Buy or Sell Your 600 Ton Presses

Tonnage 400, Stroke 10 inches, Shut Height 35 inches, Adjustment 12 inches, Bed Size 108" LR x 54" FB, Ram Area 108" LR x 54" FB, SPM 20-60 VSPM, Standard, Used Blow Straight Side Mechanical Press, 400-ton Blow Model # SC2-400-108-54, Serial Number SDG-400-443-97, 400-ton Capacity @.5" off Bottom, 10" Stroke, 35" Shut ...more

Manufacturer. Clearing, Model. H-2000-54, Tonnage. 2000, Stroke. 24", Shut Height. 46", Daylight. 64", Bed Area. 54" x 56", Machine Type.Presses, Hydraulic Manufacturer.CLEARING Model.H-2000-54 Year.N/A Condition.Used.

400 Ton Williams and White press – bed 68″ left to right – 54″ Front to back – Double Acting press -up to 40″ Draw Die spacing – 24″ Stroke – 38″ Daylight – up to 1200 IPM approach speed – Pressing speed 10-100 IPM – Fast open to 1000 IPM ...more

SERIAL. H50953/HP370841, MODEL. C60, CAPACITY. 60 TON, STROKE OF SLIDE. 3", AREA OF BED. 32" X 21", AREA OF RAM. 17" X 12", BOLSTERS. 32" X 21" X 3", ADJUSTMENT. 3", STROKES PER MINUTE. 100, AIR CLUTCH. YES, AIR BRAKE. YES, DUAL THUMB SLOTS. YES, MOTOR. 5 HORSEPOWER.

MODEL.: S2-800-90-54, TONNAGE.: 800, STROKE.: 24", SHUT-HEIGHT.: 38", ADJUSTMENT.: 12", STROKES PER MINUTE.: 20-24, BED SIZE.: 90" L-R X 54" F-B, RAM SIZE.: 90" L-R X 54" F-B, BOLSTER THICKNESS.: 8.5", T SLOTTED RAM.: YES, T SLOTTED BOLSTER.: YES, AIR CUSHION.: YES, Machine Type.Presses, Straight Side, Double Crank ...more

Model E2 Tonnage 300 tons Bed Size 84" x 44", Model: E2, Bed: 84’’ x 44’’, SPM: 0-225, Stroke: 1.5, Slide Adj: 5’’, Shut Height: 25.75’’, Lubrication system, Littell feedline, Capacity: 10,000# capacity, Diameter width: 16-20-30,.040’’ thick x ...more

SERIAL. 705, CAPACITY. 500 TON, OPEN. 8", JAW TRAVEL. 3", CLOSED. 5", CENTER OF PIN TO CENTER OF JAW. 12-1/2", JAW TRAVEL SPEED (FROM EXTREME POSITIONS):, CLOSING TIME. 14 SECONDS, OPENING TIME. 14 SECONDS, MOTOR. 7 1/2 HP.

Make: Niagara, Model: HD500-10-14, Year: 1980, Machine Location: Upon Request, Capacity: 500 Tons, Overall Length: 10.5′, Stroke: 12″, Closed Height: 10″, Open Height: 22″, Distance below floor: 34″, Machine Dimensions: 14.5″ L, 8.5′ W, 11.5′ H, Machine Weight: 81,300lbs.

Forming Capacity: 100 TonPunching Capacity: 66 TonDistance Between Housings: 6'5"Stroke: 6"Throat Depth: 6"Daylight: 13"Shut Height: 7"Bed & Ram Length: 8', Manual BackgaugeFull Tonnage Throughout Stroke.

Tonnage 100 Ton Distance Between Housings 124" Throat 12.5" Open Height 16.3" Back Gauge Travel 24" Ram Speeds Hydraulic Tank Capacity 97 Gallon Horsepower 15 H.P. Voltage Request On Order Dimensions (L x W x H) 179" x 64" x 101" WEIGHT 23,148 Lbs. S: CNC 2-Axis Color Graphic Control Sick Model 4000 Light Curtain ...more

300 Ton LMG (Lawton Machinery Group), 30" x 30" platens, one electrically heated platen press, one water cooled press, both presses have own power unit for full tonnage, 6 opening, 10" stroke, 7" daylight each opening, NEW in 2016, #89556., 2016 LMG 300 Ton, Tonnage. 300 T, Heating Element. Electric, # of Openings. 6 ...more

Rating in Tons 1200 Die Grip in Tons 606 HDR SL Stroke 18" Strokes/Min 27 Die Opening 8" Stock Gather 11" Hold On 5" Die Height 36" Die Thickness 11" Die Seat Length 26" Tool & Die Space Max 57" Eccentric Pin Diameter 16 1/2" Journal Diameter 14" Flywheel Diameter 76" Total Energy (ft/Lbs) 375,090 Clutch Torque ...more

Used 1979 National 1000 Maxi Pres Forging Press with 1000-ton capacity, 10" stroke, and 75 spm speed. s Cieco PLS Plus control, PWI tonnage monitor, dual palm buttons, foot pedal, and knock outs. Bolster and ram plates not included., Capacity: 1000 Ton, Stroke: 10", Bed Area: 32" lr x 45" fb, Slide Area: 30" lr x 30" ...more

Tonnage 300, Stroke 12 inches, Shut Height 30 inches, Adjustment 6 inches, Bed Size 84" LR x 48" FB, Ram Area 84" LR x 48" FB, SPM 40-80 VSPM, Standard Used 300-ton Minster Straight Side Mechanical Stamping Press Model E2-300-84-48 Hevi-Stamper Serial Number/ 24499 300 ton Capacity 12" Stroke 30" Shut Height on Bed 6" ...more

Tonnage 60, Stroke 4.72 inches, Shut Height 14.2 inches, Adjustment 2.76 inches, Bed Size 35.4" x 21.7", Ram Area 19.7" x 15.7", SPM 60-120, Standard, 60 TON KOMATSU Model OBS-60, MECHANICAL METAL STAMPING GAP FRAME, 60 Metric Ton Capacity, 66 Short Ton Capacity, 4.72" Stroke, 16.93" Shut Height on Bed, 11.81" Die ...more

Tonnage 100 tons, Stroke 2.00 inches, Shut Height 22 inches, SPM 160, Vari Speed (Yes/No) yes, Bed W 31 inches, Bed L 48 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Minster, Dimensions 132T x 97W x 60D, Weight 33000 pounds, Air Clutch and Brake Recirculating ...more

SERIAL. 18227, MODEL. 700, CAPACITY. 700 TON, STROKE. 8 inches, SHUTHEIGHT. 22", STROKE. 8", STROKES PER MINUTE. 90, AREA OF BED. 24" LR x 39" FB, RAM AREA. 21" x 21", WINDOW. 14-1/2", FLOOR STANDING. YES, KNOCKS OUTS. BOTTOM, AIR CLUTCH. YES, AIR BRAKE. YES.

Tonnage 100 pounds, Stroke 2.00 inches, Shut Height 21.5 inches, SPM 150, Vari Speed (Yes/No) yes, Bed W 31 inches, Bed L 48 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Minster, Dimensions 151T x 163W x 76D, Weight 33000 pounds, Air Clutch and Brake ...more

SERIAL. 2212, MODEL. S2-200-78-42, YEAR. 1976, CAPACITY. 200 TON, STROKE. 6", SHUT HEIGHT. 20", ADJUSTMENT. 4", BED L-R. 76", BED F-B. 42", WINDOW WIDTH. 22", STROKES PER MINUTE. 28", AIR CLUTCH. YES, AIR COUNTER BALANCE. YES.

60 TON BLISS Mdl# C-60 OBI PRESS BACK GEARED, CAPACITY 60 TON, TYPE OPEN BACK INCLINABLE, STROKE 4", SLIDE ADJUSTMENT 3", BED AREA 31" X 22", SHUT HEIGHT - TO BED 14-1/2", AIR CLUTCH, - New Cieco Press Control - PPC1100R-4, - New Motor Controls, All New Wiring, - Side Guards with Light Curtains.

SERIAL.: H-65461, MODEL.: C-60, TONNAGE.: 60, STROKE.: 4", SHUT-HEIGHT.: 15-3/4", ADJUSTMENT.: 3", STROKES PER MINUTE.: 60,INCH,SINLE,CONTINUOUS, BED SIZE.: 32" L-R X 21" F-B, RAM SIZE.: 17" L-R X 11" F-B, BOLSTER THICKNESS.: 3", PALM BUTTON CONTROLS.: YES, BIJOR LUBE SYSTEM.: YES, Machine Type.Presses, O.B.I, Back ...more

300-ton Capacity, 12" Stroke, 52" Shut Height On Bed, 45" Shut Height Over Bolster, 6" Motorized Adjustment, 96" LR x 54" FB Bed Area, 96" LR x 54" FB Slide Area, 25 SPM.

BLISS 60 TON OBI PRESS, STOCK# 14164J, CAPACITY 60 TON, STROKE 4", SHUT HEIGHT 14.25", RAM ADJ 3", BED 32" X 21", NEW 1989, SPM 90, AIR CLUTCH, AIR BRAKE, AIR COUNTERBALANCE, PALM BUTTONS, 60" LR X 80" FB X 122" T, APPROX WEIGHT 14,000 LBS.

Tonnage 100 tons, Stroke 2.00 inches, Shut Height 22 inches, SPM 160, Vari Speed (Yes/No) yes, Bed W 31 inches, Bed L 48 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Minster, Dimensions 132T x 97W x 60D, Weight 33000 pounds, Air Clutch and Brake Recirculating ...more

, TONNAGE.: 5000, STROKE.: 60", DAYLIGHT.: 81", CLOSED HEIGHT.: 21", BED SIZE.: 105" L-R X 86" F-B, INTERMEDIATE PRESSING.: 1500 TONS, STRIPPING.: 70 TONS, RAPID ADVANCE.: 535 IPM, INT PRESS @ 1500 TONS.: 0-47 IPM, INT PRESS @ 5000 TONS.: 0-14.2 IPM, RETURN SPEED.: 510 IPM, Machine Type.Presses, Hydraulic ...more

Tonnage Capacity: 60 TonStroke Length: 4.7"Max. Stroke Speed: 85 SPMSlide Adjustment: 2.6"Slide Area (L-R x F-B): 19.7" x 15.7"Bolster Area (L-R x F-B): 35.4" x 19.7"Die Height Over Bolster: 11.8", Komatsu SIT IV ControlPress Mounted Dual Palm ButtonsAir CounterbalanceHydraulic Overload ProtectionLinear Glass ...more

SERIAL. 1397, MODEL. S1-200-30-36, RATED CAPACITY. 200 TONS, STROKE. 8", SPEED. 40 SPM, BOLSTER AREA. 30" L-R X 36" F-B X 1-7/8" THICK, BED. 30" L-R X 36" F-B, WINDOW. 20" X 24", DOVE TAIL SLOT IN RAM. YES, RAM ADJUSTMENT. MOTORIZED, COUNTER BALANCE. AIR, CLUTCH & BRAKE. AIR, CONTROLS. YES, PRESS MOUNTED, MOTOR. ...more

CAPACITY. 100 TON, DISTANCE BETWEEN STRAIN BARS. 48", STROKE OF RAM. 30", MAXIMUM DISTANCE RAM TO RESISTANCE. 109", HOLE THROUGH RESISTANCE BLOCK. 9-1/2", DIAMETER OF RAM. 10", 3 STAGE PUMP, 10 HORSEPOWER DRIVE MOTOR, NEED NEW PUMP.

Make: Verson, Model: 6B60, Year: 1955, Machine Location: Ohio, Capacity: 150 Tons, Stroke: 6”, Adjustment: 4”, Shut Height: 16”, Power Ram, Available for inspection under power.

Item 3108 - One (1) Used Eemco 42" x 42" press, 1000 ton, 40" daylight between platens, 40" stroke, (2) steam platens.

Tonnage 100 tons, Stroke 4.00 inches, Shut Height 17.00 inches, SPM 200, Vari Speed (Yes/No) yes, Bed W 31 inches, Bed L 48 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Minster, Dimensions 129T x 97W x 60D, Weight 33000 pounds, Air Clutch and Brake Recirculating ...more

Maximum Tonnage Capacity 400 Ton Stroke 14" Shut Height 27" Ram Adjustment 10" SPM 20 - 50 Bed Size 96" X 48" Windows 36.5" Motor HP / Electrics 75 HP Crank (Single/Double) double Air Clutch yes Air Brake yes Air Counterbalances yes Dual Palm Buttons yes, T Slotted Ram And Bolster, Gibs have been redone., 1989, 141" x ...more

Tonnage 100 tons, Stroke 2.00 inches, Shut Height 21.5 inches, SPM 150, Vari Speed (Yes/No) yes, Bed W 31 inches, Bed L 48 inches, Crank (Single/Double) double, Air Clutch (Yes/No) yes, CNC Control yes, Type of CNC Control Minster, Dimensions 151T x 163W x 76D, Weight 33000 pounds, Air Clutch and Brake Recirculating ...more

60 Ton Bliss-C-OBI Asset: 042, Serial Number: H69096, Capacity: 60 Ton, Stroke: 6” 152.4mm, Slid Adjust: 3" 76.2mm, Shut Height: 17.5” 444.5mm, Die Area: F-B 30" x 20" 762mm x 508mm, Slide Area: 17" x 11" 431.8mm x 279.4mm, Floor Space L-R & F-B: 65" x 38" 1,651mm x 965.2mm, Approximate Height Above ...more

ORDER 630, 630 Ton AIDA Knuckle Joint Press, Model K1-6300, s/n 10306-1451, 8.66” stroke, 1.97” ram adjustment, 18.50” shut height over bolster 31.50 x 23.62 Ram and Bolster, Air clutch, Air Brake, Air Counterbalance, Floor standing, Die clamping, NEW 2015..

300 TON WATSON STILLMAN HORIZONTAL WHEEL PRESS, New 1956, 20 HP, 3-Phase, 60 Cycle, AC Motor and Controls, Capacity 300 Tons, Stroke 21", Distance Between Strain Bars 72", Distance Between Housings 158", Yoke Opening 10.5", Yoke Throat 10.5", Yoke Opening Width 24".

300 TON PACIFIC HYDRAULIC PRESS Speeds: Return - 132, 48 Pressing T-Slotted Ram & Bolster (7") 260 Gallon Resevoir Allen Bradley Controls Lite Curtains 28" Windows 40 HP 1800 RPM 460/3/60 Subject to Verification.

Coast Iron Machine Works 6RD Tube Pipe Bender 6" #6360 #1, BENDING CAPACITY:, CARBON STEEL PIPE: 6" X SCH 80, STAINLESS STEEL PIPE: 6" X SCH 40, BENDING FORCE: 100 TONS, BENDING SPINDLE TORQUE: 157,000 FT Lbs., BENDING FORCE: 100 Ton, MAXIMUM BEND RADIUS: 5XD ON MAX CAPACITY, MAXIMUM BEND ANGLE: 180 + 15 SPRINGBACK ...more

SKU: 51437, Condition: Surplus New, Tons: 800 ton, Electrical :, Stroke: 12", Dimensions: 133.00 (H) x 60.00 (W) x 107.00 (L) inches, Additional :, Capacity: 800 Ton, Stroke: 12", Bed Width: 60", Number of Cylinders: 2, Cylinder Diameter: 20", Cylinder Depth: 34.75", Plate Width: 81" ...more

60 Ton Press with Palm Button Control, Twin End Drive, Trabon Lube System, 16” Windows, Air Counterbalances, Air Clutch and Brake., Tonnage: 60, Stroke: 5”, Shut Height: 13”, Adjustment: 5”, Bed Size: 60” X 36”, Ram Size: 60” X 36”, Stroke Speed: 40 SPM, Overall ...more

60 Ton Bliss C- OBI Asset: L045 Capacity: 60 Ton Stroke: 4" Shut Height 6" to Bolster Bed Area: 32" x 21" Slide Area: 12" x 11" Floor Space L-R & F-B: 37" x 68" Approximate Height Above Floor: 9' Approximate Weight: 12,000 lbs. are correct to the best of our knowledge but are subject to correction upon ...more

MODEL: HP2-60, SERIAL #: H65039, 60 TON CAPACITY, 3" STROKE, 3.5" RAM ADJUSTMENT, 15.5" SHUT HEIGHT, 0-180 SPM, 48" x 24" BED AREA, 12.5" WINDOWS, 15" x 48" RAM ADJUSTMENT, PALM BUTTONS, LIGHT CURTAINS, INCH, SINGLE AND CONTINUOUS MODES, AIR COUNTER BALANCES, 3.5" T-SLOTTED BOLSTER, DYNAMATIC DRIVE, GOOD CONDITION.

SERIAL.: P2-100-16511, MODEL.: P2-100-48, TONNAGE.: 100, STROKE.: 4", SHUT-HEIGHT.: 17", ADJUSTMENT.: 4, STROKES PER MINUTE.: 80-160 VARIABLE, CLUTCH AIR PRESSURE.: 60 LBS., BED SIZE.: 48" X 31", T SLOTTED RAM.: YES, T SLOTTED BOLSTER.: YES, MINSTER CLUTCH.: YES, VOLTAGE.: 240, OMNILINK II LCD OPERATOR SYSTEMS ...more

For sale: Used 1975 Minster #6 OBI Flywheel Press. 60-ton capacity, 32"x21" bed, 120 SPM speed, air clutch, and brake. automatic lubrication, light curtains, and dual palm buttons. Ideal for efficient production., Capacity: 60 Ton, Stroke: 6", Adjustment: 2.75" (Motorized), Shut Height: 14" (SDAU over Bed), Bed Area: ...more

60 Ton Bruderer BSTA 60H High Speed Straight Side 4, Pillar Precision Press, 3/4″- 3″ STR, 150-800 SPM Vari, BBV 300/200 Feeder, 60 Ton Bruderer BSTA 60H High Speed Straight Side 4 Pillar Precision Press, 3/4″- 3″ STR, 150-800 SPM Vari, BBV 300/200 Feeder, LISTING, Type Presses, High Speed ...more

, 2008 200 Ton ENGEL e-motion 740/200 T US All Electric:, Shot size: 15.4 Oz, Screw size: 55 mm, Tie bar spacing: 20.48" x 20.48", Platen Size: 30.31" x 30.51", Shut Height (in): Min 9.84 / Max 23.62., Stroke: 18.11 inches., Hours: 46913., Imperial Metric Tonnage 200 T 181.437 t Shot Size 15.4 oz 436.6 g Year 2008 2008.

Serial#5A-2457 Capacity: 60 Ton Stroke: 4” Adjustment: 2.5” Bed Size: 32” lr x 21” fb Ram Size: 14” lr x 10” fb Shut Height: 12.25 Speed: 90 SPM, Air clutch, Air Brake Throat Depth: 11.5”.

Capacity: 200 US Tons, Model Number: SC2-200-96-42, Serial Number: 78229, Bed Area: 96” x 42”, Slide Area: 96” x 42”, Stroke: 8”, Adjustment: 10”, Shut Height: 22” over bolster SDAU, Strokes per Minute: 40-80, Windows: 24” wide approx., Overall Height: 172” floor ...more

, 150-Ton USI Clearing OBI Press, Model.150-P-701, Stroke.6", Shut-Height.21-1/2", Adjustment.5", SPM.35, Machine Type.Presses, O.B.I. Manufacturer.CLEARING Model.150-P-701 Year.N/A Condition.Used.