Buy or Sell Your 500 Ton Press Brake
AI-ranked results for 500ton press brake - closest matches first
155 Ton, U.S. Industrial #USHB155-10, CNC hydraulic press brake, 10' overall, 106.2" between housing, 5.9" stroke, 12.5" throat, 2.75" adj., 16.3" open, 2026, new
Ex-Factory | Charlotte, NC
Category: CNC Press Brakes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: U.S. Industrial
Model: USHB155-10
Year: 2026
US INDUSTRIAL USHB155-10 CNC Hydraulic Press Brake: -- Working Pressure 155 tons -- Length of work table 126 -- Distance between housings 108.4" -- Throat depth 12.6" -- Stroke 5.12" -- Adjustment 3.35" -- Open Height 14.96" -- Rapid approach speed 2.4"/Sec -- Rapid retract speed 2.76"/Sec -- Pressing speed dependent ...more
75 Ton, Minster #7, OBI press, 6" stroke, 19" Shut Height, 4" ram adj., 40 SPM, 36" x24"bed, air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: 7
6" STROKE, 4" RAM ADJUSTMENT, 19" SHUTHEIGHT, 40 SPM, 36" X 24" BED, CUSHION, T SLOTS IN RAM AND BOLSTER, PALM BUTTONS, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE.
250 Ton, Niagara #E-250, OBI press, 12" stroke, 22" Shut Height, air clutch & brake, 27 SPM
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Niagara
Model: E-250
MODEL #: E-250, SERIAL #: 51238, 12" STROKE, 22" SHUT HEIGHT, 6" POWERED RAM ADJUSTMENT, 27 SPM, 58" x 34" BED, 36" x 28" RAM, AIR CLUTCH & AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, T SLOTTED RAM AND BOLSTER, 480 V, 3 PH, GOOD CONDITION.
200 Ton, U.S. Industrial #USHB200-10, CNC hydraulic press brake, 10' overall, 102.3" between housing, 2.75" stroke, 12.5" throat, 17.5" open, 24" Back Gauge, 20 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: CNC Press Brakes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: U.S. Industrial
Model: USHB200-10
Year: 2026
US INDUSTRIAL USHB200-10 CNC Hydraulic Press Brake: -- Working Pressure: 200 Tons -- Length of Working Table: 125.9". -- Distance Between Housings: 102.3" -- Throat Depth: 12.5" -- Stroke Adjustment of Ram: 2.75" -- Ram Travel: 7.0" -- Open Height: 17.5" -- Rapid Ram Travel Speed: 2.4"/sec. -- Rapid Ram Retreat Speed: ...more
75 Ton, Bliss #C75, OBI press, 4" stroke, 3.5" adj., 36" x 24" bed, air clutch & brake, 1968, #11499
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Bliss
Model: C75
Year: 1968
(1) Used 75 Ton Bliss Geared OBI Press, Capacity: 75 Ton, Stroke: 4, Slide Adjustment: 3 1/2, Shut Height: 17 1/2, Speed: 80 SPM (To Be Verified), Bed Area: 36LR x 24 FB, Bolster Area: 34LR x 24"FB x 3" Thick, Drilled & Tapped, Slide Area: 23 LR x 18 FB, Air Clutch & Brake, Air Cushion, 10 HP Variable Speed ...more
300 Ton, Minster Hevi Stamper #E2-300-84-48, straight side double crank press, 12" stroke, 30" Shut Height, 6" adj., 80 SPM, 84" x48"bed, 27" windows, OmniLink LCD, air clutch & brake, 1984
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: E2-300-84-48
Year: 1984
(1) Used 300 Ton Minster E2-300-84-48 Hevi Stamper Straight Side Double Crank Press, Capacity: 300 Ton, Bed Area: 84" lr x 48" fb, Stroke: 12", Adjustment: 6", Shut Height: 30" over bed (slide down adjustment up), Bolster Thickness: 6", Approx Floor to Top of Bolster: 50" (Sitting on Vibro Mounts), Speed 0 - 80 SPM ...more
190 Ton, Accurpress #Accell-519014, CNC hydraulic press brake, Vision CNC Control, 14' overall, 154" between housing, 2011
Prestige Equipment Corp | Melville, NY
Category: CNC Press Brakes
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Accurpress
Model: ACCELL-519014
Year: 2011
CAPACITY:, Tonnage Capacity: 190 Ton, Overall Length of Bed and Ram: 168", Distance Between Housings: 154", Stroke Length: 14", Open Height: 22", Throat Depth: 16", Motor: 30 HP, Approach Speed: 340 IPM, Bending Speed: 24-48 IPM, Return Speed: 280 IPM, Approximate Dimensions: 186" x 82" x 120" H, Approximate Shipping ...more
110 Ton, Scotchman #Propress-110W, hydraulic wide H-frame press, 15" stroke, #3014002
Vander Ziel Machinery Sales | Alto, MI
Category: H Frame Hydraulic Press Machines
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Scotchman
Model: PROPRESS-110W
Scotchman 110 Ton Hydraulic Wide H-Frame Press, Model ProPress 110W, SKU # 3014002, Capacity 100 Tons, Motor 3 HP, RPM 3000, Ram Speed – Approach 17 ipm, Ram Speed – Press 5 ipm, Ram Speed – Return 21 ipm, Open Height, Minimum 5”, Open Height, Maximum 34 3/4”, Stroke 15”, Lateral ...more
220 Ton, Aida #NCI-2000(2)E, single crank gap frame press, 9.84" stroke, 17.72"Shut Height, 4.33"adj., 25-50 SPM, air clutch & brake, 2009
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Aida
Model: NCI-2000E
Year: 2009
ORDER 220, 220 Ton Aida Gap Press, Model NCI 2000(2)E, s/n C420-0670, 9.84” stroke, 4.33" Ram Adjustment, 17.72” Shut height, 25-50 SPM, 34.6" x 25.6” Ram, 54.7" x 33.1" Bed, Air Clutch and Brake, Air Counterbalance, Hydraulic Overloads, Hydraulic die clamping, NEW 2009.
75 Ton, Bliss #C75, OBI press, 4" stroke, 15" Shut Height, 3.5"ram adjustment,air clutch & brake,S45213
Perfection Global | Elk Grove Village, IL
Seller: Perfection Global
Location: Monclova, OH
Mfr: Bliss
Model: C75
Capacity: 75 TonStroke: 4"Shut Height: 15"Ram Adjustment: 3.5"Speed: 50-100 SPMBed: 36" x 24"Ram: 24" x 19", Air ClutchAir BrakeAir CounterbalancesPalm Buttons.
27 Ton, L & J #27, OBI press, 1" stroke, 10.5" Shut Height, 2" adj., air clutch & brake, 150 SPM
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: L & J
Model: 27
MODEL #: 27, SERIAL #: 35652A, 1" STROKE, 2" RAM ADJUSTMENT, 10.5" SHUT HEIGHT, 150 SPM ESTIMATED, 21-1/2" x 13" BED, 16" x 10" RAM, AIR CLUTCH & BRAKE, RECIRCULATING LUBE SYSTEM, PALM BUTTONS, 40" x 48" x 98" TALL DIMENSIONS, 4500 LBS APPROXIMATE WEIGHT, GOOD CONDITION.
88 Ton, Komatsu #0BS-80-3, single crank gap frame press, 5.12" stroke, 13.78" Shut Height, 3.15" adj., 37-75 SPM, 39.37" x23.62" bed, air clutch & brake, 1989
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Komatsu
Model: 0BS-80-3
Year: 1989
ORDER 45, 5.51" STROKE, 2.36" RAM ADJ., 13.77" SHUT HEIGHT OVER BOLSTER, 40-80 SPM, 15.75" X 13.77" RAM, 31.50" X 17.71" BED, 2005, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, HYDRAULIC OVERLOAD, PALM BUTTONS, 53" X 70" X 96" T APPROX., 8000 LBS APPROX..
110 Ton, Bliss #C-110, OBI Press, 6" stroke, 19" Shut Height, 20-40 SPM, 42" x 27" bed,air clutch, 1979
Alma Machinery Co-Columbia TN | Columbia, TN
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Bliss
Model: C-110
Year: 1979
CAPACITY110 TON STROKE6" MAX SHUT HEIGHT TO BED19" SDAU BED AREA42" X 27" (rl x FB) SPEED20 - 40 SPM VARIABLE SLIDE ADJUSTMENT4" MOTORIZED SLIDE AREA28.25" RL X 23" FB BOLSTER PLATE3.5" H X 42" RL X 27" FB (SOLID) DIST UPRIGHTS / FLOOR TO BED24" / 35.75" CLUTCHBLISS AIR CLUTCH / BRAKE COMBINATION ELECTRICS20 HP 1750 ...more
150 Ton, Enerpac, H-Frame hydraulic shop press, electric, 13" stroke, 48.5" daylight, 10000 psi, 48" bed width
Mullin Machinery | Farmingdale, NJ
Category: H Frame Hydraulic Press Machines
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Enerpac
Product Enerpac 150 Ton H-Frame Hydraulic Shop Press, Maximum Operating Pressure (psi)-10,000 Capacity –150 Tons Maximum Vertical Daylight –48.5″ Maximum Bed Width –48″ Power Source Type-Electric Cylinder Model Number-RR20013 Cylinder Type-Double-Acting, Hydraulic Return Cylinder ...more
90 Ton, Minster #8, OBI press, 6" stroke, 16" Shut Height, 4" ram adj., 37 SPM, air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: -8
Model: 8, Serial #: 11054, 6" Stroke, 16" Shut Height, 4" Ram Adjustment, 37 SPM, 40" x 26" Bed, Air Clutch & Brake, Palm Buttons, Back Geared, Air Counterbalance, Motor: 8 HP, 220/440/60/3, Good Condition.
45 Ton, Bliss #C45, OBI flywheel press, 3" stroke, 12.25" Shut Height, 3" ram, 29.5"x18"bed,air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: C45
MODEL #: C-45, SERIAL #: 62933, 3" STROKE, 12-1/4" SHUT HEIGHT, 3" RAM ADJUSTMENT, 90 SPM, 29.5" x 18" BED, 14" x 9" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, 5 HP 230/460, 60" LR x 74" FB x 107" TALL, 8500 LBS ESTIMATED WEIGHT, GOOD CONDITION.
55 Ton, Niagara #HD-55-6-8, hydraulic press brake, 10' overall, 78" between housing, 7" stroke, 8-1/4" throat, 10 HP
National Machinery Exchange | Newark, NJ
Category: Hydraulic Press Brakes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Niagara
Model: HD-55-6-8
55 TON X 10' NIAGARA HYD. PRESS BRAKE, MODEL HD-55-6-8, CAPACITY:. 55 TONS, BENDING CAPACITY:. 12 GA X 8', DIE OPENING:. 7/8", DISTANCE BETWEEN HOUSINGS:. 6'6", OVERALL LENGTH:. 10', STROKE:. 7", OPEN HEIGHT:. 15", CLOSED HEIGHT:. 7", THROAT:. 8-1/4", TYPE OF DRIVE:. 3 SPEED, RAPID ADVANCE SPEED:. 110 ...more
88 Ton, Stamtec #G1-80, single crank gap frame press, 5.91" stroke, 13" Shut Height, 3.15"ram adj., 35-80 SPM, 39.37" x 21.65"bed, air clutch & brake, 1999
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Stamtec
Model: G1-80
Year: 1999
ORDER 88, 5.91" STROKE, 3.15" POWERED RAM ADJUSTMENT, 13" SHUT HEIGHT OVER BOLSTER, 35-80 SPM, 22.05" X 16.54" RAM, 39.37" x 21.65" BED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, HYDRAULIC OVERLOAD, PALM BUTTONS, 1999, LIGHT CURTIANS.
150 Ton, Niagara #E-150, OBI press, 10" stroke, 26" Shut Height, 6" adj., 27 SPM, 50" x30"bed, air clutch & brake, 1982
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Niagara
Model: E-150
Year: 1982
MODEL #: E-150, SERIAL #: 52221, 10" STROKE, 26" SHUT HEIGHT, 6" POWER RAM ADJUSTMENT, 27 SPM, 50" x 30" BED, 34" x 24" RAM, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, T SLOTTED RAM AND BOLSTER, 1982, GOOD CONDITION.
600 Ton, Pacific #K600-22, 22' overall, 242" between housing, 12" stroke, 50 HP, Hurco Auto-Bend 7 CNC, #44397
Prestige Equipment Corp | Melville, NY
Category: Hydraulic Press Brakes
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Pacific
Model: K600-22
S:, Hurco Auto-Bend 7 CNC Control, Pedestal Control with Palm Buttons, Three Speed Hydraulic Power Unit, Electric Foot Switch Controls, Tonnage Capacity. 600 Ton, Overall Length Of Bed & Ram. 22', Distance Between Housings. 20'2", Bed Width. 10", Throat Depth. 14", Stroke Length. 12", Open Height. 22", Closed ...more
50 Ton, Betenbender #5014, Hydraulic C-Frame Press, 8" L Stroke, 14" D x 18" H Throat, 38" x 18" Bed, 10 HP, 220 V, new
Norman Machine Tool Ltd | Baltimore, MD
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Betenbender
Model: 5014
Betenbender HMI 50 Ton Hydraulic C-Frame Press, Inventory # 6902, Model: 5014, Made in USA, Tonnage Capacity: 50 Tons, Length of Stroke: 8″, Throat Depth: 14″, Throat Height: 18″, Net Daylight: 14″, Open Height: 12″, Shut Height: 7″, Bed Size: 38″ x 18″, Floor to Press ...more
60 Ton, Minster #6, OBI Stamping Press, 20" x 30" Bed, 60-90 SPM, 5 HP, 1989
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Minster
Model: 6
Year: 1989
Bed W20 inchesBed L30 inches, SERIAL. 6-12354, MODEL. #6, CAPACITY. 60 TONS, BED. 20" X 30", PRESS TYPE. FLYWHEEL, CONTROLS PALM BUTTONS. YES, CLUTCH & BRAKE. AIR, VARIABLE SPEED REEVES DRIVE. 60 TO 90 SPM, MOTOR. 5 HP.
80 Ton, South bend / South Bend #80-BG-AC, OBI Press, 4" Stroke, 15.54" Shut Height, 44 SPM, 16.25" x 13.25" Bed, Air Clutch & Brake, 1982
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: South Bend
Model: 80-BG-AC
Year: 1982
ORDER 80, 4" STROKE, 15.5" SHUT HEIGHT, 3.5" RAM ADJUSTMENT, 44 SPM, 16.25" X 13.25" RAM, 36" X 24" BED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, BACK GEARED, 1982.
7 Stand, Yoder #M1.5, Roll Forming Line, 1.5" arbor, 12" roll space, 11" horizontal center, 7" vertical center
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Yoder
Model: M1.5
7 STAND YODER M1.5 ROLL FORMING LINE, CURRENTLY TOOLED FOR CABINET RACK INDUSTRY, CONSISTING OF:, 2500 LBS LITTEL UNCOILER, CAPACITY - 2500 LBS, WIDTH - 12", ID RANGE - 16"-20", 32 TON MINSTER #4 OBI PRE-PUNCH PRESS, MODEL NUMBER - 4, TONNAGE - 32, STROKE - 4", SLIDE ADJUSTMENT - 2", AIR CLUTCH, FLYWHEEL, 7 STAND ...more
200 Ton, Niagara #E250, gap frame press, 10" stroke, 21" Shut Height, 6" slide adj., 32 SPM, air clutch & brake
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Niagara
Model: E250
SERIAL. 52169 MODEL. E-250 CAPACITY. 250 TONS STROKE. 10" SHUT HEIGHT. 21" SLIDE ADJUSTMENT. 6" STROKES PER MINUTE. 32 SPM, SLIDE AREA. 36" LR X 28" FB BED AREA. 58" LR X 34" FB CONTROLS. INCH, SINGLE, CONTINUOUS, AIR CLUTCH AND BRAKE. YES, Machine Type.Presses, Gap Frame (OBS) Manufacturer.NIAGARA Model.E-250 ...more
400 Ton, Chicago #SS400, straight side double crank, 8" stroke, 18" Shut Height, 120" x36" bed, 10-30 SPM, under power
Alma Machinery Co-Columbia TN | Columbia, TN
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Chicago
Model: SS400
CAPACITY 400 TON Location This used press is located in our Columbia, TN Warehouse.
300 Ton, Pacific #300PF-II, hydraulic gap frame press, 20" stroke, 37" daylight, 16" throat, 1976 (2 available)
Westway Machinery Ltd | Mississauga, ON
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Pacific
Model: 300PF-II
300 TON capacity, MODEL 300 PF II, S:, “T” Slotted Ram + BolsterPalm Buttons.
50 Ton, Macrodyne #MPZ-50, 4-post hydraulic press, 20" stroke, 36" daylight, 72" x 30" bed, 16" Shut Height, Panelview 600 Control, 2008
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Macrodyne
Model: MPZ-50
Year: 2008
This 50 Ton Macrodyne Press is a 4 Post Down Acting Hydraulic Press, Top Mounted Hydraulics, 72"L-R x 30"F-B bed, 20" of Stroke with 30" of Daylight Opening. The press was built new in 2008., Pressing Force: 50 Ton, Maximum Return Force: 1.5 Ton, Usable Bed Size: 72"LR x 30" FB, Usable Slide Size: 72"LR x 30"FB ...more
Turbo Automatic, Ice Rake System, 300 Tons capacity
Genemco | Hearne, TX
Category: Misc. Refrigeration Equipment
Seller: Genemco
Location: Hearne, TX
Mfr: Turbo
Model: AUTOMATIC
Turbo Rake System is suited to store up to 300 Tons of Ice. Standard Ice Components are made from hot-dipped galvanized steel. Overall Rake System Dimensions.
120 Ton, Komatsu #PHS110x3, hydraulic press brake, 10' overall, 105" between housing, 6.7"stroke, 15.7"throat, 14.4"open, dual foot pedal Control
Machinery Central | Louisville, KY
Category: Hydraulic Press Brakes
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Komatsu
Model: PHS110X3
Spec Sheet:, 10' KOMATSU 120 TON WIDE-BED HYDRAULIC PRESS BRAKE, Serial No 10296, Model PHS 110X310, 18" x 122" T-Slotted Wide Bed Attachment, 18" x 122" Extra Wide Ram Attachment w/Bolt On, Angle Plates, Electric Depth-Stop Adjustment, Dual Pedal Foot Control, Variable Speed Pressing, Tonnage Indicator, CATALOG : ...more
18" wide x .187 th, COE #CPRF-S318, servo feeder, 2.5" feed roll, 2015
Alma Machinery Co-Columbia TN | Columbia, TN
Category: Servo Feeders
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Model: CPRF-S318
Year: 2015
capacity 18" wide x.187" th max thickness @ full width.187" maximum velocity 367 fpm max acceleration 65 fps standard drive ratio 3:2.1 pass line height 45 - 53" adjustable feed roll diameter 2.5" number of feed rolls / layout 1 over 1 spm w/180 degree press angle 220 @ 2", 142 @ 6", 102 @ 12", 80 @ 18", 65 @ 24", 55 ...more
JUST ADDED!
55 Ton, Finn-Power #E-Brake-50-2050-HS-TS, Press Brake, 81" Bed length, 11.81" Stroke, 25.6" Daylight, 14.7 HP
Machine Tool Technologies | Milwaukee, WI
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Finn-Power
Model: E BRAKE 50-2050 HS TS
440 Ton, U.S. Industrial #USHB, CNC hydraulic press brake, 4' -13' overall, new, #14304-14320 (18 available)
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Press Brakes
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: U.S. Industrial
Model: USHB
NEW 22 TON x 4" US INDUSTRIAL MODEL USHB22-4S CNC HYDRAULIC PRESS BRAKEBASE PRICE: PORSTANDARD EQUIPMENT2-Axis "Simple CNC" For Backgauge & Ram Programming Power Front Operated Back Gauge, Motorized With Fine Adjustment Hand WheelPower Ram Depth Control, Motorized With Fine Adjustment Hand WheelDigital Displays ...more
1000/600 Ton, Danly #D4-1000-600-156-96, double action stamping press, 32/42" stroke, 82" SH
Master Machinery LLC | Detroit, MI
Category: Double or Triple Action Presses
Seller: Master Machinery LLC
Location: Detroit, MI
Mfr: Danly
Model: D4-1000-600-156-96
, Manufacturer Danly Model D4-1000-600-156-96 Condition Used Stock Number 11355 Inner Tonnage 1000 ton Outer Tonnage 600 ton Bed area 156"x96" Inner Stroke 42" Outer Stroke 32" Shut height (above rolling bolster) 82" Strokes per minute 9 / 14.6 / 18.
220 Ton, Seyi #SN1-220, single crank gap press, 8.66" stroke, 17.72" Shut Height, 4.33" adj., 25-55 SPM, 55.12" x 33.07" bed, air clutch & brake, 2012
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Seyi
Model: SN1-220
Year: 2012
8.66" STROKE, 17.72" SHUT HEIGHT OVER BOLSTER, 4.33" RAM ADJUSTMENT POWERED, 25-55 SPM, 33.86" X 25.59" RAM, 55.12" X 33.07 BED, AIR CLUTCH, AIR BRAKE, PALM BUTTONS, AIR COUNTER BALANCE, HYDRAULIC OVERLOADS, 2012, 20 HP 460V, 66" X 95" X 146.6" T APPROX DIMENSIONS, 40,500 APPROX WEIGHT.
175 Ton, Pacific #J175-12, hydraulic press brake, 12' overall, 126" between housing, adjustable tonnage Control
National Machinery Exchange | Newark, NJ
Category: Hydraulic Press Brakes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pacific
Model: J175-12
PACIFIC MODEL J175-12 HYD. PRESS BRAKE, Capacity. 175 ton, Bending. 1/4" x 10', Overall length bed and ram. 12', Distance between housings. 10'6", Maximum stroke (adjustable). 10", Open height. 15", Closed height. 5", Distance top of bed to floor. 36", Throat depth. 7", Rapid advance. 230 ipm, Normal ...more
60 Ton, Minster #6036, OBI press, 5" stroke, 13.5" Shut Height, 3" adj., 32" x 21" bed,air clutch & brake, 7.5 HP, 120 SPM, 1960, #12590J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Minster
Model: 6036
Year: 1960
MINSTER 60 TON OBI PRESS, STK# 12590J MDL# 6036 S/N 12355 YEAR: 1960, CAPACITY: 60 TON, STROKE: 5", SHUT HEIGHT: 13.5", ADJ: 3", BED SIZE: 32" X 21", SPEED: 120 SPM, MOTOR: 7.5 HP, 1200 RPM, O.A.D:, APPROX WEIGHT: 12,000 LBS, FLYWHEEL DESIGN, AIR CLUTCH & BRAKE, 2.5" BOLSTER, DUAL PALM BUTTONS, FLYWHEEL, TEMPORARY ...more
220 Ton, SafanDarley, electric press brake, 13' 5" OA, 160" between housing, 11.8" stroke, 16.31" DL, SafanDarley EC20 Control, 39.4" BG, 2 front support arms, 2013
Westway Machinery Ltd | Mississauga, ON
Category: CNC Press Brakes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Safandarley
Year: 2013
S:, SafanDarley EC20 Control, Windows BasedEight CNC Axis Y1, Y2, X1, X2, R1, R2, Z1, Z2Wila NS Hydraulic Upper & Lower Clamping / Crowning Premium.Physical Rear Guarding2 Front Support Arms on Lateral Guides c/w Hand Crank AdjustmentIntegrated Safety Light Curtains, with Single and Double Beam Break, MODEL: ...more
110 Ton, Ermak #Power-Bend-Falcon, CNC press brake, 8.5' overall, 86.6" between housing, 10.8" stroke, 16.1" throat, 20.9" DL, 31.5" BG, Delem 53-T, 2022
Manufacturing Solutions | Santa Ana, CA
Category: CNC Press Brakes
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Ermak
Model: POWER-BEND-FALCON
Year: 2023
110 Tons102"86.6"16.1"20.9"10.8"7.87 IPS.37 IPS6.10 IPS31.5"9.1 IPS147 x 80 x 110"H15,200 Lbs..
110 Ton, Ermaksan #PBF-2600x100, CNC press brake, 8.5' OA, 86.6" between housing, 10.8" stroke, 16.1" throat, 20.9" DL, 31.5" BG, Delem 53-T, 2021
Manufacturing Solutions | Santa Ana, CA
Category: CNC Press Brakes
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Ermaksan
Model: PBF-2600X100
Year: 2021
110 Tons102"86.6"16.1"20.9"10.8"7.87 IPS.37 IPS6.10 IPS31.5"9.1 IPS147 x 80 x 110"H15,200 Lbs..
200 Ton, Dake #19-525, H-frame trvling head hydraulic straightening press, 40" stroke, 10.8' daylight, 78" between housing
Machinery Central | Louisville, KY
Category: H Frame Hydraulic Press Machines
Seller: Machinery Central
Location: Cincinnati, OH
Mfr: Dake
Model: 19-525
Year: 1996
200 TON DAKE "H"-FRAME TRAVELING-HEAD, HYDRAULIC STRAIGHTENING PRESS, Serial No 190373, Model 19-525, Slow Down, Fast Raise, Frame Forward, Slow Raise, Lock Frame, Frame Reverse, Unlock Frame, Fast Down, Slow Down, Start, Stop., Hydraulic Gauge, Bell Housing & Work Support Table (Removeable), The 200 ton Traveling ...more
150 Ton, Verson, double crank gap frame press, 8" stroke, 28" Shut Height, 4" adj., 20-60 SPM, 108" x30"bed, air clutch & brake, 1985
D & D Industries Inc | Monclova, OH
Category: Gap Frame Double Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Verson
Year: 1985
MODEL #: G2-150-96-36, SERIAL #: 13062, 16" STROKE, 6" POWERED RAM ADJUSTMENT, 54" SHUT HEIGHT, 96" x 36" BED, 25 SPM, AIR CLUTCH & BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, 108" LR x 80" FB, 55,000 LBS ESTIMATED WEIGHT FLOOR STANDING GOOD CONDITION.
2100 Ton, Baldwin Lima Hamilton, oil hyd.hi-ratio horiz.extrusion, updated, 47" main & side rams, 26" Piercer Ram, very good
Mauldin Machine Inc | Jacksonville, AR
Category: Extrusion Presses
Seller: Mauldin Machine Inc
Location: Jacksonville, AR
Mfr: Lima
ONE PREOWNED BALDWIN-LIMA-HAMILTON 2100 TON OIL HYDRAULIC HIGH RATIO HORIZONTAL EXTRUSION PRESS with PIERCER, Capacities, Press at 3000 PSI (maximum 2100 Tons, Press at 2550 PSI 1800 Tons, Piercer ram at 2550 PSI, Advance 190 tons, Return 100 Tons, Main Ram at 2550 PSI 1545 Tons, Side rams at 2550 PSI, Advance 265 ...more
150 Ton, Press Master #RTP-150, 16" stroke, roll-in bed, 4-Axis, powered hydraulic roll-in table, #160046
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: RTP-150
150 TON PRESSMASTER ROLL-IN TABLEFULL 4 AXIS POWERED STRAIGHTENING PRESS RATED CAPACITY. 150 TONSWIDTH BETWEEN UPRIGHTS. 48"DEPTH BETWEEN POSTS. 16-3/4"MAXIMUM RAM TO TABLE. 26-3/4"STROKE. 16"TABLE TRAVEL. 23.25"FLOOR TO TABLE TOP. 25-3/4"CYLINDER BORE SIZE. 11"PRESSING SPEED. 6 ...more
75 Ton, Danly #75, flywheel type OBI press, 8" stroke, 21" Shut Height, air clutch & brake, 40-80 SPM, 1975
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Danly
Model: 75
Year: 1975
MODEL #: NO 75, SERIAL #: 755976-14-76, 8" STROKE, 21" SHUT HEIGHT, 3" RAM ADJUSTMENT, 40-80 SPM, 36" x 24" BED, 24" x 18" RAM, AIR CLUTCH & BRAKE, AIR COUNTERBALANCES, PALM BUTTONS, 70" LR x 101" FB x 165" TALL, 17,000 LBS ESTIMATED WEIGHT.
100 Ton, Minster #P1-100, SSSC press, 1.2" stroke, 15" Shut Height, 600 SPM, air cooled & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: P1-100
MODEL #: P1-100, SERIAL #: 24618, RE MANUFACTURED BY MINSTER IN 1994, 1.25" STROKE, 3" RAM ADJUSTMENT, 15" SHUT HEIGHT, 0-600 SPM, 20" WINDOWS, 22" x 30" BED, 18.5" x 18.5" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, FLOOR STANDING, NO BOLSTER.
300 Ton, Bliss #S2-300, straight side double crank press, 14" stroke, 40" Shut Height, 10" ram adj., 15-30 SPM, 108" x60"bed, 25" windows, air clutch & brake, air counterbalance
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: S2-300
14" STROKE, 10" POWER RAM ADJUSTMENT, 40" SHUT HEIGHT, 15-30 SPM, 108" X 60" BED, 25" WINDOWS, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, CAN BE FLOOR STANDING.
60 Ton, Minster #6, flywheel OBI press, 6" stroke, 11" Shut Height, 2.75" adj., 90 SPM, 32" x 21" bed, air clutch & brake, 1975, #11544
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Minster
Model: -6
Year: 1975
(1) Used 60 Ton Minster #6 Flywheel OBI Press, Capacity: 60 Ton, Stroke: 6, Adjustment: 2.75, Shut Height: 11 (SDAU over bed), Speed: 90 SPM, Bed Area: 32 lr x 21 fb, Air Clutch and Brake, Air Counter Balance, Dual Palm Buttons, Inch / Single / Continuous Modes, Flywheel Design, Capacity: 60 Ton, Stroke: 6 ...more
50 Ton, Amada #RG-50, CNC press brake, 6.8' OA, 59.9" between housing, 3.94" stroke, 10.67" Shut Height, 15.76" throat, 14.58" open, NC9-EXII, Back Gauge, pneumatic fingers, 1995
MachineStation | Lake Elsinore, CA
Category: CNC Press Brakes
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Amada
Model: RG-50
Year: 1995
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, NC9-EXII CNC Control, Back Gauge, Remote ...more
25 Ton, Rousselle #3, OBI Press, 2" Stroke, 10.75 Shut Height, 135 SPM, 20" x 14" Bed, Air Clutch & Brake, 15" Throat, 1987
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Rousselle
Model: 3
Year: 1987
ORDER 25, 2" STROKE, 10.75" SHUT HEIGHT, 2" RAM ADJ., 135 SPM, 8.25" X 5.5" RAM, 20" X 14" BED, AIR CLUTCH, AIR BRAKE, ROCKFORD 1500 SSC CONTROL, PALM BUTTONS, 15" THROAT, 1987, 48" X 60" X 85" T APROX., 4500 LBS APROX..
Valmet Pilot / Lab, 13.3" wide paper machine, 60-140 GSM, 2 ply, 1982
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Valmet
Year: 1982
109857, Used Pilot/Lab 13.3" (340MM) 2-ply wide paper machine, Two ply 140 + 40 g/m2 400m/min fourdrinier + twin wire former Stratified forming on fourdrinier + top former 85 g/m2 700m/min, Speed max 2500m/min (design speed), roll-up of wet web after press, approx. 1000m/min., Kraft liner 65g/m2 1000m/min, twin wire ...more
120 Ton, Strippit LVD #120-BH-08-CAD-CNC, CNC press brake, 8' overall, 80" between housing, 2000
SOMINN Machinery Sales | Dodge Center, MN
Category: CNC Press Brakes
Seller: SOMINN Machinery Sales
Location: Dodge Center, MN
Mfr: Strippit
Model: 120-BH-08-CAD-CNC
Year: 2000
STRIPPIT LVD (USED) MODEL-120 BH 08 PRESS BRAKE, - 24 HP MOTOR, - 271 IPM RETURN SPEED, - 28 IPM BENDING SPEED, - 307 IPM APPROACH SPEED, - 15.7" STROKE LENGTH, - 15.7" OPEN HEIGHT, - 15.9" THROAT DEPTH, - 80" DISTANCE BETWEEN HOUSINGS, - 96" OVERALL LENGTH OF BED/RAM, - 21,000LBS APPROX ...more
200 Ton, Bliss #C-200, single point gap frame press, 8" stroke, 24" Shut Height, air clutch & brake, 1998
Equipment Hub | Decatur, GA
Category: Gap Frame Single Crank Press Machines
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Bliss
Model: C-200
Year: 1998
Stock #: 152240002, Location: Michigan, Brand: Bliss, Model: C-200, Year: 1998, Approx. Shipping Weight: 54,000 Lbs., Skidding Fee: Skidding Not Available, Loading Fee: Rigging Required, Capacity: 200 Tons, Bed L-R: 58", Bed F-B: 34", Stroke: 8", Adjustment: 4.5", Shut Height: 24", Max Speed: 60 ...more
90 Ton, Cincinnati #90AF-6, Autoform Hydraulic Brake, 8' Bed & Ram length, 6.5' Between Housings, 14" Ram Stroke, 7" Throat depth, 15 HP, 1991
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 90AF-6
Year: 1991
SERIAL. 47363MODEL. 90AF-6YEAR NEW. 1991CAPACITY. 90 TONOVERALL LENGTH OF BED & RAM. 8'DISTANCE BETWEEN HOUSINGS. 6'6"STROKE OF RAM. 14"OPEN HEIGHT. 21"CLOSED HEIGHT. 7"DEPTH OF THROAT. 7"RAM SPEED RAPID APPROACH. 380 IPMRAM SPEED PRESSING. 1 TO 120 IPMRAM SPEED NORMAL RETURN. 11 TO 405 IPMBACK GAUGE CNC. ...more
60 Ton, Bliss #C-60, OBI Stamping Press, 6" Stroke, 3" Adjustment, 10.75" Shut H, 20" x 32" Bed, 5 HP, 1978
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Bliss
Model: C-60
Year: 1978
SERIAL. HP44866 H57420, MODEL. C-60, STROKE. 6", ADJUSTMENT. 3", SHUT HEIGHT. 10-3/4", BED. 20" X 32", CLUTCH & BRAKE. AIR, ROSS VALVE. YES, AUTO LUBE. BIJUR, CONTROLS. LINK, MOTOR. 5 HP.
300 Ton, Warco #SC2-300, 6" stroke, 72" x 36" bed, 30-60 SPM, bargain, #3482
Alma Machinery Co-Ann Arbor MI | Ann Arbor, MI
Seller: Alma Machinery Co-Ann Arbor MI
Location: Ann Arbor, MI
Mfr: Warco
Model: SC2-300
CAPACITY 300 TON AT 1/4", STROKE 6", MAX. SHUT HEIGHT TO BED APPROX. 36" SDAU, BED AREA 72" RL X 36" FB (36" FLOOR TO BED), SPEED 30-60 SPM (VARIABLE), RAM AREA(W/8 PT. GIBBING) 72" RL X 36" FB T-SLOTTED, RAM ADJUSTMENT 6" MOTORIZED ADJUSTMENT, BOLSTER SIZE 6-3/4" X 72" RL X 36" FB T-SLOTTED, WINDOW SIZE 25" WIDE ...more
Cam-Wood #PT-48S3FH, high frequency 3-sided boa, 4' x 8' / 5' x 10' capacity, 49" width x 110" L x 9/6" - 2-3/4" H, 5 HP pump, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: PT-48S3FH
Year: 2026
CAM-WOOD PT-48S3FH High Frequency, 3-Sided Board PressSlanted type High Frequency Press with a 4' X 8' capacity; also available with 5' x 10' capacity.s: -- Mass production for wooden boards, 2 to 3 minutes for drying a 4' x 8' or 5' x 10' wooden board -- a massive upper platen that ...more
NEW Allen-Bradley BRADLEY AB PowerFlex 700 20BE144A0AYNANC0 150HP 600V WITH BRAKE #S-391
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Allen-Bradley
Model: 20BE144A0AYNANC0
NEW ALLEN BRADLEY AB PowerFlex 700 20BE144A0AYNANC0 150HP 600V WITH BRAKE #S-391.
150 Ton, Bliss #S2-150-96-48, straight side double crank, 10" stroke, 32" Shut Height, 96" x48" bed, 30 SPM, 8" ram adj, air clutch, 1968
Alma Machinery Co-Columbia TN | Columbia, TN
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Bliss
Model: S2-150-96-48
Year: 1968
CAPACITY:150 tON STROKE:10″ SHUT HEIGHT TO BED:32″ (SDAU) BED AREA:96″ RL X 48″ FB SPEED:30 SPM RAM AREA:96″ RL X 48″ FB RAM ADJUSTMENT:8″ (MOTORIZED) BOLSTER SIZE:6″ X 96″ RL X 48″ FB WINDOW SIZE:19″ FB X 15″ H DIST UPRIGHTS / FLOOR TO ...more
300 Ton, Bliss #S2-300-72-42, straight side double crank press, 10" stroke, 24" Shut Height, 6" ram adj., 25-50 SPM, 72" x42"bed, 25.5"windows, air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: S2-300-72-42
10" STROKE, 24" SHUT HEIGHT, 6" RAM ADJUSTMENT, 25-50 SPM, 72" X 42" BED, 72" X 42" RAM, 25.5" WINDOWS, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, FLOOR STANDING.
50 Ton, Aida #NC1-45(2), C frame press, 4.7" stroke, 19.6" between housing, 80 SPM, 2.3" adj, Rockford SSC-1500 controls, 1987
Alma Machinery Co-Columbia TN | Columbia, TN
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Aida
Model: NC1-45
Year: 1987
CAPACITY50 US TON BLANKING CAPACITY40 US TON STROKE4.7" MAX DIE HEIGHT10.6" SDAU OVER BOLSTER BED AREA31.8" X 17.3" (RL X FB) SPEED80 SPM SLIDE ADJUSTMENT2.3" SLIDE AREA16.1" X 13.3" (RL X FB) (T-SLOTTED) BOLSTER PLATE4.3" H X 31.8" RL X 17.3" FB (T-SLOTTED) DISTANCE BETWEEN UPRIGHTS19.6" DISTANCE FLOOR TO BED27" ...more
100 Ton, Sanki #SDP1310-100TD, hydraulic die spotting press, 51" x39" platen, 38.4" stroke, 41.2" DL, front & rear light safety curtains, one shot way lube
Alternative Machine Tool Inc | Dousman, WI
Category: Die Tryout and Spotting Presses
Seller: Alternative Machine Tool Inc
Location: Dousman, WI
Model: SDP1310-100TD
Platen Size: 51.0” x 39.0” Pressing Capacity: 100 Ton Maximum Mold Weight: 12,000 lbs Upper Mold Half Maximum Weight: 6,000 lbs Stroke w/ Bolsters Installed: 38.4” Daylight w/ Bolsters Installed: 41.2” Hyd. Motor Horsepower: 10 Hp Mold Top Half Inversion: +/- 180° Voltage: 480/3/60 Floor ...more
220 Ton, Stamtec #G1-200, single point gap frame press, 7.88" stroke, 17.73" die hght, 4.33" adj., 20-50 SPM, air clutch & brake, #11316
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Stamtec
Model: G1-200
Capacity: 220 Ton, Stroke: 7.88, Adjustment: 4.33, Die Height: 17.73, Speed: 20 - 50 SPM, Bed Area: 55 lr x 32 fb, Slide Area: 33 lr x 24 fb, Air Clutch and Brake, Air Counterbalance, Motorized Slide Adjustment, Overall height: 126, Catalog Weight: 46,000#, Capacity: 220 Ton, Stroke: 7.88, Adjustment: 4.33, Die ...more
300 Ton, Pacific #300-14, 14' overall, 149" between housing, 12" stroke, 10" throat,heavy duty hydraulic,foot pedal, #A4348
Sterling Machinery Exchange | South El Monte, CA
Category: Hydraulic Press Brakes
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Pacific
Model: 300-14
Tonnage 300 Ton Distance Between Housings 149" Throat 10" Open Height 20" Backgauge No Safety Curtains No Type Hydraulic Bed Width 8" Horsepower 30 H.P. Voltage 220/440V ~ 3 Phase Pit Required Yes WEIGHT 42,000 Lbs. Dimensions (L x W x H) 176" X 86" X 135" Dimension Of Bed Only 169" X 60" X 9" s ( 2 ) 24” Front ...more
4000 Ton, National, mechanical hot forging press, 15" stroke, 39" Shut Height, 46 SPM, in the USA
Ray Jacobs Machinery Co | Scottsdale, AZ
Seller: Ray Jacobs Machinery Co
Location: Scottsdale, AZ
Mfr: National
The following are for the original machine including any known changes. Discrepancies may exist between and the current machine. Machine Size 4000 MP Shipped from Tiffin OH 2/11/1972 Strokes per minute 46 Stroke 15" Shut Height 39" Brake style Band Electrical 460V, 3Ph. Machine is disassembled and ready for shipment.
150 Ton, Press Master #CFP-150T, hydraulic press, 15" stroke, 20.5" daylight, 13" throat, 20 HP, #126572
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP-150T
150 TON PRESSMASTER HYDRAULIC C-FRAME PRESSMODEL CFP-150T… BRAND NEW RATED CAPACITY. 150 TONSAPPROACH SPEED. 80 IPMPRESSING SPEED. 9 IPMRETURN SPEED. 101 IPMTABLE WIDTH.″4"TABLE DEPTH. 20"U-SLOT WIDTH. 4"DAYLIGHT. 20-1/2"FULL STROKE. 15"THROAT. 13"TABLE ...more
100 Ton, Goiti #CFR, single point gap frame press, 5.5" stroke,air clutch & brake, 1984, #10406
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Gap Frame Single Crank Press Machines
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Goiti
Model: CFR
Year: 1984
(1) Used 100 Ton Goiti Single Point Gap Frame Press, Serial Number: 84-429-51, Capacity: 100 Ton, Stroke: 5.5, Die Height: 11.2, Slide Adjustment: 3.54, Bed Area: 38LR x 24.5FB, Slide Area: 24LR x 18FB, Wintriss #WPC-1000 Clutch & Brake Control, Omron Safety Light Curtains, T Slotted Bolster, T-Slotted Ram ...more
JUST ADDED!
Wemhoner #Basic-1000-Plus, Membrane Press, 112" x 59" Platens, 104" x 51" Press System, 240 Ton capacity, (6) Cylinders, 4.9" diameter Press Pistons, 2012
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Wemhoner
Model: BASIC 1000 PLUS
Year: 2012
WEMHONER VARIOPRESS® BASIC 1000 PLUS (KT-MB 28.5/15-240) Membrane Press with Storage/Unwind Stand (Paternoster), Foil Cutter, Turnover Device. Data: Platen area approx 2850 x1500 mm (112" x 59"). Max. operating area Approx. 2650 mm X 1300 mm (104" x 51") Press system, hydraulic single daylight upstroke press. ...more
110 Ton, Amada #RG-100-EX, CNC press brake, 10' overall, 100.39" between housing, 3.937"stroke, 15.75"throat, 14.57"open, NC9EX-II, 1991
MacLean Machinery Network | Tucker, GA
Category: CNC Press Brakes
Seller: MacLean Machinery Network
Location: Tucker, GA
Mfr: Amada
Model: RG-100-EX
Year: 1991
Model RG 100 EX, Maximum Tonnage 110 Tons, Maximum Bending Length 120.28", Maximum Stroke Length 3.937", Open Height 14.57", Throat Depth 15.75", Distance Between Side Frames 100.39", Ram Speed: Approach 1.8"/sec., Bending.33"/sec., Return Speed 1.38"/sec., Electrical Requirements 10hp, 220-230V/3/60, CNC Control ...more
30 Ton, Minster #PM2-30-30, straight side double crank press, 1.5" stroke, 11" Shut Height, 1.5" adj., 100 SPM, air clutch & brake, #13132
Yoder Brothers Machinery | Toledo, OH
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Minster
Model: PM2-30-30
SERIAL. 21412 MODEL. PM2-30-30 CAPACITY. 30 TONS STROKE. 1.5" SHUT HEIGHT ON BED (SDAU). 11" RAM ADJUSTMENT. 1.5", BED BOLSTER SIZE. 30" X 20" STROKES PER MINUTE. 0 TO 100 CLUTCH & BRAKE. AIR DRIVE TYPE. FLYWHEEL LUBE SYSTEM. YES DRIVE MOTOR. 7-1/2 HORSEPOWER.
400 Ton, Heim #D2-400, straight side double crank press, 10" stroke, 27-3/16" Shut Height, 6" ram, 20 SPM, 102" x48" bed, air clutch & brake, 26.5" window
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Heim
Model: D2-400
HEIM 400 TON SSDC PRESS, S/N H2691, STOCK# 14128J CAPACITY 400 TONS STROKE 10" SHUT HEIGHT 27.3/16" OVER BOLSTER SPEED 20 SPM BED SIZE 102"LR X 48" FB RAM AREA 100" LR X 36" FB RAM ADJ 6" APPROX WEIGHT 60,000 LBS, AIR CLUTCH AIR BRAKE AIR COUNTERBALANCES FLUSH FLOOR WINDOWS 26 1/2".
60 Ton, Minster #6SS, OBI flywheel press, 5" stroke, 14.5" Shut Height, 2.75"ram adj., 90 SPM, 32" x21"bed, air clutch & brake, 1994
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: 6SS
Year: 1994
ORDER 60, MINSTER 60 TON OBI PRESS, MODEL #: 6SS, SERIAL #: 28473, NEW 1994, 5" STROKE, 14.5" SHUT HEIGHT, 2.75 POWER RAM ADJUSTMENT, 90 S.P.M., 32" x 21" BED, FLYWHEEL DESIGN, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, LUBE SYSTEM, PALM BUTTONS, 15 HP MOTOR, 15,000 LBS APPROX WEIGHT.
JUST ADDED!
Caterpillar #C4.4 30S-55SS, diesel engine, 2011
Global Power | Nisku, AB
Category: Diesel Engines
Seller: Global Power
Location: Nisku, AB
Model: C4.4
Year: 2011
Cat C4.4L Diesel engine 30S-55SS, Available At Global.Power Systems, 308-5585 ENGINE AR-PRIMARY, S/N 4441-UP, 95 BRAKE KW (127 BHP) AT 2200 RPM, www.globalpower.ca.
75 Ton, Danly #75, OBI press, 8" stroke, 21" Shut Height, air clutch & brake, 68 SPM, 1975
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Danly
Model: 75
Year: 1975
MODEL #: 75, SERIAL #: 7559130674, 8" STROKE, 21" SHUT HEIGHT, 3" RAM ADJUSTMENT, 68 SPM, 36" x 24" BED, 24" x 18" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, AIR COUNTERBALANCES, YEAR: 1975, 70" LR x 101" FB x 158" TALL, 17,000 lbs ESTIMATED WEIGHT.
60 Ton, Danly, OBI press, 3.5" stroke, 13-1/2" Shut Height, air clutch & brake, 100 SPM
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Danly
SERIAL #: 6057380172, 3.5" STROKE, 3" RAM ADJUSTMENT, 13-1/2" SHUT HEIGHT, 32" x 22" BED, 15-1/2" x 12" RAM, 2" THICK T-SLOTTED BOLSTER, AIR CLUTCH & BRAKE, 100 SPM, PALM BUTTONS, 55" LR x 76" FB x 112" TALL APPROXIMATE DIMENSIONS, 9500 LBS APPROXIMATE WEIGHT, GOOD CONDITION.
150 Ton, Bliss, OBI press, 8" stroke, 22" Shut Height, 4.5"adj., 40-80 SPM, 50" x30"bed, air clutch & brake, 1986
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Year: 1986
8" STROKE, 4.5" ADJUSTMENT, 22" SHUTHEIGHT, 40-80 SPM, 34" X 24" RAM, 50" X 30" BED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, LIGHT CURTIANS, 1986, 108" X 97" X 176" T APROX., 35000 APROX..
73 Ton, Trumpf #Trubend-3066, CNC hydraulic press brake, 6' overall, 69" between housing, Delem DA-65T Control, 2006
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Trumpf
Model: TRUBEND-3066
Year: 2006
73 Tons X 80” Hydraulic Press Brake with Delem DA-65T Graphical Control, Palm Buttons Mounted on Pedestal Station w/ Foot Pedal, Trumpf CNC Multi - Axis Backgauge (X, Y, R, Z1, Z2)., Tonnage: 73 Tons, Bed Length: 80”, Distance Between Housings: 69”, Stroke: 7.87”, Open Height: 14”, Closed ...more
1350 Ton, Pacific #1350D-10/80, hydraulic press, 48" stroke, 66" daylight, 120" x80"bed, 1650 gallon reservoir, w/ cushion, 2010
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Pacific
Model: 1350D-10/80
Year: 2010
For sale: Used 1350 Ton Pacific Model 1350 D-10/80 Straight Side Hydraulic Press, 2010. Includes cushion. : 1350 T, 120x80 in bed, 48 in stroke, 66 in daylight. s 2x125 HP motors, 1650-gallon reservoir, and more., Capacity:, Forming: 1350 Ton, Punching: 900 Ton, Stroke: 48", Daylight Opening: 66", Closed Height: 18" ...more
325 Ton, Standard #AB-325-16, CNC Press Brake, 192" Bending, 173" Between Housing, 8" Stroke, 16" Open H, 0' Throat, 220/440 V., 3PH, 1994
Revelation Machinery | Chicago, IL
Category: CNC Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Standard
Model: AB-325-16
Year: 1994
Make: Standard, Model: AB-325-16, Year: 1994, Machine Location: Kansas, Tonnage: 325 Ton, Bending Length: 192″, Dist. Between Housings: 173″, Throat Depth: 10”, Open Height: 16″, Stroke Length: 8”, Closed Height: 8″, Fast Approach Speed: 112 IPM, Fast Return Speed: 18 IPM, Press ...more
165 Ton, Aida #NC1-15(1), gap frame press, 5.11" stroke, 13.77" Shut Height, 3.93" ram adj., 40-85 SPM, 46" x23.62" bed, air clutch & brake, 1986
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Aida
Model: NC1-15
Year: 1986
5.11" Stroke, 3.93" Ram Adjustment, 13.77" Shut Height Over Bolster, 40 - 85 SPM, 27.55" x 22.83" Ram, 46" x 23.62" Bed, Air Clutch, Air Brake, Air Counterbalances, Hydraulic Overloads, Palm Buttons, 60" LR x 83" FB x 131" Tall, Estimated Weight 35000.
150 Ton, Lodge & Shipley #150-10, mechanical brake, 12' overall, 126" between housing, 3" stroke, #75565
Yoder Machinery Sales | Holland, OH
Category: Mechanical Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Lodge & Shipley
Model: 150-10
SERIAL. 12354, MODEL. 150-10, CAPACITY. 150 TON, LENGTH OF BED & RAN. 12', DISTANCE BETWEEN SIDE HOUSING. 10'6", STROKE. 3", POWER RAM ADJUSTMENT. 5", DEPTH OF THROAT. 8, SHUT HEIGHT (SDAU). 12", STROKES PER MINUTE. 30", FULL LENGTH FOOT PEDAL. YES, FLOOR STANDING. YES, MOTOR HORSEPOWER. 10.
71 Ton, Minster #P2H-63-39, straight side double crank press, 1.9" stroke, 2.95"adj., 39.4"x24.8"bed, 400 SPM, Minster clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: P2H-63-39
Capacity: 71 Ton Bed Size: 39.4” l-r x 24.8” f-b Stroke: 1.97” Adjustment: 2.95” Speed: 400 SPM Windows: 14” wide x 17” high : Livonia Magnetic Scrap Conveyor Minster Clutch and Brake Control.
110 Ton, Amada #RG-100, hydraulic, 122.1"bending length, Hurco Autobend 7 2-axis Back Gauge, tooling, 1997
Johnston Machinery Corp | Des Plaines, IL
Category: CNC Press Brakes
Seller: Johnston Machinery Corp
Location: Des Plaines, IL
Mfr: Amada
Model: RG-100
Year: 1997
400 Ton, Cincinnati #400H, 10' overall, 14" bed, 126" between housing, 18" str., Zakron Back Gauge, hydraulic #83181
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Cincinnati
Model: 400H
Year: 1970
TONNAGE ----------------------------------- 400, BED/RAM LENGTH ---------------------------- 14 ft DIE RAIL, BETWEEN THE HOUSING ----------------------- 10 ft6 in, CLOSED HEIGHT ----------------------------- 14 in, STROKE ------------------------------------ 18 in, BELOW GRADE ------------------------------- ...more
McKay #SE4-500-136-84, Blanking Line, 500 ton, 12" stroke, 75" Shut Height, 20" adj, 15-60 SPM, 136" x84" bed
VX Machinery | Sylvania, OH
Category: Blanking Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Mckay
-Tonnage: 500 tons, -Bed Size: 136'' x 84'', -AFCO Feedline: 76’’ x 75,000 lb, -AFCO Washer: 76’’ Wide, -ECI Oiler: 76’’ Wide, Press, -Model: SE4-500-136-84, -Bed Size: 136’’ x 84’’, -Stroke: 12’’, -Speed: 15-60 SPM, -Shut Height: ...more
Piranha #P3, ironworker, 50 ton, brake attachment included
Mid Atlantic Machinery | Harrisburg, PA
Category: Ironworkers
Seller: Mid Atlantic Machinery
Location: Harrisburg, PA
Mfr: Piranha
Model: P-3
50 ton capacityOptions or Upgrades, Brake attachment included.
40 Ton, Rousselle #4F, single crank flywheel OBI press, 3" stroke, 10.5" Shut Height, 3" ram adj., 26.5"x17"bed, air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Rousselle
Model: 4F
3" Stroke, 10.5" Shut Height, 3" Ram Adjustment, 11" X 7.5" Ram, 26.5" X 17" Bed, Air Clutch, Air Brake, Foot Pedal, 18" Throat, Ross Air Valve, 45" LR X 60" FB X 92" Tall, Estimated Weight 5000 LBS.
480 Ton, Baykal #APHS-4116X440, hydraulic press brake, 13' 4"OA, 139" between housing, 12.6"stroke, 19.7"throat, 23.2"DL, Delem DA-69W, 2011
D & D Industries Inc | Monclova, OH
Category: Hydraulic Press Brakes
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
MODEL: APHS 4116×440 CAPACITY: 13′ 5” X 480 TON SERIAL NO.: 17729 OVERALL BENDING LENGTH: 13’ 4” DISTANCE BETWEEN HOUSINGS: 11’ 7” STROKE OF RAM: 12.6” OPEN DAYLIGHT: 23.2” SPEED: ADVANCE: 189 IPM SPEED: PRESSING: 23 IPM SPEED: RETURN: 165 IPM MAXIMUM TRAVEL OF ...more
300 Ton, Verson #S2-300-96-54T, straight side double crank press, 12" stroke, 33" Shut Height, 30 SPM, air clutch & brake
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Verson
Model: S2-300-96-54T
Tonnage 300, Stroke 12 inches, Shut Height 33 inches, Adjustment 6 inches, Bed Size 96" LR x 54" FB, Ram Area 96" LR x 54" FB, SPM 30 SPM, Standard, Used Verson Press Model# S2-300-96-54t, Straight Side Mechanical Press, 300 ton Capacity, 12" Stroke, 33" Shut Height on Bed, 6" Motorized Adjustment, 96" LR x 54" FB Bed ...more
200 Ton, Aida #PC-2C-2, mechanical press, 9.8"stroke, 4.1"adj., 33 SPM
Machinery Marketing International | Chicago, IL
Category: Mechanical Press Brakes
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Aida
Model: PC-2C-2
Capacity: 200 Tons, Stroke: 9.80", Strokes Per Minute: 33, Bolster Area: 57" x 31.40", Slide Area: 33.40" x 24.50", Slide to Bolster: 17.70", Slide Adjustment: 4.10".
551 Ton, Energy Mission #PBE-5061, Press Brakes, 240", 23.6" daylight, 14.8" stroke, 8.7" x 38.8" table, 21.7" throat, 50 HP
Bud's Machine Tools | Murray, UT
Category: Hydraulic Press Brakes
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: PBE-5061
Overview, Type:Press BrakeManufacturer:ENERGY MISSIONModel:ENERGY MISSION PBE 5061 - PRESS BRAKES AVAILABLE UP TO 2,000 TONSCondition:Build To OrderStatus:For Sale, Bending Force: 551 US Tons, Bending Length: 240", Clear Pass: 208.66", Open Daylight: 23.62", Ram Stroke: 14.76", Table Width: 8.66", Table Height: ...more
JUST ADDED!
150 Ton, Dake #5-150A, Hydraulic H-Frame Press, 16" stroke, 48" between housing, 220/440 V., 3ph
Aucto | San Francisco, CA
Category: H Frame Hydraulic Press Machines
Seller: Aucto
Location: Louisville, KY
Mfr: Dake
Model: 5-150A
THE DAKE MODEL 5-150A IS A 150-TON ELECDRAULIC H-FRAME PRESS DESIGNED FOR FABRICATING AND PRESSING APPLICATIONS. IT OPERATES ON AN ELECTRIC, THREE-PHASE POWER SOURCE (220/440V) DRIVEN BY A 2 HP MOTOR. KEY DIMENSIONS INCLUDE A 48-INCH WIDTH BETWEEN THE UPRIGHTS AND 12-1/4 INCHES BETWEEN THE TABLE CHANNELS. THE WORK ...more
JUST ADDED!
Enerpat #VB-100TY, Quality Scrap Tire Baler, 100 ton press force, 1-1.2 TPH, up to 100 tires/bale
Enerpat | Ontario, CA
Seller: Enerpat
Location: Ontario, CA
Mfr: Enerpat
Model: VB-100TY
ENERPAT Scrap Tire Baler Efficient Solution for Used Tire Collection and Compaction - Compact up to 100 scrap tires into one bale and save up to 85% storage space., The ENERPAT Scrap Tire Baler is designed to efficiently compress used tires into compact, high-density bales, helping recyclers significantly reduce ...more
100 Ton, Aida #PD010, mechanical press, 6.6"stroke, 2.9"adj., 50 SPM, 64.9"x23.5" bolster area
Machinery Marketing International | Chicago, IL
Category: Mechanical Press Brakes
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Aida
Model: PD010
Capacity: 100 Tons, Stroke: 6.60", Strokes Per Minute: 50, Bolster Area: 64.90" x 23.50", Slide Area: 49.20" x 19.60", Slide to Bolster: 15.7", Slide Adjustment: 2.90".
75 Ton, Minster #OBS-7, gap frame press, 5" stroke, 20.5"Shut Height,air clutch & brake, 60 SPM, 1998
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Minster
Model: OBS-7
Year: 1998
MODEL: OBS 7, SERIAL #: 29670, 5" STROKE, 3.5" RAM ADJUSTMENT, 20.5" SHUT HEIGHT, 36" x 24" BED, 60 S.P.M., 26" x 16" RAM, BACK GEARED, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCES, PALM BUTTONS, RECIRCULATING LUBE, 7.5 HP 230/460, 1800 R.P.M., YEAR: 1998, APPROXIMATE WEIGHT: 22000 LBS, GOOD CONDITION.
10 Ton, Waterbury-Farrel #200-11, Transfer Press, Crank Eyelet, 11 Station, 4-1/4" center distance, 8" stroke, 80 SPM
National Machinery Exchange | Newark, NJ
Category: Eyelet Transfer Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Waterbury-Farrel
Model: 200-11
STATION. 11, TONS PER STATION. 10, CENTER TO CENTER. 4-1/4", STROKE. 8", DRAW. 2-3/8", BLANK DIAMETER. 4-7/8", S.P.M. 40 TO 80, AIR CLUTCH AND BRAKE, CONDITION AS TAKEN FROM SERVICE, MOTOR DRIVE: 60 HP, 500V D.C., 1750/2100 RPM, WITH CONTROLS.
45 Ton, Bliss #C-45, flywheel type OBI press, 3" stroke, 12.25" Shut Height, 3" adj., 90 SPM, 29.5"x18"bed, air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Bliss
Model: C-45
MODEL #: C-45, SERIAL #: 62933, 3" STROKE, 12-1/4" SHUT HEIGHT, 3" RAM ADJUSTMENT, 90 SPM, 29.5" x 18" BED, 14" x 9" RAM, AIR CLUTCH & BRAKE, PALM BUTTONS, 5 HP 230/460, 60" LR x 74" FB x 107" TALL, 8500 LBS ESTIMATED WEIGHT, GOOD CONDITION.
500 Ton, HPM, 36" x 36", 36" daylight, 24" stroke, gib guided, top-mounted hydraulic, AB PLC, #2317
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Hpm
SERIAL #55-315. 22" DIAMETER MAIN RAM WITH A 21.25" DIAMETER ROD AND APPROX 24" STROKE. THERE IS AN OPTIONAL "PIERCE" CYLINDER IN THE CENTER OF THE MAIN RAM THAT IS 10" BORE WITH AN 8.75" DIAMETER ROD WITH APPROX 3" TO 6" STROKE RATED TO 100 TONS. 36" X 36" NOMINAL BED SIZE (6" DIAMETER HOLE IN CENTER OF BED). MAX ...more
9 Stand, Yoder #M-3 Cee Purlin tooled, gear driven rollforming line, 3" arbor,S43019
Perfection Global | Elk Grove Village, IL
Category: Rollformers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Yoder
Model: M-3
Line Number of Stands: 9 (on 16 Stand Base)Roll Space: 24"Arbor Diameter: 3"Arbor Center to Center Distance: 17"Upper Arbor Adjustment: 5"Upper and Lower Power Driven Arbors 75 HP Main Motor 8" W x 3" Flange "Cee Purlin" Tooling 9" W x 3" Flange "Cee Purlin" Tooling Line Consists of Following ...more
480 Ton, Baykal #APHS-4116x440, hydraulic press brake, 13' 5" OA, 139" between housing, 12.6" stroke, 23.2" DL, 19.7" throat, Delem 69W, 2 front support arms, (4) Back Gauge fingers, 2011
Westway Machinery Ltd | Mississauga, ON
Category: Hydraulic Press Brakes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Baykal
Model: APHS-4116X440
Year: 2011
S:, Five (5) Axis CNC, Y1, Y2, X, R, plus CNC Crowning, Delem 69W Control (on mobile stand)Laser Safe Laser Beam GuardsPhysical Rear and Side Guarding Included, Safety Interlocked2 Front Support Arms Included, SlidingFour (4) Backgauge Fingers, MODEL: APHS 4116×440, CAPACITY: 13′ 5” X 480 TON, SERIAL ...more
