Machine Tool Technologies
Milwaukee, WI 53224
Platinum Level Dealer
Surplus Record Dealer Since 2011
Contact
About
Founded in 1984, Mac-Tech has been serving the metal fabrication industry for over 40 years. We specialize in providing advanced machinery, expert service, and trusted support to fabricators across North America.
Our mission is simple:
Helping Metal Fabricators Sleep at Night
This means giving our customers peace of mind — through dependable equipment, responsive service, and a team that’s always ready to go the extra mile.
Products & Services
- Brakes, Press
- Broaching Machines
- CNC Machinery
- Folders
- Lasers
- Lathes, CNC
- Presses
- Shears
- Welding Equipment
Associations & Affiliations
268 listings in 44 categories
4-Roll Plate Bending Machines
1 Result
Roccia #HR4W3014, plate roll, 4-roll, 2012
Category: 4-Roll Plate Bending Machines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Roccia
Model: HR4W3014
Year: 2012
4 Roll.
3" x 3" Akyapak #APK-81, angle bending roll, 9.65" roll diameter, 3.15" shaft, new
Category: Angle Bending Rolls
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Akyapak
Model: APK-81
APK 81 ANGLE BENDING ROLL:, ï § One set standard rolls, ï § All-steel (St-52) construction body, ï § Shafts are made of special steel, hardened and grinded, ï § Bottom rolls hydraulically moveable up and down, ï § Digital display for bottom rolls, ï § ...more
C Frame Hydraulic Press Machines (Gap Frame)
1 Result
250 Ton, Pacific #250PF-OBS, 12" stroke, 34" x58" bed, dual palm & foot controls, 1985
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Pacific
Model: 250PF-OBS
Year: 1985
Carbide, Friction and Cold Saws
2 Results
9.5" x 3.14" Kaltenbach #KKS-400-EC-NA, 17.7" blade, 5 HP, 39 IPM
Category: Carbide, Friction and Cold Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Kaltenbach
Model: KKS-400-EC-NA
Spec, KALTENBACH KKS 400 EC NA.
Baileigh #CS-70NC, Tungsten carbide automatic cold saw, Monitouch V9 CNC Control, 10" blade diameter, 10 HP, 2008
Category: Carbide, Friction and Cold Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Baileigh
Model: CS-70NC
Year: 2008
2008 Baileigh CS-70NC Tungsten Carbide Automatic Cold Saw, Blade Dia 10" Power 10 hp Weight 5800 (LBS) Control CNC (Monitouch V9) Updated PLC & monitor (installed 2024), Spec Sheet Motor (HP) 10 hp, Solid Round at 90 Degrees (In.) 2.75", Style (Type) Single Action with Hydraulic Feed, Tubing Rectangle at 90 ...more
Scotchman #SUP-600-NF, high speed upcut circular saw, non-ferrous, 24" blade diameter, 5.5 HP, 2018
Category: Circular Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Scotchman
Model: SUP-600-NF
Year: 2018
2018 Scotchman SUP-600-NF Upcut Circular Cold Saw for Non ferrous Material, Blade Dia 24" Dimensions 55" L x 50" W x 65" H Weight 1465 lbs Spec Sheet Maximun Cutting Capacities (Non-Ferrous & PVC ):, Round 90°: 9", Square 90°: 8", Rectangle 90°: 15" x 6", Round 45°: 9", Square 45°: 7" ...more
CNC Beam/Drill Lines
5 Results
Amtek #APC-1200, beam coping system, plasma/oxy-fuel/fiber layout
Category: CNC Beam/Drill Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amtek
Model: APC-1200
AMTEK APC 1200 Beam Coping System, Plasma / Oxy-Fuel / Fiber Layout, Full Material Handling Package Included, Machine Overview, The Amtek APC 1200 is a 5-axis CNC beam coping system designed for structural steel fabrication. Capable of cutting and coping on 3–4 sides of a profile, it processes beams, channels ...more
Controlled Automation #Revolution, beam coping machine, Hyertherm HPR260XD, 48" material width, 2014
Category: CNC Beam/Drill Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Controlled Automation
Model: REVOLUTION
Year: 2014
Hypertherm HPR260XD Spec Sheet Maximum Material lbs/ft: 1,000 lbs/ft (138.3kg/m), Plasma System: Hypertherm, Maximum Material Width: 48" (1,220mm), Maximum Hole Size: Unlimited Flange and Web Capacity: 3" (plasma edge start) / Oxy-Fuel provided for anything beyond Automatic Tool-Changer: Plasma, Oxy-Fuel and Optional ...more
Ficep #1201DE, Beam Drill Line, Pegaso REX12 controls, 2015
Category: CNC Beam/Drill Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ficep
Model: 1201DE
Year: 2015
Spec, FICEP 1201DE, The FICEP Excalibur 12 (1201DE) is a space-efficient beam drilling machine requiring only 50% of the floor space of conventional lines. Its cantilevered drill system does not touch the floor, while a 4,000 RPM ball screw spindle feed maximizes carbide tooling performance. The sub-axis positions ...more
Ficep #Gemini-G36HD, CNC plasma cutter/drill line, 40' x 12', 2018
Category: CNC Beam/Drill Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ficep
Model: GEMINI-G36HD
Year: 2018
Ficep Gemini G36HD CNC Plasma Cutter/Drill Line 40' x 12', 2018, Well maintained and under power for inspection., Table Width 12', Table Length 40', Control: Fanuc Series 31i-Model B5, Power Source: Hypertherm 400 XD, Spindle: 20HP, Power Requirement: 460/60, (2) Dust Collectors,(3) Oxy Torch, 400A Plasma Bevel Head ...more
Peddinghaus #PeddiAssembler, structural steel burning system, 2021
Category: CNC Beam/Drill Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Peddinghaus
Model: PEDDIASSEMBLER
Year: 2021
Dimensions 28280mm x 11074mm Weight 30850 lbs Control CNC (Siemens Simatic S7 unit w/ pro-FIT Software) PeddiAssembler Quotation Summary Equipment s: Integrated Profile Turning Devices Table for Additional (Add) Parts Add Part Laser Scanning System Handling Robot for Additional (Add) Parts Robotic Weld System ...more
CNC Folding Machines (Folders)
66 Results
72" Fasti #FP-60-32/6, CNC metal folder, 15" stroke, .25"
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Fasti
Model: FP-60-32/6
MACHINE, STROKE (SPM) 15.74", MAX WORKPIECE THICKNESS 0.25", MAX BENDING LENGTH 127", OA LENGTH 172", CLAMPING SPEED 141 IPM, BENDING SPEED 90"/SEC, CAPACITY.250 IN., TENSILE STRENGTH 58000 LB./ SQ. IN., MACHINE IS THE FOLLOWING:, * PENDENT CONTROL, * BACK GAUGE, * MISC TOOLING.
85" Ras #79.22-2, Multibend Center, Working Length: 2160 mm/ 7.09' ft., 1500 mm/ 4.92' ft. sheet width, 18KW, 18.04' ft. approx., 2012
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: 79.22-2
Year: 2012
Spec, Max Thickness: 0.0787″, Max Thickness (gauge): 14 gauge, Overall Length: 85″, • Working Length: 2160 mm/ 7.09’ ft. Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm Maximum Sheet Metal Thickness: Aluminum – ...more
120" Erbend #MFB3220, CNC folder, 14 gauge, 1500mm Back Gauge, 2D touchscreen controller
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFB3220
MODEL: MFB 3220, MAX SHEET LENGTH: 10.49 ft, MILD SHEET: 2mm / 0.078" (14g), STAINLESS: 1.2mm / 0.047" (18g), ALUMINUM: 3mm / 0.118" (11g), DIMENSIONS:W x L x H 90.55" / 175.19" / 74.80", WEIGHT: 10,362 lbs, CLAMPING BEAM (Z-AXIS), DRIVE POWER (SEW AC MOTOR W/ ENCODER): 2 hp, OPENING ...more
120" Erbend #MFC3215, CNC folder, 16 gauge, 1000mm Back Gauge, 2D touchscreen controller
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFC3215
Spec, ERBEND MFC, The Erbend MFC industrial folding machine is a high-quality machine that supports commercial needs for metal fabrication. Any company that folds metal on a regular basis can benefit from this machine. Of course, this machine makes your daily operations significantly easier. As a result, the Erbend ...more
120" Erbend #MFD-3220, 10' x 14 gauge folder, Erfold Advanced CNC Graphic software, 2019
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFD-3220
Year: 2019
STANDARD TECHNICAL, MAX FOLDABLE SHEET LENGTH: 10.49 ft (3220mm), MAX THICKNESS CAPACITY IN FULL LENGTH: 0.078" (14g) STEEL, CLAMPING BEAM (Z AXIS), Drive Power SEW AC Motor 1.5hp, Opening Height No Tools 6.3in, Clamping Speed: 1.98 in/sec, FOLDING BEAM (Y AXIS), Drive Power SEW AC Motor 3hp, Folding Angle 0-150 ...more
120" Erbend #MFD3220, CNC Combi beam folder, 14 gauge, 1500mm back gauge, 3D touchscreen Control and Quick Clamp pneumatic tool system
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFD3220
160 mm (6.30 in) stroke capacity on 180° rotating combi clamping beam with 2 tool stations as 90 mm (3.54 in) high segmented goat foot tools on station 1 and 20° single piece sharp nose tool on station 2, 90 mm (3.54 in) high segmented goat foot tools, Manual folding beam adjustment as 80 mm (3.15 in), CNC ...more
120" Erbend #MFE3240, CNC folder, 9 gauge, 1500mm back gauge, 3D touchscreen Control, motorized A drive, servo drive motors
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFE3240
Each axis on the machine is servo motor driven, 160 mm (6.3 in) stroke capacity with no tools and, Motorized A-axis (Servo), 30° sharp nose clamping beam, 1000 mm (39.37 in) motorized back gauge and sheet support table with ball casters, Basic CNC line by line controller software on 15.4" touchscreen ...more
120" RAS #73.3-FlexiBend, 11 gauge, Series 600 touch screen control, 2017
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: 73.3 FLEXIBEND
Year: 2017
Spec, Max Thickness: 0.0591″, Max Thickness (gauge): 11 gauge, Overall Length: 10′, Dimensions: 172″L x 82″W x 54″H, Weight: 9,460 lbs, Control: CNC (System 6000), Working Length: 125.9″ Material Thickness Max: 11 ga Beam Adjustment (Upper & Lower): 3.15″ Folding Beam ...more
120" RAS #78.30, CNC up down folding machine with u shaped gauging system, 9 gauge, 2007
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: 78.30
Year: 2007
120" RAS #TurboBend-Plus-62.3, folder, 14 gauge, work length 125.9", work height 33.5", 2017
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: TURBOBEND-PLUS-62.3
Year: 2017
120" Roper Whitney #AB1014K Autobrake 2000, CNC folder w/Combi beam and segmented tools, 14 gauge, 1994
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Roper Whitney
Model: AB1014K
Year: 1994
Make Roper Whitney, Model Autobrake 2000, Year of MFG 1994, U.S. Std. Metric, Maximum Bending Length 122" 3100mm, Rated Bending Capacity, Mild Steel 14 gauge 2mm, Back- gauge Weight Capacity 700lbs. 318kg, Back-gauge Travel 61" 1550mm, Working height 35" 889mm, Open height 5.3" 135mm, Bending beam ...more
120" Roper Whitney #AB1016, Orion controller, 16 gauge, 2006
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Roper Whitney
Model: AB1016
Year: 2006
Spec, ROPER WHITNEY AB1016.
120" Schechtl #310, 16 gauge thickness, 39.5" back gauge, 2006
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Schechtl
Model: 310
Year: 2006
Make:Schechtl, Model: 310, Year of MFG: 2006, Max Thickness (gauge): 16 Gauge, Overall Length: 10', Working Length: 122", Capacity: 16 ga CRS, Maximum Closed Hemming Capcity: 24 ga CRS, Upper Beam Stroke: 4.7", Folding Beam Speed: 85°/sec, Folding Beam Arc with 20°: 0°-160°, Upper Beam Speed: ...more
122" x 14 gauge Cidan #PF-1014S, folder, 10' overall, Prolink cnc, 2008
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cidan
Model: PF-1014S
Year: 2008
Brand - CIDAN, Model - PF-1014S, ID #699229, Type - Folding Machines, Condition - Used - Good, Year - 2008, Location - Wisconsin, United States, Return Policy - as-is, Stock #LA, Used 2008 Cidan PF-1014S Folder, Convert to Metric, Max Thickness (gauge) 14 gauge, Overall Length 122", Weight 8300, Control CNC (Prolink) ...more
122" Roper Whitney Pexto #AutoBrake2000, 1014K, 1996
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Roper Whitney Pexto
Model: AUTOBRAKE2000
Year: 1996
Make Roper Whitney, Model Autobrake 2000, Year of MFG 1996, U.S. Std. Metric, Maximum Bending Length 122" 3100mm, Rated Bending Capacity, Mild Steel 14 gauge 2mm, Back- gauge Weight Capacity 700lbs. 318kg, Back-gauge Travel 61" 1550mm, Working height 35" 889mm, Open height 5.3" 135mm, Bending beam adjustment 2.0" ...more
125.98" RAS #Flexibend-73.30, 2002
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: FLEXIBEND 73.30
Year: 2002
Measurements width: 4295 mm Measurements depth: 2225 mm Measurements height: 1775 mm Machine weight: 4300 kg Main drive, Bending length: 3200 mm Max Material thickness, Steel: 3 mm Additional Information, Machine Benefits, Technical Machine Benefits: - Upper beam open height 300 mm - Cnc lower beam adjustment 80mm - ...more
126" Ras #62.30, 14 gauge thickness, 3 HP, 1998
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: 62.30
Year: 1998
126" RAS #Flexibend-73.30, CNC folder, 126" x 11 gauge, System 6000 CNC Control, 2015
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: FLEXIBEND-73.30
Year: 2015
2015 RAS FlexiBEND 73.30 126" x 11 Gauge CNC Folder, Machine is under power and available to be inspected., Max Thickness 0.0591" Max Thickness (gauge) 11 gauge Overall Length 10' Dimensions 172″L x 82″W x 54″H Weight 9,460 lbs Control CNC (System 6000) System 6000 Touch & More Touch Screen ...more
126" RAS #XL-Center-63.30, folding machine, Beckhoff CNC Control, 16 gauge thickness, 2024
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: XL-CENTER-63.30
Year: 2024
Max Thickness 0.048" Max Thickness (gauge) 16 gauge Overall Length 126" Dimensions 130" x 67" x 79" Weight 12,000 Control CNC (Beckhoff CNC), ***CALL Louie at 847-627-6009 for more or a quote***.
126" Tennsmith #SBS12614, folder, 14 gauge, 2009
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Tennsmith
Model: SBS12614
Year: 2009
Listing Information, ID # 677633, Stock # LA, Brand TENNSMITH, Model SBS12614, Type Folding Machines, Control CNC, Year 2009, Condition Used - Good, Return Policy as-is, Location Wisconsin, United States, Tennsmith Model SBS12614 10′ x 14-ga Folder - Under Power and available to be inspected, Max Thickness ...more
127.2" Erbend #MFD-3220, folding machine, 14 gauge, Erfold Control, 39.37" servo Back Gauge, 2022
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFD-3220
Year: 2022
Used 2022 Erbend MFD3220 CNC Folder, ERFOLD BASIC CNC LBL CNC control software on 15.6" touchscreen controller with swivel arm, Solid lower beam tool without channels, Front light barriers Spec Sheet Max Thickness 0.08", Max Thickness (gauge) 14 gauge, Overall Length 10.49', Control CNC (ERFOLD graphical CNC Control) ...more
128" Schroder #PowerBend-Pro-3200/3.0, Folding Machine, 11 gauge, POS3000 CNC, 2016
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Schroder
Model: POWERBEND-PRO-3200/3.0
Year: 2016
Brand – SCHRODER, Model – POWERBEND PRO 3200/3.0, Type – Folding Machines, Year – 2016, Condition – Used – Good, Max Thickness (gauge) 11 gauge, Overall Length 127.5″, Weight 18,000, Control CNC (POS3000), SPEC SHEET, Working Length: 127.5″ (3240 mm), Bending Capacity ...more
156" Cidan #K25-40, combi folding beam type, 135mm upper beam stroke, 2012
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cidan
Model: K25-40
Year: 2012
156" Erbend #MFA4225, CNC folder, 13 gauge, 1500mm back gauge, 3D touchscreen Control, servo motors, motorized A, Quick Clamp tool system
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFA4225
Spec, ERBEND MFA, The Erbend MFA folding machine has many standard s that meet most fab shops’ needs. We also offer several optional s to expand the abilities of your machine. Check out the s below and fill out the form to order yours; you can also reach out if you have any further questions.
156" RAS #Flexibend-73.40, CNC, automatic folding beam adjustment, automatic lower beam adjustment, 2021
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: FLEXIBEND-73.40
Year: 2021
156.25" Roper Whitney #AB1014K, combi folding beam type, Prolink CNC Control, 2018
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Roper Whitney
Model: AB1014K
Year: 2018
Make Roper Whitney, Model AB1014K, Year of MFG 2018, Working Length 4050mm (13.25’), Capacity 14g, Upper Beam Stroke 135mm, Folding beam type Combi, Backgauge Depth 1 meter, Closed Hem Capacity 24g, Electrics 3 phase, Weight 4,400 kg, Length 5180 mm, Depth 1600 mm, Height 1700 mm, CNC Control Prolink, Tooling: ...more
160" Ras #Flexibend-73.40, .0984" thickness, 13 gauge, 2005
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: FLEXIBEND-73.40
Year: 2005
Make RAS, Model Flexibend 73.40, Year of MFG 2005, Max Thickness 0.0984", Max Thickness (gauge) 13 gauge, Overall Length 160", Product Overview: The FLEXIbend metal folding system is a study in flexibility. There are almost no limitations to your imagination, when you want to create unique, complex parts with a high ...more
165" Erbend #Dual-MFA4225, up/down folder, 2024
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: DUAL MFA4225
Year: 2024
Including the following s……, COMBI UPPER BEAM WITH 2 TOOLING STATIONS, FOLDING BEAM WITH UP&DOWN FOLDING TECHNOLOGY, 1500/750/1500 MM SERVO BACK GAUGE WITH U SHAPE SUPPORT TABLE, SUCTION CUPS, FOOT PEDAL WITH 3 SWITCHES – 2 PCS FOR FRONT AND REAR USE, VERTICAL FRONT LIGHT BARRIERS, STANDARD TOOLS ...more
165" Erbend #MFA4225, 2021
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFA4225
Year: 2021
Make Erbend, Model MFA4225, Year of MFG 2020, Working Length 4200mm (13.75’), Capacity 12g, Upper Beam Stroke 135mm, Folding beam type Combi, Backgauge Depth U Shape, Closed Hem Capacity 20g, Electrics 3 phase, Opening height (without tools) 250 mm, Motor Power (Servo) 2 X 3,5 kW, Transmission system Ballscrew ...more
204" Jorns Acme-Gridley #JDB-200G, double folder, .125" max thickness, CP300 Control system, hydraulic cooling system, 2021
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Acme-Gridley
Model: JDB-200G
Year: 2021
Used 2021 Jorns JDB-200G Double Folder in Excellent Condition - Under power and available to be inspected, Max Thickness 0.125" Overall Length 17' CP300 Control System, Additional SSD Card for Controller, Standard Safety s, Geometry 'G', RH Hydraulic Material Thickness Adjustment, DP Dynamic Positioning, Pretension of ...more
251.9" Variobend #DB-6, double folder, 1.5mm capacity, 770mm upper beam stroke, 2008
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Variobend
Model: DB-6
Year: 2008
Spec, VARIOBEND DB-6.
252" Jorns #125-SM-CNC-400A-10, CNC 50, 2000
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: 125-SM-CNC-400A-10
Year: 2000
Year: 2000 Model# 125-SM-CNC-400A-10 Max. Material Width 21' Thickness Capacities: Mild Steel: 0.050" (1.25mm) Aluminum : 0.078" (2mm) Stainless Steel: 0.031" (0.80mm) Feeding Depth 39" (1,000mm) Max Bending Angle 140 degrees Opening Stroke (Max): 7.8" (200mm) Clamping Force: 30KN Upper Cheek Adjustment: Sheet ...more
252" Jorns, AG #Maxi-Line-150SW-SO-CNC500-6.4-HS, 16 gauge trim folder, AMS Pathfinder Control, 2006
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: MAXI-LINE-150SW-SO-CNC500-6.4-HS
Year: 2006
Brand JORNS AG Model MAXI-LINE-150SW-SO-CNC500-6.4-HS ID # 634097 Type Folding Machines Condition Used - Good Year 2006 Location Kentucky, United States Return Policy as-is Stock # LA, Jorns AG MAXI-Line 21' long, 16-gauge trim folder. Retrofitted in 2018 with AMS Pathfinder and Foldguard Control. Info subject to ...more
252" Jorns #Maxi-Multi-Line-200SW-RH-OV-SO CNC600, 14 gauge, AMS Pathfinder, 2009
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: MAXI-MULTI-LINE-200SW-RH-OV-SO
Year: 2009
252" Jorns Jorns #Norma-Line-150SW-RH-SO-CNC700-6.4HYS, 16 gauge folder, 2010
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: NORMA-LINE-150SW-RH-SO-CNC700-6.4HYS
Year: 2010
252" Jorns #Norma-Line-150SW-RH-SO-CNC700-6.4HYS, 16 gauge, 2010
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: NORMA-LINE-150SW-RH-SO-CNC700-6.4HYS
Year: 2010
252" Jorns Jorns #Norma-Line-150SW-RH-SO-CNC700-6.4HYS, 16 gauge, 2010
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: NORMA-LINE-150SW-RH-SO-CNC700-6.4HYS
Year: 2010
252" Jorns #Normaline-125-6.4M, 1998
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: NORMALINE-125-6.4M
Year: 1998
Make Jorns, Model Normaline 125 6.4M, Year of MFG 1998, Working Length 6400mm (21’), Capacity 18g, Upper Beam Stroke 200mm, Folding beam type single up, Backgauge Depth 1 meter, Mild steel capacity 18g, Stainless capacity 22g, Aluminum capacity 14g, Electrics 480v 3 phase, Weight 8,400 lbs, Cylindars 3, Slitter ...more
252" Jorns Norma AG Norma- line 1.25 new Beck S-2 control, 2000
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Year: 2000
252" Thalmann #TD150-6.4, double type folding beam, slitter, 2019
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Thalmann
Model: TD150 6.4
Year: 2019
Make Thalmann, Model TD150 6.4 M, Year of MFG 2019, Working Length 6.4 M (21’)), Capacity 16g (1.5mm), Folding beam type double, Slitter Yes, Includes many of the popular options, THALMANN CUTTER AUT. 1.5MM IRON, THALMANN ROUNDED LOWER BLADE, THALMANN AUTOMATIC INTRODUCTION TABLE, THALMANN AUTOMATIC TAPERED ...more
252" Thalmann #TZ 6.4m x 1.5mm Folder, DS3001 Controller, Tool Geometry 275° mach. clearance, 35° tilt angle 2017
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Thalmann
Model: TZ
Year: 2017
***CALL Louie at 847-627-6009 for more or a quote***.
252" Thalmann #TZ125-6.4M, CNC single folding machine, 18 gauge, 2017
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Thalmann
Model: TZ125-6.4M
Year: 2017
Brand – THALMANN, Model – TZ125-6.4M, Type – Folding Machines, Year – 2017, Condition – Used – Excellent, Max Thickness (gauge) 18 gauge, Overall Length 21′, Dimensions 77″ W x 280″ L x 71″ H, Weight 10,800.
252" Thalmann #TZ150, Prolink CNC Control, 2019
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Thalmann
Model: TZ150
Year: 2019
Make Thalmann, Model TZ150 6.4M, Year of MFG 2019, Working Length 6400mm (21’), Capacity 16g, Upper Beam Stroke 190mm (7.5”), Folding beam type single/up, Backgauge Depth 49”, Closed Hem Capacity 24g, Electrics 3 phase, Weight 5,400 kg (12,000 lbs), Length 280”, Depth 77 “, Height ...more
252" Thalmann #TZ150-6.4M, Beckhoff CNC Control 2024, slitter/roller shear, 2015
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Thalmann
Model: TZ150 6.4M
Year: 2015
Make Thalmann, Model TZ150 6.4M, Year of MFG 2015, Working Length 6400mm (21’), Capacity 16g, CNC Control Beckhoff (new in 2024), Slitter/Roller shear Yes, Mechanical Overhaul Yes, Hydraulics Overhaul Yes, New Controller installed in 2024 by Thalmann with Beckhoff Touchscreen.
252" Thalmann #TZ150-6.4M, folding beam type, single/up, 2019
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Thalmann
Model: TZ150 6.4M
Year: 2019
Make Thalmann, Model TZ150 6.4M, Year of MFG 2019, Working Length 6400mm (21’), Capacity 16g, Upper Beam Stroke 190mm (7.5”), Folding beam type single/up, Backgauge Depth 49”, Closed Hem Capacity 24g, Electrics 3 phase, Weight 5,400 kg (12,000 lbs), Length 280”, Depth 77 “, Height ...more
252" Thalmann #TZ150-6.4M, folding machine, 16 gauge, 49" small parts back gauge, 2017
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Thalmann
Model: TZ150-6.4M
Year: 2017
Used 2017 Thalmann TZ 150 6.4M 21' x 16 ga Folding Machine, Machine is in great condition and was seldomly used. Under power and available to be inspected., Max Thickness 0.0591" Max Thickness (gauge) 16 gauge Overall Length 20.99' Dimensions 280" x 77" x 71" 49" Small Parts Backgauge, Crowning and Radius Adjustment ...more
252" Thalmann #ZR-6.4-M 1.5mm capacity, DS CNC controller, 2015
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Thalmann
Model: ZR-6.4-M
Year: 2015
Make Thalmann, Model ZR 6.4 M 1.5, Year of MFG 2012, Working Length 21’, Capacity 16g, Slitter/shear Yes, CNC Control DS Controller.
312" Bradbury & Tishken, trim folder, 16 gauge, AMS Pathfinder CNC Control, 2013
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bradbury & Tishken
Year: 2013
312" Jorns Norma Line #125-SM-CNC2000-8, 18 gauge thickness, 2004
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: 125-SM-CNC2000-8
Year: 2004
312" Jorns Twinmatic 150SF-1300, Folding Machine 26.25' overall, 16 gauge, .0591" max thickness
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: 150SF-1300
Year: 2007
Max Thickness 0.0591″ Max Thickness (gauge) 16 gauge Overall Length 26.25′.
1020" RAS #Multibend-Center-79.22-2, 14 gauge thickness, 2003
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: MULTIBEND-CENTER-79.22-2
Year: 2003
Max Thickness 2 mm Max Thickness (gauge) 14 ga Overall Length 85 in Spec Sheet : Year 2003, Maximum working length 2160 mm, Maximum sheet thickness (steel 400 N/mm2) 2.0 mm, Maximum thickness of sheet metal (stainless steel) 1.5 mm, Maximum sheet metal thickness (aluminum) 3.0 mm, Maximum development sheet width 1500 ...more
Cidan #K25-40, 4050mm folding length, 2012
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cidan
Model: K25-40
Year: 2012
Folding Length mm 4050, Folding Capacity Steel* mm 2, Folding Capacity Stainless Steel** mm 1.2, Folding Capacity Aluminum*** mm 3, Opening Height – Clamping Beam mm 135, Outer Dimensions L x W x H mm 5180 x 1600 x 1700, Weight kg 4400, Motor – Clamping Beam kw 1.5, Motor – Folding Beam kw 2.2.
Erbend #MFB3220, folding machine, 2024
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFB3220
Year: 2024
Max Thickness 0.078 in Max Thickness (gauge) 14 ga Overall Length 10.49 ft Dimensions 98"/175"/74" Weight 10,500 lbs Control ERFOLD ADVANCED CNC Graphic Software on 15.6” Touch Screen control 90 mm segmented goats foot tools 10 & 25 mm sharp nose tools 2D Controller 1000 mm backguage with roller balls Spec ...more
Erbend #MFC, industrial folding machine, 6.3" clamping beam stroke w/vert movement
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: MFC
Spec, ERBEND MFC, The Erbend MFC industrial folding machine is a high-quality machine that supports commercial needs for metal fabrication. Any company that folds metal on a regular basis can benefit from this machine. Of course, this machine makes your daily operations significantly easier. As a result, the Erbend ...more
Fasti #FP40-32/4, CNC metal folder, Cybelec CFP 1200 CNC controller, 2006
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Fasti
Model: FP40-32/4
Year: 2006
Special s:, -Motorized crowning, -Motorized folding beam adjustment, -Motorized BMP adjustment, -Hydraulic tool clamping, -MAH 25 motorized backgauge, - L-shaped table extensions, - Working range 10 mm - 1600 mm (.393" – 63")/10 mm - 3200 mm (.393" – 126"), - Steel ball rollers for easy ...more
Forstner #ARG-MT300/125, CNC controller, 16 gauge, 6 motorized decoilers, 2002
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Forstner
Model: ARG-MT300/125
Year: 2002
Jorns #AG-Twinmatic-125-6.4 Folder
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: AG-TWINMATIC-125-6.4
Year: 2008
Jorns #3JDB125G DP, 2022
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: JDB 125G DP SLS1250
Year: 2022
2022 Jorns JDB125G DP SLS1250 in excellent shape, more to follow.
Jorns Acme-Gridley #Maxi-Line-150SW-SO-CNC500 6.4HS Folder
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: MAXI-LINE 150SW-SO-CNC500 6.4HS FOLDER
Year: 2005
2005 Jorns AG MAXI-Line 21' long, 16-gauge folder, 150SW-SO-CNC500 6.4HS, AMS Pathfinder CNC Controller, Dimensions: 292"L x 70”D x 77”H, Weight: 12,000 lbs, Fair appearance, working condition.
Jorns Acme-Gridley #Twin-Pro-150G-RO-UV-SL-1150-CP100-8-MP, 8m x 16 gauge double folder, 2015
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: TWIN-PRO-150G-RO-UV-SL-1150-CP100-8-MP
Year: 2015
2015 Jorns Twin Pro 8m by 16 Guage Double Folder with following s/options.Geometry G, Taper Gauge System, Hem Pretension, On Board Slitter, Multi Proportional Hydraulic System Upgrade.
Jorns #Twinmatic-150-SF-1300, double folder
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Jorns
Model: TWINMATIC-150-SF-1300
Year: 2006
Year: 2006, Retrofit Year: 2019-06, The machine was retrofitted in June 2019 and now s a state-of-the-art control system, including new s implemented during the retrofit., The control upgrade improves accuracy, speed, reliability and safety., Double bending technology, Clamps, Tables, Maximum stroke: 1300 mm, Working ...more
Legionnaire #1250, 1250mm working width, 1mm plate thickness, 2018
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Legionnaire
Model: 1250
Year: 2018
Legionnaire Slitting /Cut-to-Length Line, Control upgraded to touch screen., Manufacturer:Krasser GMBH, -Max. Working width: 1250 mm, -Max. plate thickness: steel 1 mm | alu 1,25 mm, -Number of knives: 5 pairs with 3 additional pairs, -SPS controlled (knife adjustment, straightening system, feed, etc.) Cross section ...more
Ras #Mini-Bend-Center-79.05, folding machine
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: MINI-BEND-CENTER-79.05
Year: 2014
Make RAS, Model 79.05 Mini Bend Center, Year of MFG 2014, Working Length 23.62” (600 mm) Blank length maximum, Working Width 23.62” (600 mm) Blank width maximum, Capacity 3mm, Upper Beam Stroke 5”, Electrics 3 phase, 400v 3 phase, CNC Control RAS Controller system, Included Options Intelligent Load ...more
Ras #MiniBend-Center-79.05
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: MINIBEND-CENTER-79.05
Year: 2014
Make: RAS, Model: MiniBend Center 79.05, Year: 2014, Tool Change: Fully Automatic, Tool Clamping: Air, Vacuum/Vacuum Gripper, Loading: Fully Automatic/Unloading takes place with an unloading belt, Kuka Robot with SICK Blank Scanner 600mm x 600mm, Note: upgrading scan to 800mm x 800mm, Max Sheet Thickness/Tool type V ...more
RAS #Turbobend-Plus-62.30, CNC folder, extended back gauge, System 5000 Controller
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: TURBOBEND-PLUS-62.30
Date of Manufacture: 1998, Sheet Thickness max. (Mild Steel): 2 mm / 14 ga., Working Length: 3200 mm / 125.9″, Back-gauge Depth (Standard): 6 – 1550 mm / 0.24″ – 61″, Back-gauge Accuracy: +/- 0.15 mm / +/- 0.006″, Upper Beam Open Height: max 200 mm / 7.87″, CNC Folding Beam ...more
Roper Whitney #AB1014K, 30° clamping beam, 61" back gauge, manual crowning adjustments, 2021
Category: CNC Folding Machines (Folders)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Roper Whitney
Model: AB1014K
Year: 2021
– 30° Clamping Beam, – 4” Kombi Box Tooling, – Manual Crowning Adjustments, – 61” Backgauge, – Spring Steel Backgauge Fingers, – 15” Touchscreen Monitor w/ Synergy Control, - L shaped backgauge (left side).
Amada #Ensis-3015AJ, Fiber laser cutter, 5' x 10', 2000 watt, AMNC Control, 2015
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: ENSIS-3015AJ
Year: 2015
5' × 10' (3015) AMADA fiber laser cutter 2 kW fiber laser source (ENSIS technology) Strong cut quality across materials — mild steel, stainless, aluminum ENSIS variable beam gives cleaner edges and less burr vs standard fiber AMADA AMNC control with good programming and nesting Built for job shop mixed ...more
Amada #Ensis-3015AJ Fiber laser, 2000 watt, 9 station ASFH3015E high speed pallet changer, 2016
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: ENSIS-3015AJ
Year: 2016
2016 Amada Ensis 3015 2kW Fiber Laser w/ 9 Station ASFH3015E High Speed Pallet Changer, Sheet-W 60" Sheet-L 120" Wattage 2 kw IPM 4724 ipm X 121" Y 61" Z 3.93" Weight 27,000 Control CNC (AMNC-3i) ASFH3015E - High Speed Pallet Changer (9 Stations), AMNC 3i Control, Amada Ensis 2000 - 2kW Resonator, Orion RKE3752A-VA-D ...more
Amada #Ensis-3015AJ/MPL-3015F1, load/unload, 5' x 10' 2000 watt fiber laser, 2015
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: ENSIS-3015AJ/MPL-3015F1
Year: 2015
Manufacturer: AMADA, LASER MODEL: ENSIS 3015AI, Automation Model: MPL 3015F1, Donaldson Dust Collector, Table Size 5’x10’, FIBER WATTAGE: ENSIS 2000W, Mfg Year: May 2015.
Bescutter #FLY-3015, fiber laser, 6000 watt, 5' x 10' sheet, shuttle table, air compressor, 2023
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bescutter
Model: FLY-3015
Year: 2023
2023 Bescutter Fly 3015 6kw Fiber Laser w/Shuttle Table and Air Compressor, Sheet-W 5' Sheet-L 10' Wattage 6000 w IPM 5512 ipm X 61" Y 120" Z 3.93" Dimensions 350"x 118" x 83" Weight 20945 lbs Control CNC (CypCut) Coractive CFLS-6000 Power Source, Gun Aiyou 53CFM Air Compressor, Chiller, Auto Exchanging Shuttle Table ...more
Bodor #P3015, laser cutter, 12000 watt, Bodor Thinker 3.0 CNC Control, 5' x 10' shuttle table, 2023
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bodor
Model: P3015
Year: 2023
2023 Bodor P3015 12kW, Working Area: 60″ x 120″, Sheet-W: 60″, Sheet-L: 120″, Z-axis Travel: 12.4″, Max linkage speed: 7874 ipm, Max. Acceleration: 4.0G, Positioning Accuracy: ±0.05 mm or +/- 0.0011968″, Repositioning Accuracy: ±0.02 mm or +/- 0.000787″, Maximum ...more
Bystronic #ByAutonom-3015, 4400 watt, Bytrans extended load/unload system, 2013
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bystronic
Model: BYAUTONOM-3015
Year: 2013
Spec, BYSTRONIC BYAUTONOM 3015.
Bystronic #BySpeed, fiber laser, 6000 watt, 5 x 10, with load/unload, used, 2014
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bystronic
Model: BYSPEED
Year: 2014
Sheet-W 60", Sheet-L 120", IPM 5500 ipm, X 120", Y 60", Z 2.75", Control CNC (BYSTRONIC BYVISION), Dimensions 398"L x 229"W x 114"H, Weight 26450 (LBS).
Bystronic #BySprint-4020, 4000 watt fiber laser, dust collector & chiller, 2013
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bystronic
Model: BYSPRINT-4020
Year: 2013
4020 BySprint 2013 4KW Fiber Laser, New head as of 2022 w/ refreshed fiber cable, Nozzle Changer (though we’ve never used it, it exists), High hours, started as a production machine but has since been used in custom fab for ~20 hours/week., Dust collector/Chiller as expected to go with the unit; dust collections ...more
Bystronic #ByStar-3015, 6000 watt fiber laser cutter, high precision & speed, 2016
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bystronic
Model: BYSTAR-3015
Year: 2016
2016 Bystronic 6kW Fiber Laser Cutter - Model 3015, This Bystronic 3015 is a 6kW fiber laser cutter offering superior precision, speed, and reliability. Perfect for industrial applications, it’s designed to handle large sheet sizes and heavy-duty materials. With a spacious cutting bed, dual shuttle tables, and ...more
Bystronic #ByStar-3015, fiber laser, 2017
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bystronic
Model: BYSTAR-3015
Year: 2017
Spec, BYSTRONIC BYSTAR 3015.
Bystronic #ByStar-Fiber-4020, 15000 watt laser with ByTrans extended automation, 80" x160" sheet, 2021
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bystronic
Model: BYSTAR-FIBER-4020
Year: 2021
2021 Bystronic 4020 ByStar Fiber 15kW Laser w/ByTrans Extended Automation, Sheet-W 80" Sheet-L 160" Wattage 15000 w IPM 5500 ipm X 160" Y 80" Z 3.9" Control CNC (ByVision Cutting), 2021 Bystronic ByStar 4020 15kw Fiber w/ByTrans Extended Automation, Length, approx. 559 in, Width, approx. 248 in, Height, approx. 126 ...more
Cincinnati #CL-440, 4000 watt Co2 laser, 5' x 10' dual pallet shuttel tables, chiller unit, 2017
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cincinnati
Model: CL-440
Year: 2017
- Cincinnati Controls, - 4000 Watt Co2 Laser Source, - 5' x 10' Dual Pallet Shuttle Tables, - Chiller Unit.
Cincinnati #CL-707, Co2 laser, linear magnetic drives, 4000 watt, 2008
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cincinnati
Model: CL-707
Year: 2008
Sheet-W 78.75 ", Sheet-L 157.5 ", Wattage 4000 w, IPM 8000 inpm, Control CNC (Cincinnati CNC Control), Maximum Sheet Size 2m X 4m 78 3/4" X 157.5", Sheet Configuration Dual Pallet, Laser Design Flying Optic, Maximum Positioning Speeds 8000 IPM, CONTROL S, Cincinnati CNC Controls, Windows NT Operating ...more
Ermaksan #Fibermak-GEN-3, 4000 watt 5' x10' fiber laser, Beckhoff CNC Control IPG Resonator, Precitec Auto Focus Cutting Head
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: FIBERMAK-GEN-3
Spec, ERMAKSAN FIBERMAK GEN-3 G-FORCE.
Ermaksan #Fibermak-GEN-3-4020, 4000 watt, 2016
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: FIBERMAK-GEN-3-4020
Year: 2016
Spec SheetYear 2016 Working Area 157"x78" Max Load 5511 lbs Machine Dimensions 489x223x91 Controller BECKHOFF LANTEK EXPERT CUT (1 Seat) Cutting Head Precitec ProCutter Drive System Linear Drive 4KW IPG YLS Resonator and Chiller Dust Collection Unit.
Ermaksan #Fibermak-Momentum-4020, 3000 watt Linear Driven Fiber Laser, Pre-Owned 2011
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: FIBERMAK-MOMENTUM-4020
Year: 2011
Spec, Sheet-W: 78.74″, Sheet-L: 157.48″, Wattage: 3000 w, X: 159″, Y: 81″, Z: 6″, Dimensions: L, W, H (489″ x 223″x91″), Weight: 40000, Control: CNC (Beckhoff (Upgraded in 2018)), Make Ermaksan Model FIBERMAK MOMENTUM Gen-2 Year of Mfg 2011 Wattage 3000 Hours 5,260 ...more
Ermaksan #Fibermak-Raptor-4020, 4000 watt IPG YLS, 2022
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Hamburg, NJ
Mfr: Ermaksan
Model: FIBERMAK-RAPTOR-4020
Year: 2022
6.56’ x 13.2 Dual-Pallet Tables $ INCL - 4.0kW IPG-YLS-U; Massachusetts, USA; (Modular, Field Serviceable 4.0kW Fiber Laser Resonator & Chiller): $ INCL - Precitec Pro Cutter (Auto-Focus Cutting Head) $ INCL - Beckhoff 1.5G (4,016 IPM) Servo Motors & Drives $ INCL - Beckhoff CNC Control, w/ Full Remote ...more
Ermaksan #Gen-3-3015, side load 4000 watt iber laser
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: GEN-3-3015
Year: 2017
BECKHOFF CONTROL, LANTEK NESTING, DUAL PALLET SIDE LOAD DESIGN, 5ft by 10ft, IPG YLS 4KW, IPG CHILLER, ERMAKSAN DUST COLLECTOR TORRIT STYLE, SAFETY BARRIERS, PRECITEC PRO CUTTING HEAD, 2.5G DRIVES (7000 IPM).
Ermaksan #Raptor, 5' x 10', 6000 watt fiber laser, 2020
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: RAPTOR
Year: 2020
- Table size: 5x10ft - Automatic pallet changer - Precitec Pro Cutter cutting head with Auto Focus - Beckhoff controller - IPG 6KW resonator (1” Mild – 5/8” Stainless – 1/2” Aluminum) - IPG chiller unit - Dust collector unit - Safety light curtain around the pallet changer - Scrap ...more
Han-Kwang #FS3015, fiber laser, 2500 watt, 60" x 120" sheet, Keller dust collector, chiller, shuttle table, 2019
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Han-Kwang
Model: FS3015
Year: 2019
2019 HK FS3015 2.5kw Fiber Laser, Sheet-W 60" Sheet-L 120" Wattage 2500 w IPM 4500 ipm Keller Dust Collector, Chiller, Shuttle Table Spec Sheet LASER POWER 2.5 KW, MAX. CUTTING SIZE 60" X 120", MAX. THICKNESS, AL.250", MS.630", SS.310, POSITIONING SPEED 4200 IPM, POSITIONING ACCURACY +/- 0.0039", FOCAL LENGTH 5.9" ...more
HSG #G3015X Pro m 20000 watt, Raycus 2G Dual Pallet Fiber Laser, 5' x 10', 2023
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hsg
Model: G3015X PRO 20KW
Year: 2023
2023 G3015XPRO-M 20KW RAYCUS Dual Pallet 2G Fiber Laser, RAYCUS 20kw, HSG Control, HSG Nesting, HSG P20 Cutting Head Auto Focus, 5’x10’ Dual Pallet Fiber Laser, Voltage Stabilizer and 480-380V Transformer, Dual Pallet, LOW HOURS:, TOTAL POWER ON TIME 3525, TOTAL LASER ON TIME 562.
HSG #G4020V 6G, 30000 watt Raycus fiber laser with store4020 6 shelf automation, new
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Addison, IL
Mfr: Hsg
Model: G4020V
Year: 2024
Main Configuration:, Laser Source: Raycus 30kW, Cutting Head: HSG, Control System: AlphaT Plus, Machine Bed: HSG, Standard Accessories:, Water Chiller, Dust Collector, Transformer & Voltage Stabilizer, OD6 Laser Protection Glass, Safety Light Curtains, Camera, Nesting Software, AC Room for Laser, Store4020-6 ...more
HSG #TP80S-PRO 6000 watt tube laser with bevel head, bundle load, 3m automatic height unloading, new stock 2023
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Addison, IL
Mfr: Hsg
Model: TP80SPRO 6KW +AL0380+AU09-A
Year: 2023
Spec, Sheet-L: 314.96″, Wattage: 6000 w, IPM: 5500 cmpm, X: 314.96″, Dimensions: 14000*4700*2600mm (with loading rack), Control: CNC (HSG-X Bus Control System), Max Tube Length: 314.96″ (26.25 ft), Max Single Tube Weight: 440 lbs, Rotating Speed of Chucks: 120 r/min, No-Load Speed: 140 m/min ...more
HSG #TS2, 6000 watt tube laser with bevel head, automation & handling, infeed bundle loader, new, 2025
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hsg
Model: TS2
Year: 2025
NEW 6kW HSG TS2 Tube Laser w/Bevel Head, Automation & Handling, Infeed Bundle Loader, Seam Detection and Unloading System, Wattage 6000 w Control CNC (HSG X) 6kw Raycus Fiber Power Source, HSG BEVEL Cutting Head, Infeed Bundle Loader, Seam Detection, Unloading System, HSG X Control System with Touchscreen ...more
HSG #TS2-90S, Fiber Tube Laser, 6000 watt, unused, 2025
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hsg
Model: TS2-90S
Year: 2025
Spec Sheet Technical Parameters, Tube processing range:, Round tube: φ20 - φ273, Square tube: □20*20 - □220*220, Rectangular tube: diagonal ≤254mm, Angle Steel: ≤8#(80x80mm), Channel: ≤8#(80x43mm), Optional claw:, Angle Steel: ≤18#(180x180mm), Channel: ≤20#(180x70mm), H Beam: ...more
Mazak #HyperTurbo-X510, 4000 watt, hybrid design, Mazatrol Preview CNC Control, 2007
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: HYPERTURBO-X510
Year: 2007
Year: 2007, Control: Mazak Mazatrol Preview CNC, Laser output: 4000 Watts, Resonator: Panasonic YB-L400A8M1, Machine design: Hybrid, Max. workpiece size: 120" x 60", X axis travel: 120.79”, Y axis travel: 60.8”, Z axis travel: 3.9”, Bed size: 5’ X 10’, Table height: 35.4”, Max. ...more
Mazak #HyperTurbo-X510, Co2 laser, good condition, 2007
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: HYPERTURBO-X510
Year: 2007
Spec, MAZAK HYPER TURBO X 510, Mazak Mazatrol Preview CNC Control Panasonic YB-L400A8M Resonator Non Contact Head Transformer Chiller Unit.
Mazak #Optiplex-3015-Fiber-II, 5' x 10', 4000 watt IPG fiber laser, 2016
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: OPTIPLEX-3015-FIBER-II
Year: 2016
Optiplex 3015 Fiber II 4KW IPG, Table Width: 5', Work Table Height: 35.43", Table Length: 10', Rapid Travel Speed (X,Y-Axis): 4,725 IPM, Max Wattage: 4,000, Positioning Accuracy (X,Y-Axis): 0.0002 inch/19.68 inch, X-Axis Travel: 122.5", Positioning Accuracy (Z-Axis): 0.0004 inch/3.94 inch, Y-Axis Travel: 62.2" ...more
Mazak #Optiplex-Nexus-3015, laser cutters, 3000 watt, Mazatrol Preview 3 Control, 2017
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: OPTIPLEX-NEXUS-3015
Year: 2017
Make: Mazak, Model: Optiplex Nexus 3015 Laser Cutters, Year of MFG: 2017, Working Table Height: 35.4”, Wattage: 3000 W, X 3000 mm, Y 1500 mm, X Axis travel is 118”, Y Axis Travel is 59”, Weight: 12850 kg / 28,400 lbs., Hours:, Laser Power ‘ON’ Time: 23,324 Hours, Cutting Hours: 3,962 ...more
Mazak #Optonics-Super-Turbo-X510 Mark-II 4000 watt, Maz L32B, 5' x10' tbl, 20000 hours, 2004
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: OPTONICS-SUPER-TURBO-X510
Year: 2004
Year: 2004, Axis Stroke X: 127.4", Y: 60.8", Z: 3.9", Control: Mazatrol L32b, Cutting Head: Non-Contact, Resonator: 4,000 Watt, Hours: ~22,500, Rapid Traverse: X/Y: 945 IPM, Z: 984 IPM, Max Cutting Feedrate: 945 IPM, Positioning Accuracy: +/-.0004", Repeatability: +/-.0002", Maz Workpiece ...more
Mazak #Optonics-Super-Turbo-X510-Mark-II, 5' x10', 4000 watt Co2 laser, Mazatrol L32b
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: OPTONICS-SUPER-TURBO-X510-MARK-II
Spec, MAZAK OPTONICS SUPER TURBO X-510 MARK II.
Mazak #Optonics-Super-Turbo-X510-Mark-II, 4000 watt, Mazatrol L32B, 5' x10' table
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: OPTONICS-SUPER-TURBO-X510-MARK-II
Sheet-W 5', Sheet-L 10', Wattage 4000 w, X 120", Y 60", Z 3.94", Weight 30580, Control CNC (Mazatrol L32B), SPEC SHEET, Make Mazak, Model STX 510 Mk2, Year 2001, Table Size 5'x10', Wattage 4000, Controller Mazatrol L32B, Voltage 230/460v, Hours 63,600.
Mazak #Space-Gear-48, 2000 watt Co2 laser cutter, 4' x 8' table, 2000
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: SPACE-GEAR-48
Year: 2000
Make/ Model Mazak Space Gear 48, Year of MFG 2000, Sheet-W 4 ', Sheet-L 8 ', Wattage 2000 w, X-Travel 109.3 ", Y-Travel 50 ", Z-Travel 14.6 ", A axis Stroke +/- 345 Degrees, B Axis Stroke +/- 135 Degrees, Weight 27,557 lbs, Control FANUC L-64, Max Load Capacity 860lbs, Voltage 3 Phase 230~460v, Max ...more
Mazak #Space-Gear-510-MKII, 2500 watt 6-Axis laser with load/unload, 2008
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: SPACE-GEAR-510-MKII
Year: 2008
Machine Model Space Gear 510 MKII 2500W, Year December 2008, CNC Control Mazak & Fanuc L64, Resonator 2.5kW, Laser Model CO2 YB-L250A 8M, Number Of Tables 1 (Hybrid Design), 6th Axis Rotary Tube Chuck Included, Automation Mazak Load Unload Included.
Mazak #STX48, C02 laser, 2500 watt, Mazak Mazatrol Preview CNC, nice condition, 2006
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: STX48
Year: 2006
year: 2006, Wattage: 2500, Maximum sheet size: 4' x 8', X-axis travel: 105", Y-axis travel: 50", Vertical stroke of head: 3.9", Weight approx. (lbs.): 27,600, Laser Model YB-L250A 8M 4E, Control: Mazak Mazatrol Preview CNC.
Mazak #Super-Turbo-X48, 2500 watt Co2 laser, 4' x 8' sheet, Mazatrol preview CNC, 2006
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: SUPER-TURBO-X48
Year: 2006
year: 2006, Wattage: 2500, Maximum sheet size: 4' x 8', X-axis travel: 105", Y-axis travel: 50", Vertical stroke of head: 3.9", Weight approx. (lbs.): 27,600, Laser Model YB-L250A 8M 4E, Control: Mazak Mazatrol Preview CNC.
Mazak #Super-Turbo-X48, CO2 Laser, 4' x 8', Good Condition, 2006
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: SUPER-TURBO-X48
Year: 2006
year: 2006, Wattage: 2500, Maximum sheet size: 4' x 8', X-axis travel: 105", Y-axis travel: 50", Vertical stroke of head: 3.9", Weight approx. (lbs.): 27,600, Laser Model YB-L250A 8M 4E, Control Mazatrol Preview.
Mazak #Super-Turbo-X48-Hi-Pro Super charged, 2000 watt, 104x50x3.9", 59800 hours, 1996
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: SUPER-TURBO-X48-HI-PRO
Year: 1996
Mazak #SuperTurbo-X510-MKII, 2500 watt laser, Mazatrol CNC, pallet table integration, Orion chiller, Mazak transformer, 2000
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mazak
Model: SUPER-TURBO-X510-MKII
Year: 2000
This 2000 Mazak SuperTurbo X510 MKII (2000) 2.5kW Co2 Laser is a fabricating BEAST with extremely low hours (75K) and IMMEDIATE availability! Call Mac-Tech's Nick Vanderlinde (262-899-5379) TODAY to schedule a demo - this machine won't be on the market long!, Mazak SuperTurbo X510 MKII (2000) 2.5kW Laser ...more
Mitsubishi #ML3015-LVP-S, laser, 4 kw, 5' x 10' table, 122" x 61" x 3.94" travel, 2005
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mitsubishi
Model: ML3015-LVP-S
Year: 2005
Listing Information, ID # 699237, Stock # LA, Brand MITSUBISHI, Model ML3015 LVP(S), Type Laser Cutters, Control CNC, Year 2005, Condition Used - Good, Return Policy as-is, Location Wisconsin, United States, Used 2005 Mitsubishi ML3015LVP(S) w/ML40CFX 4kw CO2 Laser - Under Power and Available to be inspected, Sheet-W ...more
Mitsubishi #ML3015eX-F80, 8000 watt fiber laser, 5 x10, 2020
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mitsubishi
Model: ML3015EX-F80
Year: 2020
Mitsubishi ML3015eX-F80 8kw 5' x 10' Fiber Laser, 2020, Excellent condition, 408" x 88" x 115", Mitsubishi M800 19" Controller, Dust Collector, Chiller, Dual Pallet.
Mitsubishi #ML3015EX-Plus Co2, laser cutter, Mitsubishi ML45CF-R 4500 watt resonator, 2016
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mitsubishi
Model: ML3015EX-PLUS
Year: 2016
Brand MITSUBISHI Model ML-3015 EX PLUS CO2 ID # 638436 Type Laser Cutters Condition Used - Good Year 2016 Location Wisconsin, United States Return Policy as-is Stock # LA, 2016 Mitsubishi ML3015eX Plus with Mitsubishi ML45CF-R 4.5kW Resonator, Sheet-W 60" Sheet-L 120" Wattage 4500 w IPM 5550 ipm X 122" Y 61" Z 5.9" ...more
Mitsubishi #ML3015EX-Plus Co2, laser cutter, Mitsubishi ML45CF-R 4500 watt resonator, 2017
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mitsubishi
Model: ML3015EX-PLUS
Year: 2017
Brand MITSUBISHI Model ML-3015 EX PLUS CO2 ID # 638437 Type Laser Cutters Year 2017 Location Wisconsin, United States Return Policy as-is Stock # LA, 2017 Mitsubishi ML3015eX Plus with ML45CF-R 4.5kW Resonator, Sheet-W 60" Sheet-L 120" Wattage 4500 w IPM 5550 ipm X 122" Y 61" Z 5.9" Dimensions 418.5″ L x ...more
Mitsubishi #ML3015EX-S, 2014
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mitsubishi
Model: ML3015EX-S
Year: 2014
Control Mitsubishi 700 Series CNC Display Unit 15” TFT Color LCD Touch Screen Laser Type CO2 Laser Output Power 4500 Watts Resonator Model ML45CF-R Machine Structure X,Y Axis Precision Rack & Pinion Machine Structure Z Axis Linear Travel Drive Method X,Y,Z Sim. 3 Axes Control Method X,Y, & Z Sim.3 Axis ...more
Prima #Domino-1530, 5-Axis Co2 laser cutter, 4000 watt, 5' x 10', 2002
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Prima
Model: DOMINO-1530
Year: 2002
Spec Sheet, SPINDLE SPEED 12,000 RPM, MAX SWING (INCHES) 17.32", BAR STOCK CAPACITY 2.0", PALLET SIZE (INCHES) 25", TABLE SIZE - L 61", TABLE SIZE - W 30", THROAT DEPTH 9.45", TOOL CHANGER TYPE 60 ATC, CHUCK SIZE (INCHES) 8", X - AXIS TRAVEL (INCHES) 15.7" / 400MM, Y - AXIS TRAVEL ...more
Trumpf #TruLaser-5030, 8000 watt laser, 5' x 10', with chiller, dust collector, 2017
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Trumpf
Model: TRULASER-5030
Year: 2017
2017 Trumpf TruLaser 5030 8kw 5x10, Includes: Chiller, Dust Collector, Dual Pallet Shuttle Tables & Solid State TruDisk 8001, 30.3' x 20.2' x 7.2, 25,800 lbs, Very good condition, available and under power for inspection.
Trumpf #TruMatic-L3030, 5' x10' Co2 laser with Lift Master, 4000 watt, 2005
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Trumpf
Model: TRUMATIC-L3030
Year: 2005
Resonator Wattage 4000 Watt, Maximum Sheet Size 5' x 10', Maximum Workpiece Weight 1962 lbs, X-Axis Travel 122.2", Y-Axis Travel 62.2", Z-Axis Travel 4.5", Rapid Traverse Rate 3300 IPM, Weight (Approx.) 28,000 lbs, Notes:, Currently has 72,159 hours, Laser resonator replaced at 38,444 hours, Total ...more
Whitney #PLATELASER-1530, laser, w/ IPG Ytterbium power source, 5' x 10' table, 6 kw, Siemens cnc, 2018
Category: CNC Lasers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Whitney
Model: PLATELASER-1530
Year: 2018
Listing Information, ID # 699232, Stock # LA, Brand WHITNEY, Model PLATELASER 1530, Type Laser Cutters, Control CNC (SIEMENS), Year 2018, Condition Not Specified, Return Policy as-is, Location Wisconsin, United States, Used 2018 Whitney PlateLaser 1530 w/IPG Ytterbium 6kw Power Source, Sheet-W 5', Sheet-L 10', Wattage ...more
DMG, Mori #NZX-2500/600L, 30.7" swing, very nice condition, low hours, 2014
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Dmg
Model: NZX-2500/600L
Year: 2014
Spec, DMG MORI NZX 2500/600L.
CNC Machine Controls
1 Result
Control panel, 5-Axis ful contour bevel head, Hypertherm XPR300 plasma system, Hypertherm Edge Connect controller, Machitech Industrial enclosure
Category: CNC Machine Controls
Seller: Machine Tool Technologies
Location: Milwaukee, WI
5-Axis Full Contour Bevel Head, Hypertherm XPR300 Plasma System, The new XPR300™ represents the most significant advance in mechanized plasma cutting technology, ever. It advances HyDefinition® cut quality by blending new technology with refined processes for next generation, X-Definition™ cutting on ...more
Salvagnini #P4X-2516, panel bender, 98.42" bending length, 2009
Category: CNC Panel Benders
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Salvagnini
Model: P4X-2516
Year: 2009
Used 2009 Salvagnini P4X-2516, Salvagnini CNC Control, Feeding Conveyor & Table, Rotate in Place Table, Bending Blades/Blank Holder/Feeding Trolley, Tilt Unloading Unit, Air Cooled Liquid Chiller, Hydraulic Unit, Siemens Electrical Controls, Automatic Sheet Loading/Unloading Device, Automatic Change Tool System ...more
CNC Plasma Cutting Systems (Flame Cutters)
11 Results
Dynatorch #XLY 5' x10 Plasma, Thermal Dynamics UltraCut 100, iCNC XT2 Automation Process Control, down draft table, 2015
Seller: Machine Tool Technologies
Location: Denver, CO
Mfr: Dynatorch
Model: XLY HF 5X10
Year: 2015
XLY HF 5x10 – High Frequency System Includes: Brushless Yaskawa Servo Drive Motors Automatic Integrated Arc Voltage Torch Height Control Helical Planetary Gearboxes XLY Air Handler 5x10 – Downdraft Air Handler Includes: Powder Coated Finish Advanced Multi-Chamber Design Clean Out Door Pull-Out Clean Out ...more
Koike Aronson #HPR-260XD, 3G-IV2525, 8' x 25' table, 2017
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Koike
Model: HPR-260XD
Year: 2017
Stationary Control Stand with Emergency Stop, CNC Controller Hypertherm Edge Connect, Downdraft Table with Slag Pans stored Underneath, Individual removable Slats, 1/8-Inch-Thick Slats are 3-Inches apart of Center, Table is designed for 2-Inch-Thick Plate, Hypertherm EDGE CONNECT s:, Windows®10 Embedded2 USB 2.0 ...more
Koike Aronson #PM2525
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Koike
Model: PM2525
8'x25' Downdraft Cutting Table Dual Side Servo Drives Hypertherm Edge Pro Control Hypertherm HPR 260XD power supply, Hypertherm torch height control recently replaced Leads, Servos Motors, Amplifier, and slats.
Lincoln Electric #Python-X2, plasma cutting structural fabrication system, Hypertherm HPR400XD plasma, 2017
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lincoln
Model: PYTHON-X2
Year: 2017
Used 2017 Lincoln Python X2 Plasma Cutting Structural Fabrication System - Under power and available to be inspected, Control CNC (Python X CNC With Touch Screen) Hypertherm HPR400XD Plasma, 60′ Infeed Tables, 40′ Outfeed Tables, Spec Sheet Max Profile Width 36", Minimum Profile Width 4", Max Profile ...more
Linde #PROSTAR-8x20-XPR-300, plasma table, 2022
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Linde
Model: PROSTAR 8020 XPR300VWI
Year: 2022
2022 LINDE PROSTAR 8x20 XPR300 with VWI Hi Def Plasma Table, 1 Oxy Fuel Head, LOW HOURS (1/4 Shift).
Messer Metal Master Cell #MMCEL, 6' x 25' dual automatic shuttle, Hypertherm XPR170 X-Definition plasma system, 2020
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Messer
Model: MMCEL
Year: 2020
c, Dual Automatic Shutle (6’ x 25’ each), Beckhoff Control with Camera Location System, Pnuematic Marking System, Slagger Scrap Removal, 2020 GSG Camfil Messer Dust Collector (2600 CFM) (GOLD SERIES), Sick Barrier Safety.
Messer #SM/HD1006P, 6' x 20' HyperTherm Powermax 85 amp
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Messer
Model: SM/HD1006P
Cut-Width 6 ', Cut-Length 20 ', Plasma Power 85 a, # Plasma Torches 1, Cutting Speed 400 inch/min, Dimensions 176" x 366", Control Burny Phantom 2, Total Length and Width: 176" x 366", X & Y Servo Motors (new 2019), Manual torch height adjustment (auto up down while cutting), Max speed ...more
Ocean #Liberator Oxy Fuel Beam coping machine, 2015
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ocean
Model: LIBERATOR
Year: 2015
Spec, Dimensions: Approx 124″(l) X 96″(w) X 132″(h), Weight: 5,200 Lbs, Control: CNC (Siemens 840Di CNC Controller), Maximum Opening Width Between Material Clamps: 50″, Minimum Closed Width Between Material Clamps: 0.13″, Maximum Opening Height: 28″, Minimum Material Length: ...more
Prodevco #PCR42, robotic plasma beam coping, Fanuc M-20iA, Hypertherm XPR260XD, 2014
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Prodevco
Model: PCR42
Year: 2014
The PCR42 robotic plasma cutting machine does beam coping, notches, holes and weld preps, splits beams, and scribes plus marks on all four faces of H-beams, channels, angles, HSS and plates., S, Prodevco PCR42 Robotic Plasma Cutting Solution, The PCR42 advanced robotic plasma steel cutting system combines CNC plasma ...more
Prodevco Industries #PCR42, robotic plasma beam coping machine, 2018
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Prodevco
Model: PCR42
Year: 2018
Spec, Dimensions: 6500 lbs, Weight: 12′ x 12′ x 11′, H-Beam Minimum: 4″ × 4″, H-Beam Maximum: 40″ × 16″, Channel Minimum: 3″ × 1.25″, Channel Maximum: 40″ × 16″, Angle Minimum: 2″ × 2″, Angle Maximum: 8″ ...more
Victory #V610WU, CNC plasma systems, 6' x 10', Hypertherm X-Definition, XPR300, VWI, EDGE Connect TC, 2021
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Victory
Model: V610WU
Year: 2021
Used 2021 Victory V610WU 6'x10' CNC Plasma Unitized System, Hypertherm X-Definition, XPR300, VWI, EDGE Connect TC, True Hole MFG, Cut-Width 6' Cut-Length 10' Plasma Power 300 a # Plasma Torches 1 • Model V610WU, Cut Bed supports 100lbsf (actual system foot print 8'x14'), Cutting Area is 12" Wider & 12" Longer ...more
CNC Power Squaring Shears (Gauge)
1 Result
.393" x 10' Swing Beam Shear - CNC Hydraulic CSS 1090,10 mm/.393" x 3200 mm/10', 220/440v, 3 Phase, 60 Hz, 2007
Category: CNC Power Squaring Shears (Gauge)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Year: 2007
CNC Power Squaring Shears (Inch)
2 Results
1/4" x 10' Ermaksan #HGD-B3100-6, power squaring shear
Category: CNC Power Squaring Shears (Inch)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: HGD-B3100-6
Cutting Length 120", Cutting Capacity (60,000 psi) 1/4”, Cutting Capacity (90,000 psi) 3/16”, Cutting Angle 1.5 Degrees, NO Throat Depth, Stroke 8.3”, Strokes / Minute 16, Hold Downs 14, Pressure 12 Tons, Main Motor 15 HP, Back gauge Motor 1 HP, Oil Capacity 40 Gallons, Blade Gap ...more
1/4" x 12' Summit shear, powered back gauge, nice condition
Category: CNC Power Squaring Shears (Inch)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Summit
SPEC SHEET, CAPACITY, MILD STEEL -. 12' X 1/4", CAPACITY, STAINLESS STEEL. 12' X.166", STROKES PER MINUTE. 18 TO 26, THROAT DEPTH. 12", MAIN DRIVE MOTOR & CONTROLS. 15 HP, PRESENT ELECTRICAL ARRANGEMENT. 220/440/3/60, FRONT OPERATED POWER BACK GAUGE. 32", HOLD DOWNS. HYDRAULIC, FOOT PEDAL. ...more
38.5 Ton, Amada #RG-35S, 3-Axis hydraulic press brake, NC9-EX11 Control, 4.1'OA, 40.2" between housing, 1995
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: RG-35S
Year: 1995
Brand AMADA Model RG-35S ID # 630613 Type Press Brakes Condition Used - Fair Year 1995 Location Illinois, United States Return Policy as-is Stock # LA, Tonnage Capacity: 38 Tons, Overall Bed Length: 49.3", Table Length: 47.3", Distance Between Housings: 40.2", Throat Depth: 7.88", Open Height: 14.58", Stroke Length: ...more
40 Ton, MVD #ibend-A-1250-40, Delem 58T Control, 4' overall, 2-Axis back gauge, low hours, 2018
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mvd
Model: IBEND-A-1250-40
Year: 2018
MODEL: MVD IBEND A 40 1250 4 Axis *Y1, Y2, X, R) 2 Axis Back Gauge: x, r Delem 58T Control 4ft by 44 Ton LOW HOURS LOW STROKES, MFG YEAR 2018, Tonnage 39.916 t Type HYD Overall Length 1,250 mm Between Housings 1,100 mm Stroke 260 mm # Axis 4 Dimensions 2750L, 1950W, 2400H, Weight 3050kg Control CNC (Delem 58T).
44 Ton, Ermaksan #Micro-Bend, 3.3'OA length, AKAS safety, Cybelec Cybtouch 12, X-Axis CNC Back Gauge
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: MICRO-BEND
Spec, ERMAKSAN MICRO-BEND.
45 Ton, Primeline #2103-40, hydraulic, 6.6' overall, 61.02" between housing, 2-Axis, Elgo P8822 Control, 2004
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Primeline
Model: 2103-40
Year: 2004
The Primeline 2103-40 CNC Press Brake stands out for its durability and robust construction, making it a reliable asset in any fabrication shop. Designed with precision and power in mind, this press brake integrates advanced hydraulic systems and CNC control to deliver superior bending performance. Its reputation for ...more
55 Ton, Safan Darley #E-Brake-B50-2050, electric press brake, 10' overall, 81" between housing, 11.8" stroke, 2015
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Darley
Model: E-BRAKE-B50-2050
Year: 2015
Brand SAFAN DARLEY Model E-BRAKE B 50-2050 ID # 631491 Type Press Brakes Condition Used - Excellent Year 2015 Location Wisconsin, United States Return Policy as-is Stock # LA, Tonnage 55 T Type ELE Overall Length 119.3" Between Housings 81" Stroke 11.81" Dimensions 120" L x 70" W x 117" H Weight 10472 lb Control CNC ...more
55 Ton, Dener #DDM-5020, 4-Axis, 100% electric servo press brake, 6.8'OA, 11.8" stroke, ESA S 675 controller, 2022
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Dener
Model: DDM-5020
Year: 2022
DENER DDM 5020 SERVO Press Brake: MODEL DD-M-5020 : 6.8’ by 55 US Ton ESA S 675 Controller 4 Axis Back Guage (X, R, Z1, Z2) Ram Approach & Bending Movement Powered by (2) Servo Motors, Belts, Pulleys Ram Return, Spring Activated (Ram Goes Up in Failure) O-Frame Design offers full length bending & gauging ...more
60 Ton, Toyokoki #APB-5620WU, 6-Axis, 6.6'OA, 60" between housing, 3.94" stroke
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Toyokoki
Model: APB-5620WU
Year: 2009
Tonnage 60 T Type ELE Overall Length 78.74" Between Housings 5' Stroke 3.94" # Axis 6 Control CNC (Toyokoki).
66 Ton, Ermaksan #Power-Bend-Falcon-1270-60, Knee Seater, Delem 58T Control, 4-Axis (Y1, Y2, X, R), AKAS, 2022
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: POWER BEND FALCON KNEE SEATER 1270-60
Year: 2022
- ERMAK POWER-BEND PRO SEATER 1270-60 (66 Ton x 50”), - DELEM DA-58T Touch Screen Control, o Delem Profile T Offline Included, - 4 Axis (Y1, Y2, X, R), - Heidenhain® Linear Scales:, o +/- 0.0002” Resolution; +/- 0.0004” Repeatability, - Standard Tooling Package:, o Promecam-Style Quick Release ...more
66 Ton, Ermaksan #Power-Bend-Falcon-2100-60, 6.8' OA, 4-Axis, Delem 53T Control, new
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: POWER-BEND-FALCON-2100-60
Year: 2025
Delem 53 Touch Screen Control AKAS Point of Operation Laser Safety CNC Crowning 4 Axis (Y1, Y2, X, R) Y1, Y2 Controled by + -.0004" Heidenhain Linear Scales Back Gauge (31.5" X, 9.8" R) Manual Front Support Arms on linear ways LED front and rear lighting Precision Tooling Package (Rolleri 0813-011-11 85 Degree Goose ...more
72 Ton, Ermaksan #Green-Press-FX-Servo-6521, 8-Axis, 6.1' overall, 93" between housing, 11.8" stroke, 2020
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: GREEN-PRESS-FX-SERVO-6521
Year: 2020
Spec, Tonnage: 72 T, Type: ELE, Overall Length: 83″, Between Housings: 93″, Stroke: 11.8″, # Axis: 8, Dimensions: 152″ x 91″x114″, Weight: 12430 lbs, Control: CNC (Delem 66T), Brand – ERMAKSAN, Model – GREEN PRESS FX SERVO 6521, Type – Press Brakes Year – ...more
100 Ton, Amada #HFE100-3S, 10' overall, 106" between housing, 2003
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: HFE100-3S
Year: 2003
2003 Amada HEF 100-3S, 10' BED, 107" BETWEEN HOUSINGS, 7.8" STROKE, 16.5" THROAT DEPTH, 4 AXIS BACK GAGE (VERIFY SPEC), OPERATEUR CNC CONTROL, CNC CROWNING, 18.5" CLOSED HEIGHT, APPROACH 472 IPM, PRESSING 47 IPM, RETURN 472 IPM, 130" LR X 61" FB X 106" T APROX DIMENSIONS, 15,250 APROX WEIGHT.
110 Ton, Amada #HG-1003ARS, hydraulic press brake, AMNC 3i CNC Control, 6-Axis, 10.2'OA, 106.3" between housing, 2017
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: HG-1003ARS
Year: 2017
Brand AMADA Model HG 1003 ARS ID # 643021 Type Press Brakes Condition Used - Excellent Year 2017 Location Wisconsin, United States Return Policy as-is Stock # LA, 2017 Amada HG1003ARS Automatic Robotic Bending System with ATC, Tonnage 110 T Type HYD Overall Length 122.44" Between Housings 106.3" Stroke 9.8" # Axis 6 ...more
110 Ton, Bystronic #XPERT-100X3100, Press Brake, 10' overall, 110" between housing, 8.5" stroke
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bystronic
Model: XPERT-100X3100
Year: 2008
Capacity: 110 Ton, Overall Length of Bed: 10' Control:, Bystronic CNC Distance Between Housings: 110", Stroke: 8.5", Throat Depth: 15.75", Open Height: 19.7", X-Axis Backgauge Max Range: 41.3", X-Axis Travel: 23.6", X-Axis Speed: 19.7, IPS R-Axis Travel: 9.8", R-Axis Speed: 5.9 IPS, Z-Axis Speed: 39.3 IPS, Z-Axis ...more
110 Ton, Ermaksan #2600X100, 8' overall, ER90 Plus control, XR back gauge, 2014
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: 2600X100
Year: 2014
Tonnage 110 US Tons, Bending Length 102.36 Inches, Distance Between Housings 86.61 Inches, Stroke 10.8 Inches, Daylight (Open Height) 21.7 Inches, Throat Depth 16.1 Inches, Table Height 35.4 Inches, Table Width 3.54 Inches, Approach Speed 378 IPM, Bending Speed 28.2 IPM, Return Speed 448.8 IPM, Back Gauge Travel (X ...more
110 Ton, Ermaksan #Power-Bend-Falcon-2600-100, 8.5' OA, ER70 Control, X, R Back Gauge, CNC crowning
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: POWER-BEND-FALCON-2600-100
Tonnage 110, Bending Length 102.36, Distance Between Housings 86.61, Crowning Motorized, Stroke 10.8, Daylight (Open Height) 20.86, Throat Depth 16.14, Table Height 35.43, Table Width 3.54, Approach Speed 472.45, Bending Speed 22.44, Return Speed 366.14, Back Gauge Travel (X Axis) 31.5, Back Gauge Travel (R Axis) ...more
125 Ton, Toyokoki #HYB-125, 6-Axis, 10' overall, 96" between housing, 7.87" stroke, 2009
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Toyokoki
Model: HYB-125
Year: 2009
Tonnage 125 T Type HYD Overall Length 10' Between Housings 8' Stroke 7.87" # Axis 6 Weight 16000 Control CNC (Hybrid Servo).
130 Ton, Ermak #CNC-AP-132-10', XR Back Gauge, Delem DA 66w control, Lazersafe Safety
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermak
Model: CNC-AP-132-10'
MFG Date: 2005, Tonnage: 130 US Tons, Bed Length: 122", Distance Between Housings: 100", Stroke: 8.26", Throat Depth: 15", Approach Speed: 472 IPM, Bending Speed: 31.4 IPM, Return Speed: 496 IPM, Crowning Manual, X Axis Travel 31", Speed of X Axis 1181, R Axis Travel 9.8", Speed of R Axis ...more
135 Ton, LVD #150-JS-10, press brake, 10' overall, 100" between housing, Hurco Autobend 5c Control, X-Axis Back Gauge
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lvd
Model: 150-JS-10
Tonnage.135 ton, OVERALL LENGTH OF BED. 120", DISTANCE BETWEEN HOUSING. 100", STROKE. 5.12", OPEN HEIGHT. 12.5", CLOSED HEIGHT. 7.1", RAM ADJUSTMENT. 4.3", DEPTH OF THROAT. 7.8", FLOOR TO TOP OF BED. 36", WIDTH OF BED. 7", RAM SPEED APPROACH. 236 IPM, RAM SPEED PRESSING. 22 IPM, RAM ...more
149 Ton, Ermaksan #Power-Bend-Pro-3100-135, 10.1' overall, CNC crowning, Delem ER70 Controller, laser safety
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: POWER-BEND-PRO-3100-135
Tonnage 149 US Tons, Bending Length 122 Inches, Distance Between Housings 102.4 Inches, Stroke 10.8 Inches, Daylight (Open Height) 21.7 Inches, Throat Depth 16.1 Inches, Table Height 35.4 Inches, Table Width 3.54 Inches, Approach Speed 472 in/minute, Bending Speed 23.4 in/minute, Return Speed 283.2 in/minute, Back ...more
150 Ton, Ermaksan #Power-Bend-Pro-3100-135, 3-Axis hydraulic press brake, 10' overall
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: POWER-BEND-PRO-3100-135
Year: 2010
Spec SheetTonnage 150 US Tons, Bending Length 122 Inches, Distance Between Housings 102 Inches, Stroke 10.8 Inches Daylight, (Open Height) 21.7 Inches, Throat Depth 16.1 Inches, Table Height 35.4 Inches, Table Width 3.54 Inches, Approach Speed 472 in/minute, Bending Speed 22.2 in/minute, Return Speed 366 in/minute ...more
150 Ton, Ermaksan #Speed-Bend-Pro-3100-135, 10.1' overall, 102.4" between housing, 10.8" stroke, 16.1" throat, 3D CNC Control
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: SPEED-BEND-PRO-3100-135
Year: 2012
Ermak CNC SPEEDBEND 3100-135, Ermak Speed Bend Pro 3100-135 Press Brake, 10.17’ bending length, 149 US Tons capacity TASK 84 ER90 3D Controller 4-Axis (Y1, Y2, X, R) with.0004” precision (Heidenhain linear encoders) CNC Motorized Crowning Back Gauge: 31.5” X-Axis Ballscrew, 9.8” R-Axis (Manual ...more
150 Ton Strippet LVD #PPED-150, CNC press brake
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Strippet
Model: PPED-150
Year: 2007
165 Ton, Safan Darley #E-Brake-150-3100, electric press brake, 10.2'OA, 122.05" between housing, 11.8" stroke, 2016
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Darley
Model: E-BRAKE-150-3100
Year: 2016
Brand SAFAN DARLEY Model E-BRAKE 150-3100 ID # 631487 Type Press Brakes Condition Used - Excellent Year 2016 Location Wisconsin, United States Return Policy as-is Stock # LA, Tonnage 165 T Type ELE Overall Length 122.05" Between Housings 122.05" Stroke 11.81" Dimensions 171” X 122” x 114” Weight ...more
170 Ton, HSG #HC1703, press brakes, 10.5' overall, 106.3" between housing, 7.9" stroke, Delem DA69S, 8 axis, unused, 2025
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hsg
Model: HC1703
Year: 2025
Brand – HSG, Model – HC1703, Type – Press Brakes, Year – 2025, Condition – New In-Stock, Tonnage 170 T, Type HYD, Overall Length 10.5′, Between Housings 8.85′, Stroke 7.87″, # Axis 8, Dimensions 173″ L x 67″ W x 96.5″ H, Weight 23,500 lbs, Control CNC ...more
170 Ton, Salvagnini #Syncro-B2-170/2500, 8.2'OA, 4-Axis back gauge, 2010
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Salvagnini
Model: SYNCRO-B2-170/2500
Year: 2010
Spec, SALVAGNINI SYNCRO B2 170/2500.
175 Ton, Wysong #MTH-175-144, brake, 12' overall, Hurco Autobend 7, X-Axis CNC Back Gauge, 1995
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Wysong
Model: MTH-175-144
Year: 1995
Tonnage 175 T, Type HYD, OA Length 12 ', OA (Overall) Length 12 ', Between Housings 126 ", Stroke 8 ", # Axis 2, Dimensions 153" x 60" x 106.5, Weight 25800 (LBS), Control CNC (Hurco Autobend 7), CAPACITY 175 TONS, OVERALL LENGTH OF BED & RAM 144", DISTANCE BETWEEN HOUSINGS 126" ...more
192 Ton, Ermaksan #Power-Bend-Falcon-3100x175, CNC pres brake, 10.3'OA, 102.4" between housing, 10.8" stroke, 16.1" throat, 21.7" DL, Delem DA-58T, 2016
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: POWER-BEND-FALCON-3100X175
Year: 2016
Used 2016 Ermaksan Power Bend Falcon 3100-175, Delem DA-58T Control, CNC Crowning, Laser Safe Curtains, Spec Sheet Tonnage: 193 US tons (175 metric tons), Bending Length: 10 ft (3100 mm), Axes: 4-axis synchronized CNC (Y1, Y2, X, R), Throat Depth: 16.1 in (410 mm), Distance Between Uprights: 8.5 ft (102.4 in / 2600 ...more
193 Ton, Ermaksan #Power-Bend-Falcon-3760-175, Delem 58T 4 Axis, CNC crowning, 10.8"stroke
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: PBF 3760-175
Year: 2023
Ermak PowerBend FALCON 3760-175 (12.3’ by 193 US Tons), - NEW UPGRADED DELEM 58T CNC Graphical Touch Screen Control, - 4 - Axis (Y1, Y2, X, R), o Syncronization of Y1 + Y2 Axis provide.0004” Tollerances, with linear encoders., o X + R CNC Back Gauge (Manual Z1, Z2, Adjustment), o 31.5” X-Axis ...more
220 Tons, Bystronic #Beyeler-PR-200-IPC
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bystronic
Model: BEYELER-PR-200-IPC
Year: 2005
220 Ton, Durma #CNC-HAP-37200, 12' overall, CNC Crowning, 2004
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Durma
Model: CNC-HAP-37200
Year: 2004
# Axis 7, Dimensions 193" x 89" x 114", Weight 30,000 Lbs, Control CNC (Delem CNC Control), Model: DURMA CNC-HAP 37200, MFG Date: 2004, Tonnage: 220 US Tons, Bed Length: 144", Distance Between Housings: 122", Stroke: 8.26", Throat Depth: 15", Approach Speed: 235 IPM, Bending Speed: ...more
220 Ton, Hurco #PR200-4300, 14' overall length, 5-Axis back gauge
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hurco
Model: PR200-4300
Tonnage 220 T, Type HYD, OA Length 14 ', Weight 34000 lbs, 5 Axis Back Gauge.
230 Ton, Cincinnati #230AFx10FT, Press Brake, 10' overall, 10" stroke, Autoform Control
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cincinnati
Model: 230AFX10FT
Cincinnati 230 AF-10' Press Brake, - 230 Ton, - 10 Ft, - 10 Inch Stroke, - Cincinnati Autoform Control.
242 Ton, Ermak #Power-Bend-Falcon-3760-220, 4-Axis hydraulic press brake, 12.3'OA, 2019
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermak
Model: POWER-BEND-FALCON-3760-220
Year: 2019
Spec, ERMAKSAN POWERBEND FALCON 3760-220.
242 Ton, Ermaksan Power Bend Falcon #3760-220, 12' overall, X & R Back Gauge, ER90 Plus, crown, 2017
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: 3760-220
Year: 2017
Spec, Tonnage: 242 T, Type: HYD, Overall Length: 12.33′, Between Housings: 10.6′, Stroke: 10.83″, # Axis: 4, Dimensions: 200 x 89 x 114, Weight: 27,783, Control: CNC (ER 90 Plus), Tonnage: 242 US Tons, Bending Length (A): 148″, Distance Between Housings (B): 128″, Stroke (C): 10.8″ ...more
242 Ton, Ermaksan #Speed-Bend-7320X220 TON, 6-Axis, 24' overall, 240" between housing, Delem 66 touch controller
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: SPEED-BEND-7320X220
Bending Length 288.2", Max Power 242 US Tons, Free Down Speed 210 inches per minute, Bending Speed 24 inches per minute, Return Speed 204 inches per minute, Stroke 10.8", Back gauge stroke 31.5" (X Axis), Back gauge stroke 9.8" (R Axis), Distance between housings 240", Crowning Motorized, Throat ...more
242 Ton, Ermaksan #Speed-Bend-Pro-3760-220, 6-Axis hydraulic press brake, 12.3' overall, 2021
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: SPEED-BEND-PRO-3760-220
Year: 2021
Ermak CNC SpeedBend 3760-220 (12.34’ x 242 Ton)Delem 66 T 2D/3D Graphical ControlDelem Profile T Lignt Offline SoftwareRemote Diagnsostics Ability6-Axis (Y1, Y2, X, R, Z1, Z2) Press BrakeSynchronization of Y1 + Y2 Axis provide.0004” Tolerances with linear encoders.X, R, Z1, Z2 CNC Back Gauge31.5” ...more
245 Ton, Durma #ADR-30220, 10' overall, DT10 controller, XR back gauge, AKAS safety
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Durma
Model: ADR-30220
Make Durma, Model ADR, Year of MFG 2016, Bending Length 120", Between Columns 102", Y Rapid 282 Inch/min, Y Working Speed 24 Inch/min, Y Return Speed 236 Inch/min, Daylight 21", Table Width 4", Table Height 35", Stroke 10", Throat Depth 16", Motor Power 30hp, Length 167", Width ...more
250 Ton, Accurpress #725012, 12' overall length, Comp-U-Bend 61000 control, 1999
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: 725012
Year: 1999
Tonnage 250 T, Type HYD, Year 1999, OA Length 12 ', Between Housings 124 ", Stroke 8 ", # Axis 1, Dimensions 178" x 64" x 100", Weight 26,000, Control CNC (ETS 100), Back Gauge X Axis CNC, Manual R, Comp-U-Bend 61000 Controller.
250 Ton, Accurpress #Advantage-725012, hydraulic press brake, 12' overall, 124" between housing, 8" stroke, 2007
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: ADVANTAGE-725012
Year: 2007
Make: ACCURPRESS, Model: Advantage 725012 250 Ton Hydraulic Press Brake, Max Tonnage: 250, Overall Length: 12, Stroke: 8", Open Height: 16", Bed Height: 36", Bed Width: 6", Distance Between Side Frames: 124", Approach Speed: 65 IPM, Bend Speed: 21 IPM, Max Return Speed: 140 IPM, ETS 3000 CNC Control, Auto Crowning ...more
250 Ton, Accurpress #Advantage-725012, ETS3000, ETS foot console, ram tilt, CNC X Axis Back Gauge, manual R, 2005
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: ADVANTAGE-725012
Year: 2005
Make Accurpress, Model 725012, Year of MFG 2005, Maximum Tonnage 250 Tons, Maximum Bending Length 12’, Distance Between Side Frames 124", Maximum Stroke Length 8", Open Height 16", Throat Depth 10", Closed height 8", Back Gauge X Axis CNC Backgauge, Manual R, Overall dimensions (l x w x ...more
280 Ton, Piranha #280-13P, cnc press brake, 13.4' overall, 141.5" between housing, 17.7" open, 25 HP, 8.5" stroke, Delem DA-66T Control, 2017
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Piranha
Model: 280-13P
Year: 2017
Listing Information, ID # 699235, Stock # LA, Brand PIRANHA, Model 280-13P, Type Press Brakes, Control CNC (Delem DA-66T), Year 2017, Condition Used - Good, Return Policy as-is, Location Wisconsin, United States, Used 2017 Piranha 280-13P CNC Press Brake, Tonnage 280 T, Type HYD, Overall Length 161.4", Between ...more
286 Ton, Ermaksan #EVO3-4270-260, Servo hybird 7-Axis press brake, 14' overall, 2020
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: EVO3-4270-260
Year: 2020
550 Ton, Ermaksan #Power-Bend-Falcon-4270-500, hydraulic press brake, Delem DA-58T CNC Control, 4-Axis, 14' overall, 132" between housing, 2019
Category: CNC Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: POWER-BEND-FALCON-4270-500
Year: 2019
Brand ERMAKSAN Model POWER-BEND FALCON 4270-500 ID # 643141 Type Press Brakes Condition Used - Excellent Year 2019 Location Wisconsin, United States Return Policy as-is Stock # LA, 2019 Ermaksan Power Bend Falcon 4270-500 (14' x 550 Ton Brake), Tonnage 550 T Type HYD Overall Length 14' Between Housings 11.81' Stroke ...more
CNC Punch / Plasma Cutters
1 Result
40 Ton, Whitney #3400RTC-60, Hypertherm Plasma, Fanuc control punch plasma
Category: CNC Punch / Plasma Cutters
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Whitney
Model: 3400RTC-60
Capacity 40 Ton, Max. Sheet Size 100″ x 60″ w/o Repositioning, Max Positioning Area, X Axis 100″, Y Axis 60″, Max. Sheet Thickness 1/2″ Punch & Plasma, Max. Work Piece Weight 650 Lbs., Max. Hole Diameter, 1/4″ Material 5″, 1/2″ Material 1″, Max. Hit Rate ...more
CNC Turret Punch Press Machine
3 Results
20 Ton, Trumpf #TruPunch-3000, turret punch, 20 stations, 50" throat, 59" x 118" sheet, 2011
Category: CNC Turret Punch Press Machine
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Trumpf
Model: TRUPUNCH 3000
Year: 2011
2011 Trumpf TruLaser 3000 Turret Punch, Good Condition, Capacity: 20 Ton, Sheet Width: 59", Sheet Length: 118", Turret Stations: 20, Throat Depth : 50", Max Sheet Thickness: 1/4", Punching: 900 IPM, Max Stroke Rate Marking: 2500 SPM, 20.6' L, 21.5' D, 7.2' H, Approx. 26,000 lbs, Trumpf CNC Controller, MultiTool ...more
30 Ton, Yawei #HPE-3058, Servo CNC turret punch press, 40 station 2 automatic index
Category: CNC Turret Punch Press Machine
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Yawei
Model: HPE-3058
- 30 ton punching force, - LUSTSP servo punching system (Germany), - 1500 x 2500mm axis travel, - 102m/min axis travel rate (X and Y), - 400hpm punch frequency (25.4mm pitch and 6mm stroke), - 1500 x 5000mm maximum sheet size (with one repositioning), - 6.35mm maximum sheet thickness, - 40 station turret with 2 auto ...more
Voortman #V500, CNC punching & shearing system for flat steel
Category: CNC Turret Punch Press Machine
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Voortman
Model: V500
Year: 2006
, VACAM V500 CONTROL W/ 15" TOUCH SCREEN, IN FEED DRAG-CHAIN CROSS TRANSPORT WITH MECHANICAL DRAG-DOGS, IN FEED SYSTEM (VAK 6000), FLAT STEEL WITH 20' LENGTH & FEEDER TRUCK W/ MATERIAL CLAMPING, VNI 1/3 INTEGRATED HYDRAULIC NUMBERING UNIT, AUTOMATIC IN FEED SYSTEM FOR FLAT STEEL (20' OVERALL LENGTH, 21" ...more
Coordinate Measuring Machines (CMM)
1 Result
Leitz, Hexagon #Micra-040503, coordinate measuring machine, 16.7" X, 19.7" Y, 11.8" Z, probe rack, fixture rack, 2008
Category: Coordinate Measuring Machines (CMM)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Leitz
Model: MICRA-040503
Year: 2008
Brand LEITZ/HEXAGON Model MICRA 040503 ID # 633811 Type Coordinate Measuring Machines Condition Used - Good Year 2008 Location Wisconsin, United States Return Policy as-is Stock # LA, Spec Sheet X Axis Measuring Range: 15.7" (400mm), Y Axis Measuring Range: 19.7" (500mm), Z Axis Measuring Range: 11.8" (300mm) ...more
49.2" x .039" Forstner #RM-6-1250, Cut-To-Length line, 2013
Category: Cut-to-length Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Forstner
Model: RM-6-1250
Year: 2013
In Great Condition Under power and ready to demo Year: 2013 Cutting Width: 1250 mm Material Thickness 0.4 to max 1mm.
288" x 1.25" Braner, Cut-To-Length line, 2008
Category: Cut-to-length Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Braner
Year: 2008
Make Braner, Model 2412, Year of MFG 2008, Working width 24”, Capacity 18g, Coil Capacity Capacity 8000 lbs, Electrics 3 phase, Inner Diamter 20”.
Forstner #KA6 1250 MFA-100 CR MC, Cut-To-Length line, Siemans Si-matic, 1250mm length, 1.5mm capacity, 3KW, 2008
Category: Cut-to-length Lines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Forstner
Model: KA6
Year: 2008
Lissmac #SBM-M1500-B2-60 Oxide removal machine, great condition, low hours, 2011
Category: Deburring Machines
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lissmac
Model: SBM-M1500-B2-60
Year: 2011
Mfg Year: 2011, Material Throughput Automatic, Aperture Width 59.055", Sheet Thickness Max 0.787", Drive Power Brushing Motor 4x6.4 kw, Motor Speed 1715 rpm, Voltage 440-480 v/60hz, Power consumption Brushing Motor 4x9.2 A, Power Consumption Feed Motor 0.7 A, Noise level 79.5 dB(a), Protection Class IP 54 ...more
Dust Collectors
1 Result
2500 cfm Ermaksan dust collector, nice condition
Category: Dust Collectors
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Spec Sheet, Suction Unit, -The Ermaksan Dust Collector provides a healthy working environment by absorbing the fumes and small particle formed during cutting. This machine runs automatically when cutting is started., - The laser cutting head activates the suction eye over which it is located. Thus, a much higher level ...more
Guillotine Shears
2 Results
Erbend #EMS3220, shear, 2024
Category: Guillotine Shears
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: EMS3220
Year: 2024
CUTTING LENGTH 3200mm/10.5’, CUT PER MINUTE 35, MOTOR POWER 4 KW, MILD STEEL 2 (14g) mm, STAINLESS 1.2 (18g) mm, ALUMINIUM 3 mm, DIMENSIONS (W X L X H) 1950 x 3750 x 1600 mm, 77” x 147” x 63”, WEIGHT 2010Kg 4,431 lbs, • 1000 MM SERVO MOTORIZED BACK GAUGE SYSTEM, • TOUCH-SCREEN NC ...more
Ermaksan #HVR4100-06, pre-owned hydraulic guillotine shear, 2023
Category: Guillotine Shears
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: HVR4100-06
Year: 2023
Make Ermaksan, Model HVR 4100-06 Hydraulic Guillotine Shear, Year of MFG 2023, DImensions: 86.61” x 195.28” x 91.34”ONE, Capacity: ¼”, Motor Power: 15 HP, Voltage: 460 V, DImensions: 86.61” x 195.28” x 91.34”N, • Hardened Blades, • Portable foot pedal eligible ...more
Horizontal and Vertical Milling Machine
1 Result
Bridgeport #6-X005, 1-1/2 HP
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Bridgeport
Model: 6-X005
Bridgeport 6-X005 Milling Machine, 1 1/2 HP, 120v.
Horizontal Band Saws
10 Results
13" x 18" Hyd-Mech #S20-Series-2, horizontal band saw, 3 HP vari-speed motor, 1999
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: S20-SERIES-2
Year: 1999
HYD-MECH S-20 SERIES 2 HORIZONTAL BAND SAW, Make: Hyd-Mech, Model: S-20 Series 2, Year: 1999, Swivel Mitering 45°, Coolant System, Variable Speed 3HP Motor, 13" X 18" Cutting Capacity, 12" @45°, 16" Blade Wheel, 5,000 lb. Max Load, Weight: 1800 lbs., Low Run TIme (Hours), Purchased new in early 2000, Sits in ...more
13" x 18" Hyd-Mech #S20A, horizontal automatic band saw, 178" x 1" blade, swing head mitering, 2009
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: S20A
Year: 2009
2009 HydMech S-20A Horizontal Bandsaw, Rect-Cap (H) 13" Rect-Cap (W) 18" Rounds-Cap 13" Square-Cap 11" Power 3 hp Type (Auto, Manual, Semi) Auto Blade Width 1" Blade Length 178" Weight 3,800 lbs Swing-head mitering, Automatic shuttle feed, Hydraulic vises, 1" blade, Coolant Spec Sheet CAPACITY, Rectangular: 90° - ...more
13" x 18" Hyd-Mech #S20A-Series-II, horizontal band saw, 75-400 SFM, 2003
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: S20A-SERIES-II
Year: 2003
CAPACITY, RECTANGLE: 13″ X 18″, ROUND: 13″ DIAMETER, 45 DEGREES ROUND: 12″ DIAMETER, 45 DEGREES SQUARE: 11″ X 11″, BLADE, LENGTH: 13′ 6″, WIDTH: 1″, THICKNESS:.035″, BLADE SPEED: 75 – 400 SFM, BLADE GUIDES: CARBIDE, BLADE WHEEL DIAMETER: 16″ ...more
16" x 22" HEM #Cyclone-A-4, horizontal band saw, CNC controller, automatic feed
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hem
Model: CYCLONE-A-4
Easy View Console-All Function Control, 18" Exit Support, Adjustable Main & Feed Vise, Adjustable Clamping Force, 2 Hold Down Fixtures, Verticle Alignment Bar Speed w/ LED Readout, Carbide Blade Guides, Computer Controlled Feed System, Cut Watcher System, Adjustable Cutting Force & Feed Rate, Manual Blade ...more
16" x 25" Hyd-Mech #M-16A, miters from 90 to 60, 7.5 HP motors. 1-1/4" blade, 33" single stroke, New
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: M-16A
20" x 30" Hyd-Mech #M-20A, band saw, PLC 500 control, 90 to 60 miters, 1-1/2" blade, 10 HP VFD, New
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: M-20A
22" x 22" Hyd-Mech #H-22A, horizontal band saw, 22' 6" x 2" blade, 40-300 SFM
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: H-22A
Capacity 90 degrees 22″ x 22″ Capacity Round 22″ Blade Size 2” x 22’ 6” Blade Speed 40-300 SFM Automatic Indexing.
49" x 10" BTM #TP1256.30 Advanced Technology band saw, 21' 7" x 1-1/4" blade, 3 HP, 65-350 SFM, 2019
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Btm
Model: TP125.30
Year: 2019
Make: BTM, Model: TP125.30, Year of MFG: 2019, Technical Data, Blade Dimensions: 21’ 7” x 1 ¼”, Rectangular Capacity: 49” x 10” (LxH) 90°, Working Height: 36”, Blade Motor Power: 3 HP (2.2 Kw), Hydraulic Pump Motor Power: 1 HP (.75 Kw), Blade Speed: 65-350 SFM, Fast ...more
Amada #Marvel-800-PCS3, band saw, Siemens Simatic HMI PC3 CNC Control, 2020
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: MARVEL-800-PCS3
Year: 2020
2020 AMADA MARVEL BANDSAW 800 PCS3, Blade Length: 7620mm / 25 ft., Blade Width: 51mm / 2.07 in, Blade Thickness: 1.5mm /.083 in, Weight: 12,0000 lbs., CNC Control: Siemens Simatic HMI PC3, 60 Degree Dual Miter, 60ft In/Out Powered Conveyers, 4 Vertical Rollers on In-Feed, Laser Cutting Line, Chip Conveyor, 72” ...more
RMT #S-Smart-PM-13-15, horizontal band saw
Category: Horizontal Band Saws
Seller: Machine Tool Technologies
Location: MILWAUKEE, WI
Mfr: Rmt
Model: S-SMART-PM-13-15
Year: 2022
Horizontal CNC Machining Centers
1 Result
Daewoo Doosan #DHM-800, CNC horizontal machining center, Fanuc 16iMA, 49.2" X, 39.4" Y, 39.4" Z, 12000 RPM, 120 automatic tool changer, 2002
Category: Horizontal CNC Machining Centers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Daewoo Doosan
Model: DHM-800
Year: 2002
Heavy-duty CNC horizontal machining center built for serious industrial milling and multi-axis operations — often used in automotive, aerospace, heavy equipment, and precision manufacturing environments. CNC horizontal machining center Work Travels: ~49.2″ X × 39.4″ Y × 39.4″ Z ...more
60 Ton, Accurpress #7606, brake press, 6' overall, 52" between housing, 8" stroke, 10 HP, 1990
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: -7606
Year: 1990
Spec, ACCURPRESS 7606.
60 Ton, Accurpress #7606, 8" stroke, 52" between housing, 6' overall, 1990
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: -7606
Year: 1990
Weight: ~6,000 lbs Dimensions: 84″Lx40″Wx70″H Capacity: 60 Ton x 72″ Distance Between Housing: 52″ Ram Stroke: 8″ Open Height: 14″ Closed Height: 6″ Throat Depth: 8″ Speeds: 130 IPM (Fast)/251 IPM (Slow) Motor HP: 10 Electrical: 230V/3PH, Capacity: 60 T x 72″ ...more
80 Ton, Amada #RG8024, press brake, 8.2' OA, 80.7" between housing, 3.94" stroke, 15.75" throat, 1999
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: RG8024
Year: 1999
Make: Amada, Model: RG-8024, Year of MFG:1999, Capacity: 80 Ton x 8’, Table Length: 94.5”, Max Bending Length: 98.6”, Distance Between Uprights: 80.7”, Throat Depth: 15.75”, Length of Stroke: 3.94”, Open Height: 14.57”, Overall Length: 101.8”, Overall Width: 58.9” ...more
94 Ton, Mitsubishi #Diamond-BH8525, hybrid press brake, 8.6'OA, 87" between housing, 9.84" stroke, 2018
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mitsubishi
Model: DIAMOND-BH8525
Year: 2018
Used 2018 Mitsubishi Diamond BH8525 Hybrid Press Brake, Tonnage 94 T Overall Length 102" Between Housings 87" Stroke 9.84" Weight 15,400 lbs Movable Foot Switch, Dual Telescoping Back Gauge Fingers "FF Axis", DIAMONDBEND Brake Offline Programming Software, Dual Drive Mechanism, Crowning System, Automatic Thickness ...more
149 Ton, Ermaksan #Power-Bend-Falcon-Pro-3100-135, 3-Axis hydraulic press brake, 10.2' OA, 102.4" between housing
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: POWER-BEND-FALCON-PRO-3100-135
Make: Ermaksan, Model: Power-Bend Falcon Pro 3100-135 3 Axis Hydraulic Press Brake, Bending Length: 122”, Maximum Power: 149 Tons, Maximum Bending Capacity: 0.24”, Distance Between Housing: 102.4”, Table Height: 35.4”, Throat Depth: 16.1”, Height: 16.9”, Back Gauge Stroke: ...more
175 Ton, Accurpress #717510 Advantage, hydraulic press brake, 10' overall, 100" between housing, 2003
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: 717510
Year: 2003
Brand ACCURPRESS Model ADVANTAGE 717510 ID # 638449 Type Press Brakes Condition Used - Good Year 2003 Location Wisconsin, United States Return Policy as-is Stock # LA, 2003 Accurpress 717510, Tonnage 175 T Type HYD Overall Length 10' Between Housings 100" Stroke 8" # Axis 5 Dimensions 178″ x 66″ x ...more
175 Ton, Krras #APB160.3700, hydraulic press brake, 2-Axis, 10.2' OA, 102" between housing, 7" stroke, 2007
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Krras
Model: APB160.3700
Year: 2007
180 Ton, AFM FabTek #EP13-180, press brake, 156" overall, 126" between housing, 6 axis, Cybelec ModEva Control, 1998
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Afm
Model: EP13-180
Year: 1998
AFM FABTEK EP13-180 Press Brakes, Listing Information, ID # 699236, Stock # LA, Brand AFM FABTEK, Model EP13-180, Type Press Brakes, Control CNC (Cybelec ModEva 19T), Year 1998, Condition Not Specified, Return Policy as-is, Location Wisconsin, United States, Used 1998 AFM Fabtek EP13-180 Hydraulic Press Brake ...more
193 Ton, Ermak #PowerBend-Falcon-3760-175, 4-Axis hydraulic press brake, 12.4' OA, 128" between housing, 2017
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermak
Model: POWERBEND-FALCON-3760-175
Year: 2017
Tonnage: 192.0 Tons, Type: Hyd, Overall Length: 148.0 Inches, Between Housings: 128.0 Inches, Stroke: 10.8 Inches, # Axis: 4.0, CNC Control: Delem 58T 4-Axis CNC Control, Weight: 20,947 lbs., NEW DELEM 58T 2D Graphical Touch Screen Controller Upgrade:, DA-58T s:, 2D Graphical Touch Screen Programming, 15" High ...more
193 Ton, Ermak #Speed-Bend-3760-175, press brake, 6-Axis, 12.3'OA, 128" between housing, Delem DA69 Touch CNC 3D CAD Control, 2023
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermak
Model: SPEED-BEND-3760-175
Year: 2023
Tonnage 193 T Type HYD Overall Length 12.34' Between Housings 128" Stroke 10.8" # Axis 6 Dimensions 193x85x110 Weight 25000 Control CNC (DELEM 69T) Wilson Express Rail 1000 W/T Z2 Upper Hydraulic Clamp and Wilson Hydraulic Pump American Die Riser Full Length CNC Crowning - ERMAK SPEED-BEND 3760-175 (193 Tons x ...more
250 Ton, Accurpress #725012, hydraulic press brake, 12' overall, 124" between housing, 8" stroke, 1996
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: 725012
Year: 1996
ACCURPRESS 725012 250 Ton 12' Hydraulic Press Brake, Maximum Tonnage: 250 Tons, Maximum Bending Length: 12', Distance Between SIde Hems: 124", Maximum Stroke Length: 8", Throat Depth: 10", Closed Height: 8", Back Gauge: X Axis CNC Backgauge, Overall Dimensions: 178" x 64" x 100", Weight Approx.: 30,000 lbs. ...more
250 Ton, Accurpress #725012, hydraulic press brake, 12' overall, ETS 3000 Control, CNC X-Axis Back Gauge, 1999
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Accurpress
Model: 725012
Year: 1999
440 Ton, Ermak #Speed-Bend-4270-3620, 6-Axis, 14' overall, 2023
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermak
Model: SPEED-BEND-4270-3620
Year: 2023
ERMAKSAN SPEED-BEND 4270-400 STANDARD S:, ERMAK SPEED-BEND 4270-400 (440 Tons x 14’, 6-Axis), Delem 66TOUCH 2D Programming / 3D Graphical Visualization, • Profile T ‘Lite’ Offline Software Included, 6 - Axis (Y1, Y2, X, R, Z1, Z2), CNC Motorized Wedge Crowning, Anti-Deflection, LazerSafe PCSS; ...more
440 Ton, Ermaksan #Speed-Bend-4270-3620, 6-Axis, 14' overall, 2023
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: SPEED-BEND-4270-3620
Year: 2023
ERMAKSAN SPEED-BEND 4270-400 STANDARD S:, ERMAK SPEED-BEND 4270-400 (440 Tons x 14’, 6-Axis), Delem 66TOUCH 2D Programming / 3D Graphical Visualization, • Profile T ‘Lite’ Offline Software Included, 6 - Axis (Y1, Y2, X, R, Z1, Z2), CNC Motorized Wedge Crowning, Anti-Deflection, LazerSafe PCSS; ...more
500 Ton, Pacific #K500-12, hydraulic press brake, 12' overall, 120" between housing, 12" stroke, 40 HP
Category: Hydraulic Press Brakes
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Pacific
Model: K500-12
Tonnage 500 T Type HYD Overall Length 12' Between Housings 10' Stroke 12" Dimensions 144"WX86"DX127"Tall Weight 60,500 Lbs Spec Sheet Capacity: 500 Tons, Overall Length of Bed & Ram: 12’, Stroke: 12”, Throat Depth: 11”, Open Height: 22”, Shut Height: 10”, Bed Width: 10”, Main ...more
300 Ton, Sutherland #HD-300-84-48, hydraulic press, Allen Bradley Panelview 1000 Control, 30" stroke, 48" daylight, 2001
Category: Hydraulic Presses
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Sutherland
Model: HD-300-84-48
Year: 2001
Used 2001 Sutherland HD-300-84-48 Under power and available for inspection Video available upon request, Tonnage 300 T Stroke 30" Daylight 48" Power 100 hp Bed L 122" Bed W 59" IPM 15 ipm Weight 78300 Alan Bradley PanelView 1000 Control Spec Sheet CAPACITY:, Capacity (forming tonnage): 300 tons, Capacity (optional ...more
IGM, Modularc RP-400-1, robotic plasma, used, good condition, 2010
Category: Industrial Robots
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Igm
Model: MODULARC RP-400-1
Year: 2010
- Robotic Plasma Cutter w/ Round Tube Chuck, - Teachable controller, - Complete enclosed cell, - Thermal Dynamics Ultra-Cut 100 w/ automatic gas control, 1.5" to 24" round tube capacity, This is a custom application. Used for cutting holes in the ends of tubes. Machine is under power. Ready for demonstration. Subject ...more
Lincoln, Python-X, structural steel 6-Axis CNC robotic cutting system, 2019
Category: Industrial Robots
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lincoln
Model: PYTHON-X
Year: 2019
2019 LINCOLN Python X Structural Steel 6-Axis CNC Robotic Cutting System, • 6-Axis CNC Robot, • Hypertherm HPR 400XD - Clean Power Supply, • True Hole Technologies, • 45’ Infeed Conveyer, • 45′ Outfeed Conveyer, • 4-Strand Lugged Cross Feed Infeed & Outfeed Transfer Decks ...more
Lincoln, Python-X2, Python X CNC with touch screen, bevel, layout marking, 2342 hours, 2015
Category: Industrial Robots
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lincoln
Model: PYTHON-X2
Year: 2015
Max Profile Width 36", Minimum Profile Width 4", Max Profile Height 18", Minimum Profile Height 4", Layout Marking Yes, Control Python X CNC With Touch Screen, Bevel Yes, Out-Feed Conveyors 60', Out-Feed Transfers 40', Machine Hours 2342.
Prodevco #PCR42, 30' in/outfeed, 400 amp Hypertherm plasma, round tube processing option
Category: Industrial Robots
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Prodevco
Model: PCR42
SPEC SHEET, Prodevco PCR42 Advanced Robotic Steel Plasma Cutting Machine, Major Components, 6 axis robot, FANUC ARC Mate 120iC/10L with hollow wrist, Retractable in-feed conveyor, Retractable out-feed conveyor, Non-contact linear encoder, Part measuring with 3D vision sensor, Hypertherm HPR 400amp Plasma, Electrical ...more
Initial and Double Pinch Plate Bending Rolls
2 Results
5' x .134" Lemas #TR-120/5, plate bending rolls, 3-rolls, 4.72" roll diameter, 16 FPM, 2022
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lemas
Model: TR-120/5
Year: 2022
2022 Lemas TR120/5 in excellent condition. Under power and available for inspection., Length of Rolls 5' Max Thickness 0.134" Max Thickness (gauge) 10 gauge # Rolls 3 Roll Diameter 4.72" Dimensions 101″ x 36″ x 44″ Weight 3120 lbs Spec Sheet Rolling Capacity: 5′ x 10 Ga. (Typical Mild Steel ...more
6' x 5/16" Cole-Tuve, Sahinler #4R-HS-20-190, 4-roll double pinch type hydraulic plate bending roll, 2020
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cole-Tuve
Model: 4R-HS-20-190
Year: 2020
Brand SAHINLER Model 4R HS 20-190 ID # 638444 Type Plate Bending Rolls including Pinch Condition Used - Excellent Year 2020 Location Wisconsin, United States Return Policy as-is Stock # LA, 2020 Cole-Tuve Sahinler 4R HS 20-190 4-Roll Double Pinch Type Hydraulic Plate Bending Roll 6' x 5/16" Mild Steel Capacity, Length ...more
5" x 5" x .5" Piranha #P90, ironworker, 90 ton, 10 HP, 10" throat, 4.875" stroke, die included
Category: Ironworkers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Piranha
Model: P90
Used Piranha P-90 available for sale. Under power and available for inspection. Videos available upon request., Angle (L1) 5" Angle (L2) 5" Angle (T) 0.5" Tonnage 90 T Power 10 hp Throat 10" Stroke 4.875" Dimensions 35" x 90" x 66-1/2" Weight 6000 lbs 25 gallon hydraulic reservoir, 15 H.P. Main motor, Dies Included ...more
Scotchman #FI-85/140FI-8507-14M, 85 ton, 7" throat, angle shear, flat bar shear station, 1995
Category: Ironworkers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Scotchman
Model: FI-85/140FI-8507-14M
Year: 1995
SCOTCHMAN FI-8507-14M, Year: 1995, Model FI-85 / 140 FI-8507-14M Serial Number 4071-M195, PUNCHING CAPACITY:, Nominal Tonnage 85, Punch Diameter thru thickness 1-1/16" thru 1", Depth of Throat 7", ANGLE SHEAR:, Angle at 90 deg 6" x 6", Angle at 45 deg 4" x 4", FLAT BAR SHEAR STATION: 14" length, Capacity 1" x 12" ...more
Prodevco Industries #PCR42, Robotic Beam Plasma, Hypertherm XPR300, 2017
Category: Plasma Cutters/Punches
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Prodevco
Model: PCR42
Year: 2017
Spec, Operating System: Prodevco Operating System (PRODEVCO OS), File Compatibility: Direct DSTV file import without macros or file conversion, Drawing Visualization: Direct viewing of drawings on the PCR control panel, CAD Integration: Automatic conversion of CAD drawings into robot cutting trajectories, Process Time ...more
Messer #PLATE-MASTER-II, plasma, w/ hypertherm power source, 8' x 30' table, 400A, 2020
Category: Plasma Cutters/Punches
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Model: PLATE-MASTER-II
Year: 2020
Listing Information, ID # 699231, Stock # LA, Brand MESSER, Model PLATE MASTER II, Type Plasma Cutters, Control CNC, Year 2020, Condition Used - Excellent, Return Policy as-is, Location Wisconsin, United States, Used 2020 Messer PlateMaster II w/Hypertherm Hyperformance HPR400XD Power Source, Cut-Width 8', Cut-Length ...more
Power Squaring Shears (Gauge)
6 Results
14 gauge x 10.1' Roper Whitney #10M14, mechanical shear, 24" BG, 35 SPM
Category: Power Squaring Shears (Gauge)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Roper Whitney
Model: 10M14
Year: 2007
The Roper Whitney 10M14 Mechanical Sheet Metal Shear is designed for efficient and precise sheet metal cutting. Here are its key :, Maximum Cutting Length: 121.25 inches Material Capacity: 14-gauge mild steel 18-gauge stainless steel Strokes per Minute: 35 Back Gauge Range: 24 inches Hold-Down System: Solid bar with ...more
14 gauge x 10.2' RAS #52.31, shear, 34 SPM, 4 HP
Category: Power Squaring Shears (Gauge)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ras
Model: 52.31
Cut Length. 122.0474", Maximum Plate Thickness at 58000 PSI.0787", Cutting Angle.9 Degrees, Strokes per Minute. 34 SPM, Backstop Depth. 24.0158", Maximum Plate Width to Front. 24.0158", Maximum Plate Width to Rear. 9.8425", Table Height. 31.4961", Electrics. 220/3/60, Approximate Machine ...more
14 gauge x 10.5' Erbend #EMS-3220, squaring shear, 2022
Category: Power Squaring Shears (Gauge)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Erbend
Model: EMS-3220
Year: 2022
Used 2022 Erbend EMS3220 Shear, Max Thickness (gauge) 14 gauge Length of Blade 10.5' Dimensions 1950 X 3750 X 1600 Weight 4,431 lbs Control CNC (NC) Spec Sheet, Cutting Length: 10.5 ft (3200mm), Mild Steel: 14 ga (2mm), Stainless: 18 ga (1.2mm), Aluminum: 3mm, Cut per minute: 35, Motor Power: 4Kw.
14 gauge x 12' Tennsmith #LM1214, shear, 30" back gauge, 35 SPM, 5 HP
Category: Power Squaring Shears (Gauge)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Tennsmith
Model: LM1214
Year: 2016
Excellent condition, Maximum Shearing Capacity, Mild Steel 14 gauge/2,0mm Mild Steel Rated Materials 80,000 Tensile / 44,000 Yield Maximum Shearing Capacity, Stainless Steel 18 gauge/1,25mm Stainless Shear Rated Materials 90,000 Tensile / 55,000 Yield Maximum Cutting Length 127 in/3225mm Back gauge Range 30 in/762mm ...more
10 gauge x 10' Cidan #SM-R-1010, shear, 2008
Category: Power Squaring Shears (Gauge)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cidan
Model: SM-R-1010
Year: 2008
Listing Information, ID # 677634, Stock # LA, Brand CIDAN, Model SM-R-1010, Type Power Squaring Shears (Gauge), Year 2008, Condition Used - Good, Return Policy as-is, Location Wisconsin, United States, Cidan SM-R-1010 10' x 10 ga Shear, Max Gauge 10 gauge, Length of Blade 10', Hyd/Mech Mech.
9 gauge x 10' Macsher #3060-04, mechanical power squaring shear, new, 2020
Category: Power Squaring Shears (Gauge)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Macsher
Model: 3060-04
Year: 2020
MACSHER MRGM 3060-04, Max Gauge 9 gauge, Length of Blade 120.5", Hyd/Mech Mech, Back Gauge 39.37", Power 10 hp, SPM 35 strokes/min., Dimensions (W, L, H) 88.5" by 148.4" by 55.1", Weight 8,818 LBS, Control CNC (FUJI Touch Screen), Ball Transfer Table Front Blade Gap Adjustment, FUJI Touch Screen ...more
Power Squaring Shears (Inch)
6 Results
1/4" x 10' Cincinnati #1810, mechanical power shear, 36" front operated power back gauge, 15 HP, 60 SPM
Category: Power Squaring Shears (Inch)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Cincinnati
Model: 1810
Brand CINCINNATI INC Model 1810 ID # 638448 Type Power Squaring Shears (Inch) Condition Used - Good Location Wisconsin, United States Return Policy as-is Stock # LA, ¼” X 10’ CINCINNATI MODEL 1810 MECHANICAL POWER SQUARING SHEAR, Max Thickness 0.25" Length of Blade 10' Hyd/Mech Mech Back Gauge 36" ...more
2/8" x 12' Wysong #1238, mechanical shear, 36" motorized back gauge, 20 HP, 50 SPM, 2 sets of blades
Category: Power Squaring Shears (Inch)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Wysong
Model: 1238
Wysong 1238 Shear - 12' x 3/8" Capacity, Max Thickness 0.375" Length of Blade 12' Hyd/Mech Mech Back Gauge 36" Power 20 hp SPM 50 strokes/min. Dimensions 240" L x 78" W x 68" H Weight 37,000 lbs Motorized Back Gauge, Power Stacking Conveyor, 2 Sets of Blades Spec Sheet Shearing Capacity,Nominal 12' x 3/8", Shearing ...more
1/4" x 13' Amada #M-4065, hydraulic shear, 10" sq.arm, 174.4" blade, 15 HP
Category: Power Squaring Shears (Inch)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amada
Model: M-4065
Make Amada, Model M-4065, Capacity ¼" at 13’ long, Backgauge 9 Position Front Operated, Squaring Arm 10", Gap Length 2.56", Blade Length 174.4", Motor Size 15 HP, Weight 31,000 Lbs, Amada Push Button Control, 16 Hold Downs.
5/16" x 12.3' Ermaksan #HGD, hydraulic swing beam shear, 18 hold downs, 2017
Category: Power Squaring Shears (Inch)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Ermaksan
Model: HGD
Year: 2017
1/2" x 10' America Hercules #S500120, hydraulic shear, 36" back gauge
Category: Power Squaring Shears (Inch)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: America Hercules
Model: S500120
3/4" x 10' American Hercules #SD-2510, hydraulic shear
Category: Power Squaring Shears (Inch)
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: American Hercules
Model: SD-2510
Ram (Die Sinker) EDM
1 Result
Charmilles #Form-20, Electrical Discharge Machine sinker, 11.8" x 15.7" table, 11.8" X, 9.8" Y, 9.8" Z, 32 amp, chiller, 2009
Category: Ram (Die Sinker) EDM
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Charmilles
Model: FORM-20
Year: 2009
Brand CHARMILLES Model FORM 20 ID # 633800 Type EDM Sinkers Condition Used - Good Year 2009 Location Arizona, United States Return Policy as-is Stock # LA, Power Pack 32 A Table Size-W 11.8" Table Size-L 15.7" X 11.8" Y 9.8" Z 9.8" Dimensions 37.7" x 39.3" x 81" Weight 1720 (LBS) Erowa 3R Chuck, Chiller Spec Sheet ...more
Single Spindle CNC Drill
1 Result
Akyapak #Meteor-Plus-1ADL 1200 beam drill, 2019
Category: Single Spindle CNC Drill
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Akyapak
Model: METEOR PLUS 1ADL 1200 BEAM DRILL
Year: 2019
2019 AKYAPAK METEOR PLUS 1ADL 1200 Beam Drill, Working Length: 40', Profile Height: 2"- 47", Profile Width: 2"- 47", Support Table Height: 40", Length: 50', Height: 10', Width: 10', Maximum Tool Length: 12", Drilling Capacity: 3/8" - 1-1/4", RPM: 10 RPM - 1500 RPM, Spindle Power: 15 HP, Total Power: 60 ...more
Lissmac #SBM-M1000B2-60, slag grinder, power adjustment for material thickness, 4 brush motors, 2012
Category: Slag Grinders
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lissmac
Model: SBM-M1000B2-60
Year: 2012
Used 2012 Lissmac SBM-M 1000 B2-60, Dimensions 103" L x 56" W x 71" H Weight 5,000 lbs Power Adjustment for Material Thickness, Power Adjustment of Steel deburring Brushes, (4) Brush Motors, Spec Sheet Max Workpiece Width: 39.37", Max Material Thickness: 3/4", Max Load: 660 lbs, Variable Speed Belt: 0-157 IPM, Main ...more
Spinner Hanger Shot Blasters & Conveyor Shot Blasters
1 Result
Doral #6048, structural plate shot blast 62" wide plate, 30" x 48" I-Beam, (6) 25 HP blast wheels, 2016
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Doral
Model: 6048
Year: 2016
2016 Doral 6048 Structural Plate Shot Blast 62″ wide plate, 30″ x 48″ I-Beam Spec Sheet PLATE 62” WIDE, STRUCTURAL I-BEAM 30” X 48”, MISC PARTS With various design configurations of work fixtures allows special blast part geometry and size parts to be blasted., WORK CONVEYORS ...more
AGT #Beam-Master-BM48R2, structural steel burning system, Robot: Fanuc Arcmate 120iD/12L with R-30iB Control, Power Source: Lincoln Powerwave R450 w/ Binzel W500 Water Cooled Torch, 2021
Category: Steel Burning System
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Agt
Model: BEAM-MASTER-BM48
Year: 2021
2021 AGT Beammaster & Layout Master available to be inspected under power, AGT Beammaster & AGT Layoutmaster Spec Sheet AGT Beammaster: BM48R2 [50-BM48R²], Robot: Fanuc Arcmate 120iD/12L with R-30iB Controller, Power Source: Lincoln Powerwave R450 w/ Binzel W500 Water Cooled Torch, Material Handling: ...more
Amtek #BC4048-5STP, semi-automatic oxy fuel burning machine, great condition
Category: Steel Burning System
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Amtek
Model: BC4048-5STP
Spec, Dimensions: 82″ x 94″ x 84″, Weight: 2,500lbs (uncrated), Control: CNC (Amtek CNC Controller), 5-Axis Oxy-Fuel Structural Cutting, Cuts Top Flange, Bottom Flange, and Web, Maximum Beam Width: 40″, Minimum Beam Width: 3″, Maximum Flange Height: 20″, Rat Hole Distance to Flange: ...more
Lincoln #Python-X, structural steel burning system, Versafab CNC, 2015
Category: Steel Burning System
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lincoln
Model: PYTHON-X
Year: 2015
Spec, Control: CNC (VERSAFAB), Beam Cutting Capacity: Min 4″ x 4″ – Max 48″ x 18″, Channel Cutting Capacity: Min 3″ x 1″ – Max 36″ x 4″, HSS Tube Cutting Capacity: Min 2″ x 1″ – Max 12″ x 18″, Angle Cutting Capacity: Min 2″ ...more
LVD #V20-1525, turret punch, 2011
Category: Turret Punches
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Lvd
Model: V20 1525
Year: 2011
Manufacturer: LVD, Model: V20 1525, Mfg Year: Nov 2011.
Vacuum Industrial Cleaners
1 Result
Mac-Tech Slat boss, laser slat cleaner
Category: Vacuum Industrial Cleaners
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Mac-Tech
POWER: 230 V – 3 PHASE – 2 AMP (OPTIONAL 230/460 3PH DUAL VOLTAGE), WEIGHT: 55 POUNDS, LENGTH: 59 INCHES, SLAT THICKNESS - STANDARD SLAT.118" (CAN BE ORDERED FOR.090" &.157"), MIN SPACING BETWEEN SLATS MIN: 1.22 (31MM), BREAKER SELECTION – FOR 2.3MM, 3MM, 4MM, WORKING SPEED 236 IPM ...more
Vertical Band Saws
2 Results
18" x 38" Hyd-Mech #V-18A, vertical band saw, 10 HP, 198" x 1.25" blade, automatic infeed, 1998
Category: Vertical Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hyd-Mech
Model: V-18A
Year: 1998
Hydraulic Tilt, Hydraulic Blade Tension, Hydraulic Blade Guide, Auto Infeed, Hydraulic Digital Control, Spec Sheet Capacity: 18.5″ X 20.5″, Capacity At 45 Degrees: 14.5″ x 18″, Capacity Round at 45 Degrees: 13″, Head Tilts / Miters : 45 degrees either direction, Blade Speeds:65 to 385 ...more
Marvel #E380-PC3, PC3 programmable CNC control, 5 HP, 70 FPM
Category: Vertical Band Saws
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Marvel
Model: E380-PC3
Year: 2016
Power 5 hp Blade Width 1.25" Blade Length 16" FPM 70 Control CNC (PC3 PROGRAMMABLE).
Vertical CNC Machining Centers
4 Results
Fanuc #Robodrill-a-D21SiB5, CNC vertical machining center, 5-Axis, 11.8" X, 11.8" Y, 12.9" Z, 10000 RPM, 21 automatic tool changer, 2018
Category: Vertical CNC Machining Centers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Fanuc
Model: ROBODRILL-A-D21SIB5
Year: 2018
Brand FANUC Model ROBODRILL AD21SIB5 ID # 635421 Type Vertical Machining Centers Condition Used - Excellent Year 2018 Location Minnesota, United States Return Policy as-is Stock # LA, 2018 Fanuc Robodrill a-D21SiB5 w/65,000 RPM Air Turbine High Speed Spindle Option, X 11.81" Y 11.81" Z 12.99" RPM 10,000 RPM # ATC 21 ...more
Haas #VF-3, vertical machining center, 40" X, 20" Y, 25" Z, 7500 RPM, 48" x18"table,Cat 40,20 HP, 1997
Category: Vertical CNC Machining Centers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Haas
Model: VF-3
Year: 1997
Voltage: 208/230, Phase: 3, Control: Haas, Table Size: 48" x 18", Max Table Load: 3,500 lbs, Travel:, X-Axis Travel: 40", Y-Axis Travel: 20", Z-Axis Travel: 25", Spindle Nose to Table Top:. 4" - 29", Spindle Taper: CAT 40, Spindle Speed: 7,500 RPM, Spindle Motor: 20 HP, Rapid Traverse ...more
Haas #VF-4, vertical machining center, 50" X, 20" Y, 25" Z, 32 automatic tool changer, 52" x 18" table, 7500 RPM, 1996
Category: Vertical CNC Machining Centers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Haas
Model: VF-4
Year: 1996
Make HAAS, Model VF-4, Table Size 52" x 18", Max. Weight on Table 3500 lbs., X-Axis Travel 50", Y-Axis Travel 20", Z-Axis Travel 25", Spindle Speeds 7500 RPM, Motor 15 HP, Tool Capacity 32, Approx. Weight 13,500 lbs.
Hyundai Wia #F500VM, 2015
Category: Vertical CNC Machining Centers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Hyundai Wia
Model: F500VM
Year: 2015
Machine Type: Machining Center, Num. of Axes: 3, Work Support: Bed, Column Construction: Single Column Style: Stationary, Operation Type: CNC, CNC Brand: Fanuc i Series Opt: Siemens 828D, TABLE/WORK SUPPORT, Table Size L x W (in.) 47.200 x 21.600, Max. Workpiece Weight (lbs) 1,764, Pallet Changer Optional, Rotary ...more
Flow #Mach-2-2031B, 30 HP intensifier pumps 60k PSI, 6' x 10' table, 2013
Category: Waterjet Cutters
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Flow
Model: MACH-2-2031B
Year: 2013
Spec, FLOW MACH 2.
Flow #Mach-3-2513B, waterjet, 98" X, 50" Y, 7" Z, 48" x 96" table, 30 HP, 55000 psi, Flowmaster CNC Control, 2010
Category: Waterjet Cutters
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Flow
Model: MACH-3-2513B
Year: 2010
Used 2010 Flow Mach 3 2513b Waterjet - 55,000 PSI 4' x 8', Pump Output 55,000 PSI X 98" Y 50" Z 7" Table Size-W 4' Table Size-L 8' Power 30 hp Control CNC (Flowmaster) 30 HP Hyplex Direct Drive Pump, Dynamic Head, Spec Sheet Cutting Pressure: 55,000 PSI, X - Axis Travel: 98", Y - Axis Travel: 50", Z - Axis Travel: 7" ...more
Omax #Maxiem-1530, CNC waterjet, 2024
Category: Waterjet Cutters
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Omax
Model: MAXIEM-1530
Year: 2024
Like NEW, used during initial training on test samples only. Stored empty and ready to ship., 10' x 5' 2 " cutting, 12' 2" x 5' 8' table, 18' x 13' footprint, 380-480 VAC, 3-phase.
Techni #Intec-612, waterjet, PC based CNC, 66 HP, 66000 psi, 6' x12'cutting area, 2010
Category: Waterjet Cutters
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Techni
Model: INTEC-612
Year: 2010
Spec, TECHNI WATERJET INTEC 612.
Techni #TIJ4100, waterjet cutter, 61" x 123" cutting table, 66000 psi, CNC Control, 2018
Category: Waterjet Cutters
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Techni
Model: TIJ4100
Year: 2018
Make: Techni, Model: TJ4100, Year of MFG: 2018, Cutting Table SIze: 5’1” x 10’3, Cutting Area: 5’ x 10’, Max Air Speed: 700 ipm, Max Cutting Speed: 700 ipm, Machine Size:, L: 3960.0 mm/ 12.1 ft., W: 1860.0. mm/ 6.1 ft., Crash Sensing Break-Away HeadAdjustable Water Height ControlPendant ...more
Woodworking CNC Routers
1 Result
Onsrud #5100M12, router, 200" x 82.6" table, 12 HP, 24000 RPM, HSK-63 taper, 204" X, 84" Y, 9" Z, 2019
Category: Woodworking CNC Routers
Seller: Machine Tool Technologies
Location: Milwaukee, WI
Mfr: Onsrud
Model: 5100M12
Year: 2019
Lightly used 2019 CR Onsrud 5100M12 Router. Less than 50 hours and under power and available to be inspected., Table-W 200" Table-L 82.6" Power 12 hp RPM 24,000 RPM Taper HSK-63 X 204" Y 84" Z 9" Fanuc Oi Handheld Machine Controller System, 12 Station Automatic Tool Changer, HSD ES929 Spindle, Integrated Dust ...more
