1 / 10
Click to zoom in
1 / 10
For Sale by Blades Machinery Co Inc
Surplus Record Dealer Since 1991
Location: Elk Grove Village, IL
Contact Mike Olson
Phone Number: 847...> Show Phone Number 847-439-2126
Let the seller know you found their listing on Surplus Record!
Description
Davis Standard 1/4 tubing extrusion line including the following equipment:
A. Davis Standard / Killion model KN-100 1.00 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 39 centerline height. Gearbox is belt driven by a 3 HP D/C motor with SCR control. Unitized temperature control panel has six (6) zones of Eurotherm controllers consisting of three (3) zones for the barrel and three (3) zones for the c-clamp and die. C-clamp is mounted on the discharge. Includes gravity feed hopper. BOM number 05180. 230V/1ph/50-60Hz input, 47 FLA.
B. Nominal diameter electrically heated tubing die.
C. Davis Standard / Killion medical tubing vacuum tank measuring 116 long with an 8 x 8 cross section. Stainless steel construction. Two glass doors. Upstream and downstream adjustment as well as up and down adjustment. Includes vacuum pump with 3 HP D/C motor, water pumps, sizing fixture, and controls. S/N 30176. 230V/1ph/60Hz input.
D. Davis Standard / Killion belt puller having a 2 wide belt with 22 of contact length. Powered by an approximate 1.5 HP D/C motor. Manually actuated top belt. S/N 30174. 230V/3ph/60Hz input, 10 FLA.
A. Davis Standard / Killion model KN-100 1.00 24:1 L/D extruder having a three (3) zone electrically heated, air cooled non-vented barrel at approximately a 39 centerline height. Gearbox is belt driven by a 3 HP D/C motor with SCR control. Unitized temperature control panel has six (6) zones of Eurotherm controllers consisting of three (3) zones for the barrel and three (3) zones for the c-clamp and die. C-clamp is mounted on the discharge. Includes gravity feed hopper. BOM number 05180. 230V/1ph/50-60Hz input, 47 FLA.
B. Nominal diameter electrically heated tubing die.
C. Davis Standard / Killion medical tubing vacuum tank measuring 116 long with an 8 x 8 cross section. Stainless steel construction. Two glass doors. Upstream and downstream adjustment as well as up and down adjustment. Includes vacuum pump with 3 HP D/C motor, water pumps, sizing fixture, and controls. S/N 30176. 230V/1ph/60Hz input.
D. Davis Standard / Killion belt puller having a 2 wide belt with 22 of contact length. Powered by an approximate 1.5 HP D/C motor. Manually actuated top belt. S/N 30174. 230V/3ph/60Hz input, 10 FLA.
Get Your Price from Blades Machinery Co Inc!
Buyers Who Viewed This Listing Also Viewed:
1/4" Brabender extruder, elec.heated, air cooled barrel, 48:1 L/D, 2 HP, 180 V., VFD, controls on frame, #49243
Category: Extruders and Extrusion Lines
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Brabender
Model: 49243
Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.
.47" Steer Engineering #Omicron-12P, Co-Rotating Twin Screw Extruder, Pharmaceutical Grade, Stainless Steel, 300°C max Temp., 900 RPM, 2 HP, 480 V, 2014
Category: Extruders and Extrusion Lines
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Steer Engineering
Model: OMICRON 12P
Year: 2014
Used 12mm 45/1 L/D Steer Engineering co-rotating twin screw extruder with chrome plated steel screws and barrel. Model Omicron 12P, serial #EA00427, new 2014. Driven by a 2 HP, 480 volt/3/60 motor. Includes control panel and motor drive. Maximum screw speed is 900 RPM. Maximum design temperature of 300 degrees ...more
JUST ADDED!
3/4" Akron #M-Pack, extruder, 24:1 L/D, 2 HP AC, melt pump, adjustable centerline, casters, 480 V., 1994
Category: Extruders and Extrusion Lines
Seller: Plastic Machinery Of New York Inc
Location: Yaphank, NY
Mfr: Akron
Model: M-PACK
Year: 1994
3/4 Akron Extruder Model M Pack, 3/4 Akron 24:1 Extruder Model M Pack new 1994, 24:1 L/D 2 Barrel and 2 Die Zones 2 HP AC Motor & Drive.
.79" Theysohn #TSK-TT 020/28D, twin screw extruder, 28:1 L/D ratio, 2000, #18999A
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Theysohn
Model: TSK-TT 020/28D
Year: 2000
Used 20mm Theysohn Co-rotating Twin Screw Extruder, Model TSK-TT 020/28D, 28:1 L/D Ratio, 3.75 KW Main Motor, 1,750 RPM, 2.79:1 Gearbox Ratio, Water Cooled Barrel, 5 Temperature Control Zones, 4 Barrel, One Die, Amp Meters For Each Zone, Amp Meter, RPM Gauge, Vent Section, Strand Die, Comes With Material Feeder, With ...more
0.7" Leistritz #ZSE-18-PH-40D, twin screw pharma extruder system, 40:1 L/D, 600 RPM, 6.3 HP, w/ K-Tron feeders, on wheels, 2005
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Leistritz
Model: ZSE-18-PH-40D
Year: 2005
used leistritz zse 18 ph-40d twin screw extruder system pharma lab scale line with k-tron feeder & pelletizer. (2) co-rotating 18 mm diameter side by side screws, 40:1 l/d ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. driven by a 4.7 kw (6.3hp) -400/230-volt ac drive motor ...more
