Buy or Sell Your Wide Belt Sander

Heesemann Model LSM 8 Four Head Wide Belt Sander 53" wide capacity 1/8" minimum to 5-1/2" maximum thickness capacity 1st HEAD: Cross sanding unit - CSD segmented pad with chevron belt 2-speed motor - 20/26 HP motor Abrasive belt size - 6" x 189" Sanding belt speed - 39/78 FPS Electronic braking 2nd HEAD: Wide belt ...more

NORTHTECH - NT-920C-200: 2-Head Planer Sander -- 2-Head. 37" width cap.; 1-knife planer head followed by a wide belt sander head. -- 0" - 6" Motorized opening with: PLC control; keypad entry; LED readout for part thickness. -- 1st Head. 6" Dia. helical planer head with: (6) Rows of staggered carbide inserts; each ...more

Rotating Conveyor cleaning brush, motor driven, Niagara 10 Wet Dust Colection System with ducting kit.

BOERE - TKS 900,.2-Head Top Wide Belt Sanding Machine900 mm (36") Working width; : (1) Contact roller, (1) Fine sanding pad. Head Configuration -- 1st Head: Rubber contact roller, spirally grooved, Shore hardness 80, diameter 265 mm (10.4"), driven by 18 kW (25 HP) motor. -- 2nd Head: Sanding pad, electronic-pneumatic ...more

TIMESAVERS 150-1v Wide Belt Sander;1-Head, 50" width cap.; contact roll head with 40 HP motor; 50" x 103" abrasive belt size, air tracking, 2-1/2" max. thickness cap., adjusted by scale; variable feed speed 40 to 100 FPM; incl. in- & outfeed extension. -- Used to have a checkrail edge sanding attachment for ...more

**BRAND NEW**, S8W 8 X 60 INCH VERTICAL WET BELT SANDER S8W 8 x 60 inch vertical wet belt sander has a powerful 7.5HP motor and a belt speed of 3500. This quality machine s will help save time and increase production. The coolant system with this industrial helps keep your metal cool, so the metal properties ...more

SERIAL. 22086 MODEL. 243-1M NEW. 1992 WIDTH OF BELT. 43" WORK HEIGHT UNDER BELT. 8" MAXIMUM CONTACT WHEEL DIAMETER. 9-1/2" IDLER ROLL DIAMETER. 8" INFEED CONVEYOR EXTENSION. 27" BELT SIZE. 43" X 75" CONVEYOR BELT SPEED. 20 TO 60 FPM VARIABLE PASSLINE HEIGHT RANGE. 38" TO 30" CONVEYOR BELT HEIGHT. HANDWHEEL ADJUSTABLE ...more

Make: Cemco, Model: 2000, Year: 2000, Machine Location: New York, Cemco model 2000, 37″ Wide capacity, 20 HP Main drive motor, 36″ Abrasive belt size, Variable speed feed, Manual raise and lower of table, Spring loaded holddown rollers, Load meter, Dust outlet.

This is an Italian made machine., Not sure of the year of manufacture, Serial number 14136, 230v 3 phase., Works great. I used it to sand wood instrument tops, backs, and sides., Machine will sand very thin material., I replaced the feed belt when I purchased the machine, I am not a dealer. Just a woodworker who no ...more

DURAMAC - DUR52-2,.2-Head Wide Belt Sander2-Head Wide Belt Sander with: Drum, combi-head, and brush cleaner. -- Max. working width: 52". -- Max. working thickness: 6". -- 23" Infeed load space. -- 50" Wide rubber conveyor belt size. -- 1st Head: Grooved rubber contact sanding drum; 40 HP, 230 Volt - 3-phase drive ...more

DMC UNISAND K (3) Bottom and (3)Top heads wide belt sander. --, 43" max. width. - Bottom Head sequence : 1st Head Contact roll, approx.18.5 KW motor- 2nd Bottom Head Contact roll, 2rd Bottom head, Combination head with roll and platen, approx.15 KW 2-speed motor, belt speed 118 m/sec. -- Bottom panel brush. -- Top ...more

Timesavers Model 1300 Wide Belt Sander, 43" x 60" Belts, Combination head, 439 Hours.

, Variable belt speed for conveyor.

SERIAL. 12354, MODEL. #300, BELT WIDTH. 6", BELT LENGTH. 18", DISC SIZE. 12", DISC TABLE TILTS. 45 DEGREES, GUIDE ON BELT TILTS. 45 DEGREES, MAIN MOTOR. 1 HP.

MODEL #: N/A, SERIAL #: N/A, 6" x 48" BELT STYLE SANDER, 480/3/60.

Stock #: 114250080, Location: Decatur, GA, Approx. Shipping Weight: Local Pick Up Only, Approx. Shipping Dimensions: 6'1" H 1'8" L 1'10" W(Local Pick Up Only), Belt Size: 2" x 60", Motor HP: 1/2, Electrical: 115V/1PH, Additional Info, The Belt Sander can be demoed upon request, check ...more

SERIAL.8430296, MODEL. #30, BELT WIDTH. 6", BELT LENGTH. 48", DISC SIZE. 12", DISC TABLE. 6-1/2" X 14-1/2", DISC TABLE TILTS. 15 TO 45 DEGREES, GUIDE ON BELT TILTS. 45 DEGREES, BELT SPEED. 2375 RPM, MAIN MOTOR. 1 HP.

JET 6″ x 48″ Industrial Belt Finishing Machine, J-4301A, Inventory # 9926-P, Model: J-4301A, S/N: 14040221, View the JET J-4301A Belt Sander PDF Here, Belt Size: 6″ x 48″, Belt Table Size: 7 3/8″ x 14 3/4″, Belt Table Tilt: 45° Out, 20° In, Table Slots: 5/8″, Motor: ...more

Motor 110 V, 1 PH, 1.5 HP, 1,720 RPM, 12 AMPS, 6" flat belt, 6 x 20.5 long, 12" belt.

MODEL #300, BELT WIDTH. 6", LENGTH OF. 18", DISC SIZE. 12", DISC TABLE TILTS. 45 DEGREES, GUIDE ON BELT TILTS. 45 DEGREES, 1 HORSEPOWER MAIN MOTOR.

SERIAL. 3273, NEW. 1995, MODEL. 37B/84, UNDER DRIVEN ABRASIVE GRINDING BELT, WIDTH OF ABRASIVE BELT. 36", WIDTH OF CONVEYOR BELT. 36", WORK PIECE THICKNESS. 0" TO 6" MAXIMUM, LENGTH OF ABRASIVE BELT. 84", LOADING AREA. 42" X 22", UNLOADING AREA. 42" X 34", CONVEYOR BELT SPEED. 30 TO 90 FPM, DIAMETER OF RUBBER CONVEYOR ...more

Overview, Type:Wide Belt SandersManufacturer:TIMESAVERSModel:LYNX 37MWT-D-60Status:For SaleCountry:United States, 6" Diameter Adjustable Contact Drum, Constant Passline, NEMA 12 Electrical Enclosure, Automatic Conveyor Belt Tracking, Infeed Stop Bar, Dual Infeed & Dual Outfeed Holddown Rolls, Hour Meter ...more

SERIAL. 03H44525MODEL. 52-613FWIDTH OF BELT GRINDER. 6"WORK REST TABLE ON BELT GRINDER. 14-3/4" X 7-1/2"BELT GRINDER TILTS AWAY FROM BELT. 45 DEGREEBELT GRINDER TABLE TILTS TOWARD BELT. 20 DEGREEDIAMETER OF DISC. 12"WORK REST TABLE ON DISC GRINDER. 16-1/4" X 7"DISC GRINDER TABLE TILTS, EITHER WAY. 45 DEGREEPHASE. 1 ...more

SERIAL.703019, MODEL.612V, WIDTH OF BELT. 6" X 48", BELT SPEEDS. 2850 RPM, DIAMETER OF DISC. 12", DISC SPEED. 2500 RPM, BELT RPM. 2800, TABLE TILTS. 45 DOWN & 20 UP, BELT TABLE SIZE. 6-1/4" X 14", DISC TABLE SIZE. 12" X 14", BELT VORIZONTAL OR VERTICAL. YES, DRUM STYLE DUST COLLETOR. YES, MOTOR. 1 HORSEPOWER.

Product KALAMAZOO INDUSTRIAL BELT SANDERMODEL- S660MV, WIRED- 3HP 230/460 3PH CURRENTLY 460V, BELT SIZE- 6″ X 60″, BUILT IN DUST COLLECTOR.

SERIAL. 745, MODEL # BIG BOY-80, YEAR NEW. 1989, BELT WIDTH.6", BELTLENGTH. 89", TABLE LENGTH. 27", TABLE WIDTH. 9.8", LINEAR SPEED. 3900 FPM, PHASE. 1, VOLTAGE. 110, MOTOR HORSEPOWER. 1.5.

OLIVER - Model "M-5360.002 25″: Double-head Wide Belt SanderHead Configuration1st Head. Drum.2nd Head. Combination head. -- 25" Width capacity. -- Belt length: 75″. & s -- Operators Manual. -- Misc. supplies and several extra belts.

Crouch 7″ x 125″ Edge Belt Sander, VH-87, Inventory # 9181, Model: VH-87, S/N: 061094, Abrasive Belt Size: 7″ x 125″, Abrasive Belt Speed: 3,700 FPM, Diameter of Drive Pulley: 8″, Diameter of Idle Pulley: 3 1/2″, Size of Wooden Side Table: 12″ x 48″, Size of Wooden End ...more

Product Ryman Engineering Lathe Mount Belt Grinder, Model 712-LA, Motor- 7.5 hp 230/460 3ph, Uses a 3″ wide belt, Weight 340 lbs.

25” X 5-½” Widebelt Sander with Clock-Wise Rotation of the Sanding Belt, Rubber Covered Contact Sanding Drum, Variable Speed, Pneumatic Belt Tensioning, Double Infeed & Outfeed Covered Hold-Down Rolls, Safety Interlocks and Motor Load Meter., Width of Belt: 25”, Material Thickness: ...more

DMC - UNISAND 2000-M2,.Wide Belt Sander (2) Heads -- 53" Width cap. Drum, Platen.Head Configuration: --1st Head: 11" dia. (300 mm) Rubber-Covered Contac; (2) speeds or inverter adjustable 20 - 25 HP; Varied RPM. --2nd Head: Combination head with drum and graphite covered 2-1/2" finishing platen; 25 HP.: -- 54"x 103" ...more

LASM VOLPATO LS-2 NSS Feed Through Top and Bottom Molding Sander with Inverter Controlled BeltsMolding sander with (2) opposing abrasive belt units with Inverter control on both sanding heads. The profile sander comes with an extension table to support large panels. The regulation of the axis and inclination is manual ...more

TIMESAVER LYNX 37MWT-D-60 37” Metal Wet Belt Sander 2016’ # 7149, TIMESAVER LYNX 37MWT-D-60 37” Metal Wet Belt Sander 2016’ # 7149, Reference # 7149, Model # LYNX 37MWT-D-60, Serial # 33182, Year of manufacture- 2016’, Working width- 36”, Belt width- 37”, Belt length- ...more

CAPACITY:, Belt Width: 53.14", Shortest Work Piece Length: 0.787", Maximum Thickness Work Piece: 3.93", Abrasive Belt Motor: 20 HP, Speed: 1400 RPM, Material Feed: Automatic, Infinitely Variable Feed Speed: 0-157 IPM, Insulation Class: IP 54, Main Drive Motor: (4) x 3 HP, Abrasive Belt for Sanding /Deburring with ...more

The Powermatic Model 30A 6" Belt / 12" Disc Combo Sander is a legendary, heavy-duty industrial woodworking machine built with premium cast-iron construction to eliminate vibration and deliver absolute precision. Designed for contour, flat, and aggressive angle sanding, this floor-standing powerhouse s an articulating ...more

FEIN GRIT HORIZONTAL BELT SANDER, PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $2,750.00, HMC Stock # 22136, Machine Serial No.: 0822194?? (tag torn), Machine Model No.: GIB9-90-01-003-00, New Date: 2007, Sanding Belt Width: 6", Powered Thru Feed Parts System, Vertical Adjustment of ...more

TIMESAVER 2111-13-0 37” Metal Wet Sander 2007’ Stainless # 7688, TIMESAVER 2111-13-0 37” Metal Wet Sander 2007’ Stainless # 7688, Reference # 7688, Model # 2111-13-0, Serial # 30575, Year of manufacture- 2007’, Working width- 36”, Belt width- 37”, Belt length- 60”, Feed ...more

36” GRINDINGMASTER MCSB/B2-900 (3) Head Timesaver Sander, Reference #6613, Model # MCSB/B2-900, Serial # TS1376-04, Working width- 36”, Belt width- 36”, Belt length- 60”, Conveyor width- 36”, Feed belt speeds- 15 – 65 F.P.M., Material thickness- 0 – 5”, Head (1)- Belt ...more

TIMESAVER 2111-12-0 25” Metal Wet Sander Stainless # 7541, TIMESAVER 2111-12-0 25” Metal Wet Sander Stainless # 7541, Reference # 7541, Model # 2111-12-0, Serial # 29565, Working width- 25”, Belt width- 25”, Belt length- 60”, Feed belt speeds- 15 – 30 F.P.M., Material thickness ...more

WILTON COMBINATION BELT & DISC SANDER, TABLE SIZE, DISC 12" X 16 3/8", BELT 7 3/8" X 14 3/4", TABLE TILT (BOTH) 45DEGREE DOWN 20 DEGREE UP, DISC DIAMETER DISC SPEED PLATEN SIZE 12" 1960 RPM 6 1/4" X 14 3/4", BELT SIZE BELT SPEED DIMENSIONS (DEPTH, W, H) DIMENSIONS 6" X48" 2850 SFM, DIMENSIONS W/PLATEN HORIZONTAL ...more

AGE: 2001 MODEL NUMBER: 137-1HPM TEMPORARY : Belt Size: 37" x 75" Contact Wheel Diameter: 6" Part Height: 0 to 5" Conveyor Speed: 15 to 45 FPM NOTE: Per Factory new price as of May 2022 $38,000.00 MOTOR DATA: 20 HP OVERALL DIMENSIONS: 55" x 73" x 78" High WEIGHT: 3,200 Lbs..

Stainless Conveyor without belt or drive [PARTS], Will accept an 18"-20" wide belt to approximately 26'-6" length, Inlet hopper, side cladding and support frame is stainless steel construction.

Stock #: 114250077, Location: Decatur, GA, Brand: Burr-King, Model: 562, Approx. Shipping Weight: 200 Lbs., Approx. Shipping Dimensions: 4' L x 4' W x 6' H, Skidding Fee: $100, Belt Size: 1" x 42", Motor HP: 1/2, Electrical: 460V/3PH, Stand, Additional Info, The Belt Sander can be demoed upon ...more

Two Rivers Enterprise conveyor. 110" long x 24" wide belt with 45" infeed/discharge height, 6" high UHMW product containment walls. Mounted on stainless steel frame., OAD: 125" L x 34" W x 52" H.

TIMESAVERS 4221-45-00 52” Dual Head Metal Wide Belt Sander (2) 75 H.P., TIMESAVERS 4221-45-00 52” Dual Head Metal Wide Belt Sander (2) 75 H.P., Reference #6731, Model # 4221-45-00, Serial # 31360T, Year of manufacture- 2008’, Conveyor belt width- 52”, Belt size- 52” x 103”, Conveyor ...more

EMC FLEXY 1350 2RP Finishing Sander with (2) Sanding Heads, Roller and Segmented Finishing PadUseful working width 1,350 mm (53"). Working thickness min./max. 3 - 180 mm (1/8" - 7-1/16"). Head configuration:1st Head: Roller "R" Belt dimensions: 2,620 x 1,370 mm (103" x 54"). -- Roller diameter: 250 mm (10"). -- Roller ...more

36"37" x 60"7 5/8"0 - 8"15 - 45 FPM460V / 3Ph.6000 lbs102 x 84 x 92"H.