Buy or Sell Your Wide Belt Sander

GO FAST 6 X 12 Master Resaw w/6" x 12" Cut Cap. : -- 20 HP TEFC motor, max. blade height 5-3/4" from conveyor belt x 12" wide; 20"; dia. bandwheels; self-contained hydraulic system with feed speed from 0 - 150 FPM, 10" wide feed belt conveyor; top mounted holddown wheel. -- Complete with: -- Pneumatic blade tensioning ...more

37" TIMESAVERS "LYNX 37MWT-DBB-60" THREE-HEAD WET-DRY, ABRASIVE BELT FLAT PART DEBURRING/FINISHING SANDER, New 2013, Serial No 32403, Model 37MWT-DBB-60, Mfgr No 131878MD, Series "Lynx", Drum Head Followed By (2) Brush Heads Configuration, (2) 6" Diameter Adjustable Brush Heads, (1) 6" Diameter Adjustable Contact Drum ...more

SERIAL.6HP, MODEL.440603, WIDTH OF BELT. 8", LENGTH OF BELT. 107", AREA OF TABLE. 24" X 11", COOLANT. YES, MOTOR HORSEPOWER.5.

, Portable Stainless Steel Inclined Belt Conveyor/Feeder 22" wide built by HFA Conveyors. 93" high Discharge. 75" OAL. inlet hopper is 6' wide and 44" long with a 30" depth. 101" OAH. 1.5" H belt cleat. 7.5" between each cleat. 22" belt width. Appears Unused., Spec Sheet, HFA CONVEYORS..

Crouch Model ET-40 Single Sided Edge Sander 8" x 40" Wood platen Motor - 3HP 3PH 208-230/460V 60cy Rubber Covered Pulley on Drive End 11" x 40" tilting table End table - 10" x 15" Dead Head on Idle end with Wood Form and Graphite Dust Hood on Drive end Serial No. N/A This is a part of a total plant liquidation, Please ...more

Stainless steel belt conveyor, 36" wide x 12'6" straight, flat wire mesh belt, stainless steel construction, includes, 40", 30-degree incline section. Belt openings: 7/16" x 1-5/8". Spacing between belts: 4-5/16", infeed: 12", and 32" discharge height, mounted on aluminum frame. Driven by 1/2 HP, 230/460 Volt ...more

Model FP-3760T #7739, Max. Part Width 37, Abrasive Belt Size 37 x 60, Contact Roller Size 8 Dia., Passline Height 31 37, Max. Thickness Capacity, Min. workpiece length, Max. workpiece weight, 5-1/8 Min 12, need a fixture for smaller parts 275LBS, Conveyor Drive Speeds 16-66 FPM, Infeed Conveyor Length 20, Dust ...more

30’ Long X 38” Wide Hytrol Flatbed Conveyor 2 HP Baldor Motor S/N 548912 10” High Side Walls Does Not Include Starter/Controls Missing Upper Legs, Can Be Fabricated Prior To Shipping Flatbelt – Cannot Be Converted To Cleated Approximate Dimensions: 30' Lx 5' W x 2' H Located In ...more

Cloud / Roberts Model IMP 1500, automatic, intermittent motion, stainless steel, 10 station rotary, pre-made pouch filler and sealer rated from 10 to 50 pouches per minute – depending on materials and application. Pouch size range: 4" to 12" in Width; 6" x 15" in Height, Gusset: 0" to ...more

GES, stainless steel, inclined cleated conveyor. a 28" infeed, 8" wide Intralox style conveyor belt with 2" high cleats set on 6" centers. Conveyor has a 30" long bottom horizontal run, 204" long incline and a 214" discharge. Powered by a ¾ hp motor drive., OAD: 96"L x ...more

Stainless Steel Slight Incline Conveyor. 12 in. W x 18 ft. L flighted belt, 1 in. H flights, spaced 12 in. apart, 4 in. side walls, hydraulic drive.

Nothum, Model VC-40 VersaCoat, predust and breading applicator. a 40" wide x 64" long wire belt, 15" wide x 8" high breading charge port with (4) paddle airlock and waterfall style breading applicator with 4" product clearance. Mounted on a stainless steel base frame with casters., OAD: ...more

Hoppmann Belt Orientor, Automatic, bottle orienter. Uses two 5"L x 1/2"W side belts to orient bottles by their neck using photoeye feedback. Has belt gap up to 8 1/2" wide, 36" hand crank vertical head adjustment, thumb screw adjustment for belt gap, four feedback photoeyes, and E-stop. Designed to ...more

308E2 HEXMN CFG 2, 308E2 HYDRAULIC EXCAVATOR, ALARM, TRAVEL, BELT, SEAT, 76MM RETRACTABLE, BLADE, 91", BOLT-ON, CONTROL AR-AUX (COMMON), CONTROL PATTERN CHANGER, COOLING, HIGH AMBIENT, COUNTERWEIGHT, EXTRA, DRAIN, ECOLOGY, FILM, CALIFORNIA, FILM, PRODUCT LINK, ANSI, FILM, QUICK COUPLER, ANSI, HEATER, WATER JACKET ...more

Elevated Stainless Steel Belt Conveyor. Belt width: 10 in. Conveyor s adjustable side guiderails and (4) casters for easy positioning. Infeed/exit height: 37/50 in. U.S. Motor, 1 hp, 1750 rpm, 208-230/460 V, 3.3-3.4/1.7 amps, 60 Hz, 3 phase. Sycrogear Motor Drive, 84 rpm (final). Overall dimensions: 98 in. L x 26 in. ...more

Burr King 2 1/2″ x 60″ Single Speed Two Wheel Belt Grinder, 960-250, Inventory # 6166, Model: 960-250 (Single Speed), SKU: 90100, Made in USA, Burr King’s family of two wheel grinders provides vigorous contact wheel, workrest and platen grinding in a frame design that pivots to ideal work positions. ...more

950M WHEEL LOADER, Air Conditioner, ANTIFREEZE, -34C (-29F), AUTO DIFFERENTIAL, HMU, AUTOLUBE, STD & LOGGER, AXLES, AUTO DIFF F/R, ED, BUCKET-GP, 114" 4.25 YD3, CAB AR, STANDARD, CAB ROOF CAP, COOLING, 6 FINS PER INCH, Counterweight, COUNTERWEIGHT, 1460KG, COVER, HVAC, PLASTIC, CUTTING EDGE, BOLT-ON, Differential ...more

A.K. Robbins, Flood style, agitated washing segment. Unit designed to effectively wash sand, dirt and other debris from buoyant products. 48" wide x 150" long x 14" deep wash bin removable bottom screens with ¼" diameter holes, (6) top mounted spray bars, (8) bottom mounted spray bars, (11) ...more

Anderson Packaging, stainless steel, rotary card feeder and folder. Rated from 20 to 120 cards per minute – depending on materials, application and machine configuration. a 48" long (3) belt powered magazine, (2) head rotary pick and place, (1) chain set on 12" centers with 1" wide x 2" high ...more

Used 19" x 18' RMZ Fordertechnik belt conveyor, model FB-M-500-2, carbon steel housing, approximately 500mm(19.6") wide x 5270mm(17.28') long rubber belt, driven by 1.5 kw, 230/460 volt motor drive, serial# P12046-01, built 2012.

Burr King 2″ x 48″ Single Speed Three Wheel Belt Grinder, 482, Inventory # 6169, Model: 482 (Single Speed), SKU: 40100, Made in USA, Burr King’s family of three-wheel grinders provides maximum versatility. Contact wheel, platen, work rest support, and loose belt grinding are precision controlled with ...more

Dorner, 16" wide x 190" long stainless steel belt conveyor. 16" wide and 190" long food grade belt has an infeed and discharge height of 38". a 0.33 HP drive, variable speed control, (2) 96" long x 9" wide side mounted pack tables. Mounted on locking casters, OAD: 190"L x ...more

*420F2 BHL ST, TIER 4, HRC, *AIR CONDITIONER, T4, *CAB, DELUXE, *COLD WEATHER PACKAGE, 120V HRC, *COUNTERWEIGHT, 1015 LBS, *ENGINE, 74.5KW,C4.4 ACERT, T4F, *HYDRAULICS, MP, 6FCN/8BNK, ST, *PRODUCT LINK, CELLULAR, PL641I, *PT, 4WD, STD SHIFT, *RIDE CONTROL, *SEAT, DELUXE FABRIC, *STICK, EXTENDABLE, 14FT, BEACON ...more

(NEW) BURR KING BELT GRINDER, MODEL: 482, S, *Can Be Bench Or Pedestal Stand Mounted Depending On Application, *Contact Wheel, Platen and Workrest Support Grinding, *Slack Belt Grinding, *Adjustable Belt Tensioning, *Positive Belt Tracking, *Quick Belt Change, *Large Throat Clearance For Enhanced Work Point Access ...more

(NEW) BURR KING BELT GRINDER, MODEL: 960-400, Bench or Pedestal Mount (Optional), Abrasive Belt Size: 4" x 60", Abrasive Belt Speed: 6500 SFPM, Steel Backup Platen: 4" x 14", 2HP Motor (available in single or three phase), Pricing & HP Difference for three phase., Contact Wheel, Platen, and Work Support Grinding ...more

Burr King 1 1/2″ x 60″ Three Wheel Variable Speed Belt Grinder, 760, Inventory # 6168, Model: 760 (Variable Speed), SKU: 72110, Made in USA, Burr King’s family of three-wheel grinders provides maximum versatility. Contact wheel, platen, work rest support, and loose belt grinding are precision ...more

Used 6" Rietz Extructor, model RE-6-K5F424, stainless steel construction, approximately 6" diameter x 24" long chamber with 12" jacketed section rated 40 psi, 4.5" wide feed opening, belt driven with 10 hp 230/460 volt motor drive, serial# RE-780136, built 1979.

Langen, Model B1-M, Semi automatic, continous motion, servo driven, left to right, horizontal, hand load, hot melt glue cartoner. Rated from 50 to 120 cartons per minute – depending on materials, application, machines configuration and operator dexterity. Carton size range: 1¾ to 7" in Length; ...more

RMC 800 Horizontal Belt Sander Mdl:RMC-806.

Used 12" Stainless Steel Cleated Incline Loading Belt Conveyor - 84" Ht., Stainless steel sheet cladded loading hopper with a capacity of approximately 20 cubic foot, Hopper is polycarbonate covered with 20" hinged, White vinyl belt is 11.75" wide with 2" split cleats spaced at 12" on a fixed ...more

Autoweigh Belt Feeder. Model: 302-12''XLC. S/N: 88/2268. Belt width: 12 in. Maximum aperture/clearance: 8 in. W x 5 in. H. Height at conveyor inlet/outlet: 30 in. Infeed hopper dimensions: 20 in. L x 20 in. W x 15-1/2 in. H. AutoWeigh Micro VI Control Panel, S/N: AP1354, panel is touchpad controls and digital ...more

80 long 42 wide belt Caterpillar C2.2 Stage V/Tier 4 Final Engine Twin Hydraulic Drive Dandoss OMV 630 Wired remote control Product Link Installed .

Make: Molding Automation Concepts, Model: 15' x 2.5', Year: 2022, Machine Location: California, – Dimensions: 15′ x 2.5′, – Polyurethane Belt, – 20 MM Tall Cleats, – 5″ Aluminum Side Rails With Top Return Lip, – Variable Speed Motor Kit 2-23 FPM, – Toe ...more

SERIAL. 1747-4037, MODEL. S36X75, WIDTH OF ABRASIVE BELT. 36", WIDTH OF CONVEYOR BELT. 36", LENGTH OF ABRASIVE BELT. 75", CONVEYOR SPEED (VARIABLE). 0 TO 60 FPM, PARTS OPENING. 0" TO 6" MAXIMUM, DIAMETER OF CONTRACT ROLLS. 6", LOADING & LOADING AREA. 18" X 36", PNEUMATIC BELT TENSION. YES, PNEUMATIC BELT TRACKING. ...more

Garvey, Model 9700, Stainless steel, table top belt accumulation conveyor. 12" wide x 172" long flat top Intralox product feed conveyor, (1) 12" wide x 96" long and (1) 24" wide x 96" long bi-directional accumulating belts which feed into the product conveyor. Mounted on a stainless steel ...more

SKU: 135218, Model: PR-900NDA, Condition: Used, S/N: 040315, Electrical :, Voltage: 460 volts, Phase: 3-phase, Dimensions: 76.00 (H) x 78.00 (W) x 99.00 (L) inches, Additional :, Working width: 36" // 915 mm, Sanding belt size: 36" x 75" // 940 mm x 1905 mm, Main motors:, - Planer head: 30 hp, - First ...more

Used P.E.W.E DeWater Systems belt filter press, model DBP-705, stainless steel feed pan, nominal capacity.5 - 3 cu meters/hour, approximately.5 meter wide belts with.75 hp and 2 hp, 230/460 volt belt motors, pneumatic belt tension adjustments, multiple spray wash bars, doctor knife solids discharge, built 10/2012.

Tuc, Model TECONV-L-75, inclined compression conveyor. 12" wide x 126" long belt. 72" long bottom horizontal run with an 18" infeed height to 40" long inclined compression belt zone to 14" long top horizontal run with 56" discharge height. Powered by 0.16 Hp drive with variable speed ...more

BIESSE/VIET - OPERA R 1.0: 36" W Robotic Denibbing Sander with Automatic Sanding Head Changer & Laser Scanner -- Perfect for: 5-Part doors; end panels; inner side of profiles; rebates; window frames, etc. -- Sands panel with: Grain in any orientation. -- Smooths multilevel surfaces, as well as small internal ...more

(1) USED TIMESAVERS Lynx 19MWT-DDDD-60, Wet Process Abrasive 4 Belt Deburring/Surface Finishing Machine, The Timesavers Lynx 19MWT-DDDD-60 is four top heads. It has four 6” contact drums powered by four 20 HP motors. The machine is engineered for wet operation. Metal parts are treated with a flood of coolant. ...more

** USED** IN GOOD condition** Canadian price $2,500.00, * Working width: 15'', * Working height: 6'', * Minimum working lenght: 13 3/4'', * Main motor: 7.5HP/3P, * Feed motor: 1/8HP/3P, * Feed speed: 6.2m/min, * Sanding belt dimensions: 16'' x 54'', * Machine size: 1000 x 730 x 1680 mm, * N.W. / G.W.: 450/500kgs, * 3 ...more

Stainless Steel Conveyor. Belt width: 11 in. Maximum aperture/clearance above belt. Cleat height: 1-1/2 in. Distance between cleats: 18-1/2 in. Dayton Motor, 1/2 hp, 3450 rpm, 115/230 V, 80/40 amps, 60 Hz, 3 phase. Motor Drive. Infeed height: 27 in. Exit height: 67 in. Overall dimensions: 72 in. L x 26 in. W x 72 in. H.

Overall Length 5' On Floor 3' Belt Width 9 1/2".

Used Stainless Steel Cleated Flex-wall Belt Conveyor 12"W X 25'L, Stainless steel slider-bed belt conveyor frame with four sets of legs brackets (legs not included)., Vinyl belt with 18.5" width, 11.5" wide between flexwalls, 1.5" cleats spaced at 3.75"., Pulleys: 5.75" diameter X 21.5" ...more

Nercon, painted frame conveyor. a 12" wide x 233" long belt with a 30" to 38" infeed/discharge height range., OAD: 243"L x 22"W x 41"H.

MRM Elgin, stainless steel incline cleated belt feeder with amount of product per hour – depending on materials an application. 30½" wide x 36" long x 22" deep (14 ft³) stainless steel product hopper, 13" wide belt conveyor with 3/16" high cleats set on 3-3/16" centers ...more

Pearson Model CE15T, Automatic case erector and bottom taper rated up to 15 cases per minute – depending on materials and application. Case size range: 7.5" to 24" in Length; 7.5" to 16" in Width; 3" to 18.5" in Height. 80" long x 36" wide (4) chain automatic blank case ...more

Inclined cleated conveyor, stainless steel. a 36" long x 30" wide x 17" deep hopper with a 31" infeed height, 16" infeed belt height, 12¼" wide flex lik conveyor belt with 1" high x 11½" wide cleats set on 24" centers. Conveyor has a 35" long bottom ...more