651 - 700 of 769 listings
Sharp #LMV-42-DVS, manual vertical mill, 2013
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Sharp
Model: LMV-42-DVS
Year: 2013
Sharp #LMV-49, Vertical Milling Machine w/Standard DVS Head, 9" x 49" Table, 36.6" X, 12" Y, 5" Z, (3) 5/8" T-Slot, 12" Ram, 16" Knee, 3 HP, 65-4500 RPM, R8 Taper, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Sharp
Model: LMV-49
Sharp 9″ x 49″ Vertical Milling Machine with Standard DVS Head, LMV-49-DVS, Inventory # 2534, Model: LMV-49 with DVS Head, Working Surface: 9″ x 49″, T-Slots, Number x Size: 3 x 5/8″, Capacity:, Travels (X, Y, and Z): 36.6″ x 12″ x 5″, Ram Travel: 12″, Knee Travel: ...more
Sharp #LMV-49K-DVS, vertical mill package, 9" x49" table, 3 HP, 60-4500 RPM, R-8 Spindle
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-49K-DVS
9” X 49” Capacity Vertical Milling Machine with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Meehanite Casting, Chromed Ways, elf-Lubricating Motor Shaft, Abec-7 Super Precision Spindle Bearings, Digital Variable Speed, 3- Axis Digital Readout (quill, saddle and table), X –axis Power ...more
Sharp #LMV-49K-N Manual Mill, 9" x49" table, 3 HP, New
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-49K-N
9” X 49” Mill with Newall NMS 300 3 - Axis Digital Readout, X - Axis Power Feed, Digital Variable Head (DVS) Wire 220 V Only,(Transformer Needed for 440V), Hard - Chrome Ways and Gibbs, Precision Ground and Flaked Table, Unique Double Nut Backlash System, Cutler Hammer On / Off Switch, Front and Rear Way ...more
Sharp #LMV-50, vertical mill, 9" x50" tbl., 3 HP, 37" X, 12" Y, 16" Z, 60-4500 RPM, R-8, Fagor 2-Axis digital read out, X & Y-Axis power feed, 2009
Generation Machine Tools | Sarasota, FL
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Sharp
Model: LMV-50
Year: 2009
SHARP LMV-50 Vertical Milling Machine 2 Axis DRO 2009’ #8198, ImperialMetricTable-W 9" 228.6 mm Table-L 50" 1,270 mm Travel-Long 12" 304.8 mm Travel-Cross 37" 939.8 mm Power 3 hp 2.2 kW RPM 4,500 RPM 4,500 RPM Taper R-8 R-8 Dimensions 60” x 55” x 83” 60” x 55” x ...more
Get email updates for newly added Bed and Knee Milling Machines - Vertical
Bed and Knee Milling Machines - Vertical (also known as vertical milling machines) are machines that use a vertically oriented spindle to perform precision milling operations. Commonly used in industries like metalworking, automotive, and aerospace, they are ideal for tasks such as drilling, boring, and surface grinding. These machines are essential for creating detailed, high-precision parts and components.
Sharp #LMV-50, vertical knee mill, 9" x50" table, 3 HP, 60-4500 RPM, R-8 Spindle, dual fans
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: LMV-50
9" X 50" Manual Vertical Knee Mill with 3HP Motor Variable Speed Drive (60-4500 RPM), R-8 Spindle, Dual Cooling Fans, Meehanite Casting, Chromed Ways, Self-Lubricating Motor Shaft Extends Pulley Life, Abec-7 Super Precision Spindle Bearings, Precision Ground and Flaked Table, Unique Double Nut Backlash System, Double ...more
Sharp #LMV-50, Vertical Milling Machine, 9" x 50" Table, 37" X, 12" Y, 5" Z, (3) 5/8" T-Slot, 12" Ram, 16" Knee, 3 HP, 60-4500 RPM, R8 Taper, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Sharp
Model: LMV-50
Sharp 9″ x 50″ Vertical Milling Machine, Inventory # 4484, Model: LMV-50, Table:, Working Surface: 9″ x 50″, T-Slots Number And Size: 3 Slots, 5/8″, Capacity:, Travels (X, Y and Z): 37″ x 12″ x 5″, Ram Travel: 12″, Knee Travel: 16″, Spindle To Column (Min. ...more
Sharp #LMV-50-DVS, Vertical Turret Mill, 9" x 50" table, 36.6" X, 12" Y, 5" Z, 12" ram travel, 16" vertical knee travel, 3 HP, 4500 RPM, 6" Kurt vise, 2-axis Newall digital read out, 220 Volt, 2002
Naab Sales Corporation | Blaine, MN
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: LMV-50-DVS
Year: 2002
Here We Have, Sharp LMV-50 DVS Vertical Knee Mill W/ Digital Variable Speed, 2 Axis Newall DRO, Note: Can be run on 1 phase Power 220v, Make: Sharp, Model LMV- 50 DVS, Serial Number: 426858, New in 2002, Table Size: 9” x 50”, T-slots (No., Size, Pitch): 3, 5/8”, 2.5”, Table Travel: X ...more
Sharp #LMV-50-DVS, Vertical Turret Mill, 9" x 50" table, 36.6" X, 12" Y, 5" Z, 12" ram travel, 16" vertical knee travel, 3 HP, 4500 RPM, 6" Kurt vise, 3-axis Newall digital read out, 220 V.
Naab Sales Corporation | Blaine, MN
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Sharp
Model: LMV-50-DVS
Here We Have, Sharp LMV-50 DVS Vertical Knee Mill W/ Digital Variable Speed, 3 Axis Acu-Rite DRO, Note: Can be run on 1 phase Power 220v, Table Size: 9” x 50”, T-slots (No., Size, Pitch): 3, 5/8”, 2.5”, Table Travel: X Longitudinal: 36.6”, Table travel: Y Cross: 12”, Quill travel: Z ...more
Sharp #LMV-50/DVS, Vertical Mill, 50" x 9" table, 1720 RPM, 3 HP, Acu-rite Control, 2006
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Sharp
Model: LMV-50/DVS
Year: 2006
Inventory No. 0326-064-0005 Manufacturer Sharp Industries Model No. LMV-50/DVS Name Vertical Mill Arrival Date 04-01-2026 Dimensions L x W x H (inches) 60 x 62 x 93 Capacity 50" X 9" Electrical 3/60/220/440 Weight (lb.) 3225 Category Machine Tools Condition Used Available Quantity 1 Serial No. 50329291 Make Year 2006 ...more
Sharp #LMV-50/DVS, Vertical Mill, 50" x 9" table, 1720 RPM, 3 HP, Acu-rite Control, 2007
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Sharp
Model: LMV-50/DVS
Year: 2007
Inventory No. 0326-064-0004 Manufacturer Sharp Industries Model No. LMV-50/DVS Name Vertical Mill Arrival Date 04-01-2026 Dimensions L x W x H (inches) 63 x 58 x 84 Capacity 50" X 9" Electrical 3/60/220/440 Weight (lb.) 3110 Category Machine Tools Condition Used Available Quantity 1 Serial No. 50829580 Make Year 2007 ...more
Sharp #QMV-1, knee type, 10" x50" table, 35' travel, 60-4500 RPM, 3-Axis Servo feeds, Fagor 2-Axis digital read out, 3 HP, 2002
Piedmont Machy of Charlotte | Charlotte, NC
Seller: Piedmont Machy of Charlotte
Location: Charlotte, NC
Mfr: Sharp
Model: QMV-1
Year: 2002
Sharp #Sharp-HMV, Vertical Mill, 9" x 49" table, Anilam Miniwizard digital read out, 3 Hp, 1985
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Sharp
Model: SHARP-HMV
Year: 1985
Inventory No. 0326-088-0008 Manufacturer Sharp Industries Model No. SHARP-HMV Name Vertical Mill Arrival Date 04-20-2026 Dimensions L x W x H (inches) 72 x 66 x 86 Capacity 9" X 49" Electrical 3/60/220/440 Weight (lb.) 2790 Category Machine Tools Condition Used Available Quantity 1 Serial No. 74070221 Make Year 1985 ...more
Sharp #TMV, vertical knee mill, 10" x50" table, 18.5" ram, 3 HP, 4500 RPM, Accurite digital read out, 2006, AS IS
Source Machinery Sales | Fridley, MN
Seller: Source Machinery Sales
Location: Fridley, MN
Mfr: Sharp
Model: TMV
Year: 2006
- *All are approximations and are subject to verification, - Sharp Vertical Mill Model TMV, - Table Size: 10" x 50", - Travels:Longitudinal (X): 39"., - Cross (Y): 16.3", - Knee (Vertical): 15.3", - Ram: 18.5", - Quill: 5", - Spindle:Motor:, - HP 3 HP, - Speed: Variable, 60 to 4500 RPM., - Taper: R-8, - Accurite DRO - ...more
JUST ADDED!
Sharp #TMV, Vari-speed Head Vertical Knee Mill, 10" x54" table, 18.5" x5" x 15.3" travel, 28.3" throat, 3 HP, 4500 RPM, 1-shot lube, w/ tooling, new
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Sharp
Model: TMV
ü Table ¨ Working Surface 10” x 54”, ¨ T-Slots Number and Size 3 Slots, 5/8”, ¨ 26” Wide Saddle, ü Capacity, ¨ Travels (X & Y) 39” x 16.3”, ¨ Quill Travel 5”, ¨ Ram Travel 18.5”, ¨ Knee Travel 15.3”, ¨ Throat Distance ...more
Sharp #TMV, Vertical Knee Mill, 33" x16.3" table, 3 HP, New
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: TMV
33" X 16.3" Traveling Manual Vertical Knee Mill with Hardened & Ground Box ways on Column & Saddle for Maximum Rigidity, 3 HP Motor, R-8 Spindle, Knuckle joint using bolts & circular T-slot design; allowing head to swivel left & right, up & down, Dual fan head cooling System, Double-Nut Backlash ...more
Sharp #TMV-1, heavy-duty knee mill, 10" x 54" table, 39" x 16.3" x 5" travels, 5 HP, variable speed
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: TMV-1
39”x 16.3” X 5” Travels Heavy Duty Vertical Knee Mill with 5 Hp Motor, Variable Speed Drive (60-4500 RPM), NT-40 Spindle, Hardened & Ground Box Ways On Column And Saddle, Dual Cooling Fans, Meehanite Casting, Self-lubricating Motor Shaft, Abec-7 Super Precision Spindle Bearings, Turcite Coated ...more
Sharp #TMV-1, Vertical Knee Mill, 10" x 50" Table, 39" X, 16.5" Y, 5.3" Z, (3) 5/8" T-Slot, 19" Ram, 15.3" Knee, 5 HP, 60-4500 RPM, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Sharp
Model: TMV-1
Sharp 10″ x 50″ Vertical Knee Mill, TMV-1, Inventory # 2238, Model: TMV-1, Table:, Working Surface: 10″ x 50″, T-Slot Number, Size: 3, 5/8″, Capacity:, Table Travel (X-Axis): 39″, Saddle Travel (Y-Axis): 16 1/2″, Ram Travel: 19″, Quill Travel (Z-Axis): 5.3″, Knee ...more
Sharp #TMV-K, vertical knee mill package, 10" x50" table, 3 HP, 4500 RPM, R-8 spindle
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Sharp
Model: TMV-K
33" X 16.3" Traveling Manual Vertical Knee Mill with 3HP, 4,500 RPM R-8 Spindle Drive, Hardened, Ground and Chromed Box Way Design, Meehanite Casting, Digital Read-Out, Power Drawbar and Power Feed Included., Working Surface: 10” x 50”T-Slots Number and Size: 3 Slots, 5/8”Saddle: 26” Wide ...more
Sharp #V-1, Vertical Knee Type Mill, 12" x 58" Table, 40" X, 6" Y, 5" Z, (3) 5/8" T-Slot, 17.75" Ram, 16" Knee, 5 HP, 70-4000 RPM, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Sharp
Model: V-1
Sharp 12″ x 58″ Vertical Knee Type Mill, Inventory # 2239, Model: V-1, Table:, Working Surface: 12″ x 58″, T-Slot (Number, Size, Pitch): 3, 5/8″, 2 1/2″, Capacity:, Table Travel (X-Axis): 40″, Saddle Travel (Y-Axis): 6″, Ram Travel: 17 3/4″, Quill Travel (Z-Axis): ...more
Sharp, vertical mill, 9" x42" tbl., 2 HP, Accu-Rite digital read out, 6" Kurt vise
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Sharp
9" X 42" Table, 2 HP, Kurt 6" Mill Vise, Accu-Rite Digital Read Out, Machine Type.Millers, Vertical Manufacturer.SHARP Model.N/A Year.N/A Condition.Used.
Sharp, ram type vertical mill, 10-1/2" x51" T-slotted table, 3 HP, 6" Kurt vise, chrome ways, 1984
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Sharp
Year: 1984
SERIAL. #84110643, YEAR NEW. 1984, TABLE AREA (T-SLOTTED). 51" X 10-1/2", LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 15", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. 15-1/2", SPINDLE SPEEDS. 60 TO 450 RPM, SPINDLE FEEDS.0015 -.003 -.006 IPR, TAPER IN SPINDLE. R-8, DISTANCE SPINDLE TO TABLE. 22" ...more
Sharp, vertical mill with Proto Trak MX2 controller, 10" x51" table
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Sharp
SHARP VERTICAL MILL, 10" X 51" TABLE, PROTOTRAK CONTROLLER.
Sharp, Vertical Mill, 9" x 42" Table, 3 HP, 1720 RPM, 220/440 V.
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Sharp
Inventory No. 0326-070-0005 Manufacturer Sharp Name Vertical Mill Arrival Date 04-13-2026 Dimensions L x W x H (inches) 64 x 65 x 87 Capacity 42" X 9" Electrical 3/60/220/460 Weight (lb.) 2050 Category Machine Tools Condition Used Available Quantity 1 Item Accurite Controls, 1720 Rpm, Made In Taiwan.
Sharp, Vertical Knee-Type Turret Milling Machine, 3 HP, 4500 RPM, vise collets, Sony power feed, digital read out, 230 V.
S and R Machines | Bristol, CT
Seller: S and R Machines
Location: Bristol, CT
Mfr: Sharp
eBayThe Sharp Mill with DRO and Sony power feed is a high-quality milling machine designed for precision metalworking. With a powerful 3 HP spindle and a maximum spindle speed of 4,001 - 4,500 RPM, this electric mill offers reliable performance for a variety of milling tasks. The machine s an R8 spindle taper and ...more
Sharp, Vertical Knee Mill, 3 HP, 4500 RPM, vise collets, digital read out, Sony power feed, 230 Volt
S and R Machines | Bristol, CT
Seller: S and R Machines
Location: Bristol, CT
Mfr: Sharp
Sharp, Vertical Knee Mill, 3 HP, 4500 RPM, digital read out, Sony power feed, 230 Volt
S and R Machines | Bristol, CT
Seller: S and R Machines
Location: Bristol, CT
Mfr: Sharp
Sharpe #LMV, 9" x42" Table, 3 HP, 220/440 Volt 3Ph Milling Machine W/Proto Trak digital read out, 1989
Global Machine Brokers LLC | Guilford, CT
Seller: Global Machine Brokers LLC
Location: Guilford, CT
Mfr: Sharpe
Model: LMV
Year: 1989
Sharpe LMV.
South Bend #Chipnaster-II, vertical mill, 10" x50"table, 5 HP V-Speed, digital read out
C.W. Wood Machinery Inc | Cincinnati, OH
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: South Bend
Model: CHIPMASTER II
SOUTH BEND VERTICAL MILL, MODEL: Chipmaster II, SERIAL NUMBER: SE37301, Table Size: 10" x 50", Longitudinal Travel, Manual: 33", Longitudinal Travel, Power: 30", Vertical Knee Travel: 16", Cross Travel: 16", Ram Travel: 22", Spindle Taper: R-8, Spindle Speeds, Infinitely Variable: 55 - 6000 RPM, Power Feed: ...more
South Bend #EVS-Chipmaster-II, ram type vertical mill, 10" x50" table, 5 HP, automatic lube, #62333
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: South Bend
Model: EVS-CHIPMASTER-II
Year: 1995
SERIAL. SE39873, MODEL. EVS CHIPMASTER II, AREA OF TABLE. 50" X 10", SPINDLE SPEEDS, INFINTE VARIABLE. 0 TO 5000 RPM, SPINDLE FEEDS (ENGLISH).0015,.003,.006 IPR, SPINDLE FEEDS (METRIC).0016,.004 &.008 MMPR, LONGITUDINAL TABLE TRAVEL. 33", CROSS TRAVEL. 16", VERTICAL KNEE TRAVEL. 16", QUILL TRAVEL. 5", RAM TRAVEL. ...more
Southwestern Industries Industries #TRAK-DPM, 3-Axis CNC/Manual Operation Bed Mill, 31" X, 17" Y, 25" Z, 1.5" mild steel drilling, 1.25" tapping, 4.75" boring, 5 HP, 4200 RPM, 2018
Naab Sales Corporation | Blaine, MN
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Southwestern Industries
Model: TRAK-DPM
Year: 2018
Here We Have:, Proto Trak DPM CNC/Manual Operation Bed Mill with 3-axis A.G.E. Control UPDATED(2018), Make: Southwest Industries, Model: DPM 3 Axis, Serial # 96-2413, New in 1996 Updated Control 2018, Table size: 10” x 50”, X Travel: 31”, Y Travel: 17”, Z Travel: 25”, Quill diameter: ...more
Southwestern Industries #Trak-K3-E, vertical mill, 50" x10" table, 750 table capacity
Bass Machinery LLC | Toledo, OH
Seller: Bass Machinery LLC
Location: Toledo, OH
Mfr: Southwestern Industries
Model: TRAK K3-E
Year: 2000
SOUTHWESTERN INDUSTRIES Trak K3-E Vertical Mill, Quill Diameter: 3.375", Table: 50" x 10", Table Capacity: 750 Lbs., Table Travel: 32", Knee Travel: 16", Ram Travel: 24", Quill Travel, Max.: 5", Spindle Taper: R8, Spindle Speed: 30 to 4200 RPM, Head Tilt, Front-Back: 45 Degrees, Head Tile, Left-Right: 90 Degrees ...more
Southwestern Industries #Trak-DPM, bed mill with AGE 3 Control, serial #98-4664
Wenco Machinery Corp | Ringwood, NJ
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Southwestern Industries
Model: TRAK-DPM
Southwestern Industries #Trak-DPM-5, Vertical Bed Mill, 3950 RPM, 5 HP, 10" x 50" table, 220 V., KMX upgrade cnc, 1996
Dominion Air & Machinery Co | Roanoke, VA
Seller: Dominion Air & Machinery Co
Location: Roanoke, VA
Mfr: Southwestern Industries
Model: TRAK-DPM-5
Year: 1996
Southwestern Industries #Trak-DPM-SX2, Milling Machine, 9" x49" table, 32" X, 16" Y, 27" Z, 4200 RPM, 3 HP, 110 V., Prototrak SMX Control, 2007
R & J Machinery Sales | Milford, MI
Seller: R & J Machinery Sales
Location: Milford, MI
Mfr: Southwestern Industries
Model: TRAK-DPM-SX2
Year: 2007
https://youtu.be/xM0e54Fie60?si=XR-sL0FEfS_B_Tg3, Table Size.49" x 9", X-Axis.32, Y-Axis.16 Z, -Axis.27, Quill Diameter.3 3/8", Maximum Quill Travel.5", Spindle Taper.R8, Spindle Speed Range RPM -, Varispeed drive.70-4200, Spindle Center to Column Face.18", Spindle Motor Power - vari-speed head.3 HP, Power ...more
Southwestern Industries #Trak-DPM-SX3P, universal mill, 10" x50" tbl., 5 HP, 31" X, 17" Y, 23.5" Z, 40-5000 RPM, ProtoTrak SMX, power draw bar, 2013
R & J Machinery Sales | Milford, MI
Seller: R & J Machinery Sales
Location: Milford, MI
Mfr: Southwestern Industries
Model: TRAK-DPM-SX3P
Year: 2013
https://youtu.be/BA1t7jkwLvc?si=J4WOLO0AuJ0fbtlc, Machine, •Table Size – 50” x 10” •T-Slots (number x width x pitch) - 3 x.63" x 2.48" •Travel (X, Y, Z axis) - 31 x 17 x 23.5" •Quill Diameter - 3 15/16" •Maximum Quill Travel - 5” •Spindle Taper - NMTB 40 ...more
Southwestern Industries #Trak-DPM-SX3P, 10" x50"tbl., 5 HP, 31" X, 17" Y, 23.5"Z, 40-5000 RPM, #40, Prototrak SMX, power draw bar, programmable E head, 2013
R & J Machinery Sales | Milford, MI
Seller: R & J Machinery Sales
Location: Milford, MI
Mfr: Southwestern Industries
Model: TRAK-DPM-SX3P
Year: 2013
https://youtu.be/qUjJQx7DfnI?si=TR1qMtLiUrL3Do55, Machine, •Table Size – 50” x 10” •T-Slots (number x width x pitch) - 3 x.63" x 2.48" •Travel (X, Y, Z axis) - 31 x 17 x 23.5" •Quill Diameter - 3 15/16" •Maximum Quill Travel - 5” •Spindle Taper - NMTB 40 ...more
Southwestern Industries #Trak-DPM-SX5P, 12" x50"tbl., 5 HP, 40" X, 20" Y, 23.5"Z, 40-5000 RPM, #40, Prototrak SMX, power draw bar, programmable E head, 2011
R & J Machinery Sales | Milford, MI
Seller: R & J Machinery Sales
Location: Milford, MI
Mfr: Southwestern Industries
Model: TRAK-DPM-SX5P
Year: 2011
https://youtu.be/tHwx3cMjJ0I?si=SRkfg7cxcaqSzAwL, Table Size - 50" x 12", Travel (X, Y, Z axis) - 40 x 20 x 23.5", Quill Diameter - 3 15/16", Maximum Quill Travel - 5", Spindle Taper - 40, Spindle Speed Range - 40-600, 300-5000, Spindle Center to Column Face - 20", Spindle Motor Power - 5 HP, Power requirements ...more
Southwestern Industries #Trak-DPMS3XP, bed type mills, 50" x10"tbl., 31" X, 17" Y, 23.5"Z, Proto-Trak-SMX, vise
Machine Tool Bids | Chicago, IL
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Southwestern Industries
Model: TRAK-DPMS3XP
Used Trak DPMSX3P Vertical Milling Machine in good working condition. Precision CNC milling ideal for toolrooms, prototyping, and production shops. Reliable performance, easy operation, and durable industrial build., MACHINE, Table Size: 50 x 10, Table Load Capacity: 1320 lbs, X-Axis Travel: 31, Y-Axis Travel: 17 ...more
Southwestern Industries #Trak-DPMSX2, knee mill with powerfeed, Prototrak SMX digital read out / controller, 9" x49" table, 3 HP
Machinery Network Inc | Encino, CA
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Southwestern Industries
Model: TRAK-DPMSX2
Table Size: 9" x 49", X-Axis Travel (Table Longitudinal): 32", Y-Axis Travel (Saddle Cross): 16", Z-Axis Column Travel: 23.5", Maximum Quill Travel: 5", Maximum Workpiece Weight: 1,320 Lbs, 3 Horsepower Spindle Motor.
Southwestern Industries #Trak-FHMSX-7, Milling Machine, 14" x76" table, 60" X, 23" Y, 20.5" Z, 5000 RPM, 7.5 HP, 110 V., Prototrak SMX Control, 2010
R & J Machinery Sales | Milford, MI
Seller: R & J Machinery Sales
Location: Milford, MI
Mfr: Southwestern Industries
Model: TRAK-FHMSX-7
Year: 2010
https://youtu.be/AFxHciqQxAU?si=GECnbAZqzay3UYso, Table Size: 76" x 14", T- Slots: 4 x 16mm x 63.5mm, Travel X: 60", Travel Y: 23", Travel Z: 20.5", Quill Diameter: 5.06", Spindle Taper: 40, Spindle Speed Range: 200-5000 RPM, Spindle Center to Column Face: 23", Spindle Motor Power: 7.5 HP, Power Requirement, Control: ...more
JUST ADDED!
Southwestern Industries #Trak-K2, CNC Mill AGE3 Control, 10" x50" ytable, R8 spindle
The LR Brown Mfg Co | Wallingford, CT
Seller: The LR Brown Mfg Co
Location: WALLINGFORD, CT
Mfr: Southwestern Industries
Model: TRAK-K2
Southwestern Industries Trk K2 Vertical Mill, 10x50 Table, R8 Spindle Taper, 3-Axis AGE 3 Control, Beautiful machine in excellent working condition.
Southwestern Industries #Trak-K3, Vertical Mill, 32" X, 16" Y, 50" x 10" table, 3 HP, 4200 RPM, 115/220 Volt, 1PH/3PH
Relco Industries | Southampton, PA
Seller: Relco Industries
Location: Southampton, PA
Mfr: Southwestern Industries
Model: TRAK-K3
SOUTHWESTERN INDUSTRIES TRAK K3 updated control Proto Trak KMX, 2020, Table-W 10" 254 mm Table-L 50" 1,270 mm Travel-Long 32" 812.8 mm Travel-Cross 16" 406.4 mm Power 3 hp 2.2 kW Stock#R861, Model K3, Serial#980155, Control Proto TRAK KMX 2020, Axis 2, Machine (TRAK K3), Table Size 10″ x ...more
Southwestern Industries #Trak-TRM, 2-Axis CNC bed mill, 10" x50" table, 3 HP, 1995, #14143
Blumberg Machinery Co | Bannockburn, IL
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Southwestern Industries
Model: TRAK-TRM
Year: 1995
SOUTHWESTERN INDUSTRIES TRAK TRM 2--AXIS CNC BED MILL, New 1995, Motor Driven with 3 HP, 3-Phase, 60 Cycle, AC Motor & Controls, Trak A. G. E. 3 CNC Controls, Power Draw Bar, Power Feed For Elevation, RS232 Port, Coolant, Table Size 10" x 50" Travels X - Axis 31" Y - Axis 17" Z - Axis 25" Quill Diameter 3-15/16" ...more
Summit #EVS-349B, vertical mill, 9" x49" table, 3 HP, 0-4300 RPM, R-8,15" overarm adjustment, NEW
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Summit
Model: EVS-349B
Motor Size 3 HP Number of Spindle Speeds Inf. Variable Speed Range (RPM) 0 - 4300 Spindle Taper R-8 Spindle Traverse 5” Spindle Feed Range.0015/.003/.006 Head Movement Side to Side +/- 90 Degrees Head Movement Front to Back +/- 45 Degrees Table: Table Size 9”x49”x3 1/8” Table Longitudinal Feed ...more
Summit #EVS-349B, milling machine, 9" x49"table, 3 HP, 2-Axis Newall NMS800 digital read out, power feed
Naab Sales Corporation | Blaine, MN
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Summit
Model: EVS-349B
Here We Have:, New Summit EVS 349B Milling Machine With 2 Axis NMS800 Newall DRO, X Axis Pwr. Feed, 6”Vise, Hold Down Kit, Collet Rack and Set of R-8 Collets, Motor Size 3 HP, Number of Spindle Speeds Inf. Variable, Speed Range (RPM) 0 – 4300, Spindle Taper R-8, Spindle Traverse 5”, Spindle Feed ...more
Summit #EVS-349B, vertical mill, 9" x49" tbl., 3 HP, variable speed, 60-4200 RPM, R-8, coolant
C.W. Wood Machinery Inc | Cincinnati, OH
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Summit
Model: EVS-349B
NEW) SUMMIT VERTICAL MILLING MACHINE, MODEL: EVS-349B, FACTORY, Heavy Cast Iron Construction, Heavy Box Saddle, Table Size: 9" x 49", Longitudinal Table Travel: 31", Cross Table Travel: 13", Spindle Speeds, Infinitely Variable: 60-4200 RPM, Spindle Taper: R-8, Spindle Travel: 5", Spindle Feed Range:.0015",.003",.006" ...more
Summit #EVS-350B, 10" x50" tbl., 3 HP, variable speed, 4300 RPM, R-8, coolant, one shot lube
C.W. Wood Machinery Inc | Cincinnati, OH
Seller: C.W. Wood Machinery Inc
Location: Cincinnati, OH
Mfr: Summit
Model: EVS-350B
(NEW) SUMMIT VERTICAL MILLING MACHINE, MODEL: EVS-350B, FACTORY, Heavy Cast Iron Construction, Heavy Box Saddle, Table Size: 10" x 50", Longitudinal Table Travel: 36", Cross Table Travel: 16", Spindle Speeds, Infinitely Variable: 0-4300 RPM, Spindle Taper: R-8, Spindle Travel: 5", Spindle Feed ...more
JUST ADDED!
Summit #EVS-354B, Vertical Mill, 3 HP, 4300 RPM, 10" x54" table, 22" overarm adj., 1-shot lube, w/ tooling, new
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Summit
Model: EVS-354B
Motor Size 3 HP Number of Spindle Speeds Inf. Variable Speed Range (RPM) 0 - 4300 Spindle Taper R-8 Spindle Traverse 5” Spindle Feed Range.0015/.003/.006 Head Movement Side to Side +/- 90 Degrees Head Movement Front to Back +/- 45 Degrees Table: Table Size 10”x54”x3 1/8” Table Longitudinal Feed ...more
Summit #EVS-550, 11" x52" table, 5 HP, 32" X, 16" Y, 22" Z, 80-3650 RPM, Fagor 3-Axis digital read out
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Summit
Model: EVS-550
11" X 52" TABLE, 80 - 3650 RPM VARIABLE SPEED, CAT 40 TOOLING, 32" LONG TRAVEL, 16" CROSS TRAVEL, 22" KNEE TRAVEL, FAGOR 3 AXIS DIGITAL READ OUT, POWER FEED ON TABLE, 990 LB TABLE CAPACITY, 5" SPINDLE TRAVEL, 0.0060 SPINDLE POWER FEED PER MINUTE, NEW COST $19,000, 5 HP 440/220/60/3, 70" LR X 80" FB X 100" TALL.
