Buy or Sell Your 600 Ton Presses
AI-ranked results for 600ton - closest matches first
500 Ton, Accurpress #7500-14, hydraulic down-acting press brake, 14' overall, 146" between housing, 10" stroke, 12" throat, front operated power back gauge, ETS-200, 2000
Presses for Industry | Detroit, MI
Category: Hydraulic Press Brakes
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Accurpress
Model: 7500-14
Year: 2000
Preliminary Subject to confirmation, --------------------------------------------------, 500 Tons Capacity, 14' overall bed length, 10" stroke of ram, 18" open height, 8" closed height, 12" throat Dept, 168" Bed length overall, 146" between housings, 38" bed height from floor, s, --------, ETS 200 Premium/14 ...more
100 Ton, Standard #AB100-12, hydraulic CNC press brake, 12' overall, 125" between housing, 6" stroke, 6" throat, 13" open, Automec 300 Autogauge, (2) electric foot switches
Wheeler Machinery Sales | Pomona, CA
Category: CNC Press Brakes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Standard
Model: AB100-12
Standard AB100-12 Hydraulic Press Brake #7563 #2, Forming / Punching: 100 / 66 Tons, Bed/Ram Length: 12 ft, Between Frames: 10'-5", Open Height: 13 in, Stroke: 6 in, Closed Height: 7 in, Throat Depth: 6 in, Shipping Weight: 21,000 lbs., Automec CNC 300 Autogauge, (2) Electric Foot Switches, Light Curtains.
300 Ton, PH Hydraulics #4C-300-P, hydraulic press, 24" stroke, 36" daylight, 65" x48" bed, 16" bore, 1994
Machinery Resources Intl | Simi Valley, CA
Category: Hydraulic Presses
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Ph Hydraulics
Model: 4C-300-P
Year: 1994
PH HYDRAULICS 4C 300-P HYDRAULIC PRESS, NEW: 1994, 2 MACHINES AVAILABLE, 300 TON, DOWNACTNG, CAPACITY: 300 TON, STROKE LENGTH: 24", DAYLIGHT OPENING: 36", BED AREA: 65"(LR) X 48"(FB), DISTANCE BETWEEN POSTS: 48"(LR) X 31"(FB), SPEEDS:, - ADVANCE: 280 IPM, - PRESS: 60 IPM, - RETURN: 360 IPM, 400 GALLON RESERVOIR, MAX ...more
100 Ton, Oak #FP3-54-1422, fin press line, 1.5" stroke, 9"-12" Shut Height, 51" x48" die area, 1994
D & H Machinery Inc | Toledo, OH
Category: Fin Press Machines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Oak
Model: FP3-54-1422
Year: 1994
Oak FP3-54-1422 Fin Press Line, Tonnage: 100, Die Area: 51" l-r x 48" f-b, Stroke: 1.50", Shut height: 9" - 12", Bolster: 5", Withdrawal Travel: 9" - 14", Speed: 133 - 300 spm, Electrics: 460 volt, 3 ph, 60 cycle, Oak uncoiler, Fin stock lube tank, Fin vacuum suction unit, Oak fin Stacker, Height of the press: 135" ...more
400 Ton, Accurpress #74008, CNC Press Brake, 8' overall, 148" between housing, 10" throat, 10" ram, 20" open, 10" Shut Height, 40 HP, ETS cnc Control, foot pedal, Backgauge, 2005
Revelation Machinery | Chicago, IL
Category: CNC Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Accurpress
Model: 74008
Year: 2005
Make: Accurpress, Model: 74008, Year: 2005, Machine Location: Georgia, Capacity: 400 Tons, Bed Length: 96″, Distance Between Frames: 148″, Throat Depth: 10″ , Ram Stroke: 10″, Open Height: 20″, Closed Height: 10″, Backgauge: CNC X/Y/R (ETS series), Spindle Horsepower: 40 HP ...more
No. BMS-1090 Enerpat, Automatic Metal Chips Briquette Press Machine, 15 HP, 3.5" Diameter Briquettes, 100T Press Force
Enerpat | Central Ohio, OH
Category: Briquetters
Seller: Enerpat
Location: Los Angeles, CA
Mfr: Enerpat
Model: BMS-1090 (SINGLE OUTPUT)
Year: 2026
Enerpat BM-1090 Single Output Metal Briquetting Press – Compact, Reliable, Fully Automatic Model: BM-1090Type: Single Output Metal Briquetting Press, Press Force: 100 Ton Briquette Diameter: 3.5" (90 mm) Motor Power: 15 HP (11 kW) hydraulic system (Siemens / Schneider components) System Pressure: 3,625 psi (25 ...more
90 Ton, Weldwire #WER-90, Powered Tank Turning Rolls With Idler, 18" diameter Wheel, 8" to 18' suitable diameter
Yoder Brothers Machinery | Toledo, OH
Category: Power Tank Turning Rolls
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Weldwire
Model: WER-90
POWER DRIVE ROLL:, MODEL. WER-90, YEAR NEW. 2011, CAPACITY. 90 TON, CAPACITY W/ IDLER ROLL. 180 TON, SUITABLE DIAMETER. 8" TO 216" (18'), DIAMETER OF WHEEL. 18", ROTATION SPEED. 4 TO 40 INCHES PER MINUTE, MOTOR POWER. 7.5 HP, IDLER ROLL:, MODEL. WER-90-I, YEAR NEW. 2011.
200 Ton, Eagle #PH2-200-118-48, hydraulic press, 48" stroke, 68" daylight, 118" x48" bed, 250 gallon hydraulic reservoir, 1998
D & D Industries Inc | Monclova, OH
Category: Hydraulic Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Eagle
Model: PH2-200
Year: 1998
ORDER 200, 200 Ton Eagle Hydraulic Press., Model PH2-200 118-48., s/n EP 98-10218., 48” stroke., 68” Daylight., 118” LR x 48” FB Ram, 118” LR x 48” FB Bed., Slide Advance (fast) 470 IPM, Slide Advance (slow) 40 IPM, Slide Retract (fast) 475 IPM, Floor Standing., Palm Buttons., 4 ...more
1000 Ton, Ermaksan #Power-Bend, double tandem press brake, 46.6' bend L, 39.3" throat, Delem 66T Control, 2022
VX Machinery | Sylvania, OH
Category: CNC Press Brakes
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Ermaksan
Model: POWER-BEND
Year: 2022
, Manufacturer: Ermakstan, Bending Length: 46.58’, Tonnage: 1000 Tons, Throat Depth: 39.34”, Delem 66T Controller, 2-Axis Backgauge, Motorized Crowning, Laser Bend Line.
300 ton, Minster #E2-300-72-42 Hevi-Stamper, Striaght Side Mechanical Press, 8" stroke, 1997
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Minster
Model: E2-300-72-42
Year: 1997
Tonnage 300, Stroke 8 inches, Shut Height 26 inches, Adjustment 6 inches, Bed Size 72" LR x 42" FB, Ram Area 72" LR x 42" FB, SPM 0-100, Standard Used Minster Straight Side Mechanical Stamping Press Model E2-300-72-42 Hevi-Stamper, Serial Number/ 29119, Price includes a comprehensive mechanical rebuild, featuring all ...more
400 Ton, Pacific #K400-16, hydraulic press brake, 16' overall, 172" between housing, 12" stroke, 1968
Perfection Global | Elk Grove Village, IL
Category: Hydraulic Press Brakes
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Pacific
Model: K400-16
Year: 1968
Maximum Tonnage: 400 TonPunching Capacity: 266 TonOverall Bending Length: 192"Distance Between Housings: 172"Bending Capacity: 3/8" x 14'Length of Ram Stroke: 12"Daylight Opening: 20"Closed Height: 8"Rapid Advance: 57 IPMNormal Press: 25 IPMReturn Speed: 55 IPMPit Required .
300 Ton, Blow #SE2-300-96-648 straight side double crank mechanical press, 10" stroke, 30" Shut Height, air clutch & brake, 1993
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Blow
Model: SE2-300-96-648
Year: 1993
Tonnage 300, Stroke 10 inches, Shut Height 30 inches, Adjustment 10 inches, Bed Size 96" LR x 48" FB, Ram Area 96" LR x 48" FB, SPM 0-70, Standard, 300 ton Capacity, 10" Stroke, 30" Shut Height, 24" Die Height on Bolster, 96" LR x 48" FB Bed Area, 96" LR x 48" FB Slide Area, 0-70 VSPM, Equipment and s, Air Clutch and ...more
XY Tool #Bar-Shear, 3/4" to 1.75" capacity, 130 ton force, automatic cycle, 100 HP, 2000
FH Machinery Inc | Ivyland, PA
Category: Bar and Billet Shears
Seller: FH Machinery Inc
Location: Ivyland, PA
Mfr: Xy Tool
Model: BAR-SHEAR
Year: 2000
Capacity3/4" to 1.75" Cutting Force130 Tons Shear Length12" to 36" Maximum Bar Length43" (3-15" Bar Feeds) Hydraulic Unit Motor100 Horsepower Auto CycleYes.
110 Ton, Amada #HG-1003-ARS, Press Brake, 6-Axis, 10.4' Overall length, 106.3" Between Housings, 9.8" Stroke, 2017
Machine Tool Technologies | Milwaukee, WI
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: HG 1003 ARS
Year: 2017
Spec, Tonnage: 110 T, Type: HYD, Overall Length: 122.44″, Between Housings: 106.3″, Stroke: 9.8″, # Axis: 6, Dimensions: 440.9″ x 234.6″ x 109.6″, Weight: 33100 lbs., Control: CNC (AMNC 3i), Brand – AMADA.
100 Ton, Magnum #MSS95A, 51" x 36" bed, 34" open height, 8" stroke, 26" Shut Height, Allen Bradley controls, 2011
Variegate Inc | Huntsville, AL
Category: Hydraulic Presses
Seller: Variegate Inc
Location: Huntsville, AL
Mfr: Magnum
Model: MSS95A
Year: 2011
, LOW Stroke Count!, Capacity: 19.6 to 98.2 tons, Daylight: 34", Shut Height: 26", Bolster Height: 36", Bed Size: 51" LR x 36" FB, Stroke: 1" to 8", Rapid Advance: 411 ipm, Pressing: 66 ipm, Retract: 395 ipm, Motor HP: 30, Light Curtains Front, Hard Guarding Back and Sides, 40% additional panel space, 110 Volt Outlet ...more
60 Ton, Johnson #60J, OBI press, 4" stroke, 10-1/4" Shut Height, air clutch & brake, 5 HP, 47 SPM
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Johnson
Model: 60J
SERIAL. 67432, MODEL. 60J, CAPACITY. 60 TON, STROKE OF SLIDE. 4", RAM ADJUSTMENT. 3", SHUT HEIGHT OVER BED (SDAU). 10-1/4", AREA OF BED. 32" X 21", AREA OF RAM. 13" X 11", STROKES PER MINUTE. 47, HOLE THRU BACK. 15-1/2", BOLSTER. 32" X 21" X 1-1/2", DUAL PALM BUTTONS. YES, AIR CLUTCH & BRAKE. YES, INCHING, SINGLE ...more
100 Ton, Accurpress #710012, CNC Hydraulic Press Brake, 12' overall Bending length, 34" H bed, 8" stroke, 10" throat depth, 10 HP, 220/440 V, 1995
Wheeler Machinery Sales | Pomona, CA
Category: CNC Press Brakes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Accurpress
Model: 710012
Year: 1995
1995 Accurpress 710012 CNC Hydraulic Press Brake - 100 T x 12' #7321, Located in Elkhart, Indiana., Capacity: 100 Tons, Overall Bending Length: 12, Distance Between Housings: 124, Bed Height: 34", Open Height: 14", Closed Height: 6", Stroke: 8", Throat Depth: 10", Main Motor: 10 HP, Voltage: 220/440, Approximate ...more
60 Ton, Tishken #CO-24-24-60, 4-post cut-off press, 2 -1/2" stroke, air clutch & brake, 1998, #73911
Yoder Machinery Sales | Holland, OH
Category: Cut-off Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: CO-24-24-60
Year: 1998
SERIAL. 21942298, MODEL. CO-24-24-60, YEAR NEW. 1998, CAPACITY. 60 TON, STROKE. 2-1/2", DISTANCE BETWEEN POST HOUSING. 30-1/4", DISTANCE BETWEEN POST. 32" X 21", SHUT HEIGHT. 9 TO 10", MAXIMUM WIDTH OF CUT. 18", FLOOR TO DIE ADJ. 32" TP 37", 3 AXIS ADJUSTABLE BASE. YES, AUTOMATIC LUBE. BIJUIR, AIR CLUTCH. YES, AIR ...more
60 Ton, Minster #6-Die-Namic, OBI flywheel press, 4" stroke, 16" Shut Height, 11" throat, air clutch & brake, 5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Minster
Model: 6-DIE-NAMIC
SERIAL. 6-16434MODEL. #6 DIE NAMICCAPACITY. 60 TONSSTROKE. 4"SHUT HEIGHT. 16"RAM ADJUSTMENT (POWER). 2-3/4"BED AREA. 32" X 21"RAM AREA. 24" X 14"BOLSTER SIZE. 32" X 21" X 3"STROKES PER MINUTE. 90THROAT. 11"OPENING THRU BACK. 15"AIR CLUTCH & BRAKE. YESLUBE SYSTEM. YESFLYWHEEL TYPE. YESPALM BUTTONS. DUALAIR COUNTER ...more
110 Ton, Bliss #C-110, OBI Press, 6" stroke, 17" shut height, 4" adjustment, 55 SPM
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
Model: C-110
110 TON BLISS C-110 OBI PRESS, MANUFACTURER - BLISS, MODEL - C-110, S/N - H-66571, TONNAGE - 110 TON, STROKE - 6", SLIDE ADJ. - 4", SHUTHEIGHT - 17", SPM - 55, ELECTRICS - 480 V, 3 PH, 60 CYCLE, 33,000 lbs.
200 Ton, Press Master #HFT-200T, H-frame electric-hydraulic shop press, manually adjustable table
Mohawk Machinery Inc | Cincinnati, OH
Category: H Frame Hydraulic Press Machines
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Press Master
Model: HFT-200T
200 TON PRESS MASTER "H"-FRAME ELECTRIC-HYDRAULIC, SHOP PRESS, Serial No 0406104603, Model HFT-200T, Type 11BX16SX4ROD, Manually Adjustable Table, Some Tooling, CATALOG :, Tonnage Capacity 200 TON, Ram Stroke Travel 16", Bore Diameter 11", Distance Ram to Table, Maximum 30.5", Distance Between Uprights, Length 42" ...more
300 Ton, Heim #S2-300-MS, 10" stroke, 32" Shut Height, 10" adj., 25-50 SPM, Omnilink 5000, 2001
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Heim
Model: S2-300-MS
Year: 2001
MODEL: S2-300 MS, Serial# H-3939 Capacity: 300 Ton Stroke Length: 10” Adjustment: 10” Shut Height: 32” Over Bolster (SDAU) Bolster Sixe: 100” lr x 60” fb x 6” thick Speed: 25 - 50 SPM : Link Omnilink 5000 Control Die Protection Tonnage Monitor 50 HP Motor with AC Frequency Drive ...more
110 Ton, Ermak #CNCAP-8X110, CNC Press Brake, 8' overall, Delem 66W CNC 4-Axis Control, 2009
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Ermak
Model: CNCAP-8X110
Year: 2009
110 Ton X 8’ Press Brake with Delem 66W CNC 4 - Axis Control, Independent Synchronized, Manual Crowning and Full Set of Punch Holders., Tonnage: 10 Tons, Max Lengths: 8’, Approach Speed: 236 IPM, Motor: 15 HP, Voltage: 480 V, Length: 147”, Width: 76”, Height: 111”, INCLUDES: Delem 66W CNC ...more
150 Ton, Tishken #CO-20-4-150, pre-punch & notch press, 2.5 stroke, air clutch, adj. mounting base
D & H Machinery Inc | Toledo, OH
Category: Cut-off Presses
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Tishken
Model: CO-20-4-150
Tishken Cut-A-Matic Press, -Capacity: 150 Ton, -Model: CO-20-4, -4 Post Pre Punch and Notch Press, -Adjustable locating holes in the die for Punches and Notches, -Stroke: 2.5", -Bed Area: 50" x 36", -Open Height: 14", -Post Diameter: 3.5", -30 HP AC Motor, -Air Clutch, -Adjustable Mounting Base, -In Storage: Toledo, OH.
110 Ton, Bliss #C-110, Flywheel OBI Press, w/Air Clutch, 42" x 27" Bed Area, 27.5" x 21" Ram Area, 6" Ram Stroke, 80 SPM, 1967
Naab Sales Corporation | Blaine, MN
Seller: Naab Sales Corporation
Location: Blaine, MN
Mfr: Bliss
Model: C-110
Year: 1967
Here We Have:, Bliss Flywheel Type OBI Press, Model C-110, 110 Ton Capacity, Air Clutch, Make: Bliss, Model: C-110, S/N HP45410 H58202, Year: 1967, 110 Ton Capacity, 6” Stroke Of Ram, 21” Shut Height To Bed (SDAU), 4” Ram Adjustment, 42” x 27” Bed Area, 27.5” x 21” Ram Area ...more
100 Ton, Warco, 14" stroke, 24" Shut Height, 39" x 33" bed, 35 SPM, 5 HP, air clutch & brake, #50287
Yoder Machinery Sales | Holland, OH
Category: Gap Frame Single Crank Press Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Warco
Model: 0100
SERIAL. 55-P-2007, CAPACITY. 100 TON, STROKE OF RAM. 14", RAM ADJUSTMENT. 4", SHUT HEIGHT, SDAU. 24", AREA OF BED. 39" X 30", AREA OF RAM. 24" X 24", BOLSTER (ON BED). 39" X 33" X 1-1/2, BOLSTER (ON RAM). 26" X 24" X 3-3/4", STROKES PER MINUTE. 35, WIDTH OF HOLE THROUGH BACK. 21-1/2", DEPTH OF THROAT. 16", AIR CLUTCH ...more
120 Ton, York #YLAA0120, Air Cooled Chiller, R454B, 460 V., 2024
LEL Critical Equipment | Spartanburg, SC
Category: Chillers
Seller: LEL Critical Equipment
Location: Spartanburg, SC
Mfr: York
Model: YLAA0120
Year: 2024
York 120 Ton York Air Cooled Chiller – 2024 York YLAA0120 The 2024 York YLAA0120 Air-Cooled Chiller is a cutting-edge, energy-efficient cooling solution designed for commercial and industrial applications. Offering a 120-ton cooling capacity, this chiller is perfect for facilities such as office buildings ...more
60 Ton, Minster #P2-60-42, straight side double crank, 3" stroke, 13.5" Shut Height, 250 SPM, 25" x42" bed, Wintress WPC w/ Smart Pac Control, air clutch & brake, 1967
Nidec Press & Automation | Macomb, MI
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Minster
Model: P2-60-42
Year: 1967
Tonnage 60 tons, Stroke 3.00 inches, Shut Height 13.5 inches, SPM 250, Vari Speed (Yes/No) yes, Bed W 25 inches, Bed L 42 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Wintriss, Dimensions 110T x 79W x 54D, Weight 18100 pounds, Wintress WPC with Smart Pac Controls ...more
300 Ton, Pacific #K300-12, hydraulic press brake, 24' overall, 125-1/2" between housing, 12" stroke, 30 HP
Aleco Machinery Sales | Milwaukee, WI
Category: Hydraulic Press Brakes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Pacific
Model: K300-12
Pre Owned Pacific Model K300-12 Hydraulic Press Brake, Capacity 300 TONS, Overall Length of Bed & Ram 24’, Distance Between Housings 10’ 5 1/2”, Stroke 12”, Open Height 22”, Closed Height 10”, Throat Clearance 14”, Width At Top Of Bed 8”, Main Motor Horsepower 30 ...more
Sailor, RZ-500VEW-M5H, robot, 3-Axis, 2008
Arlington Machinery | Lake Zurich, IL
Category: Industrial Robots
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Sailor
Model: RZ-500VEW-M5H
Year: 2008
Used 3 Axis Sailor Robot Model RZ-500VEW-M5H, New In 2008 Transverse Stroke: 1400 mm Main Arm Stroke: 4600 mm Kick Stroke: 830 mm Payload: 15 KG Voltage: 200V Machine Tonnage Range: 350-650 Ton Skidded Dimensions: 125" L x 98" W x 102" H.
300 Ton, Freeman #BP300-7118, Full Head Hydraulic Cutting Press, 9.8 stroke, 2004
Revelation Machinery | Chicago, IL
Category: Die Cutting Press Machines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Freeman
Model: BP300-7118
Year: 2004
Make: Freeman, Model: BP300-7118, Year: 2004, Machine Location: South Carolina, Cutting Force: 300 Tons, Cutting Stroke: 9.8″, Machine Bed: 1800 mm x 3000 mm, Max Daylight: 381 mm, Downstroke Speed: 200 mm/sec, Upstroke Speed: 136.3 mm/sec, Power: 460/60/3, Motor: 20 HP (2 motors), Height: 2731 mm (107.5 in) ...more
JUST ADDED!
180 Ton, U.S. Industrial #US200-8-RSB, hydraulic press brake, 8' overall, 98.42" between housing, 12.5" throat, US Industrial Control, 2007
KD Machinery | Scottsdale, AZ
Category: Hydraulic Press Brakes
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Us Industrial
Model: US200-8-RSB
Year: 2007
Used US Industrial Machinery US200-8 RSB (2007) CNC Press Brake for Sale. This pre-owned US Industrial Machinery CNC press brake is located in The United States. If you have any questions regarding this US Industrial Machinery Press Brake, please feel free to contact us. You may Activate Pricing to view the price of ...more
Skin Packing Machine, Zed #ZNT, 4" max Part Height, 50-110 Tons Trim Pressure, 18 x 24 Size, 220 V, 2003
Revelation Machinery | Chicago, IL
Category: Miscellaneous Packaging Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Zed
Model: SKIN PACKING MACHINE
Year: 2003
Make: Zed, Model: ZNT, Year: 2003, Machine Location: Illinois, Machine type: Skin packing machine, Part height capacity: Up to 4 in, Trim pressure: 50–110 tons, Size (card capacity): 18 x 24 in, Electrical requirements: 220 volts, 3 phase, 60 hz, s:, High-pressure trim (50–110 tons) ensures secure and ...more
JUST ADDED!
100 Ton, Accurpress #710010, Hydraulic Press Brake, 10' overall, 100" between housing, 8" stroke, 14" open, 6" Shut Height, 10" throat, ETS200S Control, 1997
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Accurpress
Model: 710010
Year: 1997
100 Ton X 10’ Hydraulic Press Brake with ETS200S 2 - Axis Control X & Y, (2) Front Swing Stock Support Arms, (2) Manual Backgauge Fingers, Power Brake Die Compensator and Pedestal Control with Extra Foot Pedal., Capacity: 100 Tons, Bed Length: 10’, Bed Height: 34”, Distance Between Frames: ...more
100 Ton, Minster #P2-100-48, straight side double crank press, right hand fluwheel, 2" stroke, 19" Shut Height, air clutch & brake
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Minster
Model: P2-100-48
Our stock number: 115683, 100 TON MINSTER SSDC PRESS, MODEL # P2-100-48, S/N 16522, RH FLYWHEEL, 2" Stroke, 4" Adjustment with Digital Read Out, 19" Shut Height on Bed, 30" x 48" Bed, 3" x 31" x 48" Bolster, 16" Window, 100-300 SPM, Motor Drive - Eddy Current, Air Clutch and Brake, Trabon Lube System, Air Counter ...more
60 Ton, Bliss, straight side double crank Power Press, automatic feed, 2" -4" Stroke, 30" L-R x 16" F-B Bed area, 14" Daylight, 60 BPM, 10 HP, 460 V
MachineCo | Montreal, QC
Seller: MachineCo
Location: Montreal, QC
Mfr: Bliss
“This Bliss 60 ton punch press, (Straight Side, Dbl. Crank) about 60 tons, runs beautifully.The plant just moved and changed product lines. The machine has been recently fully guarded and approved for continuous production by OSHA !. (See story below). This press was punching 8 precision holes per blow, about 60 ...more
300 Ton, Heim #300-48-102, straight side double crank press, 12" stroke, 24.2" Shut Height, air clutch & brake, air counter balance, dual palm buttons, 20 HP, #72840
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Heim
Model: 300-48-102
MODEL. #300-48-102, CAPACITY. 300 TON, STROKE OF SLIDE. 12", POWER SLIDE ADJUSTMENT. 6", SHUT HEIGHT, SDAU. 24-1/4", AREA OF BED. 102" X 48", AREA OF RAM T SLOTTED RAM. 102" X 48", WINDOWS. 26" WIDE, BOLSTER. 102" X 48" X 6-1/4", STROKES PER MINUTE. 18, AIR CLUTCH & BRAKE. YES, AIR COUNTER BALANCE. YES, FLOOR ...more
150 Ton, Minster Hevi-Stamper #E2-150-42-30, straight side double crank, 8" stroke, 31.5" Shut Height, 6" adj., 60 SPM, 42" x30" bed, Wintress Smart Pac 2 die protection, Allen Bradley PanelView 600, 1982
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Minster
Model: E2-150-42-30
Year: 1982
SERIAL.: 25233, MODEL.: E2-150-42-30, TONAGE.: 150, STROKE.: 8", SHUT HEIGHT.: 31.50", ADJUSTMENT.: 6", STROKES PER MINUTE.: 0 - 60 VARIABLE SPEED, BED SIZE.: 42" L-R X 30" F-B, RAM SIZE.: 42" L-R X 30" F-B, BOLSTER THICKNESS.: 6", BRONZE REPLACEABLE GIBS.: YES, 4-POINT GIBBING.: YES, - MINSTER CONTROLS, - WINTRISS ...more
1500 Ton, Verson #S1-1500-60-48T, SSSC press, 18" stroke, 42" Shut Height, 16" adj., 14 SPM, 60" x48" bed
Toledo Press Industries | Detroit, MI
Seller: Toledo Press Industries
Location: Detroit, MI
Mfr: Verson
Model: S1-1500-60-48T
Model S1-1500-60-48T Tonnage 1500 tons Bed Size 60" x 48", Bed Size: 60" x 48" Model: S1-1500-60-48T Stroke: 18" Shut Height: 42" Adjustment: 16" SPM: 14 Cushion : Model: K2624-9 98.2T @ 200 PSI Cushion Working Stroke 9", Under Power.
JUST ADDED!
150 Ton, Asahi #TP-150, transfer press, 5" stroke, 20.7'Shut Height, 14 stations, 60 HP, 25-60 SPM, 2002
Perfection Global | Elk Grove Village, IL
Category: Eyelet Transfer Press Machines
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Asahi
Model: TP-150
Year: 2002
150 Ton Asahi TP-150, 5" Stroke, 25-60 SPM, 20.7" Shut Height, 60 HP, (14) Stations, 4.1" Station Pitch, 2002.
60 Ton, Wysong #THS60-96, hydraulic press brake, 8' overall, 78" between housing, 6" stroke, 7.5 HP, 1997
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wysong
Model: THS60-96
Year: 1997
SERIAL. TH8-101, MODEL. THS 60-96, YEAR. 1997, CAPACITY. 60 TONS, OVERALL LENGTH OF BED & RAM. 96", DISTANCE BETWEEN HOUSING. 78", STROKE. 6", ADJUSTMENT. 9", MAX DIE SPACE. 15", THROAT. 6", RAM SPEED APPROACH. 300 IPM, RAM SPEED PRESS. 20 IPM, RAM SPEED RETURN. 225 IPM, DUAL PLAM BUTTONS. YES, 1 SHOT LUBE. YES ...more
60 Ton, Federal #60, OBI press, 3" stroke, 12-1/2" Shut Height, air clutch & brake, 5 HP, 1974, #72242
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Federal
Model: 60
Year: 1974
SERIAL. 60-12354, MODEL. 60, YEAR NEW. 1974, CAPACITY. 60 TON, STROKE OF SLIDE. 3", RAM ADJUSTMENT. 2-1/2", SHUT HEIGHT, SDAU. 12-1/2", AREA OF BED. 32" X 21", AREA OF RAM. 28" X 9, DEPTH OF THROAT. 11-1/2", STROKES PER MINUTE. 90, THICKNESS OF BOLSTER. 2-1/2", AIR CLUTCH & BRAKE. YES, AIR COUNTERBALANCE. YES ...more
140 Ton, Wysong #THS140-144, CNC hydraulic press brake, 12' overall, Automec CNC99 Control, 1999
Mullin Machinery | Farmingdale, NJ
Category: CNC Press Brakes
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Wysong
Model: THS140-144
Year: 1999
Product Wysong Hydraulic Press Brake, Model THS140-144, Serial# TH9-103, New 7/1999, Bed Length- 144″, Tons- 140, Stroke- 8″, Bending Speed- 20 IPM, Return Speed- 200 IPM, a Automec CNC99 Control-2Axis- Backgauge and Ram, A die rail is not in the pictures but I have a new one on order., ***ALL ORIGINAL ...more
60 Ton, Nugier #H60-7, H-frame pneumatic shop press, 7" stroke, 42" x10" bed area
Yoder Machinery Sales | Holland, OH
Category: Pneumatic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Nugier
Model: H60-7
SERIAL. 1453044, MODEL. H60-7, CAPACITY. 60TON, STROKE.7", RAM DIAMETER. 3-1/4", RAM SPEED. 5.3" PER MINUTE, AREA OF BED. 42" X 10", DISTANCE BETWEEN UPRIGHTS. 40", DISTANCE BETWEEN BED FRAME. 8", TABLE TRAVEL. 40", TABLE ADJUSTMENT HOLES. 6", HEAD MOVEMENT LEFT TO RIGHT. 26", PNEMATIC OPERATION. YES.
120 Ton, 8 oz., Van Dorn #120-HT-8F, horizontal injection molding machine, 17" x17" tie bar spacing, 19" DL, 20 HP, Pathfinder 2500 Control, 1994
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 120-HT-8F
Year: 1994
1994 Used 120 Ton Van Dorn 120-HT-8F Injection Molding Machine available. s include a 120-ton capacity, 8 oz shot size, and Pathfinder 2500 controls. Platen area is 25"x24" with a 19" daylight opening., Capacity: 120 Ton, Shot Size: 8 oz., Platen Area: 25"x24", Tie Bar Spacing: 17"x17", Daylight Opening: 19" ...more
120 Ton, 8 oz., Van Dorn #120-HT-8F, horizontal injection molding machine, 25" x24" tie bar spacing, 19" DL, 20 HP, Pathfinder 2500 Control, 1995
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Screw Type Injection Molding Machine
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Van Dorn
Model: 120-HT-8F
Year: 1995
For sale: 1995 Used Van Dorn 120-HT-8F Injection Molding Machine. include 120 Ton capacity, 8 oz shot size, and 25"x24" platen area. Pathfinder 2500 controls and a 20 HP motor. Condition: used. Ideal for efficient plastic molding., Capacity: 120 Ton, Shot Size: 8 oz., Platen Area: 25"x24", Tie Bar Spacing: 17"x17" ...more
300 Ton, Minster #E2-300, straight side double crank press, 8" stroke, 26" Shut Height, 6" ram adjustment, 36-72 SPM, 1973
Timco Inc | Columbia, TN
Seller: Timco Inc
Location: Columbia, TN
Mfr: Minster
Model: E2-300
Year: 1973
MINSTER E2-300 SSDC PRESS, S/N 20259, STOCK# 14397T, MDL# E2-300, S/N# 20259, NEW 1973, CAPACITY: 300 TON, STROKE: 8", RAM ADJUSTMENT: 6", SHUT HEIGHT: 26", BED AREA: 60" L-R X 42" F-B, SLIDE AREA: 60" L-R X 42 " F-B T-SLOTTED, T-SLOTED BOLSTER, SPEED: 36-72 SPM, FLOOR TO TOP OF BED 35.5", WINDOWS 32", AIR CUSHION 4" ...more
150 Ton, Dake #18-293, 4-post, hydraulic press, 28" stroke, 36" open, PLC Control, 1980
Machinery Marketing International | Chicago, IL
Category: Hydraulic Presses
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Dake
Model: 18-293
Year: 1980
Dake Model 18-295 150 Ton Four Post Hydraulic Press 28" Stroke 36" Daylight 48"x38" Table, Tonnage: 150, Max Opening: 36", Min Shut Height: 8", Stroke: 28", Bed Size: 48" Wide x 38" Deep, Type: 4 Post Hydraulic Press.
110 Ton, Minster #G1-110, gap frame press, 8" stroke, 24" Shut Height, 6" adj., 42" x27" bed, 40 SPM, air clutch
Yoder Brothers Machinery | Toledo, OH
Category: Gap Frame Single Crank Press Machines
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Minster
Model: G1-110
Tonnage110 tonsStroke8 inchesShut Height24 inchesBed W42 inchesBed L27 inchesSPM40 Air Clutch (Yes/No)yes, 110 TON MINSTER MODEL #G1-110 GAP FRAME PRESS, 8" STROKE: STOCK 21250 SERIAL. G1-110-12513 MODEL. G1-110 GEARED CAPACITY. 110 TON STROKE. 8" ADJUSTMENT. 6" SHUT HEIGHT. 24" SPEED. 40 SPM BOLTER. 42" X 27" AIR ...more
100 Ton, Accurpress #710010, hydraulic press brake, 10' overall, 14" open height, 6" closed height, 8" stroke, 10" throat
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Accurpress
Model: 710010
Hyd/Mech hydraulic Tonnage 100 tons Open Height 14 inches Closed Height 6 inches Ram Stroke (Fully Adjustable) 8 inches Throat Depth 10 inches Horsepower 10 Overall Dimensions 11' W x 4 1/2" Deep x 8' Tall (Approx.) Approximate Dimensions 136" x 47" x 84" Weight 12000 pounds, NOTES:, DIE RAIL INCLUDED (NO ...more
60 Ton, Rousselle #6B60, OBI press, 4" stroke, 13-1/2" Shut Height, 3" adj, 18" x 60" bed, (2 available)
Bass Machinery LLC | Toledo, OH
Seller: Bass Machinery LLC
Location: Toledo, OH
Mfr: Rousselle
Model: 6B60
60 Ton ROUSSELLE Model 6B60 Double Crank Gap Frame Press, Capacity: 60 Ton, Stroke: 4", Shut Height: 13-1/2", Adjustment: 3", Bed: 18" x 60", Ram: 16" x 48", Bolster: 1-7/8" Thick, 1/2" Tee-Slotted and Drilled/Tapped, Ram Plate, Full Size: 1-3/8" Thick, (6) L-R T-Slots, Strokes Per Minute: 50, Air Clutch and Brake ...more
100 Ton, Minster #S1-100, SSSC press, 7" stroke, 18.5" Shut Height, 21" x 24" bed, 80 SPM, air clutch, 1965
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Minster
Model: S1-100
Year: 1965
, AGE: 1965, CAPACITY. 100 TON, STROKE. 7", SHUT HEIGHT. 19.5", BED AREA. 21" LR x 24" FB, RAM AREA. 23" LR x 18" FB, BOLSTER. 20" LR x 24" FB x 5" THICK, SIDE FRAME OPENING. 21" LR x 16" H (WINDOWS), WIDTH BET. UPRIGHTS. 26.5", SPEED. 40-80 SPM, AIR CLUTCH, GEARING SBG, VAN EPPS PARTS FEEDER, AIR COUNTERBALANCES ...more
300 Ton, Minster #E2-300-96, straight side double crank, 12" stroke, 30" Shut Height, 96" x 48" Bed, 60 SPM, air clutch, 1995
Nidec Press & Automation | Macomb, MI
Seller: Nidec Press & Automation
Location: Macomb, MI
Mfr: Minster
Model: E2-300-96
Year: 1995
SPM 60, Tonnage 300 tons, Stroke 12 inches, Shut Height 30 inches, Vari Speed (Yes/No) yes, Bed W 48 inches, Bed L 96 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, Press :, · 300 U.S. Tons Capacity (2669 kN), · 12.00 in. Stroke (305 mm), · 6.00 in. Slide Adjustment (152 mm) ...more
190 Ton, Accurpress #519010, press brake, 4-Axis, Beckhoff CX5020 Control, 10' overall, 2018
National Machinery Exchange | Newark, NJ
Category: Hydraulic Press Brakes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Accurpress
Model: 519010
Year: 2018
190 TON ACCURPRESS MDL. #519010 PRESS BRAKE, NEW 2018, MANUFACTURER - ACCURPRESS, MODEL NUMBER - 519010, SERIAL NUMBER - 12893, YEAR - 2018, TONNAGE - 190, BED LENGTH - 10', VOLTAGE - 460, CONTROL VOLTAGE - 24, HYDRAULIC OIL PRESSURE - 4450, BACKGUAGE - VISION P10/R/Z, NUMBER OF AXIS - 4, CONTROL - BECKHOFF ...more
60 Ton, Rousselle #6, OBI punch press, 3" stroke, 12-1/2" Shut Height, air clutch & brake, 110 SPM
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rousselle
Model: 6
SERIAL.16267, MODEL. 6, CAPACITY. 60 TON, STROKE OF SLIDE. 3", ADJUSTMENT. 3 1/2", SHUT HEIGHT, SDAU. 12-1/2", AREA OF BED. 30" X 18", AREA OF SLIDE. 12" X 8 1/2", WIDTH OF HOLE THROUGH BACK. 16", DEPTH OF THROAT. 10", BOLSTER. 30" X 18" X 2", DUAL PALM BUTTONS, STROKES PER MINUTE. 110, AIR CLUTCH & AIR BRAKE. YES.
140 Ton, Wysong #THS140-144, hydraulic press brake, 12' overall, 8" stroke, 17" Shut Height, 9" adj., 30 HP, Automec Autogauge XNX 99
Yoder Brothers Machinery | Toledo, OH
Category: Hydraulic Press Brakes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Wysong
Model: THS140-144
140 TON X 12' WYSONG MODEL #THS140-144 HYDRAULIC PRESS BRAKE: STOCK #18665 SERIAL. TH9-100 MODEL. THS140-144 CAPACITY. 140 TON LENGTH OF BED & RAM. 12' STROKE. 8" ADJUSTMENT. 9" SHUT HEIGHT. 17" BACKGAUGE CONTROL. AUTOMEC AUTOGAUGE XNX 99 MOTOR. 30 HP.
110 Ton, Edwards #HAT9000, shop press, 12-1/4" stroke, 37-7/16" x 48" table, new
Lenmark Industries | Langley, BC
Category: Hydraulic Presses
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Edwards
Model: HAT9000
SKU: 129359, Model: HAT9000, Condition: New, Tons: 110 ton, Electrical :, Stroke: 12-1/4", Dimensions: 88.00 (H) x 64.00 (W) x 48.00 (L) inches, Additional :, Stock Number: ED9-HAT9000, Minimum Ram Speed (In./Sec):.186, Minimum Return Speed (In./Sec):.220, Model Number: HAT9000, Rating (Tons): 110, Steel Frame ...more
60 Ton, Bliss #C-60, OBI flywheel press, 4" stroke, 14-1/4" Shut Height, air clutch & brake, 5 HP, #75543
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bliss
Model: C-60
SERIAL. HP39030, MODEL. C-60, CAPACITY. 60 TON, STROKE. 4", SHUT HEIGHT. 14-1/4" OVER BED, ADJUSTMENT. 3", BED SIZE. 32" RL X 21" FB, RAM SIZE. 17" RL X 11" FB, THROAT DEPTH. 11", OPENING THROUGH BACK. 14-3/4", STROKES PER MINUTE. 100, AIR CLUTCH & BRAKE. YES, DUAL PALM BUTTONS. YES, SINGLE, INCHING, CONTINUOUS. ...more
150 Ton, Yao Sheng #TUVB-1J0P, hydraulic press, 7" stroke, 20 HP, 30" x26" bed, 2006, #68628 (2 available)
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yao Sheng
Model: TUVB-1J0P
Year: 2006
MODEL. TUVB-1J0P, YEAR. 2006, CAPACITY. 150 TON, STROKE. 7" EST, RAM. 17" X 16", AREA OF BED. 30" X 26", BOLSTER PLATE T SLOTTED. 26" X 26" X 6", OPEN HEIGHT. 18", CLOSED HEIGHT. 11", DUAL PALM BUTTONS. YES, MOTOR. 20 HORSEPOWER.
1500 Ton, Minster #90-1500, knuckle joint press, 12" stroke, 36" Shut Height,.5" adj., 28 SPM, 1965
G-2000 | Toledo, OH
Category: Knuckle Joint Press Machines
Seller: G-2000
Location: Toledo, OH
Mfr: Minster
Model: 90-1500
Year: 1965
MODEL.: 90-1500 Knuckle Joint Press SERIAL #.: 90-1500-14801 TONNAGE.: 1500 Tons BOLSTER AREA.: 54" x 48" SLIDE STROKE.: 12" SHUT HEIGHT.: 36" SDAU ADJUSTMENT.: 1/2" SPM.: 28, RAM.: T-SLOT, BOLSTER.: DRILLED & TAPPED, Machine Type.Presses, Knuckle Joint Manufacturer.MINSTER Model.K-1500-D Year.1965 Condition.Used ...more
110 Ton, 5.6 oz., JSW #J110EII, horizontal plastic injection molder, 29.53" daylight, 16.14" x 16.14" tie bar spacing, 2000
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Jsw
Model: J110EII
Year: 2000
, 2000 110 Ton JSW J110EII, Shot size: 5.6 Oz, Screw diameter: 40 mm, Tie bar spacing: 16.14" x 16.14", Platen size: 24.02" x 24.02", Max Open daylight: 29.53", Imperial Metric Tonnage 110 T 99.79 t Shot Size 5.6 oz 158.8 g Year 2000 2000.
110 Ton, 4.8 oz., Sumitomo #SE100DUZ-C250M, horizontal plastic injection molder, 29.92" daylight, 18.11" x 16.14" tie bar spacing, 2010
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Sumitomo
Model: SE100DUZ-C250M
Year: 2010
, 2010 110 Ton Sumitomo SE100DUZ-C250M, All Electric Injection Molding machine, Shot size: 4.8 Oz, Screw diameter: 36 mm, Tie bar spacing: 18.11" x 16.14", Platen size: 25.59" x 23.62", Max. Open daylight: 29.92", Machine in good running conditions. Under power., Comes with Picker., Imperial Metric Tonnage 110 T 99.79 ...more
1000 Ton, Verson #S4-1000-144-84T, Straight Side Mechanical Stamping Press, 144" x 84" Bed & Ram Size, 20" Stroke, 60" Shut height, 13-26 VSPM, 1978, 1978
S & G Press & Machinery Sales | Shelby Township, MI
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: Verson
Model: S4-1000-144-84T
Year: 1978
Tonnage 1000, Stroke 20 inches, Shut Height 60 inches, Adjustment 14 inches, Bed Size 144" x 84" FB, Ram Area 144" LR x 84" FB, SPM 13-26 VSPM, Preliminary, 1000 ton Verson Metal Stamping Press, Straight Side Double Crank Mechanical, Press Model S4-1000-144-84T, 1000 - ton Capacity, 20" Stroke, 60" Shut Height, 14" ...more
Bollegraaf #HBC110, 72" horizontal automatic tie baler, 1600 x 1100mm hopper, 1993
Alan Ross Machinery Corp | Zion, IL
Category: Horizontal Balers
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Bollegraaf
Model: HBC110
Year: 1993
1100mm x 1100mm x Variable Length Approx Bale Size, Approximately 47 Tons/Hour Factory Stated Capacity, 1600mm x 1100mm Hopper Size, 55 Ton Pre-press Flap Force, 100 Ton Press Force, 100HP Electric Main Motor / 3HP Wire Tie Motor, Fully Automatic Twistomat Knotter System; 5 Wires Vertically, New 1993 : Approximately ...more
110 Ton, 4.8 oz., Sumitomo #SE100DUZ-C250M, horizontal plastic injection molder, 29.92" daylight, 18.11" x 16.14" tie bar spacing, 2012
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Sumitomo
Model: SE100DUZ-C250M
Year: 2012
, 2012 110 Ton Sumitomo SE100DUZ-C250M, All Electric Injection Molding machine, Shot size: 4.8 Oz, Screw diameter: 36 mm, Tie bar spacing: 18.11" x 16.14", Platen size: 25.59" x 23.62", Max. Open daylight: 29.92", Machine in good running conditions. Under power., Comes with Picker., Imperial Metric Tonnage 110 T 99.79 ...more
200 Ton, Odin #WE67K, Hydraulic Press Brake, 122" Between Uprights, 8" Stroke, 1' Throat depth, 17" Daylight, 20 HP, 2009
Machine Tool Bids | Chicago, IL
Category: CNC Press Brakes
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Odin
Model: WE67K
Year: 2009
Used 2009 Odin WE67K. Machine Tool Bids offers plenty of Hydraulic Press Brakes and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Odin WE67K or any of our machines., MACHINE, Distance between Uprights: 122", Stroke: 8", Max Daylight: 17", Throat Depth: ...more
22 Stand, Tishken #24HW S3-1/2, Roll Forming Line, 3-1/2' ' spindle diameter, 20" roll space, 14" horizontal center, 9" vertical center
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tishken
Model: 24HW
22 STAND ON 24 STAND BASE X 3-1/2" ROLL FORMING LINE, CONSISTING OF:, TISHKEN MODEL 24HW S3-1/2 ROLL FORMING LINE, Line Direction. Left to Right, # of Stands. 22 Stands on a 24 Stand B, Spindle Diameter. 3-1/2", Roll Space. 20", Horizontal Centers. 14", Vertical Centers. 7-1/2" to 9", Main Motor Drive. 75 HP, 500 ...more
1600 Ton, Danly #SE4-1600-72-32, Tandem Press Line, 26" stroke, 16" adj, 48" Shut Height, 12 SPM, 150 HP @ 1200 RPM, Omnilink II 806 Control
VX Machinery | Sylvania, OH
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Danly
Model: SE4-1600-72-32
, Manufacturer: Danly, Type: 4 Point Straight Side Press, Number Of Presses: (2) Available, Configuration: Side By Side Parts Fed Via Robots & Through Press Windows, Tonnage: 1600 Ton, Stroke: 26”, Slide Adjustment: 16”, Shut Height: 48”, Bed Area: 132” x 72”, Slide Area: 132” x ...more
60 Ton, Bliss #C-60, OBI press, 4" stroke, 13.75" Shut Height, 11" throat, 3" adjustment, air brake
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bliss
Model: C-60
SERIAL. HP53318/69984, MODEL. C60, CAPACITY. 60 TON, NEW. 19, STROKE. 4", ADJUSTMENT. 3", SHUT HEIGHT. 13.75", BED DIMENSIONS. 32" X 21", RAM SIZE. 17" X 12", THROAT DEPTH. 11", OPENING THROUGH BACK. 15", SPEED. 90 SPM, AIR BRAKE. YES, DUAL PALM BUTTON. YES, AUTO LUBE SYSTEM. YES, MOTOR. 5 HP.
200 Ton, Standard #AB200-12, hydraulic brake press, 12' overall, 125" between housing, S/N 1290155
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Standard
Model: AB200-12
Year: 1990
Tonnage 200 tons Hyd/Mech hydraulic Punching 133 BH (Distance Between Housings) 10' 5" Bed/Ram Length 12 feet Below Grade no Weight 33000 pounds Bed Height 38 inches Bed Width 5 inches Overall Height 115 inches Throat Depth 12.5 inches Ram Stroke (Fully Adjustable) 6 inches Open Height 13 inches Closed Height 7 ...more
JUST ADDED!
150 Ton, Wabash #DAV-150H-15-BPX, shuttle press, 22 stroke, 12" cylinder, 15" x 15" electrically heated platens, Allen Bradley PLC
Gomaplast Machinery Inc | Wooster, OH
Category: Molding Compression Hydraulic Presses
Seller: Gomaplast Machinery Inc
Location: Wooster, OH
Mfr: Wabash
Model: DAV-150H-15-BPX
Model Vantage # DAV-150H-15-BPX Serial # 9945 15”x15” electrically heated platens 150 Ton 12″ ø cylinder 22″ stroke 10 hp hydraulics operator controls with Allen Bradley PLC, temperature controllers, etc 460V/3PH/60HZ overall dimensions: ?″ l-r x ?″ f-b x ?″ H (15,000 ...more
200 Ton, Graham, Best #C200-12, Press Brake, 12' overall, 126" between housing, 18" Shut Height, 4" adj, 8" throat, 15 HP, 4" x 12' bed, 1985
Revelation Machinery | Chicago, IL
Category: CNC Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Graham
Model: C200-12
Year: 1985
Make: Graham Best, Model: C200-12, Year: 1985, Machine Location: Texas, Tonnage: 200 Tons, Bed Length: 12′, Distance Between Housings: Approx. 120″ – 126″, Shut Height: 14″ – 18″ (without ram adjustment), Ram Adjustment: 3″ – 4″, Throat Depth: 8″ ...more
500 Ton, 15.87 oz., Victory #1060H/210W/500-Combi-US, horizontal two shot injection molder, 70.07" daylight, 2023
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Victory
Model: 1060H/210W/500-COMBI-US
Year: 2023
, 2023 500 Ton Engel Victory 1060H/210W/500 combi US, Two shot Injection molding machine., Shot size main barrel: 15.87 oz, Screw diameter: 50 mm, Shot size upper barrel: 2.64 oz, Screw diameter: 25 mm, Tie bar spacing: Tiebarless, Platen size: 59.05" x 50.59", Max. Open daylight: 70.07", Hours: less than 2,000. ...more
JUST ADDED!
120 Ton, Durma #HAP-37120, hydraulic press brake, 12' overall, 122.05" between housing, 6.1" stroke, 13.78" throat, 2-Axis Back Gauge, 575 V., 2004
KD Machinery | Scottsdale, AZ
Category: Hydraulic Press Brakes
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Durma
Model: HAP 37120
Year: 2004
Used Durma HAP 37120 (2004) CNC Press Brake for Sale. This pre-owned Durma CNC press brake is located in The United States. If you have any questions regarding this Durma Press Brake, please feel free to contact us. You may Activate Pricing to view the price of this CNC Machine, or request a quote by clicking on the ...more
1000 Ton, National #MaxiPress, Cieco PLS Plus controls, 10" stroke, 32" x 45" bed, 75 SPM, 1979
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: National
Model: MAXIPRESS
Year: 1979
1000 TON NATIONAL MAXI PRESS, 1979, TON 1000 T, BED L-R 32 IN, BED F-B 45 IN, STROKE 10 IN, SPEED 75 SPM, WINDOWS 18 IN, BED AREA: 32" LR X 45" FB, SLIDE AREA: 30" LR X 30" FB, CIECO PLS PLUS CONTROL, PWI TONNAGE MONITOR, DUAL PALM BUTTONS, FOOT PEDAL, TOP AND BOTTOM KNOCK OUTS, NOTE: BOLSTER AND RAM PLATES NOT ...more
500 Ton, Wilson K.r., Hydraulic Press, 28" stroke, 31" x 30" bed
National Machinery Exchange | Newark, NJ
Category: Hydraulic Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wilson K.r.
500 TON K.R. WILSON HYDRAULIC PRESS, MANUFACTURER - K.R. WILSON, TONNAGE - 500 TON, STROKE - 28", BED AREA - 31" X 30", FLOOR TO BED - 36", CYLINDER SIZE - 16", MOTOR - 25 HP GE, 230/460 VAC, 3 PH, 60 HZ, 1170 RPM, PUMP - RACINE MDL# 605000, DIMENSIONS 6'2"L X 3'11"W X 13'4"H, APPROXIMATE WEIGHT 21,400 lbs..
150 Ton, 12.7 oz., Engel #650TL/150US, horizontal injection molding machine, EC100 Control, 2004
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: 650TL/150US
Year: 2004
, New in 2004, 150 Ton ENGEL TL 650/150 US:, Shot size: 12.7 Oz, Platen Size: 33.46" x 27.56", Max. Open daylight: 33.46", Control: EC100, Hour meter: 1,123, Machine is in good running conditions. Under power., Imperial Metric Tonnage 150 T 136.078 t Shot Size 12.7 oz 360 g Year 2004 2004.
1000 Ton, 165 oz., Engel #Duo-11050/1000WP, 55.1" x 45.27" tie bar spacing, 2005
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Engel
Model: DUO-11050/1000WP
Year: 2005
, 2005 1000 Ton Engel DUO 11050/1000 WP (Wide Platen):, Shot size: 165 Oz, Tie bar spacing: 55.1" x 45.27", Platen size: 78.7" x 72", Hour meter reads: 7,962, Machine is under power and in good running conditions., Imperial Metric Tonnage 1,000 T 907.186 t Shot Size 165 oz 4,677.7 g Year 2005 2005.
1000 Ton, Verson #SE4-900-4572-2438, 180" x 96" Bed, 37" stroke, 55" Shut Height, 8-16 SPM, Rolling bolsters, (5 available)
Ball Bros Machinery Ltd | Cambridge, ON
Seller: Ball Bros Machinery Ltd
Location: Cambridge, ON
Mfr: Verson
Model: SE4-900-4572-2438
Model SE4-900-4572-2438, Capacity – 1000 US Tons, Bed: 180” x 96”, Stroke: 37”, Strokes per minute: 8-16, Shut height: 55”, Adjustment: 30”, Cushions (120 tons), Rolling bolsters (through columns).
JUST ADDED!
100 Ton, Primeline Comeq #100-8, CNC hydraulic press brake, 8' overall, 85" between housing, 13.77" throat, Cybelec DNC 880S CNC, 2-Axis Back Gauge
KD Machinery | Scottsdale, AZ
Category: CNC Press Brakes
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Primeline Comeq
Model: 100-8
Used Primeline Comeq 100-8 CNC Press Brake for Sale. This pre-owned Primeline CNC press brake is located in The United States. If you have any questions regarding this Primeline Press Brake, please feel free to contact us. You may Activate Pricing to view the price of this CNC Machine, or request a quote by clicking ...more
100 Ton, Wysong #MTH100-120, Hydraulic Press Brake, 10' overall, 8" stroke, 7" throat, 1998
Revelation Machinery | Chicago, IL
Category: Hydraulic Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Wysong
Model: MTH100-120
Year: 1998
Make: Wysong, Model: MTH100-120, Year: 1998, Machine Location: Washington, Capacity: 100 Tons, Bending Length: 120”, DBH: 102”, Open Height: 17”, Shut Height: 9”, Stroke: 8”, Throat: 7”, Rapid Advance Speed: 300 IPM, Press Speed: 20 IPM, Return Speed: 225 IPM, Approx. Shipping ...more
1000 Ton, Bliss, knuckle joint press
National Machinery Exchange | Newark, NJ
Category: Knuckle Joint Press Machines
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Bliss
1000 TON BLISS #27 KNUCKLE JOINT PRESS, MANUFACTURER - BLISS, MODEL NUMBER - 27, TONNAGE - 1000 TON, YEAR - 1960, SERIAL NUMBER - CN-3015, STROKE - 2 ", SHUT HEIGHT - 31 ", ADJUSTMENT - ", BED L-R F-B - 24 X 22, STROKES PER MINUTE - 50, AIR CLUTCH - YES, APPROXIMATE DIMENSIONS - 8' 6" X 16' X 9' ...more
60 Ton, Bliss #C60, 4" stroke, 14.25" Shut Height, 3" adj., 32" x21" bed, air clutch & brake, 1968, #154007
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Bliss
Model: C-60
Year: 1968
60 TON BLISS OPEN BACK INCLINABLE PRESSMODEL C-60… S/N H60259… NEW 1968 RATED CAPACITY. 60 TONS… STROKE. 4"… BED AREA.″2" X 21"RAM AREA.(WITH KNOCKOUT). 17" X 12"… ADJUSTMENT.″"… SHUT HEIGHT. 14-1/4"… STROKES PER MINUTE. ...more
1000 Ton, 192.8 oz., UBE #Servomax-1000W, hybrid horizontal plastic injection molder, 60" x50" tie bar spacing, 107.86" daylight, 2015
JYC Machinery | Aventura, FL
Category: Screw Type Injection Molding Machine
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Ube
Model: SERVOMAX-1000W
Year: 2015
, 2015 1000 Ton UBE Servomax 1000W UST, Hybrid (Servo Hydraulic), Shot size: 192.8 oz, Screw diameter: 112 mm, Tie bar spacing: 60" x 50", Platen size: 76.92" x 66.59", Max. Open daylight: 107.86", Hours: 31,000, 2 core pull, 2 air blow, Valve Gates., Ran PP and ABS., Notes: Good overall condition., Imperial Metric ...more
![60/10 Ton, Kone, 36' 0" Span, 40' lift, class C/D, radio, VFD bridge/trolley, 2004, (2 available) [#2398]](https://files.surplusrecord.com/cdn-cgi/image/width=225,format=auto/listphotos/437325.jpg)
60/10 Ton, Kone, 36' 0" Span, 40' lift, class C/D, radio, VFD bridge/trolley, 2004, (2 available) [#2398]
Highland Machinery & Crane | Benton Harbor, MI
Category: Overhead-Bridge Cranes
Seller: Highland Machinery & Crane
Location: Benton Harbor, MI
Mfr: Kone
Year: 2004
Make Kone Capacity 60 / 10 Ton Capacity (Bridge) 60 Ton Capacity (Main Hoist) 60 Ton Capacity (Aux Hoist) 10 Ton Span 36' 0" Available Lift 40' Class Class D 10T; Class C 60T Crane Headroom 78" Wheelbase 55" Bogey, 162" Total Overall End Truck Length 188" Total Year 2004 S/N H0422388 Control Radio Electrical 460/3/60 ...more
150 Ton, Minster #P2-150-54 PieceMaker, straight side double crank press, 23" Shut Height, 4" adj, 54" x 40" bed, 45-90 SPM, air clutch & brake
Southern Fabricating Mchy Sales | Lithia, FL
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Minster
Model: P2-150-54
150 Ton Piece-Maker Geared Straight Side Press with Motor / Electrics / Controls, T-Slotted Bolster, T-Slotted Slide, Air Clutch and Brake, Capacity: 150 Ton, Stroke: 6”, Shut Height On Bed: 23” (SDAU), Slide Adjustment: 4”, Bed Area: 54” L-R x 40” F-B, Speed: 45-90 SPM, Windows: ...more
150 Ton, Verson #150-OBI, 8" stroke, 22" Shut Height, 6" adj., 30" x50" bed, 35 SPM, air clutch & brake, 1970
Rygate, LLC | Clarkston, MI
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Verson
Model: 150-OBI
Year: 1970
150-ton Capacity, 8" Stroke, 22" Shut Height, 6" Motorized Adjustment, 50" LR x 30" FB Bed Area, 34" LR x 24" FB Slide Area, 35 SPM, Overall Height: 13'9" tall.
110 Ton, Amada #RG-100, CNC press brake, 9.8' overall, 100" between housing, 3.9" stroke, 15.75" throat, 14.57" open, 10 HP, NC9EX-11, 4-finger stops, 2003
Manufacturing Solutions | Santa Ana, CA
Category: CNC Press Brakes
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Amada
Model: RG-100
Year: 2003
110 Tons118.2"100"3.9"14.57"15.75"10 HP12 x 6 x 8'H14,500 lbs..
440 Ton, Komatsu #E2G-400U, straight side double crank, 16" stroke, 36" Shut Height, 12" adj., 42" window, 20-40 SPM, 122" x 61" bed, Wintriss Smart Pac Pro Control, air clutch & brake, 1990
Rygate, LLC | Clarkston, MI
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: Komatsu
Model: E2G-400U
Year: 1990
Model Number: E2G-400U, Serial Number: 10026, Capacity: 400 Tons US Tons, Year of Manufacture: 1990, Bed Area: 122” x 61.1”, Slide Area: 122” x 61”, Stroke: 16.1”, Adjustment: 12.2”, Shut Height: 36.2” over bolsterSDAU, Strokes per Minute: 20-40, Bolster: 7.5” thick ...more
200 Ton, Clearing #200-P-701-2-PT, OBI 2 point press, 10" stroke, 21-1/4" Shut Height, 32 SPM, #63747
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Clearing
Model: 200-P-701-2 PT
SERIAL. 55-2022, MODEL. 200-P-701-2 PT, CAPACITY. 200, STROKE. 10", AREA OF BED. 66" X 35", AREA OF T SLOTTED RAM. 56" X 28", RAM ADJUSTMENT (MOTORIZED). 5", SHUT HEIGHT (SDAU). 21-1/4", STROKES PER MINUTE. 32 SPM, BOLSTER T SLOTTED. 66" X 35" 5" THICK, AIR CLUTCH & BRAKE. YES, AIR COUNTER BALANCES. YES, CUSHION. ...more
100 Ton, Energy Mission #HHP-100, H-frame press, 11.8" stroke, 29.5"x29.5"table,new
Bud's Machine Tools | Murray, UT
Category: H Frame Hydraulic Press Machines
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: HHP-100
Overview, Type:Hydraulic H-Frame PressManufacturer:ENERGY MISSIONModel:HHP 100Condition:New - In-StockStock #:1816Status:For Sale, Applications;, Forming of various automobile parts, Various embossing shapes in sheet metal, Straightening of I-beam and plates, Dish end forming, Forming of different shapes in sheets ...more
6" x 6" x 3/8" Mubea #KBL-1100, Ironworker, 110 Ton, 20" throat, 1.25" stroke, 10 HP
Revelation Machinery | Chicago, IL
Category: Ironworkers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Mubea
Model: KBL-1100
Year: 1900
Make: Mubea, Model: KBL-1100, Year: 1900, Machine Location: Virginia, Tonnage: 110 Ton, Angle (L1): 6″, Angle (L2): 6″, Angle (T): 0.375″, Throat: 20″, Stroke: 1.25″, Power: 10 HP, Weight: 10,000 LBS, Note: Unknown Manufactured Year.
100 Ton, Bliss #C100, OBI press, 4" stroke, 16-1/2" Shut Height, 4" Sslide adjustment, 27" x 42" bed, 85 SPM, 1976
G-2000 | Toledo, OH
Seller: G-2000
Location: Toledo, OH
Mfr: Bliss
Model: C100
Year: 1976
, Tonnage Capacity: 100 Ton, Stroke: 4", Shut Height: 16-1/2", Slide Adjustment: 4", Bed Size: 27" F-B x 42" L-R x 2-5/8" Thick, Maximum Air Pressure for Press: 100 PSI, Maximum Air Pressure for Clutch: 40 PSI, Strokes per Minute: 85 SPM, Motor, 220/440/3/60, Die Set, Coolant Tank w/Pump, Approximate Weight: 7' x ...more
Conair #TLA, compressed air, tube loader, up to 700 PPH, control & pickup wand, 115 V.
Absolute Machinery Corp | Worcester, MA
Seller: Absolute Machinery Corp
Location: Worcester, MA
Mfr: Conair
Model: TLA
Model: TLA, Max Injection Mold Machine Size: 800 tons, Max Extruder Size Inches: 2, Recommended Throughput Lb Hr: 700, Max Conveying Distance Feet: 20, Loader Diameter Inches: 4.5, Material Vacuum Line Size Inches: 1.5 OD, Loader Max Temperature Rating F: 180, Voltage: 115V/1PH/60HZ, 1 FLA.
400 Ton, Minster #90-400, knuckle joint press, 5" stroke, 21-3/8" Shut Height, 20 HP, air clutch, #74582
Yoder Machinery Sales | Holland, OH
Category: Knuckle Joint Press Machines
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Minster
Model: 90-400
Year: 2011
SERIAL. 11623, MODEL. 90-400, YEAR. 1958, CAPACITY. 400 TON, STROKE. 5", ADJUSTMENT. 1/2", AREA OF BED. 28" X 20", AREA OF RAM. 18" X 15-1/4", WIDTH BETWEEN UPRIGHTS. 20", BOLSTER THICKNESS. 4", SHUT HEIGHT. 21-3/8", SINGLE, INCHING & CONTINUOUS. YES, STROKES PER MINUTE. 40, AIR CLUTCH. YES, AIR BRAKE. YES, PALM ...more
6" x 6" x 1/2" Sunrise #IW-110SD, hydraulic ironworker, 110 ton, 10 HP, 20" throat, new, in stock
JPS International Inc | Lake Forest, CA
Category: Ironworkers
Seller: JPS International Inc
Location: Lake Forest, CA
Mfr: Sunrise
Model: IW-110SD
EquipmentIronworkerSunrise IW-110SD Hydraulic IronworkerSunrise IW-110SD Hydraulic IronworkerHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionNewQuantityRequest QuoteLoading.NewHave one to sell?Sell NowOverviewType:IronworkerManufacturer:SUNRISEModel:IW-110SDCondition:Build To OrderStock ...more
300 Ton, Heim Maxi #S2-300MS, 10" stroke, 32" Shut Height, 10" adj., 25-50 SPM, Link Omnilink 5000,2001
Universal Press & Machinery (UPM) | Ferndale, MI
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Heim
Model: S2-300MS
Year: 2001
2001 HEIM S2-300 MS, 300 Ton capacity with dual crank press, 100x60 in bed, 10 in stroke, speeds of 25-50 SPM. s Link Omnilink 5000 control, recirculating lubrication, and more. Second bolster not included; GA drawing available., Serial# H-3939, Capacity: 300 Ton, Stroke Length: 10, Adjustment: 10, Shut Height: 32 ...more
6.37" x 6.37" x .625" Mubea #HIW-1000/610, ironworker, 110 ton, 24" throat, 11 HP, 2001
Liberty Machine Works | Preston, ID
Category: Ironworkers
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Mubea
Model: HIW-1000/610
Year: 2001
Nice ironworker ready for use!, Located at our warehouse in Preston, Idaho., We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers., Included are gathered from various sources such as firsthand inspection, owner or operator interviews ...more
Iberpresse #PRA-1-1423, veneer membrane press, 55" x 90" platen, 300 ton, 2001
Ex-Factory | Charlotte, NC
Category: Vacuum Membrane Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Iberpresse
Model: PRA-1-1423
Year: 2001
IBERPRESSE PRA-1-1423 Veneer Membrane press Platen dimensions of 55" x 90" (1,400 x 2,300 mm); bottom platen, same size top platen with a 47" x 82" (1,200 x 2,100 mm) reset for membrane. -- Infeed: Right-to-left through feed, flat power (indexed for charging a load) conveyor, 96" L x 55" W. -- Outfeed: Gravity roller ...more
500 Ton, Pacific #K500-21, hydraulic brake, 21' overall, 197" between housing, 12" stroke, 1972, #63121
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pacific
Model: K500-21
Year: 1972
SERIAL. 5097 RH, MODEL. K500-21, YEAR NEW. 1972, CAPACITY. 500 TON, OVERALL LENGTH OF BED AND RAM. 21', BED WIDTH. 18", DISTANCE BETWEEN HOUSINGS. 16'5", STROKE OF RAM. 12", OPEN HEIGHTS. 22", CLOSED HEIGHT. 10", DEPTH OF THROAT. 36", RAM PRESS SPEED FAST. 55 IPM, RAM PRESS SPEED SLOW. 26 IPM, RAM SPEED ...more
