Buy or Sell Your Nardini Machines

SERIAL. D5JFX939, CONTROL. Fanuc 20T CNC, SWING. 20”, CENTERS. 80”, SPINDLE HOLE. 3.125”, 2-Axis, SPINDLE SPEEDS. 20 TO 3,000 RPM, CHUCK. 12” 3-Jaw, Steady Rest.

Never Used Nardini 25″ x 92″ Gap Bed Engine Lathe IMTS Show Lathe, Like New, Never Used, Swing Over Bed: 25″, Swing in Gap: 32″, Swing Over Cross Slide: 18″, Distance Between Centers: 92″, Spindle Hole: 1-15/16″, RPM: 20 – 1600, Threading In/MM, 4 Way Tool Post ...more

NARDINI 25" X 92" GAP BED ENGINE LATHE, MODEL | ND-325, SWING OVER BED | 25", SWING IN GAP | 32", SWING OVER CROSS SLIDE | 18", DISTANCE BETWEEN CENTERS | 92", SPINDLE HOLE | 1-15/16", RPM | 20-1600, THREADING | IN/MM, SPINDLE NOSE | L0, QUILL TAPER | 4 MT, 4 WAY TOOL POST, 10" 3-JAW CHUCK, MOTOR | 10 HP 240V/3PH ...more

17.5" X 40" NARDINI "FAST TRACE" CNC LATHE, SERIAL NO D4JEO-105, TYPE FAST TRACE, 17.5" X 40" NARDINI "FAST TRACE" CNC LATHE, SERIAL NO D4JEO-105, TYPE FAST TRACE, GE/FANUC 20T CNC CONTROL W/TEACH MODE, 10" 3-JAW CHUCK W/JAWS, Tailstock, COOLANT PUMP, CATALOG :, Spindle Bore Diameter 2", Swing Over Bed, Maximum 17.5" ...more

NEW. 1995, SWING OVER WAYS. 17.3", SWING OVER CROSS SLIDE. 10.625", GAP BED. YES, CENTER DISTANCE. 60", HOLE THROUGH SPINDLE. 2.03", CROSS SLIDE CROSS TRAVEL. 9.75", TOP SLIDE TRAVEL. 5", TAILSTOCK SPINDLE. 2.375" DIA X 8.625" TRAVEL, TAILSTOCK TAPER. #4 MT, SPINDLE SPEEDS. (18) 25 TO 2000 RPM, CARRIAGE LONG FEEDS. ...more

NARDINI FRD-60 5’ x 15” Radial Arm Drill #5MT #8183, NARDINI FRD-60 5’ x 15” Radial Arm Drill #5MT #8183, Reference # 8183, Model # FRD-60, Drilling capacity- 2.36” Mild steel / 3.15” Cast iron, Boring capacity- 3.94” Mild steel / 4.72” Cast iron, Tapping capacity- ...more

MODEL. SZA25160T, SWING OVER WAYS. 25-5/8", SWING OVER CROSS-SLIDE. 17-5/16", SWING IN GAP. 33-7/8", LENGTH OF GAP. 12-1/4", DISTANCE BETWEEN CENTERS. 160", SPINDLE SPEEDS. (18) 19 TO 1500 RPM, FEEDS. 0.08 TO.02653" IPR, THREADS, INCH. 2 TO 42 TPI, THREADS, METRIC. 0,4 TO 35 MM, THREADS, MODULE. 0.20 TO 15 MOD ...more

This listing is for a Nardini #SZ2040T Engine Lathe., Manufacturer: Nardini, Serial: D3JDR130, Model: SZ-2040T, Swing Over Bed: 20", Swing in the Gap: 27-1/2", Swing Over Cross Slide: 12-1/2", Distance Between Centers: 40", Spindle Speeds: (18) 19 to 1500 RPM, Hole Through Spindle: 3-1/8", Threads, Inch: (64) 2-3/4 to ...more

NARDINI MASCOTE MS-1440E 14”/19.75” x 40”cc Gap Bed Lathe #7767, NARDINI MASCOTE MS-1440E 14”/19.75” x 40”cc Gap Bed Lathe #7767, Reference # 7767, Model # MS-1440E, Serial # BHEMMS144, Swing over bed- 13-3/4”, Swing over cross slide- 7-7/8”, Swing through removable gap- ...more

, Used NARDINI Nodus ND1760 Gap Bed Engine Lathe, 17"/24" x 60", featuring AcuRite DRO, taper turning attachment, 12" 3-jaw chuck, Dorian quick change toolpost, and hardened ground bedways. Includes coolant system and removable chip pan., Spec Sheet:, S/N: D5JFP546, SWING OVER BED. 17-1/4", SWING IN REMOVEABLE GAP. ...more

Muller Martini Corona C18 perfect binding line installed in 2013 and configured with a Muller Martini 3691 gathering system, Zenith-S 3672 three-knife trimmer, and CB16 stacker with counting. This complete binding line is designed for efficient production of books, catalogs, manuals, and commercial print products. The ...more

Muller Martini Corona C12-31 perfect binding line configured for softcover book production using hotmelt or other adhesive. This complete line includes a 23-station Muller Martini 3695 gathering system, 31-clamp perfect binder, three-knife trimmer, stacker, and palletizing system., Manufacturer: Muller Martini, Model: ...more

Stock #: 114250403, Location: Decatur, GA, Brand: Superior Cincinnati / Hardinge, Model: "S" Style, Approx. Shipping Weight: 50 lbs, Approx. Shipping Dimensions: 2' L x 2' x 2' H, (12) SC Hex Collet Pad Sizes: 1/4, 5/16, 3/8, 1/2, 9/16, 5/8, 3/4, 7/8, 15/16, 1, 1-1/8, 1-1/4, (19) SC Round Collet ...more

1989 Muller Martini Norm perfect binder configured with 18 gathering stations and 20 clamps with three knife trimmer, forming a complete binding line. A proven, straightforward system for book, catalog, and commercial print production, offering durable construction, simple operation, and consistent performance. Well ...more

HARDINGE TFB Precision Tool Room Lathe USA #8119, HARDINGE TFB Precision Tool Room Lathe USA #8119, Reference #8119, Model # TFB, Serial # HLVH-H-4973, Swing over bed- 11”, Swing over carriage- 9”, Swing over cross slide- 6”, Distance between centers- 18”, Spindle bore- 1-1/4”, Spindle ...more

CSM GTC6 CNC Lathe, manufactured by CSM, is available in used condition., X) Axis Travels - 11.75", (Z) Axis Travels - 7.5", Spindle Motor - 5 HP, Spindle Bore - 1.275", Spindle Taper - 5C, Spindle Speeds - 0 - 4,500 RPM, Max Bar Size - 1 1/16", Standard Hardinge Tool Holders - 1/2", Axis Thrust - 600 lbs., Feed Rate ...more

Spec Sheet:, 11 x 18 Hardinge HLV-H-EM Tool Room Lathe, Spindle construction- HARDINGE ball bearing, Spindle nose- Hardinge Tapered, Spindle capacity with round type 5C collets- 1-1/16", Spindle capacity with step chucks- 1-1/16" to 6", Spindle capacity with jaw chucks- 5, Spindle capacity with expanding collets- 3 ...more

Serial No. HLVH-8676T, New - 1990, Motor driven with 2-Speed, 3/60/230 volt variable speed drive unit with direct reading spindle speed indicator and controls. Hardinge Super-Precision ball bearing spindle. Hardinge tapered spindle nose. Tool storage compartment. Built-in coolant system. Hardened and ground dovetail ...more

Product Hardinge HLV-H Precision Toolroom Lathe IN/MM with DRO, Serial# 15276-T, New 1997, SPINDLE CONSTRUCTION ……………. HARDINGE BALL BEARINGSPINDLE NOSE – Hardinge Taper LockSPINDLE CAPACITY: WITH ROUND TYPE 5C COLLETS ……. 1-1/16″WITH STEP CHUCKS ...more

Spec Sheet:, Hardinge Super Precision Toolroom Lathe, Model #: TBF-H, Spindle Motor: 1.5 Hp, 220v, 3ph, 60 Hz, Taper Attachment, Collets and Tooling Included, Control Voltage: 115V, Swing Over Bed: 11", Swing Over Carriage: 9", Swing Over Crosslide: 6", Distance Between Centers: 18", Spindle thru hole: 1.25", Spindle ...more

Hardinge 11″ x 18″ Super Precision Toolroom Lathe, HLV-H – SALE PENDING 01/13/2026, Inventory # 9175, Model: HLV-H, S/N: HLV-H-1936 – Machine Has Been Completely Gone Through, Serviced, and Rebuilt – Comes with a One-Year Parts Warranty, Swing Over Bed: 11″, Swing Over Carriage: ...more

HARDINGE PRECISION CHUCKING LATHE MODEL: HC, S/N: HC 8428-T, NEW: 1990 :MAX FIXTURE DIAMETER. 9"MAX DISTANCE FROM FACE OF TURRET TO SPINDLE. 14"SPINDLE CAPACITY WITH ROUND 5C COLLETS. 1-1/16" WITH 5C STEP CHUCKS. 1-1/16" TO 6" WITH JAW CHUCKS. 6"SPINDLE TAPER. HARDINGE THREADED NOSETRAVEL ...more

HARDINGE PRECISION TOOL ROOM LATHE, PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $12,500.00, HMC Stock # 22162, Machine Serial No.: HLVH-4827, Machine Model No.: HLVH, New Date: 1971, Swing Over Bed: 11", Swing Over Carriage: 9", Swing Over Cross Slide: 6", Distance Between Centers: ...more

, 11" x 18" Hardinge HLV-H Wide Bed Lathe, ideal for toolroom use. s: 1.5 HP, 3000 RPM, 11" swing, 20" centers, 1.25" spindle bore. Comes with inch threading, tailstock, tool post, 5C collet closer, and 6" 3-jaw chuck., Spec Sheet:, Hardinge HLV-H Wide Bed Tool Room Lathe, SPEC SHEET, Max Swing Over Bed: 11, Max Swing ...more

availability of Müller Martini Corona perfect binders, including C12, C13, C15, and C18 models. These high-speed softcover binding systems are widely used for books, catalogs, manuals, educational materials, and commercial finishing applications., MLLER MARTINI CORONA PERFECT BINDERS, Models: C12, C13, C15, C18 ...more

NABTESCO RV-450E-171 Gear reducer available, used condition. High-quality performance from a trusted manufacturer, reliable for various applications. Ideal for projects requiring durable and efficient power transmission., Spec Sheet, NABTESCO RV-450E-171, Dimensions. 17X17X9, Weight. 110LBS.