Slitters

Paxson Slitter Heads, -(2) Heads, -7.00" Dia. x 64" Face Arbors, -Injector Head Design, -Entry Side Guides, -100 HP DC Motor, 850/1750 RPM, 500 V, -In-Line Reducer w/5.952:1 Ratio, -Pinion Stand w/1:1 ratio, 12" Drive Side Spacing, -Drive Base: 64" Overall Width x 33' Overall Length, (Includes 11' of the Head ...more

P/A INDUSTRIES SLITTER, MODEL: PPR-100, SERIAL NUMBER: XP-316/C1854 Year: 2001 (Never Used), 5" Wide, 1" Arbor, 17 Ft Pounds Of Torque, 115 Volt, Loop Sensor, Forward and Reverse Jog, Adjustable Coil Guide Rails, Entry and Exit Cascade Guide, Replacement Cost: $10,000.00, Approximate Dimensions: 24"L-R x 24"F-B x ...more

Ruesch Model 189 1.25" x 12" Precision Ring Slitter Payoff with Double Recoilers, ARBOR DIAMETER 1.25 inches ARBOR WIDTH 12 inches.

Ruesch Model 149 2.625" x 14" Precision Ring Slitter, ARBOR DIAMETER 2.625 inches ARBOR WIDTH 14.000 inches KNIFE DIAMETER 6.500 STRIPPER RING DIAMETER 7.000 SLITTER POWER 10 HP DC MOTOR SLITTER DIMENSIONS APPROXIMATELY 90" L X 36" W X 60" H SLITTER WEIGHT APPROXIMATELY 3,000 LBS.

Herr Slitter Head, -16" Wide, -4.00" Dia. Arbors, -Parallel Arbor Adjustment, Powered, -3 HP AC Motor Threading Drive, -No Tooling, -Passline: Approx. 41", -Overall Size: 100" L x 22" W, -In Storage.

Waterbury Farrel Slitter - 4.500" Dia x 18" Wide Arbors - Includes Littel Payoff and ADS Recoiler with Overarm Separator, ARBOR DIAMETER 4.500 inches ARBOR WIDTH 18 inches, Waterbury Farrel Slitter with Littel Payoff and ADS Recoiler with Overarm Separator, This line came offline running after seeing low ...more

MODEL #: N/A, SERIAL #: N/A, 30" FACE x 4" DIAMETER ARBORS, PARALLEL ARBOR ADJUSTMENT, AC MOTOR DRIVEN THROUGH MANUAL TRANSMISSION BELT TO ARBORS, 44" PASS LINE, SMALL AMOUNT OF TOOLING INCLUDED, 80" LR x 31" FB x 67" TALL APPROXIMATE DIMENSIONS, GOOD CONDITION.

SERIAL. 3744, ARBOR DIAMETER. 4-1/2", MAXIMUM BETWEEN COLLARS. 28", 28" ENTRY PASSLINE ROLLS., MECHANICALLY ACTIVATED DISENGAGED JAW CLUTCH FOR PULL THRU SLITTING, 7-1/2 HP FEEDUP DRIVE.

-Model #146, -N2059, -(2) Slitter Heads - Crane Removal Type, -4.125" Diameter Arbors, -Ring Slitter Arrangement, -30 HP Reliance DC Motor Drive, 1150/2600 RPM, 240 V (Less Solid State Drive), -Horsburgh and Scott Reducer with 1:1 Ratio, -Belt Driven from Motor, -Slitter Tooling Included, -Removed and in storage: ...more

Stamco Slitter Head, (1) Removable Head Type, 5" Dia. x 30" Face Arbors, Double-Eccentric Arbor Adjustment, Entry Driven Pinch Rolls, 8" Dia. x 30" Face, 15 HP AC Motor, Entry Side Guides, Manual Adjustment, 125 HP GE DC Motor, 650/1900 rpm, 240 V, Falk Reducer w/9.212:1 ratio, rated at 125 HP, Less Slitter Tooling ...more

Stanat Slitter Head, -36" Wide, -3.50" Dia. Arbors, -Parallel Arbor Adjustment, -Threading Drive, -In Storage.

36" Stamco Slitter Head, -4" Dia. x 40.5" Face Arbors, -Entry Passline Roll, -Entry Side Guides, Manual Adjustment, -Double Eccentric Arbor adjustment, -Passline Height: 32.5", -Overall Size: Slitter Head - 126" L x 88" W x 48" High, 5,800 lbs., Drive Base - 60" L x 53" W x 48" High, 3,000 lbs., -In Storage: Toledo, OH.

Paxson Slitter Removable Type Head, -5.00" Dia. x 37" Face Arbors, -Entry Driven Pinch Rolls, -Entry Side Guides, Manual Adjustment, -Parallel Arbor Adjustment, -7.5 HP AC Motor Threading Drive, 1745 RPM, 230/460 V, -5 HP Eaton Dynamatic Ajusto-Spede Drive, 1755 RPM, 230/460 V, Thru Drive-All Model DAU 512 ...more

Material Thickness:.006" -.040" 20 HP (Approximate) DC Motor, 240 Volt Complete with Knives, Spacers and Rubber Stripping Rings *Price reflects the cost for each Slitter Head**, 36"5" Diameter Arbors (2 Heads, One on Line, One Out Being Set Up).

Herr Slitter Head, -36" Wide, -6.00" Dia. Arbors, -Parallel Arbor Adjustment, -AC Motor Threading Drive, -Less Tooling, -In Storage.

(2) - 42" x 6" Yoder Slitter Heads, -Entry Unit:, Powered Entry Pinch Rolls, Manual Side Guides, Powered retraction to accommodate Slitter Head "Swing"., -Slitter Assembly:, Turret Configuration with Powered Rotation, Two (2) Slitter Heads, 6" Diameter Arbors, 43.5" Arbor Face, Powered Outboard Retraction, Top Arbor ...more

42" x 7" Diameter Arbor Cutting Capacities (Stainless Steel): 6 Cuts in.250" at 100 FPM Constant 8 Cuts in.187" at 150 FPM Constant 11 Cuts in.125" at 300 FPM Maximum 15 Cut in.093" at 400 FPM Maximum Slitter Drive Pinion Gearboxes: Main Gearbox (Falk) 4.91:1 Ratio 2 Speed Secondary Gearbox 1.53 & 3:1 Ratios 60 HP ...more

“Normal wear from use.”, Slitter made in Canada, 45″ x 5″ (over all), Capacity…20 gauge and up., Max sheet width…43.5″, Shaft diameter…4″ +/-, – 15 blades., – 600V., – On/Off switch., – Full disconnect., Includes basic tooling!, This machine ...more

-48" Wide, -4.75" Dia. x 50" Face Arbors, -Entry Passline Rolls, 4" Dia. x 56" Face, -Entry Side Guides, Hydraulic Motor Adjustment, -Parallel Arbor Adjustment, -Outboard Support moves in to approx. 26" for Heavier Gauge Slitting, -Hydraulic Motor Driven, -Hydraulic Power Unit Included, -Knives, Spacers and Rubbers ...more

Paxson Slitter Head, -7" Dia. x 49.5" Face Arbors, -Parallel Arbor Adjustment, -Entry Passline Rolls, 5" Dia. x 51" Face, Rubber Covered, -Entry Side Guides, Manual Adjustment, -20 HP AC Motor Threading Drive, 1760 RPM, 220/440 V, -Foote Bros. Reducer w/38.4:1 Ratio, -40" Passline Height, -Powered Opening of Outboard ...more

WIDTH. 48", ARBOR. 7", MOTOR. 125 HP DC.

SERIAL. 41280, MODEL. LD2051, MAXIMUM WIDTH. 51", CAPACITY @ 2 CUTS. 20 GA MILD STEEL, CAPACITY @ 3 CUTS. 24 GA MILD STEEL, SPEED. 43 FPM, PHASE. 1, VOLTAGE. 110, MOTOR HORSEPOWER. 1/3.

, Manufacturer: Loopco, Arbor Width: 54", Arbor Diameter: 7" Heads, Gauge Range:.017"-.187", Motor: 75 HP, DC, Type: Injector, Includes:, (2) Slitter Heads, Motor & Gearbox, Complete set of Tooling, *Line was removed from service recently., *Currently stored in our Toledo, OH warehouse..