Buy or Sell Your Circular Cold Saw Machine
AI-ranked results for circular cold saw machine - closest matches first
Cam-Wood #CS-18AAT-16/EM-300, End Matcher w/Optimizing Cutoff Saw, 12" width, 10.5" min. L, 300 FPM feed, (2) 5.5 HP spindle, 1.57" spindle diameter, 2026, new
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-18AAT-16/EM-300
Year: 2026
CAM-WOOD 16' Pusher Type Cutoff Saw with Crayon Marking (Optional) connected to a CAM-WOOD 12" wide End Matcher; System width capacity is 12" with a maximum inbound board length of 16' (as priced here). 8' and 12' Saws are also available. Call Jeff for price deduction. Data: -- Cut-Off Saw is arranged ...more
Esporta #IS-4000, Wash System, 4 compartment, 220 V., 1ph, 3" drainage, 2018
Revelation Machinery | Chicago, IL
Category: Washer Parts - Miscellaneous
Seller: Revelation Machinery
Location: Chicago, IL
Model: IS-4000
Year: 2018
Make: Esporta, Model: IS-4000, Year: 2018, Machine Location: Arizona, Number of Washing Compartments 4, Capacity 100 lbs (45 kg), Electrical Requirements 220V Single Phase, 40 Amp, Water Input 3/4″ Hot & Cold water lines, Drainage 3″, Detergent Pumps 6.
JUST ADDED!
0.51" x 1.18" Salvamac #SalvaPush2000, Optimizing Cut-Off Saw, 20" saw blade diameter, 10.62" max. width, 4.72" max. thickness, 7.5 HP arbor motor, 296 FPM, 230/460 Volt, 2024
Ex-Factory | Charlotte, NC
Category: Cutoff Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Salvamac
Model: SALVAPUSH 2000
Year: 2024
SALVAMAC SALVAPUSH 2000 Optimizing Cut Off Saw Highly accurate Push Feed Saw, right-hand version (material feeds from right-to-left). -- Working cap.: 4.72" Thick x 10.62" wide max.;.51" x 1.18" minimum; 1.64 Min. to 13.45' max. infeed board lengths. -- : 7.5 HP Arbor motor; 20" dia. saw blade; precision servo ...more
Economy Industrial, ingot casting machine - MAKE AN OFFER!
FX Solutions | Butte, MT
Category: Continuous Casting Machines
Seller: FX Solutions
Location: Butte, MT
Mfr: Economy
Year: 2020
-Economy Industrial MC-10 Ingot Casting Machine., -This machine was purchased brand new in 2020 and was used with an R&D electric arc furnace., -It was operated approximately 10 times and is in excellent condition., -There are 52 cast iron molds that come with the machine, along with 4 spares., -It is rated for 3000 ...more
18" x 22" Marvel #8-Mark-2-II, vertical band saw, 1" x 174" blade, 50 to 450 FPM, 24.25 x 33 woek area, 18" opening, 6" H x 12" W jaw, new
Pioneer Machine Sales | Rosenberg, TX
Category: Vertical Band Saws
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Model: 8-MARK-2-II
Blade Width 1" Blade Length 174" FPM 50 to 450 FPM Condition New, Capacity: 90° 18" x 22", Capacity: 45° 18" x 12.75", Speed range 50-450 fpm infinitely variable speed drive system., Front-mounted speed control Allows blade speed to be adjusted from operator's control station. ...more
Kaltenbach #KKS-400, Automatic Cold Saw
AM Industrial | Brook Park, OH
Category: Carbide, Friction and Cold Saws
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Kaltenbach
Model: KKS-400
Kaltenbach 15-3/4" (400mm) Fully-Automatic Cold Saw - Used - AM23259, Model: KKS400, Serial: 104686, Capacities:, Hydraulic up-stroking blade: 15-3/4" (400mm) Round: 5" @ 90° & 45° Square: 4-3/4" @ 90° & 1-3/8" @ 45° Rectangle: 7" x 4" @ 90°, Designed for high production & high ...more
10" x 13" PMI #Panther-BS-300A, fully automatic horizontal band saw, 12.6' x 1-1/4" blade
Pioneer Machine Sales | Rosenberg, TX
Category: Horizontal Band Saws
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Pmi
Model: PANTHER-BS-300A
The PMI Panther BS-300A fully automatic horizontal band saw for steel with NC touchscreen control offers, high performance sawing capability where production, accuracy and ease of set up are of importance., The band saw is ideal for machine shops and metal service centers that Steel, Stainless Steel, Aluminum, Copper ...more
14" Crosscut Solutions CS14P, pneumatic cutoff saw, 2" x 8" cross cut, 7-1/2 HP, magnetic starter, 1" bore, 100 tooth carbide tipped, 2026, new
Ex-Factory | Charlotte, NC
Category: Cutoff Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Crosscut Solutions
Year: 2026
CROSSCUT SOLUTIONS CS14P Pneumatic Upcut Saw: -- 2" x 8" Cross cut cap.; pneumatically operated cut-off saw; 7-1/2 HP TEFC motor with magnetic starter with 110-volt control voltage; adjustable cycle speed of up to 90 Cy/Min; accepts 18" saw blade (not included - add $250 for 14" saw blade). -- NOTE: State right or ...more
Caterpillar 725, Articulated Truck, 360 hours, S/N: 3T901238, 2024
Wyoming Machinery - Cat | Gillette, WY
Category: Articulated Dump Trucks
Seller: Wyoming Machinery - Cat
Location: Cheyenne, WY
Mfr: Caterpillar
Model: 725
Year: 2024
4 HYDRAULIC SPRAY HEADS, AID, COLD WEATHER STARTING, ANTIFREEZE, -36C (-33F), BERKELEY 5X4 HYDRAULIC PUMP, CAB, STANDARD, CHASSIS, STANDARD (NO BODY), EXHAUST, STANDARD, FILM GROUP, ANSI, FUEL ADDITIVE, ANTI WAX, GROUP, ETHER, HAMILTON 5000 GALLON WATER TANK, HEATER, ENGINE COOLANT, 120V, LIGHTS, ROOF MOUNTED WORK ...more
13.75" Dake Mep #Tiger-350AX, automatic vertical cold saw, 7.5" vise, 15-90 RPM, multi-indexing
D & D Industries Inc | Monclova, OH
Category: Carbide, Friction and Cold Saws
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Mep
Model: TIGER-350AX
ORDER 350, DAKE MEP Tiger 350 AX Miter Automatic Cold Saw, Model: Tiger 350AX, Serial #: 006039 TTR, Maximum Blade Size: 13-3/4″, Capacity @ 90° Round: 4-1/2″, Capacity @ 90° Square: 3-3/4″, Vise Opening: 7-1/2″, Blade Speeds: 15/30/45/90 RPM, Maximum Length of Feed: 24″, Motor ...more
14" Doringer #D350, cold saw, 230 V., 1-phase, mitering head, coolant
Sterling Machinery Exchange | South El Monte, CA
Category: Carbide, Friction and Cold Saws
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Doringer
Model: D350
Blade Size 14" Cutting Capacity: 90 Degree 45 Degree Round Tube (45 Degree) 4-3/4" Square Tube (45 Degree) 3.6" Solids (45 Degree) 2-1/2" Voltage 230v, 3 Phase Dimensions ( L x W x H ) 36" x 26" x 58" WEIGHT 750 Lbs. S: Mitering Head Single Phase Motor Coolant Systerm.
Gabbiani #Galaxy-T3-110, Rear Load Automatic Panel Saw, 177" Rip Cut capacity, 4.5" Saw Blade Projection, 492/557 FPM, 15 HP, 2015
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gabbiani
Model: GALAXY T3 110
Year: 2015
GABBIANI GALAXY T3 110A REAR LOAD, AUTOMATIC PANEL SAW: -- :177" (4,500 mm) Overall rip cutting cap.; 4.5" (115 mm) max. saw blade projection; 15 HP (11 kW) main motor w/pneumatic "quick change" saw blade system; 2.4 HP (1.8 kW) scoring motor. -- Saw Carriage: Variable speed from 0 - 492/557 FPM (0 - 150/170 MPM); ...more
FlexBlow #FB2-3, Stretch Blow Molding Machine
Revelation Machinery | Chicago, IL
Category: Plastic Blow Molders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Flexblow
Model: FB2-3
Year: 1900
Make: FlexBlow, Model: FlexBlow, Year: 1900, Machine Location: Upon Request, – Flow Regulation: Supreme mold chilling, – Pressure Regulation: Electrical pressure regulation and control for 1st, 2nd blowing and compensation plates, – LP Air Flow: Regulation of LP air-flow for each cavity separately ...more
Scotchman #2T5LT Netal Cutting Saw, 12" blade, 2-1/2 HP, 230 v., vise for holding materials
Carolina Machinery Sales | Monroe, NC
Category: Carbide, Friction and Cold Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Scotchman
Model: 2T5LT
Approx. 12” blade, 2-1/2 HP motor, vice for holding materials, 230 volt single phase.
20" x 12" DoAll #2012-2H, vertical band saw, 154" band length, welder/grinder/shear, 5 HP, 1979
Yoder Machinery Sales | Holland, OH
Category: Vertical Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Doall
Model: 2012-2H
Year: 1979
SERIAL. 383-79123, MODEL. 2012-2H, YEAR NEW. 1979, THROAT, BAND TO COLUMN. 20", MAXIMUM WORK HEIGHT. 12", BAND WIDTH CAPACITY. 1-1/16" TO 1", SAW BAND LENGTH. 154", BAND SPEED RANGE. 5 TO 5200 FPM, VARIABLE, TABLE SIZE. 26-1/2" X 33-1/2", TABLE STROKE. 12", TABLE FEED, HYDRAULIC. 0 TO 6 FPM, TABLE FEEDING FORCE. 0 TO ...more
375 cfm, 150 psi, Sullair #375HAF, mobile air compressor, Cat TF4 engine, 419 hours, 2024
Foley Equipment - Power | Wichita, KS
Category: Portable Air Compressors
Seller: Foley Equipment - Power
Location: Wichita, KS
Mfr: Sullair
Model: 375HAF
Year: 2024
Notes. - FOLEY WORK READY -, s -20 F COLD WEATHER PACKAGE 375 HAF, 2" BALL HITCH AFTERCOOLED AND FILTERED. LCD GRAPHIC DISPLAY. ONTROLLER WITH GAUGE & LCD RATED 375 CFM @ 100-150PSI, C4.4 SULLAIR MOBILE AIR COMPRESSOR T4F DIESEL ENGINE, CURBSIDE VIN - US0124060047.
Super Radiator Coils / C.E. Rogers, Stainless Steel Plate / Fin Heat Exchanger, 8 0.5" diameter x 24" L Tubes, 1997
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Combustion Engineering
Year: 1997
1997 Super Radiator Coils / C.E. Rogers Stainless Steel Plate / Fin Heat Exchanger. 304L Stainless Steel Tubes and Fins. Super Radiator Coils Steam Coil. S/N: M61294-1-001. (8) in. dia. x 24 in. L 304L Stainless Steel Tubes. Heat Transfer Surface Area: 2.1sq. ft. C.E. Rogers Cold Air Duct and filter chamber. (160) in. ...more
Elumatec #DG-142, Automatic Double End Miter Saw, 3000 mm bed length, 370 mm cutting length, 500 mm blade diameter, 2800 RPM, 2002
Ex-Factory | Charlotte, NC
Category: Miter Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Elumatec
Model: DG-142
Year: 2002
ELUMATEC DG 142 Double Miter Saw - 3 m (118")This high quality miter saw is designed for PVC and ALUMINUM profiles and can handle profiles from 13-3/4" (350 mm) to 118-1/8" (3,000 mm) with automatic positioning of the saw heads through linear guides.The fixed head is on the left. Motorized saw head adjustment with ...more
Tsune Seiki #TK5M-90PL, Saw, 460 V., w/ feeder, Control cabinet, 2006
HGR24 | Euclid, OH
Category: Circular Saws
Seller: HGR24
Location: Euclid, OH
Mfr: Tsune
Model: TK5M-90PL
Year: 2006
Inventory No. 1125-115-0003 Manufacturer Tsune Seiki Model No. TK5M-90PL Name Saw Arrival Date 12-01-2025 Dimensions L x W x H (inches) Unavailable Electrical 3/60/460 Weight (lb.) 6090 Category Fabrication Condition Used Available Quantity 1 Serial No. 01609 Make Year 2006 Item Feeder, Control Cabinet, (130#) ...more
Cam-Wood #RS-612X, Radial Arm Saw, 2 HP, 3-1/8" cut depth, 10-12" diameter blade, 27" trimming width x 16-1/2" crosscut, 1" diameter spindle, 25-1/2" x 31-1/2" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Radial Arm Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: RS-612X
Year: 2026
CAM-WOOD RS-612X Radial Arm Saw Sturdy cast iron frame for saw head and arm.: -- 2 HP Single-phase motor; 3-1/8" cutting depth with 10-12" dia. blade; 27" max. trimming width x 16-1/2" max. crosscut; 1" dia. spindle. : -- Magnetic starter, and overload protection. -- Positive locking device for tilting. -- Saw head ...more
Weeke #BHX-500, CNC Woodworking Machining Center, 2-Head, 118" X, 39" Y, 3.1" material thickness, Weeke PC85T power control, 230/400 Volt, 2007
Ex-Factory | Charlotte, NC
Category: Woodworking CNC Machining Centers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weeke
Model: BHX 500
Year: 2007
WEEKE - BHX 500 OPTIMAT: CNC Machining Center (2-Head) -- Flexible "TOP & BOTTOM" Machining Center with: RH Infeed transfer conveyor belts; automatic LH outfeed transfer conveyor belts that uses an innovative panel handling system. -- Working CapacityMax. workable part size. "X" Axis: 118.1" (3,000 mm); "Y" Axis: ...more
39.3" x 31.4" DoAll #DC800NC, prod bandsaw, PLC, 2-5/8" x 0.063" x 347" band, 52-275 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC800NC
39.3″ x 31.4″ Band Saw with PLC Control for all Electric and Hydraulic Functions Infinitely Variable Speed Controlled by VFD Hydraulic Retractable Shuttle Vise Material Indexer Rapid and Creep Speed Index Vise Control Multi-Step Full Stroke Vises with Split Front Vise and Variable Vise Pressure Control ...more
Cam-wood VPS-TWIN, Aluminum Composite Vertical Panel Saw, 78-3/4" x 157-1/2, 4 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD - VPS Twin,.Automatic Vertical Panel Saw, for Cutting & Grooving Aluminum Composites (78-3/4" x 157-1/2").The VPS TWIN is engineered with specific s for cutting or grooving Aluminum Composite or similar materials. Top to Bottom cutting height is 2,000 mm (78-3/4"). Saw head w/motor rotates 90 for rip or ...more
Trennjaeger / Promocut #16/60/10H cold saw, 20" dia.blade, 27" table, 10/20 HP, #72479
Yoder Machinery Sales | Holland, OH
Category: Carbide, Friction and Cold Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Trennjaeger
Model: 16/60/10/H
SERIAL. 9351, MODEL. 16/60/10/H, PNEUMATIC. 350/450, BLADE SIZE. 20" DIAMETER, MITRE GUIDE, TABLE. 27" L-R, TABLE HEIGHT. 32" ABOVE FLOOR, MOTOR 10/20 HP 220/ 440 - 3470 RPM, OVERALL FLOOR AREA 60" L-R X 60" F-B.
24" x 8" Metlsaw #CS216-T8, non-ferrous precision cold saw, 12' back gauge, 500 FPM, 30 HP
National Machinery Exchange | Newark, NJ
Category: Carbide, Friction and Cold Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Metlsaw
Model: CS216-T8
MANUFACTURER - METLSAW, MODEL - CS216-T8, TYPE - ALUMINUM PROFILE EXTRUSION SAW, CAPACITY - 24" W X 8" H, CONTROLS - ALLEN BRADLEY TOUCH SCREEN, BACKGAUGE - 12', CUT LENGTH RANGE - " - UNLIMITED, MOTOR - 30 HP, CARRIAGE CUTTING SPEED - TO 500"/MIN, BACKGAUGE INCREMENT SPEED - TO 500"/MIN, BACKGAUGE REVERSE SPEED - ...more
4" Kasto #Speed-10, Cold Saw, w/CNC Control, 4" x 3" capacity, 14" Blade diameter, 63" L x 120" width, 55-575 FPM, 14 HP, 2008
Machine Tool Bids | Chicago, IL
Category: Carbide, Friction and Cold Saws
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Kasto
Model: SPEED 10
Year: 2008
Used 2008 Kasto speed 10. Machine Tool Bids offers plenty of Cold Saws and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Kasto speed 10 or any of our machines., MACHINE, Capacity: 4"x 3", Blade Drive: 14 hp, Cutting Speed: 55 to 575 FPM, Clamping Force: ...more
Wanco WLTT, Light Tower, S/N: R1007875, 2024
Wyoming Machinery - Cat | Gillette, WY
Category: Light Towers
Seller: Wyoming Machinery - Cat
Location: Rock Springs, WY
Mfr: Wanco
Model: WLTT
Year: 2024
& GFI JUNCTION BOX/CORD), 2-INCH BALL HITCH, 240V TWIST LOCK RECEPTACLE, BLOCK HEATER, BATTERY BLANKET, COLD START AID PACKAGE (OIL PAN, KUBOTA D-1005 ENGINE, 350 W, LEDS, 6KW GEN SET, VIN# 5F13D1010R1007875.
Cooper End Dog Scragg Sawmill, complete mill, (2) Infeed Decks, cut off saw, debarker
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cooper
Complete mill that needs to be removed from the current location. Seller will not split up the operation., (2) Infeed Decks:, - (2) 3-Strand Infeed Deck 24' Long, - H82 Chain, - 3-7/16" Shaft, - (2) 10 HP Drives, - 3-Strand infeed deck 60' Long, Cut Off Saw:, - 54" Saw, - 20 HP Motor, - Hourglass rollers, - ...more
3" Fabri-Valve, Knife Gate, Stainless Steel, 150 psi CWP, 150 F max.
Cooper Industries Llc | Millwood, WV
Category: Gate Valves
Seller: Cooper Industries Llc
Location: Millwood, WV
ITEM 3066: 3” KNIFE GATE FABRI-VALVE PRODUCT # FV-C4220005600, 3” KNIFE GATE FABRI-VALVE PRODUCT # FV-C4220005600, S316 CONSTRUCTION KNIFE AND BODY, WP: 150 COLD WORKING PRESSURE, TEMP: -20/150 F, SERIAL # 300082383-190017936, PRICE, FOB HAW RIVER, NC. $ 400.00.
16" x 20" W.F. Wells #F1620, Horizontal Bandsaw, 1.25" x .042" x 15" Blade, 20" Bandwheel, 60-500 SFPM, 7.5 HP, 1994
Machine Tool Bids | Chicago, IL
Category: Horizontal Band Saws
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: W.F. Wells
Model: F1620
Year: 1994
Used 1994 WF Wells F1620. Machine Tool Bids offers plenty of Horizontal Band Saws and other fabrication and CNC machines for great prices. Contact us if you have any questions about this WF Wells F1620 Bandsaw, MACHINE, Capacity: Rectangular at 90Deg 16" High x 20"Wide, Round 16" Diameter, Weight Capacity: ...more
Metalcut #12R.H. Bar / Billet Cut Off Saw
National Machinery Exchange | Newark, NJ
Category: Cutoff Saws
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Metalcut
Model: 12R.H.
12" METALCUT MODEL 12RH HIGH SPEED AUTOMATIC CARBIDE BILLET COLD SAW, MODEL. 12" RH, NEW. 1973, CAPACITY - ROUNDS. 12", BLADE DIAMETER. 24" TO 40", BLADE SPEEDS. VARIABLE, 200 TO 600 RPM, SAW HEAD INFEED. HYDRAULIC, HEAD SLIDE GIBBING. 6 GIBS, FEED LENGTH PER STROKE. UP TO 36", DUAL CLAMPING. YES, HYDRAULIC, RUN ...more
Republic-Lagun #RZL52-200-S-15-3-80-D, Shredder, 52" width, 15" diameter water cooled rotor, 80" hydraulic ram draw, 200hp, 1785 RPM, in-feed conveyor, metal detector, spare rotor & gearbox
Arlington Machinery | Lake Zurich, IL
Category: Shredders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Republic-Lagun
Model: RZL52-200-S-15-3-80-D
Used 52" Wide Republic Single Shaft Shredder, RZL52-200-S-15-3-80-D, 200hp 15" Diameter Water Cooled Rotor, 80" Hydraulic Ram Draw 200hp WEG AC Inverter Duty Motor, 1785 RPM, 230 Amps 7.5hp Hydraulic Power Pack Republic Touchscreen Control Panel 2" Square Screen, Spare 3" Circular Screen 24" High Discharge S/N: ...more
Nielson Saw & Mfg Circle Saw Grinder, 110V 3 phase
Carolina Machinery Sales | Monroe, NC
Category: Saw Sharpeners
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Nielson Saw & Mfg
Circle Saw Grinder, 110V 3 phase.
5" x 10" FMB #Phoenix, horizontal band saw, 8' x 1" x .035" blade, 115 and 230 FPM, 1 HP
Pioneer Machine Sales | Rosenberg, TX
Category: Horizontal Band Saws
Seller: Pioneer Machine Sales
Location: Rosenberg, TX
Mfr: Fmb
Model: PHOENIX
Phoenix, Is a great option for small production, Quick Setup, Miter cutting, and Material thickness in the Light to Mid thickness range., Standard s & Equipment:, Up to 60-degree miter, 8-5/8" Round Cutting Capacity, Available in Manual Pull Down or Gravity Feed, Round Cutting 0 Degree 8-5/8" 45 Degree 6" 60 ...more
Cat 415-07A, Backhoe Loader, 1069 hours, S/N: H8A00242, 2021
Boyd Cat Company | Parkersburg, WV
Category: Backhoe Loaders
Seller: Boyd Cat Company
Location: Lexington, KY
Mfr: Caterpillar
Model: 415-07A
Year: 2021
415 07A BACKHOE LOADER, AIR CONDITIONER, T4F, BELT, SEAT, 2" SUSPENSION, CAB, STANDARD, COLD WEATHER PACKAGE, 120V, COUNTERWEIGHT, 1015 LBS, CUTTING EDGE, TWO PIECE, DISPLAY, STANDARD, ENGINE, 55KW, C3.6 DITA, T4F, FENDERS, FRONT 4WD, GUARD, STABILIZER, HYDRAULICS GP, 5FCN/7BNK, PT, INSTRUCTIONS, ANSI, LANE 3 ORDER ...more
1' 9.5" x 20" Patterson, Ball Mill/Reactor, 21.5" diameter x 20" Straight Wall plus Dished ends, 8 HP, 1977
Ingalls Process Equipment | Painesville, OH
Seller: Ingalls Process Equipment
Location: Painesville, OH
Mfr: Patterson
Year: 1977
One (1) used Vacuum Sealable Patterson Ball Mill Reactor National Board Number 1758 Shell: Rated for 125 PSI or FV at 650 degrees F Jacket: Rated for 150 PSI at 650 degrees F Serial number: 770437 21.5" diameter x 20" straight wall plus dish ends Circular Door: 8" diameter Stainless steel chamber and ...more
14" Scotchman Bewo #CPO-350-NF-HA, non-ferrous saw, 60° miter, hand down feed, 5 HP
Yoder Machinery Sales | Holland, OH
Category: Circular Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bewo
Model: CPO-350-NF-HA
SERIAL., MODEL. CPO NFHA, DIAMETER OF BLADE. 13.7795", MITERING. 60 DEGREES LEFT & RIGHT, DOWN FEED. HAND, CUTTING SPEEDS. 3000 RPM, CAPACITY TUBING @ 90. 4.5", CAPACITY TUBING @ 45. 4.250", CAPACITY SQUARES @ 90. 4.250" X 4.250", CAPACITY SQUARES @ 45. 4" X 4", CAPACITY RECTANGLES @ 90. 5-1/2" X 4", CAPACITY ...more
Holzma #HPP-350, front load automatic panel saw, 122" length, Cadmatic 4.0 Control, 2005
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holzma
Model: HPP-350
Year: 2005
HOLZMA HPP 350 31/31 FRONT LOAD, AUTOMATIC PANEL SAW: -- 122" (3,100 mm) cut length; 3" (80 mm) main saw blade projection; 18 HP main saw motor and 3 HP (2.2 kW) scoring motor; scoring saw adjustment is from the "CADMATIC 4.0" control. -- Saw carriage: -- Travel speed from 16 - 426 FPM (5 - 130 MPM), constant return ...more
Cat 950QC, Wheel Loader, 1187 hours, S/N: TN200857, 2024
Ring Power Cat - Heavy Machinery | St. Augustine, FL
Category: Wheel Loaders
Seller: Ring Power Cat - Heavy Machinery
Location: Jacksonville, FL
Mfr: Caterpillar
Model: 950QC
Year: 2024
4.5CYD FUSION GP BUCKET W/BOCE, 72" FUSION PALLET FORKS, AIR INLET PRECLEANER, TURBINE, ANTIFREEZE, -34C (-29F), AXLE OIL COOLER READY, ED, AXLES, MAN/OPEN JSTK, CAB, DELUXE, STRG JOYSTICK, COOLING CORES, 9FPI, COUNTERWEIGHT, AUXILIARY, FAN, STANDARD, FENDERS, FRONT W/REAR EXTN, FILTRATION, STANDARD, GUARD ...more
1/8" Shanghai Wuling #SD-30, Bi-Metal contact heading machine, 0-130 PPM, vari-speed, 2014
Hariton Machinery Co Inc | Bridgeport, CT
Category: Cold Headers
Seller: Hariton Machinery Co Inc
Location: Bridgeport, CT
Mfr: Shanghai Wuling
Model: SD-30
Year: 2014
Diameter of Rivet Shank 1.2-3.0mm Diameter of Rivet Head 2.5-6.0mm Pieces Per Minute 0-130 Electrics 2.2Kw AC Motor and Controls Weight 2420 Lbs., This machine can produce cold headed solid and bi-metal contacts in a wide variety of materials., AC Inverter for Variable Speed.
Diehl #SL-30, Fixed Arbor Straight Line Rip Saw, 15HP spindle, 2 HP feed, 60 FPM feed, New
RT Machine | Hughesville, PA
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Diehl
Model: SL-30
Diehl Model SL-30 Fixed Arbor Straight Line Rip Saw The Model SL30 sets the industry standard for accuracy, durability, and lowest cost of ownership. Bolt this machine to the floor and forget about it - It is THAT reliable. 208, 240 or 480 volt, 3 phase, 60 cycle 15 HP belt driven saw spindle 2 HP feed motor Automatic ...more
Caterpillar 140M3 AWD, Motor Grader, 6169 hours, S/N: N9J01205, 2019
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Motor and Road Graders
Seller: Wagner Equipmet - Heavy Machinery
Location: Hobbs, NM
Mfr: Caterpillar
Model: 140M3 AWD
Year: 2019
150 AMP ALTERNATOR, 4867 GD 5/2/24, ACCUMULATORS, BLADE LIFT, ARTICULATION GUARD, BASE + 2 (FL,RIP), BATTERIES, EXTREME DUTY 1400, BRIDGESTONE VKT 17.5R25 @3403 HR, C9.3 ENGINE, CAB, PLUS (INTERIOR), CAB, PLUS (STANDARD GLASS), CAMERA, REAR VISION, CAT CERTIFIED USED, COLD START; TRANS OIL & BRKE, COLD WEATHER ...more
JUST ADDED!
Gabbiani #P-75, front load automatic panel saw, 12.6" blade, eye-M controller, 15 HP, 7.87" scoring blade diameter
Ex-Factory | Charlotte, NC
Category: Panel Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Gabbiani
Model: P-75
GABBIANI P 75 FRONT LOAD, AUTOMATIC PANEL SAW: -- : eye-M controller Blade projection 70mm (2.76") Main Motor - 15hp Blade diameter - 300mm (12.6") Scoring blade motor - 2hp Scoring blade diameter - 200mm (7.87") Pusher speed - 70m/min Saw Carriage speed - 0-100m/min Two position optimized blade height Three air ...more
Baker #PAQ-II, Band Re-saw, 2-Head, 8" x 12" capacity, (2) 20 HP, 2026, new
Ex-Factory | Charlotte, NC
Category: Resaw Band Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Baker
Model: PAQ-II
Year: 2026
BAKER PAQ II Band Re-Saw. -- 2-Head Re-Saw, 8" x 12" cap., (2) 20 HP motors. -- : BAKER Octaguide System, moveable sawheads, stationary conveyor belt, rough top belting and infeed hold down wheel. -- (2) Main drive 20 HP motors. -- Options available at extra charge: Powered hold-down, BAKER Quik-Sharp band blade ...more
Cat 950QC, Wheel Loader, 756 hours, S/N: TN201002, 2024
Ring Power Cat - Heavy Machinery | St. Augustine, FL
Category: Wheel Loaders
Seller: Ring Power Cat - Heavy Machinery
Location: 10421 Fern Hill Drive, FL
Mfr: Caterpillar
Model: 950QC
Year: 2024
72" FUSION PALLET FORKS, AIR INLET PRECLEANER, TURBINE, ANTIFREEZE, -34C (-29F), AXLE OIL COOLER READY, ED, AXLES, MAN/OPEN JSTK, BKTA GP ST 115" 4.50YD3 FUS, CAB, DELUXE, STRG JOYSTICK, COOLING CORES, 9FPI, COUNTERWEIGHT, AUXILIARY, FAN, STANDARD, FENDERS, FRONT W/REAR EXTN, FILTRATION, STANDARD, GUARD, POWERTRAIN ...more
Peddinghaus #BDL-1250/9B, Beam Drill Line, With MEBA 1270GP Saw, 2010
Revelation Machinery | Chicago, IL
Category: CNC Beam/Drill Lines
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Peddinghaus
Model: BDL-1250/9B
Year: 2010
Make: Peddinghaus, Model: BDL-1250, Year: 2010, Machine Location: Upon Request, 2010 Peddinghaus BDL- 1250/9B Beam Line, Maximum Profile Width: 49″, Minimum Profile Width: 3″, Maximum Profile Height: 24″, Maximum Work Piece Weight: 19,867 Kg, Number of Drill Spindles: 9, 9 Drill Spindles per Axis: 3 ...more
Western Pneumatics #FJWW248, heavy duty finger jointer, 2" x 8" x 36" capacity, 12' pre-assembly infeed conveyor, flying cutoff saw, 1998
Ex-Factory | Charlotte, NC
Category: Woodworking Jointers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Western
Model: FJWW248
Year: 1998
WESTERN PNEUMATICS HEAVY DUTY FINGER JOINTER WITH THE FOLLOWING EQUIPMENT & S: -- Right & Left Shaper Section: Thickness Capacity: 3/4" - 2" maximum; Width Capacity: 1-1/2" - 8" maximum; Length Capacity: 5" min. - 36" maximum; -- (2) Scoring Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Trim Saws with 7-1/2 HP ...more
8" Bison, 3-jaw adjustable chuck
Machinery Central | Louisville, KY
Category: Lathe Chucks
Seller: Machinery Central
Location: Louisville, KY
Mfr: Bison
, Bison 8" 3 Jaw Adjustable Chuck available now. This used lathe chuck s an 8" overall diameter, 3 jaws, and a 2-1/2" center hole ID. Ideal for tooling and accessory needs. Secure a reliable BISON chuck today., Spec Sheet:, Bison 8" - 3 Jaw Adjustable Chuck, USED, Brand: Bison, 3 Jaws, Adjustable Chuck, Overall ...more
Haas #TM-2, CNC vertical machining center, 20 automatic tool changer, 40" X, 16" Y, 16" Z, 6000 RPM, 7.5 HP, 10.5" x 57.75" table, CAT-40, rigid tap, coolant, 2006
Westbrook Engineering Co | Warren, MI
Category: Vertical CNC Machining Centers
Seller: Westbrook Engineering Co
Location: Warren, MI
Mfr: Haas
Model: TM-2
Year: 2013
Used 2013 FICEP 1001 DDB Beam/Drill Line in good condition, perfect for efficient industrial applications. Optimize your production with this reliable equipment from a trusted manufacturer. Contact for., Brand: Ficep, Model: 1001 DDB, Drill :, No. or spindles rotating: 1, Beam depth min. - max.: 3-1/8" - 40", Flange ...more
Northtech #NT-SLR-16SC, straight line rip-saw, 16" single blade, 15 HP, 230/460 V., 3-phase, 40-120 FPM, 2021
Ex-Factory | Charlotte, NC
Category: Straight Line Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Northtech
Model: NT-SLR-16SC
Year: 2021
Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw FEED SYSTEM --Saw motor: 15HP, 3PH 230/460V -- Feed: 1.5HP variable from 40′ – 120′ FPMPRODUCT DIMENSIONS -- Min. thickness: 3/16″ -- Max depth of cut: 4-1/16″ with 16"; Blade -- Max depth of cut: 3-1/16"; with 14"; Blade: -- ...more
Redford #HP42, shell core machine
FL Sales Inc | Solon, OH
Category: Shell and Cold Box Core Machinery
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Redford
Model: HP42
Cam-wood #FSM-460AX, finger joint shaper, 10 HP, 50 mm diameter spindle, 5500 RPM, 160 mm max diameter cutter, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shapers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: FSM-460AX
Year: 2026
CAM-WOOD FSM-460AX Finger Joint ShaperSingle Finger joint Shaper with 8" min. and unlimited max. block length; 4" max. block thickness, maximum timber height to feed into assembly press is 3"; 18" max. block width (horizontal joint only); 18" table working width.: -- Shaper spindle powered by 10 HP belt drive motor ...more
Cam-Wood #CS-650SSC, Double End Matcher, 1-1/2"-6" width, 1/2"-1" thickness, 8"-50" L, 70 FPM, 10" diameter Saw blade, 2026, new
Ex-Factory | Charlotte, NC
Category: End Matchers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: CS-650SSC
Year: 2026
CAM-WOOD CS-650SCC Double End Matcher For Herringbone and Chevron FlooringNC Controlled Trough Feed Type End Matcher for Chevron and Herringbone flooring: -- Working Width 1-1/2"; to 6"; -- Working Thickness 1/2"; to 1"; -- Working Length 8"; to 50"; -- Feed Speed 70 FPM with inverter -- Cycle time can be 4 to 8 ...more
FOM Industrie #BLITZ-ALVA-500A, Double-Head Mitre Saw, 3-axis, 19.7" max. cutting, 94.5" mobile head roller table, 2.9 HP, 2800 RPM, TEX CNC control, 2014
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Carbide, Friction and Cold Saws
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Fom
Model: BLITZ-ALVA-500A
Year: 2014
FOM BLITZ ALVA 500A DOUBLE HEAD MITRE SAW, NEW 2014, Fom Industrie Blitz Alva 500, Double Heads, 3-Axis, 19.7" Max. Cutting Capacity, 94.5" Mobile Head Roller Table, 2.9 HP Blade Motor, 3 Horizontal Vises, 2 Vertical Vises, Profile Height Measuring Device, Vertical Vises Internal Side of Blade: 2, Electronic Profile ...more
Conair #TS524-UP, plastic pipe traveling cutoff saw, 3 HP, L to R, #74231
Yoder Machinery Sales | Holland, OH
Category: Cutoff Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Conair
Model: TS524-UP
SERIAL. 1527055200, MODEL. TS524-UP, CAPICTY EXTRUDED PIPE OR PROFILES. 5 INCH DIA, BLADE DIAMETER CARBIDE. 18" DIA, BLADE CUTS FROM UNDERNEATH. YES, FLYING TABLE TRAVELS WITH PRODUCT. 24", THE PRODUCT IS CLAMPED WITH ADJUSTABLE RUBBER PADS. YES, MOTIONS ARE ACTIVATED PNEUMATICALLY WITH SEED CONTROL.YES, DIRECTION ...more
Caterpillar CATERPILLAR PC305 COLD PLANER, Cold Planer, S/N: DZK00795, 2024
Milton Cat - Heavy Machinery | Milford, MA
Category: Cold Milling Machines / Planers
Seller: Milton Cat - Heavy Machinery
Location: Brewer, ME
Mfr: Caterpillar
Model: CATERPILLAR PC305 COLD PLANER
Year: 2024
CATERPILLAR PART NUMBER 529-5780, CATERPILLAR PC305 COLD PLANER, DRUM WIDTH: 18", OVERALL WIDTH: 73", REPLACEABLE SIDE SKIDS, REQUIRES HIGH FLOW OR HIGH FLOW XPS HYDRAULICS, SELF LEVELING, SOLD AS IS.
Cat 950M, Wheel Loader, 5530 hours, S/N: J1S02318, 2019
NMC - Heavy Machinery | Omaha, NE
Category: Wheel Loaders
Seller: NMC - Heavy Machinery
Location: Doniphan, NE
Mfr: Caterpillar
Model: 950M
Year: 2019
950M WHEEL LOADER, Air Conditioner, AIR INLET PRECLEANER, TURBINE, ANTIFREEZE WINDSHIELD WASHER, ANTIFREEZE, -34C (-29F), AUTO DIFF, HMU, Auto Lube, Auto Shift, AUTOLUBE, STD/LOGGER, AXLES, AUTO DIFF F/R, ED, AOC, BKT GP ST 114" 4.5 YD3 PO, Bucket, CAB TRIM, HEATED, COOLING CORES, 6 FPI, COUNTERWEIGHT, 1460KG, CUTTING ...more
13-3/4" Pedrazzoli #Super-Brown-350/60-MRM, manual cold saw, S/N 027562,1997
N S Machine Corp. | Granger, IA
Category: Carbide, Friction and Cold Saws
Seller: N S Machine Corp.
Location: Granger, IA
Mfr: Pedrazzoli
Model: SUPER-BROWN-350/60-MRM
Year: 1997
, Manufacturer: Pedrazzoli, Model Number: Super Brown 350/60 MRM, Serial Number: 027562, Model Year: 1997, Size: 13-3/4″, Stock Number: 13079, s:, Rotating Head for Mitering, Manual Quick Clamp Vice Operation, Removable Anit-Burr, Head Tilting, Forward & Reverse Blade Rotation, Emergency Stop, Safety Switch ...more
Super Brown #350, cold saw, manual vise, 2 HP, 18-3 RPM, #72342
Yoder Machinery Sales | Holland, OH
Category: Carbide, Friction and Cold Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Super Brown
Model: 350
Year: 1987
MODEL. 350, CAPACITY RECTANGLES @ 45. 4-21/64" X 3/5/32", CAPACITY SQUARES @ 45. 3.543, CAPACITY ROUNDS @ 45. 4.330, CAPACITY ROUNDS @ 90. 4.527, CAPACITY SQUARES @ 90. 3.740, CAPACITY RECTANGLE @ 90. 6-19/64" X 3-35/64", BLADE SPEED VARIABLE. 18 TO 93 RPM, VISE. MANUAL, HORSEPOWER. 2.
Star V Machinery #SLG-2000, linear v-groover, 120" L x 36" W table, 2026
Ex-Factory | Charlotte, NC
Category: Woodworking Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Star
Model: SLG-2000
Year: 2026
STAR V MACHINERY SLG-2000 36 LINEAR V-GROOVER: -- Working table dimensions: 120" Long x 36" wide; working width: 6" - infinite" (152 mm - infinite); working length: 20" - infinite (508 mm - infinite); working thickness: 0.25" - 1.15" (6 - 29 mm).Max. throat clearance for linear & crosscuts: 14-1/2"/24-1/2" ...more
3-3/8" Startrite #CP275SO, Manual Cold Saw, 30/60 RPM, 230 V., 10.8" blade, 1.3" arbor bore
Wheeler Machinery Sales | Pomona, CA
Category: Carbide, Friction and Cold Saws
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Startrite
Model: CP275SO
STARTRITE CP275SO Manual Cold Saw #7856 #1, Cutting Speeds: LT (Low Turn) - designed for solid mild steel, solid stainless steel & thick wall pipe: 30/60 rpm, Maximum Cutting Capacities (with 275 mm blade):, Tubing:, Round 90: 3-3/8", Square 90: 3" x 3", Rectangle 90: 3" x 2-3/8", Round 45: 2", Square 45: 2" x 2" ...more
2.34" Pedrazolli #Brown-60-CDB, 2.34" diameter, hydraulic clamp, automatic mandrel extraction, 2000
Machinery Marketing International | Chicago, IL
Category: Circular Saws
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Pedrazolli
Model: BROWN-60-CDB
Year: 2000
Used Pedrazolli Brown 60 CDB. This pre-owned is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Pedrazolli we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us today., Max ...more
10" x 120" Metlsaw #NF10, Fully Automatic CNC Non Ferrous Saw, Allen Bradley CNC Control
Revelation Machinery | Chicago, IL
Category: Carbide, Friction and Cold Saws
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Metlsaw
Model: NF10
Year: 1900
Make: METLSAW, Model: NF-10, Year: 1900, Machine Location: Kansas, Cut Thickness 10”, Nonferrous Metals, Allen Bradley CNC Control, Shuttle Table.
16" x 26" W.F. Wells #M-16-2, Hydraulic Twin-Post Miter Band Saw, 5000 lbs. capacity, 200" x 1.25" Blade, 20" Bandwheel, 60-500 FPM, 7.5 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Horizontal Band Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: W.F. Wells
Model: M-16-2
W.F. Wells 16″ x 26″ Hydraulic “Twin-Post” Miter Band Saw, M-16-2, Inventory # 5839, Model: M-16-2, Made in USA, Capacity:, @ 90°: 16″ x 26″, @ -45°: 16″ x 16″, Weight Capacity: 5,000 lbs., Blade Speed: 60 – 500 FPM, Blade Size: 200″ x 1 1/4″ ...more
9-1/8" Kaltenbach, cold saw, 28" blade diameter, 7.5" square, 9-1/8" round, 1980, #12670
Yoder Machinery Sales | Holland, OH
Category: Carbide, Friction and Cold Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kaltenbach
Model: 28
Year: 1980
SERIAL. 42639, MODEL. KSV-630AK, NEW IN. 1980, DIAMETER OF BLADE. 28", CAPACITY RECTANGLES. 12" X 16", CAPACITY SQUARES. 7-1/2", CAPACITY ROUNDS. 9-1/8", CAPACITY H-BEAMS. 16" X 7", CAPACITY CHANNELS. 15"X 3-3/8", CAPACITY ANGLES. 8" X 8", BLADE SPEEDS. 23.6 TO 78.7 SFPM, AUTOMATIC CLAMPING. YES, AUTOMATIC SPEED & ...more
Wanco WLTT, Light Tower, S/N: R1007877, 2024
Wyoming Machinery - Cat | Gillette, WY
Category: Light Towers
Seller: Wyoming Machinery - Cat
Location: Rock Springs, WY
Mfr: Wanco
Model: WLTT
Year: 2024
& GFI JUNCTION BOX/CORD), 2-INCH BALL HITCH, 240V TWIST LOCK RECEPTACLE, BLOCK HEATER, BATTERY BLANKET, COLD START AID PACKAGE (OIL PAN, KUBOTA D-1005 ENGINE, 350 W, LEDS, 6KW GEN SET, VIN# 5F13D1014R1007877.
24" Metlsaw #CS2-T12, cold saw, non-ferrous, 8"-14" cutting height, 30 HP, 30 cfm @ 80 psi
Southern Fabricating Mchy Sales | Lithia, FL
Category: Carbide, Friction and Cold Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Metlsaw
Model: CS2-T12
24” Non - Ferrous Saw with 24” Backguage Length., Cutting Window: 24”, Cutting Height: 8” - 14”, Backgauge Length: 12’, Cut Length Range: ½” - Unlimited, Motor: 30 HP, Carriage Cutting Speed: 500”/Min, Backguage Reversse Speed: 800/Min, Power: 460/480 @ 80 Amp ...more
Cat 926M QC, Wheel Loader, 3657 hours, S/N: LTE07088, 2019
Wheeler Machinery | Salt Lake City, UT
Category: Wheel Loaders
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Caterpillar
Model: 926M QC
Year: 2019
CAB, DELUXE, CTWT, STANDARD, 763LBS, 2 PCS, DIFFERENTIAL, OPEN REAR, ENGINE AR, ENVIRONMENT, STANDARD, FENDERS, STANDARD, GUARD, POWERTRAIN, LOWER, HYDRAULICS, 2V, CPLR READY, SL, HYDRAULICS, STANDARD, HL, JUMPER LINES, NONE, KIT,SERIALIZED TECHNICAL MEDIA, LANE 2 ORDER, LIGHTS, AUX, HALOGEN, LIGHTS, ROADING, HALOGEN ...more
JUST ADDED!
Marvel Spartan #P150, 6" CNC cold saw, 30-130 RPM, 460mm x 2.7mm blade, 20 HP, Chip Conv., 2017
Myers Technology Co LLC | Elk Grove Village, IL
Category: Carbide, Friction and Cold Saws
Seller: Myers Technology Co LLC
Location: Elk Grove Village, IL
Mfr: Spartan
Model: P150
Year: 2017
High production CNC cold saw, 2.75" to 5.9" Capacity, 20 HP Blade motor, 5 hp Hydraulics, 30 to 130RPM blade, Servo feed blade and 12' Magazine bar loader, CAPACITY: ROUND 2-3/4 x 5.9, SPEED RANGE 30 130 RPM controlled through an Inverter Drive., BLADE 460 mm x 2.7 mm., MOTORS Blade Drive: 20 H.P., Hydraulic: 5 ...more
24" x 22" DoAll #DC-500SA, semi-auto, PLC, 260" x2" x.063" blade, 52-275 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Horizontal Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: DC-500SA
24” x 22″ Band Saw with PLC Control for all Electric and Hydraulic Functions Infinitely Variable Speed Controlled by VFD Hydraulic Retractable Shuttle Vise Material Indexer Rapid and Creep Speed Index Vise Control Multi-Step Full Stroke Vises with Split Front Vise and Variable Vise Pressure Control Spring ...more
Meadows Portable Sawmill, Computer setworks, 225 HP Detroit Diesel
Carolina Machinery Sales | Monroe, NC
Category: Sawmills
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Meadows
Meadows sawmill, New parts from MFG: Saw Arbor, Live belt conveyor, misc parts, Computer setworks, 225 HP Detroit Diesel.
20" x 13" DoAll #2013-V5, high speed contour band saw, 154" band, 550-5500 FPM, new
Southern Fabricating Mchy Sales | Lithia, FL
Category: Vertical Band Saws
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Doall
Model: 2013-V5
20″ x 13″ Band Saw with Variable Frequency AC Drive Band Speed Indicator Band Door Interlocks Band tension Indicator Job Selector One Set of High-Speed, Insert-Type Guide Blocks for Bands 1/8" - 1/2" Chip Pan One Set of Steel Guide Inserts for Bands 1/4", 3/8" and 1/2" Wrench for Saw Guides Wrench for ...more
National Machine Tool #500, band saw
iGAM | Detroit, MI
Category: Vertical Band Saws
Seller: iGAM
Location: Detroit, MI
Mfr: National
Model: 500
Used NATIONAL MACHINE TOOL Bandsaw Model 220. This reliable equipment is ideal for various cutting applications. Built with durability in mind, it's a solid addition to your industrial tools., Spec Sheet, NATIONAL MACHINE TOOL 220, Dimensions. 91X29X52, Weight. 2010 LBS.
17" x 20" W.F. Wells #F-16-3, Hydraulic Twin-Post Band Saw, 5000 lbs. capacity, 200" x 1.5" Blade, 22" Bandwheel, 60-500 FPM, 10 HP, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Horizontal Band Saws
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: W.F. Wells
Model: F-16-3
W.F. Wells 17″ x 20″ Hydraulic “Twin-Post” Band Saw, F-16-3, Inventory # 5830, Model: F-16-3, Made in USA, Capacity:, Round:, @ 90°: 17″, Rectangular:, @ 90°: 17″ x 20″, Weight Capacity: 5,000 lbs., Blade Speed Range: 60 – 500 FPM, Blade Size: 200″ x 1 ...more
Sennerskov #75X140, Feed Through Press, 75" width x 140" L Platen, 75" side, 11-1/2" single daylight, 4" Thick steel platens, (9) Upstroke cylinders
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Sennerskov
Model: 75 X 140
SENNERSKOV Feed Through Hot PressPlaten dimensions: 75" Wide x 140" long, loading on the 75" side, 11-1/2" single daylight. -- 4" Thick steel platens suitable for heating by steam, hot water or hot oil with a maximum operating temperature of 370 F. -- (9) Upstroke press cylinders, with 40 HP hydraulic system motor. -- ...more
18" Pistorius #SC-20-P, pneumatic down-cut cuttoff saw, 1" arbor diameter, 10 HP, 3450 RPM, horizontal clamp, 2000
Ex-Factory | Charlotte, NC
Category: Cutoff Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Pistorius
Model: SC-20-P
Year: 2000
PISTORIUS - SC 20 P: Cutoff Saw w/Horizontal Clamping -- Cuts unlimited lengths of wood profiles; PVC & plastic and aluminum extrusions. : -- 10 HP - 3,450 RPM Double V-belt drive saw motor with: 18" Saw blade cap.; 1" arbor dia.; max. cutting cap. -- Downward (chop) acting cutting stroke; 7-1/2" x 7 1/2" width ...more
Caterpillar 352EW, Crawler Excavator, 1536 hours, S/N: KXH20507, 2024
Ring Power Cat - Heavy Machinery | St. Augustine, FL
Category: Excavators
Seller: Ring Power Cat - Heavy Machinery
Location: 10421 Fern Hill Drive, FL
Mfr: Caterpillar
Model: 352EW
Year: 2024
*352 08 EXCAVATOR, *BEACON SOCKET, *CAB MOUNT, ROPS, *COMMON ARRANGEMENT, *COUNTERWEIGHT STD, 21,605LBS, *COVER, REAR HEADER, *DRINK HOLDER, *ELECTRICAL AR, *ELECTRONICS AR, *ELEK GP-A4063, *ENCLOSURE AR, *FAN, REVERSE, *FILM GP, *FILM, EMC, *FINAL DRIVE, UC, STD FG, *FINE SWING, *GUARD, SWIVEL (FG), *HYDRAULIC AR ...more
Elumatec Elumatic #MGS-105, mitre saw
Investment Recovery Services | Fort Worth, TX
Category: Miter Saws
Seller: Investment Recovery Services
Location: Fort Worth, TX
Mfr: Elumatec
Model: MGS-105
Elumatic MGS 105/01 Mitre Saw : The universal saw for special applications The reliable elumatec principle “Cutting from below”: Free access to the table surface for optimal loading and unloading of profiles The patented saw arm suspension creates a cutting pressure towards the back fence which ensures ...more
Elumatec #SBZ-628-S, profile machining center, Beckhoff drive Control, lifting station, 2020
Blumberg Machinery Co | Bannockburn, IL
Category: CNC Profilers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Elumatec
Model: SBZ-628-S
Year: 2020
ELUMATEC SBZ-628-S PROFILE MACHINING CENTER, New 2020, SBZ 628 S: Pass-Through System for Windows, Doors and Curtain Walls., Four Spindles for Routing or Drilling, Separating Cuts from -45° to 90° (Lead Cut), from 90° to 45° (end cut) Continuously Adjustable., Machine Configuration:, Left loading ...more
Mereen Johnson #424-DC, Straight Line Multiple Rip Saw, 24" arbor, 6" throat, 75 HP, 3600 RPM, TEFC, 3 HP, 30-245 FPM feed, New
RT Machine | Hughesville, PA
Category: Straight Line Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen Johnson
Model: 424-DC
Mereen-Johnson Model 424-DC Straight Line Multiple Rip Saw Capacity: Arbor space 24" thickness to 3-1/2" using 14" diameter tooling 30" Minimum length glue joint accuracy 6" Throat Arbor Drive: 75HP, 3600RPM, TEFC Feed Drive: 3HP, TEFC Heavy duty direct coupled feed drive assembly with variable frequency drive, Feed ...more
Multitek #2040XP, Firewood Processor, shuttle grapple, 30' conveyor, 60" carbide tipped circle saw, 2015
Carolina Machinery Sales | Monroe, NC
Category: Woodworking - General Machines
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Multitek
Model: 2040XP
Year: 2015
Multitask 2040XP Firewood Processor, John Deere 125 HP Diesel, Shuttle Grapple, 30' Conveyor, 60" Carbide tipped circle saw (new teeth), 6 & 8 Way wedges, 4-Leg live deck, Max log length 40', Max log diameter 23", 35 Ton Splitter.
Caterpillar PC205 COLD PLANER, Cold Planer, S/N: RBG00401, 2007
Milton Cat - Heavy Machinery | Milford, MA
Category: Cold Milling Machines / Planers
Seller: Milton Cat - Heavy Machinery
Location: Clifton Park, NY
Mfr: Caterpillar
Model: PC205 COLD PLANER
Year: 2007
18" OVERALL DRUM WIDTH, 68" OVERALL WIDTH, CATERPILLAR PART NUMBER 246-7315, CATERPILLAR PC205 COLD PLANER, For XPS machines run in Standard Flow with case drain., REQUIRES: High Flow Hydraulics or Standard Flow with case drain connection and min flow of 80 l/min (21 gpm)., SOLD AS IS.
Pertici #Univer-402IP, double head traveling miter saw, #75312
Yoder Machinery Sales | Holland, OH
Category: Miter Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pertici
Model: UNIVER-402IP
SERIAL. 11T140, MODEL. 402I9, YEAR NEW. 2011, NUMBER OF CUTTING HEADS. 2, CUTTING DIAMETER. 5.90551", CUTTING LENGTH. 137.7953", DIAMETER OF BLADE. 15.748, BLADE SPEEDS. 3190 RPM, MITER CUTS. 0 TO 45 DEGREES, BLADE FEED. PNEUMATIC, CLAMPING. PNEUMATIC, SAW BLADES HEADS TRAVEL. BACK & FOURTH, MOTORS HORSEPOWER. ...more
Dependable Foundry #200, shell core machine
FL Sales Inc | Solon, OH
Category: Shell and Cold Box Core Machinery
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Dependable
Model: 200
Bacci #TTF-1, Miter/Mortise/Tenon Door Machine, 45 deg miter frame door production, 3 HP w/400 mm blade diameter, 7-1/2 HP shaper, 60 mm boring depth, 1998
Ex-Factory | Charlotte, NC
Category: Woodworking Moulders
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Bacci
Model: TTF 1
Year: 1998
BACCI TTF1 T2M Cabinet Miter Door Machine Cutting boring and moulding machine, designed for 45 miter frame door production, with each cycle the parts are trimmed drilled and finger jointed; single sided cutting-boring-molding machine. : -- Hydraulic control of table stroke; ball bushing and ground and hardened guides ...more
Dependable Foundry #100, shell core machine
FL Sales Inc | Solon, OH
Category: Shell and Cold Box Core Machinery
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Dependable
Model: 100
Gaylord #G75, core machine gas generator
FL Sales Inc | Solon, OH
Category: Shell and Cold Box Core Machinery
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Gaylord
Model: G75
14" OMGA #T-53-370, coumpoung miter saw, manual, free-standing, 4 HP, 3200 RPM, 1" diameter arbor, 4-5/16" x 6-3/4" cut at 90 degree, 4-5/16" x 4-3/4" at 45degree, 2026, new
Ex-Factory | Charlotte, NC
Category: Miter Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: T-53-370
Year: 2026
OMGA T 53-370 Precision Compound Miter Chop Saw (Manual)This precision saw is a multi purpose machine suitable for use in carpentry, for cutting moulding, picture frames, furniture components and any application requiring precision cutting. & s: -- Manual Cutoff Miter Saw, free-standing on its own base (optional ...more
Caterpillar D6K2LGPARO, Crawler Dozer, 10961 hours, S/N: RST01150, 2015
Fabick Cat | Fenton, MO
Category: Crawler Dozers
Seller: Fabick Cat
Location: Madison, WI
Mfr: Caterpillar
Model: D6K2LGPARO
Year: 2015
****ATTACHMENTS PICTURED ARE****, ***BE INCLUDED IN THE PRICING***, **SUBJECT TO CHANGE AND MAY NOT*, ACCUGRADE READY, CAB, ANTIFREEZE, -50C (-58F), BLADE, 145 IN. ARO LGP, CAB, STANDARD, CATERPILLAR PRODUCT LINK 522, COLD WEATHER, 120V, PACKAGE, COMPLETE STORAGE PROTECTION, D6K2 LGP TRACTOR, D6K2 LGP TRACTOR, DCA-6 ...more
JUST ADDED!
16" x 20" W.f. Wells #F-16-1, semi-auto twin-post horizontal bandsaw, 1.25" x .042" x 15 blade, 60-425 FPM, manual blade tension w/ indicator, 8.5" vise
Machinery Central | Louisville, KY
Category: Horizontal Band Saws
Seller: Machinery Central
Location: Louisville, KY
Mfr: W.F. Wells
Model: F-16-1
, New 2018, the WF Wells F-16-1 is a semi-automatic, twin-post horizontal bandsaw designed for heavy-duty cutting., Spec Sheet:, Machine :, Capacity:, Rectangular at 90 16 High x 20 Wide, Round at 90 16 Diameter, Rectangular at 45 16 High X 9 Wide, Round at 45 9 Diameter, Weight Capacity: 5,000 lbs, Blade Speed: ...more
9" x 18" W.f. Wells #W-9, horizontal band saw, 1" x .035" x 11' 6" blade, 60-300 FPM, twin post, coolant
Yoder Machinery Sales | Holland, OH
Category: Horizontal Band Saws
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: W.F. Wells
Model: W-9
SERIAL. 782782, MODEL. W-9, CAPACITY AT 90 DEGREES. 9" X 18", CAPACITY AT 45 DEGREES. 9" X 8", BLADE SPEED. 60 TP 300 FPM, WEIGHT CAPACITY. 2000 LBS, SAWING FORCE. 30 TO 120 LBS, BLADE SIZE. 1" X.035 X 11'6", HEAD RAISE TIME. 16" IN 18 SECONDS, HEAD LOWER CYCLE TIME. 16" IN 12 SECONDS, TWIN POST. YES, WORK HEIGHT. ...more
Cat 930M, Wheel Loader, 3975 hours, S/N: F5K00572, 2020
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Wheel Loaders
Seller: N C Machinery Co. - Heavy Machinery
Location: Great Falls, MT
Mfr: Caterpillar
Model: 930M
Year: 2020
ANTIFREEZE, -50C (-58F), CAB, DELUXE, CAMERA, REAR VIEW, CTWT, HEAVY, 2668LBS, 5PCS, DIFFERENTIAL, OPEN REAR, ENG SN J7A02394 MSO 9KVWS, Engine, ENVIRONMENT, STANDARD, FENDERS, EXTENDED COVER, GUARD, POWERTRAIN, LOWER, HYDRAULICS, 3V, CPLR READY, SL, HYDRAULICS, STANDARD, JUMPER LINES, AUX 3RD, FUSION, KIT,SERIALIZED ...more
Biesse Selco #WN-6, Front Loading Panel Saw, 10.5' overall, 20 HP, 524 FPM, OSI+WRT Control, 2022
Carolina Machinery Sales | Monroe, NC
Category: Panel Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Selco
Model: WN-6
Year: 2022
, 126" (3,200 mm) Overall cutting length, 126" (3,200 mm) max. pusher stroke for crosscutting,3.7", (95 mm)Maximum saw blade projection), 20 HP (15 kW) Main & 3 HP (2.2 kW) scoring motor., Saw Carriage:, Variable saw carriage travel speed from 1 - 524 FPM (1 - 160 MPM). "DigiSet" scoring blade adjustment from the ...more
RMT #S-SMART-CS-24-42, automatic horizontal bandsaw, new
Revolution Machine Tools Inc | North Salt Lake, UT
Category: Horizontal Band Saws
Seller: Revolution Machine Tools Inc
Location: North Salt Lake, UT
Mfr: Rmt
Model: S-SMART-CS-24-42
The Revolution Machine Tools™ S-SMART™ CS 24-42 Automatic Column Type Straight Cutting Bandsaw has a cutting capacity of 24” x 42” in 90° flat cuttings and Ø24” in round material., The S-SMART™ CS 24-42 Bandsaw comes standard a NC control panel, blade brush, double action ...more
Cat 930M, Wheel Loader, 5478 hours, S/N: F5K00574, 2020
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Wheel Loaders
Seller: N C Machinery Co. - Heavy Machinery
Location: Williston, ND
Mfr: Caterpillar
Model: 930M
Year: 2020
ANTIFREEZE, -50C (-58F), CAB, DELUXE, CAMERA, REAR VIEW, CTWT, HEAVY, 2668LBS, 5PCS, DIFFERENTIAL, OPEN REAR, ENG SN J7A02392 MSO 9KVWT, Engine, ENVIRONMENT, STANDARD, FENDERS, EXTENDED COVER, GUARD, POWERTRAIN, LOWER, HYDRAULICS, 3V, CPLR READY, SL, HYDRAULICS, STANDARD, JUMPER LINES, AUX 3RD, FUSION, KIT,SERIALIZED ...more
Cold Cold Jet #Aero-30, Dry Ice Blasting Machine, 140 max psi, 1.5 or 3 lbs/min feed rate, 30 lbs hopper, 50-150 CFM @ 80 psi, 100-120 V, 2005
Genemco | Hearne, TX
Seller: Genemco
Location: Hearne, TX
Mfr: Cold Jet
Model: AERO-30
Year: 2005
Cold Jet, LLC Dry Ice Blaster. Model: AeRO30. S/N: 61L2-F-560. Year: 2005. Assembly no.: 2A0150. Portable, compact, and lightweight single nozzle cleaning system. Pneumatic blast pressure (140 max PSI). Fixed dry ice feed rate: 1.5 or 3 lbs per minute. Hopper capacity 30 lbs. Nozzles can be changed to match a specific ...more
JUST ADDED!
Ligna, 2-saw Edger, 6" x32", infeed & tailing belt
Carolina Machinery Sales | Monroe, NC
Category: Board / Wood Edgers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Ligna 6" x 32" 2-saw Edger, 2-Moveable Saws, 8' Infeed rollcase, 20' Tailing belt, Hydraulic setworks, 2-Line laser system, The first photos shown are of the system installed. The resaw has been dismantled and ready to load, as shown in the last photos.
2.34" Pedrazolli #Brown-60-CDB, Tube Bender, 1.5" Square Tooling, 11.5 HP, 230/480 V, 2000
Machine Tool Bids | Chicago, IL
Category: Circular Saws
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Pedrazolli
Model: BROWN 60 CDB
Year: 2000
Used 2000 Pedrazolli Brown 60 CDB. Machine Tool Bids offers plenty of and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Pedrazolli Brown 60 CDB or any of our machines., MACHINE, Max Diameter: 2.34", Tooling: 1-1/2" Square.
JUST ADDED!
Caterpillar D6K2 LGP, 8698 hours, S/N: EL703294, 2019
Fabick Cat | Fenton, MO
Category: Crawler Dozers
Seller: Fabick Cat
Location: De Pere, WI
Mfr: Caterpillar
Model: D6K2 LGP
Year: 2019
*** FTS USED KIT SMU00080, ****ATTACHMENTS PICTURED ARE****, ***BE INCLUDED IN THE PRICING***, **SUBJECT TO CHANGE AND MAY NOT*, A QUOTE ***, AIR CLEANER, STANDARD, ANTIFREEZE WINDSHIELD WASHER, BLADE, 145" ARO LGP, CAB COMFORT PACKAGE, COLD WEATHER, 120V, PACKAGE, CONTROL, ARO W/ASSIST, COUNTERWEIGHT, REAR ...more
Wanco WLTT, Light Tower, S/N: R1007873, 2024
Wyoming Machinery - Cat | Gillette, WY
Category: Light Towers
Seller: Wyoming Machinery - Cat
Location: Rock Springs, WY
Mfr: Wanco
Model: WLTT
Year: 2024
& GFI JUNCTION BOX/CORD), 2-INCH BALL HITCH, 240V TWIST LOCK RECEPTACLE, BLOCK HEATER, BATTERY BLANKET, COLD START AID PACKAGE (OIL PAN, KUBOTA D-1005 ENGINE, 350 W, LEDS, 6KW GEN SET, VIN# 5F13D1017R1007873.
