Buy or Sell Your Wide Belt Sander

S/S Mesh conveyer w/ variable speed controls, has 6′ 3" (L) x 33" (W) usable conveyor with 36" infeed/discharge height. Conveyor mesh size 3/8" long x 3" wide. Mounted on castors for mobility., OAD: 6’6"L x 44"W x 86"H.

One (1) used 15 x 9 Hammermill Made by American Pulverizer Company Type L Serial number 5682 Four (4) swinging hammers Outboard roller bearings Opening at feed throat is 11" x 9.25" wide 5 HP belt driven motor, variable speed 3 phase, 230/460 voltage All mounted to a steel base belt guard Chamber is bolt in ...more

APEX (USED) MODEL 2052M-DSSD DEBURRING MACHINE, 52" WORKING WIDTH, FOUR HEAD - BELT / DISC / DISC / BELT, 30 HP, 5 HP, 5 HP, AND 25 HP MAIN DRIVE MOTORS, 5-1/2" MAXIMUM THICKNESS, 16" MINIMUM PART LENGTH, 41" TABLE HEIGHT FROM FLOOR, 230 VOLTAGE, 3 PHASE, 2 HP, 3 PHASE POWER FEED MOTOR, 52" X ...more

CANTEK LBS300-5S 3-Sided Moulding Sander5-Head Brush Sander, 11" width and 4" height cap., for 3-sided sanding of linear profiled material. Head Configuration: -- (2) Sets of Top abrasive brushing heads with variable speed adjustment by inverter, 0.75 HP (0.55 kW) motor each. -- (1) Left side head, adjustable up/down ...more

54in Dia. x 52in Long Ball Mill, Type: Ball Mill Condition: Used Condition Size: 54in Dia. x 52in Long Feed Type: Scoop Discharge Type: Overflow With Trommel Screen Discharge Opening Hatch: 22in x 18.5in Pulley: 15.5in Dia., 5-Groove Shaft: 3-3/8in Mounted on Frame: Beams: 6.5in Wide x 20in High x 0.5in Thick Overall ...more

Used 11" Wide EMI Plastics Inclined Conveyor Model RMSC-12-8-4D 1/3HP Motor With Gearbox 7' Length With 36" x 44" Bin Approximate Dimensions: 8' L x 54" W x 94" H.

Used 8" x 40" CDS Cleated Puller, Model CCH 40-8 40" L x 8" W Belts, Manual Height Adjustment 3HP Baldor Motor, 1750rpm, 180Volt - 14Amp Nord Gearbox, 31.92 Gearbox Ratio Durant Ft/min Speed Gauge, Start/Stop Buttons 0.5-44 Feet/Min Speed Rating (FPM is Reading Incorrectly/Slower) SEE VIDEO S/N: 270505 Machine Wired ...more

TCG Technologies, Model D8 TG RBLD, 8 head, rotary, stainless steel, chuck capper with feed hopper and bowl sorter. Rated from 20 to 300 containers per minute – depending on materials, application and machine configuration. Cap size range: 13mm to 89mm, container size range: 1" to 5½" in ...more

Bottle Conveyor. 2-Piece conveyor with maximum aperture/clearance above belt of 4-1/2 in. W x 10 in. H. Flip-top covers. Part #1: Sew-Eurodrive motor, 3/4 hp, 1700 rpm, 230/460 V, 3.05/1.53 amps, 60 Hz, 3 phase. Sew-Eurodrive Speed Reducer, ratio: 15.74, 108 rpm (final). Part #2: Sew-Eurodrive Motor, 1 hp, 1700 rpm ...more

used- anivi 8 x 15 ball mill grinding system 370 hp drive, air classifier & dust collection, complete zircon milling plant. driven by 275 kw (370 hp) motor through 10:1 gear reducer, inside dimensions measure 2420mm diameter by 4500 mm long. includes girth ring, trunnions, and spare motor. system includes ramsey ...more

, Work Area: 255" x 60", Minimum Part Dimensions, LxWxH: 4" x 4" x.08", Maximum Part Dimensions, LxWxH: 255" x 60" x 4", Grinding Belt Speed: 1400 - 4400 FPM, Distance Between Roller & Table:.03" - 4", Height Adjustment Accuracy:.0005", Working Feed Rate:.001 - 40 IPM, Maximum Part Weight: 10,000 Lbs, NOTE: ...more

Conveyor, stainless steel, Rebsock, no belt, with (3) sections drive, intermediate and tail pulley, all 3 pieces idler design with teflon rolls. Conveyor dimensions 25"wide x 49'long; Center roll s 14-1/2" long x 3" diameter, idler 3-1/2" long x 3" diameter. Parts Only., Type: Parts Only, Measurements: 25" Wide X ...more

Stainless steel slicer / segment cutter previously used for meats, belt fed unit with (5) circular blades at end, 12" diameter X 12" slicing area, 3" wide spacing between blades. Includes 16" wide X 10' long top belt and 16" x 10' bottom takeaway. Each belt is driven by a Dura-Drive Plus motorized pulley. ...more

Moline multidirectional, stainless steel, dough sheeter rated up to 100 feet per minute – depending on materials and application. Roller opening range: 0 to 3". a 24" wide x 42" long Neoprene infeed conveyor, 24" wide x 5" diameter stainless steel top/bottom rollers, stainless steel ...more

BATTERY,HD,DISCONNECT, 850 CCA, CANOPY PACKAGE, PRO PLUS, CERTIFICATION ARR, P65, COUNTERWEIGHT,MACHINE,EXTERNAL, FILM, RIDE CONTROL, ANSI, FILM, SELF LEVEL, ANSI, INSTRUCTIONS, ANSI, USA, LANE 2 ORDER, Online Owner's Manual, PACK, DOMESTIC TRUCK, PRODUCT LINK, CELLULAR PL243, REAR LIGHTS, Ride Control, SEAT BELT ...more

Stock Width Capacity 18 inches, Max Stock Thickness Capacity At Full Width.090 inches, LITTELL Servo Roll Feed Straightener Combination Press Feed :, Stock width capacity: 18", Stock thickness capacity:.090" x 18" Wide, Stock thickness capacity:.125" x 12" Wide, Stock thickness capacity:.156" x 06" Wide, S.P.M. ...more

~ Twin Head Crack Bagging Station, ~ 12W x 9.5L Green 50# Capacity Bagger Belt, ~ 12W x 7L Yellow 50# Capacity Bagger Belt, ~ 6L x6W x 4.5D 50# Capacity Bagging Hopper, ~ 6L x6W x 4.5D 50# Capacity Bagging Hopper, ~ Fischbein Empress Model 100 Sewing Head, 35-55 FPM Speed, 8.0mm Material Thickness, 2.5 S{O Adjustable ...more

Unused 24 inch Stock Equipment Company Weigh Feeder:, - 24 inch gravimetric limestone feeder; Model NPG24, - 196NT microprocessor control and VFD drive, - Right hand assembly, - Two-ply polyester belt, - Switches: Discharge pluggage, and material on belt, - Belt motion monitor, - Bottom dust cover, - Automated water ...more

Used Scandia overwrapper model 607RE, 60-120 packages per minute. Ls automatic conveyor with optional automatic infeed. Package size ranges: minimum 2" wide X 3.25" long X 5/16" high. Maximum 8" wide X 6-7/8" long X 2" high. Film: polypropylene, cellophane. Rotary knife. Easy-open feed rollers. Progressive Rotary ...more

CAPACITY: MAXIMUM ABRASIVE BELT WIDTH 37" MAXIMUM WORKING WIDTH 37" CONSTANT PASSLINE 39.37" MINIMUM WORKPIECE THICKNESS 0.0196" MAXIMUM WORKPIECE THICKNESS 4.72" CONVEYOR BELT FEED SPEED 47.2 - 393 IPM CONVEYOR TABLE FEED AREA 32.65", SIEMENS S7 1200 PLC TOUCH SCREEN WITH 10.4" MONITOR (1) ABRASIVE GRINDING HEAD (2) ...more

Friulmac Randomat Multirex End Matcher, with Stackable Spindles for Fast Change-Over Two Profiling Motors: 10 HP (7.50KW) Two Tool Changer Motors: 0.5 HP (0.25KW) Two Infeed/Outfeed Conveyor Belt Motors: 1.5 HP (1.10 KW) Central Conveyor Belt: 3/4 HP (0.55KW) Minimum Part Length: 4-7/8" (120mm) Minimum Part Width: ...more

DCA Model MD121, Continous, stainless steel, powdered, granulated or cinnamon sugar donut coating system with number of donuts per hour – depending on materials and application. Drum : 21" ID; 105" in Length with 1" long x ½" wide inside drum perfs and 55" long x 4¾" ...more

Discharge Height 52" Wide Bucket 10" Electrics 1/2 HP DC Motor Weight 600 Lbs., New Dart DC Controller, Casters.

The Sealmaster TB-210 is a Gold Line standard duty tapped base pillow block ball bearing with a 50 mm shaft bore. Catalog number 710097, UPC 662461053171, with a date code of 10 31 08 on the box label. The unit is supplied in its original Sealmaster factory packaging marked Set Screw, Gold Line, Standard., Designed ...more

Pineapple cutter, dual head buzz cutter, manufactured by Commercial. Includes 12" x 16' feed conveyor, 36" x 22' belt conveyor, 16" x 10' belt conveyor, cleated belt conveyor, motor control panel, operator platform, etc. Unused. Crown removal system is designed to remove pineapple crowns with minimum ...more

Incline Conveyor Plastic Intralox modular chain type belt, 12" wide x 96" long, Infeed height: 30", Discharge height: 53", Frame: 304 stainless steel construction. Voltage: 110 V, 60 Hz, Single phase, driven by Baldor gear head motor, Multi-drive DC variable speed control, portable with casters. Measurements: 12" Wide ...more

Hamer, Model 4000, belt conveyor. a 12" wide x 112" long belt with a 19½" to 24" infeed / discharge range and variable speed controller. Mounted on painted frame with casters, OAD: 124"L x 36"W x 33"H.

MGS, Model TLC, automatic, intermittent, top load auto cartoner and packer with hot melt glue sealer. Rated up to 40 CPM – depending on materials and application. Tray size range: 2" to 9" in Length; 1¾" to 6" in Width; 2" to 8" in Height. 32" long blank tray magazine ...more

Coil weight capacity: 6,000 Lbs., Coil width capacity: 18", Stock thickness capacity:.125" x 18" Wide, Stock thickness capacity:.187" x 06" Wide, Coil O.D. capacity: 60".

4-Station Profile Shaper: -- 6" Chain drive with non-marking rubber top pads traveling on a hardened and ground precision dia. 5/8" round rods, Top pressure beam driven, Heavy duty fabricated transporter frame, Forward and reverse mode and block mode for creating sanding tools -- Precision X & Y axis mounting ...more

196" Long x 16" Wide Vecoplan Conveyor Fiberglass Section For Metal Detector 18" In-Feed Height 96" Discharge Height NEW PVC Cleated Conveyor Belt - 2" High Cleats 24" Spacing On Cleats NEW Gearbox And NEW 2 HP WEG Motor 230/460/3/60 Approximate Dimensions: 190" L x 36" W x 100" H.

One (1) 72" Beck Sheeter Model 'H' Series single rotary knife sheeter., Economical production sheeter. Belt delivery. Operating speed up to 150 cuts per minute. Variable sheet length adjustment via gear setting. Installation operation and maintenance manual. Good overall condition..

DO-ALL DEBURRING MACHINE, PRICE: Loaded on Truck, Our Warehouse, York, PA …… $6,950.00, HMC Stock # 20173-P, Machine Serial No.: 542-99105, Machine Model No.: BRM-2266, New Date: 1999, Capacity, Diameter: 2" to 6", Capacity, Length: 2" to 6", Belt Speed: 2 to 20 FPM, Parts per Hour: 200 to 600, Belt ...more

HOOVER CONVEYOR & FABRICATION 24" x 60' Radial Stacker, Conveyor and Belt Scale.Complete with the following s: -- Full-length Catwalk & hand Railing, -- Electric radial Wheels with pneumatic Tires and gear Reducer. -- 15 HP Electric motor with gear reducer to operate at 400 FPM, 100 TPH, @60 PCF material. ...more

Belt conveyor, 48" wide X 3' long, plastic wash down interlock belting, stainless steel frame, belt driven by 1 HP, 230/460, 1720 RPM motor through gearbox, includes adjustable directional arms mounted above belt, clamped to (2) 2" diameter pipes mounted above the belt. Currently discharges trough 11 lanes on 4" ...more

Make: Durand Wayland, Model: Various, Year: 2021, Machine Location: Upon Request, Durand Wayland Produce Packing Line with Elisam Continuous Bin Tipper, Sizer and Optical System for sorting Round Fruit, 2021, Operational video available upon request, This system is designed for sorting round fruits by size (16 pieces ...more

BATTERY,HD,DISCONNECT, 850 CCA, CANOPY PACKAGE, PRO PLUS, CERTIFICATION ARR, P65, CONTROL, ISO, PROP, DISPLAY, ADVANCED, LCD, CAMERA, FACTORY PDI, FAN, COOLING, DEMAND, FILM, TWO SPEED, HEATER, ENGINE COOLANT, 120V, HYDRAULICS, PERFORMANCE, (H2), INSTRUCTIONS, ANSI, USA, LIGHTS, HALOGEN, Online Owner's Manual ...more

Belt conveyor, 48" wide X 3' long, plastic wash down interlock belting with openings, stainless steel frame, belt driven by 1 HP, 230/460, 1720 RPM motor through gearbox, includes adjustable directional arms mounted above belt, clamped to (2) 2" diameter pipes mounted above the belt. Currently discharges trough 11 ...more

New England, Model NEHCPCL-36, Compact, automatic, stainless steel, bulk plastic container feeder and unscrambler rated from 20 to 120 containers per minute – depending materials and application. 20" wide x 60" long white flexlink container feed conveyor to 70" long x 19" wide vertical ...more

Incline Conveyor. U.S. Electrical motor: 1/2 hp, 1745 rpm, 208-230/460 V, 1.9-2.0/1.0 A, 60 Hz, 3 phase. Belt dimensions: 24 ft. L x 11 in. W. Overall dimensions: 10 ft. 1/2 in. L x 3 ft. W x 8 ft. H.

Arpac Model BPMP5341, automatic, continuous motion, servo controlled, bottom overlap multipack, shrink wrapper and tunnel rated from 10 to 70 packages per minute – depending on materials, application and machine configuration. Product size range: 3" to 12" in Length; 6" to 18" in Width; ...more

4 wide Elevator Conveyor. Infeed at 36. Discharge at 57. Adjustable 6 foot pads. Hopper is 35 x 24 x 19D. Vander Graaf Inc Motor Model No.TM127A25-675NB-STM, Serial No: NS78795A-8 Class: F, Mp: 1.14, Hz: 60, Ph: 3, HP: 0.75, Volts: 480.

VOORWOOD - A117B Shape & SandFeedthrough, single-sided Profile Shaper/Sander with: CPU Readout; feeds from right-to-left. -- 2-3/4" x 2-3/4" Min. part size; 3/8" - 1-1/2" max. thickness; 1-3/4" max. profile face.: -- (3) 5 HP Belt driven Shaping station. -- (4) 1 HP - 1,500 RPM Disc Sanding stations; 0 - 45 ...more

Douglas, 24" wide x 115" long, dual belt, flexlink, tabletop conveyor. (2) 11¾" wide x 115" long flexlink belt, 2" high x 51½" long lane divider, pneumantic lane gate, adjustable guide rails, 36" infeed/discharge height and powered by a 1hp drive., OAD: 120" L x ...more

Pasteurizer, measuring 42" x 11' long, 3-zone, manufactured by Shibuya, Model PC-11027. Includes draper belt, plastic interlocking belt, provisions for feed & discharge conveyor, conveyor drives, piping, etc. New in 1989. Serial# AA1 1261 H. Last used as bottle cooler at brewery., Basis: FOB.

Includes 10HP Granulator, Core, Manufacturer: Mettler Toledo (Safeline division), Model: V48-RAD, Type: Conveyorized metal detection system, Power Supply:, 100–240 VAC, 50/60 Hz, Aperture / Conveyor, (These can vary slightly unit-to-unit depending on configuration), Aperture (opening):, Approx. 9.75" W × ...more

Intralox, Model ARB. Activated Roller Belt conveyors enable accurate and reliable merging and aligning of products. a 24" wide x 45" long flat top belt infeed conveyor, 24" wide x 57" long belt powered by 1 Hp motor drive. Activated rollers powered by product weight. Conveyor has an in feed and ...more

Italpresse Model SP/1-A Automatic Through Feed Case Clamp Maximum working depth:.700 mm (27.6") Minimum working depth: 250 mm (9.8") Maximum working length: 2,500 mm (98") Minimum working length: 300 mm (11.8") Maximum working height: 1,220 mm (48") Minimum working height: 300 mm. (11.8") Maximum through-feed ...more

**ATTACHMENTS PICTURED ARE, Air Conditioner, AUTO RIDE CONTROL, AXLE, DIFF LOCK, BE INCLUDED IN THE PRICING**, COUPLER, HYDRAULIC, STANDARD, DRAIN GROUP, ENCLOSED CAB, ENGINE & TRAVEL SPEED CONTROL, FENDERS, FRONT AND REAR, FILM, US PRODUCT LINK, HEATER, ENGINE COOLANT, 120V, HOOD, PRECLEANER, IMPLEMENT VALVE ...more

Extrusion Belt Puller - Carbon steel unit with a right-to-left belt measuring 4" x 30". Includes digital speed control and powered by a 1 HP, 180/200V motor operating at 1750 RPM., Basis: FOB.