Buy or Sell Your 600 Ton Presses

Model 5, Capacity: 60 Ton Stroke: 4” Adjustment: 2.5” Bed Size: 29.5” lr x 18.5” fb Ram Size: 16” lr x 10” fb Shut Height: 12.5” Speed: 90 SPM Throat Depth: 10”, Air Clutch, Air Brake.

UNKNOWN 150 Ton H-Frame Hydraulic Press #8050 #2, Capacity: 150 Ton, Length of Stroke: 10", Maximum Opening: 27", Minimum Opening: 6.5", Power: Air Over Hydraulic (100 psi), Air Over Hydraulic System, Adjustable Bed (Manual Adjustment w/ Heavy Pins).

Overall Bed Length: 168: inches, Press Capacity: 200 Tons, Type of Press Force: Hydraulic, Distance Between Housings: 146: inches, Number of CNC Controlled Axis: 2, Stroke Length: 8: inches, Open Height: 17: inches, Throat Depth: 12: inches.

Allied Gator model UA 486 A, All are approximate, Weight: 45,000 lbs, Jaw opening: 48”, Jaw depth: 60”, Throat force: 2,000 ton, Carrier weight: 200,000 plus, This unit is a beast. We sheared 8” round and 12” cast with no problem., Can be set stationary and supported by satellite power and pump.

Tonnage 300, Stroke 8 inches, Shut Height 32 inches, Adjustment 11 inches, Bed Size 84" LR x 48" FB, Ram Area 84" LR x 48"FB, SPM 35-70 VSPM, 300-ton Clearing Niagara Straight Side Press For Sale, Used Progress Die Press Model SE2-300-84-48UH, 300-ton Metric Capacity, 330-ton US Capacity, 8" Stroke, 32" Shut Height On ...more

1500 TON CAPACITY, 12" STROKE, 54" X 48" BED, 28 SPM,.5" ADJUSTMENT, 36" SHUT HEIGHT.

used- 110 ton air-cooled trane chiller, model rtaa. r-22 refrigerant. 460 volt, 60 hz, 3 phase.

Clifton 1P 4-Post Platen Press 100 Ton #6845, Maximum Pressing Capacity: 100 Ton, Stroke: 10", Daylight Opening: 23", Platen Size: 12" x 12", Distance Between Posts: 17" L-R x 10" F-B, Operating Pressure: 125 PSI, Ram Diameter 10", Main Motor: 3 HP, Auto/Manual Modes.

SERIAL. 8799-1000, MODEL. Q279, YEAR. 1968, CAPACITY. 2000 TON, NUMBER OF POSTS. 4, PRESS TYPE. QUINTUS, STROKE. 13", BED SIZE. 24" X 24", (2) SETS OF 2 EACH FOOT PEDALS. YES, (2) LARGE DIALS. 35,000 PHI EA, LEVELING PADS. YES.

CAPACITY. 200 TON STROKE. " SHUT HEIGHT. 16” DISTANCE BETWEEN HOUSING. 18.5” SIZE OF BED & RAM. 15" X 18" RAM BOLSTER THICKNESS. 1.5” BED BOLSTER THICKNESS. 2.5” BED RISER BOLSTER. BED RAMS / CUSHION. YES FRAME CONSTRUCTION. TIE-ROD TOUCH SCREEN CONTROLS. ...more

SERIAL. 20508, MODEL #G2-200-72 FIXED BASE, CAPACITY. 200 TONS, STROKE OF SLIDE. 8, ADJUSTMENT. 8", SHUT HEIGHT. 30", AREA OF BED. 72" X 36", AREA OF RAM. 72" X 36", WIDTH OF HOLE IN BACK. 25", BOLSTER. 72" X 36" X, STROKE PER MINUTE. 0 TO 80, AIR CLUTCH. YES, AIR BRAKE. YES.

SKU: 129327, Model: HAT8050, Condition: New, Tons: 60 ton, Electrical :, Stroke: 12-1/4, Voltage: 230 volts, Phase: 3-phase, Dimensions: 86.00 (H) x 54.00 (W) x 48.00 (L) inches, Additional :, Stock Number: ED9-HAT8050, Minimum Ram Speed (In./Sec):.330, Minimum Return Speed (In./Sec):.456, Model Number: HAT8070 ...more

500 TON CAPACITY, 24" STROKE, 42" DAYLIGHT, 60" X 46" BED, 60" X 46" RAM, 37" x 36" BETWEEN POSTS, T SLOTTED RAM AND BOLSTER, 20" MAIN CYLINDER DIAMETER BORE, 400 GALLON OIL RESIVOIR, 3184 MAX PSI, FLOOR STANDING.

Make: Standard Industrial, Model: AB200-12, Year: 2013, Machine Location: Upon Request, Tonnage: 200 Tons, Overall Length: 12′, Distance Between Housings: 10.5′, Stroke Length: 10″, Open Height: 17″, Closed Height: 7″, Throat Depth: 8″, Motor: 20HP, Machine does not have a back ...more

SERIAL. C-3043, CAPACITY. 100 TON, AREA OF CROSS HEAD. 52" X 12", AREA OF LUG. 42" X 12", ADJUSTABLE OPEN DISTANCES. 32.5", 44.5", 56.5", STROKE OF RAM. 22", DIAMETER OF CYLINDER. 8.5", OVERALL ACROSS WAYS. 42", T SLOTTED CROSS HEAD & LUG. YES, PASS LINE HEIGHT. 26", PALM BUTTON CONTROL. YES, FOOT LEVER CONTROL. ...more

Overview, Type: Presses-OBI Flywheel Manufacturer: 60 NGPHS OBI PUNCH PRESS Model: 60 NGPHS OBI PUNCH PRESS Year: 1999 Stock #: 54987 Status: For Sale, ImperialMetricsize 60 Ton 60 Ton Tonnage 60 T 54.431 t Stroke 2" 50.8 mm Shut Height 14" 355.6 mm Bed W 23" 584.2 mm Bed L 32" 812.8 mm Precision ...more

Used 100 Ton Minster P2-100-48X31 Piece Maker Press for sale. This 1967 straight side double crank press s a 48"x31" bed, 2" stroke, adjustable 20" shut height, and operates at 100-200 SPM. air clutch, brake, and lubrication., Capacity: 100 Ton, Stroke: 2, Adjustment: 4, Shut Height: 20 (SDAU over Bed), Bed Size: 48 ...more

Spec, Tonnage: 150 T, Type: HYD, Overall Length: 10′, Between Housings: 100″, Stroke: 7.8″, # Axis: 4, Year: 2010 Make: LVD Strippit Model: 135/30 Type: 150 Ton x 10′ Hydraulic Press Brake Back Gauge: 4-Axis Distance Between Housings: 100″ Stroke: 7.8″, Brand – LVD STRIPPIT ...more

500 Ton York Air Cooled Chiller - YVAA0500 Model: YVAA0500, Capacity: 500 Tons (1,760 kW) Compressor Type: Scroll, Air-Cooled, Variable-Speed Drive Refrigerant: R-134A, Environmentally Friendly Voltage: 3-phase, 60 Hz, 460V Cooling Capacity: 500 Tons (1,760 kW) Control Panel: Touchscreen, User-Friendly Interface Sound ...more

Tonnage 200, Stroke 8 inches, Shut Height 23.7 inches, Adjustment 4 inches, Bed Size 61" x 37.4", Ram Area 61" x 37.4", SPM 40-100 VSPM, Standard, Used 200-Ton Aida Metal Stamping Press, Model NL2-200 Straight Side Mechanical, 200-ton Capacity (Metric), 220-ton US Capacity, 8" Stroke, 23.7" Shut Height On Bed, 18.7" ...more

SERIAL. 49868, MODEL. E 60, CAPACITY. 60 TON, STROKE. 6", SHUT HEIGHT (SDAU). 18", RAM ADJUSTMENT. 3, AREA OF BED. 32" X 21", AREA OF RAM. 21" X 16", STROKES PER MINUTE. 90, INCHING, SINGLE & CONTINUOUS. YES, AUTO LUBE. YES, AIR CLUTCH. YES, AIR BRAKE. YES.

SERIAL.: H-62877 MODEL.: C-60 TONNAGE.: 60 STROKE.: 4" SHUT-HEIGHT.: 14-1/4" ADJUSTMENT.: 3" SPM.: 90 BED SIZE.: 32" X 21" RAM SIZE.: 17" X 11" BOLSTER THICKNESS.: 3" PALM STATION CONTROLS.: YES, FOOT STATION CONTROLS.: YES, AIR CLUTH - AIR BRAKE, NITROGEN CUSHION BIJUR LUBE SYSTEM FOOT ISOLATION PADS, Machine ...more

MODEL. 6202, CAPACITY. 150 TONS, IAMETER OF RAM. 8", DISTANCE BETWEEN POSTS. 48", LENGTH. 14', HYDRAULIC POWER UNIT. 10 HP.

, 1999 500 Ton Van Dorn 500HP-4300, Shot size: 90 Oz, Tie bar spacing: 36.75 x 32.5, Platen size: 51 x 47, Max. Open daylight: 82.5", Pathfinder 5000 controls, Imperial Metric Tonnage 500 T 453.593 t Shot Size 90 oz 2,551.5 g Year 1999 1999 Control CNC (Pathfinder 5000) CNC (Pathfinder 5000).

Tonnage 300 Ton Distance Between Housings 149" Throat 10" Open Height 20" Backgauge No Safety Curtains No Type Hydraulic Bed Width 8" Horsepower 30 H.P. Voltage 220/440V ~ 3 Phase Pit Required Yes WEIGHT 42,000 Lbs. Dimensions (L x W x H) 176" X 86" X 135" Dimension Of Bed Only 169" X 60" X 9" s ( 2 ) 24” Front ...more

SERIAL. 386180, MODEL. C1006CL, NUMBER OF JACKS. 4, CAPACITY PER JACK. 100 TONS, STROKE. 6-1/4", JACK HEIGHT CLOSED. 14", JACK HEIGHT ECTENDED. 20-1/2", CYLINDER DIAMETER. 4-1/4", PUSH BUTTON. YES, MANUAL VALE CONTROLS. YES, PHASE. 1, VOLTAGE. 110, PORTABLE STORAGE BOX. YES, MOTOR HORSEPOWER. 1-1/8.

Folio: MV204149, WETORI ISS-500, Hydraulic Press, Capacity: 500 Tons, Model: ISS-500, Table: 27-1/2" x 31-1/2", Stroke: 19-11/16", Gap: 27-1/2", Downward Speed: 350 mm/sec, Clamping Speed: 15-30 mm/sec, Upward Speed: 300 mm/sec, Touchscreen Controls, 40-Ton Pulling Force, Motor: 60 HP, Location: Teran, NL, Mexico ...more

Used Pro Refrigeration glycol chiller, model PB150F14R4CL-A-VD, manufactured 2016. Approx. 130150 ton capacity, air-cooled, R404A refrigerant, dual-circuit system with multiple Bitzer compressors and variable drive. 460V / 3PH / 60Hz, MCA 130 amps. Previously used in brewery application., 2016 PRO REFRIGERATION ...more

Make: Cincinnati Milacron, Model: NT550-80, Year: 2001, Machine Location: New York, Capacity: 500 Ton, Shot Size: 72 oz, Tie Bar Spacing: 36.22″ x 36.22″, Platen Size: 50.8″ x 50.8″, Max Daylight: 66.14″, Min /Max Mold Height: 9.84″/31.50″, Clamp Stroke: 34.64″, Control: ...more

Used 100 Ton Toyo Electric Vertical Rotary Injection Molding Machine, Model ET-100VR2, 4.9 Oz, New In 2012 Clamp Force: 100 Ton Screw Diameter: 36 MM Shot Size: 4.9 Oz Min/Max Mold Height: 9.44" x 13.77" Max Mold Size: 22.64" x 17.12" Controller: PLCS-11 S/N: 1576020 Vertical Injection Unit - Currently Removed From ...more

Tonnage 300, Stroke 10 inches, Shut Height 27 inches, Adjustment 10 inches, Bed Size 60" x 42", Ram Area 60" x 42", SPM 25-50 SPM, Standard, Used Bliss Press Model# SC2-300-60-42, Straight Side Mechanical Stamping Press, Mechanical, Air and Lubrication Recondition in Process, 300 ton Capacity, 10" Stroke, 27" Shut ...more

PUNCH # 1 FLANGE, MODEL. F5100 FX6, CAPACITY. 100 TON, STROKE. 2", DEPTH OF THROAT. 6", MAXIMUM HOLE. 1-3/16" IN 7/8" PLATE, MAXIMUM OPENING UNDER PUNCH. 1-9/16", MAXIMUM FLANGE DEPTH. 8-1/2", FACE OF PEDESTAL TO SLUG CENTER. 1-1/8", PUNCH #2 WEBB, MODEL. 550, CAPACITY. 50 TON, STROKE. 1-5/8", DEPTH OF THROAT. 8" ...more

MODEL #: 100 TON C FRAME C 94 SPECIAL, SERIAL #: 19620, 100 TON MAXIMUM CAPACITY, 15" STROKE, 24" DAYLIGHT, 12" DIAMETER RAM, 35" x 23" BED SIZE, 6" DIAMETER SHAFT, 3000 MAXIMUM P.S.I., PALM BUTTONS, LIGHT CURTAINS, 75 HP 230/460, 107" FB x 54"LR x 121" TALL, 17,000 LBS ESTIMATED WEIGHT, GOOD CONDITION.

Used 100 Ton Sanki Hydraulic Spotting Press, model SPD1310-100TD, from 1993. Key include 100T capacity, 51"x39" bed, 38.4" stroke, and 41.2" daylight opening. slide out bolster, wax injection, and light curtains. 480/3/60 voltage., Capacity: 100 Ton, Bed & Ram Area: 51 x 39, Stroke: 38.4, Daylight Opening: 41.2 ...more

SERIAL. 60A-519, REMANUFACTURED YEAR. 1996, STYLE. OBI (OPEN BACK INCLINE), MODEL. 60, CAPACITY. 60 TONS, STROKE LENGTH. 3", SLIDE ADJ. 2.5", SHUT BED HEIGHT OVER BED. 14.68", SLIDE RAM AREA SIZE. 13.25" X 21", BED AREA SIZE. 32" X 21", THROAT DEPTH. 11.5", SPEED. 200 SPM, OPERATING MODES. INCH / SINGLE / AUTO SINGLE ...more

Year of Installation: 1978, Material width: 300 mm to 588 mm, Max Diameter: 2000mm, Thickness: 1.5mm - 5mm, Speed: 450 meters per minute, Winder Block I.D: 600 mm, Coil Weight: 15 ton, Separation force: 500 ton, Max Tension: 4700 kg.

SKU: 122059, Model: 2027, Condition: New, Tooling Style: European, Type: Bottom Die (Die), Length: 31.70 In, Height: 5.12 In, Flame Hardened: Yes, Max. ton/m: 120, Additional :, V= 6.30".

Tonnage 500, Stroke 14 inches, Shut Height 44 inches, Adjustment 12 inches, Bed Size 108" LR x 60" FB, Ram Area 108" LR x 60" FB, SPM 20-50 VSPM, Standard, 500-ton Bliss Straight Side Mechanical Press, Metal Stamping Press Model# SC2-500-108-60, Full Remanufacture in Process - Complete 2025, 14" Stroke, 44" Shut ...more

SERIAL.: 39-3739, MODEL.: K2500, TONNAGE.: 500, STROKE.: 18", SHUT HEIGHT.: 53", ADJUSTMENT.: 10", STROKES PER MINUTE.: 18, BOLSTER THICKESS.: 7, BED SIZE.: 96" X L-R X 72" F-B, RAM SIZE.: 96" X L-R X 72" F-B, WINDOW SIZE.: 24" X 25", MOTOR HP.: 50 HP, MOTOR RPM.: 1200, Machine Type.Presses, Straight Side ...more

Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Capacity:, Tannage: 100 Ton, Bed Length: 144" ...more

SERIAL. 10002, MODEL. OBS60, YEAR NEW. 1984, CAPACITY. 60 TONS, BED AREA. 31.50" X 21-65." X 2.95", RAM. 17-3/4" X 13-1/2", RAM HOLE. 2", STROKE. 4.72", POWER ADJUSTMENT. 2.76", SHUT HEIGHT (SDAU). 11.81", STROKES PER MINUTE. 70, CONTROL. DUAL PALM BUTTONS, INCH/SINGLE/CONTINUOUS. YES, BLACK MAX LIGHT CURTAINS. YES.

Tishken Cut-A-Matic Cutoff Press, -Capacity: 60 Ton, -Model: CO-20-18-60, -Bed Size34" x 23", -Stroke: 2.5", -Open Height 14.5", -Flying Die, -20 HP AC Drive Motor, 1165 RPM, 208-220/440 V, -Air Clutch, -Mounting Base, -Air Cylinder Die Return, -In Storage: Toledo, OH.

Tonnage 300, Stroke 8 inches, Shut Height 32 inches, Adjustment 11 inches, Bed Size 84" LR x 48" FB, Ram Area 84" LR x 48" FB, SPM 35-70, New To S & G Press Inventory:, Used 300-ton Niagara Mechanical Stamping Press, Niagara Press Model SE2-300-84-48 UH, Progressive Die Stamping Press For Sale, Standard, 300-ton ...more

Serial Number. 6SS-28364, Year of Manufacture………………………. 1991, Model Number. OBS-6, Capacity…………………………………….60 Tons, Bed. 32” x 21”, Slide ...more

Folio: MV2161233, CINCINNATI, Hydraulic Press, Capacity: 110 Tons, Table: 27” x 42”, Stroke: 10”, Span: 17”, Motor: 25 HP, Year: 1995, Serial Number: 49024, Weight: 9.8 Tons, Location: Ramos Arizpe, Coahuila, Mexico, CINCINNATI HYDRAULIC PRESS FOR SALE, 110 TON HYDRAULIC PRESS MACHINE, USED ...more

(100 TONS AT 1000 PSI). FOUR 8" BORE CYLINDERS. APPROX. DAYLIGHT OF 52" WITH APPROX. STROKE OF 36". TWO 4" BORE PUSH-BACK CYLINDERS. 34" OPERATOR HEIGHT. OVERALL HEIGHT IS 14' (10' WITH CYLINDERS REMOVED FOR SHIPPING). RACK AND PINION GUIDING. (ITEM #59).

Used 150 Ton Bliss Model S2-150-48-30 Straight Side Double Crank Press by BLISS. s include 150T capacity, 48"x30" bed, 4" stroke, 8" adjustment, 20" shut height, and 35 SPM. Ideal for heavy-duty applications., Capacity: 150 Ton, Stroke: 4", Shut Height: 20", Slide Adjustment: 8", Bed Area: 48"LR x 30"FB, Speed: 35 ...more

SERIAL. 10020, MODEL. OBP60, YEAR NEW. 1987, CAPACITY. 60 TONS, BED AREA. 41.73" X 17.71 X 5.12", RAM.27.57" X 15.74", RAM HOLE., STROKE.2.36", POWER ADJUSTMENT. 2.75", SHUT HEIGHT (SDAU). 11.81", RAM SPEED.30 TO 225 SPM, CONTROL. DUAL PALM BUTTONS, INCH/SINGLE/CONTINUOUS. YES, T SLOTTED RAM & BED. YES, MOTOR ...more

Item 3050 - One (1) Used TMP 18" x 18" press, 150 ton, 6" daylight between platens, 6" stroke, (1) electric platen, self contained hydraulic unit, controls.