Buy or Sell Your Vertical Press
AI-ranked results for vertical press - closest matches first
60 Ton, Niagara #M60, 6" stroke, 19.25"open height, 32" x 21" bed, Link 5000 - OmniLink II LCD Operator Terminal
Variegate Inc | Huntsville, AL
Category: Gap Frame Single Crank Press Machines
Seller: Variegate Inc
Location: Huntsville, AL
Mfr: Niagara
Model: M60
Niagara M-60:, Capacity: 60 tons, Stroke: 6", Shut Height: 19.25", Slide Adjust: 3.5", Slide: 21" x 16”, Bolster: 32" x 21", SPM: 100, Press Control: Link 5000 – OmniLink II LCD Operator Terminal, Manufacturing Date: ? Serial Number: 52376, Ready for inspection, Video Link: Coming Soon.
Quick #N-P50-04-08-EL-1PL-F-44-R-1Z, pneumatic w/fixed opening, 4' x 8' platen, 50 psi @ 100 psi supply, (18) 12.8" diameter air pods w/5.9" stroke, 44" opening, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quick
Model: N-P50-04-08-EL-1PL-F-44-R-1Z
Year: 2026
QUICK N-P50 Fixed Daylight Opening Air Pod PressThis Pod Press can produce a maximum 50 PSI platen pressure over the entire surface at 100 PSI supply air pressure. Press has a fixed vertical daylight opening of 44". The (18) 12.8" max. diameter air pods have 5.9" stroke.Material conveyance is via automatically ...more
59" Siemens / J-Press #1500N32-128-250SYLC, 1500mm / 104 plate filter press, 200/250 cu.ft.
Equipment Recovery Corp | Willoughby, OH
Category: Plate and Frame Filter Presses
Seller: Equipment Recovery Corp
Location: Willoughby, OH
Mfr: Siemens
Model: 1500N32-128-250SYLC
Brand: SIEMENS / J-PRESS, Condition: USED, "AS-IS", Model: 1500N32-128-250SYLC, Cat: JANUARY 28, 2008, Serial: F008049, Capacity: PRESS CAPACITY: 200 CU FT, EXP CAPACITY: 250 CU FT, FILTRATION AREA: 4203 SQ FT., EXP FIL. AREA: 5174 SQ FT., Weight: APPROXIMATELY 50,000 LBS., Category: FILTER PRESSES, Shipping ...more
30 Ton, Hydromec #Turbo-300-S, trim press, 9.8" stroke, 7.5 KW, rotary dial feed, 2000
National Machinery Exchange | Newark, NJ
Category: Trimming Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hydromec
Model: TURBO-300-S
Year: 2000
30 TON HYDROMEC TURBO-300-S TRIM PRESS, MANUFACTURER - HYDROMEC, MODEL - TURBO-300-S, YEAR - 2000, MACHINE NUMBER - 656, TONNAGE - 30 (300 KN), MOUNTING HEIGHT - 400MM, STROKE - 250MM, MAX CYCLES PER HOUR - 1800, MAIN PRESS MOTOR - 7.5 KW, DIAMETER OF CYLINDER - 300MM, ROTARY DIAL FEED.
400 HP 1800 RPM Teco, Frame 5009P, weather protected enclosure type 1, VSS, vertical solid shaft or VHS, vertical hollow shaft, New, 460 Volts
ESR Motor Systems LLC | Rock Hill, SC
Category: Vertical Pump Motors
Seller: ESR Motor Systems LLC
Location: Rock Hill, SC
Mfr: Teco
Frame: 5009P
551 Ton, Energy Mission #PBE-5061, Press Brakes, 240", 23.6" daylight, 14.8" stroke, 8.7" x 38.8" table, 21.7" throat, 50 HP
Bud's Machine Tools | Murray, UT
Category: Hydraulic Press Brakes
Seller: Bud's Machine Tools
Location: Murray, UT
Mfr: Energy Mission
Model: PBE-5061
Overview, Type:Press BrakeManufacturer:ENERGY MISSIONModel:ENERGY MISSION PBE 5061 - PRESS BRAKES AVAILABLE UP TO 2,000 TONSCondition:Build To OrderStatus:For Sale, Bending Force: 551 US Tons, Bending Length: 240", Clear Pass: 208.66", Open Daylight: 23.62", Ram Stroke: 14.76", Table Width: 8.66", Table Height: ...more
500 Ton, Danly #E4-500-64-96, straight side double crank press, 12" stroke, 42" Shut Height, 96" x64"bed, 12" slide adj., 22 SPM,S44173
Perfection Global | Elk Grove Village, IL
Seller: Perfection Global
Location: Rockford, IL
Mfr: Danly
Model: E4-500-64-96
Press Capacity: 500 TonBed Size: 96" x 64"Stroke: 12"Slide Adjustment: 12"Shut Height: 42"Window Width: 32"Speed: 22 SPMAir Feed Thickness Capacity: 24" x.281", Dallas D500 Air Feed w/ Pull Thru StraightenerWintriss SmartPac ControlAir Clutch and BrakeOperator T-Stand.
250 Ton, Verson, 72" x48", 60" daylight, 54" stroke, (2) 8" bore cylinders (5000 PSI), 40" operator height, #2719
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Verson
Model 250-HD2-72-4P. Serial #19592 72" x 48" nominal bed size. Overall between the posts is 74" L to R x 34" F to B. Two 8" bore cylinders: 6" dia rods; 54" max stroke; operating at 5000 PSI. Max daylight approx. 60". Operator height approx. 39.5". Bed and slide have 11 T-slots on 6" centers. Saw-tooth style safety. ...more
350 Ton, Cincinnati #350CB, hydraulic press brake, 14' overall, 150" between housing, 10" stroke, #67233
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 350CB
SERIAL. 41125, MODEL. 350 CB, OVERALL LENGTH OF BED. 14', DISTANCE BETWEEN HOUSING. 12'6", STROKE. 10", MAXIMUM DAYLIGHT. 18", MINIMUM DAYLIGHT. 8", ADVANCED SPEED. 65 IPM, PRESSING SPEED. 33/9 IPM, RETURN SPEED. 67 IPM, BED AND RAM MILLED AND DRILLED. YES, RETURN STROKE STOP. YES, TONNAGE CONTROL. YES ...more
JUST ADDED!
Enerpat America No. BM1090 Enerpat Briquetters, Metal Chips Briquette Press Machine, 3.5" Briquettes, 15 HP, Siemens/Schneider PLC, Unused
Enerpat | Ontario, CA
Category: Briquetters
Seller: Enerpat
Location: Ontario, CA
Mfr: Enerpat America
Model: BM1090
Enerpat America Briquette Press Machine – Puck Type – Compact footprint, double productivity, ready-to-ship from California – New, never used!, Press Force: 100 Ton Briquette Diameter: 3.5" (90 mm) Motor: 15 HP (11 kW) hydraulic motor package (Siemens/Schneider) Hydraulic Cylinders: Brand-name ...more
Manchester, 182" flooded nip size press, 60 HP, with 32.057" x 182" face roll
Global Equipment International | Chalfont, PA
Category: Paper and Pulp Mill Machinery
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Manchester
182" Flooded nip size press, 60hp, w/ 32.057 x 182" face roll, Manufacturer MANCHESTER Model SIZE PRESS Condition Used Stock Number 903705.034PF.
12 Ton, Press Master #CFP-12, hydraulic, 12" stroke, 18" daylight, 21" x16" table, 11" throat, 5 HP, #154832
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP-12
12 TON PRESSMASTER C-FRAME HYDRAULIC PRESS MODEL CFP-12… BRAND NEW TONS OF FORCE.(MAX). 12 TONS APPROACH SPEED. 186 IPMPRESS SPEED. 44 IPMRETURN SPEED. 269 IPMTABLE.(LR X FB). 21" X 16"… DAYLIGHT. 18" MAX. STROKE ADJUSTABLE. 12" THROAT. 11" U-SLOT OPENING. 4"FLOOR TO ...more
Kearney & Trecker #320TF-16, vertical mill, 16" x72" table, power draw bar, forward/reverse, #71081
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: 320TF-16
SERIAL. 5577030, MODEL. 320-TF-16, AREA OF TABLE. 72" X 16", SPINDLE SPEEDS. (24) 15 TO 1500 RPM, LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL KNEE FEEDS. (32) 1/8 TO 30 IPM, VERTICAL HEAD FEEDS. (32) 3/16 TO 45 IPM, LONGITUDINAL TRAVEL. 34", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 18", VERTICAL HEAD ...more
18" x 22" Amada/marvel #VT4555M (8-Mark-III), 60° tilting column, 1" blade
AM Metalmaq Inc | Hialeah, FL
Category: Vertical Band Saws
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Amada/marvel
Model: VT4555
Year: 2024
Model number VT4555M (8-Mark-III), STOCK MACHINE :, E4, second standard vise. $ 650.00, M3M, powered column tilt. 2,600.00, DRO, digital tilt readout. 950.00, In-bound freight to Miami. 2,000.00, Horizontal capacity 18", Vertical capacity 22", Vertical capacity @ 45 degrees, R/L 14.5"/13", @ 60 degrees, R/L 9.7"/7.3" ...more
10 Ton, Hydraulic C-Frame Press, 6" stroke, 4" adj., 17.5" x17" bed, 1994
D & D Industries Inc | Monclova, OH
Seller: D & D Industries Inc
Location: Monclova, OH
Year: 1994
4" ADJUSTMENT, 17.5" X 17" BED, 6" STROKE, RAPID ADVANCE 260 MM/S, PRESSING 20 MM/S, RETURN 50 MM/S, 75 MM/S, 1994, SINGLE, INCH, DUAL PALM BUTTONS, 2 GUIDE POST, 31" X 40" X 88"T APROX., 3000 LBS APROX..
250 Ton, Press Master #RTP-250T, 16" stroke, H-Frame hydraulic press, 4-Axis, #151550
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: RTP-250T
250 TON PRESSMASTER ROLL-IN TABLEFULL 4 AXIS POWERED STRAIGHTENING PRESS RATED CAPACITY. 250 TONSWIDTH BETWEEN UPRIGHTS. 60"DEPTH BETWEEN POSTS. 23-1/4"MAXIMUM RAM TO TABLE.″2"STROKE. 20"TABLE TRAVEL. 28-1/4"FLOOR TO TABLE TOP. 26-3/4"CYLINDER BORE SIZE. 12"PRESSING SPEED. 4 ...more
Pagnoni #Smartline-4'-X-8', feed through short cycle p, 53" x 102" plate, 1-1/4" thick, 10" between plate, 498 psi, (120) cycle/hr, (6) 11" diameter cylinder, 27 Ton, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Model: SMARTLINE-4'-X-8'
Year: 2026
PAGNONI SMARTLINE 4' x 8' Single Opening Melamine Press.Standard Press Line for Short Cycle Lamination of 4' x 8' Particleboard and MDF Panels. This is a complete PLC Controlled Line with material handling. The line consists of the following groups:Infeed System with Continuous Feed: -- Table with ...more
12" Minster #20-12, press feed line, 60 ton, (2) Littell double end uncoilers, 13.5"-20.5" manual expansion
D & H Machinery Inc | Toledo, OH
Category: Press Feed Lines
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Minster
Model: 20-12
12" Wide Minster Press Feed Line -(2) Littell Double End Uncoilers: 2,000# x 12" Wide Capacity each side Model: 20-12 Manual Expansion: 13.50" - 20.50" Air Drag Brake 60" Maximum Coil OD -(2) Minster Motorized Coil Straighteners: -(2) Minster High Speed Mechanical Presses: Minster: Model P2-60 Capacity: 60 Ton 0 - 500 ...more
59" Summit, vertical boring mill, 59" 4-Jaw chuck, 70" Swing, 47" under rail, Ram, turret & side heads, 1976
Scott Machinery & Supply Inc | Helena, AL
Category: Vertical Boring Mills & VTL's
Seller: Scott Machinery & Supply Inc
Location: Helena, AL
Mfr: Summit
Year: 1976
S/N:15A-361 Year: 1976 (approx) CATALOGUE : Table Diameter. 59" Swing Maximum, w/o Side Head. 70" Swing Maximum, w/Side Head. 65" Height Under Cross-Rail, Maximum. 47.25" Vertical Travel of Side Head. 45" Cross-Rail Travel, Vertical. 39" Ram-Head Travel, Vertical. 33.5" Ram-Head Swivel, Degrees. 35-DEGREES Side-Head ...more
250 Ton, Press Master #4PP-250, hydraulic 4-post press, 8" stroke, 26" daylight, 15" adj., PLC Control
Machinery Values Inc | Harrison, NJ
Category: Hydraulic Presses
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: 4PP-250
250 TON PRESSMASTER HYDRAULIC FOUR-POST PRESS MODEL HFP4-250 TONS OF FORCE. 250 TONS RAM SPEED.(APPROACH). 78 IPM.(PRESSING). 27 IPM.(RETURN). 117 IPMBORE. 14"ROD. 6"TABLE.(L-R X F-B). 48" X″6" UPPER PLATTEN.(L-R X F-B). 48" X″6"DAYLIGHT. 26" STROKE ADJUSTABLE. 15" ...more
Polamco #FW41M, horizontal/vertical mill, 15-3/4" x78" table, pendant Control, 15 HP, #57501
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Polamco
Model: FW41M
SERIAL. 92/23, MODEL. FW41M, AREA OF TABLE. 78" X 15-3/4", SPINDLE SPEEDS HORIZONTAL. (21) 20 TO 1300 RPM, SPINDLE SPEEDS VERTICAL SPINDLE. (21) 37.5 TO 2360 RPM, LONGITUDINAL FEEDS. (32) 1/2 TO 42 IPM, CROSS FEEDS. (32) 3/8 TO 31-5/8 IPM, VERTICAL KNEE FEEDS. (32) 1/4 TO 20 IPM, VERTICAL RAM FEEDS. (16) 1/4 TO 80 ...more
60 Ton, Wysong #THS60-96, hydraulic press brake, 8' overall, 78" between housing, 6" stroke, 7.5 HP, 1997
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wysong
Model: THS60-96
Year: 1997
SERIAL. TH8-101, MODEL. THS 60-96, YEAR. 1997, CAPACITY. 60 TONS, OVERALL LENGTH OF BED & RAM. 96", DISTANCE BETWEEN HOUSING. 78", STROKE. 6", ADJUSTMENT. 9", MAX DIE SPACE. 15", THROAT. 6", RAM SPEED APPROACH. 300 IPM, RAM SPEED PRESS. 20 IPM, RAM SPEED RETURN. 225 IPM, DUAL PLAM BUTTONS. YES, 1 SHOT LUBE. YES ...more
Manesty #Series-16, Betapress Rotary Tablet Press, Medium Speed, Single-Sided, 90000 tablets/hr., 5/8" max Tablet diameter, 11/16" max Fill depth
Perry Videx LLC | Hainesport, NJ
Category: Tablet Press Machine
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Manesty
Model: SERIES 16
Used Manesty Series 16 Betapress medium speed rotary tablet press., Unit is single sided rotary tablet press with one station of pre-compression., Maximum tablet diameter 5/8" (15.8mm) with maximum depth of fill 11/16" (17.4mm)., Maximum capacity 90,000 tablets/hour with minimum capacity 36,000 tablets/hour., Designed ...more
90 Ton, Cincinnati #90FMIIx8, hydraulic press brake, 8' overall, 78" between housing, 8" stroke, automatic crowning
Fram Fram LLC | Savage, MN
Category: Hydraulic Press Brakes
Seller: Fram Fram LLC
Location: Savage, MN
Mfr: Cincinnati
Model: 90FMIIX8
90 TON X 8' CINCINNATI MODEL 90FMIIx8 HYDRAULIC PRESS BRAKE:, SERIAL: 48910, MODEL: 90FMII X 6, CAPACITY: 90 TONS, OVERALL LENGTH OF BED AND RAM: 8', DISTANCE BETWEEN HOUSING: 6'6", STROKE OF RAM: 8", RAM ADVANCE SPEED: 132 IPM, RAM PRESSING SPEED: 18 IPM, RAM RETURN SPEED: 190 IPM, AUTO CROWNING: YES ...more
Civiemme, Vertical Log Stacker, Semi-Automatic, for web offset presses
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Paper Stackers
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Civiemme
Semi-Automatic Vertical Log Stacker for web offset presses.
Cam-wood #IAT-620-150HX, Medium Production Finger Jointer, 24" wide x 31.5" long belt, 1/2 HP, 180 FPM, 24" table, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Jointers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: IAT-620-150HX
Year: 2026
CAM-WOOD IAT 620-150HX INVERTER DRIVEN FINGER JOINT SYSTEM Lay-Up and Block-Staging Infeed Conveyor: -- 24" Wide x 31.5" long belt conveyor powered with 1/2 HP motors. The conveyor is controlled by the operating and system. Feeds at a constant rate of 180 FPM. Block delivery is controlled by the operator and machine ...more
Kearney & Trecker #205-S12, vertical milling machine, 12" x56-1/2" table, 5 HP, 14" throat, coolant
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: 205-S12
SERIAL. 21-9482, MODEL. 205-S12, AREA OF TABLE. 56-1/2" X 12", SPINDLE SPEEDS. (24) 25 TO 2000 RPM, LONGITUDINAL & CROSS FEEDS. (16) 1/4 TO 32 IPM, VERTICAL FEEDS. (16) 1/8 TO 16 IPM, LONGITUDINAL TRAVEL. 28", CROSS TRAVEL. 12", VERTICAL KNEE TRAVEL. 14", VERTICAL HEAD TRAVEL. 4", TAPER IN SPINDLE. #50 NS ...more
DAH LIH #DL-GH2200, Vertical/Horizontal Mill, 11" x 51" Table, 1300 RPM, 440 V., 1988
AM Metalmaq Inc | Hialeah, FL
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Dah Lih
Model: DL-GH2200
Year: 1988
Model GH2200, Year of Manufacture 1988, Table working size 51.2" x 11", Table travel--longitudinal 39.4", --cross 14.2", --vertical 17.7", Table feeds--number, --longitudinal & cross.6 to 27.5 ipm, Rapid traverse--longitudinal & cross 118 ipm, --vertical 31 ipm, HORIZONTAL SPINDLE:, Spindle taper #50 taper ...more
320 Ton, Lauffer #RPN-320, down-acting hydraulic press, 14.5" stroke, 24.8" daylight, 1993, #10398
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Hydraulic Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Lauffer
Model: RPN-320
Year: 1993
(1) Used 320 Ton Lauffer Downacting Hydraulic Press, Serial Number: 14515, Capacity: 320 Ton Pressing, Capacity: 39 Ton Retract, Stroke: 14.5, Daylight Opening: 24.8, Bed Area: 39 L-R x 31 F-B, Windows: 33 Wide, Speeds: 940 IPM Rapid Advance, 90 IPM Pressing, 800 IPM Return, Press Control Panel, Operator T-Stand ...more
Dake #5-093A, H Frame Press
Wheeler Machinery Sales | Pomona, CA
Category: H Frame Hydraulic Press Machines
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Dake
Model: 5-093A
Dake 5-093A Powered H Frame Press #7087 #1, Capacity: 50 Ton, Ram Speed: 40 IPM Adv. / 7 IPM Press, Main Motor: 2 HP, Travel of Table: 35", Travel of Ram: 10", Width Between Uprights: 32-3/4", Weight: 1,500 Lbs..
16" Sweet Vertical Separator 2 Phase (includes 100 bbl DW tank) - 1480 psi
IronHub | Calgary, AB
Category: Vertical Separators
Seller: IronHub
Location: Frenchman Butte, SK
Mfr: Plains Oil Ltd.
Year: 2000
Available for sale: A 100 bbl DW tank manufactured by Plains Oil Ltd. in the year 2000. The tank s a vertical position, a diameter of 16 inches, and a maximum pressure rating of 1480 psi. This portable unit is classified under sweet service type and is currently disconnected from operation. Located in Frenchman Butte ...more
400 Ton, Pacific #K400-16, hydraulic press brake, 16' overall, 172" between housing, 12" stroke, 1968
Perfection Global | Elk Grove Village, IL
Category: Hydraulic Press Brakes
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Pacific
Model: K400-16
Year: 1968
Maximum Tonnage: 400 TonPunching Capacity: 266 TonOverall Bending Length: 192"Distance Between Housings: 172"Bending Capacity: 3/8" x 14'Length of Ram Stroke: 12"Daylight Opening: 20"Closed Height: 8"Rapid Advance: 57 IPMNormal Press: 25 IPMReturn Speed: 55 IPM, Pit Required.
135 Ton, Cincinnati #135FMIIx8, hydraulic press brake, 10' overall, 78" between housing, 8" stroke, power back gauges
Fram Fram LLC | Savage, MN
Category: Hydraulic Press Brakes
Seller: Fram Fram LLC
Location: Savage, MN
Mfr: Cincinnati
Model: 135FMIIX8
135 TON X 10' CINCINNATI MODEL 135FMIIx8 HYDRAULIC PRESS BRAKE:, SERIAL: 44411, MODEL: 135FM X 8, CAPACITY: 135 TONS, OVERALL LENGTH OF BED AND RAM: 10', DISTANCE BETWEEN HOUSING: 6'6", STROKE OF RAM: 8", HORN: LEFT SIDE, RAM ADVANCE SPEED: 132 IPM, RAM PRESSING SPEED: 18 IPM, RAM RETURN SPEED: 190 IPM ...more
Swisher (Special) vertical grinder, 6" grinding wheel, 4" vertical adj., 3 HP, #19429
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Swisher
VERTICAL SPINDLE. 3 HP (EST), GRINDING WHEEL. 6" DIAMETER, INSIDE GUARDS. 20" F-B X 40" L-R, POWER GRINDING HEAD FEED. YES, SET UP W/SPECIAL FIXTURE FOR END GRINDING, VERTICAL ADJUSTMENT. 4", VERTICAL CLEAR DISTANCE IN FIXTURE. 36".
JUST ADDED!
Mitsubishi #3FR, Perfecting Sheetfed Offset Press, 6 Color, 40" width, 364M impressions, 1996
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Sheetfed Offset Printers
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Mitsubishi
Model: 3FR
Year: 1996
The Mitsubishi 3FR 6-color perfecting sheetfed offset press configured for 4/2 perfecting or 6/0 straight printing. This 40" (965mm) format press is designed for commercial printing applications including catalogs, direct mail, and marketing materials., Manufacturer: Mitsubishi, Model: 3FR, Year: 1996, Configuration: ...more
Cam-Wood PT-416-HFX, high frequency feed thru g, 4' x 16' x 4" Thickness Feed Thru, 460 V., 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Year: 2026
CAM-WOOD PT-416HFX Feed Trough High Frequency Press4' X 16' X 2" Thickness Feed Through High-Frequency Presss: -- Mass production for wood-based boards (panels), 2 to 3 minutes for curing a 4' x 16' wood panel (board) -- Automatic infeed, outfeed cycle, mass production with a 3 - 5 minute cycle time. ...more
200 Ton, Amada #SDE-2025, 9.8"stroke, 25.2"Shut Height, 4.3"adj, 49.2" x 33.1" table, 2008
Machinery Marketing International | Chicago, IL
Category: CNC Press Brakes
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Amada
Model: SDE-2025
Year: 2008
Press Capacity: 200.7 Ton (2000 kN), Shut Height: 25.2" (450mm), Slide Area: 33.5" x 24.8" (850 x 630 mm), Table Area: 49.2" x 33.1" (1250- x 840 mm), Stroke Length: 9.8" (250 mm), Slide Adjustment: 4.3" (110 mm), Max Upper Die Weight: 2204.62 lbs (1000kg), Main Motor Drive: 46.9 hp (35 kW), Connected Load: 28.15 hp ...more
160 Ton, Omega Design #PRCB-30160, Hydraulic Press Brake, 10' overall, 280mm stroke, ESA Control, 400V., 6 Axis Back Gauge, Willa Crowning, Auto Positioning Safety System, 2022
Revelation Machinery | Chicago, IL
Category: Hydraulic Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Omega Design
Model: PRCB-30160
Year: 2022
Make: Omega, Model: PRCB 30160, Year: 2022, Machine Location: Upon Request, Pressing Force: 160 Tons, Bending / Working Length: 10.17 ft, Bending Speed: 17 mm/s, Stroke: 280 mm, Opening Height / Max Ram Clearance 395 mm, Number of Axes: 6, Control System: ESA, Power: 400V, Approx. Machine Weight: 10,700 kg, 6-Axis ...more
200 Ton, Press Master #RTP-200, H-frame hydraulic press, 20" stroke, roll-In table press, #158297
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: RTP-200
200 TON PRESSMASTER ROLL-IN TABLEFULL 4 AXIS POWERED STRAIGHTENING PRESS RATED CAPACITY. 200 TONSWIDTH BETWEEN UPRIGHTS. 60"DEPTH BETWEEN POSTS. 20-1/4"MAXIMUM RAM TO TABLE.″2"STROKE. 20"CYLINDER TRAVEL. 27-3/4"TABLE TRAVEL. 28-1/4"FLOOR TO TABLE TOP. 26-3/4"CYLINDER BORE SIZE. ...more
JUST ADDED!
Supermax, Vertical & Horizontal Milling Machine, 39.4" x 14.2" x 17.7" travel, 51" x11" table
Equilibrium Machinery | Waukesha, WI
Seller: Equilibrium Machinery
Location: Waukesha, WI
Mfr: Supermax
Supermax Vertical and Horizontal Milling Machine, 51″ x 11″ Table, Table Travel Longitudinal 39.4″, Cross Travel 14.2″, Vertical 17.7″, More info to come.
JUST ADDED!
Wolverine, 6-Color Flexo Stack Press, 68" wide, 60" unwind diameter, 25" print cylinders, 50" repeat, 60" diameter 2-drum surface winder
Global Equipment International | Chalfont, PA
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Wolverine
Model: 6 COLOR STACK PRESS
Used 68" Wide Wolverine Stack Press, Previously running paper products, Still installed but no longer running. Still under power., 6 Color with chambered doctor blades, Unwind diameter: 60", Up to 50" repeat, Two drum surface winder as rewind, 60" diameter, Overhead gas drying, Between color drying, (6) anilox ...more
95 Ton, Piranha #95-10, hydraulic press brake, 10' overall, 102" between housing, 0-6" stroke, 8" throat, 25 HP
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Piranha
Model: 95-10
SERIAL. 1083MODEL. 9510YEAR NEW. 1999CAPACITY. 95 TONLENGTH OF BED & RAM. 10'DISTANCE BETWEEN HOUSINGS. 8'6"STROKE. 0 TO 6"MAXIMUM OPEN HEIGHT. 15"MIMIMUM CLOSED HEIGHT. 9"DEPTH OF THROAT. 8"SPEED APPROACH & RETURN. 130 IPMPRESSING SPEED. VARIABLEELECTRIC FOOT PEDAL. YESMAIN MOTOR. 25 HORSEPOWER.
Janome #JP-104, electroc-press servo press & Columbia Slide-A-Mark pneumatic marking press, 2012
Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Janome
Model: JP-104
Year: 2012
10 kN JANOME JP-104 STAND-ALONE TABLE-TYPE ELECTRO PRESS HIGH PRECISION SERVO PRESS W/4 TON COLUMBIA MARKING TOOLS 451 SLIDE-A-MARK PNEUMATIC MARKING PRESS & TABLE, 10kN JANOME STAND ALONE TABLE TYPE, ELECTRO PRESS HIGH-PRECISION SERVO PRESS, & 4 TON COLUMBIA MARKING TOOLS SLIDE-A MARK, PNEUMATIC MARKING ...more
Supermax #YCM-2VASK, Vertical Milling Machine, 51.1" x 11" Work Table, 0.6" x 3" x 2.4" T-Slots, 11.75" width x 39.4" L Table Travel, 3.7 kW, 1993
GCH Machinery | Warren, MI
Seller: GCH Machinery
Location: Warren, MI
Mfr: Supermax
Model: YCM-2VASK
Year: 1993
Supermax YCM-2VASK Vertical Mill, 51.125"x 11" Table, 39" Longitudinal Travel, 11.75" Cross Travel, 17.75" Vertical Travel, SUPERMAX YCM-2VASKVERTICAL MILLING MACHINE, S/N JOB8709 Year: 1993, STANDARD, TABLE, Working Surface Of Table……………… 51.125”x 11” ...more
1 gallon Ross #DSLDM1, double planetary mixer, jacketed, 100 psi, temperature probe
Frain Industries | Carol Stream, IL
Category: Planetary Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Ross
Model: DSLDM1
1 gallon, double planetary mixer with working capacity of 3/4 gallons (3 liters) & full holding capacity of 1 gallon (3.8 liters). All wetted parts are hastelloy C with #4 finish and external parts 316 S/S. Can with temperature probe, jacket rated at 100 psi designed for full vacuum with three 3" diameter ...more
175 Ton, Wysong #PHS175-120, 7-Axis CNC hydraulic press brake, 10' overall, 102" between housing, 8" stroke
National Machinery Exchange | Newark, NJ
Category: CNC Press Brakes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Wysong
Model: PHS175-120
, PRESS FORCE 175 TONS, OVERALL LENGTH OF BED AND RAM 120", DISTANCE BETWEEN HOUSINGS 102", TRAVELS, R - AXIS 8", X1 _ AXIS 20" (FLIP-UP STOP ARMS FOR STANDARD FLANGES), X2 - AXIS 20" (FIXED LOCATION STOPS FOR LARGE FLANGES 24" AND GREATER), Y1 - AXIS 8", Y2 - AXIS 8", Z1 - AXIS 39" FROM CENTER, Z2 - AXIS 30" FROM ...more
Sharp #KMA-2, vertical milling machine, 3-Axis Newall digital read out, pendant controls, power draw bar
Harris Machine Tools, Inc. | Houston, TX
Seller: Harris Machine Tools, Inc.
Location: Houston, TX
Mfr: Sharp
Model: KMA-2
Vertical Head Travel: 21", Spindle Nose to Table: 4" - 25", Spindle Center to Column: 17", Vertical Housing Feeds:.0025 -.01 in. per revolution, Table Feeds: 1 3/16 - 37 inches per minute, Pendant Controls, 3 Axis Newall DRO, Rapid Traverse, Auto Lubrication, Work Light, Leveling Pads, Power Draw Bar.
75 Ton, Cincinnati #75-OBS, Cincinnati touch screen Control w/stand & casters (updated 2021), #30441
Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Cincinnati
Model: 75 OBS
Year: 2021
75 TON CINCINNATI-INC CNC OPEN-BACK GAP-FRAME HYDRAULIC PRESS, Updated 2021, Serial No 43017, Model 75 OBS, Cincinnati-Inc Touch-Screen Control w/Stand & Casters (Updated 2021), 2.5" Thick T-Slotted Slide Bolster, 3.5" Thick T-Slotted Bed Bolster, Slide Mounted Knockout, CATALOG :, Tonnage Capacity, Low Speed 75 ...more
150 Ton, Press Master #CFP-150T, hydraulic press, 15" stroke, 20.5" daylight, 13" throat, 20 HP, #126572
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP-150T
150 TON PRESSMASTER HYDRAULIC C-FRAME PRESSMODEL CFP-150T… BRAND NEW RATED CAPACITY. 150 TONSAPPROACH SPEED. 80 IPMPRESSING SPEED. 9 IPMRETURN SPEED. 101 IPMTABLE WIDTH.″4"TABLE DEPTH. 20"U-SLOT WIDTH. 4"DAYLIGHT. 20-1/2"FULL STROKE. 15"THROAT. 13"TABLE ...more
JUST ADDED!
60 Ton, Bliss #C60, OBI Back-Geared Punch Press, 31" x 22" bed, 4" stroke, 14.5" shut height, 3" slide adjustment, air clutch, Cieco PPC1100R-4 Press control, 1976
Wenco Machinery Corp | Ringwood, NJ
Seller: Wenco Machinery Corp
Location: Ringwood, NJ
Mfr: Bliss
Model: C60
Year: 1976
60 TON BLISS Mdl# C-60 OBI PRESS BACK GEARED, CAPACITY 60 TON, TYPE OPEN BACK INCLINABLE, STROKE 4", SLIDE ADJUSTMENT 3", BED AREA 31" X 22", SHUT HEIGHT - TO BED 14-1/2", AIR CLUTCH, - New Cieco Press Control - PPC1100R-4, - New Motor Controls, All New Wiring, - Side Guards with Light Curtains.
JUST ADDED!
120 Ton, Atlantic #HDE120-12, hydraulic press brake, 12' overall, 124" between housing, 4.7" stroke, 15 HP, 2006
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Atlantic
Model: HDE120-12
Year: 2006
SERIAL. 90114, MODEL. HDE120-12, YEAR NEW. 2006, CAPACITY. 120 TON, BED LENGTH. 144", DISTANCE BETWEEN HOUSINGS. 124", THROAT DEPTH. 9.8", STROKE. 4.7", OPEN HEIGHT. 12.8", CLOSED HEIGHT. 8.1", PASSLINE HEIGHT. 34.4", FAST APPROACH SPEED. 165 IPM, FAST RETURN SPEED. 142 IPM, PRESS SPEED. 17 IPM, TONNAGE LIMIT CONTROL. ...more
190 Ton, Betenbender #12-190T, Hydraulic Press Brake, 12' overall, 14" open, 8" stroke, 20 HP, power Back Gauge
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Betenbender
Model: 12-190T
190 Tons X 12’ Hydraulic Press Brake with Power Backgauge and Palm Control, Capacity: 190 Tons, Bending Length: 144”, Open Height: 14”, Stroke of Ram: 8”, Rapid Approach Speed: 68 IPM, Pressing Speed: 31 IPM, Return Speed: 86 IPM, Bed Height: 37”, Motor: 20HP, Approx. Weight: 28,000 Lbs ...more
Cam-Wood #PT-48HF, high frequency feed thru g, 49" width x 98" L x 3-1/8" thick working dims, 65 kG/cm2, 5 HP pump, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Cam-Wood
Model: PT-48HF
Year: 2026
CAM-WOOD PT-48HF Feed Trough High Frequency Press4' X 8' Feed Through High-Frequency Presss: -- Mass production for wooden boards, 2 to 3 minute for curing a 4' x 8' wooden board -- Automatic infeed, outfeed cycle, mass production within 3 - 5 minutes is ready for output. -- Shortens manufacturing ...more
100 Ton, Accurpress #71008, hydraulic press brake, 8' overall, 76" between housing, 8" stroke, 10" throat, 1998
Perfection Global | Elk Grove Village, IL
Category: Hydraulic Press Brakes
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Accurpress
Model: -71008
Year: 1998
Tonnage Capacity: 100 TonOverall Length: 96"Distance Between Housings: 76"Stroke: 8"Throat Depth: 10"Daylight: 14"Shut Height: 6"Ram Speeds Approah Speed: 115 IPMPressing Speed: 241 IPMReturn Speed: 200 IPM, Hurco Autobend 7 Control2-Axis CNC Backgauge.
175 Ton, Cincinnati #175FMI, hydraulic CNC press brake, upgraded touchscreen controls, 10' overall, 102" between housing, 1986
G-2000 | Toledo, OH
Category: CNC Press Brakes
Seller: G-2000
Location: Toledo, OH
Mfr: Cincinnati
Model: 175FMI
Year: 1986
SERIAL. 45444, YEAR NEW. 1986, UPGRADED TOUCHSCREEN CONTROLS. 04/2011, MODEL. 175FMII X 8, CAPACITY. 175 TON OVERALL LENGTH OF BED AND RAM. 10' DISTANCE BETWEEN HOUSING. 8'6" STROKE OF RAM. 10" OPEN HEIGHT. 17" CLOSED HEIGHT. 7" RAM ADVANCE SPEED. 132 IPM RAM PRESSING SPEED. 18 IPM RAM RETURN SPEED. 190 IPM ...more
Torrington #V80 Verti-slide, .062" max wire diameter, .032" max thickness, .750" max width, 100-500 SPM
Victory Machinery Exchange | Lake Forest, IL
Category: Wire Formers
Seller: Victory Machinery Exchange
Location: Lake Forest, IL
Mfr: Torrington
Model: V80
Catalog :, Maximum Strip Thickness:.032" Maximum Srtip Width:.750" Maximum Wire Diameter:.062" Wire Line Height: 46" Strokes Per Minute: 100 - 500 Feed Stroke: 5" Press Capacity: 5 Tons Press Stroke:.500" Length of Die Area: 8" Shut Height of Press: 4" Press Ram Adjustment:.250" Maximum Working Area: 14" Cutoff Slide ...more
Sharp #KMA, LMV, TMV Vertical Bed Mill, 9"-29"-20" x 42"-106", new, #14567, 14568, 14569-14451 (6 available)
Blumberg Machinery Co | Bannockburn, IL
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Sharp
Model: KMA
NEW 15" x 67" SHARP MODEL KMA-1 VERTICAL BED MILL, Heavy duty vertical bed mill geared head spindle and massive hardened and ground bed ways for heavy milling, The vertical column is made out of box shape high tensile strength casting reinforced with honeycombed ribbings. It offers excellent vibration dampening s and ...more
Magerle #MFP125N35M45, 4-Axis CNC creep feed grinder, 49" x 14", 27.5 HP, 9000 RPM, 1992
Asset Exchange Corporation | Elk Grove Village, IL
Category: CNC Creep Feed Grinders
Seller: Asset Exchange Corporation
Location: Elk Grove Village, IL
Mfr: Magerle
Model: MFP125N35M45
Year: 1992
Overview, Type: Grinder-CNC All Types Manufacturer: MFP125N35M45GAS CNC CREEP FEED Model: MFP125N35M45GAS CNC CREEP FEED Year: 1992 Stock #: 92901 Status: For Sale Serial #: 143 Country: United States, ImperialMetricsize 49" x 14" 49" x 14" # Axis 4 4 Power 27.5 hp 20.5 kW Max RPM 9,000 RPM 9,000 ...more
JUST ADDED!
275 Ton, Komatsu #OBW250-2, Gap Frame Double Crank Press, 11.8" stroke, 21.7" Shut Height, 106" x37" bed, 4.7" adj., 40 SPM, 1991
Alma Machinery Co-Columbia TN | Columbia, TN
Category: Gap Frame Double Crank Press Machines
Seller: Alma Machinery Co-Columbia TN
Location: Columbia, TN
Mfr: Komatsu
Model: OBW250-2
Year: 1991
CAPACITY275 US TON STROKE11.81" DIE HEIGHT21.65" BED AREA106.29" X 37.4" (RL X FB) RAM / SLIDE AREA82.67" X 27.55" (RL X FB) BOLSTER PLATE106.29" X 37.4" (RL X FB) X APPROX. 7.1" THICK T-SLOTTED BOLSTER PLATE SPEED20-40 SPM SLIDE ADJUSTMENT4.72" MOTORIZED ADJUST FLOOR TO TOP OF BOLSTER HEIGHTAPPROX. 43.3" DISTANCE ...more
150 Ton LVD #150-JS-10, Press Brake, 10' overall, 102" between housing, 7.9" stroke, 15.8" throat, 15.8" open, 1995
Revelation Machinery | Chicago, IL
Category: Hydraulic Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Model: 150-JS-10
Year: 1995
Make: LVD, Model: 150-JS-10, Year: 1995, Machine Location: Illinois, Tonnage: 150 Tons, Overall Length: 10ft, Distance Between Housings: 8’6″, Stroke: 7.9″, Open Height: 15.75″, Throat Depth: 15.75″, Rapid Approach: 368 IPM, Press Speed: 2 – 59 IPM, Return Speed: 326 IPM, Approx ...more
4 gallon Ross #DPM-4, Mixer, w/ DS-4 Press, Stainless Steel, 2 HP, 230 V., on stand, w/ press, 1999
Federal Equipment Company | Cleveland, OH
Category: Planetary Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Ross
Model: DPM-4
Year: 1999
Used 4 gallon Ross double planetary mixer, model DPM-4, stainless steel product contact surfaces, (2) 4 gallon mixing cans, vacuum cover, driven by 2 hp, with onboard control panel, motorized hydraulic lift with pump, 230 volt, on stand, includes Ross DS-4 press, with.5 hp, 115/230 volt hydraulic pump, on stand, mixer ...more
45 Ton, Betenbender #4X45T, hydraulic press brake, 4' overall, 43" between housing, 6" stroke, 8" throat, front operated manual back gauge, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Betenbender
Model: 4X45T
SERIAL. 24789MODEL. 4 X 45T YEAR NEW. 1989 CAPACITY. 45 TONOVERALL LENGTH OF BED & RAM. 48"DISTANCE BETWEEN HOUSING. 43"STROKE. 6"OPEN HEIGHT. 12"CLOSED HEIGHT. 6"THROAT. 8"FLOOR TO BED. 28"PRESS SPEED. 0 TO 66 IPMRETURN SPEED. 92 IPMDUAL PALM BUTTONS. YESFRONT MATERIAL SUPPORTS. 2FRONT OPERATED MANUAL BACK GAUGE. ...more
200 HP 1800 RPM U.S. Motors, Frame 1504P, VHS, vertical hollow shaft, 440 Volts
Industrial Electric Motor Service | Twin Falls, ID
Category: Vertical Pump Motors
Seller: Industrial Electric Motor Service
Location: Twin Falls, ID
Mfr: U.S. Motors
Frame: 1504P
Quick #N-P80-03-08-EL-1PL-M-40-R-1Z, pneumatic w/motorized open, 38" x 98" platen, 37" side, 80 psi @ 105 psi supply, (24) 12.8" diameter air pods w/5.9" stroke, 40" opening, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quick
Model: N-P80-03-08-EL-1PL-M-40-R-1Z
Year: 2026
QUICK MACHINERY N-P80 Air Pod style Cold Press -- Heavy Duty I-beam construction with machined steel plates for flat smooth pressing surface. -- : -- Platen pressing area size: 38" x 98"; with end loading on 37" side. -- 80 PSI Platen pressure over the entire surface area with 105 PSI supply air pressure. Pressure is ...more
Cincinnati #5, vertical mill, 20" x94-1/2" table, 50 HP, #50 NS, serial #3J5V5J-3, #63742
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: -5
SERIAL. 3J5V5J-3, AREA OF TABLE. 94-1/2" X 20", SPINDLE SPEEDS. (24) 14 TO 1400 RPM, LONGITUDINAL AND CROSS FEEDS. (32) 3/8 TO 90 IMP, VERTICAL FEEDS. (32) 3/16 TO 45 IPM, LONGITUDINAL TRAVEL. 50", CROSS TRAVEL. 18", VERTICAL TRAVEL OF HEAD. 8", VERTICAL TRAVEL OF KNEE. 16", DISTANCE SPINDLE TO TABLE. 0" MIN TO 22" ...more
393 Ton, 27" x 24", 22" daylight, 16" stroke, 20" ram, push-back cyls, Omron PLC, 10 HP, #1814
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
20" DIAMETER RAM WITH APPROX 16" STROKE. 393 TONS AT 2500 PSI. MAX DAYLIGHT APPROX 22.5". FULLY GUIDED WITH 45 DEGREE ADJUSTABLE GIBS. OPERATOR HEIGHT IS APPROX 46". SLAB-SIDES ARE 3.5" THICK WITH 7" WIDE WINDOWS. TWO 3.25" BORE SIDE PUSH-BACK CYLINDERS WITH 25" STROKE. TOP MOUNTED HYDRAULIC POWER UNIT (CAN BE FLOOR ...more
1000 HP 1800 RPM Frame 900P, weather protected enclosure type 1, VHS, vertical hollow shaft, EHT, new, 2300/4000 Volts, with multiple bases
Dykman Electrical, Inc. | Boise, ID
Category: Vertical Pump Motors
Seller: Dykman Electrical, Inc.
Location: Boise, ID
Frame: 900P
Cincinnati Milacron #520-16, dial type vertical mill, 16.25"x87.75"tbl., digital read out
Mohawk Machinery Inc | Cincinnati, OH
Seller: Mohawk Machinery Inc
Location: CINCINNATI, OH
Mfr: Cincinnati Milacron
Model: 520-16
Year: 2010
520-16 CINCINNATI-MILACRON "DIAL-TYPE" VERTICAL MILL - #30516, Serial No 11A45VLAKE-49, Model 520-16, Series E, Trak 2-Axis Digital Readouts, Power Draw Bar - Hard Ways, Power Down-Feed to Head - Turret Depth Stop, Automatic Backlash Eliminator, Coolant System (Built-In), Rack Full Of Tooling, CATALOG :, Table ...more
66 Ton, Amada #SPH-60, hydraulic brake punch, 2.6'OA, 22" between housing, 5.9"stroke, 22.5"open, 1983
Generation Machine Tools | Sarasota, FL
Category: Hydraulic Press Brakes
Seller: Generation Machine Tools
Location: Sarasota, FL
Mfr: Amada
Model: SPH-60
Year: 1983
AMADA SPH-60 66 Ton Brake Punch 1983’ #7906, ImperialMetricTonnage 66 T 59.874 t Type HYD HYD Overall Length 32" 0.8 m Between Housings 22" 0.6 m Dimensions 50” x 70” x 98” H 50” x 70” x 98” H Weight 11,500 Lbs. 11,500 Lbs. AMADA SPH-60 66 Ton Brake Punch 1983’ ...more
500 Ton, Usi Clearing #HGH-500-12-12, Hydraulic Horn Press, 6" Stroke
G-2000 | Toledo, OH
Category: Adjustable Swing Away Bed Horn Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Usi Clearing
Model: HGH-500-12-1
MODEL.: HGH-500-12-12, TONNAGE.: 500, STROKE.: 6", SHUT HEIGHT.: 16-1/2", RAM SIZE.: 12" L-R X 12" F-B, Machine Type.Presses, Hydraulic Manufacturer.USI CLEARING Model.N/A Year.N/A Condition.Used.
100 Ton, Wysong #MTH100-120, Hydraulic Press Brake, 10' overall, 8" stroke, 7" throat, 1998
Revelation Machinery | Chicago, IL
Category: Hydraulic Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Wysong
Model: MTH100-120
Year: 1998
Make: Wysong, Model: MTH100-120, Year: 1998, Machine Location: Washington, Capacity: 100 Tons, Bending Length: 120”, DBH: 102”, Open Height: 17”, Shut Height: 9”, Stroke: 8”, Throat: 7”, Rapid Advance Speed: 300 IPM, Press Speed: 20 IPM, Return Speed: 225 IPM, Approx. Shipping ...more
90 Ton, Dake #Force-50DA, hydraulic H-frame pres, 2 HP, NEW
Smith Machinery Co | Ames, IA
Category: H Frame Hydraulic Press Machines
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Dake
Model: FORCE-50DA
Machine Type H-frame hydraulic powered Capacity 90 tons Ram Travel 16 inches Ram Pressing Speed 11 i.p.m. Horsepower 2 HP Hydraulic Pump Combination power unit Controls On/Off switch with joystick hydraulic control Oil Capacity 3 U.S. gallons approx. Weight 1550 pounds Overall Height 88 inches Base Width 55 inches ...more
30 Ton, Brown #T-345V, High Speed Vertical Trim Press, 145 SPM, 53" width, 30 HP, Panelview+ Control, w/ 2 plate carts, 2021
Arlington Machinery | Lake Zurich, IL
Category: Trimming Presses
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Brown
Model: T-345V
Year: 2021
Used Brown Machine Model T-345V V-Series High Speed Vertical Trim Press S/N 16347 New In 2021 30 Ton 16,711 Hours Max Die Size 57" x 30", Up to 145 Strokes Per Minute 53" Maximum Sheet Width Brown Controls, Allen Bradley Panelview Plus Digital Display 30 HP SEW AC Motor Driven By Allen-Bradley Powerflex 755 Drive ...more
300 Ton, Pacific #300-OBL-10/60, straight side hydraulic press, 12" stroke, 50 HP, 2017
National Machinery Exchange | Newark, NJ
Category: Hydraulic Presses
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Pacific
Model: 300-OBL-10/60
Year: 2017
, SERIAL. A1929, NEW. 2017, MODEL. 300 OBL 10/60, CAPACITY. 300 TON, PUNCH CAPACITY. 200 TON, STROKE. 12", OPEN HEIGHT. 20", CLOSED HEIGHT. 8", BED BOLSTER HEIGHT. 51", BED AREA. 60" X 126", RAM AREA. 60" X 120", BETWEEN HOUSINGS. 130", WINDOWS. 14" X 24", SPEEDS, RAPID. 362 IPM, SPEEDS, FAST PRESS. 134 IPM AT 80 TON ...more
50 Ton, Betenbender #10-50, Hydraulic Press Brake, 120" Bed & Ram length, 102" Between Housings, 8" Stroke, 8" Throat, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Betenbender
Model: 10-50
SERIAL. 164, MODEL. 10-50, CAPACITY. 50 TON, LENGTH OF BED & RAM. 120", DISTANCE BETWEEN HOUSING. 102", STROKE. 8", THROAT. 8", OPEN HEIGHT. 14", CLOSED HEIGHT. 6", PRESS SPEED. 66 IPM, RAPID APPROACH. 66 IPM, RETURN SPEED. 92 IPM, FLOOR TO BED. 28", BACK GAUGE. 24" MANUAL, UP BUTTON. YES, ELECTRIC FOOT PEDAL, ONE ...more
140 Ton, Wysong #THS140-120, high speed, 10' overall, 69" between housing, 8" stroke, 9" adj., #13915
Yoder Brothers Machinery | Toledo, OH
Category: Hydraulic Press Brakes
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Wysong
Model: THS140-120
Dimensions110" H, SERIAL. TH7-101, MODEL. THS140-120, CAPACITY. 140 TONS, OVERALL LENGTH OF BED & RAM. 120", DISTANCE BETWEEN HOUSING. 96" STROKE. 8" ADJUSTMENT. 9" MAX DIE SPACE. 17" "HIGH SPEED" BRAKE. YES, RAM SPEED APPROACH. 300 IPM RAM SPEED PRESS. 20 IPM RAM SPEED RETURN. 225 IPM DUAL PLAM BUTTONS. YES ...more
325 Ton, Standard #AB325-12, hydraulic, 125" between housing, 12' overall, 30 HP, 8" stroke, NEW
Smith Machinery Co | Ames, IA
Category: Hydraulic Press Brakes
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Standard
Model: AB325-12
TONNAGE FORMING/PUNCHING 325/230 DISTANCE BETWEEN HOUSINGS 10 5 BED/RAM LENGTH 12 feet BELOW GRADE no WEIGHT 42000 pounds TOP BED HEIGHT 39 inches BED WIDTH 12 inches THROAT DEPTH 10 inches RAM STROKE (FULLY ADJUSTABLE) 8 inches OPEN HEIGHT 16 inches CLOSED HEIGHT 8 inches HORSEPOWER 30 RAM SPEEDS (IN INCHES PER ...more
Supermax #YCM-2GS, #40 horz. spindle & turret head, automatic feed, digital read out, 1994
AM Metalmaq Inc | Hialeah, FL
Seller: AM Metalmaq Inc
Location: Hialeah, FL
Mfr: Supermax
Model: YCM-2GS
Year: 1994
Select Language Abkhaz Acehnese Acholi Afar Afrikaans Albanian Alur Amharic Arabic Armenian Assamese Avar Awadhi Aymara Azerbaijani Balinese Baluchi Bambara Baoulé Bashkir Basque Batak Karo Batak Simalungun Batak Toba Belarusian Bemba Bengali Betawi Bhojpuri Bikol Bosnian Breton Bulgarian Buryat Cantonese ...more
Cincinnati #415-15, vertical mill, 16-1/4" x79-3/4" table, coolant, power draw bar, #75370
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 415-15
SERIAL. 4A34V5P-12, MODEL. 415-15, AREA OF TABLE. 79-3/4" X 16-1/4", SPINDLE SPEEDS. (24) 16 TO 1600 RPM, LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL FEEDS. (32) 3/16 TO 45 IPM, LONGITUDINAL TRAVEL. 42", CROSS TRAVEL. 16", VERTICAL TRAVEL OF KNEE. 16", VERTICAL TRAVEL OF HEAD. 6", TAPER IN SPINDLE. ...more
Cincinnati #420-16, vertical mill, 16-1/4" x79-3/4" table, 18" throat, coolant, #50NT, #61818
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 420-16
SERIAL. 4A4V5T-3, MODEL. 420-16, AREA OF TABLE. 79-3/4" X 16-1/4", SPINDLE SPEEDS. (24) 16 TO 1600 RPM, LONGITUDINAL & CROSS FEEDS. (32) 3/8 TO 90 IPM, VERTICAL FEEDS. (32) 3/16 TO 45 IPM, LONGITUDINAL TRAVEL. 42", CROSS TRAVEL. 16", VERTICAL TRAVEL OF KNEE. 16", VERTICAL TRAVEL OF HEAD. 6", TAPER IN SPINDLE. #50 ...more
600 Ton, Pacific #K600-16, hydraulic press brake, 16' overall, 170" between housing, 12" stroke, 14" throat, 22" open, Zakron Comp-U-Bend 61000 Axis Back Gauge
Aleco Machinery Sales | Milwaukee, WI
Category: Hydraulic Press Brakes
Seller: Aleco Machinery Sales
Location: Milwaukee, WI
Mfr: Pacific
Model: K600-16
Pre Owned Pacific Model K600-16 Hydraulic Press Brake, Capacity 600 TONS, Overall Length of Bed & Ram 16’, Distance Between Housings 14’ 2”, Stroke 12”, Open Height 22”, Closed Height 10”, Throat Clearance 14”, Width At Top Of Bed 24”, Main Motor Horsepower 50 ...more
Spacer Block, 24.5" X 10.5"
Icon Industries, Inc | Grand Rapids, MI
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
24.5" DIAMETER X 10.5" TALL. WAS USED AS A RAM SPACER IN A 450 TON PRESS. APPROX 1,300 POUNDS. ITEM #2209.
JUST ADDED!
50 Ton, Reis #TUS125-OK-50, hydraulic die spotting & try-out press, 53" stroke, 53" DL, 1991
Perfection Global | Elk Grove Village, IL
Category: Die Tryout and Spotting Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Reis
Model: TUS125-OK-50
Year: 1991
Max. Pressing Force (U.S. Ton): 56 TonMax. Retraction Force (U.S. Ton): 28 TonUpper & Lower Clamping Platen: 48" x 60"Max. Mold Weight: 22,050 lb.Load of Upper Platen: 8,820 lb.Daylight 53"Stroke 53"Rapid Speed: 118 IPMPressing Speed: 19 IPMOpening Speed: 113 IPMMotor Capacity: 10 HP, Reis Control CenterAllen ...more
230 Ton, Cincinnati #230-8AS, CNC hydraulic press w/upgraded controls, 10' overall, 102" between housing, 1985
National Machinery Exchange | Newark, NJ
Category: CNC Press Brakes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Cincinnati
Model: 230-8AS
Year: 1985
230 TON X 10' CINCINNATI MODEL #230-8AS HYDRAULIC CNC, PRESS BRAKE W/ UPGRADED CONTROLS, SERIAL. 43973, MODEL. 230ASX8, YEAR NEW. 1985, UPDATED TOUCHSCREEN CONTROLS. 2011, CAPACITY. 230 TON, OVERALL LENGTH OF BED AND RAM. 10', DISTANCE BETWEEN HOUSING. 8'6", STROKE OF RAM. 10", OPEN HEIGHT. 17", CLOSED ...more
450 HP 1800 RPM Teco, Frame 5009VP, weather protected enclosure type 1, New, VSS, vertical solid shaft, 460 Volts
ESR Motor Systems LLC | Rock Hill, SC
Category: Vertical Pump Motors
Seller: ESR Motor Systems LLC
Location: Rock Hill, SC
Mfr: Teco
Frame: 5009VP
Larox Type PF 12.5 A1 Skid Mounted Vertical Pressure Filter
A M King Industries | Oroville, CA
Category: Plate and Frame Filter Presses
Seller: A M King Industries
Location: Oroville, CA
Mfr: Larox
Model: PF 12.5 A1
LAROX Type PF 12.5 A1 Skid Mounted Vertical Pressure Filter.
JUST ADDED!
150 Tons, LVD #JS-10, CNC Press Brake, 10' overall, 1032" between housing, 7.9" stroke, 15.75" open, 15.75" throat, 1990
Southern Fabricating Mchy Sales | Lithia, FL
Category: CNC Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Lvd
Model: JS-10
Year: 1990
150 Tons X 10’ CNC Press Brake with Hurco Autobend 7 2-Axis Control and Foot Pedal., Tonnage: 150 Tons, Overall Length: 10’, Distance Between Housings: 8’ 6”, Stroke: 7.9”, Open Height: 15.75”, Throat Depth: 15.75”, Rapid Approach: 368 IPM, Press Speed: 2 - 59 IPM, Return ...more
200 Ton, Press Master #CFP-200, hydraulic C-frame press, 15" stroke, 20" daylight, 13" throat
Machinery Values Inc | Harrison, NJ
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: CFP-200
200 TON PRESSMASTER HYDRAULIC C-FRAME PRESSMODEL CFP-200T… BRAND NEW RATED CAPACITY. 200 TONSAPPROACH SPEED. 65 IPMPRESSING SPEED. 6 IPMRETURN SPEED. 78 IPMTABLE WIDTH.″5"TABLE DEPTH. 22"U-SLOT WIDTH. 4"DAYLIGHT. 20"FULL STROKE. 15"THROAT. 13"TABLE ...more
125 Ton, Dake #18-151, 4-Post Hydraulic Press, 43" x 50" Bed, 20" Stroke, 40" Daylight, 34 IPM
Machine Tool Bids | Chicago, IL
Category: Hydraulic Presses
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Dake
Model: 18-151
MACHINE, Tonnage: 125, Bed Size: 43" x 50", Stroke: 20", Daylight: 40", Speed: 34" Per Minute, Pressing Speed: 17" Per Minute.
24" Sour Vertical Separator, 1140 psi, 3-phase, 2013
IronHub | Calgary, AB
Category: Vertical Separators
Seller: IronHub
Location: Blackfalds, AB
Year: 2013
Available for sale: RJV separator for sour service, featuring a 24-inch diameter and a maximum temperature of 100°F. This unit, built in 2013, has a maximum pressure rating of 1440 psi and measures 7.5 feet in length. It is portable and designed to be positioned vertically. The operational status is currently ...more
150 Ton, Press Master #RTP-150, 16" stroke, roll-in bed, 4-Axis, powered hydraulic roll-in table, #160046
Machinery Values Inc | Harrison, NJ
Category: H Frame Hydraulic Press Machines
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Press Master
Model: RTP-150
150 TON PRESSMASTER ROLL-IN TABLEFULL 4 AXIS POWERED STRAIGHTENING PRESS RATED CAPACITY. 150 TONSWIDTH BETWEEN UPRIGHTS. 48"DEPTH BETWEEN POSTS. 16-3/4"MAXIMUM RAM TO TABLE. 26-3/4"STROKE. 16"TABLE TRAVEL. 23.25"FLOOR TO TABLE TOP. 25-3/4"CYLINDER BORE SIZE. 11"PRESSING SPEED. 6 ...more
Wells-Index, vertical knee mill, 2 HP, power feed
Bay Area CNC Machinery | Walnut Creek, CA
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Wells-Index
Make: Wells-Index, Spindle Power: 2 HP, s: Power Feed Table, Type: Vertical Knee Mill.
275 Ton, Durmapress #HAP275, Hydraulic Press Brake, 10', 12" stroke, 20" daylight, Belem DA69T Control, 6 Axis, Back Gauge, CE compliant, 2023
Revelation Machinery | Chicago, IL
Category: Hydraulic Press Brakes
Seller: Revelation Machinery
Location: Chicago, IL
Model: HAP275
Year: 2023
Make: Durmapress, Model: HAP275, Year: 2023, Machine Location: Upon Request, – Press Capacity: 275 tons, – Bending Length: 10 feet (3,050 mm), – Ram Stroke: 12″ (305 mm), – Daylight Opening: 20″ (508 mm), – Backgauge: 6+1 programmable axes, – Controller: Belem DA69T CNC ...more
200 Ton, Eagle #PH2-200-118-48, hydraulic 4-post press, 48" stroke, 68" DL, 118" x48" bed, Allen Bradley PanelView 550 Control, 250 gallon reservoir, 1998
Westway Machinery Ltd | Mississauga, ON
Category: CNC Press Brakes
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Eagle
Model: PH2-200-118-48
Year: 1998
MODEL ph2-200-118-48, S:, Floor standingAllan Bradley PanelView 550 control250 gallon reservoir, MODEL: PH2-200-118-48, CAPACITY: 200 ton @ 4000 PSI, LIFTING FORCE: 40 ton, SERIAL#: EP-98-102194, STROKE LENGTH: 48”, DAYLIGHT: 68”, BED SIZE (L-R, F-B): 118” x 48”, APPROACH SPEED: 475 IPM ...more
Bruderer AG #STG-20/6369, Stamping Press, 16" x 22", 220 V., 26.8 HP, 1983
HGR24 | Euclid, OH
Category: High Speed and Automatic Presses
Seller: HGR24
Location: Euclid, OH
Model: STG-20/6369
Year: 1983
Inventory No. 0126-083-0001 Manufacturer Bruderer Ag Model No. BSTA 20 Name Stamping Press Arrival Date 01-30-2026 Dimensions L x W x H (inches) 65 x 71 x 114 Electrical 60/220 Weight (lb.) 8250 Category Fabrication Condition Used Available Quantity 1 Serial No. 20 079 Make Year 1983 Item 16" X 22", 20 Kw, Made In ...more
Schultz Tool Veneer Bladder Membrane Press
Carolina Machinery Sales | Monroe, NC
Category: Woodworking Presses and Cold Presses
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Schultz
Schultz Tool Veneer Bladder Membrane Press, Seller′s Soecification:, - Veneer Membrane Press, - Approx. 55″x106″ press capacity, - Hot air design w/ 3mm silicone membrane, - –, - Typical cycle time of 3 min. using proper glue that sets at 200° F, - Can use PVA, but extends cycle time to ...more
175 Ton, Wysong #MTH175-144, hydraulic press brake, 14' overall, 150" between housing, 8" stroke, 15 HP, 1997
Yoder Machinery Sales | Holland, OH
Category: Hydraulic Press Brakes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Wysong
Model: MTH175-144
Year: 1997
SERIAL. MT17-101MODEL. MTH175-144YEAR NEW. 1997BED LENGTH. 168"BETWEEN THE HOUSINGS. 150"STROKE. 8"OPEN HEIGHT. 17"SHUT HEIGHT. 9"THROAT. 8"RAM TILT. 1/4"APPROACH SPEED. 300 IPMPRESS SPEED. 22 IPMRETURN SPEED. 250 IPMPASS LINE. 34"FLOOR STANDING. NO PIT REQUIREDMOTOR. 15 HORSEPOWER.
100 Ton, Clifton #1P, 4-post platen press, 10" stroke, 23" daylight, auto/manual modes
Wheeler Machinery Sales | Pomona, CA
Category: Hydraulic Platen Press Machine
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Clifton
Model: 1P
Clifton 1P 4-Post Platen Press 100 Ton #6845, Maximum Pressing Capacity: 100 Ton, Stroke: 10", Daylight Opening: 23", Platen Size: 12" x 12", Distance Between Posts: 17" L-R x 10" F-B, Operating Pressure: 125 PSI, Ram Diameter 10", Main Motor: 3 HP, Auto/Manual Modes.
160 Ton, Betenbender #12-160T, hydraulic press brake, 12' overall, Betenbender 2-Axis Control, foot pedal
Southern Fabricating Mchy Sales | Lithia, FL
Category: Hydraulic Press Brakes
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Betenbender
Model: 12-160T
160 Ton X 12’ Hydraulic Press Brake with Betenbender 2 - Axis Control and Foot Pedal, Capacity: 160 Tons, Bending Length: 144”, Open Height: 14”, Stroke of Ram: 8”, Throat Depth: 8”, Rapid Approach Speed: 68 IPM, Pressing Speed: 31 IPM, Return Speed: 86 IPM, Bed Height: 37”, Motor: ...more
230 Ton, Cincinnati #230-8AS, CNC hydraulic press brake w/updated controls, 10' overall, 102" between housing
National Machinery Exchange | Newark, NJ
Category: CNC Press Brakes
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Cincinnati
Model: 230-8AS
230 TON X 10' CINCINNATI MODEL #230-8AS HYDRAULIC CNC, PRESS BRAKE W/ UPGRADED CONTROLS, SERIAL. 43974, MODEL. 230ASX8, UPDATED TOUCHSCREEN CONTROLS. 2011, CAPACITY. 230 TON, OVERALL LENGTH OF BED AND RAM. 10', DISTANCE BETWEEN HOUSING. 8'6", STROKE OF RAM. 10", OPEN HEIGHT. 17", CLOSED HEIGHT. 7", RAM ...more
