Buy or Sell Your Wide Belt Sander
Recommended Categories for wide belt sander
AI-ranked results for wide belt sander - closest matches first
84" width x 240" L LTG, Conveyorized Tempering Oven, natural gas, 800000 BTU/hr., 500 F max, 1-10 psig, 480 V, 2000
Aaron Equipment Co | Schaumburg, IL
Category: Belt Ovens
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Ltg
Year: 2000
used- ltg conveyorized tempering oven. 500 degrees f max temperature; 800,000 btu/hour; natural gas powered; 48" belt width; 20' conveyor; new blower fan. 3/60/480v. built 2000. previously used for steel part tempering at 350 degrees f.
Garvey #BI-Flo, Unscrambler Accumulator, 6" W x 208" L Feed Conveyor
Frain Industries | Carol Stream, IL
Category: Packaging Unscramblers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Garvey
Model: BI-FLO
Garvey, stainless steel, table top belt accumulation conveyor. end loading plate, (1) 6" wide x 208" long product feed conveyor (1) 42" wide x 168" long and (1) 24" wide x 132" long bi-directional accumulating belts which feed into the product conveyor with bump wheel. Mounted on a ...more
E-Pak, overhead belt compression overlid applicator, VFD control
Frain Industries | Carol Stream, IL
Category: Neck Banders and Cappers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: E-Pak
E Pak, 7½" wide x 118" long Delrin belt conveyor with powered 13" wide x 40" long overhead belt compression overlid applicator. Both belts with seperate VFD controls., OAD: 120"L x 26"W x 46"H.
Goldenpack, Band Sealer for bags, 7.5" W x 45" L neoprene belt conveyor, adjustable sealing height, 110 V
Machinery & Equipment Co | Brisbane, CA
Category: Bagging Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Goldenpack
Goldenpack Band Sealer for Bags - s a 7.5" wide x 45" neoprene belt conveyor with an on/off switch, temperature gauge, and adjustable sealing height. Requires 110V power. Missing some belts., Basis: FOB.
7.5" x 12.5' Turbo #6287-8004, Belt Type Chip Conveyor, 3" Moving Belt width, 7.25" High, 100" Belt Flat length, 42" Dump height, 1/4 HP, 480 V, 2000
Machinery Solutions Inc | Lexington, SC
Category: Plant Shop and Chip Conveyors
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Turbo
Model: 6287-8004
Year: 2000
, Overall width. 7-1/2”, Width of moving belt. 3”, Belt length (flat length). 100”, Overall height of 45” length. 7-1/4”, Overall length. 150”, Dump height (approximate). 42”, Estimated weight. 1,250 lbs, Horsepower. 1/4HP, Electrics. 480/3/60.
30000 lb. U.S. Motors Machines, cradle/straightener/feeder, Complete Line, 30" x .38" stock, 72" OD, (7) 4" diameter roll
Rygate, LLC | Clarkston, MI
Category: Coil Feed Lines
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: U.S. Motors
Coil weight capacity: 20,000 Lbs., Coil width capacity: 30", Stock thickness capacity:.150 @ 30" Wide, Stock thickness capacity:.250" @ 24" Wide, Stock thickness capacity:.300" @ 12" Wide, Max stock thickness capacity:.380" x 10" Wide 45,000 Yield), Max stock thickness capacity:.380" x 03" Wide 90,000 Yield), Coil ...more
Ghezzi & Annoni #FA-300-NV, 62" wide fully automatic taper slitter/rewinder, 2020
Global Equipment International | Chalfont, PA
Category: Paper Slitters and Rewinders
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Ghezzi & Annoni
Model: FA-300-NV
Year: 2020
2020 G&A Ghezzi & Annoni Model FA 300 NV Fully Automatic Tape Line including s/n 2861, Slitter & Rewinder s/n 2861, 62" Max. Width, 32" Min. Width, 38" Max Diameter, 3" & 6" Inside Diameter, 2", 2.5", 3", & 4" Roll Size Change Parts. Max. Production Speed 350 m./Min. TO CONVERT ANY KIND OF ...more
16" wide x 2.8' long, Sizing Conveyor, Carbon Steel, includes rubber belt w/2.5 diameter opening, 4-across
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Sizing conveyor, 16" wide x 2'8" long, a rubber belt featuring 2.50" diameter openings spaced 4-across. Mounted on a sturdy mild steel frame, this unit was used for fruit sizing applications., Type: Fruit Sizer, Measurements: 16" Wide X 2'8" Long, Materials of Construction: Carbon Steel, Previous Use: Fruits ...more
4" wide, Minnesota, Squeezer Conveyors, 2 HP, 4" width knuckle type belt
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Minnesota
Minnesota Automation Squeezer Conveyor. Model Leak Detectors, 4 in. W knuckle type belt, baldor motor 1 to 2 hp, 30 rpm-final, 220-440 V, 80 psi. Overall dimensions 12 ft. L x 3 ft. W x 8 ft. H.
18" wide, BMI / Benda MFG, Stainless Steel inlined cleated conveyor, 3/4 HP motor drive with vari-speed, mounted on Stainless Steel multi-leg frame with casters
Frain Industries | Carol Stream, IL
Category: Belt Feeder Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Bmi / Benda Mfg
BMI / Benda MFG, stainless steel, inclined cleated conveyor. 15" infeed height, 18" wide blue conveyor belt with 3" high cleats set on 9¾" centers. Conveyor has 36" long bottom horizontal run, 55" long incline, 24" long top horizontal run with 48" to 53" discharge ...more
Skinetta #ASK450, automatic, intermittent motion, shrink bundler & tunnel, 20-30 cycles per minute
Frain Industries | Carol Stream, IL
Category: Shrink Tunnels
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Skinetta
Model: ASK450
Skinetta, Model ASK 450, automatic, intermittent motion, shrink bundler and tunnel. Rated from 5 to 30 cycles per minute – depending on materials, application, pack pattern and machine configuration. Product size range: 1" to 10" in Length; 1" to 12" in Width; up to 10" in Height. a ...more
12" wide x 9.6' long, 3Master #ALN300/200, Inclined Belt Conveyor, 2' inlet, 8" x 8" outlet
EcReCon Inc. | Pedericktown, NJ
Category: Belt Conveyors
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Master
, used Inclined Belt Conveyor built by 3MASTER. 12" wide x 9'6" lgth. Approx 90" Discharge height. 2' inlet and 8"x8" outlet. NO drive. Model ALN300/200., Spec Sheet, 3MASTER ALN300/200.
2.75" wide x 4' long, TL Systems, Stainless Steel Belt Conveyor, 115 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Tl Systems
TL Systems Stainless Steel Belt Conveyor - Belt measures 2.75" wide x 4' long with stainless steel frame. Includes 115V variable speed drive and on/off controls., Measurements: 2.75"Wide X 4' Long, Materials of Construction: Stainless Steel, Previous Use: Pharmaceutical Packaging, Basis: FOB.
Wrap Genie, Powered Orbital Roofing Trim Wrap Machine
Wrap Genie | Alexandria, VA
Seller: Wrap Genie
Location: Alexandria, VA
Mfr: Wrap Genie
BRAND NEW and MADE IN AMERICA, Horizontal orbital wrap machine for metal roofing trim, 1hp variable speed motor, Available in three- and single-phase voltage, 20" wide tunnel, Uses standard, widely available 12" wide plastic wrap, Optional automatic hold-down (shop air actuated), Powered and unpowered conveyors ...more
Magnapower Eddy Current separator with control panel, 48",VFD controls/feeder controls,new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
1200mm Eccentric, High Inductive Force ECS Rotor, 1200mm Wide Effective Belt Width, 3kW Rotor Motor (3 Phase / 60 Cycle / 460 Volts)., 1.5kW Belt Motor (3 Phase / 60 Cycle / 460 Volts)., VFD controls / feeder controls., Eccentric, high inductive force rotor., Magnetic anti-leakage design increases performance up to ...more
18" wide x 29' long, Titan, Belt Conveyor, 1 HP, 1760 RPM, 230/460 V
Aaron Equipment Co | Schaumburg, IL
Category: Belt Conveyors
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Titan
used- titan conveyors belt conveyor. approximate 348" long x 18" wide belt. driven by a 1hp, 3/60/230/460 volt, 1760rpm motor thru reducer, 40:1 ratio. serial# 2018189.
Over Conveyor Ladder, 46" high clearance, 24" wide steps, #3172-21
Federal Equipment Company | Cleveland, OH
Category: Miscellaneous Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Model: 3172-21
Used Over Conveyor Ladder, 46" high clearance, 24" wide steps.
U.S. Filter, Water Treatment System, Service Flow Rate, 40 Normal, GPM 60 Max GPM
EcReCon Inc. | Pedericktown, NJ
Category: Water Treatment Equipment
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: U.S. Filter
, WATER TREATMENT SYSTEM: Service flow rate, GPM normal 40, GPM max 60. Deionized water treatment system by US FILTER. (2) salt tanks(2) Carbon vessels. (2)Cation/anion vessels 30" dia x 6' T/T. (2) Mixed bed vessels 36" dia x 9' T/T. Also has Ultraviolet treatment. (2) 5000 gallon Poly storage tanks available ...more
NS Maquinas #DM1100-C, deburring machine, 43" x 2" Working capacity
SOMINN Machinery Sales | Dodge Center, MN
Category: Deburring Machines
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Ns Maquinas
Model: DM1100-C
NS MAQUINAS (NEW) MODEL DM 1100 C CROSSBELT, DEBURRING MACHINE, 43" X 2" WORKING CAPACITY, 1 HP CONVEYOR MOTOR, (2) 4 HP SANDING BELT MOTORS, 19"-165"/MIN VARIABLE FEED RATE, 2" X 126" BELT DIMENSIONS, DEBURRS INSIDE AND OUTSIDE CONTOURS OF, STAINLESS STEEL, STEEL AND ALUMINUM PARTS CUT ...more
43" Timesavers #2321-24-06, Segmented Widebelt/Polisher, 2-Head, 5" thick, 15-45 FPM, 3500 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2321-24-06
Timesavers Model 2321-24-06 Two Head 43" Segmented Widebelt/Polisher : Abrasive belt size: 43 x 75" Main motor first head: 25HP Main motor second head: 20HP Maximum width stock: 42" Minimum part size: 6 x 6 with vacuum bed Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45FPM Approximate full ...more
Caterpillar 259D3 C3H2, 1604 hours, S/N: CW925986, 2023
Warren Cat | Amarillo, TX
Category: Compact Track Loaders
Seller: Warren Cat
Location: Tulsa, OK
Mfr: Caterpillar
Model: 259D3 C3H2
Year: 2023
*CONTROL, ISO, PROP, WT, *DISPLAY, ADVANCED, LCD, CAMERA, *FAN, COOLING, DEMAND, *FILM, TWO SPEED, *HYDRAULICS, PERFORMANCE, (H2), *LIGHTS, LED, *QUICK COUPLER, HYDRAULIC, *ROPS, ENCLOSED WITH A/C (C3), *SEAT,AIR SUSPENSION,CLOTH,HEAT, *STANDARD RADIO(12V),BLUETOOTH, BATTERY,HD,DISCONNECT, 850 CCA, CAB PACKAGE, PRO ...more
Hustler sortline with platform, used
Alan Ross Machinery Corp | Zion, IL
Category: Miscellaneous Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Hustler
Approximate Age: 2013, Magnetic Separator, In working condition, Consists of:, - 48" W x 59' L Steel Belt Incline Conveyor, - 48" W x 83' L Flat Belt Conveyor w/ Eriez Magnetic Separator at the end, - 48" W x 48' L Roller Chain Belt, - 17' W x 63' L Sort Platform, - Electric Controls.
Magnapower #ECS600SF Super-Fines Eddy Current, 24", eccentric rotor, new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: ECS-600SF
600mm Eccentric, High Frequency ECS Rotor, 600mm Effective Belt Width, Sorts 5mm minus fractions on many materials (ask about our testing capability)., 3kW Rotor Motor (3 Phase / 60 Cycle / 460 Volts)., 1.5kW Belt Motor (3 Phase / 60 Cycle / 460 Volts)., VFD controls / feeder controls., Eccentric, high inductive force ...more
DoAll #BRM2266, deburring machine, 2"-6" capacity, 2-20 FPM, 1999, #67223
Yoder Machinery Sales | Holland, OH
Category: Deburring Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: BRM2266
Year: 1999
SERIAL. 542-99104, MODEL. BRM2266, YEAR. 1999, CAPACITY. 2" TO 6" DIAMETER, CAPACITY. 2" TO 6" LENGTH, BELT SPEED. 2 TO 20 FPM, PARTS PER HOUR. 200 TO 600, DRIVE MOTOR. 1/4 HP, BELT MOTOR. 1/2 HP, UPPER BELT MOTOR. 1/2 HP.
8" x 6.7' Jorgenson, Belt Type Chip Conveyor, for Makino MC40 horizontal machining center, 34" Belt Flat length, 18" overall width, 42" Dump height, 1/3 HP, 208 V
Machinery Solutions Inc | Lexington, SC
Category: Plant Shop and Chip Conveyors
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Jorgensen
Jorgenson belt type chip conveyor from Makino MC40 HMC, S/N 325182, 1984 Stock# UD45624: Belt width: 8" Belt length (flat portion): 34" Overall width of conveyor: 18" Overall length: 80" Dump height (approximate): 42" Estimated weight: 550 lbs Horsepower: 1/3 HP Electrics: 208/3/60 : Coolant tank 18" wide x 51" long ...more
36" wide x 20' long, Plastic Mesh Belt Conveyor, food grade, 2 HP, 1660 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Plastic Mesh Belt Conveyor, 36" x 20' - S-turn conveyor with food-grade design. Powered by a 2 HP, 230/460V, 1660 RPM variable speed motor. Mounted on a stainless steel frame., HP: 2, Type: S-Turn Conveyor, Measurements: 36" Wide X 20' Long, Materials of Construction: Stainless Steel, Previous Use: Food ...more
Fenn #3P, high speed plain type turkshead, #12324
Machinery International Corp | Woodridge, CT
Category: Wire Turksheads
Seller: Machinery International Corp
Location: Woodridge, CT
Mfr: Fenn
Model: 3P
MACHINE #12324, -MANUFACTURER: FENN MANUFACTURING CO., -MODEL: 3P, -TYPE: HIGH SPEED PLAIN TYPE, -CAPACITY: FENN DOES NOT LIST A CAPACITY FOR THEIR "P", TYPE TURKSHEADS BECAUSE THEY ARE LY USED, FOR SHAPES. CAPACITY LISTED BELOW IS APPROXIMATED, FOR MILD STEEL FOR REFERENCE PURPOSES ONLY., -APPROXIMATE MAX ...more
1071 cfm, 12 psi, Eurus #MB4512, positive displacement blower package, no motor, 4000 RPM @ 68.2 BHP
Cooper Industries Llc | Millwood, WV
Category: Rotary-Positive Blowers
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Eurus
Model: MB4512
ITEM 2901: EURUS MODEL MB4512 PACKAGE POSITIVE DISPLACEMENT BLOWER PACKAGE, RATED AT: 1071 CFM AT 12 PSI AT 4000 RPM AT 68.2 BHP, WITHOUT MOTOR, UNUSED PACKAGE, RIGHT SHAFT BLOWER, BELT GUARD, OUTLET SILENCER, SHOCK ABSORBER. 6, EXPANSION BOLTS, 12, PRICER FOB HAW RIVER, NC………… $ 13,889.00.
24" wide x 9.6' long, Stainless Steel Belt Conveyor, Adjustable height w/ caster feet and 12" x 18" magnet
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Stainless Steel Belt Conveyor. 24 in. W x 9 ft. 6 in. L. Adjustable height with caster feet and 12 in. x 18 in. magnet.
Bielloni #B87, Cantilevered Duplex Slitter Rewinder, 62" Wide, 40" Unwind diameter, 24" Rewind diameter, 2460 FPM, 2015
Global Equipment International | Chalfont, PA
Category: Paper Slitters and Rewinders
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Bielloni
Model: B87
Year: 2015
Used 62" Wide Bielloni B87 Cantilevered Duplex Slitter Rewinder, Shaftless floor pick up unwind, Unwind diameter: 40", Edge guiding, Dancer arm tension control, Razor slitting, Speed: 2460 fpm max mechanical speed, Rewind diameter: 24" max, Rewind: 3" diameter ball lock differential slip shafts, 1" wide segments, Trim ...more
Cincinnati No. 107-4, centerless grinder, 4" Infeed work rest, 16" diameter & 9" diameter wheels capacity, 7.5 HP, 1954
GCH Machinery | Warren, MI
Category: Centerless Grinders
Seller: GCH Machinery
Location: Warren, MI
Mfr: Cincinnati
Year: 1954
Cincinnati #107-4 Centerless Grinder, 16" OD Grinding Wheel, 4" Infeed Workrest W/ Kicker, Attached Electrical, #107-4 CINCINNATI CENTERLESS GRINDER, S/N 1M1H6B-12 YEAR: 1954, STANDARD CATALOG, CAPACITY, Infeed work rest. 0" to 1 1/2 dia., Thru feed work rest. 0" to 1 1/2 dia., (Work rests not included as standard ...more
12" wide x 25' long, Stainless Steel Belt Conveyor, (2) 90 deg. Turns, 1 HP, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel belt conveyor, belt measures 12" wide x approximately 25' linear feet (20' of straight run and (2) 90 degree turns. Belt driven by Nord 1 HP, 230/460 V motor. Includes stainless steel frame with guide rails. Previously moving boxes of nasal spray., HP: 1, Type: 90 Degree Turn, Measurements: 12" ...more
Timesavers #3121-13-04, Deburring Machine, 2-Head, 36" Work width, 37" width x 60" L Belt, 0-8" Material thickness, 6" Drum & Brush diameter, 15-45 FPM, 460 V, 2004
Revelation Machinery | Chicago, IL
Category: Deburring Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Timesavers
Model: 3121-13-04
Year: 2004
Make: Timesavers, Model: 3121-13-04, Year: 2004, Machine Location: Minnesota, Working Width: 36”, Belt Width: 37”, Belt Length: 60”, Feed Belt Speeds: 15 – 45 F.P.M., Material Thickness (Pass Line): 0-8”, Heads: (2) Drum & Brush, Drum Diameter: 6”, Brush Diameter: 6” ...more
Pecan processing plant, 15000 lb/hr (bagging line)
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
~ 12W x 7.5L 50# Capacity Bag Sewing Belt, ~ JEM ESP Model JMCG31GVD 115# Capacity Bagging Filling Head with Digital Scale, S/N: 070866, ~ 3.5L x3.5W x 3.5D 50# Capacity Bagging Hopper, ~ 12W x 21L Incline Cleated Belt Conveyor, ~ 24W x 10.5L Cross Inspection Conveyor, ~ 24 W x 11L Inspection Table 1, ~ 24 W x 11L ...more
JUST ADDED!
20" wide x 20' long, Vecoplan, conveyor with magnetic pulley, 3 HP, 230/460 V.
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Vecoplan
Self Cleaning Magnetic Pulley, 230/460V, 3HP, VECOPLAN, LLC Conveyor.
Cat 259D3 C3H2, Skid Steer Loader, 1096 hours, S/N: CW906790, 2020
Ohio Cat Heavy Machinery | Broadview Heights, OH
Category: Skid Steers
Seller: Ohio Cat Heavy Machinery
Location: Youngstown, OH
Mfr: Caterpillar
Model: 259D3 C3H2
Year: 2020
*CONTROL, ISO, PROP, WT, *DISPLAY, ADVANCED, LCD, CAMERA, *FAN, COOLING, DEMAND, *FILM, TWO SPEED, *HYDRAULICS, PERFORMANCE, (H2), *LIGHTS, LED, *QUICK COUPLER, HYDRAULIC, *RADIO, AM/FM, BLUETOOTH, *ROPS, ENCLOSED WITH A/C (C3), *SEAT,AIR SUSPENSION,CLOTH,HEAT, BATTERY,HD,DISCONNECT, 850 CCA, CAB PACKAGE, PRO PLUS ...more
21" wide x 13.5' long, Redoma System UMP 500, conveyor with overband magnet, 1/2 HP, 2011
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Redoma
Year: 2011
3 Phase 230/460V - 1/2 HP.
67" wide x 26.5' long, Dell'Orco & Villani, incline conveyor, 130" high, 10 HP, 1987
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Dell-Orco & Villani
Year: 1987
130” High x 67” Wide x 317” Long, 10Hp, 1987 DELL'ORCO & VILLANI UNASSIGNED.
30" wide x 10.1' long, Stainless Steel conveyor belt, neoprene belt powered by a 5 HP drive
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
Stainless steel, 30" wide x 130" long, conveyor. a 30" wide x 130" long Neoprene belt powered by a 5 hp drive. Mounted on casters and leveling pads with an infeed / discharge height of 36"., OAD: 130"L x 66"W x 44"H.
4' x 5' Denver, Ball Mill, 37' diameter Sheave, rubber lined, 2-pc bull gear
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Denver
Denver Ball Mill, 4' diameter x 5' long, s two piece bull gear, pinion shaft and sole plates, Block grease style pedestal bearings & Sole plates, Gear guard with gear spray nozzles, Pinion shaft belt driven with 5V / 5 Groove, 37' diameter sheave to an ODP electrical motor, Bolt on motor mount and belt ...more
12" wide x 17' long, Hytrol conveyor belt, 1/2 HP drive
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Hytrol
Hytrol, belt conveyor a 12" wide x 204" long belt powered by a ½ hp drive with a 22" infeed / discharge height., OAD: 204"L x 24"W x 41"H.
Cincinnati No. 107-4, centerless grinder, 4" thru-feed work rest, 16" diameter x 4" width grinding wheel, 7.5 HP
GCH Machinery | Warren, MI
Category: Centerless Grinders
Seller: GCH Machinery
Location: Warren, MI
Mfr: Cincinnati
Cincinnati #107-4 Centerless Grinder, 16" OD GW, 4" Thrufeed, Electro-Hyd Infeed, 8576#107-4 CINCINNATI CENTERLESS GRINDER, STANDARD CATALOG, CAPACITY, Infeed workrest. 0 to 1 1/2 dia., Thru feed workrest. 0 to 1 1/2 dia., (Work rests not included as standard equipment), WHEELS (Not supplied), Grinding wheel diameter. ...more
16" wide x 4' long, Slider bed conveyor, 7 FPM end drive, 460 V., 3 phase
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
13" Belt, 460V 3PH, End Drive 7 FPM, UNASSIGNED 00.
Magnapower #OCP3310H, 40" x 76" crossbelt magnetic separator, new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: OCP3310H
42" Maximum Field Width, 68.5" Max Belt Lift & Discharge Distance (Material Dependent), Approximate Maximum Working Gap: 10", 13,000 gauss per 2/cm @ 250mm (5/8"), 7,000 gauss per 2/cm @ 350mm (8"), Approximate Belt Width: 40", Approximate Belt Speed: 4.26ft/s, Magnetic Flux Density- High powered non-deteriorating ...more
43" Timesavers #2321-24-66, Segmented Widebelt/Polisher, 2-Head, 5" thick, 15-45 FPM, 4260 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2321-24-66
Timesavers Model 2321-24-66 Two Head 43" Segmented Widebelt/Polisher : Abrasive belt size: 52 x 103" Main motor first head: 30HP Main motor second head: 25HP Maximum width stock: 51" Minimum part size: 6" x 6" w/vacuum bed Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45FPM Approximate full ...more
Cat 289D3STD2C, Skid Steer Loader, 1044 hours, S/N: JX913668, 2023
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Skid Steers
Seller: Foley Equipment - Heavy Machinery
Location: Call Foley, KS
Mfr: Caterpillar
Model: 289D3STD2C
Year: 2023
;- FOLEY WORK READY -
SHOWN ATTACHMENTS SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN FINAL PRICE, *CONTROL, ISO, PROP, WT, *DISPLAY, ADVANCED, LCD, CAMERA, *FAN, COOLING, DEMAND, *FILM, TWO SPEED, *HYDRAULICS, PERFORMANCE, (H2), *LIGHTS, LED, *QUICK COUPLER, HYDRAULIC, *ROPS, ENCLOSED WITH A/C (C3), *RUBBER ...more
18" x .187" Automatic Feed #5-418, coil straightener, 5 straightening rolls, 10 HP, #54744
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Automatic Feed
Model: 5-418
SERIAL. 3335, MODEL. 5-418, COIL WIDTH. 7" MINIMUM TO 20" MAXIMUM, COIL CAPACITY.060 MIN TO.125 @ 18" WIDE, COIL CAPACITY.060 MIN TO.187 @ 7" WIDE, STRAIGHTENER SPEED. 0 TO 1200 IPM, ENTRY PINCH ROLLS. YES, EXIT PINCH ROLLS. YES, DIAMETER OF PINCH. 5", NUMBER OF STRAIGHTING ROLLS. (5) 2 OVER 3, HYDRAULIC LIFT ...more
30" wide x 70' long, Radial stacker belt conveyor, truss frame
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Radial stacker, measures approximately 30" wide x 70' long, constructed with 31" x 36" truss frame. Conveyor is set up to run hydraulically and includes top mounted drive. Complete with pivot plate, rubber tires and hydraulic cylinder to raise/lower frame. Previously used to feed cold feed bin at concrete batch ...more
8" x 8.2" Unloading Parts Conveyor, 12" loading height, 60" discharge height, 45 deg. Incline, 240 V
Machinery Exchange International | Posen, IL
Category: Steel Slat and Chip Conveyors
Seller: Machinery Exchange International
Location: Posen, IL
Discharge Height: 60" Loading Height: 12" Belt Width: 8" Belt Divider Height: 1" Belt Length: 98" Incline (approx): 45deg Overall Footprint (LxWxH): 80" x 22" x 72" Voltage 240v.
Kaps-All #B, Capper, 4.5" width x 8' L belt, w/ Stainless Steel hopper
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kaps-All
Model: B
Kaps-All capper, model B, includes snap-on cap attachment, serial number 2907. Belt measures 4.50" wide X 8' long complete with with feed systems, model FSRS-4 cap sorter/feeder, serial number 1162, includes small stainless steel hopper. Previously used to place snap-on caps onto spice bottles., Basis: FOB.
Clearing #S4-500-186-108, Blanking Line, 500 ton, 12" stroke, 48" Shut Height, 20" adj, 10-50 SPM, 186" x108" bed
VX Machinery | Sylvania, OH
Category: Blanking Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Clearing
-Tonnage: 500 tons, -Bed Size: 186'' x 108'', -AFCO Feedline: 72’’ x 75,000 lb, -AFCO Washer: 72’’ Wide, -ECI Oiler: 72’’ Wide, Press, -Model: S4-500-186-108, -Stroke: 12’’, -Shut Height: 48’’, -Adjustment: 20’’, -SPM: 10-50 ...more
Fitzpatrick #D6A, compact, on-wall design, 316 Stainless Steel construction, hammer mill, 12" long x 12" wide x 24" deep product hopper, (16) fixed Stainless Steel knife / impact blades
Frain Industries | Carol Stream, IL
Category: Pulverizers and Hammermills
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Fitzpatrick
Model: D6A
Fitzmill, Model D6A, compact, on-wall design, 316 stainless steel construction, hammer mill with production rates per hour – depending on materials and application. 12" long x 12" wide x 24" deep stainless steel product feed hopper 2½" OD stainless steel vari speed metering feed screw ...more
52" Timesavers #2331-45-006, Segmented Widebelt/Polisher, 3-Head, 5" thick, 15-45 FPM, 8950 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2331-45-006
Timesavers Model 2331-45-006 Three Head 52" Segmented Widebelt/Polisher : Abrasive belt size: 52 x 103" Main motor first head: 30HP Main motor second and third heads: 25HP Maximum width stock: 51" Minimum part size: 6 x 6" with Vacuum Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45 FPM ...more
20000 lb. U.S. Machine, HD 30" coil feed line, .150" coil thickness
S & G Press & Machinery Sales | Shelby Township, MI
Category: Coil Feed Lines
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: U.S. Machine
Coil Weight 20000 pounds, Coil Width 30 inches, Coil Thickness.150 inches, Standard, US Machine Heavy Duty Coil Cradle Straightener Combination Servo Feed Coil weight capacity: 20,000 Lbs. Coil width capacity: 30" Stock thickness capacity:.150" @ 30" Wide Stock thickness capacity:.187" @ 24" Wide Stock thickness ...more
Moline #DSM2000, continous, Stainless Steel, powdered, granulated or cinnamon sugar donut coating system
Frain Industries | Carol Stream, IL
Category: Bakery Equipment
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Moline
Model: DSM2000
**PART OF COMPLETE LINE 5H1360A**, Moline Model DSM2000, continous, stainless steel, powdered, granulated or cinnamon sugar rumbler for donut coating system rated from 500 to 2000 dozen donuts per hour – depending on materials and application. Drum : 24" ID; 88" in Length with 1" long x 1/2" ...more
Cat 420-07, Backhoe Loader, 1267 hours, S/N: H8T01307, 2021
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Backhoe Loaders
Seller: Foley Equipment - Heavy Machinery
Location: Kansas City, MO
Mfr: Caterpillar
Model: 420-07
Year: 2021
;- FOLEY WORK READY -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, 420 07A BACKHOE LOADER CFG2, AIR CONDITIONER, T4F, AUTO-UP STABILIZERS, BUCKET-GP, 1.5 CYD, CAB, DELUXE, COLD WEATHER PACKAGE, 120V, COUNTERWEIGHT, 1070 LBS, COUPLER, PG, MAN.D.LOCK, BHL, CUTTING EDGE, TWO PIECE,WIDE ...more
Eriez #Xtreme-28X16, 27.75"W x 15.87"H tunnel metal detector
JM Industrial LLC | Millwood, WV
Category: Metal Detectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Eriez
Model: XTREME-28X16
Used Eriez Xtreme Tunnel Metal Detector - 28 X 16, Aperture of the tunnel is 27.75"W X 15.87"H, Non-metallic belt glide measures 22.75"W X 11.75"H (34" from floor elev.), Formed and welded stainless steel conveyor belt frame assembly (45"W X 119"L), Belt frame only, missing belt, rollers ...more
12" wide x 9' long, Link-Belt shaker conveyor, used
Alan Ross Machinery Corp | Zion, IL
Category: Shaker and Oscillating Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Link-Belt
Model LBL1205 x 10, 674 RPM, 460 V / 60 Hz / 3 Phase, 674 RPM.
Ashbrook #Aquabelt, Gravity Belt Thickener, 1.7m, galvanized frame
Aaron Equipment Co | Schaumburg, IL
Category: Water Treatment Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Ashbrook
Model: AQUABELT
used- ashbrook corporation gravity belt thickener, model aquabelt. approximately 1.7 meter belt. galvanized frame.
garvey, low pressure looping belt accumulation table, vari-speed control
Frain Industries | Carol Stream, IL
Category: Accumulation Tables
Seller: Frain Industries
Location: Carol Stream, IL
Model: GARVEY
Garvey, model GRX, low pressure looping belt accumulation table. Equipeed with a 8¾" wide belt with an approximate run of 260" long powered by a 1 hp drive with variable speed control. Conveyor has a 46" to 49" infeed / discharge range., OAD: 125"L x 41"W x 50"H.
12" wide x 10' long, Link-Belt feeder, used
Alan Ross Machinery Corp | Zion, IL
Category: Shaker and Oscillating Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Link-Belt
-, 674 RPM, 460 V / 60 Hz / 3 Phase, 674 RPM.
16" wide x 10.8' long, Stainless steel inclined belt conveyor, 55" discharge height
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Stainless steel inclined belt conveyor. a 16" wide x 128" long blue belt with an infeed height of 22" and discharge height of 55". Mounted on locking casters., OAD: 130"L x 31"W x 55"H.
43" Timesavers #2321-24-66, Segmented Widebelt/Polisher, 2-Head, 5" thick, 15-45 FPM, 4000 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2321-24-66
Timesavers Model 2321-24-66 Two Head 43" Segmented Widebelt/Polisher : Abrasive belt size: 43 x 75" Main motor first head: 25HP Main motor second head: 20HP Maximum width stock: 42" Minimum part size: 6 x 6 with vacuum bed Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45FPM Approximate full ...more
Adco #12WA-175-SS, cartoner/automatic wraparound carton sleever, all Stainless Steel construction, 2010
Machinery & Equipment Co | Brisbane, CA
Category: Carton Packaging Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Adco
Model: 12WA-175-SS
Year: 2010
Adco Cartoner/Automatic wraparound carton sleever, Cartoner model# 12WA-175-SS, serial# 5162, new in 2010. All stainless steel construction. Includes corrugated feed conveyor measuring 24" wide with (3) plastic chain belt conveyors on 4" spacing, rotary picker with (3) rotary arms including (3) suction cups on each ...more
12" width x 288" L Oven Systems, Inc. #M-22RH, Belt Oven, Chain Belt, 16" width x 1.5" H Opening
Perry Videx LLC | Hainesport, NJ
Category: Belt Ovens
Seller: Perry Videx LLC
Location: Hainesport, NJ
Used 12" Wide x 24' Long Belt Oven, Manufacturer: Oven Systems, Inc., Model: M-22RH, Belt dimensions: 12" wide x 24' long, Opening dimensions: 16" wide x 1.5" high, Material of construction: steel, Belt type: chain belt, Additional information: plate dryer, natural gas fired, includes controls, footprint of ...more
8' -19" Cincinnati Bickford #6E, super service radial drill, #6MT, 72" height under arm, power clamp, power rapid traverse
Excel Machinery | Clinton Township, MI
Category: Radial Drills
Seller: Excel Machinery
Location: Clinton Township, MI
Mfr: Cincinnati
Model: 6E
Cincinnati Bickford 8’ x 19” Super Service Radial Drill, Model: 6E Serial # 6E-860, Capacity: 5/8” – 4”, Arm Length: 8’, Column Diameter: 19”, Height Under Arm: 72”, Spindle Taper: No. 6 MT, Spindle Speeds: 8 – 1000 RPM, Spindle Feeds:.0240 -.125 IPM, Spindle Tapp ...more
3" wide x 10.7' long, PDC #75C-ER, conveyor, 1.5 HP
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Pdc
PDC, Model 75C-ER, S/N 110, 240 volts Single Phase, 1- hp, Conveyor 127 in. L x 3 in. W, 85 in. H x 50 in. W x 127 in. L.
Compositech #4612, belt filter press, Automatic belt steering, Stainless Steel frame Remanufactured
D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Remanufactured belt filter presses, - 2 units available, - Weighted rollers, - Shaft mounted gear motor, - Vacuum pan, - Drain pans, - Automatic belt steering, - EPDM main drainage belt: 95% of new condition, - Large capacity feed box, - Stainless steel frame, - New drive motor, - All new seals, bearings, slide ...more
10" wide, Roach, inclined belt conveyor, 24" base, 56" incline, 46" discharge height
D & D Industries Inc | Monclova, OH
Category: Belt Conveyors
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Roach
ORDER 10, ROACH 10" WIDE BELT CONVEYOR WIDTH 10" BASE 24" INCLINE 56" DISCHARGE HEIGHT 46" OAD 24" W X 76" L X 55" T.
10" wide, Roach, inclined belt conveyor, 24" base, 56" incline, 46" discharge height
D & D Industries Inc | Monclova, OH
Category: Belt Conveyors
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Roach
ORDER 10, ROACH 10" WIDE BELT CONVEYOR WIDTH 10" BASE 24" INCLINE 56" DISCHARGE HEIGHT 46" OAD 24" W X 76" L X 55" T.
10" wide, Roach, inclined belt conveyor, 24" base, 56" incline, 46" discharge height
D & D Industries Inc | Monclova, OH
Category: Belt Conveyors
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Roach
ORDER 10, ROACH 10" WIDE BELT CONVEYOR WIDTH 10" BASE 24" INCLINE 56" DISCHARGE HEIGHT 46" OAD 24" W X 76" L X 55" T.
6" wide x 9.1' long, Stainless Steel belt conveyor, 37"-41" infeed/discharge height
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
Stainless steel belt conveyor. a 6" wide x 118" long belt with a 37" to 41" infeed / discharge height., OAD: 120"L x 21"W x 39"H.
Cat 420-07, Backhoe Loader, 1632 hours, S/N: H8T01305, 2021
Foley Equipment - Heavy Machinery | Wichita, KS
Category: Backhoe Loaders
Seller: Foley Equipment - Heavy Machinery
Location: Call Foley, KS
Mfr: Caterpillar
Model: 420-07
Year: 2021
;- FOLEY WORK READY -
ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE
INCLUDED IN PRICE, 420 07A BACKHOE LOADER CFG2, AIR CONDITIONER, T4F, AUTO-UP STABILIZERS, BUCKET-GP, 1.5 CYD, CAB, DELUXE, COLD WEATHER PACKAGE, 120V, COUNTERWEIGHT, 1070 LBS, COUPLER, PG, MAN.D.LOCK, BHL, CUTTING EDGE, TWO PIECE,WIDE ...more
35" wide x 4' long, Traveling Belt Feeder, 20:1 Ratio Speed Reducer, 1 HP, 208-230/460 V
JM Industrial LLC | Millwood, WV
Category: Belt Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 35" Wide x 4' Long Traveling Belt Feeder, 1 HP Baldor motor, 208-230/460 Volt. Morris Rader shaft mounted speed reducer, 20:1 ratio.
36" Northtech #NT-KL-920-PRR-B & NT-KL-920-PRR-U, knife planer / sander, 3-head, 37" x72" infeed conveyor, 2008
Ex-Factory | Charlotte, NC
Category: Woodworking Planers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Northtech
Model: NT-KL-920-PRR-B
Year: 2008
NORTHTECH - NT-KL-920-PRK- B & NT-KL-920 PRK-U,.Top & Bottom 3-Head Planer Sander3-Head bottom with: Planer, drum and platen; 3-head top with: Planer, drum, and platen 920 mm (36") wide.Capacity: 36" x 5" thickness.Bottom Machine Model: "NT-KL-920 PPR". -- Infeed driven Conveyor: 37" x 72" Long. -- 1st Head: ...more
JUST ADDED!
SSI Shredding Systems Metal Recycling Hammermill
World Equipment & Machine Sales | Stow, OH
Seller: World Equipment & Machine Sales
Location: Dawsonville, GA
Year: 1998
SSI Shredding Systems Model 2400e Shredder, 200 HP, Double Shaft, Refurbished Teeth recently installed, Infeed and Outfeed Belts, Cross Belt Magnet, Exit Belt to Bulk Bag, Torit Cartridge Dust Collector, With Spares.
Jones #BFC, automatic, horizontal, continuous, motion, hot melt cartoner, rated from 50-160 cartons per minute
Frain Industries | Carol Stream, IL
Category: Carton Packaging Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Jones
Model: BFC
Jones, Model BFC, automatic, horizontal, continuous, motion, hot melt glue cartoner. Rated from 50 to 160 cartons per minute – depending on materials and application. Carton range of: 5" to 9" in Length; 1½’ to 3½" in Width; 8" to 12" in Depth. 10" wide x ...more
15-3/4" wide x 11.6' long, Alimec, Stainless Steel inclined belt conveyor, mounted on locking casters
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Alimec
AliMec stainless steel inclined belt conveyor. a 15” wide x 138″ long food grade blue belt with an infeed height of 24″ and discharge height of 69″. Mounted on locking casters., OAD: 138″L x 38″W x 70″H.
Loma #X5-500-Spacesaver, Stainless Steel, left to right, X-ray inspection system, A/B powerflex vari-speed drive
Frain Industries | Carol Stream, IL
Category: Metal Detectors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Loma
Model: X5-500-SPACESAVER
Loma, Model X5 500, Stainless steel, left to right, X-Ray inspection system with number of product per minute – depending on materials, application and machine configuration. 304 stainless steel #4 polish, dry wipe down construction. Total aperture: 8" in Height; 18" in Width; 32" Chamber Length. ...more
12" wide x 22' long, Stainless Steel Conveyor, 1" H flights, 22" spacing
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Not Specified
Stainless Steel Conveyor. 12 in. W x 22 ft. L flighted intralox belt, 1 in. H flights, 22 in. spacing, hydraulic drive.
19-1/2" wide x 12.8' long, Alimec, Stainless Steel belt conveyor, mounted on locking casters
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Alimec
AliMec stainless steel belt conveyor. a 19” wide x 152″ long food grade blue belt with an infeed and discharge range of 34″ to 37″. Mounted on locking casters., OAD: 152″L x 50″W x 35″H.
20000 lb. U.S. Motors Machine, Coil Cradle Straightener, 30" width Capacity, 72" coil outside dimension, reconditioned
S & G Press & Machinery Sales | Shelby Township, MI
Category: Coil Cradles and Straighteners
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: U.S. Motors
Coil Weight 20000 pounds, Coil Width 30 inches, Coil Thickness.150 inches, Standard, US Machine Heavy Duty Coil Cradle Straightener Combination Coil weight capacity: 20,000 Lbs. Coil width capacity: 30" Stock thickness capacity:.150" @ 30" Wide Stock thickness capacity:.187" @ 24" Wide Stock thickness capacity:.300" @ ...more
20" wide x 4' long, Hytrol, Slider Bed Belt Conveyor, 0.5 HP, 208-230-460 V
Cooper Industries Llc | Millwood, WV
Category: Belt Conveyors
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Hytrol
ITEM 1247: 20” WIDE X 48” LONG HYTROL SLIDER BED BELT, CONVEYOR. SN 579887. 0.5 HP 208-230-460-3-60 BALDOR, MOTOR AND GEARREDUCER. WITH SUPPORT LEGS, Price fob, Haw River, NC….
Prism #VARICUT-24, Pelletizing Line, 24mm, 25:1 L/D, 6 zone, TSE-24TC Extruder, 1996
Aaron Equipment Co | Schaumburg, IL
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Prism
Model: VARICUT-24
Year: 1996
used prism pelletizing line. consists of: prism parallel twin screw extruder, model tse 24tc, 24 mm co rotating screws, 25:1 l/d, electrically heated, water cooled barrel, (3) top vents with (2) plugged, 6 barrel zones with on board control panel, 3.7 kw, 230 volt ac motor drive with vfd controller, two hold stand ...more
24" wide x 30' long, Flex-Weigh #DWM-IV, inclined cleated belt conveyor, 4" high cleats, serial# F-33101, #3146-02
Federal Equipment Company | Cleveland, OH
Category: Belt Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Flex-Weigh
Used 30' Flex-Weigh inclined cleated belt conveyor, model DWM-IV, 24" wide x 30' long rubber cleated belt, 4" high cleats, approximately 7' discharge height, serial# F-33101.
51.2" Unisanding #240K+120K, Cross & Longitudinal Brush Denibbing Sander, (2) 51.2" width Brush Heads, 10-60 FPM, 30 HP Total Power, 2005
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Unisanding
Model: 240K+120K
Year: 2005
UNISANDING - 240K + 120K": Cross & Longitudinal Brush Denibbing Sander with: 51.2" (1,300 mm) widthSuitable for: ● Denibbing on solid & moulded items regardless of orientation in any kind of: Wood, MDF, and HDF. ● Ideal for: Deburring a wide range of metal surfaces and parts. ● Sanding strips ...more
24" wide x 12' long, Dorner #2200, Aluminum frame belt conveyor, vari-speed controller
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Dorner
Dorner, Model 2200, aluminum frame belt conveyor. a 24" wide x 144" long belt with a 24" to 36" infeed / discharge range and variable speed controller., OAD: 144"L x 30"W x 30"H.
24" wide x 6.9' long, Gorbel #AE-DT24081-H, cascading belt conveyor, (4) 13' 6"sections, 480 V., new
Perfection Global | Elk Grove Village, IL
Category: Belt Conveyors
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Gorbel
Gorbel AE-DT24081-H, 24" Wide Belt, (4) 13'6" Sections, 81" Total Length, 480V, Some Repairs Needed; Damage Caused in Transit, New—Never Used.
Magnapower Super Fines Eddy current separators, 48", 1200mm eccentric high frequency rotor
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
1200mm Eccentric, High Frequency, High Inductive Force ECS Rotor, 1200mm Wide Effective Belt Width, Fines ECS Intended For Materials 4mm And Smaller, 3kW Rotor Motor (3 Phase / 60 Cycle / 460 Volts)., 1.5kW Belt Motor (3 Phase / 60 Cycle / 460 Volts)., VFD controls / feeder controls., Eccentric, high inductive force ...more
18" wide x 15.1' long, Inclined Stainless Steel conveyor, 15" infeed height, food grade belt, 25" discharge height
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Inclined stainless steel conveyor. a 15" infeed height, 18" wide x 190" long trough style food grade belt, 25" discharge height. Mounted on a (2) leg stainless steel base frame with casters., OAD: 190"L x 32"W x 26"H.
43" Timesavers #2331-24-066, Segmented Widebelt/Polisher, 3-Head, 5" thick, 15-45 FPM, 5250 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2331-24-066
Timesavers Model 2331-24-066 Three Head 43" Segmented Widebelt/Polisher : Abrasive belt size: 43 x 75" Main motor first head: 25HP Main motor second and third heads: 20HP Maximum width stock: 42" Minimum part size: 6 x 6" with Vacuum Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45 FPM ...more
6" wide, Belt conveyor return idler rollers, carbon steel
Cooper Industries Llc | Millwood, WV
Category: Belt Conveyors
Seller: Cooper Industries Llc
Location: Millwood, WV
ITEM 2773: 6” DIAMETER BELT CONVEYOR RETURN IDLER ROLLERS 39” & 45” LONG, ROLLER COUNT & LENGTHS, 21 – 39”, 11 – 45”, 1 – 44”, 1 – 33”, CARBON STEEL, LOT PRICE, FOB HAW RIVER, NC…………. $ 4,000.00.
24" wide x 14' long, Flatbelt Conveyor, 12" pulley diameter
Arlington Machinery | Lake Zurich, IL
Category: Belt Conveyors
Seller: Arlington Machinery
Location: Lake Zurich, IL
Used 14' L x 24" Wide Flatbelt Conveyor 11" High Side Walls 12" Pully Diameter DOES NOT HAVE GEARBOX OR DRIVE, PREVIOSULY DRIVEN BY HYDRAULIC MOTOR Approximate Dimensions: 16' L x 4' W x 2' H.
Brenton #LLP-21, low level, case palletizer, 5-15 cases per minute, (2) belt spacing conveyor, case turning conveyor
Frain Industries | Carol Stream, IL
Category: Palletizers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Brenton
Model: LLP-21
Currie, Model LLP 21, Low level, case palletizer rated from 5 to 10 cases per minute – depending materials, application and pack pattern. Case size range: 6" to 24" in Length; 4" to 24" in Width; 3" to 14" in Height with load size up to 50" long x 50" wide x 72" High ...more
Compositech #4630, belt filter press, 135 sq.ft., 60" belt, 36.5' long, 20 HP total, 300 GPM, Nash vacuum pump
D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Horizontal belt filter press, - 135 square foot filtration area, - 60 in belt, 36.5 ft long, -20 HP total, - Requires 40 GPM at 50 PSI water, - Requires 2 CFM at 100 PSI air, - 300 GPM design capacity, - Gear reducer, 59:1 reduction ratio, Nash vacuum pump:, - 400 RPM, - 150 HP 1,180 RPM and 460V, - 12 inch motor ...more
52" Timesavers #2331-45-066, Segmented Widebelt/Polisher, 3-Head, 5" thick, 15-45 FPM, 5830 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2331-45-066
Timesavers Model 2331-45-066 Three Head 52" Segmented Widebelt/Polisher : Abrasive belt size: 52" x 103" Main motor first head: 30Hp Main motor second and third heads: 25HP Maximum width stock: 51" Minimum part size: 6 x 6" with Vacuum Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45 FPM ...more
Luwa Marumerizer #QJ-700V, Stainless Steel Spheronizer, 700 mm diameter Bowl, 300-700 RPM, Side Product Discharge, On Wheels
Perry Videx LLC | Hainesport, NJ
Category: Spheronizers
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Luwa
Model: QJ-700V
Used Luwa Marumerizer Stainless Steel Spheronizer, Model: QJ-700V, 700 mm dia. bowl, 304 stainless steel cooling jacket, Rotation speed 300-700 rpm, Side product discharge with flush outlet, Belt driven, Mounted on wheels, LUWA QJ-700V.
American Packaging #ALM-Twister, Wrap Around Pressure Sensitive Labeler, 4" width x 60" L pass thru belt conveyor, set up for 9" L x 2.5" H label, 20-22 labels/min., 6" max label height, 220 V
Machinery & Equipment Co | Brisbane, CA
Category: Labeling Machines
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: American Packaging
Model: ALM-TWISTER
American Packaging & Plant Equipment wrap-around pressure sensitive labeler, Model ALM-Twister, Serial number 201100601. Includes 4" wide x 60" long pass-thru belt conveyor. Currently setup for 9 long X 2.5 high label, Adjustable height and width for labels. Rated for approximately 20 to 22 labels per minute. ...more
Tenchi #TP-200, automatic, intermittent motion, 8-station rotary, roll overwrapper rated from 40-120 packages per minute
Frain Industries | Carol Stream, IL
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Tenchi
Model: TP-200
Tenchi TP200, Automatic, intermittent motion, 8-station rotary, roll overwrapper rated from 40 to 120 packages per minute. Rolls: up to 50mm dia x up to 110mm long. Has 5 1/2"W x 29"L infeed conveyor belt, 5 1/2"W x 59"L discharge belt conveyor, dual film rolls, film up to 7"W, hot roll film ...more
31" x 144" Trench screen, 1.5 HP, 208-230/460 V.
Lenmark Industries | Langley, BC
Category: Screens and Sifters
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Trench
SKU: 18502, Condition: Used, Electrical :, Horsepower: 1.5 hp, Voltage: 208-230/460 volts, Dimensions: 48.00 (H) x 20.00 (W) x 148.00 (L) inches, Additional :, Belt Filter Body: 148" L x 48" W x 20" D, Motor Assembly: 48" W x 30" D, Screen: 145" L x 31" W.
