Buy or Sell Your Wide Belt Sander

MAX 30 inch DISC SANDER and SPINDLE SANDER Model 30DVS, Serial Number 94308, CAPACITY:, DISC SANDER: Model 30-SD, Diameter 30", Table:, Working Surface,15"FB x 38½" LR, Plus 3¾" x 7¼" projection beyond disc., Tilting 30 degrees Up ...more

305E2 HYDRAULIC EXCAVATOR, ALARM, TRAVEL, BELT, SEAT, 3' RETRACTABLE, BLADE, 78", BOLT-ON, CABLE, GROUND, CANOPY, TOPS, CONTROL PATTERN CHANGER, COOLING, HIGH AMBIENT, DRAIN, ECOLOGY, ELECTRICAL ARRANGEMENT, FILM, PRODUCT LINK, ANSI, HOOD, REAR, SOLID, INSTRUCTIONS, ANSI, LIGHTS, STANDARD, LINES BOOM W/ BLCV ...more

Inclined stainless steel conveyor. a 15" infeed height, 18" wide x 190" long trough style food grade belt, 25" discharge height. Mounted on a (2) leg stainless steel base frame with casters., OAD: 190"L x 32"W x 26"H.

**PART OF COMPLETE LINE 5H1360A**, Moline Model DSM2000, continous, stainless steel, powdered, granulated or cinnamon sugar rumbler for donut coating system rated from 500 to 2000 dozen donuts per hour – depending on materials and application. Drum : 24" ID; 88" in Length with 1" long x 1/2" ...more

\u00bd" NPT PORTS. IN AND OUT ON SAME 30 \u00bd" SIDE. HANGER BLOCKS ON BOTH 30 \u00bd" SIDES. HANGER RODS INCLUDED. (QTY 7) (ITEM # 838).

One (1) Rebuilt Farrel Lab Mill, 6 x 13" (150 x 330) rolls, cabinet style, under-slung drive, belt driven, flip up guides, 7.5 HP motor and drive, push button controls with START / STOP / REVERSE, knee and overhead safety, 16 week delivery.

(1) Used 48 x.062 Dallas Cabinet Style Servo Feeder, Dallas Model DRFE-448 Servo Feeder, S/N: 20895, Year: 1999, Cabinet Style, Feed Roll: 4 Diameter x 48 Wide, Material Capacity:.062 @ 48 Wide /.125 @ 18 Wide, Dallas Model DRFE-448 Servo Feeder, S/N: 20895, Year: 1999, Cabinet Style, Feed Roll: 4 Diameter x 48 Wide ...more

PDC, Model 75C-ER, S/N 110, 240 volts Single Phase, 1- hp, Conveyor 127 in. L x 3 in. W, 85 in. H x 50 in. W x 127 in. L.

Stainless steel, inclined cleated conveyor. 10" infeed height, 24" wide blue belt conveyor belt with 18" wide x 2" high cleats set on 9¾" centers. Conveyor has 32" long bottom horizontal run, 68" long incline, 24" long top horizontal run with 59" discharge. Powered ...more

used- elf machinery 6 spindle capper, model act 600l. 6 tightening quills; stainless steel construction; 24" gripping belt; 6" belt width opening; adjustable angle cap chute. all quills move independently from center line.

10" Sides, 20' Long, 24" Wide Cleated Belt, 3" High Cleats on 16" Centers., 460V/3PH/60Hz., VSD, A 6" diameter feed roll with bearings in a heavy, duty slide frame, allowing for belt alignment. A 6" diameter drive roll driven by a 1.0 HP, motor/gearbox thru a chain/sprocket system., The bottom of the conveyor is ...more

Conveyor Belt W: 38 L: 198 Longitudinal Groove Belt with Baldor 1 Hp, 1765RPM and Hytrol 4A Gearbox. Belt change available upon request for an additional charge. PLEASE REVIEW: We would ask that potential buyers please examine the photographs carefully, and understand what you are buying. We welcome questions! Please ...more

Stainless steel incline belt conveyor, cleated rubber belt measures 24 wide x 13 long, with 22 working width of belt, cleats measure 18 long x 4 high. Infeed measures 30 from ground, discharge height of 7. Driven by 2 HP 460 volt motor. Previously used in food processing facility., Measurements: 24 wide X 13' ...more

Unifiller stainless steel frame belt conveyor. a 30" wide x 474" long belt with a 40" to 45" infeed / discharge range., OAD: 482"L x 53"W x 80".

SERIAL. 5324, MODEL. PS 3X9, NUMBER OF WORK ROLLS. 9, WIDTH. 48", THICKNESS CAPACITY.030" @ 48" WIDE,.050" @ 36" WIDE,.060" @ 24" WIDE, VFD, AUTO LUBE SYSTEM, MANUAL ROLL ADJUST WITH ELECTRONIC INDICATION.

Wepackit, Model 350CP, 3-axis, automatic, top load, pick and place, case packer. Capable of loading (6) cases at a time at 10 cycles per minute, number of containers and cases – depending on materials, application, and machine configuration. 13¾" wide x 274" long (4) lane Intralox style infeed ...more

Stainless Steel Conveyor. 12 in. W x 22 ft. L flighted intralox belt, 1 in. H flights, 22 in. spacing, hydraulic drive.

246D3 SKID STEER LOADER, BATTERY,HD,DISCONNECT, 850 CCA, CAB PACKAGE, PRO PLUS, CERTIFICATION ARR, P65, COUNTERWEIGHT,MACHINE,EXTERNAL, DOOR, CAB, GLASS, FILM, RIDE CONTROL, ANSI, HEATER, ENGINE COOLANT, 120V, INSTRUCTIONS, ANSI, USA, LANE 3 ORDER, Online Owner's Manual, PACKING, ROLL ON - ROLL OFF, PRODUCT LINK ...more

Marcos Machinery Model STKK24, 24 inch wide x 24 feet long convection cooling tunnel with number of product per hour – depending on materials and application. stainless steel frame and cladding contact parts, 3 foot In feed table with adjustable approach edge, 24" wide x 24′ long pneopreme product ...more

Dorner, Model 2200, aluminum frame belt conveyor. a 12" wide x 60" long belt with a 30" to 40" infeed / discharge range and variable speed controller., OAD: 60"L x 20"W x 30"H.

Dorner, Model 2200, aluminum frame belt conveyor. a 24" wide x 60" long belt with a 30" to 40" infeed / discharge range and variable speed controller., OAD: 60"L x 32"W x 30"H.

Used Hytrol approximately 24" wide belt x 15' long flat belt conveyor on legs with casters. Serial #106A90. Conveyor height is 72" with Approx. 11" additional possible height with adjustment to the legs. Belt is 24" wide howver the trough is 30" in width. an approximately 2HP 230/460 volt gear head motor., HYTROL ...more

Stainless steel, 34" wide x 62" long, conveyor. a 34" wide x 62" long Neoprene belt powered by a 2 hp drive. Mounted on leveling pads with an infeed / discharge range of 36" to 40"., OAD: 62"L x 48"W x 39"H.

UNISANDING - 240K + 120K": Cross & Longitudinal Brush Denibbing Sander with: 51.2" (1,300 mm) widthSuitable for: ● Denibbing on solid & moulded items regardless of orientation in any kind of: Wood, MDF, and HDF. ● Ideal for: Deburring a wide range of metal surfaces and parts. ● Sanding strips ...more

Belt Conveyor, 24" wide X 3'2" long with 52" discharge height. Manufactured by Coastline equipment, serial number 33668-19. Includes four (4) 1/4 HP, 230/460V, 1680 RPM drives. Measurements: 24" Wide X 3'2" Long, Type: Smart Belts Conveyor. Powered by.25 HP. Previously used in food operation and., HP:.25 ...more

2020 CAT 299D3 C3H2 CTL, BATTERY,EXTRA HEAVY DUTY, DISC, BUCKET-GP, 86", BOCE, CAB PACKAGE, PRO PLUS, CERTIFICATION ARR, P65, CONTROL, ISO, PROP, WT, COUNTERWEIGHT,MACHINE,EXTERNAL, DEBRIS MGMT PKG, NONE (DM0), DISPLAY, ADVANCED, LCD, CAMERA, DOOR, CAB, GLASS, FAN, COOLING, DEMAND, FILM, RIDE CONTROL, ANSI, FILM, SELF ...more

Electric Heat 140 Deg. F. Wash and Rinse Temperatures, Heated Air Blow Off, 7" WIde Belt 1x1 Inch Heavy Duty Belt, 12" Part Height, 190 Gallon Wash Tank, 60 GPM SS PUMP, 36 KW Electric Heat, 150 Gallon Rinse Tank, 40 GPM SS PUMP, 36 KW Electric Heat, Sprays From Above, can be modified, Oil Coalscer, OverFlow/ Auto ...more

CAM-WOOD WS-M1000 NAX Planer Sander -- 2 Heads with 39.4" width capacity planer head and combination sanding heads: -- This machine is especially designed for tale off heavy materials such as glue panel, bend board, rough lumber. -- The first head is a knife planer head, with 25 HP motor. The spiral planer cutterhead ...more

Used 14' L x 24" Wide Flatbelt Conveyor 11" High Side Walls 12" Pully Diameter DOES NOT HAVE GEARBOX OR DRIVE, PREVIOSULY DRIVEN BY HYDRAULIC MOTOR Approximate Dimensions: 16' L x 4' W x 2' H.

Stainless Steel Tabletop Conveyor. Belt width: 3-1/4 in. Guide brackets for adjustable guides. Sprocket diameter: 5 in. Pitch: 3/4 in. Leeson DC Motor, 1/2 hp, 1750 rpm, 180 V, 7.6 amps. Sterling Electric Speed Reducer, 20 ratio, 87.5 rpm (final). Overall dimensions: 104 in. L x 19 in. W x 32 in. H.

(2)1000CCA,115A W/DISCONNECT, (8) TEETH W/ADV TIPS, *REAR WINDOW DAMAGE / CRACKED, 2013 CATERPILLAR 950K WHL LOADER, 3 VALVE HYDRAULIC SYSTEM, 7690 BW 1/27/26, ADD'L COUNTERWEIGHT-1100 LBS, ANTI-THEFT SECURITY, LOCKS, AS IS / AS RECEIVED, AXLES, LSD/LSD, ED, BRIDGESTONE VMT 23.5R25(DRY ROT), BUCKET-GP, 4.25 CYD ...more

Mereen-Johnson Model 2050 Double End Tenoner Maximum Width Capacity: 96" to Outside of Feed Chains Minimum Width: 5-1/4" Lay-Up Area: 30" First Station (Not Currently Installed): Trims Saws, 10 HP Each, Tilting Second Station: High-Speed Jump Copes, 10 HP Each Third Station: High-Speed Copes, 10 HP Each Cope Unit ...more

used belmer winkle press dewatering belt press vpk 2s | high-capacity sludge dewatering system. belt working width measures 1500 mm (48") x 15500 mm (50 4") long. 2 x 21 spray nozzles. water pressure 6 bar (90 psi), 18 x 188 mm (7.33") dia driving rolls. belt speed 2.61 m/min (85"/min), stainless steel frame. ...more

BATTERY,HD,DISCONNECT,850 CCA, Bucket, CAB PKG, PRO PLUS, CERTIFICATION ARR, P65, CONTROL, ISO, PROP, WT, DISPLAY, ADVANCED, LCD, CAMERA, DOOR, CAB, GLASS, Engine, FAN, COOLING, DEMAND, FILM, TWO SPEED, HEATER, ENGINE COOLANT, 120V, HYDRAULICS, PERFORMANCE (H2), INSTRUCTIONS, ANSI, USA, LIGHTS, HALOGEN, Online ...more

Dorner, 24" wide x 475" long stainless steel belt conveyor. 24" wide and 475" long food grade belt has an infeed and discharge height of 34½". a Interroll drive, variable speed control, moveable side mounted pack tables and E-stop chord. Unit mounted on locking casters, OAD: 480"L ...more

Aloe Vera Leaf Cubing Machine. Makes 1 in. long x 1 in. wide cuts. Number of rotating blades: (6) 3 in. dia. Distance between blades: 1 in. Drum blade with (8) cutting knives: 3 in. dia. x 8-1/2 in. L. Distance between blades: 1 in. Maximum leaf width: 6 in. Infeed conveyor belt width: 6 in. W. Discharge conveyor belt ...more

90° curved, 39" W x 102" L, Stainless steel, belt conveyor. Product travels 48" in to a 90° curve, then travels 54" before discharging. Mounted on (6) height adjustable legs with casters., OAD: 113"L x 60"W x 41"H.

Loma Model CW3 1500, inline, checkweigher rated up to 140 feet per minute with number of product – depending on materials, application, machine configuration and environment being run in. 304 stainless steel construction with brushed finish, Weight range: 10 to 1500 grams. with Accuracies depending on product ...more

SERIAL. 1527055200, MODEL. TS524-UP, CAPICTY EXTRUDED PIPE OR PROFILES. 5 INCH DIA, BLADE DIAMETER CARBIDE. 18" DIA, BLADE CUTS FROM UNDERNEATH. YES, FLYING TABLE TRAVELS WITH PRODUCT. 24", THE PRODUCT IS CLAMPED WITH ADJUSTABLE RUBBER PADS. YES, MOTIONS ARE ACTIVATED PNEUMATICALLY WITH SEED CONTROL.YES, DIRECTION ...more

Material handling decks and conveyors for a complete post peeling facility. There is no post peeler in this line., - Chop Saw Sorting Line: Post sort belt with (4) 12' kicker zone, 8" slider belt, 76' long, drive, - Log Decks: (4) Post infeed decks with 2-lines of 81x chain, 73' long, drive, - Singulators: ...more

Max Spindle Sander, Serial #, Asset # 12140J, Table Size 24” x 24”, Table Height 39”, Spindle Speed 1725 Rpm, Oscillations per min 75, Length of oscillation 1 ½”, Net Weight 350 Lbs., Table tilt 45 degrees, Voltage 460 Volts, Phase 3 PH, Spindle Size 10”, Preliminary – ...more

Incline cleated belt conveyor measuring 2" wide x 6' long with 60" discharge height, 3" x 3" discharge opening. Unit is mounted on stainless steel base, complete with top side mounted 1/2 hp, 230/460 volt, 1700 rpm drive. Last used on golf balls., HP: 0.5, Type: Incline Cleated Belt Conveyor, Measurements: 2" Wide ...more

Stainless steel, one to four lane, accumlation table. (1) 23¾" wide x 94" long Intralox style belt, (1) 23¾" wide x 58" long Intralox style belt, (2) overhead pneumatic diverting stations with 8" max clearance [(1) one to two lane, (1) two to four lanes]. Adjustable width lane ...more

used 10 inch wide x 201 inches long incline intralox belt conveyor stainless steel sanitary; infeed at 12 inches high; discharges at 41 inches high; stainless steel siderails run entire length of unit; all stainless steel sanitary construction; hydraulic driven; portable on casters ; last used in a food application.

Cincinnati #107-4 Centerless Grinder, 16" OD Grinding Wheel, 4" Infeed Workrest W/ Kicker, Attached Electrical, #107-4 CINCINNATI CENTERLESS GRINDER, S/N 1M1H5C-54 YEAR: 1955, STANDARD CATALOG, CAPACITY, Infeed work rest. 0" to 1 1/2 dia., Thru feed work rest. 0" to 1 1/2 dia., (Work rests not included as standard ...more

Nercon, 40" wide x 170" long, stainless steel wire mesh belt conveyor. a 1HP drive and mounted on stainless steel legs with an infeed and discharge range of 40" to 45"., OAD: 170"L x 64"W x 45"H.

Conveyor MFG & Service Inc, inclined stainless steel,19" wide x 228" long conveyor. infeed at 15" high, ribbed rubber belt, lift up covers and discharges at 75" high. Powered by a ½ HP drive., OAD: 230"L x 33"W x 85"H.

8" Wide Stainless Steel Conveyor with Drive Motor. Measuring 8" wide by 4'1" long, this conveyor comes without a belt but is driven by a 1/2 HP motor operating at 230/460V and 1725 RPM. It includes a stainless steel guard and is frame-only, lacking nameplate data., HP: 0.5, Type: Frame Only, Measurements: 8" Wide ...more

Brand: GEA NIRO, Condition: USED, "AS-IS", Model: -, Nat'l Board: -, Serial: -, Power Rating: -, Weight: APPROX. 15,000 LBS, Category: DRYERS, Shipping Dimensions: 255" x 126" x 126", ERC #: MO-4535, Job #: 104, Additional Notes: 120" TOP DIAMETER OF TANK, 63" STRAIGHT SIDE, 95" CONE SIDE, 126" LEGS, 8-1/2" ...more