Buy or Sell Your Wide Belt Sander
Recommended Categories for wide belt sander
AI-ranked results for wide belt sander - closest matches first
Timesavers #3121-13-04-Lynx, Finishing Machine, Wet Combination Belt/Brush, 6" diameter Drum & Brush, 60" L Disc, 15-45 FPM, 20 HP, 460 V, 2008
HGR24 | Euclid, OH
Category: Finishing Machines
Seller: HGR24
Location: Euclid, OH
Mfr: Timesavers
Model: 3121-13-04 LYNX
Year: 2008
Inventory No. 0424-008-0003 Manufacturer Timesaver Model No. 3121-13-04 LYNX Name Finishing Machine Arrival Date 08-15-2024 Dimensions L x W x H (inches) Unavailable Capacity 37" Weight (lb.) 1 Category Finishing Condition Used Available Quantity 1 Serial No. 31072 Make Year 2008 Item "3100 Series" “wet” ...more
Compositech #4612, belt filter press, Automatic belt steering, Stainless Steel frame Remanufactured
D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Remanufactured belt filter presses, - 2 units available, - Weighted rollers, - Shaft mounted gear motor, - Vacuum pan, - Drain pans, - Automatic belt steering, - EPDM main drainage belt: 95% of new condition, - Large capacity feed box, - Stainless steel frame, - New drive motor, - All new seals, bearings, slide ...more
18" x .187" Automatic Feed #5-418, coil straightener, 5 straightening rolls, 10 HP, #54744
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Automatic Feed
Model: 5-418
SERIAL. 3335, MODEL. 5-418, COIL WIDTH. 7" MINIMUM TO 20" MAXIMUM, COIL CAPACITY.060 MIN TO.125 @ 18" WIDE, COIL CAPACITY.060 MIN TO.187 @ 7" WIDE, STRAIGHTENER SPEED. 0 TO 1200 IPM, ENTRY PINCH ROLLS. YES, EXIT PINCH ROLLS. YES, DIAMETER OF PINCH. 5", NUMBER OF STRAIGHTING ROLLS. (5) 2 OVER 3, HYDRAULIC LIFT ...more
Omega Design #3D-JH, Capacity Sorter/Unscrambler, 4" diameter, 30" x 38" x 30" deep hopper, 12" width x 10' L belt, 8' H discharge
Machinery & Equipment Co | Brisbane, CA
Category: Cap Sorters
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Omega Design
Model: 3D-JH
Omega cap sorter, unscrambler, model# 3D-JH, serial# 85-1781, set up for approximately 4" diameter caps. Complete with cap elevator including 30" x 38" x 30" deep stainless steel hopper and inclined cleated belt conveyor, belt measures 12" wide X 10' long with 2" high cleats, 12" spacing between cleates, 8' ...more
30000 lb. U.S. Motors Machines, cradle/straightener/feeder, Complete Line, 30" x .38" stock, 72" OD, (7) 4" diameter roll
Rygate, LLC | Clarkston, MI
Category: Coil Feed Lines
Seller: Rygate, LLC
Location: Clarkston, MI
Mfr: U.S. Motors
Coil weight capacity: 20,000 Lbs., Coil width capacity: 30", Stock thickness capacity:.150 @ 30" Wide, Stock thickness capacity:.250" @ 24" Wide, Stock thickness capacity:.300" @ 12" Wide, Max stock thickness capacity:.380" x 10" Wide 45,000 Yield), Max stock thickness capacity:.380" x 03" Wide 90,000 Yield), Coil ...more
Roschermatic #RQ-SVM-S1100, horizontal vacuum packager, 7" x 45" belt, high-end vacuum pumps, 2000 m3/hr., 1997
Genemco | Hearne, TX
Category: Miscellaneous Packaging Equipment
Seller: Genemco
Location: Hearne, TX
Mfr: Roscher
Model: ROSCHERMATIC #RQ-SVM-S1100
Year: 1997
1997 Roscher Horizontal Vacuum Packager. Model RQ-SVM-S1100. S/N: 6.080.0024. High end vacuum pumps of 0.5 mbar. Volume from 160 m. cub./hr up to 2,000 m. cub./hr, high speed machine for all kind of products and bag material, rust proof, complete stainless steel, progRam Industries memory for 8 complete settings ...more
36" wide x 20' long, Plastic Mesh Belt Conveyor, food grade, 2 HP, 1660 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Plastic Mesh Belt Conveyor, 36" x 20' - S-turn conveyor with food-grade design. Powered by a 2 HP, 230/460V, 1660 RPM variable speed motor. Mounted on a stainless steel frame., HP: 2, Type: S-Turn Conveyor, Measurements: 36" Wide X 20' Long, Materials of Construction: Stainless Steel, Previous Use: Food ...more
Clearing #S4-500-186-108, Blanking Line, 500 ton, 12" stroke, 48" Shut Height, 20" adj, 10-50 SPM, 186" x108" bed
VX Machinery | Sylvania, OH
Category: Blanking Lines
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Clearing
-Tonnage: 500 tons, -Bed Size: 186'' x 108'', -AFCO Feedline: 72’’ x 75,000 lb, -AFCO Washer: 72’’ Wide, -ECI Oiler: 72’’ Wide, Press, -Model: S4-500-186-108, -Stroke: 12’’, -Shut Height: 48’’, -Adjustment: 20’’, -SPM: 10-50 ...more
Pecan processing plant, 40000 lb/hr (wet end)
Perry Videx LLC | Hainesport, NJ
Seller: Perry Videx LLC
Location: Hainesport, NJ
Pre Cleaner, ~ Phelps Trailer Lift 46' Long x 10' Wide, Complete with Hydraulic Lift Pump Power Supply, Gantry Trailer Electric Lift Hoists, 2 Slides, 4 Winches, ~ 12' Long x 14' W x 6' Deep Dump Pit with Tiger Bars, 32" W x 37' L Elevated Cleated Rubber Belt Pit Conveyor 7.5/5.5-HP Electric ...more
8' -19" Cincinnati Bickford #6E, super service radial drill, #6MT, 72" height under arm, power clamp, power rapid traverse
Excel Machinery | Clinton Township, MI
Category: Radial Drills
Seller: Excel Machinery
Location: Clinton Township, MI
Mfr: Cincinnati
Model: 6E
Cincinnati Bickford 8’ x 19” Super Service Radial Drill, Model: 6E Serial # 6E-860, Capacity: 5/8” – 4”, Arm Length: 8’, Column Diameter: 19”, Height Under Arm: 72”, Spindle Taper: No. 6 MT, Spindle Speeds: 8 – 1000 RPM, Spindle Feeds:.0240 -.125 IPM, Spindle Tapp ...more
AEM, 36" Widebelt Sander
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Aem
AEM 36" Sander.
24" wide x 9.6' long, Stainless Steel Belt Conveyor, Adjustable height w/ caster feet and 12" x 18" magnet
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Stainless Steel Belt Conveyor. 24 in. W x 9 ft. 6 in. L. Adjustable height with caster feet and 12 in. x 18 in. magnet.
30" wide x 10.1' long, Stainless Steel conveyor belt, neoprene belt powered by a 5 HP drive
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
Stainless steel, 30" wide x 130" long, conveyor. a 30" wide x 130" long Neoprene belt powered by a 5 hp drive. Mounted on casters and leveling pads with an infeed / discharge height of 36"., OAD: 130"L x 66"W x 44"H.
30" Max #30DVS, disc & spindle sander, 30" discs, 5 HP drive, vertical sanding spindle 1.5 HP drive
Century Machinery Co | Los Angeles, CA
Category: Disc Sanders
Seller: Century Machinery Co
Location: Los Angeles, CA
Mfr: Max
Model: 30DVS
MAX 30 inch DISC SANDER and SPINDLE SANDER Model 30DVS, Serial Number 94308, CAPACITY:, DISC SANDER: Model 30-SD, Diameter 30", Table:, Working Surface,15"FB x 38½" LR, Plus 3¾" x 7¼" projection beyond disc., Tilting 30 degrees Up ...more
Skinetta #ASK450, automatic, intermittent motion, shrink bundler & tunnel, 20-30 cycles per minute
Frain Industries | Carol Stream, IL
Category: Shrink Tunnels
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Skinetta
Model: ASK450
Skinetta, Model ASK 450, automatic, intermittent motion, shrink bundler and tunnel. Rated from 5 to 30 cycles per minute – depending on materials, application, pack pattern and machine configuration. Product size range: 1" to 10" in Length; 1" to 12" in Width; up to 10" in Height. a ...more
Carruthers #AdvantEdge-50002, Dicer/Slicer, 12" and 20" width Belt, 25 deg. F, 1/8"-3" Slicing, 5000 lb./hr., 40 FPM, 480 V, 2009
Revelation Machinery | Chicago, IL
Category: Industrial Food Cutters and Slicers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Carruthers
Model: ADVANTEDGE-50002
Year: 2009
Make: Carruthers, Model: AdvantEdge 50002 Dicer/Slicer, Year: 2009, Machine Location: Upon Request, Belt Width: 12″ and 20″ available, Temperature Range: 25°F to fully cooked from the oven, Slicing Range: 1/8″ – 3″, Capacity: Over 5,000 lbs/hr, Maximum Belt Speed: 40 ft/min, 480V ...more
5-3/4" wide x 21" & 25" long, Compact Stainless steel belt conveyors, flat rubber belting (2 available)
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Lot of (2) stainless steel belt conveyors, each 5-3/4" wide with flat rubber belting. One conveyor measures 21" long and the other 25" long. Both units are mounted on independent stainless steel stands and include undermounted drive assemblies. Previously operated on 220 volts in a vitamin gummy processing and ...more
37" x 75" Cemco #2000, Single Head Sander, 1- 5" roller top, 2 - 5" rollers bottom, 2004
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Sanders
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Cemco
Model: 2000
Year: 2004
Cemco 2000 Wide Belt, Fair/good condition., It starts and runs until we unplugged it 12 years ago, Belt size 37 x 75, 2004, Single head, 1- 5” roller top, 2 - 5” rollers bottom, 1 rubber covered, 1 steel. No platen, Thickness ¼” – 6”, 2179 hours on machine, 230 V, 60 CY, 3 PH ...more
52" Timesavers #2321-45-66, Segmented Widebelt/Polisher, 2-Head, 5" thick, 15-45 FPM, 6500 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2321-45-66
Timesavers Model 2321-45-66 Two Head 52" Segmented Widebelt/Polisher : Abrasive belt size: 52 x 103" Main motor first head: 30HP Main motor second head: 25HP Maximum width stock: 51" Minimum part size: 6" x 6" w/vacuum bed Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45FPM Approximate full ...more
Goring Kerr, metal detector, 15.75" x 6.5" Tektamet conveyor, 115 V., 1-phase, PLC controller, #17897
JM Industrial LLC | Millwood, WV
Category: Metal Detectors
Seller: JM Industrial LLC
Location: Millwood, WV
Mfr: Goring Kerr
Used Goring Kerr Metal Detector Tektamet Conveyor - 15.75" X 6.5", 14"W X 6' long belt vinyl food grade belt (right to left operation), 15.75" X 6.5" aperture, Approx. 33" belt height, Pneumatic operated reject paddle, Stainless steel frame, PLC controller, 1/4HP chain drive, 115V single ...more
Cincinnati No. 107-4, centerless grinder, 4" Infeed work rest, 16" diameter & 9" diameter wheels capacity, 7.5 HP, 1954
GCH Machinery | Warren, MI
Category: Centerless Grinders
Seller: GCH Machinery
Location: Warren, MI
Mfr: Cincinnati
Year: 1954
Cincinnati #107-4 Centerless Grinder, 16" OD Grinding Wheel, 4" Infeed Workrest W/ Kicker, Attached Electrical, #107-4 CINCINNATI CENTERLESS GRINDER, S/N 1M1H6B-12 YEAR: 1954, STANDARD CATALOG, CAPACITY, Infeed work rest. 0" to 1 1/2 dia., Thru feed work rest. 0" to 1 1/2 dia., (Work rests not included as standard ...more
12" wide x 25' long, Stainless Steel Belt Conveyor, (2) 90 deg. Turns, 1 HP, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel belt conveyor, belt measures 12" wide x approximately 25' linear feet (20' of straight run and (2) 90 degree turns. Belt driven by Nord 1 HP, 230/460 V motor. Includes stainless steel frame with guide rails. Previously moving boxes of nasal spray., HP: 1, Type: 90 Degree Turn, Measurements: 12" ...more
Butfering Steelmaster #Prima-W309RTT, metal grinding machine, 2003
Pearl Equipment Co | Nashville, TN
Seller: Pearl Equipment Co
Location: Nashville, TN
Mfr: Butfering
Model: PRIMA-W309RTT
Year: 2003
BUTFERING STEELMASTER METAL GRINDING MACHINE, MODEL PRIMA W 309 RTT, ABRASIVE BELT WIDTH | 950MM, WORKING HEIGHT | 950MM, WORKPIECE THICKNESS | 0.5-120MM, ABRASIVE BELT WIDTH | 970MM, ABRASIVE BELT LENGTH | 1900MM, FIRST DRIVE (ABRASIVE BELT), ABRASIVE BELT DRIVE | 12.5/16KW, ABRASIVE ...more
Compositech #4630, belt filter press, 135 sq.ft., 60" belt, 36.5' long, 20 HP total, 300 GPM, Nash vacuum pump
D'Angelo International | Bellingham, WA
Category: Belt Filters
Seller: D'Angelo International
Location: Bellingham, WA
Mfr: Compositech
- Horizontal belt filter press, - 135 square foot filtration area, - 60 in belt, 36.5 ft long, -20 HP total, - Requires 40 GPM at 50 PSI water, - Requires 2 CFM at 100 PSI air, - 300 GPM design capacity, - Gear reducer, 59:1 reduction ratio, Nash vacuum pump:, - 400 RPM, - 150 HP 1,180 RPM and 460V, - 12 inch motor ...more
4" Scotchman #AL100U-02, Tube & Pipe Notcher/grinder, 3420 RPM, 98.4 FPS
Smith Machinery Co | Ames, IA
Category: Tube and Pipe Benders
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Scotchman
Model: AL100U-02
DIMENSIONS ------------ 59 in X 47 in X 19-1/2 in, BELT ------------------ 4 in X 78-3/4 in, MOTOR ----------------- 4 HP (230V/460V, 3PH OR 230V, 1PH), SPEED ----------------- 3420 RPM., BELT SPEED ------------ 98.4 FEET PER SECOND, GRINDING CAP ---------- 3/4 in TO 3 in O.D., ANGLE RANGE ----------- STRAIGHT = 90?? ...more
Fitzpatrick #D6A, compact, on-wall design, 316 Stainless Steel construction, hammer mill, 12" long x 12" wide x 24" deep product hopper, (16) fixed Stainless Steel knife / impact blades
Frain Industries | Carol Stream, IL
Category: Pulverizers and Hammermills
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Fitzpatrick
Model: D6A
Fitzmill, Model D6A, compact, on-wall design, 316 stainless steel construction, hammer mill with production rates per hour – depending on materials and application. 12" long x 12" wide x 24" deep stainless steel product feed hopper 2½" OD stainless steel vari speed metering feed screw ...more
16" wide, Ambaflex #SV400-1300, Spiral Conveyor, 17' T, bottom to top
Aaron Equipment Co | Schaumburg, IL
Category: Belt Conveyors
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Ambaflex
used- ambaflex model sv400-1300 spiral case conveyor. single belt, 16" (400mm) wide. approximately 17' tall. (6) 360 degree turns. g configuration. approximate 5'-7" square footprint. last used in nutritional drink filling operation. serial# 023 564. feeds product from bottom to top.
3.5" HPM, Extruder, 11" Belt, 100 HP, 30:1 L/D, air-cooled
Arlington Machinery | Lake Zurich, IL
Category: Extruders
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Hpm
Used 3.5" HPM Extruder, Model 3.5"" Prodex 30.1 30:1 L/D Ratio, Air Cooled Barrel 13.88:1 L/D Ratio, Flender SZNE 250 Gearbox Rated To 325 HP Belt Driven, 1.22:1 Belt Ratio, 9" Drive Belt, 11" Driven Belt 100 HP AC Reliance Motor And Reliance GV3000/SE Inverter Drive Unitized Control Panel, 5 Barrel Zones, 10 Barrel ...more
12" wide x 6.11' long, LLC Multi-Conveyor, 1 HP
Genemco | Hearne, TX
Category: Belt Conveyors
Seller: Genemco
Location: Hearne, TX
Mfr: Llc
Multi-Conveyor, LLC Conveyor. Conveyor Size: 12W x 83 L. Marsh Patrion Plus Controls. Driven by 1 Hp Sew-Eurodrive.
12" wide x 17' long, Hytrol conveyor belt, 1/2 HP drive
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Hytrol
Hytrol, belt conveyor a 12" wide x 204" long belt powered by a ½ hp drive with a 22" infeed / discharge height., OAD: 204"L x 24"W x 41"H.
WeighPack, Wraparound Labeling Machine, single head, 8" belt, Stainless Steel, 120/240 V.
Aaron Equipment Co | Schaumburg, IL
Category: Labeling Machines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Weighpack
used- weighpack single head wraparound labeler, model single head wraparound. stainless steel construction. has single head label applicator with wrap station. approximately 8" wide belt. mounted on casters. 3/60/240v.
FMC Link-Belt tote dumper, hydraulic, 52" W opening, includes rollers with 50" W rollers (2 available)
Machinery & Equipment Co | Brisbane, CA
Category: Dumpers and Drum Dumpers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fmc
(2) FMC Link-Belt tote dumper, 52" wide opening, includes rollers with 50" wide rollers, dumper is hydraulically operated and operated by (3) HP hydraulic pump. Top of tote dumper (contact parts) is stainless steel construction then dumps onto Syntron vibratory magnetic feeder with (3) model F-220DT3 vibratory ...more
30" wide x 70' long, Radial stacker belt conveyor, truss frame
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Radial stacker, measures approximately 30" wide x 70' long, constructed with 31" x 36" truss frame. Conveyor is set up to run hydraulically and includes top mounted drive. Complete with pivot plate, rubber tires and hydraulic cylinder to raise/lower frame. Previously used to feed cold feed bin at concrete batch ...more
2" Baileigh #TN-400, Abrasive Belt Notcher, 1-1/4" pipe mandrel, 2" x 79" belt, 5420 FPM, self centering vise, 3 HP, 220 volts
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Category: Notching Machines
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Baileigh
Model: TN-400
Notching Capacity (OD) 2" Angle Adjustment 0 - 60 Degree Belt Size 4" x 79" Belt Speed 5420 fpm Warranty 1 Year Parts Only Horsepower 3 H.P. Voltage 220V ~ 1 Phase Dimensions (L x W x H) 60" x 44" x 60" s 4" Abrasive Type Notcher Lever Feed With Adjustable Stop 1-1/4" Pipe Mandrel Self Centering Vise Quick Change ...more
Magnapower #ECS600, 24" portable Eddy Current sorting system, eccentric high inductive force rotor design, new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: ECS-600
600mm (24") Effective Sorting Area, Eccentric High Inductive Force Rotor Design, 24" PMDS Top Fed Rare Earth Drum & Feeder, Discharge Conveyor, Support Stand, Base Support For Diesel Generator (30kVA), Base Support For Control Panel, Cantilever Belt Change (~ 10 minutes), - Adjustable two-stage splitter box., - ...more
84" width x 240" L LTG, Conveyorized Tempering Oven, natural gas, 800000 BTU/hr., 500 F max, 1-10 psig, 480 V, 2000
Aaron Equipment Co | Schaumburg, IL
Category: Belt Ovens
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Year: 2000
used- ltg conveyorized tempering oven. 500 degrees f max temperature; 800,000 btu/hour; natural gas powered; 48" belt width; 20' conveyor; new blower fan. 3/60/480v. built 2000. previously used for steel part tempering at 350 degrees f.
Farris #8550F, 12" x 30" solid belt puller, manual belt adjustment, vari-speed transmission
Perry Videx LLC | Hainesport, NJ
Category: Pullers and Cutters
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Farris
Model: 8550F
Used Farris 12" Wide x 30" Long Solid Belt Puller, Manufacturer: Farris, Model: 8550F, Serial: 5269, Has manual belt adjustment, and variable speed transmission, Rated 3-50 feet per minute, FARRIS 8550F.
RDN #118-5, 4" x 18" two belt puller, 2 HP, 1996
Arlington Machinery | Lake Zurich, IL
Category: Pullers and Cutters
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rdn
Model: 118-5
Year: 1996
Used 4" Wide X 18" Long RDN Two Belt Puller, Model 118-5A, 2 HP 460/1/60, 10A Start/Stop Buttons, Speed Pot, Digital Speed Indicator, Manual Up/Down S/N: 35755 New In 1996 Approximate Dimensions: 34" L x 30 W x 62" H QUOTED AND SOLD AS-IS.
Jones #BFC, automatic, horizontal, continuous, motion, hot melt cartoner, rated from 50-160 cartons per minute
Frain Industries | Carol Stream, IL
Category: Carton Packaging Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Jones
Model: BFC
Jones, Model BFC, automatic, horizontal, continuous, motion, hot melt glue cartoner. Rated from 50 to 160 cartons per minute – depending on materials and application. Carton range of: 5" to 9" in Length; 1½’ to 3½" in Width; 8" to 12" in Depth. 10" wide x ...more
New England #60CFTHE, incline cleated belt feeder with 58" L x 58" W x 39" D Stainless Steel hopper, mounted on Stainless Steel base with leveling pads
Frain Industries | Carol Stream, IL
Category: Miscellaneous Feeders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: New England
Model: 60CFTHE
New England Machinery, Model 60 CFT HE, incline cleated belt feeder with number of product per hour – depending on materials and application. 58" wide x 58" long x 39" deep (60 ft³) stainless steel product hopper, 19" wide x 28" long live bottom belt conveyor powered by a ½ ...more
6" x 13" Farrel, lab mill, cabinet style, under slung drive, belt driven, 7.5 HP, rebuilt
Soberay & Sons Ltd | Cleveland, OH
Category: Plastic Rubber Mills
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Farrel
One (1) Rebuilt Farrel Lab Mill, 6 x 13" (150 x 330) rolls, cabinet style, under-slung drive, belt driven, flip up guides, 7.5 HP motor and drive, push button controls with START / STOP / REVERSE, knee and overhead safety, 16 week delivery.
Grecon #PJ-150/500 horizontal finger jointer, 2014
Ex-Factory | Charlotte, NC
Category: Woodworking Jointers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Grecon
Model: PJ-150/500
Year: 2004
GRECON PJ 150/500 and PF 10-610 Finger Jointer and PressFinger jointer and Press system: -- Grecon Finger Joint System Including: Model PJ 150/500 Shaper -- Trim Saw 5 HP -- Shaper Head 30 HP -- Glue Application Head -- Timber Width 40 mm - 150 mm (1.57" - 5.9") -- Timber Thickness 12 mm - 50 mm (.5" - 2") -- Timber ...more
20000 lb. U.S. Motors Machine, Coil Cradle Straightener, 30" width Capacity, 72" coil outside dimension, reconditioned
S & G Press & Machinery Sales | Shelby Township, MI
Category: Coil Cradles and Straighteners
Seller: S & G Press & Machinery Sales
Location: Shelby Township, MI
Mfr: U.S. Motors
Coil Weight 20000 pounds, Coil Width 30 inches, Coil Thickness.150 inches, Standard, US Machine Heavy Duty Coil Cradle Straightener Combination Coil weight capacity: 20,000 Lbs. Coil width capacity: 30" Stock thickness capacity:.150" @ 30" Wide Stock thickness capacity:.187" @ 24" Wide Stock thickness capacity:.300" @ ...more
28" wide x 7.2' long, Stainless steel belt conveyor, food grade blue belt, 1/2 HP drive
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Stainless steel belt conveyor. 28" wide x 86" long food grade blue belt, infeed height of 30½", discharge chute with 20" ground clearance, powered by ½ hp drive. Mounted on stainless steel frame with castors and locking leveling legs., OAD: 88" L x 34" W 33" H.
SeMMco #MM60/LD280, 304 Stainless Steel chocolate enrobing & cooling line, 6.6-32.8 FPM, 12" W x 50" L Stainless Steel wire mesh belt conveyor
Frain Industries | Carol Stream, IL
Category: Chocolate Candy Enrober
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Semmco
Model: MM60/LD280
SeMMco, 304 stainless steel, chocolate enrobing and cooling tunnel line rated from 6.6 to 32.8 feet per minute with number of product – depending on materials, application and machine configuration. Line consists of SeMMco Model MM60 chocolate enrober with 60 Kg or 132 Lbs of capacity and has 12" wide x ...more
16" wide x 10.8' long, Stainless steel inclined belt conveyor, 55" discharge height
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Stainless steel inclined belt conveyor. a 16" wide x 128" long blue belt with an infeed height of 22" and discharge height of 55". Mounted on locking casters., OAD: 130"L x 31"W x 55"H.
12" wide x 6.24" long, Turbo #6287-8174, incline chip conveyor, forward & reverse, 1 HP
Yoder Machinery Sales | Holland, OH
Category: Steel Slat and Chip Conveyors
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Turbo
Model: 6287-8174
SERIAL. 351996/501908, MODEL. 6287-8174, BELT WIDTH. 12", FLIGHT HEIGHT. 1", DUMP HEIGHT. 52", CONVEYOR HEIGHT IN FLAT. 9", CONVEYOR WIDTH. 20-1/2", LENGTH OF FLAT. 74", FORWARD & REVERSING. YES, MOTOR HORSEPOWER. 1 HORSEPOWER.
10" wide, Roach, inclined belt conveyor, 24" base, 56" incline, 46" discharge height
D & D Industries Inc | Monclova, OH
Category: Belt Conveyors
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Roach
ORDER 10, ROACH 10" WIDE BELT CONVEYOR WIDTH 10" BASE 24" INCLINE 56" DISCHARGE HEIGHT 46" OAD 24" W X 76" L X 55" T.
10" wide, Roach, inclined belt conveyor, 24" base, 56" incline, 46" discharge height
D & D Industries Inc | Monclova, OH
Category: Belt Conveyors
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Roach
ORDER 10, ROACH 10" WIDE BELT CONVEYOR WIDTH 10" BASE 24" INCLINE 56" DISCHARGE HEIGHT 46" OAD 24" W X 76" L X 55" T.
10" wide, Roach, inclined belt conveyor, 24" base, 56" incline, 46" discharge height
D & D Industries Inc | Monclova, OH
Category: Belt Conveyors
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Roach
ORDER 10, ROACH 10" WIDE BELT CONVEYOR WIDTH 10" BASE 24" INCLINE 56" DISCHARGE HEIGHT 46" OAD 24" W X 76" L X 55" T.
Cincinnati shear power conveyor & stacker, metal conveyor belts, 2 HP, #71084
Yoder Machinery Sales | Holland, OH
Category: Miscellaneous Conveyors
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
SHEET CAPACITY. 12' X 5', CONVEYOR BELTS. METAL, CASTER WHEELED CONVEYOR. YES, CASTER WHEELED STACKER. YES, AIR OPERATED STACKER. YES, HORSEPOWER CONVEYOR BELT MOTOR. 2.
Cat 950K, Wheel Loader, 7334 hours, S/N: FER00398, 2013
Wagner Equipmet - Heavy Machinery | Aurora, CO
Category: Wheel Loaders
Seller: Wagner Equipmet - Heavy Machinery
Location: Aurora, CO
Mfr: Caterpillar
Model: 950K
Year: 2013
(2)1000CCA,115A W/DISCONNECT, (8) TEETH W/ADV TIPS, *REAR WINDOW DAMAGE / CRACKED, 2013 CATERPILLAR 950K WHL LOADER, 3 VALVE HYDRAULIC SYSTEM, 7690 BW 1/27/26, ADD'L COUNTERWEIGHT-1100 LBS, ANTI-THEFT SECURITY, LOCKS, AS IS / AS RECEIVED, AXLES, LSD/LSD, ED, BRIDGESTONE VMT 23.5R25(DRY ROT), BUCKET-GP, 4.25 CYD ...more
Ohlson #VFFX-427, automatic, Stainless Steel, continuous motion, vertical form, fill, seal machine, 20-90 bags per minute
Frain Industries | Carol Stream, IL
Category: Form Fill Sealing Machines
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ohlson
Model: VFFX-427
Ohlson, Model VFFX-427, automatic, stainless steel, continuous motion, vertical form, fill, seal machine. Rated from 20 to 90 bags per minute – depending on materials, application and machine configuration. Bag size range: 2" to 7" in Width; 2" to 9" in length with proper change parts. ...more
35" wide x 4' long, Traveling Belt Feeder, 20:1 Ratio Speed Reducer, 1 HP, 208-230/460 V
JM Industrial LLC | Millwood, WV
Category: Belt Conveyors
Seller: JM Industrial LLC
Location: Millwood, WV
Used 35" Wide x 4' Long Traveling Belt Feeder, 1 HP Baldor motor, 208-230/460 Volt. Morris Rader shaft mounted speed reducer, 20:1 ratio.
Mereen-Johnson #2050, Double End Tenoner, 7.5 HP, variable speed 75 FPM, sound attenuated enclosure, AB PanelView, 460 V., 2004
RT Machine | Hughesville, PA
Category: Tenoners
Seller: RT Machine
Location: Hughesville, PA
Model: 2050
Year: 2004
Mereen-Johnson Model 2050 Double End Tenoner Maximum Width Capacity: 96" to Outside of Feed Chains Minimum Width: 5-1/4" Lay-Up Area: 30" First Station (Not Currently Installed): Trims Saws, 10 HP Each, Tilting Second Station: High-Speed Jump Copes, 10 HP Each Third Station: High-Speed Copes, 10 HP Each Cope Unit ...more
24" Vinyletech Abbottstown #D9060, Sheet Cooling Stack, approximately 24" wide x 12" diameter cooling drum
Federal Equipment Company | Cleveland, OH
Category: Stackers
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Vinyletech
Used 24" Vinyletech Abbottstown sheeting cooling stack, model D9060, approximately 24" wide x 12" diameter cooling drum, with 21" wide x 12" diameter mating drum, 24" wide x 8" diameter idler drum, serial# 22654, Vinyletech serial# 06181. includes Abbottstown puller cutter combo, model D9051, serial# 22952 ...more
Compact sandere, Alpha Brush Brush #KS-LS, 2022
Revelation Machinery | Chicago, IL
Category: Miscellaneous Sanders
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Alpha Brush
Model: COMPACT SANDERE
Year: 2022
Make: Alpha Brush, Model: KS-LS, Year: 2022, Machine Location: Florida, Conveyor Motor: 0.5HP, Conveyor Feed Speed: 9-45 feet/min, Conveyor Width: 8″, Sanding Head Motors: 1 HP, Thickness of Work-Piece: 4″, Speed of Sanding Drum: 100-700 RPM, Machine Weight: 625 Lbs., Machine Dimensions: 40″ x ...more
Doboy #SW-60W, Sleeve Wrapper, 5' infeed table, 22" wide film, wrapping trays 4" x 8" x 1" tall, 4000 watt, 208V
Machinery & Equipment Co | Brisbane, CA
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Doboy
Model: SW-60W
Wrapper, Doboy, Model SW-60W sleeve wrapper, serial number 91-13279, 4000 watt, 208V, single phase, portable. Complete with 5' infeed table, twin sets of film for up to 22" wide film. Infeed is adjustable to approx. 18" wide, last wrapping trays 4" x 8" x 1" tall, adjustable up to 7" wide and up to 1-1/2" tall. ...more
Featured
72" width x 144" L Flat Line Mesh Belt Dry Cure Oven with 3 Zone IR, Fiberglass mesh Belt
Raypaul Manufacturing | Lavonia, GA
Category: Belt Ovens
Seller: Raypaul Manufacturing
Location: Lavonia, GA
Year: 2020
"New" Flat Conveyor Style Dry / Cure Oven with 3 Zones of IR. Currently Fiberglass mesh Belt, Varible, Conveyor Speed, Exhaust Fan Speed, Recirculating Air Speed, Separate Zone Controls for Temerature and IR, Modular in construction, ships LTF, 6ft Wide Belt / 12ft Heat Chamber / 8 ft in and 8 ft out conveyor, Contact ...more
Tokyo Gasden #TBE415, Belt Furnace RD Type Conveyor Tempering Oven, 932°F, 13.5 KW
National Machinery Exchange | Newark, NJ
Category: Annealing Furnaces
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tokyo Gasden
MODEL TBE-145 BELT TYPE ANNEALING FURNACE, 932F DEGREES, 13.5 KW, 220 VOLT, 20" WIDE BELT TYPE, USED FOR HEAT TREATING SPRINGS.
21" wide x 13.5' long, Redoma System UMP 500, conveyor with overband magnet, 1/2 HP, 2011
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Redoma
Year: 2011
3 Phase 230/460V - 1/2 HP.
Hi-Speed #CM, Checkweigher, .5 HP, 1725 RPM, 460 V.
Genemco | Hearne, TX
Category: Packaging Checkweighers
Seller: Genemco
Location: Hearne, TX
Mfr: Hi-Speed
Model: CM
Hi-Speed Checkmate Checkweigher with Conveyor. Model: CM. S/N: CM-11428. Wiring DiagRam Industries: D2-81-147. Power supply: 115 V, 1.0 amps, 60 Hz, single phase. Hi-Speed Conveyor. Model: CM65SH CM. S/N: 11428. Job No. 940072. Max Capacity: 50 lbs. Original setup weight: 1.0 lbs. Rejector type: Push Plow. Conveyor ...more
Peco Inspx #Single, Inline Metal Detector, Stainless Steel, 3/60/230V.
Aaron Equipment Co | Schaumburg, IL
Category: Metal Detectors
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Peco
Model: SINGLE
used peco inspx scantrac model 450 inline x-ray metal detector. approximate aperture size 17.7" wide x 10" tall. conveyor belt 18-1/4" wide x 74" long. air reject and mechanical arm reject. hope industrial systems hmi, allen bradley powerflex 40. thermal edge air conditioner. is of stainless steel construction. ...more
Magnapower #Metal-Sensor, 24" sorting & recovery system,underbelt coil sensor array,new
Alan Ross Machinery Corp | Zion, IL
Category: Magnetic Separators for Scrap Yard
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Magnapower
Model: METAL-SENSOR
Recovers many metallics your existing equipment misses., Sense and eject valuable materials including: stainless steel, copper and other metals., Up To 25TPH capacity depending on your material's density, size and surface area., Underbelt Coil Sensor Array, Air Jet, Solenoid Activated Material Ejector Array, Touch ...more
19-1/2" wide x 12.8' long, Alimec, Stainless Steel belt conveyor, mounted on locking casters
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Alimec
AliMec stainless steel belt conveyor. a 19” wide x 152″ long food grade blue belt with an infeed and discharge range of 34″ to 37″. Mounted on locking casters., OAD: 152″L x 50″W x 35″H.
Furnace Oven, JN Machinery #300, 10" belt with motor
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Jn Machinery
Model: FURNACE OVEN
10" JN MACHINERY CORP #300 BELT DRIVEN CONVEYOR OVEN, MANUFACTURER - JN MACHINERY, TYPE - BELT DRIVEN OVEN, MODEL - 300, BELT WIDTH - 10", MAX TEMPERATURE - 950 DEGREES F, APPROXIMATE WEIGHT - 2000 LBS.
Italpresse #SP/1-A, special case clamp, automatic feed through, 2002
Ex-Factory | Charlotte, NC
Category: Clamp - Case & Feed Thru
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Italpresse
Model: SP/1-A
Year: 2002
ITALPRESSE SP/1-A SPECIAL CASE CLAMP (AUTOMATIC FEED THROUGH): -- :Case goods capacity: 92" (2,340 mm) max. & 12" (300 mm) min. length; 48" (1,220 mm) max. & 10" (250 mm) min. height, 27.5" (700 mm) max. width. -- 10' (3,500 mm) Infeed belt conveyor, 14' (4,267 mm) overall belt length inside clamp ...more
24" wide x 30' long, Flex-Weigh #DWM-IV, inclined cleated belt conveyor, 4" high cleats, serial# F-33101, #3146-02
Federal Equipment Company | Cleveland, OH
Category: Belt Conveyors
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Flex-Weigh
Used 30' Flex-Weigh inclined cleated belt conveyor, model DWM-IV, 24" wide x 30' long rubber cleated belt, 4" high cleats, approximately 7' discharge height, serial# F-33101.
Squid Ink #CoPilot 382P1 & CoPilot 128A touch controller & inkjet belt system, 2017, 2018
Machinery Scene | Toledo, WA
Seller: Machinery Scene
Location: Toledo, WA
Mfr: Squid Ink
Model: COPILOT
Year: 2017
Squid Ink CoPilot 382P1 & touch controllers with inkjet printers & Eastey belt conveyor., Serial # CPT382P1705023, Year: 2017, Squid Ink CoPilot 128A- controller industrial ink-jet printing, Turbo inkjet box printing system with dual barcode inkjet printer heads, Serial # CPT128A1810026, YEAR: 2018, Orion ...more
67" wide x 26.5' long, Dell'Orco & Villani, incline conveyor, 130" high, 10 HP, 1987
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Dell-Orco & Villani
Year: 1987
130” High x 67” Wide x 317” Long, 10Hp, 1987 DELL'ORCO & VILLANI UNASSIGNED.
24" wide x 6.9' long, Gorbel #AE-DT24081-H, cascading belt conveyor, (4) 13' 6"sections, 480 V., new
Perfection Global | Elk Grove Village, IL
Category: Belt Conveyors
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Gorbel
Gorbel AE-DT24081-H, 24" Wide Belt, (4) 13'6" Sections, 81" Total Length, 480V, Some Repairs Needed; Damage Caused in Transit, New—Never Used.
Cornell #D-26, Versator, deaerator, with vacuum system rated from 5-125 gallons and 1000-3200 RPM, 26" OD rotating disc (5 available)
Frain Industries | Carol Stream, IL
Category: Versators
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Cornell
Model: D-26
Cornell Model D26, "Versator", deaerator, with vacuum system rated from 5 to 125 gallons and 1000 to 3200 rpm per minute – depending on materials and application. 26" OD product rotating disc, (2) 2" NPT side chamber product charge and discharge ports, (1) 1½" NPT top vacuum port ...more
Urania #5000-P-Plus, Bag Sealer, Bag Sealer, 120 V., Belt Feed
Federal Equipment Company | Cleveland, OH
Category: Sealers and Sealing Systems
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Urania
Model: 5000-P-PLUS
Used Urania bag sealer, model 5000 P Plus, 120 volt, belt feed, with controls, serial# 0516066750.
Cat 239D3 C3H2, Skid Steer Loader, 93 hours, S/N: RWK01938, 2024
Wheeler Machinery | Salt Lake City, UT
Category: Skid Steers
Seller: Wheeler Machinery
Location: Salt Lake City, UT
Mfr: Caterpillar
Model: 239D3 C3H2
Year: 2024
*CONTROL, ISO, PROP, WT, *DISPLAY, ADVANCED, LCD, CAMERA, *FAN, COOLING, DEMAND, *FILM, TWO SPEED, *HYDRAULICS, PERFORMANCE (H2), *LIGHTS, LED, *QUICK COUPLER, HYDRAULIC, *ROPS, ENCLOSED WITH A/C (C3), *RUBBER BELT, DUAL/SINGLE IDLER, *SEAT,AIR SUSPENSION,CLOTH,HEAT, *STANDARD RADIO(12V),BLUETOOTH ...more
16" wide x 4' long, Slider bed conveyor, 7 FPM end drive, 460 V., 3 phase
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
13" Belt, 460V 3PH, End Drive 7 FPM, UNASSIGNED 00.
Airco #KF20-350S, Spiral Freezer, 10-Tier, 4000 lbs./hr., 4.5" clearance
Machinery & Equipment Co | Brisbane, CA
Category: IQF Spiral Freezers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Airco
Model: KF20-350S
Airco Kwik Freeze spiral freezer, Model KF 21-305 (also designated KF20-350S), designed for CO cryogenic freezing. a 21-inch wide Omnigrid belt, providing 305 feet of active belt length. The system s 10 tiers with 4.5-inch clearance between layers, accommodating a throughput capacity of approximately 1,500 to 4,000 ...more
APM #MSA-26SS, Semi-Automatic Shrink Bundler, w/Heat Tunnel, AB PV Plus 1250, 30" width rollers, Stainless Steel, legs, 240 V.
Aaron Equipment Co | Schaumburg, IL
Category: Bundler Machines - Shrink Bundlers
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Apm
Model: MSA-26SS
used- apm semi-automatic shrink bundler, model msa-26ss. set up for a 90-degree product infeed; 27.5" wide intermittent motion cross seal bar, with 6" long x 14" wide product hold down; 96" long x 24" wide x 37" tall stainless steel wire belt for heat tunnel; 48" long, aperture 28" wide x 13.5" tall stainless steel ...more
Duan Kwei #DK-PS 20A, Blister Packaging Machine, 8" wide aluminum roll stock capacity, 1997
Machinery & Equipment Co | Brisbane, CA
Category: Sealers and Sealing Systems
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Duan Kwei
Model: DK-PS 20A
Year: 1997
Blister packaging machine, manufactured by Duan Kwei Machinery, model DK-PS 20A, stainless steel frame. Currently set up for 4" wide aluminum roll stock, capable of up to 8" wide. Offered with conveyor, heaters, slitter, etc. and associated controls. New in 1997. Serial number 9721., Basis: FOB.
Hoyer #Hoyrobe, chocolate enrober, 50 FPM, 15-1/2" W x 34" L Stainless Steel mesh product belt, 26 gallon reservoir
Frain Industries | Carol Stream, IL
Category: Chocolate Candy Enrober
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Hoyer
Model: HOYROBE
Hoyer Model Hoyrobe, chocolate enrober, rated to 50 feet per minute – depending on materials, application and machine configuration. 15-1/2" wide x 34" long stainless steel mesh product belt, 26 gallon chocolate reservoir, chocolate pump, air blow off station, pick-up roller mounted in chocolate drip ...more
6" wide, Belt conveyor return idler rollers, carbon steel
Cooper Industries Llc | Millwood, WV
Category: Belt Conveyors
Seller: Cooper Industries Llc
Location: Millwood, WV
ITEM 2773: 6” DIAMETER BELT CONVEYOR RETURN IDLER ROLLERS 39” & 45” LONG, ROLLER COUNT & LENGTHS, 21 – 39”, 11 – 45”, 1 – 44”, 1 – 33”, CARBON STEEL, LOT PRICE, FOB HAW RIVER, NC…………. $ 4,000.00.
6" wide x 9.1' long, Stainless Steel belt conveyor, 37"-41" infeed/discharge height
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
Stainless steel belt conveyor. a 6" wide x 118" long belt with a 37" to 41" infeed / discharge height., OAD: 120"L x 21"W x 39"H.
20" wide x 23.6' long, Stainless Steel conveyor belt, neoprene belt with bottom 1/2 HP drive
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
20" wide x 121" long, stainless steel belt conveyor. a 20" wide x 121" long Neoprene belt with bottom ½ Hp drive and mounted on (8) legs with leveling legs and an infeed / discharge range of 40" to 45"., OAD: 123"L x 32"W x 45"H.
Cat 259D H2CN, Skid Steer Loader, 1092 hours, S/N: FTL17474, 2018
N C Machinery Co. - Heavy Machinery | Tukwila, WA
Category: Skid Steers
Seller: N C Machinery Co. - Heavy Machinery
Location: Bozeman, MT
Mfr: Caterpillar
Model: 259D H2CN
Year: 2018
BATTERY, HEAVY DUTY, 850 CCA, CERTIFICATION ARR, (US/CANADA), CONTROL, ISO, PROP, WT, CONVERSION ARRANGEMENT, DISPLAY, ADVANCED, LCD, CAMERA, ENG SN 8JC4056 MSO 7QWXG, FAN, COOLING, DEMAND, FILM, RIDE CONTROL, ANSI, INSTRUCTIONS, ANSI, USA, LANE 2 ORDER, LIGHTS, HALOGEN, PACK, DOMESTIC TRUCK, PACKAGE, PERFORMANCE ...more
24" wide, Stainless Steel inclined cleated conveyor, 1/2 HP motor drive w/vari-speed, mounted on Stainless Steel multi-leg frame with casters
Frain Industries | Carol Stream, IL
Category: Belt Feeder Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Stainless
Stainless steel, inclined cleated conveyor. 10" infeed height, 24" wide blue belt conveyor belt with 18" wide x 2" high cleats set on 9¾" centers. Conveyor has 32" long bottom horizontal run, 68" long incline, 24" long top horizontal run with 59" discharge. Powered ...more
Texwrap #ST-3322 /1322, automatic, right to left, inline, L-Bar sealer with closing conveyor & shrink tunnel, 20-100 FPM belt
Frain Industries | Carol Stream, IL
Category: Bundler Machines - Shrink Bundlers
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Texwrap
Model: ST-3322
Texwrap Model ST-3322 /1322, Automatic L-Bar sealer and shrink tunnel system. Model ST-3322 L-Bar sealer has package size range of: 2" to 32" in Length; 2-3/4" to 19.5" in Width; to 10.5" in Height. 46" long x 19" wide in feed conveyor, 22" wide cross seal bar and 33" long ...more
15-3/4" wide x 11.6' long, Alimec, Stainless Steel inclined belt conveyor, mounted on locking casters
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Alimec
AliMec stainless steel inclined belt conveyor. a 15” wide x 138″ long food grade blue belt with an infeed height of 24″ and discharge height of 69″. Mounted on locking casters., OAD: 138″L x 38″W x 70″H.
30" wide x 16' long, Hytrol, powered belt conveyor, 1 HP, 230/460 V., 3-phase, adj. legs
G-2000 | Toledo, OH
Category: Belt Conveyors
Seller: G-2000
Location: Toledo, OH
Mfr: Hytrol
adjustable height legs, push button control, 1 HP, 230/460V, 3 phase electric motor., Machine Type.Conveyors, Belt Manufacturer.HYTROL Model.N/A Year.N/A Condition.Used.
30" wide x 21' long, Hytrol, powered belt conveyor, 1 HP, 230/460 V., 3-phase, adj. legs
G-2000 | Toledo, OH
Category: Belt Conveyors
Seller: G-2000
Location: Toledo, OH
Mfr: Hytrol
adjustable height legs, push button control, 1 HP, 230/460V, 3 phase electric motor, Machine Type.Conveyors, Belt Manufacturer.HYTROL Model.N/A Year.N/A Condition.Used.
20" wide x 4' long, Hytrol, Slider Bed Belt Conveyor, 0.5 HP, 208-230-460 V
Cooper Industries Llc | Millwood, WV
Category: Belt Conveyors
Seller: Cooper Industries Llc
Location: Millwood, WV
Mfr: Hytrol
ITEM 1247: 20” WIDE X 48” LONG HYTROL SLIDER BED BELT, CONVEYOR. SN 579887. 0.5 HP 208-230-460-3-60 BALDOR, MOTOR AND GEARREDUCER. WITH SUPPORT LEGS, Price fob, Haw River, NC….
2 Ton, Gorbel, Free Standing Overhead Gantry Crane, 10.58' Bridge Span, 33' Runway length, 14' Under Hoist, 2 Ton Hoist capacity, 8 FPM, 2022
Prestige Equipment Corp | Melville, NY
Category: Gantry Type Bridge Cranes
Seller: Prestige Equipment Corp
Location: Melville, NY
Mfr: Gorbel
Year: 2022
Capacity: 4,000 Lbs., Bridge Span: 10'7", Runway Length: 33', Under Hoist: 14', Hoist Capacity: 2 Ton, Lifting Speed: 8 FPM, Free Standing Overhead Gantry Crane with Coffing JLC 2-Ton Hoist, 14' Wide Uprights x 17'3" Overall Crane Height.
36" x 8" Cam-Wood #WS-NA900X, 2-Hd. Top Knife Planer/Sander, 25 & 20 HP, 37" x 75" belt, 12-1/2" min. L, 53 FPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Planers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: WS-NA900X
Year: 2026
CAM-WOOD WS-M1000 NAX Planer Sander -- 2 Heads with 39.4" width capacity planer head and combination sanding heads: -- This machine is especially designed for tale off heavy materials such as glue panel, bend board, rough lumber. -- The first head is a knife planer head, with 25 HP motor. The spiral planer cutterhead ...more
24" wide x 12' long, Dorner #2200, Aluminum frame belt conveyor, vari-speed controller
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Dorner
Dorner, Model 2200, aluminum frame belt conveyor. a 24" wide x 144" long belt with a 24" to 36" infeed / discharge range and variable speed controller., OAD: 144"L x 30"W x 30"H.
JUST ADDED!
Ultimizers #Duo-Drive, Left Hand Optimizing Cut Off Saw, 1200 FPM,
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Model: DUO-DRIVE
Ultimizers Model Duo Drive, Left Hand Optimizing Cut Off Saw Top And Bottom Belt Drive System To Grip Material And Resist Slippage Crayon Mark Reader with "Smart-Belt" 19' Long X 8" Wide The Smart Belt Infeed System Works In Conjunction With The Computer Controller To Provide Consistent And Controlled Infeed To ...more
105 Ton, Verson #7-1/2, OBI mechanical punch press, 8" stroke, 18" Shut Height, 230/460 V. 3 Ph
Bullseye Industrial Sales LLC | Middlebury, IN
Category: Mechanical Punch Presses
Seller: Bullseye Industrial Sales LLC
Location: Middlebury, IN
Mfr: Verson
Model: 7-1/2
CLICK HERE TO SEE A VIDEO OF THE PUNCH PRESS HP: 10 Voltage: 230/460V Phase: 3 Press Rating Ton: 105 Stroke (inches): 8" Ram Open Height w/adjustment up (Inches): 23" Ram Shut Height w/Adjustment up (Inches): 18" Ram Adjustment Length (Inches): 4" Ram Die Shank Size (Inches): 4" Ram Bolt Distance (Center to Center) ...more
18" wide x 15.1' long, Inclined Stainless Steel conveyor, 15" infeed height, food grade belt, 25" discharge height
Frain Industries | Carol Stream, IL
Category: Belt Conveyors
Seller: Frain Industries
Location: Carol Stream, IL
Inclined stainless steel conveyor. a 15" infeed height, 18" wide x 190" long trough style food grade belt, 25" discharge height. Mounted on a (2) leg stainless steel base frame with casters., OAD: 190"L x 32"W x 26"H.
Klein Tools, Leather Cushion Belt Pad, 30" Size, New
Jack Wilkerson Industrial Surplus | Gonzales, LA
Seller: Jack Wilkerson Industrial Surplus
Location: Gonzales, LA
Mfr: Klein Tools
For sale is one (1) new Klein 30" Leather Cushion Belt Pad. Catalog number: 87906., Sponge-padded leather liner has rounded edges Thick leather back with four snap-one straps for easy attachment to any belt up to 2" wide. Permanently stitched in the back When sizing a belt to accommodate this pad, add 2-Inches (51 mm) ...more
6" wide x 10' long, Stainless Steel Belt Conveyor, 1 HP, 1725 RPM, 208-230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Belt Conveyors
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel belt conveyor, measures 6" wide x 10' long, includes stainless steel belt and stainless steel frame with legs. Belt is driven by 1 HP, 208-230/460V, 1725 RPM, 6/60 Hz motor thru gear reducer and chain & sprocket assembly. Includes emergency stop switch. Previously used to convey cans at food ...more
Jenfab #LJ-Belt-Washer, Pass Thru with Curved exit, 5 stage, Stainless Steel, U-Shaped 17' Exit Conveyor, 460 V., 2013
Benchmark Machine Tools | Miami, OK
Category: Conveyor and Pass Through Parts Washer
Seller: Benchmark Machine Tools
Location: Miami, OK
Mfr: Jenfab
Model: LJ-BELT-WASHER
Year: 2013
Electric Heat 140 Deg. F. Wash and Rinse Temperatures, Heated Air Blow Off, 7" WIde Belt 1x1 Inch Heavy Duty Belt, 12" Part Height, 190 Gallon Wash Tank, 60 GPM SS PUMP, 36 KW Electric Heat, 150 Gallon Rinse Tank, 40 GPM SS PUMP, 36 KW Electric Heat, Sprays From Above, can be modified, Oil Coalscer, OverFlow/ Auto ...more
Excise Stamp Applicator, CME Ltd #Stamper, 10-120 stamps per miniute, control panel has touch screen HMI, mounted on heavy duty frame
Frain Industries | Carol Stream, IL
Category: Miscellaneous Packaging Equipment
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Cme
Model: EXCISE STAMP APPLICATOR
CME Ltd, Excise stamp applicator. Rated from 10 to 120 stamps per minute depending on materials application and machine configuration. Can handle standard excise stamp sizes with proper change parts. Carton size range 1" to 7½" in length; 1" to 4½" in width; ½" to 2" ...more
24" wide x 20' long, Heavy duty conveyor with cleats, 10" sides, VSD, 460 V., surplus
Alan Ross Machinery Corp | Zion, IL
Category: Belt Conveyors
Seller: Alan Ross Machinery Corp
Location: Zion, IL
10" Sides, 20' Long, 24" Wide Cleated Belt, 3" High Cleats on 16" Centers., 460V/3PH/60Hz., VSD, A 6" diameter feed roll with bearings in a heavy, duty slide frame, allowing for belt alignment. A 6" diameter drive roll driven by a 1.0 HP, motor/gearbox thru a chain/sprocket system., The bottom of the conveyor is ...more
