Buy or Sell Your C18 Engines

ITEM NO : 92401 QTY : 1 ALLOY : S SQ.FT. : 518 MATERIAL (S) : 304SS MATERIAL (T) : 304SS MATERIAL (H) : CS TUBE DIAMETER IN" : 1.5 TUBE LENGTH FT'IN" : 24'0" TUBE HOLES : 55 TUBE WALL :.120" V/H : V SHELL DIAMETER FT'IN" : 1'6" O.A.L FT'IN" : 26'0" 304SS ...more

1" Ajax upset forging machine, 100-200 Tons upsetting 1980, S/N 5188-R Rated Bar Capacity: 1″ Upsetting Force (Approximately) 200 Tons Gripping Force (Approximately) 100 Tons Hold On 2 ½″ Die Height 9″ - Die Length 8″ - Die Thickness 5″ Gather 3-3/4″ Header Slide Stroke ...more

MODEL # E-90, SERIAL #: 52482, 9" STROKE, 18" SHUT HEIGHT, 4.5" POWERED RAM ADJUSTMENT, 46 SPM, 39" x 25" BED, 27.50" x 20" RAM, AIR CLUTCH & BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, HYDRAULIC OVERLOADS, YRAR: 1986, 65" LR x 79" FB x 148" TALL, 18,000 LBS ESTIMATED WEIGHT, GOOD CONDITION.

COLUMBIA COATINGS - KOOL KOAT KK10816: 10' W x 16' D x 8' H Double Door Gas-Fired Powder Coating Oven -- Wall thickness: 4".: -- Modular design with: Bolt construction that can be expanded lengthwise. -- Premium G90 16- & 18-gauge galvanized steel construction with: Additional 12-gauge on frame. -- ...more

Tonnage 800, Stroke 30 inches, Shut Height 79 inches, Adjustment 4 inches, Bed Size 120" LR x 60" FB, Ram Area 120" LR x 60" FB, SPM 7-18 SPM, Standard, Link Drive Mechanical Metal Stamping Press, Verson Press Model #LE4-800-120-60t, 800 ton Capacity, 30" Stroke, 79" Shut Height (on Bed), 62" Die Height to Rolling ...more

SERIAL. 5A-1413, MODEL. 5A, SPINDLE DIAMETER. 4", SPINDLE TRAVEL. 24", TAPER IN SPINDLE. #6 MT, FEEDS. (18).004" -.125", SPEEDS. (16), DISTANCE SPINDLE TO BASE. 24" MIN, 96" MAX, VERTICAL TRAVEL OF ARM ON COLUMN. 56", HORIZONTAL TRAVEL OF HEAD ON ARM. 128", MOTOR. 50 HP, OVERALL DIMENSIONS. 14'9" X 4'9" X ...more

Norden Model 602, automatic, hot air, plastic or laminate tube filler and sealer rated from 10 to 40 tubes per minute – depending on materials and application. Tube size range: 10mm to 50mm in Diameter; 50mm to 250mm in Height. Fill size range: 1ml to 300ml all with proper change parts. stainless steel product ...more

A&J Pfaudler Model AJSP183-6DCSS Stainless Steel 18 cubic foot double rotor fluidized paddle mixer. s jacketed sidewalls and hinged top access. Mixing chamber measures approximately 36 long x 34 wide x 22 deep. Driven by two 7.5 HP, 230/460V, 3-phase, 60 Hz SEW Eurodrive motors with 29:1 gear ratio, operating at ...more

Make: Haas, Model: DM-2, Year: 2024, Machine Location: Upon Request, Table Size: 34″ x 15″, X Axis Travel: 28″, Y Axis Travel: 16″, Z Axis Travel: 15.5″, Spindle Speed: 15,000 RPM, Spindle Taper: CAT 40, Spindle Motor: 15 HP, ATC: 18 +1, Max Tapping Speed: 5,000 RPM, Machine Weight: 5,500 ...more

Stainless Steel Conveyor. Belt width: 11 in. Maximum aperture/clearance above belt. Cleat height: 1-1/2 in. Distance between cleats: 18-1/2 in. Dayton Motor, 1/2 hp, 3450 rpm, 115/230 V, 80/40 amps, 60 Hz, 3 phase. Motor Drive. Infeed height: 27 in. Exit height: 67 in. Overall dimensions: 72 in. L x 26 in. W x 72 in. H.

SERIAL. BR150715, MODEL. SERIES 1, AREA OF TABLE. 9" X 42", SPINDLE SPEEDS (VARIABLE). 60 TO 4200 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 16", QUILL TRAVEL. 5", DEPTH OF THROAT. 6-3/4" TO 18-3/4", SPINDLE TAPER. R-8, CHROME WAYS. YES, POWER ...more

SERIAL. 90119, MODEL. 2, AREA OF TABLE. 9" X 42", SPINDLE SPEEDS. 80 TO 5440 RPM, SPINDLE FEEDS.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL. 30", CROSS TRAVEL. 12", VERTICAL TRAVEL OF KNEE. 16", QUILL TRAVEL. 5", DEPTH OF THROAT. 6-3/4" TO 18-3/4", SPINDLE TAPER. R-8, CHROME WAYS. YES, ONE SHOT LUBE. YES, MOTOR. 2 ...more

used ohlson (nvenia) model rofs-1012-ss automatic rotary preformed pouch machine with scale, platform and bucket elevator. new in 2020! capable of speeds up to 35 bags per minute (depending on bag size, product and application). bag size range: 4.33" - 9.84" (width) x 5.9" - 13.7/8" (length). includes air-%-cu 5 cu ft ...more

Rated Capacity.(tons). 110 TONS, Bed Area.(l-r x f-b). 39" x 30", Ram Area.(l-r x f-b). 28-1/4" x 21-1/8", Throat. 18-7/8", Stroke of Slide. 6", Strokes per Minute. 50, Shutheight. 22", Bolster Thickness. 3", Adjustment. 4", Width Between Uprights. 23", O.A. Dimensions.(lr x fb x high). 5'8" X 8' X ...more

” X 10’ Hydraulic Shear with CNC SC100T Pendant Control, Squaring Arm, Swing Away Back Gauge, Automatic Blade Gap Adjustment and Shadow Light, Working Length: 123”, Capacity Mild Steel: 3/8" (80.000 PSI), Min. Cutting Angle: 0.5°, Max. Cutting Angle: 3°, Number Of Hold Downs: 18, Working ...more

EXTREMA XF-38.3 Power Feeder w/Mounting Column;"EXTREMELY" Heavy duty 3-Roll Power Feeder with 4-3/4" & 2-1/4" rubber rollers. -- 1 HP Motor with forward/reversing switch. -- (8) Speeds of 7 - 13 - 18 - 22 - 26 - 36 - 43 - 55 & 108 FPM. -- Heavy duty cast aluminum construction of the feeder housing. -- Cast ...more

, used 18 Sq.Ft. Shell and Tube heat exchanger. (5) U tubes 3/4 OD x 113 x 14 BWG. Type BEU, 1987 MANNING & LEWIS., FT2. 18 ft, Tube PSIG. 508, Tube Deg. 482, Tube Mat. 304L SS, Type. SHELL AND TUBE, Horiz/Vert. H, Shell PSIG. 360, Shell Deg. 680, Stamped. NB 6621, Shell Mat. CS, Shell Pass. 1, Tube Pass. 2 ...more

FOREL PBN 6.32 Automated Bending Machine For Spacer BarsBending machine with a work plate inclined at 45 designed to bend spacer bars to any angle. The machine is suitable for processing steel and aluminum profiles. The spacer frames can be filled with desiccant after being bent.The machine is an automatic plug device ...more

Used 2015 DMG Lasertec 65 3D. Machine Tool Bids offers plenty of Vertical Machining Centers and other fabrication and CNC machines for great prices. Contact us if you have any questions about this DMG Lasertec 65 3D or any of our machines., MACHINE, Dimensions: 25.59" (NC Swivel Rotary Table), Maximum Workpiece ...more

Johnson Controls VA9208-GGC-3 On/Off & Floating Electric Spring-Return Actuator - Johnson Controls VA9208-GGC-3 VA9208 Series On/Off and Floating Electric Spring-Return ActuatorvvJohnson Controls VA9208-GGC-3 : Spring Return Electric Valve Actuator, 0(2) to 10 VDC 0(4) to 20 mA (with 500 ohm resistor), 24 VAC, 8 ...more

Take your sheet metal work to the next level with the GMC Hemming Forming Machine, a reliable and versatile solution for professional fabricators. Designed for precision and durability, this machine is built to handle your hemming needs with ease, efficiency, and consistency., ISO 9001 certified, 4HP Heavy Duty AC ...more

ROWE 24" X.032" X 10,000 LBS SERVO FEED LINE, SERVO FEEDER SERIAL #: R34309 NEW 2007 MODEL #: PM-EA-230C-073 24" WIDTH.032" x 24" CAPACITY MIN CAPACITY.018", PILOT RELEASE RIGHT TO LEFT FEED DIRECTION, PENDANT FOR JOGGING THREADING TABEL, STRAIGHTENER MDL# A3-24 S/N# P34309-3 7 ROLLS 24" WIDE 0.018 -.032" CAPACITY 200 ...more

Used Leistritz twin screw extruder, model MIC18PH/GL-35D, 18 mm screws, co-rotating screws, 35:1 l/d, 500 rpm screw speed, electrically heated, water cooled barrel, 2.2 kw, 230/400 volt, 2950 rpm motor with VFD controller, (6) barrel sections with (1) jacketed feed, (2) vented and plugged, (4) non vented barrel ...more

Used Micromeritics Galaxy 3060 Ultra-High Throughput Physisorption Analyzer used for surface area analysis. High-throughput, high-vacuum multiple port (6 x 3 port) physical adsorption analyzer with continuous Po reading for determining specific surface area and pore size distribution from 17 to 5000 Angstoms using ...more

ITEM NO : 101048 QTY : 1 ALLOY : S SQ.FT. : 878 MATERIAL (S) : 304SS MATERIAL (T) : 304SS MATERIAL (H) : CS PSI (S) : 75FV PSI (T) : 75 TEMP. DEG. F (S) : 450 TEMP. DEG. F (T) : 450 TUBE DIAMETER IN" :.75 TUBE HOLES : 562 TUBE WALL : 18 BWG PASSES (S) : 1 PASSES (T) : 12 V/H : H CODE : YES #3 STRIPPER CONDENSER; ...more

Make: Wysong, Model: A-144, Year: 1900, Machine Location: Ohio, Capacity: 18 ga, Cutting Length: 12′, Cycle Time: 12-second cycle @ 110 PSI, Back Gauge: 0–24″, modified with electric variable-speed operator, Hold-Downs: 15 total, spaced on 10″ centers, Bed / Throat Depth: 24″ max with ...more

Grob 4V-18 Vertical Band Saw 18" #6901 #1, Throat Depth: 18, Working Height: 12, Table Tilt: 45 Down Right, 10 Down Left, Infinitely Variable Speed: 40 5000 FPM, Motor HP: 3, Electrical: 230/460V(Wired 230)/3PH, Approx. Shipping Weight: 1,750 Lbs., Approx. Shipping Dimensions: 56 L x 56 W x 88 H, Blade Welder ...more

AMADA SPH-60 66 Ton Brake Punch 1983’ #7906, ImperialMetricTonnage 66 T 59.874 t Type HYD HYD Overall Length 32" 0.8 m Between Housings 22" 0.6 m Dimensions 50” x 70” x 98” H 50” x 70” x 98” H Weight 11,500 Lbs. 11,500 Lbs. AMADA SPH-60 66 Ton Brake Punch 1983’ ...more

ADELIO LATTUADA TL 13 AV Straight Line Vertical Glass Bevelling MachinePremiere Italian 13-Spindle electronic straight-line edging machine for the processing of flat edge with arris and with variable angle from 0 up to 45, polished by liquid cerium oxide. The polishing wheels intervention is automatic because it is ...more

CAPACITY:, Tonnage Capacity: 25 Tons, Maximum Sheet Thickness: 1/4", Maximum Punch Diameter: 3", Y-Axis Table Travel: 50", X-Axis Table Travel: 100", Maximum Work Piece Weight: 507 Lbs., Maximum Strokes Per Minute: 500, Maximum Linear Table Speed: 4300 IPM, Bosch Trumagraph CNC Control, 18 Station Linear Tool Changer ...more

one(1) used Weber Brothers Lab Pulverizers. Serial Number 5S1172. 5/8 hp motor, 120 volts, 9000 full load rpm, direct driven. 3 sets of hammers (18 hammers total). 5" diameter chamber. Gravity feed with small feed hopper. Removable front cover. discharge screen, is replacable. Mounted on a floor mount pedestal. ...more

MODEL. 21 X 120, TYPE. 500 MT 2000 33173, SWING. 21", SWING OVER CROSS SLIDE. 12-1/2", CENTERS. 120", LENGTH OF GAP. 14", SPINDLE SPEEDS. (18) 16 TO 1250 RPM, SPINDLE HOLE. 4-1/8", THREADS. 1/4 TO 60 TPI, METRIC THREADS.50 TO 120 MM, TAPER ATTACHMENT. YES, THREAD DIAL. YES, COOLANT. YES, CHUCK. 16" 4 JAW, MOTOR. 10 HP.

used- apai action packaging automation inc econopouch bagger with apai 10-head scale. speeds of 18 bpm, 10 bpm w/ zipper opener. size range : 5.9" to 11" wide (150mm to 280mm) x 5.9" to 12.6" (150mm to 320mm). 220v 20a 1 ph 7.0 cfm@ 80psi. smc swappable pneumatics, mitsubishi fx3u-64mt/es plc, omron/schneider delta ...more

, Build Envelope (X Y Z) 16" x 14" x 16", Dimensions (W x D x H) 51" x 36" x 77", Layer Thickness Range 0.005", 0.007", 0.010" & 0.013", Machine Weight 1350 lbs., Power Requirements 50/60 Hz, 120/208 VAC, 18 A, s:, GrabCAD Print, GrabCAD Print PRO Insight Software, Fused Deposition Modeling (FDM) Technology ...more

Roll-In 14 1/2″ Vertical Roll In Saw, Model F-14-12, Asset # 17503, Serial # 90091EF, Capacity under Guide 14 1/2″, Throat 8 3/4″, Wheels 14″ x 1 1/8″, Wire Tires – Replaceable, Table Size 18 1/2″ x 30″, Table Height 30″ From Floor, Blade Length 10′, Motor 1 ...more

Locking Forming Machine with German locks for round ducting - PL-18C, Discover the GMC Machine Tools Model #PL-18C Locking Forming Machine your ultimate solution for precise forming and German lock technology in round ducting fabrication. With cutting-edge s and superior craftsmanship, optimize your workflow with ...more

WORKING LENGTH OF PLATE. 180", WIDTH OF PLATE. 96", PLATE THICKNESS. 7", NUMBER OF T SLOTS. 8, T SLOT CENTERS. 12", T SLOT WIDTH AT TOP. 1-1/8", T SLOT DEPTH. 2-2/3", T SLOT WIDTH AT BOTTOM. 2-2/4", AXCESS HOLE IN TOP. 18, LEVLING SCREWS. YES.

Belimo GMX120-3 provides 360 in-lb (40 Nm) torque, operates on AC 100-240 V, and supports on/off and floating point control. It s a manual override via an external push button and a maximum rotation angle of 95, adjustable with a mechanical stop. Electrical connection is through an 18 GA appliance cable with a 1/2" ...more

SERIAL.: J-71955, AREA OF TABLE.: 9" X 42", SPINDLE SPEEDS.: 80-2720, SPINDLE FEEDS.:.0015,.003,.006 IPR, LONGITUDINAL TABLE TRAVEL.: 30", CROSS TRAVEL.: 12", VERTICAL KNEE TRAVEL.: 16", QUILL TRAVEL.: 5", RAM TRAVEL.: 12", DEPTH OF THROAT.: 6-3/4" TO 18-3/4", TAPER IN SPINDLE.: R8, HEAD TILTS,FRONT/BACK.: 45 DEGREE ...more

SERIAL. 21030143, MODEL. ETM949-CNC, YEAR NEW. 2021 MARCH, TABLE SIZE. 9" X 42", TABLE CAPACITY. 550 LBS, TRAVEL IN RAM. 14", TRAVEL IN KNEE. 16", LONGITUDINAL TABLE TRAVEL. 35", CROSS TABLE TRAVEL. 12", SPINDLE TAPER. R8, QUILL DIAMETER. 3-3/8", SPINDLE SPEEDS. 60 TO 4500 RPM, MAXIMUM DISTANCE SPINDLE TO TABLE. ...more

Brand/Model: Union TD-30 : Used Union TD-30 triplex production pump package with the following s: • 2.75" stroke • 30 HP • Steel fluid end • 2" plungers • 3" 300# NPT suction connection • 2" 300# NPT discharge connection • 3.44 gear ratio • Packaged with ...more

SERIAL. 42245, MODEL. 175 X12 CB, OVERALL LENGTH OF BED. (14) 168", DISTANCE BETWEEN HOUSINGS. (12'6) 150", STROKE. 10", OPEN HEIGHT. 17", CLOSED HEIGHT. 7", DEPTH OF THROAT. 8", TONNAGE CONTROL. YES, RAM SPEEDS (HIGH). 132 IPM, RAM SPEED (MEDIUM). 65 IPM, RAM SPEEDS LOW. 18", RAM SPEEDS RETURN. 127", FILLER ...more

Year: 1999, Make: Amada, Model: Pega 244, Tonnage: 22 Tons, Max Travels: 40" x 40", Maximum Sheet Size (w/o Repositioning): 40" x 40", Maximum Sheet Size (w/ Repositioning): 40" x 80", Turret Style: Thick, Turret Stations: TBD, Weight: 18,750lbs, Dimensions: 13' x 8' x 6.5'H ...more

NEPTUN / BAVELLONI LV TOP 1600 Vertical Glass Washing Machine 1600 mm (63")1600 VA is a vertical glass washer made with a solid supporting structure in stainless steel, both for the washing and the drying section. The doors in tempered glass allow an easy inspection of the working cycle, and increase the sound ...more