in. Leeson Motor, 3/4 hp, 1725 rpm, 208-230/460 V, 2.8/1.4 FLA, 60 Hz, 3 phase. Tigear Gear Drive, 10 ratio, 172.5 rpm (final). Overall dimensions: 23 ...more
Salem #KS-HHH106D, Double-Belt Seamer, dry operation, 4" x 106" belt size, 220/440 V, 3 P, 60 Hz, 2021
Revelation Machinery | Chicago, IL
Category: Glass Equipment - Other and Misc.
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Salem
Model: KS-HHH106D
Year: 2021
Make: Salem, Model: KS-HHH106D, Year: 2021, Machine Location: Indiana, -Operation: Dry, -Belt: Dual Belt, -Belt Size: 4″ x 106″, -Electrical Requirements: 220/440 V, 3 P, 60 Hz, -Weight: 577 lbs.
25-1/2" wide x 10.5' long, Inclined cleated conveyor, food grade, 3/4 HP motor, 51" discharge height
Frain Industries | Carol Stream, IL
Category: Belt Feeder Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Inclined cleated conveyor. a 33" infeed height, 25½" wide food grade conveyor belt with 1½" high x 25½" wide cleats set on 23½" centers. Conveyor has a 125" long incline and a 51" discharge height. Powered by a ¾ hp motor drive and mounted on a (4) ...more
20000 lb. Dallas Industries #20-138, Coil Feed Line, 60" x 72" diameter max. coil size
G-2000 | Toledo, OH
Category: Coil Feed Lines
Seller: G-2000
Location: Toledo, OH
Mfr: Dallas
Model: 20-138
20,000 lb. capacity, 60" x 72" diameter max. coil size, electric motor gear box driven, analog controls, tensioner traveling coil nest, mounted on 2-rail track frames, floor mounted, 60" wide, 14-roll straightener stand, electric motor belt chain driven tensioner, control panel, floor mounted, 2-D400, 60" x 30" strip ...more
Sidel #Gebo-Aidlin, automatic Stainless steel water fall style capacity elevator / feeder & sorter, 50-2000 caps/minute
Frain Industries | Carol Stream, IL
Category: Neck Banders and Cappers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Sidel
Model: GEBO-AIDLIN
Sidel, model Gebo Aidlin, automatic stainless steel water fall style cap elevator / feeder and sorter. Rated from 50 to 2000 caps per minute – depending on materials, application and machine configuration. Capable of handling screw, snap or childproof caps (with proper change parts). a 48" wide x 52" ...more
24" wide x 320' long Conveyor Belt, smooth top, 2 ply
Garland Bros Inc | Suwanee, GA
Category: Belt Conveyors
Seller: Garland Bros Inc
Location: Suwanee, GA
PLEASE REVIEW: We would ask that potential buyers please view the photographs carefully, and understand what you are buying. All questions must be submitted PRIOR to auction close. Your purchase includes a 30 day warranty. We cannot negotiate price or terms after the auction has closed. Payment is expected within 24 ...more
36" Northtech #NT-KL-920-PRR-B & NT-KL-920-PRR-U, knife planer / sander, 3-head, 37" x72" infeed conveyor, 2008
Ex-Factory | Charlotte, NC
Category: Woodworking Planers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Northtech
Model: NT-KL-920-PRR-B
Year: 2008
NORTHTECH - NT-KL-920-PRK- B & NT-KL-920 PRK-U,.Top & Bottom 3-Head Planer Sander3-Head bottom with: Planer, drum and platen; 3-head top with: Planer, drum, and platen 920 mm (36") wide.Capacity: 36" x 5" thickness.Bottom Machine Model: "NT-KL-920 PPR". -- Infeed driven Conveyor: 37" x 72" Long. -- 1st Head: ...more
6000 CFM, NES #2BE-42-2BE-426-2BY3-3, single stage vacuum pump, 250 HP, side belt driven
Global Equipment International | Chalfont, PA
Category: Vacuum Pumps
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Nes
Model: 2BE-42-2BE-426-2BY3-3
NES MODEL 2BE 42 2BE3426-2BY3-3 SINGLE STAGE VACUUM PUMP. DIRECT REPLACEMENT FOR SIEMANS PUMP. 6,000 CFM RATED CAPACITY @ 250 HP, 10" INLET AND OUTLET PORTS, SIDE BELT DRIVEN, S/N 223512, Condition Used Serial Number 223512 Stock Number 904464.022PF.
11-3/4" wide x 5.8' long, Ohlson, Stainless Steel inclined cleated feed conveyor, mounted on 4 leg Stainless Steel frame with leveling legs
Frain Industries | Carol Stream, IL
Category: Belt Feeder Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ohlson
Ohlson, stainless steel inclined cleated feed conveyor with pounds of product per hour – depending on materials and application. 11¾" Wide x 68" Long, Intralox belt, 20" bottom horizontal run, 48" Long incline, 9" high infeed with 1" high cleats set on 9" centers and a ...more
