Buy or Sell Your Wide Belt Sander

Dump Hopper, 3HP Motor, Model PC4835, Previously Used To Sort Used Books, 3Ph/60/208-230/460V.

SERIAL. 5324, MODEL. PS 3X9, NUMBER OF WORK ROLLS. 9, WIDTH. 48", THICKNESS CAPACITY.030" @ 48" WIDE,.050" @ 36" WIDE,.060" @ 24" WIDE, VFD, AUTO LUBE SYSTEM, MANUAL ROLL ADJUST WITH ELECTRONIC INDICATION.

Timesavers Model 2331-23-201 Three Head 37" Planer Sander : Abrasive belt size: 37"x75" Main motors: 30, 20, 20HP Maximum width stock: 36" Minimum part length: 15" Maximum thickness opening: 5" Minimum finished thickness with planer head: 1/2" Infeed loading area: 14" Feed speed: 15-45 FPM Passline height: 33-38" Dust ...more

Used Urania bag sealer, model 5000 P Plus, 120 volt, belt feed, with controls, serial# 0516066750.

Timesavers Model 3331-25-201 Three Head 52" High Production Planer/Sander : Abrasive belt size: 52 x 75" Main motors: 40, 30, 30HP Maximum width stock: 51" Minimum part length roll to roll: 21.5" Maximum thickness opening: 6" Minimum finished thickness with planer head: 1/2" Infeed loading area: 30" Feed speed: 15-45 ...more

The TR UCF209-27 is a four bolt flange mounted ball bearing unit with a 1-11/16 inch bore, designed for shaft support in industrial machinery, conveyors, agricultural equipment, and HVAC systems. The unit consists of a cast iron square flange housing paired with a wide inner ring insert bearing secured to the shaft by ...more

Trans Automation Belt Conveyor, 8" x 12'6" - Stainless steel frame stands at 30" height, sprockets, shafts, and adjustable legs. Unit is less belting and drive., Measurements: 8" wide X 12'6" long, Materials of Construction: Stainless Steel, Basis: FOB.

Used 11.5" W x 72" L Valois Portable Elevator Hopper Conveyor 4" Wide x 1/4" High Cleats In Center Of Belt 0.33 HP Siemens AC Motor (No Drive) 460 Volt Flocked Interior Walls Approximate Dimensions: 92" L x 32" W x 74" H.

Gauge Range:.015" -.125" Line Includes: Holddown (Free standing) Cone Uncoiler 40,000 Lbs. Capacity 16" - 28" I.D. Turnstile 3 Arm 56" Arm x 25,000 lbs Capacity per Arm 4-3/4" C-hook Opening Coil Car 35" Wide 25,000 lbs Capacity Self Contained Hydraulics Mandrel Uncoiler 52" Wide x 16-20" ID pads for 24" 25,000 Lbs. ...more

(NEW) SCOTCHMAN TUBE & PIPE GRINDER/NOTCHER, Grinding Capacity: 3/4" to 3" O.D., Angle Range: Straight = 90 Degrees to 30 Degrees, Speed: 3420 RPM, Belt Speed: 98.4 Feet Per Second, Belt Size: 4" x 78-3/4" Scotchman Tube & Pipe Grinder/Notchers are strong, accurate machines that operate at high speeds. ...more

Timesavers Model 2331-24-201 Three Head 43" Planer Sander : Abrasive belt size: 43"x75" Main motors: 30, 20, 20HP Maximum width stock: 42" Minimum part length: 15" Maximum thickness opening: 5" Minimum finished thickness with planer head: 1/2" Infeed loading area: 14" Feed speed: 15-45 FPM Passline height: 33-38" Dust ...more

Grote, 15¾" wide x 391" long stainless steel belt conveyor. 15¾" wide and 391" long food grade belt has an infeed and discharge range of 32" – 36". a ¾ Hp drive, variable speed control, moveable side mounted bin racks and E-stop. Unit mounted on leveling legs. ...more

Material handling decks and conveyors for a complete post peeling facility. There is no post peeler in this line., - Chop Saw Sorting Line: Post sort belt with (4) 12' kicker zone, 8" slider belt, 76' long, drive, - Log Decks: (4) Post infeed decks with 2-lines of 81x chain, 73' long, drive, - Singulators: ...more

Best Industrial, stainless steel belt conveyor. a 22¾" wide x 96" long belt with a 34" infeed / discharge height. Control box with push button start stop and variable speed controller., OAD: 97"L x 33"W x 37"H.

used- elf machinery 6 spindle capper, model act 600l. 6 tightening quills; stainless steel construction; 24" gripping belt; 6" belt width opening; adjustable angle cap chute. all quills move independently from center line.

Combi America Model 2EZHS, automatic, case erector, bottom taper packer and top taper rated from 5 to 20 cases per minute – depending on materials, application and operator dexterity. Case size range: 8" to 24" in Length x 6" to 16" in Width x 5" to 18" in Height. easy load, blank ...more

Material :, 0.250" thick x 60" wide, 0.312" thick x 24" wide, Feeder Model: DRFS-860, 8" diameter feed rolls, Pull-thru Straightener Model: PTS-582.

Grinding Capacity 12.7mm to 114mm Grinding Capacity 12.7mm to 114mm Angle Range Straight 90 Degrees to 30 Degrees Belt 6" x 78-3/4" Belt Speed 98.4 Feet Per Second Speed 3,420 RPM Voltage 230V ~ 3 Phase Dimension (LxDxH) 55" x 27" x 45" WEIGHT 600 Lbs. s Extra Spindles Sanding Belts.

Serpa, Model P100, stainless steel, automatic, continuous motion, horizontal, hot melt glue cartoner. Rated from 50 to 250 cartons per minute – depending on materials, application and machine configuration. Carton size range: 1" to 6" in Length; ½" to 4" in Width, 4" to ...more

Norman 250 gallon, 304 stainless steel, high shear, single wall, rectangular shape liquefier. Chamber dimmensions: 48" in Length; 48" in Width; 24" straight wall; 22" sloped cone bottom with 36" total depth. 32" x 34" ID top manway and (1) 2-1/2" ID sanitary, (2) 1-1/2" ID ...more

8 Yard Feed Hopper. 5’ X 14’ Vibrating Screener. With 1" Punch Plate Decking. 480 Volt Electric Drive. 14' Long X 6' Wide Sluice Box. With Hydraulic Riffles. All Mounted On A Tandem Axle Tilt Deck Trailer. Complete With Leveling Jacks. Average Capacity Approx. 100 - 120 Yards Per Hour. Location: ...more

B D Briggs LLC, Model CONV-G1, stainless steel, bi-directional table top belt accumulation conveyor. 6" wide x 160" long delrin plastic product feed conveyor and (2) 24" wide x 154" long bi-directional accumulating belts which feed into the product conveyor. Control panel has external control ...more

used insta-pro model 2000 continuous expeller press-used. 7.2:1 cage-length-to-cage-diameter ratio, a vertical screw feed. designed for mechanical oil extraction from oil seeds such as soybeans, canola, and sunflower seeds. this unit includes a belt-driven drive.

KALLFASS AUTOMATIC SIDE SEAL SHRINK WRAP SYSTERM, MODEL UNIVERSA 800, SERIAL NUMBER 09.20.1638, EASY TOUCH PANEL SCREEN, PIN PERF. ROLLERS, SEAL BAR 33"W, MAX. PKG. HEIGHT 12"X INFINITE LENGTH, INFEED BELT SPEED UP TO 115 FEET PER MINUTE, PACKAGE SPEEDS UP TO 35 CYCLES PER MINUTE, POWER 208V.

This is a Aloris Brand CA-9 multi-purpose holder that is ideal for left or right hand turning and facing with a tool capacity of 3/8" to 3/4". It has a large 3-3/8" wide opening on one end, then 1-3/4" wide on the opposite end. With it's large design it is excellent for working close to the tailstock, using various ...more

Stainless Steel Incline Dewatering Belt Conveyor with wire mesh food-grade belt, measuring 21" wide X 13'4" long. Includes 50" infeed height, 48" discharge height, side rails and an infeed hopper. Driven by a 1/2 HP, 230/460 V, 3-phase, 60 Hz, 1725 RPM motor thru gearbox with a ratio of 60:1, and a final output of ...more

Nercon, 40" wide, stainless steel wire mesh belt conveyor with an adjustable length range of 108" to 148" long. a 1HP drive and mounted on stainless steel legs with an infeed and discharge range of 38" to 44"., OAD: 150"L x 66"W x 45"H.

used belmer winkle press dewatering belt press vpk 2s | high-capacity sludge dewatering system. belt working width measures 1500 mm (48") x 15500 mm (50 4") long. 2 x 21 spray nozzles. water pressure 6 bar (90 psi), 18 x 188 mm (7.33") dia driving rolls. belt speed 2.61 m/min (85"/min), stainless steel frame. ...more

used- thermo scientific global checkweigher, model versaweigh 300. infeed 10" wide x 12" long with 6" wide belt. weigh station 10" wide x 12" long with 6" wide belt. outfeed 10" wide x 12" long with 7-5/8" wide belt. arm reject. control panel with tcs hmi, (3) motor controllers. serial# 16024391.

BAKER BBR-O Horizontal Band Resaw w/Powered ReturnBaker Single Head Re-Saw with 6" wide x 12" high cap.;: -- 1/4" - 4" Cutting height; 20 HP TEFC saw motor. -- 28" CNC machined dynamically balanced all steel band wheels. Spring blade tensioning system. Feed System: -- Powered infeed belt tilts 0 - 10, variable speed ...more

Forpak, 8 Lane, stainless steel stacker with laner. Rated from 25 to 100 pieces per minute per lane and stack sizes of 3 to 20 pieces per stack – depending on materials, application and machine configuration. a 50" wide x 120" long (5) lane to (8) lane infeed conveyor, 44" wide x 60" long (2) ...more

Wexxar / Belcor, Model 505 / 252 uniform, semi automatic case erector / pack station with top and bottom case taper. Rated from 5 to 25 case per minute – depending on materials, application and operator dexterity. Case size range: 8" to 26½" in Length; 6" to 16" in Width; 5" to ...more

289D3 CTLT4F, 86" BKT, BATTERY,EXTRA HEAVY DUTY, DISC, CERTIFICATION ARR, P65, CONTROL, ISO, PROP, WT, COUNTERWEIGHT,MACHINE,EXTERNAL, DISPLAY, ADVANCED, LCD, CAMERA, DOOR, CAB, POLYCARBONATE, Engine, FAN, COOLING, DEMAND, FILM, ENGINE, ANSI, USA, FILM, RIDE CONTROL, ANSI, FILM, SELF LEVEL, ANSI, FILM,TWO SPEED W/HIGH ...more

43"0-4".

- 3 units available, unused surplus, - 109 square meter filtration area (1,175 square feet), - Model 42 B9 V3, - Frame constructed from mild steel, - 1430 mm rubber lined head and tail pulleys, - 4.2 meter 4-ply transport belt, - Belt drive with TECO Westinghouse motor, - 2.0 meter diameter filtrate receiver, - Nash ...more

Paul Optimizing Crosscut Saw C14 Scan II w/ Paul Wood Scanning System Optimizing Crosscut Saw and Scanner for Cedar, Hemlock, Pine, and Fir Timber Length (Min/Max): 6ft-20ft Timber Thickness (Min/Max): 1"/2-1/2" Min/Max Timber Cross-section: (2"x5/8")/(12"x2-1/2") Min/Max Cut Length: 36"/240" Scanner Working Height: ...more

Carleton Helical Technologies, Model 19X-4B1FXL-3462, ionized air rinser. a 18" long infeed can inverter, 24" long cleaning chamber with air blast and vacuum, filter canister, side belt transfer, 18" long discharge inverter and 7" long side belt discharge conveyor., OAD: 80"L x 33"W x ...more

Arpac, Model 708HBD32, automatic, stainless steel, intermittent motion, shrink bundler and tunnel. Rated from 5 to 30 cycles per minute with number of product – depending on materials, application, pack pattern and machine configuration. Product size range: 1" to 11" in Length; 1" to 32" in ...more

This listing is for a NEW Dayton premium Vbelt, part number 4L290T. This belt is designed for power transmission in industrial and commercial machinery using standard Vbelt drive systems. Dayton Vbelts are commonly used on motors, fans, pumps, and shop equipment where reliable torque transfer and durability are ...more

Stainless Steel Scoring Machine, belt measures approximately 600mm (24") wide X 1200mm (48") long with 150mm X 750mm scoring section. Unit has 39" feed height and 36" discharge height. Mounted on stainless steel frame with casters. Previously used in meat operation., Basis: FOB.

Mereen-Johnson 110-C Equalizer Equalizer Vertical Hopper feeds One Piece per Lug, Trim Motors on LH and RH sides. Single Piece or unsurfaced Glued-up Panels Two 7-1/2 HP 3600 RPM TEFC Standard Frame Arbor Motors Tilting From 0 to 45 Degrees Arbor Motors arranged for 3 phase, 60 Hertz, 460V, 24v DC Controls Voltage. ...more

BMI, stainless steel belt conveyor. a 24" wide x 96" long belt with a 22" to 38" infeed / discharge range. Powered by a ¾ hp drive with a variable speed controller., OAD: 96"L x 40"W x 38"H.

Inventory No. 0823-213-0246 Manufacturer Hytrol Model No. SC Name Belt Conveyor Arrival Date 03-02-2026 Dimensions L x W x H (inches) 126 x 28 x 47 Capacity 20" WIDE Electrical 3/60/230/460 Weight (lb.) 1070 Category Material Handling Condition Used Available Quantity 1 Serial No. 366293 Item (1) 75x24, (1) 89x24, (2) ...more

KNOPP Duplokant-S2/BRT-120 Dual Cross Belt Edge Grinding Machine for Glass German engineered double-belted glass edge grinding machine scaled glass stop, table extension, coolant circulation system, stainless steel water tub. Table extensions can be added to extend 3 ft on either side providing a total working surface ...more

-Tonnage: 500 tons, -Bed Size: 136'' x 84'', -AFCO Feedline: 76’’ x 75,000 lb, -AFCO Washer: 76’’ Wide, -ECI Oiler: 76’’ Wide, Press, -Model: SE4-500-136-84, -Bed Size: 136’’ x 84’’, -Stroke: 12’’, -Speed: 15-60 SPM, -Shut Height: ...more

Stainless steel wire mesh conveyor. a 36" wide x 42" long belt with an infeed of 40" and discharge of 45". Belt powered by a ½ hp drive and mounted on stainless steel frame with casters., OAD: 42"L x 53"W x 56"H.

Loma, Model CW3 60000S, in line, super heavy weight, touch pad controlled checkweigher with ram arm reject and roller track discharge section. Rated up to 54 meters or 177 feet per minute with number of product – depending on materials, application, machine configuration and environment being run in. 304 ...more

CANTEK LBS300-5S 3-Sided Moulding Sander5-Head Brush Sander, 11" width and 4" height cap., for 3-sided sanding of linear profiled material. Head Configuration: -- (2) Sets of Top abrasive brushing heads with variable speed adjustment by inverter, 0.75 HP (0.55 kW) motor each. -- (1) Left side head, adjustable up/down ...more