1 / 2
Click to zoom in
1 / 2
For Sale by Bullseye Industrial Sales LLC
Surplus Record Dealer Since 2017
Location: Middlebury, IN
Contact Keith Couturier
Phone Number: 574...> Show Phone Number 574-825-4990
Let the seller know you found their listing on Surplus Record!
$7,370 USD
Description
- HP: 10
- Voltage: 230/460V
- Phase: 3
- Press Rating Ton: 105
- Stroke (inches): 8"
- Ram Open Height w/adjustment up (Inches): 23"
- Ram Shut Height w/Adjustment up (Inches): 18"
- Ram Adjustment Length (Inches): 4"
- Ram Die Shank Size (Inches): 4"
- Ram Bolt Distance (Center to Center) (Inches): 5"
- Throat Opening (Frame to Center of Ram) (Inches): 16"
- Bed Size (Front to back x Wide) (Inches): 330" x 39"
- Bed Opening (Front to back x Wide) (Inches): 6" x 20-12"
- Machine was tested and repaired where needed.
- Air cooled clutch was removed, and fully serviced and fitted with new gasket
- Air clutch consumes a lot of air volume, suggest a small air tank be fitted for consistent operation
- If air for cooling clutch is inadequate then a brake fault will arise as there is a thermal sensor on assembly. Works in "inch, Single stroke, continuous stroke."
- Some adjustments may be necessary after installation, grease/oil top off, stroke adjustments, brake adjustments etc., to suit operation.
Inquire Further with Bullseye Industrial Sales LLC!
Buyers Who Viewed This Listing Also Viewed:
110 Ton, E.width Bliss #C110, punch press, 6" stroke, 17" Shut Height, 4" adj., 35-70 SPM, 460 V., 3-phase
Category: Mechanical Punch Presses
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: E.w. Bliss
Model: C110
Technical, Manufacturer: E.W. Bliss, Model: C110, Serial Number: H66046, Tonnage Capacity: 110 Tons, Bolster Area: 42"x27", Slide Adjustment: 4", Mechanical Performance, Stroke Length: 6", Strokes Per Minute: 3570, Shut Height: 17", Maximum Press Air Pressure: 100 PSI, Power Requirements, Primary Voltage: 460V, Phase: ...more
JUST ADDED!
60 Ton, Bliss #C-60, Punch Press, Air Clutch, 4" stroke, 32" x22" bed, 3" adj., 14-1/4" Shut Height, 100 SPM,
Category: Mechanical Punch Presses
Seller: GTH Used Machinery Intl
Location: Pico Rivera, CA
Model: C-60
15 Ton Benchmaster #251, Punch press, 2" stroke, 6-3/4" Shut Height, 11" x15" bolster
Category: Mechanical Punch Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Benchmaster
Model: 251
Product, BENCHMASTER MODEL 251 PUNCH PRESSTONS- 15, STROKE- 2″, SHUT HEIGHT- 6 3/4″, BOLSTER PLATE- 11″ X 15″, WEIGHT- 780 LBS, WIRED- 230/460 3PH.
40 Ton, Rogers #Press-40, Punch Press, 3" Stroke, 8.5" Shut height, 1" Punch Hole thru 3/8" Material, 48 SPM, 2 HP, 1725 RPM, new
Category: Mechanical Punch Presses
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Model: PRESS-40
Rogers 30 Ton Punch Press, Press # 40, Inventory # 8230, Model: Press # 40, Made in USA, Punch Capacity: 30 Tons, Punch: 1″ Round Hole Thru 3/8″ Material, Stroke: 3″, Shut Height: 8 1/2″, Standard s:, Welded steel frame, Operates on 2 HP, 1,725 RPM motor. Three phase or single phase available ...more
JUST ADDED!
Dalcos #PXN-800, Automatic Coil Hydraulic Punch Press
Category: Mechanical Punch Presses
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Dalcos
Model: PXN-800
Used Dalcos PXN-800 Hydraulic Punch for Sale. This pre-owned Dalcos hydraulic punch is located in Ohio. If you have any questions regarding this Dalcos Hydraulic Punch, please feel free to contact us. You may Activate Pricing to view the price of this CNC Machine, or request a quote by clicking on the Inquire Now ...more
