Buy or Sell Your Makino A51
AI-ranked results for makino a51 - closest matches first
JUST ADDED!
DMG, Mori #NLX-2500SY/700, Mitsubishi M730UM with Celos Control, 36.2" swing, 29.2" swing over cross slide, 3.1" bar, 12" & 8" Kitagawa chuck, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Dmg
Model: NLX-2500SY/700
Year: 2022
2022 DMG Mori NLX2500SY/700, machine, Swing over Bed: 36.2″, Swing over cross slide: 29.2″, Max Turning Diameter: 14.4″, Max Turning Length: 27.7″, Bar Capacity: 3.15″, Main Spindle Speed: 4,000 RPM, Main Spindle Nose: A2-8, Main Spindle Bore: 3.58″, Sub Spindle Speed: 5,000 RPM ...more
Bbc Stationary Main Contact Assembly For Lk8, Lke8
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Brown Boveri
Manufacturer ABB / ITE / BBC Product Family LK For Equipment Type LK8 Unit Amperage 800A Type of Contact Assembly STATIONARY MAIN Shipping Width 8 in Shipping Height 8 in Shipping Depth 8 in Shipping Weight 4 lb.
2.6" x 1.5" Reed-Prentice #A22, 3-Die Thread Rolling Machine, (7) 108-720 RPM Die Speeds, 7.5 HP
Yoder Brothers Machinery | Toledo, OH
Category: Thread Rollers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Reed-Prentice
Model: A22
SERIAL. A22-432 MODEL. A22 INFEED DIAMETER - STD. EQUIPMENT. 1/4" TO 2-5/8" THREAD LENGTHS - STD. EQUIPMENT. UP TO 1-1/2" THREAD LENGTHS - THRU-FEED EQUIPMENT. UP TO 11" STANDARD DIE SPEEDS. (7) 108 TO 720 RPM MAIN MOTOR. 7-1/2 HORSEPOWER.
Daewoo Doosan #Puma-TT2500SY, Multi-Axis CNC Lathe, 10" X, 2.4" Y, 31.5" Z, 15.4" max. turn, 31.5" swing over bed, 30 HP, 3500 RPM, 12-Station, 2004
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Daewoo Doosan
Model: PUMA-TT2500SY
Year: 2004
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-TB CNC Control, 4,028 Hours Cutting ...more
WH Stationary Main Contact Contact Assembly For Db-15, Upper Stud
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DB For Equipment Type DB-15 Unit Amperage 225A Type of Contact Assembly STATIONARY MAIN Shipping Width 6 in Shipping Height 6 in Shipping Depth 6 in Shipping Weight 4 lb.
Featured
500 Ton, Stamtec #S1-500, SSSC press, 17.7" stroke, 31.5" die height, 9.84" slide adj., 11-20 SPM, very good
Visionary Manufacturing Solutions | Rochester, MI
Seller: Visionary Manufacturing Solutions
Location: Grand Rapids, MI
Mfr: Stamtec
Model: S1-500
SALE PRICE $425,000, STAMTEC S1-500 PRESS, The Stamtec S1-500 Press is a high-quality press manufactured by Stamtec in the United States. This press is designed to handle various metal forming tasks and is ideal for deep draw work, this is the press for you. With its durable construction and reliable performance, the ...more
WH Moving Main Contact Assembly For Ds-206s, Lower Stud
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DS For Equipment Type DS-206S Unit Amperage 800A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
100 Ton, Eitel #RP100, 8" Stroke, 38" DLO, 7/8" Adj. Stroke, WR Shaft Attachment, 1980
Liberty Machinery Co | Lincolnshire, IL
Category: Hydraulic Straightening Presses
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Eitel
Model: RP100
Year: 1980
New - 1980, Serial No. 25238, Capacity.110 Tons (100 Tons Metric), Stroke - Maximum.8", Straightening Stroke - Adjustable & Controllable.7/8", Daylight.38" Over Bed, Depth of Throat.13-3/4", Main Bed Area.29" L-R x 19-3/4" F-B, Straightening Bed Area.55" L-R x 10-1/2" F-B, Distance Bed to Floor.20", Speeds:, - ...more
DMG, Mori #NLX-2500SY/700, CNC laser, 36.2" swing, 12" chuck, 3.1" bar, 14.4" dia., 27.7" lgth, M730UM w/ Celos, A2-8, 12 turret, sub spindle, Y-Axis, 2022
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Dmg
Model: NLX-2500SY/700
Year: 2022
Extended warranty till 2027, Sub-Spindle| Y-axis|, The DMG MORI NLX 2500 | 700 is a high-performance CNC mill-turn center featuring Y-axis, sub-spindle, and BMT live tooling for complete part machining in a single setup. Built with rigid box ways and thermal stability, it delivers excellent accuracy and reliability ...more
165" Erbend #MFA4225, 2021
Machine Tool Technologies | Milwaukee, WI
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFA4225
Year: 2021
Make Erbend, Model MFA4225, Year of MFG 2020, Working Length 4200mm (13.75’), Capacity 12g, Upper Beam Stroke 135mm, Folding beam type Combi, Backgauge Depth U Shape, Closed Hem Capacity 20g, Electrics 3 phase, Opening height (without tools) 250 mm, Motor Power (Servo) 2 X 3,5 kW, Transmission system Ballscrew ...more
72" Wagner #LT cold saw sharpener up to 72" dia. capacity, gear driven
Allstate Saws | Aurora, IL
Category: Saw Sharpeners
Seller: Allstate Saws
Location: Aurora, IL
Mfr: Wagner
Model: LT
Used Wagner LT Automatic Saw Sharpener, This automatic machine, featuring a 4-speed indexing drive, will accurately grind any standard number of teeth from 20 to 672, without use of costly index plates. Wheel and indexing strokes for generating the tooth form are cam controlled. The grinding head swivels to permit ...more
GMC #PS-4816GT, Gang Type Metal Powered Slitter with programmable cut to length
Wheeler Machinery Sales | Pomona, CA
Category: Slitters
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: PS-4816GT
GMC Gang Type Metal Powered Slitter with programmable cut to length, Model # PS-4816GT, 48 x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phase, with NC programmable cut to length, 5 touch screen, ISO 9001 certified, American design and Taiwan quality machine, Slit and cut to length in one unit, NC ...more
Fuji Sangyo #FM-VG-10, High Shear Mixer, Stainless Steel, 10 liter, 2.2 kW main, 0.75 kW chopper, 1998
Federal Equipment Company | Cleveland, OH
Category: Granulators
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Fuji
Model: FM-VG-10
Year: 1998
Used 10 Liter Fuji Sangyo high shear mixer, model FM-VG-10, stainless steel construction, 2.2 kw main blade, 0.75 kw chopper motor, XP design, serial# 873146, built 1988.
Featured
250 Ton, Stamtec #S2-250, straight side double crank press, 9.8" stroke, 22" die height, 5.9" adj., 20-50 SPM, excellent
Visionary Manufacturing Solutions | Rochester, MI
Seller: Visionary Manufacturing Solutions
Location: Grand Rapids, MI
Mfr: Stamtec
Model: S2-250
SALE PRICE $165,000, STAMTEC S2-250 PRESS, The Stamtec S2-250 Press is a high-quality press manufactured by Stamtec in the United States. This press is designed to handle various metal forming tasks and is ideal for small to medium-sized stamping jobs. With its durable construction and reliable performance, the ...more
250 Ton, Stamtec #S2-250, hydraulic press, 9.8" stroke, 22" die height, 5.9" slide adj., 50 HP, 20-50 SPM, excellent
Visionary Manufacturing Solutions | Rochester, MI
Category: Hydraulic Presses
Seller: Visionary Manufacturing Solutions
Location: Grand Rapids, MI
Mfr: Stamtec
Model: S2-250
SALE PRICE $165,000, STAMTEC S2-250 PRESS, The Stamtec S2-250 Press is a high-quality press manufactured by Stamtec in the United States. This press is designed to handle various metal forming tasks and is ideal for small to medium-sized stamping jobs. With its durable construction and reliable performance, the ...more
WH Moving Main Contact For Db-50
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DB For Equipment Type DB-50 Unit Amperage 1600A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
Quick #L-HLPP-2-20-43-8-12, hydraulic Cold press, 2-sided, 20.3' L x 43.3" H x 12" width, (14 & 21) 100 mm diameter x 80 mm stroke cylinder, 10 HP, 2026, new'
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quick
Model: L-HLPP-2-20-43-8-12
Year: 2026
QUICK L-HLPP-2-20-43-8-12.2-Sided Hydraulic Laminating Press: -- Number of working sections: (2) -- Working width, section #1: 6" and 8" -- Working width, section #2: 8", 10"; and 12" -- Maximum working length: 6,200mm (20.3') -- Maximum working height: 1,100mm (43.3") -- Pressure at the glue line: Up to 175 ...more
2500 Amps, Square D power style switchboard main breaker 600 V.AC w/LSIG, 7-MEF Dist Breakers
EMSCO | Fridley, MN
Seller: EMSCO
Location: Fridley, MN
Mfr: Square D
Square D Power Style Switchboard:, 2500 amp main breaker600 volt AC3 phase4 wireLSIG functionsGround fault interrupterRating plugcat# RP100NEMA 3R outdoor, Pull section & breaker distribution sections, (5) MEF36400LIG400 Amp600 Volt ACLIG Functions400 Amp Sensor (Frame)Rating PlugCat# RP100(2) MEF36600LSG600 ...more
JUST ADDED!
110 Ton, MAQ #WE67K-110x3700, Hydraulic Press Brake, 12' overall, 125" between housing, 12.5" throat, 5.9" stroke, 17.7" open, Delem Control, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Model: WE67K-110X3700
110 Ton X 12’ Hydraulic Press Brake with Delem Touchscreen Control, Linear Guideway + Ballscrew for Backgauge, DSP Laser Safety Front, LED Work Lamp, Fixed Supports, Fence with Limit Switch, Foot Pedal and Standard Punch & Die Set., Nominal Pressure: 110 Tons, Worktable Length: 145”, Distance Between ...more
WH Stationary Main Contact Assembly For Wli / Mvs, 5/15 KV 600 Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family MVS Product Family WLI For Equipment Type SWITCH Unit Amperage 600A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
Cincinnati #2M, horizontal mill w/vertical head, 10-1/2" x53" table, 5 HP, #50 taper, #77029
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: -2ML
SERIAL. E712Z, MODEL. 2M, AREA OF TABLE. 53" X 10-1/2", SPINDLE SPEEDS. 20 TO 417 RPM, LONGITUDINAL & CROSS FEEDS.5 TO 20 IPM, LONGITUDINAL TRAVEL. 24", CROSS TRAVEL. 10", VERTICAL KNEE TRAVEL. 13", TAPER IN SPINDLE. #50, COOLANT. YES, VERTICAL HEAD ATTACHEMENT. YES, MAIN MOTOR. 5 HORSEPOWER.
Fp Moving Main Contact Assembly New For Li Switch, 600a, 5-15kv, 40k Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Federal Pacific
Manufacturer Federal Pacific / Federal Pioneer Product Family LI For Equipment Type LI SWITCH Unit Amperage 600A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
Rietz #RSP-16-K2, Continuous Screw Dewatering Press, 16" diameter Screw, 3 HP Cone Motor
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Rietz
Model: RSP-16-K2
Used Rietz model RSP-16-K2 horizontal continuous screw dewatering press. 16" diameter screw. Stainless steel contact parts. 3 HP Cone motor., Requires main drive motor and gearbox. Mounted on I-beam steel base, 1972 RIETZ RSP-16-K2.
Sharples #P660, Stainless Steel decanter centrifuge
EcReCon Inc. | Pedericktown, NJ
Category: Decanter Centrifuges
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Sharples
Model: P660
, Sharples P660 Decanter Centrifuge. s a stainless steel bowl with a maximum speed of 6,000 RPM, generating up to 3,070 G's of force. The P660 uses an internal scroll conveyor to move dewatered solids to one end and discharge liquid from the other. Driven by a 5 HP main motor and a 1.5 HP back drive with a ...more
7.5 HP, Worthington #15T-2, air compressor, 30 cfm, 125 psi, 2 cylinder/2 stage, 7.5 HP, 1745 RPM
Yoder Machinery Sales | Holland, OH
Category: Tank Mounted Air Compressors
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Worthington
Model: 15T-2
SERIAL. AU732, MODEL. 15T-2, CFM. 30, MAXIMUM PRESSURE. 125 PSI, COMPRESSOR. 2-CYLINDER / 2-STAGE, RPM. 1745, MAIN AIR TANK CAPACITY. 80 GALLON, MOTOR. 7.5 HORSEPOWER.
Wheelabrator #CMB-80, 50 HP, rotary drum shot blast, skip loader
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Wheelabrator
Model: CMB-80
MODEL #: CMB-80, SERIAL #: 137600, ROTARY DRUM SHOT BLAST, 50 HP MAIN MOTOR, 3000 RPM, SKIP LOADER, SHOT RECLAIM, UPPER AND LOWER SHOT ELEVATOR, PART EXIT DISCHARGE CONVEYOR / TABLE.
Flottweg #Z4E/4-901g, Solid Bowl Decanter Centrifuge, Alloy, single lead conveyor, 3200 RPM Bowl, 30 kW, 400 V, 2001
Aaron Equipment Co | Schaumburg, IL
Category: Decanter Centrifuges
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Flottweg
Model: Z4E/4-901G
Year: 2001
rebuilt- flottweg z4e/4-901g solid bowl decanter centrifuge. alloy 2.4602 construction (product contact areas); maximum bowl speed 3200 rpm; approximate single lead conveyor with welded hard facing; back drive with powerpack; feed pipe; lubrication system; adjustable liquid plate dams; approx. 30 kw; 400/3/50/2956 rpm ...more
Featured
Hosokowa Bepex #MS-36, 2-roll compactor, 12" dia. x 5" wide smooth rolls, Stainless Steel, 36 tons, 10 HP main, 5 HP Crammer screw feed, #1272695
Plantex Equipment Co | Alvin, TX
Seller: Plantex Equipment Co
Location: Houston, TX
Mfr: Bepex
Model: MS-36
Year: 2002
Bolinger #230A, briquetter, 32" dia x 15" wide rolls, 2" x 1-3/8" pockets, 300 HP, 50 HP feeder, #1272582
Plantex Equipment Co | Alvin, TX
Seller: Plantex Equipment Co
Location: Alvin, TX
Mfr: Bolinger
Model: 230A
Year: 1998
JUST ADDED!
Rotary Drum Vacuum Filter, 47.24" drum diameter x 35., 8 sectors, 30 drum oscillations/min., 2019
Hariton Machinery Co Inc | Bridgeport, CT
Category: Rotary Vacuum and Pressure Filters
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Year: 2019
Drum Diameter 1200mm Main Drum Length 900mm Number of Sectors 8 Number of Oscillations 30/min. Dimensions 4820 x 2165 x 2580 mm Weight 2900 kilograms, The Filter consists of:, Drum consisting of a horizontal cylindrical casing closed at both ends by flat bottoms and ribs and reinforcement rings. The drum is divided ...more
Fluid Air #007, Hammer Mill, Stainless Steel, screw feeder 1 hp, missing screw, 10 hp, 230/460 volt, explosion proof, main shaft motor, on stainless steel base
Federal Equipment Company | Cleveland, OH
Category: Pulverizers and Hammermills
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Fluid Air
Model: 007
Used Fluid Air hammer mill, model 007, stainless steel construction, screw feeder driven by 1.5 hp, 230/460 volt xp motor, missing screw, 10 hp, 230/460 volt, XP, main shaft motor, on stainless steel base, serial# 10034.
25" x 0.187" Bradbury #RS4-25-5, power straightener, (5) 4" rolls, 2 speed reducer
D & H Machinery Inc | Toledo, OH
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Bradbury
Model: RS4-25-5
Bradbury Powered Straightener:, -Capacity: 25" x 0.187", -Model: RS4-25-5, -Number of Rolls: 5 (2 over 3), -Powered Driven Pinch Rolls, -4" Diameter Straightening Rolls, -25" Maximum Material Width, -2 Speed Reducer, -7.5 HP AC Main Motor, -In Storage: Toledo, OH.
70000 lb. Bushman #M9604, Coil Upender, Pendant Control, 2-Chain, 7.5 HP, 2015
Yoder Brothers Machinery | Toledo, OH
Category: Upenders and Downenders
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Bushman
Model: M9604
Year: 2015
Weight16000 pounds, SERIAL. 38540, YEAR NEW. 2015, MODEL. M9604, CAPACITY. 70,000 LBS (35 TON), ROTATION CYCLE TIME. 33 SECONDS, ROTATION CONSTRUCTION. RACK & PINION -> ROLLER CHAIN, DUAL CHAINS. YES, PENDANT CONTROLLED. YES, MAIN MOTOR. 7.5 HP.
3 Ton, Munck Top Running Trolley Hoist, 60" trolley gauge, 26" overhead clearence, 25' lift, 6 HP
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Munck
CAPACITY.: 3 TON, TROLLEY GAUGE.: 60", OVERHEAD CLEARENCE.: 26", LIFT.: APPROX 25', MAIN HOIST:, HP.: 6 HP, 460/230 VOLT, 9/18 AMPS, 1640 RPM, Machine Type.Cranes, Hoists Manufacturer.MUNCK Model.N/A Year.N/A Condition.Used.
8" Strausbaugh #6BG, Polishing Lapping Machine, pneu down pressure, variable speed eccentrics
Wheeler Machinery Sales | Pomona, CA
Category: Lappers Lapping Machines
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Model: 6BG
Strasbaugh 6BG Polishing/Lapping Machine #7673 #1, Diameter Plate: 8", Plate Height: 1/5", Number of Eccentrics: 2, Eccentric Travel 16", Eccentric Speeds: 10-140 RPM (Both), Main Motor: 1/2 HP, Pneumatic Down Pressure, Variable Speed Eccentrics.
54" Nagel #TF4-20, CNC tape lapping machine, 6 lapping arms, 4 lobe arms, 2 bearing arms, 2010
Revelation Machinery | Chicago, IL
Category: Lappers Lapping Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nagel
Model: TF4-20
Year: 2010
Make: Nagel, Model: TF4-20, Year: 2010, Machine Location: Michigan, Maximum Camshaft Length: 54 inches, Lapping Arms: 6, Lobe Arms: 4, Main Bearing Arms: 2, Lapping Arm Slide Carriage Travel: 54 inches.
Nagel #TF4-20, CNC Tape Lapping Machine, 54" L, 2010
Revelation Machinery | Chicago, IL
Category: Lappers Lapping Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Nagel
Model: TF4-20
Year: 2010
Make: Nagel, Model: TF4-20, Year: 2010, Machine Location: Michigan, Maximum Camshaft Length: 54 inches, Lapping Arms: 6, Lobe Arms: 4, Main Bearing Arms: 2, Lapping Arm Slide Carriage Travel: 54 inches.
6 Ton, Denison #DF6C09C20A59A46, hydraulic C-frame press, 6" stroke, 6" throat
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Denison
Model: DF6C09C20A59A46
SERIAL. 7044 P7, MODEL. DF6C09C20A59A46, CAPACITY. 6 TON, STROKE OF RAM. 6", DEPTH OF THROAT. 6", MACHINE 6 STATION INDEX TABLE, DIAMETER OF INDEX TABLE. 21", DISTANCE RAM TO TABLE. 5", 5 HORSEPOWER MAIN MOTOR.
Jagenberg #Diana-105-1, Folding Box Gluer, straight line, 105 cm max Blank width, 1983
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Folder Gluers
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Jagenberg
Model: DIANA 105-1
Year: 1983
1983 JAGENBERG DIANA 105-1 FOLDING BOX GLUER, - Max blank width 105cm, - Straight line gluer, - Tooling Included, - Glue wheels for Crashlock cartons, - New main motor and pumps, - All electronic safety barriers, - Various spare parts.
10' x 1/2" Bertsch #9, plate bending rolls, 13" roll diameter, air drop end, geared adjustment rear roll
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bertsch
Model: 9
SERIAL., MODEL. 9, CAPACITY. 10' X 1/2", ROLL DIAMETER. 13", AIR DROP END. YES, LOWER ROLLS. GROOVED LONGITUDINALLY, REAR ROLL. GEARED ADJUSTMENT, ADJUSTMENT MOTOR. 7.5 HP, MAIN MOTOR. 15 HP.
10' x 5.9" Hugh Smith, vertical plate roll, 1200 ton
Prestige Equipment Corp | Melville, NY
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Hugh Smith
, Maximum Tonnage Capacity: 1200 Tons, Maximum Plate Width: 120", Main Roll Diameter: 23", Maximum Plate Thickness: 5.90", Maximum Bolster Width: 22.99", NOTE:, Inspect Under Power In Plant.
6" Powermatic #300, bench top belt/disc sander, 12" disc, 18" length, 45° tilt, 1 HP
Yoder Machinery Sales | Holland, OH
Category: Belt Sanders
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Powermatic
Model: 300
MODEL #300, BELT WIDTH. 6", LENGTH OF. 18", DISC SIZE. 12", DISC TABLE TILTS. 45 DEGREES, GUIDE ON BELT TILTS. 45 DEGREES, 1 HORSEPOWER MAIN MOTOR.
18" x 20.75" HEM #VT100HLA-60TS, Auto vertical bandsaw, 15' 6" x 1.25" x .042" blade, 2012
Southern Fabricating Mchy Sales | Lithia, FL
Category: Vertical Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Hem
Model: VT100HLA-60TS
Year: 2012
18” X 20.75” Automatic Vertical Bandsaw with Swing-Away Control Console with 8” Touch Screen, Computer Controlled Feed System, Powered Programmable Tilt with Angle Readout, 4° Removable Arm Cant, Vise - Full Stroking Main & Feed, Adjustable Clamping Force, Powered Guide Arm, Variable Speed ...more
1/2" x 10' Cincinnati #500, hydraulic power shear, 48" Back Gauge, (2) squaring arm, 40 HP, 13 hold downs
Master Machinery LLC | Detroit, MI
Category: Power Squaring Shears (Inch)
Seller: Master Machinery LLC
Location: Detroit, MI
Mfr: Cincinnati
Model: 500
, Manufacturer Cincinnati Model 500 Condition Used Stock Number 11341 Capacity 1/2" Mild Steel Back gauge depth 48" Cutting length 120" (2) Squaring arms, 40 hp main motor, 13 Hold downs.
5/16" Snow #NT-2, Single Spindle Nut Tapper, 5/16" stroke, 4000 tapped holes per hr., 100 lBS, speed cut head, vibratory bowl feeder
National Machinery Exchange | Newark, NJ
Category: Nut Tappers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Snow
Model: NT-2
5/16" SNOW MODEL NT-2 SINGLE SPINDLE NUT TAPPER, #6 TO 5/16" RATED CAPACITY IN MILD STEEL, 2" TAP HEAD STROKE, 4000 TAPPED HOLES PER HOUR, 70-100 lBS. MAIN AIR LINE PRESSURE, SPEEDY CUT st1-ku HEAD AND VIBRATORY BOWL FEEDER, 750 Lbs, (7 AVAILABLE - SINGLE SPINDLE).
70" x 100" x 7", Roll-out bed plate, main plate 2.5" thick, inline 4" x2.5" dia wheels, #2683
Icon Industries, Inc | Grand Rapids, MI
Category: Floor Plates and Bed Plates
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Model: ROLL-OUT BED PLATE
70" L to R x 100" F to B x 7" tall. Main plate is 2.5" thick. At each corner are two in-line 4" x 2.5" diameter steel wheels. Wheels can be raised/lowered hydraulically. Several drilled and taped holes approx. 7,000 pounds. Item #2683.
1/4" - 4.5" Continental #3A, Pipe & Tube Cut-Off Machine, Pneumatic, 2 HP
Wheeler Machinery Sales | Pomona, CA
Category: Tube and Pipe Cut Off Machines
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Continental
Model: 3A
Continental 3A Pipe & Tube Cut-Off Machine #7405 #1, Type: Pneumatic, Tube Diameter (OD): to 4-1/2, Wall Thickness: up to 3/8, Dimensions: 28 x 40 x 56, Main Motor: 2 HP, Continental Model 512 Infeed Table.
Ransohoff #Leanjet-RB, parts washer
Liberty Machine Works | Preston, ID
Category: Automated Batch Washers
Seller: Liberty Machine Works
Location: Preston, IA
Mfr: Ransohoff
Model: LEANJET-RB
This nice parts washer has been in storage fro several years, but remains in good condition!, Located at our warehouse in Preston, Idaho., We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various ...more
Cam-Wood #CM-530CNC-4S, CNC Dovetail Machine, 1" - 20-7/8" working width, 3/8"-1" thickness, 2 HP, 20,000 RPM, Syntec CNC, 2026
Ex-Factory | Charlotte, NC
Category: Dovetail Wood Joint Machines
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CM-530CNC-4S
Year: 2026
CAM-WOOD CM-530-4S CNC CONTROLLED DOVETAILEROperators can choose the models according to demands, able to change or design wood materials variously, set the working speed, sizes of tenons & mortises, intervals by simple human operation interface. The files can be saved for repeat use. Heavy steel frame and ...more
12" Timesavers #113, 1-Head Wide Belt, Single drum, 7.5 HP main, 6" diameter Drum, 8" opening capacity, 0.5 HP feed, 12" conveyor extension
Ex-Factory | Charlotte, NC
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Timesavers
Model: 113
TIMESAVER - 113,.12" Width Single-Head Wide Belt Sander12" Width cap., single drum.: -- 12" Width capacity. -- 7.5 HP Main motor. -- 6" Dia. drum. -- 0 - 8" Opening capacity. -- 0.5 HP Feed motor. -- Complete with: Posi-Trac electronic tracking and a 12" conveyor extension.
Silver #SF-45A, Sliding Table Saw, 10' table, (2) cutting speeds 3800 & 5200 RPM, 2015
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Silver
Model: SF-45A
Year: 2015
Model SF-45A, 600 V / 3 Ph / 60 Hz, 10ft table, 8.5 HP main motor provides(2) cutting speeds 3,800 & 5,200 RPM.
Allen Bradley Moving Contact Assembly For Air Contactor
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Allen-Bradley
Manufacturer Allen Bradley Product Family For Equipment Type CONTACTOR Unit Amperage Type of Contact Assembly MOVING MAIN Shipping Width 6 in Shipping Height 6 in Shipping Depth 6 in Shipping Weight 3 lb.
Allen Bradley Stationary Contact Assembly For Air Contactor
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Allen-Bradley
Manufacturer Allen Bradley Product Family For Equipment Type CONTACTOR Unit Amperage Type of Contact Assembly STATIONARY MAIN Shipping Width 6 in Shipping Height 6 in Shipping Depth 6 in Shipping Weight 2 lb.
1000 Amps, Siemens #WB31000B, Power Mod Breaker Module, 240 VAC 3 Phase 1200A Bus
OK Sales Inc | Burlington, NC
Category: Electric Meter Sockets
Seller: OK Sales Inc
Location: Burlington, NC
Mfr: Siemens
Model: WB31000B
Siemens WB31000B Power Mod Breaker Module 1000 Amp 240 VAC 3 Phase 1200A Bus, Brand: Siemens MPN: WB31000B Model: Power Mod Type: Breaker Module 1000 Amp 240 VAC 3 Phase Main bus rating: 12000 AmpBreaker MPN: NXD63B100Dimensions: 67" x 12" x 16".
Eaton Cutler-Hammer, power distribution center (PDC), 1600 amp main, 2-400 amp & 4-100 amp, like new
Lenmark Industries | Langley, BC
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Eaton
SKU: 138139, Condition: Used - Like New, S/N: M200235-01.001, Dimensions: 107.00 (H) x 52.00 (W) x 135.00 (L) inches, Additional :, Configuration:, - 1600A Main Switch Fused to 800A, - 2 x 400A Disconnects Fused to 200A, - 4 x 100A Disconnects Fused to 100A.
15 KV WH Vcp-w Indoor Switchgear Top Pt Compartment, Bottom 2000 Amps Breaker Compartment
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family VCP-W Type of Medium Voltage Indoor Vacuum Switchgear VCP-W Switchgear Voltage 15000 Main Bus Amps 2000A Switchgear Control Switch Circuit Breaker Control Switchgear Control Switch Selector Misc Control Part HEATER Switchgear Current Transformer Rating 2000A ...more
S&c 600 Amps Moving Contact Assembly
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: S&c Electric Co
Manufacturer S&C Product Family Type of Current Carrying Part MOVING MAIN Unit Amperage 600A For Equipment Type SWITCH Shipping Width 22 in Shipping Height 22 in Shipping Depth 12 in Shipping Weight 25 lb.
600 Amps Ite/gould Back Connected Stationary Main Contact/insulator Assembly For Hplc Interrupter Switch, 15kv, 600a, 61k Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Manufacturer ABB / ITE / BBC Product Family HPLC For Equipment Type HPLC SWITCH Unit Amperage 600A Type of Contact Assembly STATIONARY MAIN Shipping Width 18 in Shipping Height 18 in Shipping Depth 18 in Shipping Weight 25 lb.
1000 lb. Skyjack #SJ11-4626, electric scissor lift, 43" x 83" platform, 26' max lift, 32' max working height
Yoder Machinery Sales | Holland, OH
Category: Scissor Lifts
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Skyjack
Model: SJ11-4626
SERIAL. 75299, MODEL. SJ11 4626, CAPACITY. 1000 LBS, MAXIMUM WORKIG HEIGHT. 32', MAXIMUM LIFT. 26', AREA OF PLATFORM. 43" X 83", GROUND CLEARANCE. 3-1/2", MAX SPEED. 2 MPH, LIFT TIME. 54 SECONDS, TURNING RADIUS. 7'9", PENDANT CONTROL. YES, BATTERY OPERATED. 24 VOLTS, NON MARKING TIRES. 16" X 5" X 12", LIFT ...more
Genie Industries GS2032 G84, Lift Scissor, 176 hours, S/N: GS3215A-138100, 2015
Boyd Cat Company | Parkersburg, WV
Category: Scissor Lifts
Seller: Boyd Cat Company
Location: Dry Ridge, KY
Mfr: Genie Industries
Model: GS2032 G84
Year: 2015
(STOWED) 39"H X 96"L X 32"W, 24V (FOUR 6V 245AH BATTERIES), EXTENSION DECK LIFT CAP: 250 LBS, FREIGHT, LIFT CAPACITY: 800 LBS, MOTION ALARM, NON MARKING TIRES 15 X 5 X 11, PLATFORM EXTENDED: 128", PLATFORM HEIGHT: 20 FT, PLATFORM LENGTH: 89", WEIGHT: 3,438 LBS.
.036" x 4' Stirlich, hydraulic shear, 170 SPM, heavy duty hydraulic cylinders, 2000
HCI Machines | Venetia, PA
Category: Power Squaring Shears (Inch)
Seller: HCI Machines
Location: Venetia, PA
Mfr: Stirlich
Year: 2000
48" WIDE x.036 STIRLICH HYDRAULIC SHEAR SERIAL #: -Four (4) side high carbon - high chrome shear blades, upper bowtie, lower straight rake blade. -170 Stroke Per Minute - 40 Cuts Per Minute -Shear ram actuated through two (2) heavy duty hydraulic cylinders and rides on replaceable bronze wear plates. -Rack & ...more
600 Amp, G & W, No. FPRAM33-376F-40PI, 15500 Volts, FUSED, 3-WAY, GAS
Belyea Company Inc | Easton, PA
Category: Gas Switches
Seller: Belyea Company Inc
Location: Easton, PA
Year: 2002
CB-18892:, ONE (1) 600 AMP G & W 3 WAY GAS INSULATED PADMOUNT SWITCH, TYPE FPRAM33-376F-40PI, 13.8KV NOM, 15.5 KV MAXIMUM, 110 KV BIL, AC - 1 MIN. WITHSTAND @ 34 KV, DC - 15 MIN. WITHSTAND @ 53 KV, 40 KA MOMENTARY RMS ASYM, 40 KA MAKING RMS ASYM, 1 SEC. RATING RMS ASYM, 200 MAX. FUSES, 2 SWITCHES/1 SET OF FUSES ...more
Citizen #A20-VIPL, CNC Swiss type lathe, 7-Axis, Fanuc Control, Edge Tech C-320 barfeed, coolant system, 2007
Premier Equipment Inc | Altamonte Springs, FL
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Citizen
Model: A20-VIPL
Year: 2007
Citizen Cincom A20VIPL CNC Swiss-Type Lathe / Citizen Cincom A20 VIPL (subject to buyer verification):number of axes: 7maximum turning diameter (main spindle): 20 mm (.787”)maximum turning length: 165 mm (6.49”)maximum turning diameter (sub-spindle): 20 mm (.787”)maximum capture length: 80 mm ...more
Mazak #Quick-Turn-Nexus-250-II, CNC Lathe, 24" swing, 13.78" turning diameter, 18.73" max. turning length, 10" chuck, 3.46" bore, A2-8, 35 HP, 4000 RPM, 12 tool, Mazatrol Matrix control, tailstock, **
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mazak
Model: QUICK TURN NEXUS 250-II
Year: 2008
2008 MAZAK QUICK TURN NEXUS 250-II CNC Lathe. s 24" swing, 10" chuck, 35 HP, and 4,000 RPM. Mazatrol Matrix Nexus CNC and chip conveyor., Chuck Size: 10", Swing Over Bed Ways: 24", Max. Turning Diameter: 13.78", Max. Turning Length: 18.73", Speeds: 4,000 RPM, Bore: 3.46", Bar Capacity: 3", Nose: A2-8, Main Motor: 35 ...more
Mazak #VTC-30C, CNC vertical machining center with rotary table,Mazatrol M-Plus Control, 65.3" X, 29.9" Y, 26" Z, 24 automatic tool changer, 8000 RPM, 1998
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: VTC-30C
Year: 1998
Mazak VTC30C CNC Mill with Rotary Table (subject to buyer verification):Table Size: 78.74″ x 29.92″Table Load Capacity: 3000 lbsX Axis Travel: 65.35″Y Axis Travel: 29.92″Z Axis Travel: 26.00″Distance Spindle Nose to Table Top: 5.8” – 31.8”Magazine Capacity: 24 ATCRapid ...more
Sa Moving Main Contact Assembly For Rl-3200
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Siemens-Allis
Manufacturer Siemens / Allis Chalmers Product Family RL For Equipment Type RL-3200 Unit Amperage 3200A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 20 lb.
18" x 50" United #SS1000, decanter centrifuge, 60 HP, 80:1 gearbox, 5° beach
Sully Enterprises | West Jordan, UT
Category: Decanter Centrifuges
Seller: Sully Enterprises
Location: West Jordan, UT
Mfr: United
Model: SS1000
Inventory 701021, Qty 1, United SS1000, Freshly reconditioned and converted to a full variable machine with inline scroll drive motor!, 60HP Main drive, 20HP back drive, SA69 80:1 Gearbox, 18 x 50 inch Bowl, 5° beach, Hardfaced scroll, Fresh rebuild on RA & Balancing (FINISHED 9/17/24), Sitting in the Houston ...more
8.25 Kv Ch Vcp-t / T-vac Cassette 1200a, New Style
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Cutler-Hammer
Manufacturer Westinghouse / Cutler Hammer Product Family VCP-T Type of Medium Voltage Indoor Vacuum Switchgear VCP-T Switchgear Voltage 8250 Main Bus Amps 1200A Feeder Bus Amps 1200A Shipping Width 30 in Shipping Height 30 in Shipping Depth 35 in Shipping Weight 175 lb.
Mazak #FH-1080, horizontal machining center, 160 automatic tool changer, 64.6" X, 51" Y, 48" Z, 7000 RPM, #50, 50 HP, Fusion 640M, 2000
Machnet | Santa Monica, CA
Category: Horizontal CNC Machining Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: FH-1080
Year: 2000
Mazak FH-1080 3-Machine Cell w/ 16 Pallets, Mazak FH-1080 Horizontal Machining Center - 3 Machine Cell, New: 2000, Travels:, X-Axis: 64.6", Y-Axis: 51", Z-Axis: 48", B-Axis: 0.001 N/C Contouring, Pallet Size: 39.3" x 39.3", Number of Pallets: 16, Pallet Weight Capacity: 6600 Lbs, Rapid Traverse Rates: 944/944/787 IPM ...more
30 gallon Morton Mixtruder, #13836
Federal Equipment Company | Cleveland, OH
Category: Sigma Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Morton
Used 30 gallon Morton Mixtruder, model BD.4, carbon steel construction, extruder discharge with 10 HP motor, sigma blades with 15 HP main motor, with cover, serial# 22853M, 1981.
3" x 3" x .312" Geka #Bendicrop-50, universal ironworker, 50 Ton or 55 Ton, NEW
Smith Machinery Co | Ames, IA
Category: Ironworkers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Geka
Model: BENDICROP-50
Punching Station:, Capacity: 55 US Tons, Ø1-1/16” in ½”, Maximum Round Punch that can be held Ø1-1/4”., Optional Attachments up to 4”, Throat Depth: 6-7/8”, Working Height: 37-13/16”, Safety:, •Single Stage Foot Pedal, •Stripper Open Safety with slow ...more
Smart Machine Tool #NL2000-ASY, CNC Lathe, 31.8" swing, 29.53" machining length, 16.18" max. turning diameter, 6" chuck, 25 HP, 6000 RPM, Fanuc 0I-TF CNC, 2020
Trader Machinery Inc | Concord, ON
Category: CNC Lathes and Turning Centers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Smart Machine Tool
Model: NL2000 ASY
Year: 2020
31.89"16.18"29.53"2"25 HP12,566 LBS.6000 RPM.
Scanware Electronic Vision Inspection Controller LYNX-SPECTRA BW PN: 208.405.00.01.079 24 VDC, 1.5A
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Scanware Electronic
Used in pharmaceutical blister packaging lines for product quality control, the scanware electronic LYNX-SPECTRA BW is a black-and-white vision inspection system controller rated at 24V DC, 1.5A. Part number 208.405.00.01.079, article number 095.20.40.01, manufactured in Germany on 18.05.2020., The unit houses three ...more
Sa Stationary Main Contact Assembly For Rl-3200
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Siemens-Allis
Manufacturer Siemens / Allis Chalmers Product Family RL For Equipment Type RL-3200 Unit Amperage 3200A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 20 lb.
Ch Moving Main Contact Assembly For Mds 800-1600a, 65k Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Cutler-Hammer
Manufacturer Westinghouse / Cutler Hammer Product Family MDS For Equipment Type MDS Unit Amperage 1600A Unit Amperage 800A Type of Contact Assembly MOVING MAIN Shipping Width 8 in Shipping Height 8 in Shipping Depth 8 in Shipping Weight 10 lb.
300 Amps, Miller #SRH-303, stick welder, 240 V.
Smith Machinery Co | Ames, IA
Category: Arc Welders
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Miller
Model: SRH-303
Main Voltage 240 Secondary 32 VOLTS, 300 AMPS, 60% DUTY CYCLE, 80 MAX. OCV, 90C TEMP. RISE..
12000 lb. Rowe #12050-DSC, uncoiler, 50" width, 60" outside dimensions, 20"-24" ID, motorized expansion
Yoder Machinery Sales | Holland, OH
Category: Uncoilers and Centering Coil Reels
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rowe
Model: 12050-DSC
SERIAL. 12219, MODEL. 12050-DSC, CAPACITY. 12,000 LBS, COIL WIDTH. 50", MAX COIL O.D. 60", COIL I.D. 20" TO 24", EXPANSION. MOTORIZED, HOLD DOWN ARM. YES, LEAFS. 4, RUN/JOG. YES, FORWARD & REVERSING. YES, OPERATOR STATION. STAND ALONE, EXPANSION MOTOR. 1-1/2 HORSEPOWER, MAIN MOTOR. 5 HORSEPOWER.
37" x 60" Ramco #37T, wide belt wet sander, 20 HP, 0-80 FPM, pneumatic belt tension, 2005
Westbrook Engineering Co | Warren, MI
Category: Belt Sanders
Seller: Westbrook Engineering Co
Location: Warren, MI
Mfr: Ramco
Model: 37T
Year: 2005
For sale: RAMCO SANDERS 37T, 2005 model, used condition. s a 37"x60" belt, 6" max material thickness, 20 HP main motor, 0-80 FPM speed, pneumatic belt tension. Includes blower system, paper filtration, manual table adjustment. 480V 3 phase power., Brand: Ramco, Model: 37T, Belt size: 37"w X 60" around, Max material ...more
Ch Moving Main Contact Assembly For Mds 2500-3200a, 65/85/100k Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Cutler-Hammer
Manufacturer Westinghouse / Cutler Hammer Product Family MDS For Equipment Type MDS Unit Amperage 3000A Unit Amperage 3200A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 15 lb.
Fp Moving Main Contact Assembly For Li Switch, 600a, 5 KV
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Federal Pacific
Manufacturer Federal Pacific / Federal Pioneer Product Family LI For Equipment Type LI SWITCH Unit Amperage 600A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
Sa Stationary Main Contact Assembly Unused Surplus For Qr Switch, 5/15kv, 600 Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Siemens-Allis
Manufacturer Siemens / Allis Chalmers Product Family QR For Equipment Type QR-36 Unit Amperage 600A Type of Contact Assembly STATIONARY MAIN Shipping Width 8 in Shipping Height 8 in Shipping Depth 8 in Shipping Weight 5 lb.
ITE Stationary Main Contact Assembly For 5hk 350, 1200 Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Ite
Manufacturer ABB / ITE / BBC Product Family HK For Equipment Type 5HK 350 Unit Amperage 1200A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
ITE 600 Amps Moving Main Contact For Kb-600, Steel Back
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Ite
Manufacturer ABB / ITE / BBC Product Family K Type of Current Carrying Part MOVING MAIN Unit Amperage 600A For Equipment Type KB-600 Shipping Width 6 in Shipping Height 6 in Shipping Depth 6 in Shipping Weight 3 lb.
American #12847, horizontal automatic tie baler with Allen Bradley control, 60 HP
Global Equipment International | Chalfont, PA
Category: Horizontal Balers
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: American
Model: 12847
Year: 1991
Used American Auto Tie Baler, Bale Size: 40" x 30" x Variable, Feed Opening: 34" X 30", 8" I.D. Bore x 50" Stroke, Total Ram Thrust: 100,530 Pounds, Main Motor: 60 HP, Good For: OCC, Newpaper, High Grade Paper, Manufacturer AMERICAN Model 12847 Condition Used Stock Number 904345.004 Bale size 40" x 30" x ...more
ITE Black Moving Main Contact Assembly For K-600
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Ite
Manufacturer ABB / ITE / BBC Product Family K-LINE For Equipment Type K-600 Unit Amperage 600A Type of Contact Assembly MOVING MAIN Shipping Width 8 in Shipping Height 8 in Shipping Depth 8 in Shipping Weight 4 lb.
Sa Moving Main Contact Assembly Unused Surplus For Qr Switch, 5/15kv, 600 Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Siemens-Allis
Manufacturer Siemens / Allis Chalmers Product Family QR For Equipment Type QR-36 Unit Amperage 600A Type of Contact Assembly MOVING MAIN Shipping Width 12 in Shipping Height 12 in Shipping Depth 9 in Shipping Weight 10 lb.
WH Moving Main Contact Assembly For Wli / Mvs, 5/15 KV 600 Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family MVS Product Family WLI For Equipment Type SWITCH Unit Amperage 600A Type of Contact Assembly MOVING MAIN Shipping Width 17 in Shipping Height 17 in Shipping Depth 10 in Shipping Weight 10 lb.
ITE Red Moving Main Contact Assembly For K-225
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Ite
Manufacturer ABB / ITE / BBC Product Family K-LINE For Equipment Type K-225 Unit Amperage 225A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
WH Moving Main Contact Assembly For Dk-25
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer For Equipment Type DK-25 Unit Amperage 600A Type of Contact Assembly MOVING MAIN Shipping Width 8 in Shipping Height 8 in Shipping Depth 8 in Shipping Weight 4 lb.
Heidelberg #Mercury, Web Offset Press, (6) Print Unit, (3) Web, 22.75" cutoff x 36" width, 1992
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Web Offset Printing Machines
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Heidelberg
Model: MERCURY
Year: 1992
1992 Heidelberg Mercury, 6-unit web offset press with 22.75" cutoff x 36" width, featuring remote inking, a JF25C folder, Marin splicers, AWS fountain recirculator, Grater rollers, and more. Ideal for newspaper printing needs., 1992 Heidelberg Mercury (6) Unit (3) Web Offset Press, 22.75” cutoff x 36” ...more
ITE Red Stationary Main Contact Assembly For K-1600
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Ite
Manufacturer ABB / ITE / BBC Product Family K-LINE For Equipment Type K-1600 Unit Amperage 1600A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
175 Ton, Niagara #HD175-10-12, Hydraulic Press Brake, 12' overall, 1272" between housing, Hurco Autobend 7 CNC Back Gauge
Aleco Machinery Sales | Milwaukee, WI
Category: Hydraulic Press Brakes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Niagara
Model: HD175-10-12
Pre Owned Niagara HD 175-10-12 Hydraulic Press Brake, New 1983, Capacity 175 TONS, Overall Length of Bed & Ram 12’, Distance Between Housings ` 10’6”, Stroke 10”, Open Height 17”, Closed Height 7”, Throat Clearance 8”, Speeds, Approach 216 INCH PER MINUTE, Form 49 INCH PER ...more
GE Switch Element Assembly For Pif, Load Break Switch
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: General Electric
Manufacturer Electric Product Family PIF For Equipment Type SWITCH Unit Amperage 600A Type of Contact Assembly MOVING MAIN Shipping Width 30 in Shipping Height 30 in Shipping Depth 30 in Shipping Weight 100 lb.
WH Moving Main Contact Assembly For Db-75
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DB For Equipment Type DB-75 Unit Amperage 3000A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
GE Stationary Contact Assembly For Wps-08
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: General Electric
Manufacturer Electric Product Family WAVE PRO For Equipment Type WPS-08 Unit Amperage 800A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
ITE Moving Main Contact Assembly For Kcg-1600
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Ite
Manufacturer ABB / ITE / BBC Product Family K For Equipment Type KCG-1600 Unit Amperage 1600A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
WH Moving Main Contact Assembly For Wli / Mvs, 5/15 KV 1200 Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family MVS Product Family WLI For Equipment Type SWITCH Unit Amperage 1200A Type of Contact Assembly MOVING MAIN Shipping Width 14 in Shipping Height 24 in Shipping Depth 14 in Shipping Weight 40 lb.
250 Ton, Bliss #SC2-250, straight side double crank press, 8" stroke, 10" slide adjustment, 60" x 42" bed area, 30 HP, 1978
Perfection Global | Elk Grove Village, IL
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Bliss
Model: SC2-250
Year: 1978
Tonnage Capacity: 250 TonStroke: 8"Stroke Speed: 20-40 SPMBed Area: 60" x 42"Bed Opening: 50" x 27"Slide Adjustment: 10"Main Motor: 30 HP, UCC-22-1 CushionType D AK Clutch.
0.5 KW Fanuc #Beta-iS-2/4000, AC Servo Motor, 3 Phase, 8-Pole, 4000 RPM, 156 V, 2018
iGAM | Detroit, MI
Category: AC Servo Motors
Seller: iGAM
Location: Detroit, MI
Mfr: Fanuc
Frame: BETA-IS-2/4000
Year: 2008
This listing is for a USED FANUC A06B0061B203#0100 AC servo motor. The A06B0061B203#0100 is a FANUC series servo motor an integrated pulse coder for precise position and speed feedback. This motor is commonly used in FANUC CNC machine tools and industrial automation systems requiring accurate closedloop motion ...more
53" Timesavers #3311-05-2, Bottom Head Calibrating Planer, 60 HP, 45 FPM
RT Machine | Hughesville, PA
Category: Woodworking Planers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 3311-05-2
The Timesavers 3311-05-2 53" Bottom Head Planer is a high-performance industrial woodworking machine designed for precise panel calibration and surface finishing. Ideal for furniture, cabinet, and millwork production, it efficiently flattens solid timber and processes materials like veneer, composites, rubber, and ...more
