Buy or Sell Your 600 Ton Presses

Spindle Diameter: 6", Spindle Taper: No.50 ANSI, Vertical Headstock Travel, Y-Axis: 156", Column Travel, X-Axis: 396", Spindle Travel, Z-Axis: 48.03", Spindle Drive Motor: 50 HP, Spindle Speed Range, Inf.Variable: 12-2500 RPM, Traverse Rate, X-Axis: 400 IPM, Traverse Rate, Y-Axis: 450 IPM, Feed Rates, X, Y & Z ...more

, Capacity 60 Ton, Bed Size: 21" x 32", Ram Face: 12" x 17", Stroke: 4", Adjustment: 3", Shut Height: 14-1/4", 100 SPM, Center of Ram Back to Frame: 10-1/2", Die Shank Hole, Single Speed, Palm Buttons, Air Clutch/Brake, Air Counterbalances, 7-1/2 HP Motor, Wired 3 Phase, 60 Cycle, 460 Volts, Overall Dimensions: 76" ...more

CAPACITY:400 TON STROKE:14" SHUT HEIGHT TO BED:24" (SDAU - OVER BOLSTER) BED AREA:60" X 42" (RL X FB) SPEED:25 - 45 SPM (VARIABLE) RAM ADJUSTMENT:14" (MOTORIZED) RAM AREA:60" RL X 42" FB (T-SLOTTED) BOLSTER SIZE:10" TH X 60" RL X 42" FB (T-SLOTTED) WINDOW SIZE:25" FB X 25" H (APPROX) DIST UPRIGHTS / FLOOR TO BED:61" / ...more

Capacity 1,500 Ton x 36' Distance Between Housings 22'-6" Open Height 24" Ram Speeds Rapid Advance 46 IPM Fast Press 25 IPM Full Tonnage Press 10 IPM Return Speed 19 IPM Fast Return 34 IPM Horsepower 60 H.P. WEIGHT 300,000 Lbs. s Disassembled By Cincinnati, Inc. Located In Philadelphia, PA..

CAPACITY 300 TONS @ 1948 PSI, MAX. STROKE 6", MAX. DAYLIGHT TO BED 17.25" (11.25 max shut height), BED & RAM AREA 98" X 52" (RL X FB), DISTANCE BETWEEN POSTS 74" X 34" (RL X FB), USABLE BED & RAM AREA 74" X 52" (RL X FB), SPEED --, POST SIZE 5.5" DIA., CYLINDER SIZE 14" dia. bore - (TWO CYLINDERS), HYDRAULIC ...more

SERIAL. NS150-1-189, MODEL. 150, CAPACITY. 150 TON, STROKE. 4", CYLINDER DIAMETER. 7", ELECTRIC FOOT PEDAL. DUAL, DIES SET WITH MACHINE. 1/8" & 3/16", DIE SET WITH MACHINE. 1/4",5/16", DIE SET WITH AMCINE. (3) @ 3/8", DIE SET WITH MACHINE. 5/8" & 3/4", MOTOR. 7-1/2 HORSEPOWER.

CAPACITY60 TON STROKE6" MAX SHUT HEIGHT TO BEDAPPROX. 16" SDAU BED AREA37" RL X 32" FB SPEED40 - 80 SPM SLIDE ADJUSTMENT3" MANUAL SLIDE AREA22" RL X 15" FB (T-SLOTTED) BOLSTER PLATE2.25" H X 37" RL X 32" FB DISTANCE BETWEEN UPRIGHTS24.25" DISTANCE FLOOR TO BED32" CLUTCHEATON AIRFLEX CLUTCH & BRAKE ELECTRICS7.5 HP ...more

, MANUFACTURER. JOHNSON (SOUTH BEND), MODEL. 60, TYPE. Flywheel, CAPACITY. 60 TON, BED SIZE. 22" x 32" F/B, RAM AREA. 20" X 14.25" F/B, SPEED. 20 TO 90 SPM, STROKE. 4", SLIDE ADJUSTMENT. 3.5", SHUT HEIGHT TO BED. 17", SHUT HEIGHT TO 3" BOLSTER. 14", NEW CLUTCH 2018 WINTRESS DIPRO 1500 DIE PROTECTION WINTRESS AUTOSET ...more

SERIAL. 722930, MODEL. 110BH08, YEAR. 1972, CAPACITY. 110 TONS, LENGTH OF RAM & BED. 98", DISTANCE BETWEEN SIDE HOUSINGS. 80", STROKE. 6", ADJUSTMENT, MECHANICAL. 3/4" TO 8", OPEN HEIGHT. 13-3/4" MAXIMUM, BED WIDTH. 7-3/4", APPROACH SPEED. 3.9 IPS, WORKING SPEED.62 IPS, RETURN SPEED. 2.4 IPS, MOTOR. 12 HP.

CQ Ironworker The CQ Ironworkers are the result of collaboration between COMEQ with over 45 years experience and over 15.000 Ironworkers sold in the US, and Durmlazar one of the leading manufacturers of fabrication equipment in the world., Al CQ-Ironworker series models are Dual Cylinder independent Punch and Shear ...more

SERIAL. ATP80-7133-ASS-03, MODEL. ATP-5555, YEAR NEW. 2019, IMPACT CAPACITY. 120 TON, HOLDING TONNAGE. 80 TON, AREA OF BED. 55" X 55", AREA BETWEEN PINS. 46" X 46", STROKE.5 TO 3", OPEN HEIGHT. 15.75", LOWER BED PLATE. 5", TOP PLATE. 3.75", RAM PLATE. 3.75", AIR TANKS. 2 @ 28 GALLONS, RAMS STOPS. 4, ** 3 PRESSES IN ...more

Capacity: 150 TonStroke: 4"Shut Height: 20"Slide Adjustment: 4"Bed Area: 48" x 40"Slide Area: 45"x 30"Windows: 20" WideSpeed: 100 - 200 SPM, Omnilink II 5000 Control (New 2014)CWP SMXSE24 24" x.093" Press Mounted Servo FeedAccra Wire Controls F-300AF 7,000 lbs Pallet UncoilerAir Clutch and BrakeAir ...more

110 Ton Bliss OBI Press, Stk# 12438J S/N H{-45356 Year: 1967, CAPACITY: 110 TON, STROKE: 6", SHUT HEIGHT: 21", RAM ADJUSTMENT: 4", SPEED:, BED AREA: 42" L-R X 27" F-B, RAM AREA: 28" L-R X 22" F-B, OPENING THROUGH BACK: 24-1/2", O.A.D.: 88" L-R X 102" F-B X 149" T, APPROX WEIGHT: 25,000 LBS, BACK GEARED DESIGN, AIR ...more

Make: LVD, Model: 150-JS-10, Year: 1995, Machine Location: Illinois, Tonnage: 150 Tons, Overall Length: 10ft, Distance Between Housings: 8’6″, Stroke: 7.9″, Open Height: 15.75″, Throat Depth: 15.75″, Rapid Approach: 368 IPM, Press Speed: 2 – 59 IPM, Return Speed: 326 IPM, Approx ...more

Reis 100 Ton Hydraulic Spotting Press, Model TUS-160S-100, Asset # 17431, Serial # 03.189.00, Daylight Between Columns 63.78″, Daylight 90.55″, Clamping Surface 86.6″ x 61″, T Slot Dimensions, 25.59″ x.866″, Ram Force 100 Tons, Retraction Force 45 Tons, Swivel Platen Capacity 6 ...more

Year: 1996, Make: Amada, Model: HFB-1003, Tonnage: 110 Tons, Overall Length: 122.4", Between Housing: 106.2", Stroke: 7.8", Open Height: 18.5", Weight: 28,660lbs, Dimensions: 168" x 96" x 115"H, Operateur Control, 5 Axis Backgauge, 2 Finger assemblies, Foot Pedal, Misc Punch Holders ...more

ONE USED “BLISS" MECHANICAL C FRAME POWER PUNCH PRESS, HIGH SPEED, MODEL CH60, SERIAL # H71688, YEAR OF MANUF. 1998, CAPACITY 60 TONS, STROKE 2", SPEED 250 – 500 STROKES PER MINUTE, SHUT HEIGHT, BED TO SLIDE (STROKE UP, ADJ. DOWN) 15" ON BED, ADJUSTMENT OF SLIDE 3", SLIDE AREA 17" ...more

MOSSINI 630 TON TYPE: PDM/2B/LD630 SERIAL NUMBER: 0928/16 YEAR: 2016 KINEMATICS: LINK DRIVE RATED CAPACITY AT 13 mm: 630 Tons NUMBER of connecting rod: 2 SLIDE STROKE: mm 400 SLIDE ADJUSTMENT: mm 500 CONTINUOUS SPEED (variable): spm 24 - 53 SHUT HEIGHT, from top of bolster, SDAU: mm 1200 SLIDE DIMENSIONS (L-R x F-B): ...more

THIS DAKE 6-650 H FRAME SHOP PRESS IS A 150 TON AIR-OVER-HYDRAULIC PRESS DESIGNED FOR FABRICATING AND PRESSING APPLICATIONS. IT OPERATES WITH AN AIR PRESSURE REQUIREMENT OF 90-125 PSI. THE PRESS HAS OVERALL BASE DIMENSIONS OF 66 INCHES BY 42 INCHES AND A HEIGHT OF 95 INCHES, WITH A TOTAL WEIGHT OF 3,000 LBS. KEY ...more

CAPACITY.: 1000 TON, BED LENGTH.: 20', DISTANCE BETWEEN HOUSINGS.: 16'6", STANDARD STROKE.: 12", OPEN HEIGHT.: 22", CLOSED HEIGHT.: 10", RAPID ADVANCE.: 85 IPM, FAST PRESS.: 47 IPM, FULL TONNAGE PRESS.: 20 IPM, RETURN SPEED.: 35 IPM, FAST RETURN.: 65 IPM, HORSEPOWER.: 60 HP, Machine Type.Brakes, Hydraulic ...more

Dake 100 Ton H-Frame Press, Force 100, Inventory # 6476, Model: Force 100, Capacity: 100 Tons, Operating Pressure: 15 – 280 Bars, Ram Diameter: 100mm, Ram Travel: 19″, Bore: 180mm, Ram Rapid Advance Speed: 52 IPM, Ram Pressing Speed: 3 IPM, Hydraulic Pump: 3 Centrifugal Pumps, Controls: Panel Mounted ...more

SERIAL. 90114, MODEL. HDE120-12, YEAR NEW. 2006, CAPACITY. 120 TON, BED LENGTH. 144", DISTANCE BETWEEN HOUSINGS. 124", THROAT DEPTH. 9.8", STROKE. 4.7", OPEN HEIGHT. 12.8", CLOSED HEIGHT. 8.1", PASSLINE HEIGHT. 34.4", FAST APPROACH SPEED. 165 IPM, FAST RETURN SPEED. 142 IPM, PRESS SPEED. 17 IPM, TONNAGE LIMIT CONTROL. ...more

MODEL: SEP-120, SERIAL #: SEP120-145, 120 TON PUNCH, 1-1/2" HOLE THROUGH 1" MAXIMUM MATERIAL, 5" MAXIMUM HOLE THROUGH 1/4" MATERIAL, 2" STROKE, 21.5" THROAT DEPTH, 12-1/4" OPEN HEIGHT, 10-1/4" CLOSED HEIGHT WITHOUT DIE BLOCK, 20" FB x 10" LR PLATEN TABLE, 16 SPM @ 1", SOME TOOLING, 10 HP MOTOR, 48" x 60" x 72" OVERALL ...more

CAPACITY. 60 TON, LENGTH OF STROKE. 1.25", SHUT HEIGHT. 9.38" - 11.12", BOLSTER. 36" X 23", ADJUSTMENT. 1.75", RAM PLATE. 36" X 16", S.P.M. 1 - 1000, EST. WEIGHT. 25,000#, O.A. DIMENSIONS. 105" X 54" X 128", MOTOR. 30 HP, 90 VOLTS, 230/460 VOLT 3 PHASE, 78 / 39 AMPS, 1755 RPM (MIN 170, MAX 1680), LUBE SYSTEM, FLOOR ...more

CAPACITY60 TON STROKE4" MAX SHUT HEIGHT TO BED14.25" sdau BED AREA32" X 21" (rl x FB) SPEED100 SPM slide adjustment3" MANUAL slide area17" RL X 12" FB. includes new slide block for reconditioned price. BOLSTER PLATE3" H X 32" RL X 21" FB DIST BETWEEN UPRIGHTS / FLOOR TO BED14.75" / 35.25" CLUTCHBLISS AIR CLUTCH / ...more

Tonnage 200, Stroke 6 inches, Shut Height 28 inches, Adjustment 9 inches, Bed Size 72" LR x 42" FB, Ram Area 72" LR x 42" FB, SPM 50-100, Standard, Niagara Mechanical Metal Stamping Press, Press Model SC2-200-72-42, 200 ton Metric Capacity Used Press, 220 ton US Capacity Press, 6" Stroke, 28" Shut Height, 9" Motorized ...more

Contech Converting Technologies, Inc. 3662 Web Press Paper Film Equipment., This is an automatic die cutting press so you can cut shapes out of paperboard, non-wovens,vinyl's, laminates, poly films and others materials., The Contech has a 4 roll unwind station so you can have 4 layers to cut through. Create a ...more

Model: MD200S8000 B-Screw, Us Tonnage: 202, Shot Size Oz Of Ps: 14.12, Screw Diameter: 52mm, Platen Size In: 33.07 x 33.07, Tiebar Spacing Hxv In: 22.44 x 22.44, Max Mold Height In: 25.91, Min Mold Height In: 7.87, Opening Stroke In: 18.50, Open Daylight In: 44.09, Ejector Stroke In: 5.91, Control: Niigata S8000 ...more

Tonnage Capacity: 400 TonPull Up Capacity: 30 TonStroke: 19.7"Daylight: 50"Max. Total Die Weight: 4.8 TonMax. Upper Die Weight: 1.5 TonApproach Speed: 425 IPMPressing Speed - Under 320 Tons: 23.6 IPMPressing Speed - Over 321 Tons: 9 IPMReturn Speed (Fast / Slow): 330 IPM / 141 IPMBolster Area (L-R x F-B): 66.9" x ...more

Year: 1997, Make: Amada, Model: RG-100, Tonnage: 110 Tons, Overall Length: 122", Between Housing: 100.5", Stroke: 3.937", Open Height: 14.58", Throat Depth: 15.75", Weight: 14,100lbs, Dimensions: 11' x 6.5' x 9'H, NC9-EXii CNC Control, Remote Handwheel, 4 Finger Assemblies, Full ...more

CAPACITY: 400 - 1500 Ton, USEABLE LENGTH OF ROLLS: 3700 mm, MATERIAL THICKNESS RANGE: 360 - 180 mm, DIAMETER OF TOP ROLL: 1180 & 800 mm, MINIMUM BENDABLE DIAMETER: 1180-800 / 1320-900 mm, DIAMETER OF BOTTOM ROLLS: 1200 mm, 3 ROLL DESIGN, POWER: 612 Kw.

CAPACITY400 TONS STROKE12″ max die height23″ OVER 6.75″ h BOLSTER BED AREA84″ RL X 54″ FB SPEED24 – 42 SPM RAM ADJUSTMENT10″ (MOTORIZED) RAM AREA83″ RL X 54″ FB (REBUILT) BOLSTER PLATE6.75″ H X 84″ RL X 54″ FB DIST UPRIGHTS / FLOOR TO BED84″ ...more

Rating 60 tons Stroke 12.25 inches Cylinder (Ram) 4 inches Standard Motor 5 HP 3~ 208 V or 230 V ~ 1,725 RPM ~ 14 A Optional Motors 5 HP 3~ 460 V ~ 1,725 RPM 7 A / 5 HP 1~ 230 V ~ 1,725 RPM 23 A Hydraulic Pump 3-1/2 GPM - 1 Stage Valve Pressure 2,750 PSI Reservoir 7 Gallons Machine Dimensions (Width x Depth x Height) ...more

150 Ton X 12’ Press Brake with Automec CNC Backgauge., Tonnage: 150 Ton, Overall Length: 12’, Distance Between Housings: 124”, Stroke: 4.7”, Open Height: 12.8”, Closed Height: 8.1”, Throat Clearance: 9.8”, Approach Speed: 165” / Min, Form Speed: 18” / Min, Return ...more

Working Pressure 200 tons Length of Working Table 157.4 inches Distance Between Housings 124 inches Throat Depth 12.5 inches Stroke Adjustment of Ram 2.75 inches Ram Travel 7.0 inches Open Height 17.5 inches Rapid Ram Travel Speed (per second) 2.4 inches Rapid Ram Retreat Speed (per second) 2.0 inches Backgauge Travel ...more

Maximum Cutoff Diameter12mm (1/2") Maximum Cutoff Length120mm PKO Stroke24mm Maximum Production160 PPM Approx. Floor Size14"L x 6-1/2"W Approx. Weight35,000 lbs Heading Tonnage120 Ton (Metric) 132 Ton, PKO Impax 1000 Monitor Stripper Extra Tooling & Feed Rolls.

Straight Side Press • Used 500 Ton Press for Sale Manufacturer: Niagara Model: Niagara SC2-500-72-54 Press Condition: As-Is Under Power Location: Columbia, TN Warehouse Year: Year Unknown Machine #: 8029 CAPACITY 500 TONS STROKE 20″ MAX SHUT HEIGHT TO BED 38″ SDAU BED AREA 72″ X 54″ (RL X ...more

Maximum Swing Over Bedways: 125.98", Distance Between Centers: 629.92", Spindle Speeds: 0-80 RPM, Torque: 1,336 kgf.m, Tailstock Quill Diameter: 19.68", Tailstock Quill Stroke: 17.71", Maximum Work Piece Weight: 150 Tons, Main Motor: 150 HP, Fanuc 21i CNC Control, 110.23" Face Plate, 3-Way Bed Design, s:, Machine was ...more

Tonnage 100 tons, Stroke 3.00 inches, Shut Height 15.25 inches, SPM 300, Vari Speed (Yes/No) yes, Bed W 31 inches, Bed L 48 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Minster, Dimensions 144T x 107W x 63D, Weight 34000 pounds, Precision Straight Side Press ...more

(1) Used Cline Shuttle Wagon Rail Car Mover; 1,300 Ton Capacity; S/N: 5A1012, Manufacturer.Cline by T & J Industries Inc., Thrust Capacity., 1,300 Tons (on level plane), Hours.1,682, Engine.Cat 3208, Output., RPM.3500, Speed., Fuel consumption., Running Wheels., Material., Tires.12-22.5 Tubeless; Max. 55 mph ...more

ONE PREOWNED 10 NATIONAL HEAVY DUTY UPSET FORGING MACHINE, MODEL NO. 10, S/N 23120, DOUBLE TOGGLE, (subject to buyer verification), Upsetting Force. 3000 tons, Grip Force. 1500 Tons, Rated Bar Diameter. 10, Stroke. 30, Strokes Per Minute. 25, Stock Gather. 23, Hold. 12, Grip Opening. 13.5, Motor 300 HP, Floor Space ...more

CAPACITY400 TONS STROKE6″ SHUT HEIGHT TO BED26″ SDAU SPEED0 – 120 SPM (VARIABLE) RAM ADJUSTMENT6″ (MOTORIZED) BED AREA72″ RL X 42″ FB SLIDE AREA74″ RL X 42″ FB (T-SLOTTED BOTH DIRECTIONS) WINDOW SIZE26″ FB X 20″ H BOLSTER PLATE SIZE6″ X 72″ RL X ...more

Rated Capacity.(tons). 60, Stroke. 2", Adjustment. 3", Shutheight. 16-1/4", Throat. 10-5/8", Bed Area.(l-r x f-b). 32-1/4" x 21", Ram Area.(l-r x f-b). 17" x 12-1/4", Bolster.(l-r x f-b x thick). 32" x 21" x 4", Width Between Uprights. 15", O.A. Dimensions.(lr x fb x high). 5' x 6'6" x 9' 10", Air Clutch ...more

Stock # 102168, Condition Used, Tonnage 300 tons Stroke 12 inches Shut Height 25.25 inches SPM 18 Vari Speed (Yes/No) no Bed W 102 inches Bed L 48 inches Model: #300-48-102 Capacity: 300 Ton Stroke Of Slide: 12" Power Slide Adjustment: 6" Shut Height, SDAU: 24-1/4" Area Of Ram T Slotted Ram: 102" X 48" Windows: 26" ...more

-Model: MCP-60-2-36, -Serial Number: 3654-8-80, -Capacity: 60 Ton, -37" L-R between Posts, -22" F-B between Posts, -Post Diameter: 3", -16" Ram to Bed with Stroke Up, -2" Stroke (to be confirmed), -43.25" Floor to Top of Die Rails, -37.5" Floor to Top of Bed, -15 Hp Motor, 1150 Rpm, 575 Volt, 3 Ph, 60 Hz., -Wichita ...more

160 Ton Dake Model EM-160, 47" Btw Uprights, 15.75" Ram Travel, New 160 Ton Dake EM-160 Shop Press, Motor & Hand Operated, Model Number: EM-160, Capacity: 160 Tons, Filter Type: Pollution Filter, Motor: 7.5 HP 225V/3ph/60 HZ, Width Between Uprights: 61", Ram To Table: 0 - 35", Ram Travel: 15.75", Pressing Speed: ...more

31" CLEARANCE BETWEEN THE SIDES. 28.5" CLEARANCE BETWEEN THE GUIDES. 20" X 17" NOMINAL BED AREA. 16" SINGLE-ACTING DIAMETER RAM WITH APPROX 10" OF STROKE AND RATED AT 5000 PSI (300 TONS AT 3000 PSI)*. MAX DAYLIGHT OF APPROX 15.75". SIDES ARE 5" THICK WITH A 3.5" SLOT. TWO 3.25" BORE DOUBLE-ACTING SIDE CYLINDERS WITH ...more

MANUFACTURER. COLE-TUVE MODEL. CF-110, SERIAL NUMBER. CF/SB-1-22003, AGE. 2003 TONNAGE. 110 TONS, STROKE (ADJ.).25" TO 11.8", MAX. SHUT HEIGHT. 7.88", DAYLIGHT (MAX OPENING). 19.6", THROAT DEPTH. 10.2", TABLE. 23.5" X 43.5", RAM. 16.5" X 26.8", VOLTAGE. 440 VOLTS, MOTOR. 10 HP, APPROXIMATE WEIGHT. 11,000 LBS ...more