go to top
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠

Cam-Wood #CS-18AAT-16/EM-300, End Matcher w/Optimizing Cutoff Saw, 12" width, 10.5" min. L, 300 FPM feed, (2) 5.5 HP spindle, 1.57" spindle diameter, 2026, new

Manufacturer: Cam-Wood
Year: 2026
Stock # EM-300007
Price: $92,900 USD

For Sale by Ex-Factory

Surplus Record Dealer Since 2022
Gold Level Dealer
Location: Charlotte, NC
Contact Sales Dept.
Let the seller know you found their listing on Surplus Record!
$92,900 USD
Finance for as low as $1,884/mth financing info

Description

CAM-WOOD 16' Pusher Type Cutoff Saw with Crayon Marking (Optional) connected to a CAM-WOOD 12" wide End Matcher;

System width capacity is 12" with a maximum inbound board length of 16' (as priced here). 8' and 12' Saws are also available. Call Jeff for price deduction.

General Data:

  • Cut-Off Saw is arranged to remove defects from Clear. Will chop for random length clear material OR optimize clear wood according to your cutlist, delivering either to the End Matcher.
  • The line requires (1) man to mark and feed the Cutoff Saw and (1) man to offbear and stack finished work coming from the End Matcher.

    Price includes the following equipment and specifications:

    Defect Saw Features:
  • 18" CAM-WOOD Model CS-18AAT-16' Automatic Cut Off Saw equipped with Automatic Pusher for increased automation and efficiency
  • 16' Infeed table
  • Works as an automatic pusher for defect removal and fixed length cutting when crayon marking (optional)
  • PLC controlled automatic pusher device is driven by servo motor at feed speeds up to 200 FPM

    Automatic Pusher Operation:
  • Operator places crayon marks at the leading and trailing ends of a defect or waste zone (Optional)
  • Pusher moves the board to the first crayon marked defect, automatically completes the cutting cycle, and continues to position and chop the board at each crayon mark, thereby removing all waste zones. When the board is finished, the pusher returns to its starting position at top speed and starts on the next board
  • Super Pusher travels up to 200 FPM
  • Sealed, long-life ball bearings
  • Precision ground cast iron table with heavy metal stand
  • Easy to operate in all operations
  • Saw blade comes up from beneath the table and returns after cutting for safe operation
  • Totally enclosed blade guard prevents danger during cutting cycle
  • Includes magnetic starters with overload protection

    Cutting & Other Specifications:
  • (45) Strokes/Min
  • 18” Saw Blade Diameter with 1” Saw Arbor
  • 10 HP Arbor Motor
  • 3,200 RPM Blade Speed
  • 90 PSI Compressed Air requirement with 1" Inlet
  • (1) 4” Dust Hood
  • Machine Size (W x L), 30" X 28-1/2'

    Automatic Transfer between Defect Saw and End Matcher

    CAM-WOOD SFJ -300 End Matcher with the following Specifications:

  • Machines tongue and groove at ends of random or fixed length boards as provided by the Defect Saw
  • Includes powered conveyor for infeed and steel landing table at the outfeed
  • Air operated hold downs keep material firmly in place during the machining process
  • Cutter heads move in and out while cutting a tongue on the trailing end of one part and a groove on the leading end of the following piece

    Features:
  • PLC controls combined with touch-screen for maximum convenience of operation
  • Each cutter head is powered by a separate motor driving the spindles at 7,500 RPM
  • Accepts unlimited wood lengths via an automated conveyor for infeed and outfeed
  • Cutterhead travel thru the wood is controlled by a VFD which permits automatic speed changes to suit various conditions (faster for softwood, slower for hardwood, etc.).
  • Pressure plates are actuated by air cylinders
  • Hard chrome-plated table for maximum wear resistance
  • Table rollers increase feeding smoothness
  • Powered infeed roller conveyor is driven by a 1 HP motor
  • 134" Infeed roller conveyor and 86-1/2" landing table is included
  • Fully enclosed chip guards
  • Air-operated clamp holds stock firmly in place. After work piece is clamped, cutter heads move in as they perform the shaping
  • Spindles are precision constructed to cut accurately and smoothly
  • Spindle height adjustment is displayed on a dial gauge
  • CAM-WOOD’S 2-spindle design accommodates cutterhead diameters up to 6"
  • When end matching, one spindle cuts the tongue and the second cutterhead machines the groove

    Specifications:
  • 1-1/2" To 12" width cap
  • 10-1/2” Min. to unlimited length capacity
  • Material feed speeds up to 300 FPM
  • Cutterhead travel speed is up to 80 FPM
  • With (2) 5-1/2 HP spindle motors and a 2 HP feed motor
  • 1/2 HP VFD motor for powering in & out cutterhead travel
  • 40 mm (1.57”) diameter spindle
  • Requires 1,300 CFM dust collection

    Option available:
  • AF-MAG feed magazine for cutting saw: $4,490
  • AFT-OPT Crayon reader, tracer function: $ 6,250

Inquire Further with Ex-Factory!

Buyers Who Viewed This Listing Also Viewed:

Cantek #EM12, end matcher, 1.6"-12" width, 0.4"-1.38" thick, 12" min length, 295 FPM, (2) 10 HP cutterheads, 230/460 V., 3 Ph., 2025

Category: End Matchers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Cantek
Model: EM12
Year: 2025
Continuous through feed end matcher producing tongue and groove on flooring & paneling Capacity Width 1.6" - 12" Thickness 0.4" - 1.38" Min Length 12" Max Length Unlimited Feed Feed Speed max. 295 FPM Cutting Speed – approx. throughput 77 FPM (Based on 6.5' board) Powered Infeed Table - Std. 173" ...more

Doucet #End-Pro-8, End Matcher, 8" capacity, Yaskawa VFD, 240/460 V., 3 Ph.

Category: End Matchers
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Doucet
Model: END-PRO-8
Doucet End Pro 8” end matcher, Model: End-Pro 8”, Serial #: 2005-02-110, 460/240 volt? 3phase, Yaskawa VFD., Demonstration video available, Contact us for pricing, additional photos & freight rates..

Friulmac #Randomat-E, End Matcher, 1-3/16" to 9-7/8" width, 3/8" to 1-3/16" thick, (2) 5.5 HP, 2002

Category: End Matchers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Friulmac
Model: RANDOMAT-E
Year: 2002
2002 Randomat E Endmatcher, Manufacturer′s, Working cap.: width 1-3/16" to 9-7/8"; thickness 3/8" to 1-3/16" and length 7" to, Feed: (2) 5.5 HP motors for infeed and out feed 10" x 120" belt conveyors. Positioning motor (2) 1.5 HP to shaper heads for tongue and groove. Sensor activated stops for true cut ...more

Share