Buy or Sell Your Makino A51

SKU: 115864, Model: VLSH1S5R, Condition: Surplus New, Made In: ITALY, Dimensions: 13.00 (H) x 18.50 (W) x 25.00 (L) inches, Additional :, Range: TeSys, Device short name: VLSH, Product or Component Type: Rotary handle, Range compatibility: TeSys (TeSys VARIO LS) VLS3P, Handle colour: Red, Handle front plate colour: ...more

This listing is for a Fanuc A03B-0819-C104#D I/O Module, model designation AID16D I/O Model A, manufactured in Charlottesville, Virginia, USA. The nameplate identifies this as a 24VDC 16-point positive and new logic input module. The unit carries cULus listing (file E157515, guide 8M89) and CE marking. It is rated for ...more

Scotchman 60 Ton Hydraulic H-Frame Press, Model ProPress 66, SKU # 3014000, Capacity 60 Tons, Motor 2 HP, RPM 3000, Ram Speed – Approach 20 ipm, Ram Speed – Press 4 ipm, Ram Speed – Return 25 ipm, Open Height, Minimum 7-3/4”, Open Height, Maximum 37 ¼”, Stroke 15”, Lateral ...more

Make: Inkcups, Model: Helix, Year: 2020, Machine Location: Upon Request, -Speed: Up to 6 pieces per minute, -Part Diameter: 51-114mm, -Part Length: 76-305mm, -Lamp Style: 8W LED, -Ink Type: UV LED, -Ink Configuration: CMYBW, -Print Mode: 6, 12, and 24 Pass, -Bulk Ink System: 3 Liter, -Max Resolution: 1200 dpi, -Bed ...more

;- Foley Work Ready - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, 2022 MODEL, 42" FORKS, 5000LB CAPACITY, LED WORK LIGHTS, LP GAS / GASOLINE, NON-MARKING TIRES, Online Owner's Manual.

The TR UCF209-27 is a square 4-bolt flange mounted bearing unit with a 1-11/16 in. bore. The cast iron housing is marked F209 with the TR brand cast into the upper face, and the insert bearing is stamped UC209-27. The outer race of the insert is additionally marked CHINA. The unit uses a wide inner ring UC209-27 ...more

PRE OWNED diacro model 14-72 hydra power press brake, Serial Number 66007755196, 
Capacity (near bottom of stroke) 35 tons
Overall Length of Bed & Ram 72”
Distance Between Housings: 62"
Stroke: 2"
Ram Adjustment: 3"
Shut Height S.D.A.U.: 9"
Throat Depth: ...more

The Fanuc A06B-6089-H105 is an Alpha series SVU1-80 AC servo amplifier unit manufactured by Fanuc Ltd in Yamanashi, Japan. The nameplate designates this unit as series B. It is designed for use with Fanuc Series 0 CNC controls a PWM type B axes interface. The nameplate specifies a rated main input of 200 to 230V AC at ...more

Live tooling| sub spindle, Used Miyano BNA-42S2 CNC Lathe (2014 ) with Fanuc 0i Control. This machine is built for high-precision, high-volume production of complex turned parts. Featuring twin-spindle capability with back machining, it enables efficient simultaneous cutting and reduced cycle times. Its rigid ...more

;- FOLEY WORK READY - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, 3' EXTENSION DECK, AC POWER TO PLATFORM, DESCENT & TILT ALARM, DUAL FLASHING BEACONS, EE CERTIFICATION, MOTION ALARM, NON-MARKING TIRES, POTHOLE PROTECTION.

12.6” X 25.5” CNC Turning Center with Eurotech - Fanuc EASY Plus Control, 15 Station Turret with Driven Tools, True Y - Axis on Solid Box Ways, ASA 5” Sub - Spindle with Ejector and Coolant Through, Chip Conveyor with 3.5 Bar Wash - Down Coolant Pump, SBS Tool Monitoring System with Combined Toool ...more

Manufacturer Westinghouse / Cutler Hammer Product Family MDS Type of Low Voltage Indoor Air Switchgear POW-R-LINE C Main Bus Amps 1600A.

Timesavers Model 3331-05-333 SP Three Head 52" Single Pad Widebelt/Orbital Sander : Abrasive size (orbital heads): 15 x 52" Main motors: 5, 5, 5HP Maximum width stock: 51" Minimum part length with vacuum bed: 6" Maximum thickness opening: 5" Infeed loading area: 24" Feed speed: 10-30 FPM Passline height: 32-38" ...more

Used CNC Lathe in excellent condition. s 26.8" swing, 22.7" machining length, 3-axis, 8" chuck, and 35 hp. Includes chip conveyor, parts catcher, Mazatrol Matrix Nexus 2 control. Max RPM: 5,000. No tailstock., Chuck 6" (2nd Spindle), 8" (Main Spindle).

Abrasive belt size: 40 x 75, Motorized Table Lift with computer display, Variable Speed Conveyor, Conveyor Forward & Reverse, Belt Safety Overtravel Switches, Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to Re-adjust the tracking system when running extremely out of parallel belts ...more

Cutler-Hammer Pow-R-Line Switchboard; 2500 amp, 480Y.277 volt AC, 3 phase, 4 wire, ground fault indicator, NEMA 3R outdoor rated. New Surplus., 2 Sections: From Left to Right, Empty Panel, Main Breaker/ Distribution Panel, RD 65K Main Breaker Cat# RD325T36W 2500 Amp 480 Volt AC Style #1485D10G24 Digitrip RMS 310 2500 ...more

I.J. White Spiro-Freeze Spiral Freezer. Model: 26-A1–577. s: bolted construction, bottom load “up go" design and an I.J. White control panel. CRam Industrieser hour meter: 28,151 hrs. Belt : 670 ft. L x 26 in. W x 2-1/4 in. H product clearance. Belt material: stainless steel. Drum Frame model: ...more

Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 75 hp, 230/460 volt motor,1800 rpm motor, separator classifier shaft, with 7.5 hp, 230/460 volt motor, on base, serial# 87C5036.

, -PRE-FUSE: 16A, -MAIN SUPPLY VOLTAGE: 460V 3Ph/PE, -FREQ: 60Hz, -CONTROL VOLTAGE: 115VAC, -NOMINAL: 2,0 kW, -CURRENT NOMINAL: 3,5A, -MAIN DRIVE: 1,7 kW 3,0A, -CIRCUIT DIAGRAM #: 01-10000134210, -RPM: 1500, Used RSLER R 430/1100 TE-15 parts washer and finishing machine available. Ideal for polishing and cleaning ...more

The Cipriani Harrison 4" AISI 316L sanitary pneumatic butterfly valve is a quarter-turn actuated isolation valve designed for hygienic process piping systems. The valve body and disc are constructed from AISI 316L stainless steel, a low-carbon grade offering enhanced corrosion resistance suitable for food, beverage ...more

The Rockwell Automation (Allen-Bradley) part number 122.93.02 is a high-power phase control thyristor in disc (press-pack) package format, rated 800 Amps and 1600 VAC. The component body is marked NS40SH16, L00, E4L, consistent with a large-diameter ceramic-encased disc thyristor of the type used in high-current ...more

Serial No. T-6697, Tonnage.50 Tons, Table Size.12"L x 30"W, Stroke - Infeed Adjustable.0 - 24", Throat (Reach).22", Daylight (Ram Up).26", Ram Speeds:, - Feed.118 IPM, - Press.51 IPM, - Return.97 IPM, Hydraulic Pump Motor.10 HP, Ram Diameter.5.5", Cylinder Bore.8", Electrics.220/440V/3Ph/60Hz, Weight - ...more

This listing is for a Fanuc A06B-6089-H106 Servo Amplifier Unit, revision B, manufactured by Fanuc Ltd in Yamanashi, Japan. The nameplate identifies this as a single-axis servo drive with a rated main input of 200 to 230V AC at 27A at 200V, 3-phase, 50/60 Hz. Maximum output voltage is 230V AC. Rated output current for ...more

Surplus/Never Used/Never Installed Four (4) MAN-Doosan 6L27/38 1,980 kW (each), Six (6) Wartsila 9L20, 1600 kW (each) and Six (6) Wartsila 6L20 Marine -Diesel Generator Sets, Complete HFO-Diesel 22.7 MW Power Plant with all their respective auxiliaries and BOP, 450v. 60 Hz. These units can burn Diesel, Gas Oil, Marine ...more

The Fanuc A06B-0269-B200#0100 is an Alpha iS series AC servo motor manufactured by Fanuc Ltd. in Yamanashi, Japan. This unit is identified as model Alpha iS 30/4000HV, a high voltage variant within the Fanuc Alpha iS servo motor family used extensively in CNC machine tool feed axes and high performance industrial ...more

Make: R&M, Capacity: 30 Tons Main, 10 Tons Aux, Span: 29' 6", Available Lift: 39', Class: C, Crane Headroom: 63", Wheelbase: 12' 6", Overall End Truck Length: 16', Year: 2008, S/N: 14042, Control: Radio/Pendant, Electrical: 460/3/60, Status: Taken down and stored indoors, Bridge, - Speed: 100/21 FPM ...more

Ruesch Precision Slitter Head, Model: 76, Width: 13", Arbor Diameter: 2.875", -Swing Away Entry Unit, Adjustable Side Guides, Passline Roll, Non Driven Pinch Rolls, -Independent Arbor Parallel Adjustment, -Steel Stripper Ring Assembly, -Main Motor Capacity: 12 HP @ 1750 RPM, -Reducer Ratio: 16:1, -Reducer Coupling has ...more

;- Foley Work Ready - ATTACHMENTS SHOWN SUBJECT TO CHANGE AND MAY NOT BE INCLUDED IN PRICE, 42" FORKS, 5000LB CAPACITY, LED WORK LIGHTS, LP GAS / GASOLINE, NON-MARKING TIRES, Online Owner's Manual, P5000 2021.

Key bench top high shear granulator/mixer Model KG5, 316 stainless steel bowl and base, with (1) 1 liter bowl, approximately 5.5" diameter x 3.5" deep, non jacketed bowl. Main impeller motor, 1 HP, D/C, 1750 RPM, 120 V, A/C = 11.5 FLA, Chopper motor, 1/5 HP, D/C, 10,000 RPM 120V A/C = 1.7 FLA, serial number JI-3405. ...more

Spiromatic Spiral Duct Former, Model: 600, Duct Diameter Range: 100mm - 1250mm (3.94" - 49.21"), Gauge range: 0.4mm - 1.0mm TO DW144 (0.0157" - 0.0394"), Max strip speed: 65 FPM, Double-end Uncoiler, Saw blade duct Cutoff, Roller duct receiving table, Main Motor: 7.5 kw (10 hp), 875 rpm, 220 V, 3 ph, NEBB Trefasemotor ...more

The Acopian 51515T9A is a triple output linear power supply manufactured in Easton, PA, USA. This unit belongs to Acopian's Gold Box series and is housed in the GT9 case size, featuring a perforated metal enclosure for passive cooling. The nameplate confirms a fuse rating of 2 A at 250V and identifies the unit as ...more

This listing is for a Fanuc A03B-0819-C160#D I/O Module, model designation AOR08G I/O Model A, manufactured in Charlottesville, Virginia, USA. The nameplate identifies this as an 8-point relay output module rated at 30VDC and 250VAC. The unit carries UL listing (file E157515, guide 8M89), cUL listing, and CE marking. ...more

This listing is for a Fanuc A06B-6089-H105 Servo Amplifier Unit, revision D, manufactured by Fanuc Ltd in Yamanashi, Japan. The nameplate identifies this as a single-axis servo drive with a rated main input of 200 to 230V AC at 17A at 200V, 3-phase, 50/60 Hz. Maximum output voltage is 230V AC. Rated output current for ...more

MODEL.: ATS-45S, SWING.: 20", MAX TURN LENGTH.: 15", BAR CAPACITY.: 1-13/16", MAIN SPINDLE NOSE.: A2-6, SPINDLE SPEED.: 4,000 RPM, MAIN SPINDLE MOTOR.: 15, SUB SPINDLE SPEED.: 4,000 RPM, SUB SPINDLE MOTOR.: 5 HP, NUMBER OF TURRET STATIONS.: 10, CONTROL.: FANUC OT, OPTIONS:, LIVE TOOLING, SUB SPINDLE, Machine ...more

NEW SURPLUS Electric Spectra Series Switchboard 1600 Amp 480 Volt 3 Phase 3 Wire with 1600 Amp Main-Tie-Main Electrically Operated Insulated Case Circuit Breakers Cat. No. SSF16G216 and the following Molded Case Feeder Circuit Breakers:, •1600 Amp Cat. No. SSF16G216, •2 each 1200 Amp Cat. No. SKLL36AT1200 ...more

CV-600A Rockwell Hardness Tester, USED CV Instruments Model CV-600A Rockwell Hardness Tester for B & C Rockwell Hardness Scales. S/N: 12334 : Vertical Space : 6.7"Throat Depth: 6"Dimensions: 6" x 19 x 28Weight: 85kgTest Loads: 10kgf preload/ 60, 100, 150kgf main loadRockwell Scales: A, B, C, F. Click for Full Spec ...more

Pre-Owned Messer Model MPC 2012LP Plasma System, MPC2012LP-12-5747 New 2012, Maximum Cutting Width 12’, Maximum Cutting Length 40’, Messer Global Control, 24” Flat Touchscreen, True Shape Nesting, Direct Import of Cad Files, 8 Position Joystick, Left Hand Mount, Hypertherm HPR400XD HyDefinition ...more

Year: 2000, Make: Amada, Model: Togu III, Max Grinding:.039, Max Diameter Tool Size: 6.30", Main Axis Motor: 2HP, Main Axis Rotation Speed: 3000 RPM, Main Axis Travel: 9.45", Weight: 1,058lbs, Dimensions: 2' x 2' x 5'H, 3 Jaw Chuck, Variable Speed, **Personal inspection of all equipment is highly ...more

260 FACE SPREAD45 MAIN PIN40 H-LINK PIN, 35" WIDE, Online Owner's Manual.

Includes:2 count of 50 Amp breaker, 1 count of 100 amp breaker, 1 count of 225 main amp breaker PLEASE REVIEW: We would ask that potential buyers please view the photographs carefully, and understand what you are buying. Please ask any questions you have PRIOR to your purchase. *Your purchase includes a 30 day ...more

3 225A main breakers. 30-Day Warranty & Functional Guarantee, Shop with confidence! We guarantee everything we sell to be fully functional. Your purchase is backed by our 30-day warranty—if it doesn’t work as described, we’ll make it right., Shipping & Freight Logistics, Freight Handling: ...more

This listing is for a Fanuc A06B-6120-H018 Servo PSM (Power Supply Module), model designation aiPS 18HV, revision C, manufactured by Fanuc Ltd in Yamanashi, Japan. The nameplate identifies the rated main input as 400 to 480V AC at 37A at 400V, 3-phase, 50/60 Hz. Rated DC output is 565 to 679V at 21kW. The unit carries ...more

Machining Capacity, Bar capacity 3.7/3.9, Chuck diameter 21.7, Max length between spindle faces 30.1, Max swing over diameter 26.8/19.7, Main Spindle, Max speed 3,000 rpm, Spindle nose 8 ASA, Spindle bore 4.2/4.4, Chuck diameter 15.7, Motor power 40.2-51 HP, Max torque 590-748 lb/ft, Sub-Spindle, Max speed 4,500-5,000 ...more

Used CNC lathe, featuring 5-axis capability, dual spindles at 6,000 RPM, and a FANUC CNC control. Includes Y-axis, live tooling, bar feeder, 12-position turrets, and collet chucks., Max. swing 9.1", Max. turning diameter 9.05", Max. turning length 4.7", Number of spindles 2, Spindle speed (main & sub)6,000 RPM ...more

-Model: 1.5 - 1766192, -Capacity: 60" x 0.015" to 0.075" (Mild Steel), -Number of Work Rolls: 17, 8 over 9, -Diameter of Work Rolls: 1.50", -Width of Rolls: 66", -Backup Rolls: 5 Flights Top and Bottom, 3 Middle Flights - Motorized Adjustment, 5 Bottom Flights - Fixed, -Entry and Exit Driven Pinch Rolls, -Pinch Roll ...more