34 Results
.157" x 3.74" Malmedie #B8, 4 die progressive cold header, 55-110 PPM, 40 HP
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Malmedie
Model: B8
Cutoff Diameter 8mm Maximum Shank Length 80mm Maximum Cutoff Length 95mm Pieces Per Minute 55-110 Electrics 40 Hp AC Motor and Controls Weight 22,000 Lbs. O.A. Dimensions 14' x 8' x 6'H, PKO 1-4 in Use in the First, IFO Straight Across Transfer, Air Clutch, Pneumatic Feed Rolls.
JUST ADDED!
15/64" x 3-9/16" Nakashimada #TH4-6A, 4-Die Progressive Header, 2-3/4" shank length, 230 PPM, bushing cutoff, 2-plane straightener, 1988
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: TH4-6A
Year: 1988
Maximum Diameter Cutoff 6mm Min/Max Shank Length 10-70mm Min/Max Cutoff Length 12-90 Pieces per Minute 230 Electrics AC Motor and Controls Weight 11,000 Lbs., Bushing Cutoff, PKO, IFO Transfer, 2 Plane Straightener, *making full tubular aluminum rivets*.
1/4" Johns Manville Rod Header
National Machinery Exchange | Newark, NJ
Category: Progressive Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Johns Manville
5/16" x 2.9" National Formax #FX22M, 2 die, 2 blow, progressive header, 20 HP, 1994
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Formax
Model: FX22M
Year: 1994
Total Heading Load 30 metric tons Strokes per Min. - Single Speed 400 Strokes Per Minute - Variable Speed 135/400 Cutoff Diameter.350 (85.000 psi) Cutoff Length (min to max).315/2.913 Kickout Stroke - Die (min to max).236/2.165 Kickout Stroke - Punch (min to max).354/.709 Die Diameter 1.968 Punch Diameter 1.575 ...more
5/16" x 2.913" National Machinery Formax #FX22M, 2-die, 2-blow progressive header, 20 HP, 1996
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Formax
Model: FX22M
Year: 1996
Total Heading Load 30 metric tons Strokes per Min. - Single Speed 400 Strokes Per Minute - Variable Speed 135/400 Cutoff Diameter.350 (85.000 psi) Cutoff Length (min to max).315/2.913 Kickout Stroke - Die (min to max).236/2.165 Kickout Stroke - Punch (min to max).354/.709 Die Diameter 1.968 Punch Diameter 1.575 ...more
Get email updates for newly added Progressive Headers
Progressive Headers (also known as progressive die headers) are machines used to produce fasteners and other small, complex parts by progressively shaping metal in a series of steps. Commonly used in industries like automotive and electronics, these machines offer high precision and efficiency, allowing for high-volume production of parts like bolts, screws, and rivets. Progressive headers are ideal for creating intricate components quickly and consistently, improving productivity in mass manufacturing.
.314" x 3.14" Moroni #MB-765, transfer header, 5-die, 18.5 KW, 230 PPM
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Moroni
Model: MB-765
No. of Dies 5 Wire Diameter 8mm Bolt Length 60mm Blank Length 80mm Head Diameter 18mm Die Diameter 50/45mm Cutoff Die Diameter 40mm Punch Diameter 45mm Pieces Per Minute 230 Stroke Length of Punch Ejectors 20mm Motor 18.5 Kw Weight 7.000 Kg.
3/8" x 2.9" National Formax #FX33M, medium stroke, 3 die, progressive header, 300 PPM, 1990
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Formax
Model: FX33M
Year: 1990
Max. Cutoff Diameter.433" (11mm) Max. Shank Length 2.953" (75mm) PPM 300 Heading Tonnage 56, Updated Electrics, Scrap Conveyor, 2 plane straightener, Multi Checker Unit.
3/8" x 3.34" Sacma #SP-250, 4-Die Progressive Header, 2.55" die kickout length, 0.78" punch knockout length, 275 pieces/min., 40 HP, bushing cutoff, 1994
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Sacma
Model: SP-250
Year: 1994
Cutoff Diameter 10.5mm Cutoff Length 85mm Die Kickout Length 65mm Punch Knockout Length 20mm Pieces Per Minute 275 Main Motor 30 Kw Machine Weight 11,000 Kgs, Bushing cutoff, PKO (Top Driven in all 4 punches), IFO (on Transfer System), Brankamp Process Monitor model ECO 600, Exit Conveyor, 1 Plane wire straightener.
3/8" x 5" Waterbury-Farrel #2, 4 die progressive header, 100 blanks/minute, 20 HP
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Waterbury-Farrel
Model: 2
Maximum Shank Diameter 3/8" Maximum Diameter Cutoff 9/16" Die Kickout 3 1/2" Gate Knockout 1 1/8" Gate Stroke 6" Maximum Length of Feed 5" Die Center Distance 3 1/4" Blanks per Minute 100 Combined Heading Capacity 90 tons Main Motor HP and RPM 20-1800 Weight 28,740 Lbs. Floor Space (O.A. Dim.) 76"W x 124"L x 70 1/2" H.
.393" Nakashimada #PF-1080, 2 die 3 blow progressive header, 50-100 PPM, PKO, 30 HP, 1982
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: PF-1080
Year: 1982
Cutoff Diameter 10mm 2nd Die KO 80mm 1st Die KO 160mm 2nd Punch KO 35mm 3rd Punch KO 10mm 2nd Die Relief Stroke 8mm Pieces Per Minute 50-100 Electrics 30 HP AC Motor Weight 33,200 Lbs.
.472" x 3.937" Formax #FX35M, 5-die progressive header, 1997, electrical upgrade 07/2021
National Machinery Exchange | Newark, NJ
Category: Progressive Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Formax
Model: FX35M
Year: 1997
FORMAX M#FX35M 5 DIE PROGRESSIVE HEADER, 1997 VINTAGE, HEADING TONNAGE. 50, TOTAL HEADING LOAD (METRIC TONS). 70, STROKES PER MIN. - SINGLE SPEED. 300, STROKES PER MIN. - VARIABLE SPEED. 100/300, CUTOFF DIAMETER (85,000 PSI).472, CUTOFF LENGTH (MIN./MAX.).236/3.937, KICKOUT STROKE - DIE (MIN./MAX.).315/2.953, KICKOUT ...more
1/2" x 7" Waterbury-Farrel #3, 4 die progressive header, 80 blanks/minute, 30 HP
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Waterbury-Farrel
Model: 3
Maximum Shank Diameter 1/2" Maximum Diameter Cutoff 11/16" Die Kickout 5" Gate Knockout 1 1/2" Gate Stroke 8" Maximum Length of Feed 7" Die Center Distance 4" Blanks per Minute 80 Combined Heading Capacity 180 tons Main Motor HP and RPM 30-900 Weight 66,520 Lbs. Floor Space (O.A. Dim.) 109"W x 160"L x 90" H.
1/2" Asahi Okuma #AOT-12B, 2 die, 2 blow cold header, PKO, Impax 1000 monitor
FH Machinery Inc | Ivyland, PA
Category: Progressive Headers
Seller: FH Machinery Inc
Location: Ivyland, PA
Mfr: Asahi
Model: AOT-12B
Maximum Cutoff Diameter12mm (1/2") Maximum Cutoff Length120mm PKO Stroke24mm Maximum Production160 PPM Approx. Floor Size14"L x 6-1/2"W Approx. Weight35,000 lbs Heading Tonnage120 Ton (Metric) 132 Ton, PKO Impax 1000 Monitor Stripper Extra Tooling & Feed Rolls.
.629" x 3.93" Asahi Okuma #APF-1513-5, 5-die progressive heading machine, roller feed, 1988
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Okuma
Model: APF-1513-5
Year: 1988
Cutoff Diameter 16mm Cutoff Length 10-100mm KO Length 10-130mm PKO 20mm Die Size 90 x 180mm Punch Size 70 x 120mm Quill Diameter 60mm Pusher Diameter 25mm Cutter Diameter 30mm Max. Head Diameter 25mm Forging Tonnage 120 Speed 100 max. Weight 35 Ton, Roller Feed Universal Transfer Crane.
.629" x 4.84" National Formax Plus #FXP-43M, 3-die progreesive header, 240 PPM, 1999
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Model: FXP-43M
Year: 1999
Maximum Diameter Cutoff 16mm Maximum Cutoff Length 123 mm Die Kickout Length 90 mm Pieces per Minute 240 Forging Pressure 1200 kN Electrics 440 Weight 22,500 kgs. Floor Space (O.A. Dim.) 2.73 M x 5.33 M x 3.09 M, 3 Set up Jigs, 6 Punch Packs, 3 Die Packs, 2 IFO Cams, Oil Seperator, Air Handler, Electric Transformer ...more
.629" x 7.08" Asahi Okuma Sunac #AF-1414-3, 3 die progressive header, 150 ton, 125 SPM, 1991
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Asahi Okuma
Model: AF-1414-3
Year: 1991
Forging Stations 3 Cutoff Diameter 16mm Max. ( 65Kg/cm2) Cutoff Length 180-20mm Die Kickout Length 140-25mm Punch Kickout Length 30-10mm Die Case Die. x Length ( #1-#3) 100 x 200mm Punch OD x Length (#1-#3) 75 x 160mm Cutter OD x Length 60 x 100mm Pusher Die OD 30mm Cutter Holder Thickness 25mm Dimensions of F.D.C. ...more
.669" x 9.055" Sakamura #BP450SL, 4-die long stroke progressive header, 110 PPM, 1990
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Sakamura
Model: BP450SL
Year: 1990
Cutoff Diameter Mild Steel 17mm Cutoff Diameter Alloy Steel 16mm Die Kickout Length 200mm Cutoff Length 230mm Pieces per Minute 110 PKO Stroke 30mm Forging Pressure 160T Electrics 55 Kw AC Motor and Controls 220 Volts 50 Hz. Weight 41000 Kg Floor Space (O.A. Dim.) 6.4m x 3.1m x 2.2m, Bushing Cutoff, Punch Knockout ...more
3/4" x 9" National, 3-Die Progressive Header, 6" max. shank length, 50 pieces/min., 10 HP, 500 Volt, 50 Hz
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: National
Maximum Cutoff Diameter 3/4" alloy Min/Max Shank Length 1-1/2-6" Min/Max Cutoff Length 1-1/2- 9" Pieces Per Minute 50 Electrics 7.5 KW 500V 50 HZ AC Motor and Controls Weight 110,000#, Note:Used to be a Botlmaker No Longer has Pointer or Threader, #5 ajax houge wire drawer.
3/4" Johns Manville #5B, Open Die Double Stroke Magazine Feed Rod Header
National Machinery Exchange | Newark, NJ
Category: Progressive Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Johns Manville
Model: 5B
One Used 3/4" Manville Model 5B Open Die Double Stroke Magazine Feed Rod, Header, Serial No 4852, 3/4" Max. wire diameter, 18" Max. part length (Can be up to 32" with slight change), 3-1/2" Square Grip dies x 7" long., Approx. 25 PPM., Magazine feeder, Motorized chain escapement conveyor, Extended gather and pull-off ...more
.787" x 7.48" Chun Zu #CBP-165S, 5-die bolt former, 75 HP, 95 PPM, IFO transfer, 2008
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Chun Zu
Model: CBP-165S
Year: 2008
No. of Forging Station 5 Forging Load 220,000 Kfg. Cutoff Diameter 20mm Cutoff Length 190mm PKO Stroke 50mm (option) KO Stroke 165mm Punch Dia. x L 75 x 185L (mm) Cutoff Die (Dia. x Length) 75 x 100L (mm) Die Dia. x L 108 x 200L (mm) Die Pitch 129mm Pieces Per Minute 95 Output Max. Main Motor 75 Horse Power Machine ...more
0.23" x 3.5" Nakashimada #TH4-6A, 4-Die Progressive Header, 2.756" shank length, 230 pieces/min., 2-plane wire straightener, 1992
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nakashimada
Model: TH4-6A
Year: 1992
Maximum Diameter Cutoff 6mm Min/Max Shank Length 10-70mm Min/Max Cutoff Length 12-90 Pieces per Minute 230 Electrics AC Motor and Controls Weight 11,000 Lbs., Bushing Cutoff, PKO, IFO Transfer, 2 Plane Straightener, *making full tubular aluminum rivets*.
0.24" x 2.2" Asahi Okuma #RH-60, 2 Die 3 Blow Header, 200 PPM, PKO, 1988
Machinery Exchange International | Posen, IL
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Okuma
Model: RH-60
Year: 1988
Wire Diameter: M6, Max Cut Off Length: 55 mm, Min Cut Off Length: 6 mm, Max K.O. Length: 55 mm (1st Die and 2nd Die), 2nd PKO K.O. Length: 18 mm, 3rd PKO K.O. Length: 12 mm, Main Motor: 10 HP, PPM: 100 – 200 pcs/min, Heading Tonnage: 30 Metric Tons, Relieving K.O. Stroke: 2MM, Year: 1988, Voltage: 220V 60HZ 3PH ...more
JUST ADDED!
0.28" x 2.56" Sacma #SP-150, 4-Die High-Speed Progressive Cold Header, 1.77" die knockout, 350 pieces/min., single plane wire straightener, 1996
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Sacma
Model: SP-150
Year: 1996
Cutoff Diameter @ 85,000 PSI 7mm Die KO 45mm Cutoff Length 65mm Pieces Per Minute 350, Bushing Cutoff, PKO 1-4, IFO Transfer, Pneumatic feed Roll Clamping, Single plane wire straightener, Brankamp Process Monitor model ECO 600.
0.35" x 2.9" National Formax #FX-22M, 2 Die 2 Blow Header, 400 SPM
Machinery Exchange International | Posen, IL
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Formax
Model: FX-22M
SIZE: 8.9mm x 74mm, PPM: 400, MANUFACTURED: 1994, DIMENSIONS: 4.3m x 1.9m x 2.2m, INCLUDED:, 1) Conveyor, 2) Wire Straightener, 3) Operator Stand, 4) Oil Separator, 5) Transformer, 6) Complete Sound Enclosure.
0.51" x 3.94" Asahi Sunac #AT-1210, 2D2B Header, w/ conveyor, die block, 1994
Machinery Exchange International | Posen, IL
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Asahi
Model: AT-1210
Year: 1994
Max cutoff diameter, 13 mm or.512 in, Max kickout, 100 mm or 3.937 in, Year, 1994, S/N, 4-011, Comes with, Operator Stand, Conveyor, New die block, In good running condition.
0.55" x 3.9" Asahi Okuma #ORH-120, 2D3B Header, 100 PPM, overhaul 2007, orig 1990
Machinery Exchange International | Posen, IL
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Mfr: Okuma
Model: ORH-120
Overhauled 11/2007, 14mm cutoff dia, 100mm cutoff length, 1st die ko – 130mm, 2nd die ko 90mm, punch kickout length 17mm, relieving stroke 3mm, 100 ppm.
JUST ADDED!
0.71" x 2.76" Nedschroef #NH-518, 5-Die Progressive Header, 180 pieces/min., wire straightener, exit conveyor, IFO transfer, 2000
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nedschroef
Model: NH-518
Year: 2000
18mm max cutoff dia @ 600 N/mm2, 70mm max kickout length, 180 PPM, PKO all stations, Exit Conveyor, IFO transfer, Brankamp Process Monitor model ECO 600, wire straightener, Air cleaner, Linear Feed, Sound enclosure.
0.87" x 2.76", Jern Yao #JNP19B5S, Parts Former, 6.93" stroke, 185 ton, 50 HP, 160 PPM
Machinery Exchange International | Posen, IL
Category: Progressive Headers
Seller: Machinery Exchange International
Location: Posen, IL
Model: JNP19B5S
CUT-OFF DIA. MAX. (mm) 22, CUT-OFF LENGTH MAX. (mm) 11~70, KICK-OUT LENGTH MAX. (mm) 100 (50), P.K.O. LENGTH MAX. (mm) 20, CUT-OFF QUILL (DxL) (mm) 70×75, MAIN DIE HOLE (DxL) (mm) 90×140, DIES PITCH (mm) 111, PUNCH HOLE (DxL) (mm) 65×130, RAM STROKE (mm) 176, FORGING POWER (ton) 185, OPEN UPSET DIA. ...more
1" x 11" National #1000, long stroke 4-die progressive header, over arm heading ram, 4 full forming dies
National Machinery Exchange | Newark, NJ
Category: Progressive Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
Model: 1000
, Max. Cutoff diameter. 1.125". 28.6mm, Min. Cutoff length. 1.5". 38.1mm, Max. Cutoff length. 11.0". 279.4mm, Max. Kickout stroke (die). 9.0". 220.5mm, Kickout stroke punch. 2.25". 56mm, Across flats hex. 1.42". 61mm, Die diameters. 5.375". 136.5mm, Punche diameters. 4.375". 111.1mm, Total Heading Load. 400tons. ...more
1-1/8" Malmedie #QPB-20, 4-die progressive header, IFO, PKO, BCO
National Machinery Exchange | Newark, NJ
Category: Progressive Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Malmedie
Model: QPB-20
IFO, PKO, BCO, DIAMETER: 28mm (1 1/8"), MAX KO: 200mm (7.787"), MAX CUTOFF: 270mm (10.630"), 4 DIE.
1.18" x 9.45" Chun-Zu #CBP-206L, bolt former, 6 forging stations, 125 HP, 2010
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Chun-Zu
Model: CBP-206L
Year: 2010
No. of Forging Station 6 Forging Load 390,000 Kfg. Cutoff Diameter 30mm Cutoff Length 240mm PKO Stroke 60mm (option) KO Stroke 220mm Punch Dia. x L 90 x 215L (mm) Cutoff Die (Dia. x Length) 94 x 130L (mm) Die Dia. x L 125 x 240L (mm) Die Pitch 140mm Pieces Per Minute 70 Output Max. Main Motor 125 Horse Power Machine ...more
Lian Shyang #14B-LS6 long Stroke, PKO part former, 2005
Canadian BDX Inc | Black Diamond, AB
Category: Progressive Headers
Seller: Canadian BDX Inc
Location: Black Diamond, AB
Mfr: Lian Shyang
Model: 14B-LS6
Year: 2005
2005 Lian Shyang cold heading Part Forming machine, with Punch KO, Long Stroke, 92 PPM, 18,000 lbs,approx 7 feet wide, and 13 feet long with a platform payoff real, and wire straightener, 7 stations, Ffirst cutoff, from wire, up to 15mm dia of mild steel, (We used brass and copper for cups), Next 6 are forming ...more
Nedschroef #HBV-3, 4-die progressive header, trimming, sound enclosure, PKO, IFO, 1989
Hariton Machinery Co Inc | Bridgeport, CT
Category: Progressive Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Nedschroef
Model: HBV-3
Year: 1989
Max. Head Diameter 25 Min / Max Cutoff Length 25-130 Max Die KO 100 Max Wire Diamater 600 N/mm2 12.5 Punch Kickout Length 30 Die Diameter x Length 70 x 120 Punch Diameter x Length 55 x 105 Max. Speeds in Parts/Min. 210 depending on material and product type Forging Load 1100 Kn Motor Output 52 kW Electrics 460 Volts ...more
Peltzer & Ehers #GB-20-4, 4 Die, 5 Station Boltmaster, 135mm die KO stroke, 22mm PKO stroke, 2000Kn, 110 PPM
National Machinery Exchange | Newark, NJ
Category: Progressive Headers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Peltzer & Ehers
Model: GB-20-4
MAX WIRE STOCK DIA. 20mm, MAX CUT OFF LENGTH. 155mm, DIE KNOCK-OUT STROKE MAX. 135mm, PUNCH KNOCK OUT STROKE MAX. 22mm, MACHINE CAPACITY. 2000 KN, DIAMETER OF DIES. 95mm, STROKES PER MINUTE. 110 MAX, PARTS PER MINUTE. DEPENDS ON COMPONENT TO BE FORMED, MAIN DRIVE (MOTOR CAPACITY). 53 KW 1750 RPM, WEIGHT. 66,000 LBS. ...more
