Buy or Sell Your 600 Ton Presses
AI-ranked results for 600ton - closest matches first
300 Ton, PTC #MPL-2-300-96X48, straight side double crank press, 12" stroke, 30" Shut Height, 6" ram adj., 20-60 SPM, Omni Link 806 Touch Pad, air clutch & brake, 1996
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Model: MPL-2-300-96X48
Year: 1996
ORDER 300, PTC 300 TON MPL-2-300-96X48 MODEL MP2-300-96X48 NEW 1996 TONNAGE 300 LENGTH OF STROKE 12" SHUT HEIGHT OVER BOLSTER 30" RAM ADJUSTMENT 6" SPM 20-60 FLOOR TO TOP OF BOLSTER 36" RAM AREA 96"LR X 48"FB BOLSTER AREA 96"LR X 48"FB X 6"T FLOOR STANDING APPROX WEIGHT 110,000 LBS, EQ WITH: AIR CLUTCH AND BRAKE AIR ...more
500 Ton, MAQ #WE67-500X6100, Hydraulic Press Brake, 20' overall, 187.9" between housing, 19.7" throat, 12.6" stroke, 27.6" open, 50 HP, Delem DA-53T Control
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Model: WE67-500X6100
500 Ton X 20’ Hydraulic Press Brake with Delem DA-53T Controller, Servo Motor for 2 - Axis, Linear Guideway + Ballscrew for Backgauge, DSP Front Laser Safety, LED Work Lamp, Lyntech at Rear Side, Fingers on Backgauge, Foot Pedal, Delivery, Installation, Training and 2-Year Warranty., Nominal Pressure: 500 Tons ...more
1650 Ton, 470 oz., Engel #Duo-23050/1650, 73.4" x 56.3" tie bar spacing, 128" open daylight, 2005
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: DUO-23050/1650
Year: 2005
, 2005 1650 Ton Engel DUO 23050/1650 US:, Shot size: 470 Oz, Tie bar spacing: 73.4" x 56.3" Wide platen., Platen size: 95.3" x 85.4", Max. Open daylight: 128", Hour meter reads: 9,886, Machine is under power and in good running conditions., Imperial Metric Tonnage 1,650 T 1,496.857 t Shot Size 470 oz 13,324.3 g Year ...more
6" x 6" x 1/2" Comeq #CQ-110, Ironworker, Dual Cylinder, 5-Station, 120 Ton, 2.4" Stroke, 24" Throat depth, 21.75" x 24" Table, 49" Work height, 11 kW, New
Comeq Inc | White Marsh, MD
Category: Ironworkers
Seller: Comeq Inc
Location: White Marsh, MD
Mfr: Comeq
Model: CQ 110
*In-Stock* CQ Ironworker The CQ 110 is a 120 Ton, Dual cylinder Ironworker capable of operating where even where high production volumes are required. 5 stations for an ergonomic and efficient production, and two cylinders that can be operated by independent foot pedals. It is capable of punching, flat shearing, angle ...more
60 Ton, Bliss #C-60, OBI press, 4" stroke, 14-1/4" Shut Height, 11" throat, 3" adjustment, air brake
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bliss
Model: C-60
SERIAL. HP52260/68877, MODEL. C60, CAPACITY. 60 TON, NEW. 19, STROKE. 4", ADJUSTMENT. 3", SHUT HEIGHT. 14-1/4", BED DIMENSIONS. 32" X 21", RAM SIZE. 17" X 12", THROAT DEPTH. 11", OPENING THROUGH BACK. 15", SPEED. 90 SPM, AIR BRAKE. YES, DUAL PALM BUTTON. YES, AUTO LUBE SYSTEM. YES, MOTOR. 5 HP.
JUST ADDED!
750 Ton, Danly #H-750-72-60, hydraulic press, 60" stroke, 72" daylight, 72" x60" bed,
Presses for Industry | Detroit, MI
Category: Hydraulic Presses
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Danly
Model: H-750-72-60
PRESS SERIAL NO., 69283301, PRESS DESIGNATION, H-750-72-60, CAPACITY 750 TONS AT, 2340 PSI, NET STRIPPING 190 TONS AT, 2340 PSI, STROKE, 60 IN, APPROACH, 860 IPM, PRESSING, 5-25 IPM, RETURN SPEED, 825 IPM, DAYLIGHT BED TO SLIDE, 72 IN, AREA OF SLIDE, 72INX60IN, AREA OF BED, 72INX60IN, STEAM TREE & MINION VACUUMS ...more
300 Ton, Komatsu #E2G-300U, Straight Side Mechanical Press, 98.4" x 49.2" bed & ram, 32.3" shut height, 10.2" adjustment, 14.2" stroke, 20-40 SPM, 1990
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Komatsu
Model: E2G-300U
Year: 1990
Tonnage 300, Stroke 14.2 inches, Shut Height 32.3 inches, Adjustment 10.2 inches, Bed Size 98.4 LR x 49.2 FB, Ram Area 98.4 LR x 49.2 FB, SPM 20-40 VSPM, 300-ton Komatsu Model E2G-300U, Straight Side Mechanical Stamping Press, Year 1990 Standard, 300-ton US Capacity, Rated @ 1/2" Off Bottom Dead Center, 14.2" Stroke ...more
100 Ton, Minster Piece Maker II #P2-100-42, 2" stroke, 25" Shut Height, 4" adj., 42" x32" bed, 80 SPM variable, 1974
Presses for Industry | Detroit, MI
Category: High Speed and Automatic Presses
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Minster
Model: P2-100-42
Year: 1974
Preliminary, Minster High Speed Piece Maker II Press, Model P2-100-42, Year 1974, 100 Ton Capacity, 2" Stroke, 4" Slide Adjustment, 25" Shut Height (S.D.A.U. to BED), 42" LR x 32" FB Bed Area, 42" LR x 18.50" FB Slide Area, 44" Opening between Gibs, 0-80 SPM Vari, Press Control Console, Rockford Systems SSC-1500 Part ...more
120 Ton, Corsteel #4P.52X60, 4-post hydraulic press, 10" stroke, 20" daylight, 60" x52"bed, 300 gallon resevoir, rebuilt 2022
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Model: 4P.52X60
ORDER 120, 10" STROKE, 20" DAYLIGHT, 60" X 52" RAM, 60" X 52" BED, 3" POST DIAMETER, 40" X 36" DISTANCE BETWEEN POST, 2150 MAX PSI, 300 US GALLON RESEVOIR, PALM BUTTONS, 2003, REBUILT 2022 BY BARRIE WELDING.
60 Ton, Bruderer #BSTA60IIUSL, high speed stamping press, 0625" to 2" stroke, 2.5" ram adjustment, 1996
Perfection Global | Elk Grove Village, IL
Category: High Speed and Automatic Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Bruderer
Model: BSTA60IIUSL
Year: 1996
Tonnage Capacity (U.S. Short Ton): 60 TonAdjustable Stroke: 0.625" - 2" (7 Positions)Stroke Speed: 150 - 1120 SPMBolster Plate Surface Area (R-L x F-B): 42.5" x 25.6"Base Plate Opening (R-L x F-B): 41.7" x 7.9"Ram Surface Area (R-L x F-B): 38.6" x 16.5"Ram Adjustment: 2.5"Shut Height (w/ 0.625" Stroke Length): ...more
60 Ton, Savage #60HTP, 4-post hyd.blanking trim press,light curtains,PLC, 1992, #A2756
Sterling Machinery Exchange | South El Monte, CA
Category: Hydraulic Presses
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Savage
Model: 60HTP
Year: 1992
Tonnage 60 Ton Horsepower 30 H.P. Bed & Ram Size (L - R, F - B) 50" x 36" Stroke 6" Day Light 19" Pressing Speeds: Approach Speed 147 @ 25 GPM Pressing Speed 41 IPM @ 7 GPM Return Speed 289 IPM @ 25 GPM Type 4 Post WEIGHT 13,000 Lbs. Dimensions of Press (L x W x H) 79" x 58" x 138" Dimensions of Control 65" x 16" ...more
150 Ton, Enerpac #IPE-150, H-frame hydraulic shop press with 10000 psi power unit, 13" stroke
Lenmark Industries | Langley, BC
Category: H Frame Hydraulic Press Machines
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Enerpac
Model: IPE-150
SKU: 138325, Model: IPE 150, Condition: Used, Tons: 150 ton, Electrical :, Stroke: 13", Additional :, Pristine condition, no leaks and ready to work, Vertical daylight: 12" to 48" adjustable in 10" increments, Area of bed: 48" x 23.25", Power unit: Enerpac PEM8418D with 575/600 VAC 3 Ph ...more
100 Ton, Sanki #SDP1310-100TD, hydraulic die spotting press, 51" x39" platen, 38.4" stroke, 41.2" DL, front & rear light safety curtains, one shot way lube
Alternative Machine Tool Inc | Dousman, WI
Category: Die Tryout and Spotting Presses
Seller: Alternative Machine Tool Inc
Location: Dousman, WI
Model: SDP1310-100TD
Platen Size: 51.0” x 39.0” Pressing Capacity: 100 Ton Maximum Mold Weight: 12,000 lbs Upper Mold Half Maximum Weight: 6,000 lbs Stroke w/ Bolsters Installed: 38.4” Daylight w/ Bolsters Installed: 41.2” Hyd. Motor Horsepower: 10 Hp Mold Top Half Inversion: +/- 180° Voltage: 480/3/60 Floor ...more
100 Ton, Standard #AB100-10, press brake, 10' overall, 101" between housing, 6" throat, 6" stroke, 13" open, 7" Shut Height, 2004
Smith Machinery Co | Ames, IA
Category: CNC Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Standard
Model: AB100-10
Year: 2004
Tonnage 100 tons Hyd/Mech hydraulic Punching 66 BH (Distance Between Housings) 8' 5" Bed/Ram Length 10 feet Weight 19000 pounds Throat Depth 6 inches Ram Stroke (Fully Adjustable) 6 inches Open Height 13 inches Closed Height 7 inches Overall Dimensions 11" W x 5' Deep x 9 1/2' Tall (Approx.), NO DIE RAIL ...more
500 Ton, Blow #LC2-500-60-48, straight side double crank, 10" stroke, 10" adj., 20-60 SPM, 68" x48"bed, air clutch & brake, 2000
Machinery Marketing International | Chicago, IL
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Blow
Model: LC2-500-60-48
Year: 2000
Tonnage: 500, Bed Area: 68 L-R x 48 F-B, Ram Area: 68 L-R x 48 F-B, Stroke: 10", Adjustment: 10", Speed: 20-60 SPM, Length (LR): 12ft8in, Depth (FB): 8ft4in, Height: 19ft6in, Weight: 142,000lb.
150 Ton, Minster #S2-4-36, 15" stroke, 36" Shut Height, 10" slide adjustment
Reid Machinery Inc | Lansing, MI
Seller: Reid Machinery Inc
Location: Lansing, MI
Mfr: Minster
Model: S2-4-36
150 Ton Minster S2-48-36 Asset: L043, Serial Number: S2 160 1701, Capacity: 150 Ton, Stroke: 15" 381mm, Slid Adjust: 10" 254mm, Shut Height 36” 914.4mm, Die Area: F-B 48" x 36" 1,219.2mm x 914.4mm, Slide Area: 48" x 36" 1,219.2mm x 914.4mm, Floor Space L-R & F-B: 8' x 6' 2.438m x 1.828m, Approximate ...more
100 Ton, Minster #P2-100-48, straight side double crank, 3" stroke, 17.5" Shut Height, 4" slide adjustment, 100-200 SPM, 15 HP
Revelation Machinery | Chicago, IL
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Minster
Model: P2-100-48
Year: 1900
Make: Minister, Model: P2-100-48, Year: 1900, Machine Location: Upon Request, Capacity: 100 U.S. Tons (910 kN), Stroke: 3.00 in (76 mm), Slide Adjustment : 4.00 in (100 mm), Shut Height: SDAU, on Bed • 17.50 in. (445 mm), Slide Are : 48.00 x 18.50 in.(1219 mm x 470 mm), Bed Area : 48.00 x 31.00 in.(1219 mm x 787 ...more
500 Ton, Bolling, hydraulic up-acting press, 20" x 17", 10" stroke, 17" daylight, slab-side
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Bolling
CLEARANCE L TO R BETWEEN THE SIDES IS APPROX 31" (28.5" BETWEEN THE GIB GUIDES). 16" DIAMETER RAM WITH APPROX 10" OF STROKE AND RATED AT 5000 PSI (300 TONS AT 3000 PSI). MAX DAYLIGHT OF APPROX 17". SLAB-SIDES ARE 4.75" THICK WITH A 3.5" SLOT. TWO T.J. 3.25" BORE DOUBLE-ACTING SIDE CYLINDERS WITH APPROX 10" STROKE. ...more
JUST ADDED!
100 Ton, Accurpress #710010, Hydraulic Press Brake, 10' overall, 1032" between housing, 16" stroke, 8" Shut Height, 10" throat, 10 HP, ETS200 Control, 1999
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Accurpress
Model: 710010
Year: 1999
100 Ton X 10’ CNC Hydraulic Press Brake with ETS 200 Pedestal Mounted Controller for Dual Palm Button or Foot Pedal Operation, Full Length Die Rail and Flush Floor Mount Design., Capacity: 100 Tons X 10’, Distance Between Housings: 8’ 6”, Ram Stroke: 16”, Closed Height: 8”, Throat ...more
150 Ton, Steton #P150C, Hydraulic Cold Press, 118" x 51" aluminum platen, 17" daylight opening, (8) 3.35" cylinders, 2 HP pump, 575 V., 3PH
Ex-Factory | Charlotte, NC
Category: Hydraulic Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Steton
Model: P 150/C
STETON - P150C: (2) Platen Cold Press (was built as a Hot Press, but heating does not work!) -- Approx.: 118" x 51" (3,500 x 1,300 mm) Overall platen size; side loading on: 118" Side; pressure from bottom: 2 HP Hydraulic pump. -- Max. daylight opening: 450 mm (17") Less thickness of middle platen. - Total pressure: ...more
500 Ton, Komatsu #E2P-500, straight side metal stamping press, 11.8" stroke, 41.7" Shut Height, 1988
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Komatsu
Model: E2P-500
Year: 1988
Tonnage 500, Stroke 11.81 inches, Shut Height 41.73 inches, Adjustment 9.84 inches, Bed Size 118" LR x 51.18" FB, Ram Area 118" LR x 47.24" FB, SPM 20-40 VSPM, Used 500-ton Komatsu Press For Sale, Komatsu Straight Side Press Model E2P-500-2 WS, Serial Number - 10016, 500-ton Metric Capacity, 550-ton US Capacity ...more
140 Ton, Wysong #MTH140-144, Hydraulic Press Brake, 144" overall, 126" between housing, 8" throat, 10" stroke, 17" open, 7" Shut Height, Automec CNC150, 1-shot lube, pedestal, 2000
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Wysong
Model: MTH140-144
Year: 2000
140 Ton X 12’ Hydraulic Press Brake with Automec CNC150 Control, Pedestal Palm Button Station / Electric Foot Switch, Variable Tonnage, 1 Shot Lube System, Filler Block & Oil Cooler, Capacity: 140 Tons, Overall Bending Length: 144”, Distance Between Housings: 10’ 6”, Throat: 8” ...more
100 Ton, Bud's MT #HHP-100, 11.2"stroke, 5.36 HP, 0.4 IPS, 10.57 gallon oil tank capacity, new
Bud's Machine Tools | Murray, UT
Category: Horizontal Presses
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Buds Mt
Model: HHP-100
Overview, Type:Horizontal PressManufacturer:BUD'S MTModel:HHP 100Condition:Build To OrderStock #:1835Status:For Sale, Max. Pressure 100 Ton (at 200 bars), Motor Power 5.36 HP, Max. Stroke 11.2", Working speed 0.4 IPS, Oil tank capacity 10.57 Gallons, Bending Capacity (flat) 7.87"x.94", Bending ...more
150 Ton, Minster Hevi-Stamper #E2-150-42-30, straight side double crank, 8" stroke, 31.5" Shut Height, 6" adj., 60 SPM, 42" x30"bed, Wintress Smart Pac 2 die protection, Allen Bradley PanelView 600, 1982
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Minster
Model: E2-150-42-30
Year: 1982
SERIAL.: 25233, MODEL.: E2-150-42-30, TONAGE.: 150, STROKE.: 8", SHUT HEIGHT.: 31.50", ADJUSTMENT.: 6", STROKES PER MINUTE.: 0 - 60 VARIABLE SPEED, BED SIZE.: 42" L-R X 30" F-B, RAM SIZE.: 42" L-R X 30" F-B, BOLSTER THICKNESS.: 6", BRONZE REPLACEABLE GIBS.: YES, 4-POINT GIBBING.: YES, MINSTER CONTROLS, WINTRISS SMART ...more
1200 Ton, 201 oz., Nissei #FVX1100III-600L, horizontal injection molding machine, Tact IV Control, 2021
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Nissei
Model: FVX1100III-600L
Year: 2021
, 2021 1200 Ton Nissei FVX1100-600L Hybrid Injection molding machine:, Shot size: 201 Oz, Tie bar spacing: 55.1" x 55.1", Platen Size: 78.0" x 78.0"", Max. Open daylight: 94.9", Tact IV control., Hours: 4,000, Machine is in excellent running conditions. Like new., Dual hydraulic core pull and dual air blow circuit. ...more
Hydraulic jack, Enerpac #RR150, 150 ton, 13.1102 stroke, 8.0708 outside dimension, #70190
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Model: RR150
SERIAL. 0311BR, MODEL. RR150, CAPACITY. 150 TON, STROKE. 13.1102, CYLINDER EFFECTIVE AREA PUSH. 30,71 IN SQ, CYLINDER EFFECTIVE AREA PULL. 14.80 IN SQ, COLLAPSED HEIGHT. 22.20, EXTENDED HEIGHT. 35.31", OUTSIDE DIAMETER. 8.0708.
Danieli Wean United Hot Dip Galvanizing And Coil Coating Line
National Machinery Exchange | Newark, NJ
Category: Galvanizing and Galvalume Lines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Danieli
Entry Material:, Cold Rolled Steel, Full Hard: 0.4mm to 3.0mm, MATERIAL PRODUCED, Thickness, Width and Speed:, Galvanized Coils- 3000mm2, Thickness: 0.3mm to 3mm, Strip Width: 600mm to 1500mm, Speed: 150m/Min, Pre-Painted Coils from Cold Rolled Steel Coil: 2295mm2, Thickness: 0.3mm to 1.5mm, Strip Width: 600mm to ...more
60 Ton, Minster #6, OBI press, 7" stroke, 18" Shut Height, 32" x 21" bed area, 3" ram adj., 100 SPM VS, 1966, #13471J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Minster
Model: -6
Year: 1966
MINSTER 60 TON OBI PRESS, STOCK# 13471J, MODEL# 6, S/N# 6-16736, YEAR 1966, CAPACITY: 60 TON, STROKE: 7", SHUT HEIGHT TO BED: 18" SDAU, BED AREA: 32" RL X 21" FB, RAM ADJUSTMENT: 3" SPEED: 100 SPM VS, RAM AREA: 21" RL X 12" FB, BOLSTER 32" LR X 21" FB X 3"T, T-SLOTED, DIST BETWEEN UPRIGHTS 15", FLOOR TO BED 32", PRESS ...more
500 Ton, Bolling, up-acting slab-side press, 10" stroke, 17" daylight, 20" x17", #2358
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Bolling
CLEARANCE L TO R BETWEEN THE SIDES IS APPROX 31" (28.5" BETWEEN THE GIB GUIDES). 16" DIAMETER RAM WITH APPROX 10" OF STROKE AND RATED AT 5000 PSI (300 TONS AT 3000 PSI). MAX DAYLIGHT OF APPROX 17". SLAB-SIDES ARE 4.75" THICK WITH A 3.5" SLOT. TWO T.J. 3.25" BORE DOUBLE-ACTING SIDE CYLINDERS WITH APPROX 10" STROKE. ...more
200 Ton, Minster #E2-200-72-42, 8" stroke, 31" Shut Height, 6" adjustment, 30-60 VSPM, reconditioned, 1981
S & G Press & Machinery Sales | Shelby Township, MI
Category: High Speed and Automatic Presses
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: E2-200-72-42
Year: 1981
Tonnage 200, Stroke 8 inches, Shut Height 31 inches, Adjustment 6 inches, Bed Size 72" LR x 42" FB, Ram Area 72" LR x 42" FB, SPM 30-60 VSPM, Used 200-ton Minster Straight Side Mechanical Press, Model E2-200-72-42 Hevi-Stamper, Serial Number / 23400, 200-ton Capacity, 8" Stroke, 31" Shut Height on Bed, 6" Adjustment ...more
60 Ton, Accurpress #7606, 8" stroke, 52" between housing, 6' overall, 1990
Machine Tool Technologies | Milwaukee, WI
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: -7606
Year: 1990
Weight: ~6,000 lbs Dimensions: 84″Lx40″Wx70″H Capacity: 60 Ton x 72″ Distance Between Housing: 52″ Ram Stroke: 8″ Open Height: 14″ Closed Height: 6″ Throat Depth: 8″ Speeds: 130 IPM (Fast)/251 IPM (Slow) Motor HP: 10 Electrical: 230V/3PH, Capacity: 60 T x 72″ ...more
Conair #TLA, tube loader, self contained vacuum loader, with control, includes wand
Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Conair
Model: TLA
Model: TLA, Max Injection Mold Machine Size: 800 tons, Max Extruder Size Inches: 2, Recommended Throughput Lb Hr: 700, Max Conveying Distance Feet: 20, Loader Diameter Inches: 4.5, Material Vacuum Line Size Inches: 1.5 OD, Loader Max Temperature Rating F: 180, Voltage: 115V/1PH/60HZ, 1 FLA.
800 Ton, Williams hydraulic press, 44" stroke, 6.5" bolster, 200 HP
Reid Machinery Inc | Lansing, MI
Category: Hydraulic Presses
Seller: Reid Machinery Inc
Location: Lansing, MI
Mfr: Williams
800 Tons Williams & White Hydraulic Press Asset: L026, Capacity: 800 Ton, Serial Number: C-1818, Capacity: (Metric Tons) 800 Tons, Stroke: 44" - 1,117.6 mm, Closing Speed: 510 IPM, Fast Pressing Speed (480 Tons): 10-37 IPM, Pressure 1815, 480 Ton, Slow Pressing Speed (825 Tons): 10-24 IPM, Pressure 3120, 825 Ton ...more
6" x 6" x 1/2" Geka #Hyd-100, heavy duty ironworker, 100 ton, hydraulic dual operation, foot Control
Sterling Machinery Exchange | South El Monte, CA
Category: Ironworkers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Geka
Model: HYD-100
Punching Power 100 Ton Punching Capacity Ø 1-3/16″ X 1″ Punch Throat Depth: 12" Flat Plate Shear Cutting Capacity: 24″ X 5/8″ Angle Cutting Capacity: 6″ X 6″ X 1/2″ Round Bar Shear Capacity: 2" Square Bar Shear Capacity Capacity: 2" WEIGHT 7,000 Lbs. Dimensions ( L x W x H ) 84x72x84" s Flat Shear ...more
300 Ton, Niagara #SE2-300-84-48UH, straight side double crank press, 8" stroke, 32" Shut Height, 11" adjustment, air clutch, 1992
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Niagara
Model: SE2-300-84-48UH
Year: 1992
Tonnage 300, Stroke 8 inches, Shut Height 32 inches, Adjustment 11 inches, Bed Size 84" LR x 48" FB, Ram Area 84" LR x 48" FB, SPM 35-70 VSPM, Standard, Used 300-ton Niagara Straight Side Mechanical Press, Model SE2-300-84-48 UH, 300-ton Metric Capacity, 330-ton U.S. Capacity, 8" Stroke, 32" Shut Height On Bed, 25" ...more
60 Ton, Wysong #MTH60-72, hydraulic press brake, 6' overall, 61-3/4" between housing, 6" stroke, 1996, #68382
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wysong
Model: MTH60-72
Year: 1996
SERIAL. MT1-117, MODEL. MTH60-72, YEAR. 1996, CAPACITY. 60 TON, OVERALL LENGTH OF BED & RAM. 72", DISTANCE BETWEEN HOUSING. 61-3/4", STROKE. 0 - 6", OPEN HEIGHT. 15", CLOSED HEIGHT. 9", DEPTH OF THROAT. 6", RAM SPEED APPROACH. 300 IPM, RAM SPEED FORMING. 20 IPM, RAM SPEED RETURN. 200 IPM, ADJ STROKE STOP LIMITS. ...more
110 Ton, Bliss #C-110, OBI press, 4" stroke, 18" Shut Height, 4" adjustment, 50-100 SPM, 42" x27" bed, 1977
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Bliss
Model: C-110
Year: 1977
SERIAL.: H-68579, MODEL.: C-110, TONNAGE.: 110 TON, STROKE.: 4", SHUT-HEIGHT.: 18", ADJUSTMENT.: 4", STROKES PER MINUTE.: 50-100 VARIABLE SPEED, BED SIZE.: 42" L-R X 27" F-B, RAM SIZE.: 28" L-R X 23" F-B, BOLSTER THICKNESS.: 4", PAML BUTTON.: YES, T SLOTTED RAM.: YES, T SLOTTED BOLSTER.: YES, Machine Type.Presses ...more
500 Ton, Bolling, up-acting, slab-side press, 10" stroke, 16.5" daylight, 20.5" x17", #2365
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Bolling
CLEARANCE L TO R BETWEEN THE SIDES IS APPROX 31" (28.5" BETWEEN THE GIB GUIDES). 16" DIAMETER RAM WITH APPROX 10" OF STROKE AND RATED AT 5000 PSI (300 TONS AT 3000 PSI). MAX DAYLIGHT OF APPROX 16.5". SLAB-SIDES ARE 5" THICK WITH TWO SLOTS (3.5" AND 1.5"). TWO 3.25" BORE DOUBLE-ACTING SIDE CYLINDERS WITH APPROX 10" ...more
JUST ADDED!
1500 Ton, Bliss #29, knuckle joint press, 15" stroke, 52" Shut Height, 1/2" adj., 53" x50" bed, 18 SPM, 1967
G-2000 | Toledo, OH
Category: Knuckle Joint Press Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Bliss
Model: 29
Year: 1967
SERIAL#.: C-147-00-01, MODEL.: 1500 Ton Knuckle Joint Press, TONNAGE.: 1500, STROKE.: 15", SHUT HEIGHT ON BED.: 52", ADJUSTMENT.: 1/2", BED AREA L-R, F-B.: 53" x 50", RIM AREA L-R, F-B.: 44" x 40", SPM.: 18, RAM.: T SLOT, BOLSTER.: DRILLED AND TAPPED, Machine Type.Presses, Knuckle Joint Manufacturer.BLISS Model.#29 ...more
110 Ton, Ermaksan #Power-Bend-Falcon-2600-100, 8' 6" OA, 86" between housing, 10.8" stroke, 16" throat, 1-Axis motorized Back Gauge
FMI Trading LLC | Vinton, TX
Category: Hydraulic Press Brakes
Seller: FMI Trading LLC
Location: Vinton, TX
Mfr: Ermaksan
Model: POWER-BEND-FALCON-2600-100
Product Information, Press Brakes PRODUCT NEW - ON REQUEST: Type:Hydraulic Bed length:8'6" Between housings:7'2" Stroke:10.8" Back gauge:Motorized 1 Axis (x) Depth of Throat:16" Weight:6,000 kg Voltage / Phase:230 | 460| Dimensions:94.5" x 177.2" x 102.4" ::Control: Cyblec 12V Axis:3 (Y1, Y2, x: 800mm) ...more
60 Ton, Accurpress #7608, hydraulic press brake, 8' overall, 78" between housing, 8" stroke, 10" throat, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Accurpress
Model: -7608
SERIAL. 4793, MODEL. 7606, YEAR. 1998, CAPACITY. 60 TONS, OVERALL LENGTH OF BED & RAM. 96, DISTANCE BETWEEN HOUSINGS. 78", STROKE OF RAM. 8", OPEN HEIGHT. 14", CLOSED HEIGHT. 6", DEPTH OF THROAT. 10", RAM SPEED FAST APPROACH. 90 IPM, RAM SPEED SLOW BEND. 24 IPM, RAM SPEED FAST RETURN. 180 IPM, MACHINED FOR ANGLES. ...more
500 Ton, Bolling, up-acting slab-side press, 12" stroke, 17.25" & 33.5" daylight, 20" x17", #2364
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Bolling
CLEARANCE L TO R BETWEEN THE SIDES IS APPROX 31" (28.5" BETWEEN THE GIB GUIDES). 16" DIAMETER RAM WITH APPROX 12" OF STROKE AND RATED AT 5000 PSI (300 TONS AT 3000 PSI). SLAB SIDES ARE MILLED AND DRILLED FOR TWO DIFFERENT DAYLIGHT OPENINGS: APPROX 17.25" AND 33.5". SIDES ARE APPROX 4.75" THICK WITH 3.5" SLOTS. TWO ...more
JUST ADDED!
100 Ton, Power Team #PH1002, horizontal hydraulic wheel puller, 10 -1/4" stroke, 15"-48" spread, 1-1/8 HP, portable
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Wheel Press Machine
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Power Team
Model: PH1002
MODEL. PH1002, CAPACITY. 100 TON, STROKE. 10-1/4", MINIMUM SPREAD. 15", REACH MINIMUM SPREAD. 42", MAXIMUM SPREAD. 48", REACH MAXIMUM SPREAD. 34", WORKPIECE THICKNESS. 12", WORKPIECE CENTER. 36" MAXIMUM, VERTICAL STROKE. 12" TO 36", HYDRAULIC PUMP. 2 STAGE, CYLINDER. SINGLE ACTION, WHEEL DIAMETER. 8", PORTABLE. YES ...more
400 Ton, Standard Industrial #AB400-12, manual hydraulic press brake, 12' bed length, 10'-5", Bet. frames, 20" open height, 10" stroke, 2026, new
Ex-Factory | Charlotte, NC
Category: Hydraulic Press Brakes
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Standard
Model: AB400-12
Year: 2026
STANDARD INDUSTRIAL AB400-12 Press Brake: -- Forming / Punching 400 / 260 Tons -- Bed/Ram Length 12 ft -- Between Frames 10'-5" -- Bed Height 38"; -- Open Height 20 in -- Stroke 10 in -- Closed Height 10 in -- Throat Depth 10 in -- Ram speeds APPROACH 110 ipm PRESS 17 ipm RETURN 106 ipm -- Horsepower 40 -- ...more
200 Ton, Pacific #K200-14, hydraulic press brake, 14' overall, 149" between housing, 12" stroke, 25 HP
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pacific
Model: K200-14
SERIAL. #6563, MODEL. K200-14, NEW 1976, TONNAGE CAPACITY. 200 TONS, OVERALL LENGTH OF BED & RAM. 14', DISTANCE BETWEEN HOUSINGS. 12'5", STROKE. 12", OPEN / CLOSED HEIGHT. 17" / 5", RAM SPEED - ADVANCE. 82 IPM, RAM SPEED - PRESSING. 36 IPM, RAM SPEED - RETURN. 78 IPM, FLANGED BED WIDTH. 17", FLOOR TO BED. ...more
60 Ton, Modern #1R50, down moving hydraulic press, 18" stroke, 40" x 40" bed, #50290
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Modern
Model: 0060
SERIAL. 2510, MODEL. 1R50, CAPACITY. 60 TON, STROKE OF RAM. 18", OPEN HEIGHT. 48", CLOSED HEIGHT. 30", BED. 40" X 40", BOLSTER. 40" X 40" X 4", DISTANCE BETWEEN POSTS. 40-1/2" LR X 23" FB, DIAMETER OF POSTS. 5-1/2", OPERATING PRESSURE. 2050 PSI, DIAMETER OF CYLINDER. 4-1/2", (2) PULL BACK CYLINDERS, DIAMETER. 2", DUAL ...more
140 Ton, Wysong, hydraulic press brake, 10' overall, 102" between housing, 8" stroke, Autobend Back Gauge
Mullin Machinery | Farmingdale, NJ
Category: Hydraulic Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wysong
Product, WYSONG 140 TON x 10′ HYDRAULIC PRESS BRAKESERIAL# MT11-113, BED LENGTH- 120″, DISTANCE BETWEEN HOUSINGS-102″, TONS- 140, STROKE- 8″, WEIGHT- 18,500 LBS, A HURCO AUTOBEND 7 3 AXIS CNC BACK GAUGE- 2 AXIS ON THE BACK GAUGE AND DIGITAL ON THE RAM.
150 Ton, RLM, 4-post cut-off press, 2 stroke, 106" x71.5"bed, 8" ram adj, 40 HP, Wichitaw clutch, S46265
Perfection Global | Elk Grove Village, IL
Category: Cut-off Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Rlm
Capacity: 150 TonStroke: 2"Bed: 106" x 71.5"Shut Height: 17"Ram Adjustment: 12" +Base to Press Bed: 52"Between Posts: 83.5" x 46"Post Diameter: 4.5"Motor: 40 hp, Upgraded Control PanelWichita Pneumatic ClutchHydraulic CylinderHydraulic Unit For Adjustable Base.
200 Ton, Clearing, OBI press, 54" x 35" bed, 36" x 28" ram, 10" stroke, 24" Shut Height, 35 SPM, air counterbalnce, cushion
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Clearing
* * * N E W 1 9 7 0 * * *, RATED CAPACITY (TONS). 200, BED AREA. L-R x F - B. 54" x 35", RAM AREA. L-R x F - B. 36" x 28", STROKE OF SLIDE. 10", SHUTHEIGHT. 24", ADJUSTMENT. 5" BY AIR MOTOR, SPEED (STROKES PER MINUTE). 35, WEIGHT. 55,000#, 30 TON CUSHION WITH 6" STROKE, AIR COUNTERBALANCE, MOTOR 20HP, 1200 RPM, OA ...more
200 Ton, Steelweld #IH210, hydraulic brake, 12' overall, 124" between housing, 12" stroke, 8" throat, #67275
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Steelweld
Model: IH210
SERIAL. H7605, MODEL. IH210, TONNAGE CAPACITY. 200 TON, LENGTH OF BED & RAM. 144", DISTANCE BETWEEN HOUSINGS. 10'4", STROKE. 12", OPEN HEIGHT. 18", CLOSED HEIGHT. 6", DEPTH OF THROAT. 8", PRESS SPEED ADVANCED. 144 IPM, PRESSING SPEED. 58 IPM, RETURN SPEED. 98", WIDTH OF BED. 8", PASSLINE HEIGHT. 36", ELECTRIC ...more
60 Ton, Johnson #60-FW-PC, OBI press, 4" stroke, 17-1/2" Shut Height, air clutch & brake, #76566
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Johnson
Model: 60-FW-PC
SERIAL. 64201, MODEL. 60-FW-PC, CAPACITY. 60 TON, STROKE OF SLIDE. 4", RAM ADJUSTMENT. 3-1/2", SHUT HEIGHT OVER BED (SDAU). 17-1/2", AREA OF BED. 32" X 21", AREA OF RAM. 13-1/4" X 11", STROKES PER MINUTE. 40 TO 120, HOLE THRU BACK. 15-1/2", BOLSTER. 32" X 21" X 2", DUAL PALM BUTTONS. YES, AIR CLUTCH & BRAKE. YES ...more
100 Ton, Rousselle #SS30-10, straight side double crank press, 3-1/2" stroke, 17-1/4" Shut Height, air clutch & brake, 7.5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rousselle
Model: SS30-10
SERIAL. 12354, MODEL. SS 30-100, CAPACITY. 100 TON, STROKE OF SLIDE. 3-1/2", SLIDE ADJUSTMENT MOTORIZED. 4", SHUT HEIGHT, SDAU. 17-1/4", AREA OF BED. 96" X 30", AREA OF RAM T SLOTTED. 96" X 30", T SLOTTED BOLSTER PLATE. 96 X 30" X 2", STROKES PER MINUTE. 40, OPENING BETWEEN UPRIGHTS (WINDOWS). 14", AIR CLUTCH AND ...more
200 Ton, Niagara #SG2-200-60-30, 10" stroke, 24" Shut Height, 6" adj, 60" LR x 30" front back bed, air clutch, 30 SPM
S & G Press & Machinery Sales | Shelby Township, MI
Category: Gap Frame Double Crank Press Machines
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Niagara
Model: SG2-200-60-30
Tonnage 200 Stroke 10 inches Shut Height 24 inches Adjustment 6 inches Bed Size 60" LR x 30" FB Ram Area 60" LR x 30" FB SPM 30 SPM, Standard, 200 ton Capacity, 10" Stroke, 24" Shut Height, 6" Adjustment, 60" LR x 30" FB Bed Area, 60" LR x 30" FB Slide Area, 30 ...more
Esco swaging press, 500 ton, 10 HP, 220/440 V., #76669
Yoder Machinery Sales | Holland, OH
Category: Swaging Machines (Swagers)
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Esco
SERIAL. 282, CAPACITY. 500 TON, DISTANCE BETWEEN DIE BASE PLATES:, OPEN. 8", CLOSED. 5", JAW TRAVEL. 3", CENTER OF PIN TO CENTER OF JAW. 12-1/2", JAW TRAVEL SPEEDS FROM EXTREME POSTIONS:, OPENING TIME. 14 SECONDS, CLOSING TIME. 14 SECONDS, MOTOR. 10HP, VOLTAGE. 220/440, DIMENSIONS-43" X 45" X 64" TALL, WEIGHT 5100 ...more
150 Ton, Blow #SC2-150-60-36, straight side double crank, 6" stroke, 18" Shut Height, 4" adj, 60" LR x 36" FB, air clutch, 30-50 SPM
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Blow
Model: SC2-150-60-36
Tonnage 150, Stroke 6 inches, Shut Height 18 inches, Adjustment 4 inches, Bed Size 60" LR x 36" FB, Ram Area 60" LR x 36" FB, SPM 30-60 VSPM, Standard, Blow Press Model SC2-150-60-36, Straight Side Mechanical Metal Stamping Press, 150 Ton Capacity, 6" Stroke, 18" Shut Height, 4" Adjustment, 60" LR x 36" FB Bed Area ...more
Hydraulic jack, Enerpac #RR150, 150 ton capacity, 13.1102 stroke, #70191
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Hydraulic Jack
SERIAL. 0311BR, MODEL. RR150, CAPACITY. 150 TON, STROKE. 13.1102, CYLINDER EFFECTIVE AREA PUSH. 30,71 IN SQ, CYLINDER EFFECTIVE AREA PULL. 14.80 IN SQ, COLLAPSED HEIGHT. 22.20, EXTENDED HEIGHT. 35.31", OUTSIDE DIAMETER. 8.0708.
800 Ton, Minster #90-800, 8" stroke, 25 SPM, new gears, rebuilt clutch, #5777
Alma Machinery Co-Ann Arbor MI | Ann Arbor, MI
Category: Knuckle Joint Press Machines
Seller: Alma Machinery Co-Ann Arbor MI
Location: Ann Arbor, MI
Mfr: Minster
Model: 90-800
capacity 800 ton, stroke 8", MAX. SHUT HEIGHT TO BED 29-1/4" sdau, bed area 28" X 36" RL X FB (31" FLOOR TO BED), speed 25 spm, ram area 22" X 18" (RL X FB), ram adjustment 1/2", bolster size 5" x 28-1/4" rl x 36" fb, clutch minster air clutch and brake (relined), New flywheel bearings installed in 2020, electrics ...more
150 Ton, Bliss #C-150, gap frame press, 8" stroke, 22" Shut Height, 4.5" adj., 50" x30" bed, 40 SPM, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Gap Frame Single Crank Press Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bliss
Model: C-150
SERIAL. H-67628, MODEL. C-150, TONNAGE. 150, STROKE. 8", SHUT-HEIGHT. 22", ADJUSTMENT. 4.5", SPM. 40, INCH, SINGLE, CONTINUOUS. CONTROLS, BED SIZE. 50" X 30", RAM SIZE. 34" X 24", BOLSTER THICKNESS. 4.5", PALM BUTTONS. YES, AIR COUNTER BALANCE. YES, BRONZE REPLACEABLE GIBS. YES, TRABON LUBE SYSTEM. YES, FOOT ISOLATION ...more
110 Ton, Amada #RG-100, CNC press brake, 10' overall, 100.5" between housing, 3.937" stroke, 15.75" throat, 14.58" open, NC9-EX, 1985
Blackstone Machinery | Cerritos, CA
Category: CNC Press Brakes
Seller: Blackstone Machinery
Location: Cerritos, CA
Mfr: Amada
Model: RG-100
Year: 1985
Year: 1985, Make: Amada, Model: RG-100, Tonnage: 110 Tons, Overall Length: 122", Between Housing: 100.5", Stroke: 3.937", Open Height: 14.58", Throat Depth: 15.75", Weight: 14,100lbs, Dimensions: 11' x 6.5' x 9'H, NC9-EX, Foot Treadle, Misc Punch Holders, 3 Finger Assemblies ...more
400 Ton, Heim #D2-400, straight side double crank press, 10" stroke, 27-3/16" Shut Height, air clutch, 1980, #14128J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Heim
Model: D2-400
Year: 1980
HEIM 400 TON SSDC PRESS, S/N H2691, STOCK# 14128J, CAPACITY 400 TONS, STROKE 10", SHUT HEIGHT 27.3/16" OVER BOLSTER, SPEED 20 SPM, BED SIZE 102"LR X 48" FB, RAM AREA 100" LR X 36" FB, RAM ADJ 6", APPROX WEIGHT 60,000 LBS, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCES, FLUSH FLOOR, WINDOWS 26 1/2".
110 Ton, Niagara #E-110, mechanical gap frame punch press, 5" stroke, 19.25" Shut Height, 65 SPM
National Machinery Exchange | Newark, NJ
Category: Gap Frame Single Crank Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Niagara
Model: E-110
110 TON NIAGARA E-110 MECHANICAL GAP FRAME PUNCH PRESS, MODEL#- E-110, SERIAL#- 47699, CAPACITY - 110 TONS, MAX RATED CAPACITY -.25 ABOVE BOTTOM OF STROKE, STROKE - 5, SHUT HEIGHT - 19.25, BED AREA L-R F-B 42" X 27", SLIDE AREA L-R F-B 34" X 23 1/2", STROKES PER MIN - 65, FOR A VIDEO, CLICK LINK BELOW ...more
60 Ton, Crosby #TA, straight shank, 12" length, 3.75" diameter, alloy hook, 2005
T R Wigglesworth Machinery | Bedford, OH
Seller: T R Wigglesworth Machinery
Location: Bedford, OH
Mfr: Crosby
Model: TA
Year: 2005
60 Ton, CROSBY STRAIGHT SHANK "HOOK ONLY" 2005 NEW IN BOX, MODEL TA, MODEL TA, "NEW IN BOX", TURNED,THREADED & DRILLED, CROSBY PART NO. 1024929, ACTUAL SHANK LENGTH 12", ACTUAL THREADED SECTION 4", SHANK TURNED DIAMETER 3 3/4", THREADS PER INCH 12 TPI, ACTUAL OVERALL LENGTH 34", ACTUAL OVERALL WIDTH 18", APPROX. ...more
60 Ton, Niagara #PN-60, straight side double crank press, 5" stroke, 13" Shut Height, air clutch & brake, 1982, #14169J
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Niagara
Model: PN-60
Year: 1982
NIAGARA 60 TON SSDC PRESS, S/N 51745, STOCK# 14169J, CAPACITY 60 TON, STROKE 5", SHUT HEIGHT 13", RAM ADJ 5", RAM 60" X 36", BED 60" X 36", WINDOWS 16", SPM 40, AIR CLUTCH/BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, TRIAD LIGHT CURTAINS, 69" BETWEEN HOUSINGS, 3" BOLSTER DRILLED & TAPPES, OAD 90"LR X 60"FB X 132" ...more
200 Ton, Minster #P2-200-48-44, straight side double crank stamping press, Wintriss SmartPac Control, 4" stroke, 22.5" Shut Height, 0-225 SPM
Master Machinery LLC | Detroit, MI
Seller: Master Machinery LLC
Location: Detroit, MI
Mfr: Minster
Model: P2-200-48-44
Manufacturer Minster Model P2-200-48-44 Condition Used Stock Number 11426 Capacity 200 ton Bed area 48"x44" Stroke length 4" Shut height (sdau on bed) 22.5" (to top of bed) Slide adjustment (powered) 6" Strokes per minute 0-225 Windows (opening in side columns) 14" Additional s Wintriss SmartPac Press Controls ...more
100 Ton, Wysong #THS100-72, hydrauic press brake, 6' overall, 8" stroke, 7" throat, 1 shot lube, 15 HP, 2005
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wysong
Model: THS100-72
Year: 2005
SERIAL. MH6-1-R, MODEL. THS100-72, YEAR. 2005, CAPACITY. 100 TON, OVERALL LENGTH OF BED & RAM. 72", DISTANCE BETWEEN HOUSING., STROKE. 0-8", OPEN HEIGHT. 17", RAM ADJUSTMENT. 9", DEPTH OF THROAT. 7", RAM SPEED APPROACH. 400 IPM, RAM SPEED FORMING. 0 TO 40 IPM, RAM SPEED RETURN. 400 IPM, STROKE TOP/BOTTOM STOP ...more
100 Ton, Clearing, straight side double crank press, 1-1/2" stroke, 10 HP, air clutch & brake, Farval automatic lube
Aleco Machinery Sales | Milwaukee, WI
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Clearing
Pre Owned Clearing 100 Ton Straight Side Double Crank Press, Serial Number 55-18837, Capacity 100 TONS, Ram Area 48’ X 24”, Bed Area 48” X 24”, Stroke 1 1/2”, Adjustment 2 1/2”, Open Height 12.1/2”, Closed Height 14”, Windows 18” X 9”, Bed Height 37” ...more
200 Ton, Danly #CH-200-36-44, hydraulic press, 24" stroke, 53" daylight, 36" x44" bed, 24" str, 53" DL, Hydrapower
Wisconsin Metalworking Machinery | Waukesha, WI
Category: Hydraulic Presses
Seller: Wisconsin Metalworking Machinery
Location: Waukesha, WI
Mfr: Danly
Model: CH-200-36-44
, MANUFACTURER. DANLY, MODEL. CH-200-36-44, SERIAL. 62173301, TONNAGE. 200, BED AREA. 36" X 44" BOLSTER AREA. 36" X 44" X 5" BED OPENING. 29" X 29" CUSHION CAPACITY. 50 TONS, SLIDE AREA. 36" X 44", STROKE. 24", DAYLIGHT. 53", SPEEDS, RAPID ADVANCE. 129 IPM, PRESSING. 44 IPM, RETURN. 172 IPM, HEIGHT WITH CYLINDER ...more
100 Ton, Baileigh #PPTK-100/30, CNC press brake, 10' overall, 100" between housing, 5.07"stroke, 12" throat, 24" BG, 2-Axis, YSD6000, 2021
Manufacturing Solutions | Santa Ana, CA
Category: CNC Press Brakes
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Baileigh
Model: PPTK-100/30
Year: 2021
100 Tons120"100"12"5.07"15.3"3.9" /sec2.34" /sec1/2 HP24"7 HP124 x 53 x 96"H14,000 lbs..
200 Ton, Pacific #200-D8-48-96, straight side hydraulic press, 24" stroke, 36" daylight, 1995, #8745
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Pacific
Model: 200-D8-48-96
Year: 1995
(1) Used 200 Ton Pacific Straight Side Hydraulic Press, Serial number: A-1183, Capacity: 200 Tons, Stroke: 24, Daylight: 36, Bed Size: 96LR x 48FB, Speeds: 335 IPM Rapid Advance, 0 - 35 IPM Pressing, 289 IPM Rapid Retract, Windows: 26 Wide, Hydraulic Die Cushion - Estimated @ 66 Ton / 34 x 34 pad / 8 - 18 stroke ...more
400 Ton, Clearing #S2-400-108-60, 20" stroke, 60" Shut Height, 12" adj, 108" LR x 60" front back,air clutch, 20 SPM
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Clearing
Model: S2-400-108-60
Tonnage 400, Stroke 20 inches, Shut Height 60 inches, Adjustment 12 inches, Bed Size 108" LR x 60" FB, Ram Area 108" LR x 60" FB, SPM 20 SPM, Standard, Clearing Mechanical Press, Metal Stamping / Die Tryout Press / Hand Transfer, Model S2-400-108-60, 400 ton Capacity, 20" Stroke, 60" Shut Height On Bed, 12" ...more
160 Ton, 10.9 oz., Borche #Bi160, servo hydraulic horizontal plastic injection molder, 18.5" x 18.5" tie bar spacing, 37.4" open daylight, 2022 (3 available)
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Borche
Model: BI160
Year: 2022
, 2022 160 Ton Borche Bi160, Servo-Hydraulic, Shot size: 10.9 oz, Screw diameter: 45 mm, Tie bar spacing: 18.50" x 18.50", Platen size: 27.16" x 27.16", Max. Open daylight: 37.40", Hours: 533, 460 volts., We have 3 identical machines available., Imperial Metric Tonnage 160 T 145.15 t Shot Size 10.9 oz 309 g Year 2022 ...more
90 Ton, Chicago Dries & Krump #68L, 8' overall, 78" between housing, 3" stroke, 10" throat, 4" adj., 14.5"open
D & D Industries Inc | Monclova, OH
Category: Mechanical Press Brakes
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Chicago
Model: -68L
MODEL: 68L, SERIAL #: L 16042, 60 - 90 TONS CAPACITY, 8' OVERALL BED LENGTH, 78" DISTANCE BETWEEN HOUSINGS, 10" THROAT, 4" MOTORIZED ADJUSTMENT, 3" STROKE, 14-1/2" MAXIMUM OPEN HEIGHT, MANUAL BACK GAUGE, FOOT TREADLE, MOTOR: 5 HP/ 3/ 60, APPROXIMATE DIMENSIONS: 96" LR x 60" FB x 85" H, APPROXIMATE WEIGHT: 9000 LBS ...more
JUST ADDED!
Geka #Hydracrop-100/A, Hydraulic Ironworker, 100 ton, 24" x 5/8" Flat Shear, Assorted Tooling Included
Revelation Machinery | Chicago, IL
Category: Ironworkers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Geka
Model: HYDRACROP-100/A
Year: 1900
Make: GEKA, Model: HYDRACROP 100/A, Year: 1900, Machine Location: Illinois, Punching Power: 100 Tons, Punch Throat Depth: 12″, Flat Plate Shear Cutting Capacity: 24″ x 5/8″, Angle Cutting Capacity: 6″ x 6″ x 1/2″, Round Bar Shear Capacity: 2″, Square Bar Shear Capacity: ...more
110 Ton, Komatsu #OBS110H-VS-3, gap press w/Servo feeder, 4.33" stroke, 14.96" Shut Height, 3.94" adj, 60-120 SPM
Galaxie Corporation | Wayne, MI
Category: Gap Frame Single Crank Press Machines
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Komatsu
Model: OBS110H-VS-3
, Model: OBS 110H-VS-3, Tonnage: 110 tons, Bed Size: 43.31" x 27.50" (1100 mm x 700 m), Model: OBS 110H-VS-3, Year: 1996, Bed Size: 43.31" x 27.50" (1100 mm x 700 m), Slide Area: 23.62" x 21.65" (600mm x 550 mm), Stroke: 4.33" (110mm), Shut Height: 14.96" (380mm), Adjustment: 3.94" (100mm), Speed: 60-120 SPM ...more
60 Ton, Accurpress #7606, hydraulic press brake, 6' overall, 52" between housing, 8" stroke, 8" throat, 14" open, pedestal Control, manual Back Gauge, 1989
Manufacturing Solutions | Santa Ana, CA
Category: Hydraulic Press Brakes
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Accurpress
Model: -7606
Year: 1989
60 Tons72"52"8"8"14"6"230v / 3ph10 HP130 IPM25 IPM88" x 42" x 74"H8,000 lbs..
60 Ton, Bruderer #BSTA60IIUSL, high speed stamping press, 0625" to 2" stroke, 2.5" ram adjustment, 1998
Perfection Global | Elk Grove Village, IL
Category: High Speed and Automatic Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Bruderer
Model: BSTA60IIUSL
Year: 1998
Tonnage Capacity (U.S. Short Ton): 60 TonsAdjustable Stroke: 0.625" - 2" (7 Positions)Stroke Speed: 150 - 1120 SPMBolster Plate Surface Area (R-L x F-B): 42.5" x 25.6"Base Plate Opening (R-L x F-B): 41.7" x 7.9"Ram Surface Area (R-L x F-B): 38.6" x 16.5"Ram Adjustment: 2.5"Shut Height (w/ 0.625" Stroke Length): ...more
300 Ton, Eagle #SC2-300-108-48, straight side double crank mechanical press, 12" stroke, 38" Shut Height, air clutch, 1995
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Eagle
Model: SC2-300-108-48
Year: 1995
Tonnage 300, Stroke 12 inches, Shut Height 38 inches, Adjustment 6 inches, Bed Size 108" LR x 48" FB, Ram Area 108" LR x 48" FB, SPM 25-50 VSPM, Standard, Eagle Press Model SC2-300-108-48, Used Straight Side Double Crank Mechanical Press, 300 ton Capacity, 12" Stroke, 38" Shut Height on Bed, 32" Shut Height over ...more
15 Ton, Perkins #15S, gap frame press, 1-1/2" stroke, 7-3/4"Shut Height,air clutch & brake, 100-300 SPM
D & D Industries Inc | Monclova, OH
Category: Gap Frame Single Crank Press Machines
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Perkins
Model: 15S
MODEL #: 15-S, SERIAL #: 44935, 1 1/2" STROKE, 2 1/4" RAM ADJUSTMENT, 7 3/4" SHUT HEIGHT, 1 1/4" SHANK, 10" x 20" BED, DIALATRON 400 TONNAGE MONITOR, RECIRCULATING LUBE SYSTEM, 2" BOLSTER, 3 HP 230/460/60/3, AIR CLUTCH, AIR BRAKE, 100-300 SPM, CONTROL CONSOLE, 48" LR x 40" FB x 88" TALL, 4500 LBS ESTIMATED WEIGHT ...more
60 Ton, Wysong #MTH60-96, CNC hydraulic press brake, Hurco Autobend Control, 8' overall, 78" between housing, 6" stroke, 7.5 HP
Manufacturing Solutions | Santa Ana, CA
Category: CNC Press Brakes
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Wysong
Model: MTH60-96
60 Tons96 "78"6"6"15"7.5 HP300 IPM20 IPM200 IPM230V, 3 PH9' x 5' x 7.7'H.
200 Ton, Danly #200, Back Gauge OBI press, 8" stroke, 24" Shut Height, 4.5"adj., 60 SPM, 57" x34"bed, GE/Fanuc Logic Master PLC, air clutch & brake, 25 HP motor
Prestige Equipment Corp | Melville, NY
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Danly
Model: 200
Tonnage: 200 TONS, Stroke: 8", Shut Height: 24", Ram Adjustment: 4.5", Ram Speed: 60 SPM, Ram Area: 24" X 26", Bed Size: 57" X 34", Opening Thru Back: 30", Approx. Weight: 51,000 LBS, GE/Fanuc Logic Master PLC, Air Clutch, Air Brake, Dual Palm Buttons, 25 HP Main Motor, NOTE:, No Pit Required! Flush Floor Mount, s: ...more
100 Ton, Schuler Beuhler #C-1000kN, 5" stroke,C-frame stamping press, air clutch, 2012, #A5080
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Schuler
Model: C-1000KN
Year: 2012
Capacity 100 Ton x 5" Stroke 5" Stroke Adjustment 3.9" Maximum Open Height 14.5" Table Size 37" x 25" Shank Hole 1.9" Distance of the Slide, Maximum Tool Dimension (BxD) 21" x 17" Distance Between Center of Slide and Leading Edge of Table 12.9" Horsepower 10 H.P. Maximum Speed With Continuos Stroke 30 - 90 (min-1) ...more
60 Ton, Accurpress #7606, hydraulic press brake, 6' overall, 52" between housing, 8" stroke, 10" throat, 1988
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Accurpress
Model: -7606
Year: 1988
SERIAL. 1303, MODEL. 7606, YEAR NEW. 1988, CAPACITY. 60 TONS, OVERALL LENGTH OF BED & RAM. 72", DISTANCE BETWEEN HOUSINGS. 52", STROKE OF RAM. 8", OPEN HEIGHT. 14", CLOSED HEIGHT. 6", DEPTH OF THROAT. 10", RAM SPEED FAST APPROACH. 130 IPM, RAM SPEED SLOW BEND. 24 IPM, RAM SPEED FAST RETURN. 220 IPM, ELECTRIC FOOT ...more
110 Ton, Komatsu #110-OBS, gap frame press, 5.9" stroke,air clutch & brake, 32-65 SPM, 1981
S & G Press & Machinery Sales | Shelby Township, MI
Category: Gap Frame Single Crank Press Machines
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Komatsu
Model: 110-OBS
Year: 1981
Tonnage 110, Stroke 5.91 inches, Shut Height 18.9 inches, Adjustment 3.94 inches, Bed Size 43.31" x 27.56", Ram Area 23.62 x 17.72, SPM 32-65, Standard, Used Komatsu OBS Press, Single Crank Gap Frame, 110 ton Capacity (Metric), 121 ton Capacity (US), 5.91" Stroke, 18.9" Shut Height On Bed, 14.96" Die Height On ...more
100 Ton, Minster #P2-100-48 Piece Maker, straight side double crank, 4" stroke, 20" Shut Height, 4" adj., 48" x31"bed, 100-200 SPM, Minster clutch, Wintress SmartPac2, 1970
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Minster
Model: P2-100-48
Year: 1970
SERIAL.: P2-100-19206, MODEL.: P2-100-48, TONNAGE.: 100, STROKE LENGTH.: 4", SLIDE ADJUSTMENT.: 4", SHUT HEIGHT.: 20", SPM.: 100-200 VARIABLE, CLUTCH AIR PRESSURE.: 60 LBS., BED SIZE.: 48" X 31", T SLOTTED RAM.: YES, T SLOTTED BOLSTER.: YES, MINSTER CLUTCH.: YES, VOLTAGE.: 240, WINTRISS SMARTPAC2 PRESS AUTOMATION ...more
60 Ton, Niagara #M60, OBI flywheel press, 6" stroke, 19.25" Shut Height, 3.5"adj., 32" x21"bed, 100 SPM, air clutch & brake, 1985
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Niagara
Model: M60
Year: 1985
MDL# M-60 S/N# 52376 NEW 1985 CAPACITY 60 TON STROKE 6" SHUT HEIGHT 19.25" SLIDE ADJUSTMENT 3.5" (MOTORIZED ) BED AREA 32" LR X 21" FB SLIDE AREA 21" LR X 16" FB SPEED 100 SPM OAD 54" LRX 90 FB X 128" T APPROX WEIGHT 10,000 LBS EQ WITH : AIR CLUTCH AND BRAKE LINK OMNILINK II LCD CONTROLS LINK BLACK MAX LIGHT CURTAINS ...more
100 Ton, Goiti #CFR, 5.5" stroke, 11.2" Shut Height, 3.5" adj, 38" x 24.5" bed, T-slotted, gap frame press
Presses for Industry | Detroit, MI
Category: Gap Frame Single Crank Press Machines
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Goiti
Model: CFR
PRELIMINARY, GOITI GAP FRAME PRESS, MODEL CFR, S/N 84-429-51, 100 TON CAPACITY, 5.5" STROKE (140 mm), 11.2" SHUT HEIGHT, 3.54" ADJUSTMENT (90 mm), 38" LR X 24.5" FB BED AREA, 24" LR X 18" FB RAM AREA, 56 SPM, WINTRESS MODEL WPC-1000 CLUTCH & BRAKE CONTROLS, OMRON SAFETY LIGHT CURTAINS, OPERATOR PALM BUTTONS ...more
60 Ton, South bend South Bend #60-FW-AC, OBI press, 4" stroke, 12.5" Shut Height, 3.5" adj., air clutch & brake
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: South Bend
Model: 60-FW-AC
Tonnage 60 tons Stroke 4 inches Ram Adjustment 3.5 Shut Height 12.5 inches Bed Size 32" x 21" Ram Size 13.25" x 11.5" Ram SPM 100 Air Clutch (Yes/No) yes Air Brake yes Dual Palm Buttons yes Crank (Single/Double) single CNC Control yes Type of CNC Control Link Dimensions 68" LR x 66" FB x 109" Tall Weight 10000 pounds.
Edwards, Deluxe Ironworker, w/ Powerlink System, 100 Ton, 65000 psi, 1-15/16" stroke, 11" throat, 8-3/4" open, 6-13/16" Shut Height, 10 HP, new
Revelation Machinery | Chicago, IL
Category: Ironworkers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Edwards
Year: 2026
Make: Edwards, Model: 100 Ton, Year: 2026, Machine Location: Minnesota, Tonnage: 100, Max Capacity: 1-1/16″ Dia. in 1″ A36, (65,000 PSI Tensile), Stroke: 1-15/16″, Throat Depth: 11″, Open Height: 8-3/4″, Shut Heigh: 6-13/16″, Work Station: 39-3/8″, Standard Motor: 10 HP 3~ 208 ...more
60 Ton, Johnson #MP60FW, OBI Single Crank Press, 4" stroke, 12-1/2" shut height, 32" x 21" bed, 3-1/2" adjustment, 100 SPM, air clutch
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Johnson
Model: MP60FW
Rated Capacity.(tons). 60, Stroke of Slide. 4", Shutheight. 12-1/2", Adjustment. 3-1/2", Bed Area.(l-r x f-b). 32" x 21", Ram Area.(l-r x f-b). 32-1/4" x 11-1/2", Bolster.(l-r x f-b x thick). 32" x 21" x 3", Strokes Per Minute. 100 SPM, Weight. 10,000 lbs., O.A. Dim.(l-r x f-b x hi). 7'2" x 5' x 9'8", - ...more
60 Ton, 4.3 oz., Boy #55EVV-205, Vertical Injection Molding Machine, 38 mm screw, 21.7" daylight, 14.2" x 13.2" tie bar, Procan Alpha 4 ctrller, 2016
Arlington Machinery | Lake Zurich, IL
Category: Screw Type Injection Molding Machine
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Boy
Model: 55EVV-205
Year: 2016
Used 60 Ton Boy Vertical Injection Molding Machine, Model 55EVV-205, 4.3 Oz, New In 2016 Tonnage: 60 Ton Screw Diameter: 38MM Shot Size: 4.3 Oz Distance Between Tie Bars: 14.17" x 13.19" Max Daylight: 21.65" Min Mold Height: 9.84" Max Opening Stroke: 11.81" Controller: Procan Alpha 2 Control Hours: 3,000 Approximate ...more
150 Ton, York #YLAA0155, Air Cooled Chiller, 460 V.
LEL Critical Equipment | Spartanburg, SC
Category: Chillers
Seller: LEL Critical Equipment
Location: Spartanburg, SC
Mfr: York
Model: YLAA0155
150 Ton York Air Cooled Chiller – Model YLAA0155 The York YLAA0155 is a high-performance 150-ton air-cooled chiller, engineered to provide reliable and efficient cooling for large-scale commercial and industrial applications. Designed for spaces such as office buildings, manufacturing facilities, hospitals, and ...more
60 Ton, Bliss #C-60, OBI press, 4" stroke, Cieco controls, air clutch & brake, 1984
Aleco Machinery Sales | Milwaukee, WI
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Bliss
Model: C-60
Year: 1984
Pre Owned 1984 Bliss Model C-60 OBI Press, Serial Number: H70088, Capacity 60 TONS, Stroke 4”, Open Height 18 1/4”, Closed Height (SDAU) 14 1/4”, Ram Area 17” W X 11’ FB, Bed Area 32” W X 21” FB, Opening Through Back 12” X 12”, Speed SPM, Main Motor Horsepower HP ...more
100 Ton, Wysong #MTH100-120, hydraulic brake, 10' overall, 96" between housing, 8" stroke, 7" throat, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wysong
Model: MTH100-120
SERIAL. MT7-1209MODEL. MTH 100-120YEAR NEW.CAPACITY. 100 TONSOVERALL LENGTH OF BED & RAM. 120"DISTANCE BETWEEN HOUSING. 96"STROKE. 8"OPEN HEIGHT. 17"CLOSED HEIGHT. 9"DEPTH OF THROAT. 7"RAM SPEED APPROACH. 300 IPMRAM SPEED PRESS. 20 IPMRAM SPEED RETURN. 225 IPMELECTRIC FOOT PEDAL. YESWIDTH OF BED. 4-1/4"PASS LINE ...more
1000 Ton, Ajax mechanical press, 25" Shut Height, 40 SPM
Reid Machinery Inc | Lansing, MI
Seller: Reid Machinery Inc
Location: Lansing, MI
Mfr: Ajax
1000 Ton Ajax Mechanical Press Asset: L015 Serial Number: 3512 Capacity: 1000 Ton SPM: 40 Shut Height: 25" Bed Area L to R & F to B: 20" x 45" Slid Area L to R & F to B: 24" x 28" Floor Space: L-R & F-B 6' x 6' Height Above Floor: 15' Approximate Weight: 97,000 lbs. are correct to the best of ...more
110 Ton, Aida #PR-XGC-100, gap frame press, 6.6" stroke, 2.95" adj., 50 SPM, 41.7" x22" bed, air clutch & brake
Yoder Brothers Machinery | Toledo, OH
Category: Gap Frame Single Crank Press Machines
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Aida
Model: PR-XGC-100
SERIAL. 196, MODEL. PR-XGC-100, CAPACITY. 110 TON, STROKE. 6.6", SLIDE ADJUSTMENT. 2.95", SPEED. 50 SPM, BED AREA. 41.7" X 22", RAM AREA. 23.6" X 17.7", CLOSED HEIGHT. 13.7" STROKE DOWN, ADJUSTMENT UP, AIR CLUTCH & BRAKE. YES, CONTROLS. YES, MAIN MOTOR. 7.5 HP.
12" Minster #20-12, press feed line, 60 ton, (2) Littell double end uncoilers, 13.5"-20.5" manual expansion
D & H Machinery Inc | Toledo, OH
Category: Press Feed Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Minster
Model: 20-12
12" Wide Minster Press Feed Line -(2) Littell Double End Uncoilers: 2,000# x 12" Wide Capacity each side Model: 20-12 Manual Expansion: 13.50" - 20.50" Air Drag Brake 60" Maximum Coil OD -(2) Minster Motorized Coil Straighteners: -(2) Minster High Speed Mechanical Presses: Minster: Model P2-60 Capacity: 60 Ton 0 - 500 ...more
120 Ton, Farger &Joosten, multipower air/oil press, 7.9 stroke, 26" DL, 24" x17"bed, 24" passline
D & D Industries Inc | Monclova, OH
Category: Air Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Farger&joosten
ORDER 120, 120 Ton FARGER & JOOSTEN MULTIPOWER Air/Oil Press Serial Number: 2747 : This is a Multipling type Air Over Oil Press See: http://farger-joosten.de NOTE: Will Sell Either Power Unit on the Mounting Plate with a Four Post Guided Ram or Ecerything at the same Price. We will Remove, Pack, and Protect the ...more
60 Ton, Accurpress #7608, hydrauic press brake, 8' overall, 78" between housing, 8" stroke, 10" throat, 10 HP, 1985
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Accurpress
Model: -7608
Year: 1985
SERIAL. 693, MODEL. 7608, YEAR. 1985, CAPACITY. 60 TONS, OVERALL LENGTH OF BED & RAM. 96, DISTANCE BETWEEN HOUSINGS. 78", STROKE OF RAM. 8", OPEN HEIGHT. 14", CLOSED HEIGHT. 6", DEPTH OF THROAT. 10", RAM SPEED FAST APPROACH. 90 IPM, RAM SPEED SLOW BEND. 24 IPM, RAM SPEED FAST RETURN. 180 IPM, ELECTRIC FOOT PEDAL. ...more
Peddinghaus Ocean #AFPS-623C-Clipper-II, CNC angle, flat bar, punch & shear line, 6" x 6" x 5/8" angle, Siemens Simatic, 2024
Prestige Equipment Corp | Melville, NY
Category: Angle Punches
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Ocean
Model: AFPS-623C-CLIPPER-II
Year: 2024
Punch Tonnage Capacity: 75 Tons, Shear Tonnage Capacity: 100 Tons, Max. Angle Size: 6" x 6" x 5/8", Min. Angle Size: 1-1/2" x 1-1/2" x 1/8", Max. Flat Bar: 6" x 5/8", Min. Flat Bar: 2" x 1/4", Max. Punch Size: 1-1/4", Punch Cycle Time: 2 Sec., Shear Cycle Time: 5 Sec., Shear Slug Size: 1/2", In-Feed Speed (X-Axis): 61 ...more
6 MW Cooper-Bessemer #LSVB-20-GDT, Duel Fuel Generator
Mauldin Machine Inc | Jacksonville, AR
Category: Natural Gas Or Dual Fuel Generators
Seller: Mauldin Machine Inc
Location: Jacksonville, AR
Mfr: Cooper-Bessemer
Model: LSVB-20-GDT
Mauldin Machine Inc., Dealers in New and Used Industrial Machinery, PROPOSAL, We are pleased to offer, subject to prior sale and our “Standard Terms and Conditions of Sales”, for immediate acceptance, the following:, ONE COOPER-BESSEMER DUEL FUEL 6MW GENERATOR, Manufacturer: Cooper-Bessemer, Model: ...more
