Buy or Sell Your Makino A51

Tetra Pak Continuous Freezer Model No. KF 1000XC. Maximum refrigeration load 9TR. Electric main motor. 10 kW/15 HP. Electric pump motor (2) 0.75 kW/1.0 HP.

Used Westfalia CA458 Stainless Steel Decanter Centrifuge, Manufacture: Westfalia, Model: VA458-00-02, Year: 1992, Bowl dimensions: 18"/10" dia., Max. bowl speed: 3,000 rpm, Material of construction: stainless steel, Main motor drive: 30 kw, 44o volt, belt driven, Additional information: Single lead conveyor with ...more

AB 2100 STAINLESS STEEL MCC - 8 SECTIONS AVAILABLE 15" DEEP 1200 AMP HORIZONTAL BUS 300/600 VERTICAL BUS MAIN BREAKER OR MAIN LUG AVAILABLE- COMBINATION BUCKETS TO SIZE 5, FEEDER BUCKETS TO 800 AMP.

Shears, Mechanical48"10 Ga (Mild Steel), 14Ga. (Stainless Steel), 1/4" (Soft Aluminum)52"3032"36"26" Manual Backgauge2.2 Degree5.5 HP, 3 Phase, 20 Amp, 220 VAC (10A/440VAC optional)73" x 43" x 68"3,110 Lbs..

, Toolmex NUA-25M Tool & Cutter Grinder, Manufacturer: Toolmex Model: NUA-25M, (Subject to Verification), Table Size: 36" x 5.25", Max Center Distance: 25", Max Swing Over Table: 9.8", Distance Wheel Center to Table: 3.5" - 13.75", Longitudinal Table Travel: 17", Cross Table Travel: 9.5", Fine Cross Travel ...more

ALTENDORF F-45 Standard Sliding Table Panel Saw: -- 3,400 mm Sliding table length; 130" cutting length; 16" main blade cap. (18" blade cap. without scoring), 4-7/8" depth of cut, 51" rip cut cap., 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. -- Electric raise & lower of the main blade ...more

20MM CITIZEN A20 TYPE VIIPL CNC SWISS TYPE SLIDING HEADSTOCK PRECISION AUTOMATIC LATHE, NEW 2009, Max. Machining Diam. 20mm, Max. Machining Length 165mm/1 chucking, Main Spindle speeds 100-8000 RPM, Main Spindle Indexing Full C-axis (.001 Deg), Back Spindle Speeds 100-8,000 RPM, Sub-Spindle Indexing Full C-Axis(.001 ...more

At present we have for sale as follows :, 6500ton Open Die Forging Press x 2units Manufacturer: HJ (Korean make) / Seonam (Korean make), Installation: 2006/2008, Press Type: Four column push down Oil hydraulic system Nominal force (static working pressure of 320 bar): 5,000 Tons, Up-setting force (static working ...more

CNC Control: yes, Type of CNC Control: Mazatrol Matrix CNC Control, Chuck Size: 18.5 inches, Turning Diameter: 36.2 inches, Center Distance: 120 inches, Spindle Bore: 7 inches, Spindle Speed (RPM): 1600, Main Motor: 60HP, Live Milling (Yes / No): yes, Live Milling Speed (RPM): 10000, Live Milling Motor: 50 HP, Spindle ...more

Timesavers Model 3331-45-067 Standard Three Head 52" Widebelt Polisher : Crossbelt abrasive belt size: 52" x 103" Main motors: 30, 30, 30HP Maximum width stock: 51" Minimum part length with vacuum bed: 6" Maximum thickness opening: 6" Infeed loading area: 30" Feed speed: 20-80 FPM Approximate full load amps at 460 ...more

Used Pulse Engineering spray dryer system, stainless steel construction, consisting of approximately 53" diameter x 96" straight side main dryer, cone ends, with 1 hp blower on top, approximately 58" diameter x 84" straight side stainless steel filter housing, 4" filters with pulse jet, rotary air lock on bottom, with ...more

TSUGAMI B0203-III SWISS TYPE CNC LATHE, Max. Machining Dia. …………. 20mm, Main Spindle Speed …………. 10,000 RPM, Number of Tools (Standard) …… 13, Number of Power Driven Tools …. 3, C-Axis Indexing ……………. 0.001 deg., Main ...more

Overview, Type: Lathes CNC Manufacturer: M08SY-II Model: M08SY-II Year: 2020 Stock #: 62162 Status: For Sale, Tsugami M08SYII Live Tool Y Axis CNC Lathe with Sub Spindle (2020), Max. Machining Diameter 280 mm (11.02"), Max. Machining Length 380 mm (14.96"), Distance Between Spindles 508mm (20.0"), Max. Chuck Size 8" ...more

A factory cycle pump from DMG (Gildemeister) supplied for the DMG MORI MILLTAP 700 vertical machining center. The label identifies the unit as a 400V cycle pump with DMG ID No. 2849310, Supplier reference 45722, internal model MSU1 0012, and order reference U27056A02. The packaging also references the part "Cycle Pump ...more

Check out this extremely late model saw, with only a couple weeks worth of hours on the meter! 2022 Homag SawTeq B-400, available immediately! HOMAG SAWTEQ B-400 (HPL 400) US Edition is a flexible saw center. This CNC controlled machine s fast, simple programming coupled with high operating speeds to meet today's ...more

Pre Owned Euromac Model ZX1000/30 Hydraulic Punch Press, Serial Number 3MM623102A New 2001, Working Tonnage 30 US Tons, X Axis Stroke 50”, Y Axis Stroke 40”, Maximum Hits Per Minute, Punching with 20mm Pitch 300, Punching with 1 mm Pitch 780, Marking 1000, Numerically Controlled Stroke Depth 0.004 to ...more

SERIAL NUMBER. F-3300, MODEL. #510, CAPACITY. 1/4" TO 3", ANGLE POINT. 82 TO 160 DEGREES, MAXIMUM LENGTH OF DRILL. 28", WILL GRIND 2, 3, OR 4 FLUTE DRILLS. YES, MAIN MOTOR. 1 HORSEPOWER.

With approximately 52 tons of compression force, the CE52A-90 is ideal for processing aluminum and light metal chips into uniform briquettes, significantly reducing material volume while recovering valuable cutting fluids. Its low horsepower requirement and integrated hydraulic system make it an energy-efficient ...more

Make: Nexturn, Model: SA-12, Year: 2002, Machine Location: Minnesota, Max Turning Bar Diameter: 0.47″, Max Turning Bar Length: 6.2″, Max Main Spindle Drilling / Tapping: 0.23″ / M6, Main Spindle Speed: 10,000 RPM, Spindle Power: 3 HP, C Axis Indexing Position: 0.001°, Sub Spindle:, Max Spindle ...more

Capacity: 2000 TonStroke: 11.8"Shut Height: 43.3"Pressing Speed: 20 SPMIdling Speed: 60 SPMBottom Ram Size: 44.1" x 54.7"Main Wedge Top Surface: 40.9" x 55.3"Main Wedge Adjustment: 0.5"Mechanical Upper Ejector (Ram) Capacity: 10 TonMechanical Upper Ejector (Ram) Stroke: 1.2"Hydraulic Lot Ejector (Table) Capacity: 25 ...more

Sheet Size 157 inches Shearing Capacity 1/4 Mild Steel @ 65,000 PSI UTS / 1/8 Stainless Steel @ 95,000 PSI UTS / (Must consider option for Cr12MoV blades.) Shear Angle 1 30 feet No Load Strokes 10 Throat Depth 4.7 inches Adjustment Range of Back Gauge 0.75 - 36 Hydraulic Oil Capacity 66 Gal. Main Motor 15 HP, 220 or ...more

;- FOLEY WORK READY - SHOWN ATTACHMENTS SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, 35" X 29.5" PLATFORM, AC POWER TO PLATFORM, DESCENT & TILT ALARM, DUAL FLASHING BEACON, GATED ENTRY, MOTION ALARM, NON-MARKING SOLID TIRES, PLATFORM EXT DECK, POTHOLE PROTECTION.

Sanders, Belt2100 CFM8"5 HP.

MODEL.: HEAT PRESS, SERIAL.: 007479-1-2, DATE.: 10/2018, WEIGHT.: 4500 LBS., POWER.: 230v/1ph/60hz, MAIN MOTOR.: 2hp, AIR.: NO, WATER.: NO, Machine Type.Presses, Molding Manufacturer.N/A Model.HEAT PRESS Year.2018 Condition.Used.

CNC LATHES G300 SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION: One used 1996 INDEX G300 9-AXIS TWIN SPINDLE TWIN TURRET TURNING MACHINE: Made in Esslingen, Germany -INDEX G300 CNC TURNING MACHINE- Basic machine designed for modular expansion with components listed below: ...more

Spec, Capacity, Tonnage: 143 US tons, Bending Length: 122" between housings, Dimensions & Stroke, Overall Length: 138" (11.5 ft), Distance Between Housings: 122", Stroke: 15.74", Daylight (Open Height): 21.65", Table Depth (Throat): 7.87", Power / Electrical, Main Motor: ~30 HP (22 kW), Used 2000 Pullmax Ursviken ...more

2012 Caterpillar D11T Dozer, Make: CaterpillarModel: D11TYear: 2012Hours: 8,277.4 HoursCondition: Used, Reported in Excellent ConditionView Spec Sheet Below Model Engine – Tier 2 Equivalent Model: Cat C32 ACERTNet Power: 669kW (897HP) SAE J1349/ISO 9249 Min FanGross Power: 695kW (932HP) SAE J1995Bore: 145mm ...more

Rietz Disintegrator with Hopper. Model: RD-12. Auger dimensions: 8 in. dia. x 2 ft. 5 in. L. Pitch: 9-1/2 in. Motor, 30 hp, 1770 rpm, 440 V, 40 amps, 60 Hz, 3 phase. Master gear motor, 1/2 hp, 1725 rpm, 220/440 V, 1.6/.8 amps, 60 Hz, 3 phase. Holding tank approximate capacity: 20 gallons. Inside straight wall ...more

48V DC (eight 6 V 350 Ah batteries), Dimensions (Stowed) 6' 7"H x 17' 5" L x 3' 11" W, Genie Model Z30/20N RJ DC, Machine Weight: 14,220 lbs, Max Horizontal Reach: 20' 6", Opt: Platform Swing Gate, Opt: BCI (Battery Charge Indicator), Opt: Flashing Beacon, Platform Height: 29' 2", Platform Lift ...more

2015 Citizen A20-3F7 CNC Swiss Lathe available, featuring max machining diam. of 20mm, main spindle speeds up to 8000 RPM, and Fanuc CNC controls, live cross milling spindles, sub-spindle, and high-pressure coolant system., Max. Machining Diam. 20mm, Max. Machining Length 165mm/1 chucking, Main Spindle speeds 100-8000 ...more

Make: Quanzhou Feisi Machinery Co., Model: FS-MM02, Year: 2022, Machine Location: Canada, Feisi FS-MM02 Automatic Paper Bowls Making Machine, 2022:, – Automated inline stacking, – A-Upper diameter: 100-150mm, 1 mould, – B-Lower diameter: 80-125mm, – Tubes height: 45-125mm, – Product ...more

The Mitsubishi MR-S11-200-E01 is a single-axis AC servo drive from the MR-S series, rated at 3.5 kW output capacity and designed for use in CNC machining centers and automated machine tool systems. It is commonly found in Mazak and Traub CNC platforms. The unit accepts a 200-230V AC, three-phase input and carries ...more

Serial. 2H759 Model. 26H HOLLOW Swing Over Bed Ways. 26" Swing Over Cross Slide. 18-1/4" Distance Between Centers. 144" Bed Width. 17" Hole Thru Spindle. 5" Spindle Speeds (12). 12 TO 900 RPM Longitudinal Feed Rates. 0.0036" to 0.205"/Rev Threading Range. 2 to 112 TPI Tailstock Spindle Taper. #5MT Tailstock Spindle ...more

Used Westfalia decanter centrifuge, model CA458-00-02, stainless steel product contact surfaces, 458/245 mm bowl diameter, 2.0 solids g/cd, 3000 rpm max bowl speed, single lead conveyor with single row solids discharge ports with replaceable liners and slingers, liquid discharge with adjustable and replaceable dams ...more

Overall Size: 72" x 156", Main Table Size: 72" x 96" with 30" Bolt-On Wings on Each Side, Main Table: 91/2" Thick, Weight (Approx.): 44,500 lbs, Approximately 40" of Travel on one side, 32" on other Base is approximately 66" x 168", Freight charges are not included in sale price. Freight scheduling and costs are ...more

Make: P&H, Capacity: 50 Tons Main, 5 Tons Aux, Span: 45' 3-1/2", Available Lift: 34' Main, 37' Aux, Class: D, Crane Headroom: 81", Wheelbase: 162", Overall End Truck Length: 216", Year: 2001, S/N: CJ33725, Control: Pendant, Electrical: 460/3/60, Status: Taken down, Bridge, - Speed: 120 FPM ...more

Used CNC Lathe, featuring 21" swing, 20" machining length, and 8" chuck. a sub-spindle, T-Plus control, live milling, and chip conveyor. Offers 3-axis and 5,000 RPM., 1996 MAZAK SUPER QUICK TURN 15MS, Swing. 21", Machining Length. 20", # Axis. 3, Chuck Size. 8", Bar Capacity. 2", Power. 20 hp, Max RPM. 5,000 RPM ...more

ABB EHDB130C-1L Spectrum solid state drive contactor rated 600 VDC and 130A continuous. This unit is marked SK 824 085-AF and manufactured by ABB Control, Made in Sweden. The nameplate specifies "Solid State Drive Ratings Only" with a maximum rating of 600 VDC and 130A continuous current. Coil control voltage is 110V ...more

used- sandvik belt flaker. 47.5"w x 43'l, stainless steel belt, knife discharge. has sandvik rotoformer - pastel. 32' of cooling with spray nozzles and water collection. 2hp main drive, 3/60/230/460v. has control panel. belt has been cut and rolled up on a spool. has 74" feed end, (2) 16' cooling ad 54" ...more

Manufacturer Westinghouse / Cutler Hammer Product Family MDS Type of Low Voltage Indoor Air Switchgear POW-R-LINE C Main Bus Amps 1600A.

Make: Star, Model: KJR-25, Year: 1900, Machine Location: Connecticut, Bar Capacity-Round: 1”, Headstock Stroke: 10.4”, Spindle Speed-Main: 350-7000 RPM, Main Spindle Motor-Constant: 5.5KW, Number of Turrets: 2, Tools per Turret: 8, Sub-Spindle Speed: 300-4,500 RPM, Sub-Spindle Motor: 2.2KW, SMW BAR-FEED ...more

Manufacturer Siemens / Allis Chalmers Product Family WL Type of Low Voltage Indoor Air Switchgear WL Main Bus Amps 1600A.

122" (3,100 mm) Rip cutting capacity & pull back, 3.74" (95 mm) saw blade projection, 18 HP (13.5 kW) Main saw motor and 3 HP (2.2 kW) scoring motor; scoring saw adjustment via "CADMATIC 4.0" control., Saw Carriage:Variable saw carriage travel speed from 16 - 426 FPM (5 - 130 MPM), constant return of 426 FPM (130 ...more

2017 Polygim Kobra 16SLY Swiss CNC Lathe Screw Machine with chip conveyor and LNS bar loader., Located at our warehouse in Preston, Idaho., We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various ...more

Timesavers Model 2311-45-1 Single Head 52" Widebelt Sander : Abrasive belt size: 52x103" Main motor: 30 HP Maximum width stock: 51" Minimum part length: 15" Maximum thickness opening: 5" Feed speed: 15-45 FPM Passline height: 33-38" Dust extraction: 1830 CFM (5" static pressure) 2 CFM @ 90 psi Standard s: Dual Action ...more

Large Drum 16 ft. Diameter, 7 ft. 8 in. Tall(2) 14 ft. Sheaves(2) 250 HP Electric 240/120 Volts300/1650 RPM2 in. CableHydraulic Brakes14 ft. Hoist Pulley with: 8 3/4 in. Shafts13 ft. 4 in. Main Drive Shaft 14 in. Diameter that tapers down to 9 1/4 in.Reducer Shaft: 12 in. and 4 7/8 in.Location: Eastern USA.

Timesavers Model 2331-23-201 Three Head 37" Planer Sander : Abrasive belt size: 37"x75" Main motors: 30, 20, 20HP Maximum width stock: 36" Minimum part length: 15" Maximum thickness opening: 5" Minimum finished thickness with planer head: 1/2" Infeed loading area: 14" Feed speed: 15-45 FPM Passline height: 33-38" Dust ...more

Make: Okuma, Model: Captain L370MW Turning Center, Year: 2006, Machine Location: Indiana, Maximum Swing Over Bed: 20.86″, Maximum Turning Diameter: 14.57″, Maximum Turning Length: 19.68″, Bar Capacity: 2″, Main Spindle Speed: 4,500 RPM, Main Spindle Motor: 20 HP, Sub-Spindle Speed: Up to 6,000 ...more