551 - 600 of 771 listings
Lagun #FTV-2S, 10" x50" tbl., 2 HP, 30" X, 16" Y, 16" Z, R-8 Collet, Mitutoyo PM-32L 2-Axis digital read out, power X-Feed
Champion Machinery Inc | Fort Mill, SC
Seller: Champion Machinery Inc
Location: Fort Mill, SC
Mfr: Lagun
Model: FTV-2S
, Spindle Motor 2 HP, Spindle Speed 60 - 4200 RPM, Spindle Taper R-8, Table Size 50" x 10", X-Axis 30", Y-Axis 16", Z-Axis (Knee Travel) 16", Z-Axis (Quill) Travel 5", s:, MITUTOYO PM-32L 2-Axis Digital Readout, Power X Feed, Hardened and Ground Ways, Two Gear Range Headstock, Manufactured in Spain.
Lagun #FTV-2S, vertical mill, 10" x50" tbl., 3 HP, Anilam Wizard digital read out, R-8, power draw bar, Newall 2-Axis digital read out
Machnet | Santa Monica, CA
Seller: Machnet
Location: Santa Monica, CA
Mfr: Lagun
Model: FTV-2S
Lagun FTV-2S Vertical Machining Center w/ DRO, Lagun FTV-2S Vertical Mill, Anilam Wizard DRO, R8 Spindle Taper, Draw Bar, Quill Handle, Knee Hnadle, Transformer for low voltage supply, Newall 2-Axis Digital Read Out, 220 Volt, 3 Phase.
Lagun #FTV-2S, Vertical Milling Machine, 10" x 50" Table, 4200 RPM, 3 HP, 440 V.,
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lagun
Model: FTV-2S
Table Size 10" X 50" Spindle Speeds 60 - 4,200 RPM Depth Gauge 5 inches Motor 2.2kw, 220/440V, 3PH Dimensions 5 7"W x 5 1"L x 7 4"H Weight 2000 pounds, Spirit II Digital Readout.
Lagun #FTV-2S, vertical mill, 10" x50" tbl., 3 HP, 30" X, 16" Y, 16" Z, 55-4250 RPM, R-8, variable speed head, Newall C80 digital read out
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Lagun
Model: FTV-2S
Table Size 10" x 50" Longitudinal Travel 30'' Cross Travel 16" Vertical Knee Travel 16" Spindle Speeds (Variable) 55- 4250 RPM Spindle Taper R-8 Ram Travel 16" Spindle Quill Travel 5" Spindle Quill Feeds (3) 0.003" - 0.006" - 0.0015" Horsepower 3 H.P. WEIGHT 2850 LBS s Newall C 80 DRo Brand New X Axis Feed Will Be ...more
Lagun #FTV-2S, 10" x50" tbl, Servo II, digital read out, 16" x18" x16", 5" quill, 3 HP, 4250 RPM, #82383
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lagun
Model: FTV-2S
Year: 1990
TABLE SIZE ---------------------------- 10 in FB x 50 in LR, T-SLOT SIZE --------------------------- 5/8 in, T-SLOTS ------------------------------- 3 ON 2-1/2 in CENTERS, X-AXIS TRAVEL ------------------------- 16 in, Y-AXIS TRAVEL ------------------------- 18 in, Z-AXIS TRAVEL ------------------------- 16 in, HEAD: ...more
Get email updates for newly added Bed and Knee Milling Machines - Vertical
Bed and Knee Milling Machines - Vertical (also known as vertical milling machines) are machines that use a vertically oriented spindle to perform precision milling operations. Commonly used in industries like metalworking, automotive, and aerospace, they are ideal for tasks such as drilling, boring, and surface grinding. These machines are essential for creating detailed, high-precision parts and components.
JUST ADDED!
Lagun #FTV-2S, vertical mill, 10" x50" tbl., 30" X, 16" Y, 16" Z, 55-4250 RPM, R-8, power draw bar, variable speed, X-Axis rapid power feed
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Lagun
Model: FTV-2S
Lagun #FTV-2S, vertical mill, 10" x50" table, 60-4200 RPM, 5" gauge depth
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lagun
Model: FTV-2S
Table Size 10" X 50" Spindle Speeds 60 - 4,200 RPM Depth Gauge 5 inches Motor 2.2kw, 220/440V, 3PH Dimensions 5 7"W x 5 1"L x 7 4"H Weight 2000 pounds, * X-AXIS POWER FEED, * KURT VISE, * SPIRIT II DRO.
Lagun #FTV-2S, vertical mill, 10" x 50" table, 3 HP, 30" X, 16" Y, 16" Z, 55-4250 RPM, R-8, Newall C80 2-Axis digital read out, variable speed head
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Lagun
Model: FTV-2S
JUST ADDED!
Lagun #FTV-2S, Vertical Mill, 10" x 50" Table (2 available)
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Lagun
Model: FTV-2S
Inventory No. 0626-158-0002 Manufacturer Lagun Model No. FTV-2S Name Vertical Mill Arrival Date 07-06-2026 Dimensions L x W x H (inches) 72 x 68 x 89 Capacity 10”X50” TABLE Electrical 3/50/60/220/380/440 Weight (lb.) 2260 Category Machine Tools Condition Used Available Quantity 1 Item 2.2 Kw, 1420/1720 ...more
JUST ADDED!
Lagun #FTV-2S, vertical mill, 10" x55.25" tbl., 38" X, 16" Y, 16" Z, 22.4" ram travel, 750 lb. table load, 3 HP, 55-4250 RPM, variable speed head
Machine Tool Bids | Chicago, IL
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Lagun
Model: FTV-2S
Lagun FTV-2S Manual Mill, Lagun FTV-2S, Table size: 55.25 × 10 in (1,403 × 254 mm), X-axis travel: 38.0 in manual (34.6 in with power feed), Y-axis travel: 16.0 in, Z-axis (knee) travel: 16.0 in, Ram travel: 22.4 in, Table load capacity: 750 lb (340 kg), Main motor: 3 HP, Spindle speed: 55–4,250 RPM ...more
Lagun #FTV-4L, vertical mill, 11" x58" table, 1200 lb., #40 taper, powered knee, digital read out, new, 2003
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Lagun
Model: FTV-4L
Year: 2003
LAGUN MDL #FTV-4L VERTICAL MILL, NEW 2003, MANUFACTURER. LAGUN, MODEL NUMBER. FTV-4L, YEAR.2003, TABLE. 58" x 11", CAPACITY. 1,200#, SPINDLE TAPER. 40, TRAVEL LONG. 37-1/2", RAM TRAVEL. 22 3/16", T SLOTS - (3) 5/8" @ 2 ", KNEE TRAVEL. 18", TRAVEL CROSS. 15", POWERED KNEE, DIGITAL READ OUT, 4 HP / 440 / 3 PHASE / ...more
JUST ADDED!
Lagun #FTV-4L, Vertical Mill, 11" x 58" Table, 3 KW, Made In Spain
HGR24 | Euclid, OH
Seller: HGR24
Location: Euclid, OH
Mfr: Lagun
Model: FTV-4L
Inventory No. 0526-111-0002 Manufacturer Lagun Model No. FTV-4L Name Vertical Mill Arrival Date 06-04-2026 Dimensions L x W x H (inches) 75 x 80 x 91 Capacity 11” X 58” Weight (lb.) 4885 Category Machine Tools Condition Used Available Quantity 1 Item 3 Kw, Manuals, Made In Spain.
Lagun #FU2-LA, 10" x 54" table, 1400 RPM, ISO 40 spindle, variable speed head
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Lagun
Model: FU2-LA
Lagun #FVA-5LA, Vertical Milling Machine, 7-3/4" x78-3/4" Table, Geared Head, 50 Taper, 1991
Mullin Machinery | Farmingdale, NJ
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Lagun
Model: FVA-5LA
Year: 1991
Product, Lagun Geared Head Milling Machine, Model FVA-5LA / FVA 2000, New 1991, Spindle- 50 Taper, Spindle Speeds- 28-1400 rpm, Table- 17 3/4″ x 78 3/4″, X-Axis Travels- 55″, Y-Axis Travels- 17″, Knee Travels- 16″, Quill Feed- 5″, Box Way Construction, Currently Wired 480v 3ph ...more
JUST ADDED!
Lagun #MVM-2, Mega Vertical Knee Mill, 4500 RPM, 3 HP, 50" x10" table, 3 t-slots, new
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Lagun
Model: MVM-2
TABLE:, TABLE SIZE 50” X 10” (1,270 X 254 MM) NO. OF T-SLOTS 3 T-SLOT SIZE 2.5" X 0.63” (64 X 16 MM) MAXIMUM WEIGHT ON TABLE 661 LBS (300 KGS) HEAD:, MAIN MOTOR 3 HP (2.2 KW) MECHANICAL INFINITE VARIABLE SPEED 60 ~ 4,500 RPM LOW (60 ~ 500 RPM) HIGH (500 ~ 4,500 RPM) HEAD SWIVEL (LEFT & RIGHT) ...more
Lagun, ram type vertical mill, 9" x42" table, 2 HP, Mini Wizard 2-Axis digital read out, one shot lube
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lagun
SERIAL., MODEL., TABLE SIZE. 9" X 42", LONGITUDINAL TRAVEL. 29-1/2", CROSS TRAVEL. 16", KNEE VERTICAL TRAVEL. 16", RAM TRAVEL. 12", SPINDLE TAPER. R-8, SPINDLE SPEEDS, VARIABLE. 75 TO 4640 RPM, QUILL DIAMETER. 3-3/8", FEEDS. (3).003/.0015/.006, LONGTUDINAL SERVO FEED. YES, 2 AXIS DIGITAL READOUT. MINI WIZZARD, POWER ...more
Lagun, vertical mill, 2 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lagun
SERIAL. SE19647, MODEL. FTV-1S, AREA OF TABLE. 44" X 9", LONGITUDINAL TABLE TRAVEL. 30", CROSS TABLE TRAVEL. 16", VERTICAL KNEE TRAVEL. 16", RAM TRAVEL. 22-3/16", QUILL TRAVEL. 5", SPINDLE SPEEDS (VARIABLE). 55 TO 4200 RPM, SPINDLE TAPER. R-8, SPINDLE FEEDS.0015 -.003 -.006 IPR, 1 SHOT LUBE. YES, MOTOR. 3 HORSEPOWER.
Lilian #5VH, 10" x50" table, 5 HP, Heidenhain, 3-Axis, digital read out
Platinum Asset Services | Scarborough, ON
Seller: Platinum Asset Services
Location: Scarborough, ON
Mfr: Lilian
Model: 5VH
Year: 2004
LILIAN, 5VH, 10" X 50", TURRET MILL, 5 HP, HEIDENHAIN, 3-AXIS, DIGITAL READOUT, LILLIAN, 5VH, 10" X 50", TURRET MILL, 5 HP, DRO.
Lincoln #2SHG, knee mill, 9" x42" table, 3 HP, 60-4200 RPM, MillMate 2-Axis readout, 1994
Westbrook Engineering Co | Warren, MI
Seller: Westbrook Engineering Co
Location: Warren, MI
Mfr: Lincoln
Model: 2SHG
Year: 1994
LINCOLN 2SHG Knee Mill, 1994 model, with 9"x42" table, 30" longitudinal travel, 16" cross travel, 3 HP motor, and R8 spindle taper. s include MillMate 2-axis readout and one-shot lube system. Ideal for precise milling tasks., Brand: Lincoln, Model: 2SHG, Table: 9: x 42", Longitudinal table travel: 30", Cross table ...more
Lincoln #3KHD, ram type vertical mill, 10" x50"table, 3 HP, R-8, 1 shot lube, power draw bar, 1990
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lincoln
Model: 3KHD
Year: 1990
SERIAL. 901120MODEL. 3KHDYEAR. 1990TABLE AREA (T-SLOTTED). 50" X 10"LONGITUDINAL TABLE TRAVEL. 36"CROSS TABLE TRAVEL. 16"VERTICAL TABLE TRAVEL. 16"RAM TRAVEL. 20"SPINDLE SPEEDS (VARIABLE). 60 TO 4200 RPMSPINDLE TAPER. R-8SPINDLE FEEDS.0015,.003,.006 IPRQUILL DIAMETER. 3-3/8"QUILL STROKE. 5"LONGITUDINAL SERVO TABLE ...more
Magnum-Cut #3VS, vertical milling machine, 10" x54" table, 3 HP, one shot lube, new
Trader Machinery Inc | Concord, ON
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Magnum-Cut
Model: 3VS
10" X 54"37"17"16.5"R860 - 4000 RPM5"3 HP575V/3/602,650 LBS.
Magnum-Cut #4VS, 10" x54" table, 5 HP, ISA 40, one shot lube, Meehanite castings, new
Trader Machinery Inc | Concord, ON
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Magnum-Cut
Model: 4VS
10" X 54"35.9"17"16.5"5 HPISA 4060 - 3800 RPM5".0015" -.006"90 DEG.45 DEG.3,000 LBS.
Manford #L-2V, Vertical Turret Mill, 49" x 9" table, 37" X, 12" Y, 16" Z, 3 HP, 4500 RPM, 2024
Harris Machine Tools, Inc. | Houston, TX
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Manford
Model: L-2V
Year: 2024
Table Size: 9" x 49", T-Slots: (3) 5/8", Table Longitudinal Travel: 37", Table Cross Travel: 12", Knee Vertical Travel: 16", Ram Travel: 15", Quill Travel: 5", Spindle Nose to Table: 1.3" - 17.3", Turret Swivel: 360 Deg., Head Swivel (L-R): +/- 45 Deg., Head Tilt (Up-Down): +/- 45 Deg., Spindle to Column: 6" - 21.4" ...more
Manford #L-2V, Vertical Turret Mill, 49" x 9" table, 37" X, 12" Y, 16" Z, 3 HP, 4500 RPM, 2024
Harris Machine Tools, Inc. | Houston, TX
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Manford
Model: L-2V
Year: 2024
"Table Size","9" x 49"",""; "Table Travel Longitudinal","37","inches"; "Table Travel Cross","12","inches"; "Vertical Knee Travel","16","inches"; "Ram Travel","15","inches"; "Quill Travel","5","inches"; "Max Distance Spindle To Table Top","1.3" - 17.3"",""; "Turret Rotation","360 Deg.",""; "Head Swivel","(L-R) +/- 45 ...more
Manford #L-2V, Vertical Turret Mill, 49" x 9" table, 37" X, 12" Y, 16" Z, 3 HP, 4500 RPM, 2024, (3 available)
Harris Machine Tools, Inc. | Houston, TX
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Manford
Model: L-2V
Year: 2024
Table Size: 9" x 49", T-Slots: (3) 5/8", Table Longitudinal Travel: 37", Table Cross Travel: 12", Knee Vertical Travel: 16", Ram Travel: 15", Quill Travel: 5", Spindle Nose to Table: 1.3" - 17.3", Turret Swivel: 360 Deg., Head Swivel (L-R): +/- 45 Deg., Head Tilt (Up-Down): +/- 45 Deg., Spindle to Column: 6" - 21.4" ...more
Manford #SP-150VS-Meehanite, vertical mill, 9" x49" tbl., 3 HP, R8, variable speed, X-Axis automatic feed
FMI Trading LLC | Vinton, TX
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Manford
Model: SP-150VS-MEEHANITE
Maximart #2VS, vertical mill, 9" x49" table, 3 HP, R-8, one shot lubrication system, new, #3472
Trader Machinery Inc | Concord, ON
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Maximart
Model: 2VS
9" x 49"38"14"14"R-875 - 4,350 RPM5"3 HP575V/3/602,100 LBS.
Maximart #2VS, Vertical Milling Machine, 9" x 49" table, 32.9" X, 12" Y, 5" quill travel, 15-3/4" vertical knee travel, 3 HP, 4300 RPM, 575 Volt, 2-axis Fagor digital read out
Trader Machinery Inc | Concord, ON
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Maximart
Model: 2VS
9" x 49"32.912"5"15-3/4"R-83 HP575V/3/6060 - 4,300 RPM2,250 LBS.
Meehanite #100-1949/TURN-PRO, vertical mill, 49" x9" T-slot servo power table, 60-4200 RPM, 1998
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Meehanite
Model: 100-1949/TURN-PRO
Year: 1998
49" x 9" T-SLOT SERVO POWER TABLE, VARIABLE SPEED HEAD, (60-4200 RPM), * ANILAM WIZARD 350 PLUS X & Y DRO, * TOOLING COLLET SETS.
Meehanite #100-1949/Turn-Pro, vertical mill, 9" x49" servo power table, Anilam Wizard, 1998
Turners Machinery Inc | Santa Paula, CA
Seller: Turners Machinery Inc
Location: Santa Paula, CA
Mfr: Meehanite
Model: 100-1949/TURN-PRO
Year: 1998
9" X 49" TURN-PRO 100-1949 BRIDGEPORT TYPE VERTICAL MILL, MAKE: TURN-PRO, MDL: 100-1949, S/N: 972055, YR: 1998, 49" X 9" SERVO POWER TABLE, VARIABLE SPEED HEAD, (60-4200 RPM), ANILAM WIZARD, VISE, MACHINE DIMS: 64"LE, X 60"FB, X 85"H, APPROX WEIGHT: 3000 LBS, PRICE: $3,500.00, ***PURCHASED FROM AN INSURANCE COMPANY ...more
Mighty Comet #3VHG, vertical mill, 9" x42" tbl., 3 HP, 12" X, 28" Y, 16" Z, 60-4200 RPM, R-8, Sony 2-Axis digital read out, power draw bar, X-Axis power feed
Greenway & Associates Ltd | Orange City, IA
Seller: Greenway & Associates Ltd
Location: Orange City, IA
Mfr: Mighty Comet
Model: 3VHG
, 1 axis Sony DRO, Power draw bar, X axis power feed, One shot lubrication.
Millport #2, Vertical Mill, 9" x 42" Table, 5440 RPM, 18-3/4" Throat, 2 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Millport
Model: 2
SERIAL. 90119, MODEL. 2, AREA OF TABLE. 9" X 42", SPINDLE SPEEDS. 80 TO 5440 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 16", QUILL TRAVEL. 5", DEPTH OF THROAT. 6-3/4" TO 18-3/4", SPINDLE TAPER. R-8, CHROME WAYS. YES, ONE SHOT LUBE. YES, MOTOR. 2 ...more
Millport #2S, vertical turret milling machine, digital read out
Perfection Global | Elk Grove Village, IL
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Millport
Model: 2S
Millport 2S, DRO.
Millport #4VH, vertical ram type mill, 9" x42" table, 2 HP, R-8, one shot lube, 1986, #74637
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Millport
Model: 3VH
Year: 1986
SERIAL. 6102, MODEL. 3VH, YEAR NEW. 1986, AREA OF TABLE. 9" X 42", SPINDLE SPEEDS (VARIABLE). 60 TO 4250 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 16", QUILL TRAVEL. 5", POWER LONGITUDINAL FEED. SERVO, POWER CROSS FEED. SERVO, DEPTH OF THROAT. ...more
Milltronics #Partner-IV-Series-B, Vertical Milling Machine, 13" width x 42" L Table, 32" X, 16" Y, 800 lb. Load capacity, 4000 RPM, CAT40 Taper, 1989
Machine Tool Bids | Chicago, IL
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Milltronics
Model: PARTNER IV SERIES B
Year: 1989
Used 1989 Milltronics Partner IV. Machine Tool Bids offers plenty of Vertical Machining Centers and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Milltronics Partner IV or any of our machines., MACHINE, Table Dimensions: W x L - 13" x 42", X Axis Table ...more
Milltronics #VMM3612, vertical mill, 9" x49" T-slotted table, 3 HP, electronic speed Control, 2005
Belmont Machinery Co | Aurora, IL
Seller: Belmont Machinery Co
Location: Aurora, IL
Mfr: Milltronics
Model: VMM3612
Year: 2005
Size 9"x49" Make MILLTRONICS Year 2005, ONE USED - MILLTRONICS VERTICAL KNEE MILL, Model: VMM3612, Serial Number: 1083, New 2005, 9” x 49” T-Slotted Table, Spindle Speeds from 60 to 4200 RPM, Electronic Speed Control, R-8 Spindle, Power Draw Bar, Chrome Ways, Bijur One Shot Lube System, Power Feed on X and ...more
Milwaukee #K-3, vertical milling machine, 12" x56" table
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Milwaukee
Model: K-3
12" x 56" table size, Machine Type.Millers, Vertical Manufacturer.MILWAUKEE Model.MODEL K NO.3 Year.N/A Condition.Not specified.
JUST ADDED!
MSC #10x54, Manual Vertical Knee Mill, 36" X, 16" Y, 15" Z, 10" x 54" table, 18" ram travel, 3 HP, 60-4250 RPM, 4-axis Acu-Rite digital read out, 220 Volt, 1999
Naab Sales Corporation | Blaine, MN
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Msc
Model: 10X54
Year: 1999
Here We Have:, Absolutely Loaded MSC 10×54 Vertical Mill, W/ 4- Axis Acu-Rite DRO X,Y,(Z Quill),Knee! Kurt Power Draw Bar, Power Feed, X,Y,Knee, Make: MSC, Model 10×54, Serial Number:490084, New in: 1999, Table Length: 54”, Table Width: 10”, Minimum Spindle Speeds: 60- 4250 (RPM), Cross Travel: ...more
JUST ADDED!
MSC #951710, vertical mill, 9" x42" tbl., 2 HP, 30" X, 13" Y, 16" Z, 78-4800 RPM, NMTB-30, new digital read out, servo X/Y/knee power feed, 230 V.
Machinery Central | Louisville, KY
Seller: Machinery Central
Location: Louisville, KY
Mfr: Msc
Model: 951710
Spec Sheet:, MSC Model 951710 Vertical Knee Mill, NEW DRO, Servo PF X/Y/Knee, Brand: MSC, Model: 951710, Type: Vertical Knee Mill, Serial Number: 761174, Capacity & Table Travels, Table Size: 9'' × 42'', Longitudinal Travel (X-Axis): 26'' - 30'', Cross Travel (Y-Axis): 12'' - 13'', Vertical Knee Travel ...more
MSC vertical mill, 9" x42" table
Peterson Machinery Sales | Casa Grande, AZ
Seller: Peterson Machinery Sales
Location: Casa Grande, AZ
Mfr: Msc
9"x42" MSC vertical milling machine, variable speed, ready to go..
NASA #NASA-II, CNC Vertical Knee Mill, 42" x 12" table, 12" X, 27" Y, 5 HP, 3500 RPM, Fagor 8020 CNC, 1988
Star Equipment Co., Inc. | Utica, MI
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Nasa
Model: NASA II
Year: 1988
3-axis CNC knee mill, has X 27" x Y 12' x Z 5" (quill travel), Manual knee moves 12", Fagor 8020 MS w/graphics control, SEM DC servos, Setup for Renishaw MP1s probe (no probe), Has spindle brake (w/air), CNC controlled coolant pump w/sump in base, 1988 NASA NASA II, Table-W. 12", Table-L. 42", Travel-Long. 12" ...more
OKK #MDH-5V, 18-1/8" x96-15/32" table, 30 HP, #50 taper, power draw bar, coolant system, 1967
Cleveland Machinery Sales Inc | Cleveland, OH
Seller: Cleveland Machinery Sales Inc
Location: Cleveland, OH
Mfr: Okk
Model: MDH-5V
Year: 1967
1967 OKK MDH-5V, Table-W. 18.125", Table-L. 96.468", Travel-Long. 51.188", Travel-Cross. 15.75", Power. 30 hp, RPM. 1,800 RPM, Taper. 50, 18 1/8" X 96 15/32" TABLE, 23 SPINDLE SPEEDS 18 - 1800 RPM, 32 FEEDS 3/8-84 IPM ,VERT 1/4 OF SAME, RAPID FEED, 51 3/16" X TRAVEL, 15 3/4" Z (KNEE) TRAVEL, 15 3/4" Y TRAVEL, 5 7/8" ...more
OKK #MDH-5V, vertical mill, 18" x96" table, 30 HP, #50 NS, power draw bar, #76388
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MDH-5V
SERIAL. 819, MODEL. MDH-5V, WORKING SURFACE OF TABLE. 96" X 18"0 RPM, SPINDLE SPEEDS. (23) 18 TO 1800 RPM, LONGITUDINAL & CROSS FEEDS. 3/8 TO 84 IPM, VERTICAL FEEDS. (32) 1/8 TO 84 IPM, LONGITUDINAL TRAVEL. 51-1/8", CROSS TRAVEL. 15-3/4", VERTICAL TRAVEL OF KNEE. 15-3/4", VERTICAL HEAD TRAVEL. 5-7/8", SPINDLE NOSE ...more
OKK #MH-2V, vertical milling machine, 12" x52" table, #50NS, power draw bar, coolant, 7.5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MH-2V
SERIAL. 1610, MODEL. MH2V, AREA OF TABLE. 52" X 12", SPINDLE SPEEDS. (12) 60 TO 1800 RPM, LONGITUDINAL & CROSS FEEDS. (12) 7/16" TO 69 IPM, VERTICAL HEAD FEEDS. (12) 40 PERCENT OF ABOVE, LONGITUDINAL TRAVEL. 28-3/8", CROSS TRAVEL. 10-1/4", VERTICAL TRAVEL OF HEAD. 14-1/4", SPINDLE TO TABLE CENTER. 1/2" MIN. TO ...more
OKK #MH-3V, vertical milling machine, 14-1/4" x65" table, 3-Axis, power feeds, automatic lube, #50NS
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MH-3V
SERIAL. 312, MODEL. MH-3V, TABLE SIZE. 65" x 14 1/4", LONGITUDINAL TRAVEL. 36-1/4", SADDLE CROSS TRAVEL. 11-3/4", SPINDLE SPEEDS. 19 TO 1900 RPM (24), TABLE FEEDS. (12) 1/2 TO 86 1/4 IPM, VERTICAL FEEDS. (12) 1/5 TO 34 1/2 IPM, POWER RAPID TRAVERSE. 125 IPM, VERTICAL TRAVEL OF HEAD. 15-3/4", SPINDLE TO TABLE. 3-1/8" ...more
OKK #MH-3V, vertical mill, 14-1/4" x65" table, coolant system, automatic lube, digital read out, #50 NS, #75084
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MH-3V
SERIAL. 4118, MODEL. MH-3V, TABLE SIZE. 65" x 14 1/4", LONGITUDINAL TRAVEL. 36-1/4", SADDLE CROSS TRAVEL. 11-3/4", SPINDLE SPEEDS. 19 TO 1900 RPM (24), TABLE FEEDS. (12) 1/2 TO 86 1/4 IPM, VERTICAL FEEDS. (12) 1/5 TO 34 1/2 IPM, POWER RAPID TRAVERSE. 125 IPM, VERTICAL TRAVEL OF HEAD. 15-3/4", SPINDLE TO TABLE. 3-1/8" ...more
OKK #MH-3V, vertical milling machine, 65" x14-1/4" table, automatic lube, coolant, #50NS
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MH-3V
SERIAL. 421, MODEL. MH3V, TABLE SIZE. 65" x 14-1/4", LONGITUDINAL TRAVEL. 36-1/4", CROSS TRAVEL. 11-3/4", SPINDLE SPEEDS. 45 TO 1500 RPM (24), TABLE FEEDS. (12) 1/2 TO 86-1/4 IPM, VERTICAL FEEDS. (12) 1/5 TO 34-1/2 IPM, POWER RAPID TRAVERSE. 125 IPM, VERTICAL TRAVEL OF HEAD. 15-3/4", SPINDLE TO TABLE. 3-1/8" TO ...more
OKK #MH-4V, bed type vertical mill, 17-3/4" x78-3/4" table, 3 HP, Acu-Rite 3-Axis digital read out, power draw bar, 8" Kurt vise, 1981
Hildebrand Machinery Co Inc | York, PA
Seller: Hildebrand Machinery Co Inc
Location: York, PA
Mfr: Okk
Model: MH-4V
Year: 1981
OKK BED TYPE VERTICAL MILL, PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $24,500.00, HMC Stock # 21247-P, Machine Serial No.: MA59519X, Machine Model No.: MH-4V, Manufacture No.: 666, New Date: 1981, Table Size: 78-3/4" x 17-3/4", (3) T-Slots: 13/16", Longitudinal Travel: 43-1/4" ...more
OKK #MH-4V, vertical mill, 17" x78" tbl., 43.25" X, 16.5" Y, #50, power draw bar
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Okk
Model: MH-4V
SERIAL.: 748, MODEL.: MH-4V, TABLE SIZE.: 17" X 78", LONGITUDINAL TRAVEL.: 43-1/4", CROSS TRAVEL.: 16-1/2", TABLE FEEDS.: (16) 3/8 TO 66 IPM, POWER RAPID TRAVERSE.: 125 IPM, HEAD VERTICAL TRAVEL.: 19-5/8", HEAD VERTICAL FEED RATE.:.150 TO 26.4 IPM, DISTANCE SPINDLE NOSE TO TABLE.: 4" TO 23-5/8", DISTANCE SPINDLE ...more
OKK #MH-5VI, bed type vertical mill, 17-3/4" x88-1/2" table, 25 HP, automatic lube system, 1981, #75420
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Okk
Model: MH-5VI
Year: 1981
SERIAL. 598, MODEL. MH-5VJ, MFG #. MA59465X, YEAR NEW. 1981, WORKING SURFACE OF TABLE. 88-1/2" X 17-3/4", SPINDLE SPEEDS. 22 TO 1400 RPM, LONGITUDINAL FEEDS. 3/8 TO 66 IPM, CROSS FEEDS. 3/8 TO 66 IPM, VERTICAL FEEDS. 1/8 TO 22 IPM, LONGITUDINAL TRAVEL. 51-1/4", CROSS TRAVEL. 16-1/2", VERTICAL TRAVEL OF HEAD. 19-5/8" ...more
