Buy or Sell Your Wide Belt Sander

Inventory No. 0823-213-0248 Manufacturer Hytrol Model No. SC Name Belt Conveyor Arrival Date 03-02-2026 Dimensions L x W x H (inches) 126 x 28 x 46 Capacity 20" WIDE Electrical 3/60/208-230/460 Weight (lb.) 1070 Category Material Handling Condition Used Available Quantity 1 Serial No. 366260 Item (1) 75x24, (2) 78x24 ...more

32- FT Overall Length X 5ft wide belt conveyor, 5ft+Wide Magnetic Head Pulley, 30FT CENTER SHAFT TO CENTER SHAFT LENGTH, Conveyor belt size: 5FT+ wide X 30 FT Length, Self Cleaning Tail pulley & belt tension adjustments, Factory Made: Model # BCR-ST60C26-89-230, Leg extensions & metal plate sheets not attached ...more

New England, Model H/ECS-10, automatic, stainless steel, water fall style cap elevator / feeder and sorter. Rated from 50 to 300 caps per minute – depending on materials and application. Capable of handling screw, snap or childproof caps (with proper change parts). 38" wide x 26" long x 18" deep ...more

Stainless Steel Belt Conveyor - Measures 12" wide x 6'7" long with a stainless steel frame and plastic belt. Includes a 12" x 22" section without a belt for manual task setups. Previously used for conveying wine cases. No motor included., Measurements: 12" wide X 6'7" long, Materials of Construction: Stainless ...more

NORTHTECH NT-EV-920RC Dual Head Wide Belt Sander2-Head Wide Belt Sanding Machine with 37" capacity. : -- First head 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. -- Second head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. -- Two (2) infeed and outfeed ...more

SERIAL. 6153, MODEL. 15SZ12, CAPACITY. 12' X 6', WIDTH OF BELT. 12", FORWARD AND REVERSE, Machine Type.Conveyors Manufacturer.N/A Model.15sz12 Year.N/A Condition.Good.

Stainless steel frame belt indexing conveyor. 7½" wide x 183" long table top product conveyor belt with 2" high cleats set on 11½" centers, 37" to 44" in feed and discharge height range. Mounted on stainless steel leg frame with locking casters. Control panel with push ...more

Northtech Model NT-ES948SE Edge Sander 5HP Main Motor 1/2" (12mm) Oscillating Stroke Drive Wheel: 7"x9-5/8" Manual Table Elevation Side Table Dimensions: 10"x48" Side Table Tilt: 0-45 Degrees End Table Dimensions: 13-3/4"x16-1/2" End Table Tilt: 0-45 Degrees Sanding Belt Size: 9'-134" Sanding Belt Speed: 3,300FPM ...more

LEWCO MDSB ACCUMULATION CONVEYOR18" Belt width, 144' long horizontal medium duty box bed belt conveyor; 1/2 HP TENV, Inverter motor, fixed speed of 60 FPM, 40" nominal belt height (+/- 3"), adjustable (3) support legs. -- Trackmate 120 EMB belt with Clipper lacing. Bottom, end drive, right hand side. -- Roll ...more

Stainless steel, 48" wide x 120" long, belt conveyor with servo controlled laner cylinders. a 48" wide x 120" long Neoprene style belt with a 31" to 36" infeed / discharge height powered by a 3 hp center drive and (2) Intelligent Actuator, model RCP2, diverting cylinders. Mounted on a (6) ...more

Stock #: 172260002, Location: Decatur, GA, Brand: Timesavers, Model: Lynx 37MWT-DD-60, Serial #: SN34751, Year: 2021, Approx. Shipping Weight: 10,000 Lbs., Approx. Shipping Dimensions: 10' L x 8' W x 9' H, Working Width: 36", Belt Size: 37" x 60", Number of Heads: 2 (Dual Drum), Drum Diameter: ...more

Used Metal Belt Conveyor - 33"w X 84", Carbon steel belt, galvanized side cladding, structural steel base frame. DRIVE: 1.75HP, 200 volt AC brushless servomotor (sigma 5 series) with encoder. CONTROLLER: Polaris DP-20 web guide controller keypad display., (2) 3" duct connections off of the belt. 1/32" ...more

Stock #: 114250064, Location: Decatur, GA, Brand: Burr-King, Model: 562, Approx. Shipping Weight: 200 LBS., Approx. Shipping Dimensions: 4' L x 4' W x 5' H, Skidding Fee: $100, Belt Size: 1" x 42", Motor: 3/4 HP, 3450 RPM, Electrical: 115/208-230 V, 9.6/5-4.8 A, 60 Hz, 1 ph, Emergency Stop Switch ...more

Kalamazoo 8″ Belt Sander, Asset # 17274.

Abrasive Belt Size 37" x 60" Motor Size 230 Volts, 3 PH, 60 HZ # of Heads 1 Conveyor Opening 0-5" Floor to Table Height 31 3/8" - 37 3/8" Conveyor Drive Motor 1HP Feed Speed 5-25 FPM Shipping Weight 2150 pounds Max Width 37 inches Max Thickness 5 inches Min. Length 10 inches, Finish Parts From Any Application The EZ ...more

MC3 Conveyor #3 Serial # 28764-3, - Original cost $32,539 CAD, -Purchased from MC3 Manufacturing in Kingsville, ON https://www.mc3mfg.com/, -Received NEW April 27, 2023, hours used since purchase = 0., -230v/3/60- Controls: Incoming 110v, Outgoing 230v, Start/Stop/Variable Speed, Estop, -Motor start switches and ...more

Used Maren Shredding & Baling System, System incluces: Dumper, Pinch belt conveyor shredder, blower & Maren autotie baler Model 203, Still in operation, Maren Model 203 baler, 25 HP, serial 5696., Baler auto tie stands and inserter, Baler appx 30" x 30" feed opening, 30" wide x 36" high x Variable length ...more

Chevron Belt, 230/460, 3 hp, UNKNOWN UNKNOWN.

CLAIR Pass Through Polishing Machine, Capacity, Width: 24" Wide Belt, Current Horizontal Brush: Scotch Brite, 25" Long x 10" Diameter, Appears to be Near New, Manual Hand Wheel for Belt Feed Table Gap Adjustment, Percent Motor Load Current Meter, Variable Speed Feed Belt Control, Pneumatic Filter, Lubricator and ...more

LASM di VOLPATO LS-2N Profile Edge/Oscillating Sander Feed-Through. (2) Station,Tiltable, Through-Feed Sander. -- (2) Belt Sanding Stations: 3" x 96" (80 mm x 2,450 mm)) wide X long belts. -- Each belt includes: 2-Speed 2.4 HP (1.8 KW) motors with 1,378 - 2,755 FPM belt speed, mechanical oscillating action, up to 135 ...more

Serpa, Model 2000WA, automatic continuous motion wrap around hot melt glue cartoner rated from 30 to 120 cartons per minute – depending on materials and application. 1 chain unit set on 9" centers with a carton size range of: 1" to 9" in Length; 1 to 3½" in Width; 5" to 9" in ...more

EMC VENUS 1300 1K. Finishing Sander with (1) Sanding Head: Combination Head.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").Working Unit: Combination Roller & Pad. -- Roller diameter 142 mm (5-5/8"). Rubber covered hardness 85 Shore. Roller pressure adjustment control ...more

Condition UsedStock Number 47518888136.

40"40" x 75"8"31" - 37"6 1/8"Min 8"8 - 40 FPM20"1100 CFM1 HP, 230V, 60A, 3PH2 CFM @ 90 PSI76" x 88" x 81"4,650 Lbs..

Intralox, Model ARB, Activated Roller Belt conveyor. Enables accurate and reliable merging and aligning of products. (2) 16¾" wide x 60" long belts powered by a 1 hp drives. Activated rollers powered by a static plate. Parallel rollers embedded in the belt surface gently align products against ...more

BELT CONVEYOR ASSEMBLY MODEL; MDCS-36-432-100-B25-D08-M32-A6151-PP94-SPH-39.5 -- MDCS Channel slider bed belt conveyor -- Belt width 36" -- Length of conveyor 432" -- Speed 100 FPM -- Belt B25 Trackmate, PVC120, Black, FBS with clipper lacing installed -- Drive; D08 End drive, bottom right -- Motor 1HP, voltage to be ...more

SCMI Sandya Uno 37" Wide Belt Sander.

D M C SYSTEM TM 1650 RRKb - Wide Belt Sander, 1,650 mm (65") 3-Head; A good condition 65" wide machine! (2) contact rollers - (1) combination head - brush roller.Max. workpiece thickness 170 mm (6-11/16"), min. 3 mm (1/8"). Sanding belt length 3,250 mm (128"). -- Head configuration: -- 1st Head: Contact roller, steel ...more

Make: MaxxRech, Model: Telescopic CPM Conveyors, Year: 2023, Machine Location: Indiana, Max Live Load: up to 4,000lb total, Belt: 2‑ply PVC, 30″ width, MR3‑23/74: this is a 3‑stage telescopic conveyor with a, Contracted base length of23ft and an extended length of74ft, 480 Volt / 3 Phase / 60 ...more

AEM - 502-37: Dul Head Wide Belt Sander2-Head; 36" width capacity; 0 - 5-1/2" thickness capacity with: Rubber-covered contact roll and adjustable finishing platen. ● 1st Head. Rubber-covered contact roll; 5-1/2" dia.; 25 HP motor. ● 2nd Head. 2-1/2" Wide finishing platen; 15 HP motor. -- 37" x 75" Abrasive ...more

24" x 60' Hoover Radial Stacking Conveyor, scales, catwalk & hand railing, 15hp motor running @ 400FPM, 100TPH, @60PCF Material., Includes ThermoFisher Series 10-17-4 Belt Scale + 9101 Integrator., Only 260k tons lifetime use, Used inside of a building since new., ​​​​​​​CONTACT US FOR A FREIGHT RATE.

Used 20" W x 5' L Sanitary Stainless Steel Plastic Link Interlock Belt Conveyor, Stainless steel frame and side cladding (fixed elevation of 33" from floor), 21.5" wide plastic interlocking belt that is 5'-5" between end pulleys, Installed with Reliance Tiger wormgear/chain drive NO MOTOR ...more

Diamond 24in x 36in Jaw Crusher, Make: DiamondSize: 24in x 36inYear: 1953Condition: UsedToggle: Single ToggleFrame Style: Rigid, Max Feed: 22in x 30inDischarge Size: Min: 1inMax: 5inMax Capacity: 210 TPH @ 5in DischargeHas 30in Wide x 25ft Long Belt Under CrusherMounted on Towable Trailer, Drive: Electric Motor Power ...more

SERIAL. WB6859, MODEL/YEAR. OFZ-M2-900 (1994), WIDTH OF BELT. 36", HEIGHT UNDER BELT. 3/16" TO 6" ADJUSTABLE, RUBBER BELT. YES, PNEUMATIC TENSION. YES, PNEUMATIC TRACKING. YES, FEED BELT MOTOR. 3/4 HORSEPOWER, FRONT TABLE DIMENSION. 20" X 38", DEBURR BRUSH SIZE. 6", GRINDING BELT MOTOR. 15 HORSEPOWER.

Best Industrial, stainless steel belt conveyor. a 22¾" wide x 96" long belt with a 34" infeed / discharge height. Control box with push button start stop and variable speed controller., OAD: 97"L x 33"W x 37"H.

Width of Belt 37 inches Working Height 5.875 inches Conveyor Feed Rate 15 & 30 FPM Sanding Belt Size 37" x 60" Power 15 horsepower Electrical 230V / 3PH Approx. Shipping Dimensions 60 L x 64 W x 84 H Approx. Shipping Weight 2500 pounds.

Powell Systems complete form, fill and seal bagging line. Bag size range: 2″ to 7″ in Width; 2″ to 8″ in length with proper change parts. a dimpled vibratory feed hopper with 31″ long x 31″ wide x 16″ deep hopper, 10” wide x 27” long bed with 4″ high side ...more

Nextech 3-Head 53" Wide Belt Sander, Model S52-RRC.

Used Trans Automation Technologies Dual Lane Conveyor. Includes two 3.5" wide x 7' long conveyor frames (no belting), mounted on stainless steel frame with 30" stand and adjustable legs. Serial Number: 1871-8., Measurements: 3.5" wide X 7" long (x2), Materials of Construction: Stainless Steel, Basis: FOB.

Model STM UV Finishing line 24" roll coat, wipers, UV Oven Model CV3 belt conveyor 24" wide x 10' long with 1/2HP motor Mode RC 24-B roll coater Work Maximum work piece dimension 24" w x 3" thick Feed speed 10-40 fpm with 1HP inverter controlled motor Application Roller #1 - Rubber coated UV/chemical resistant, 9 ...more

Used 24" X 30" Ktron Weigh Belt Feeder, 24"W X 30" sanitary vinyl belt, Stainless steel cladding with removable side & top panels, Flanged vent port, Automated 2-way bottom divert gate, 0.5HP washdown duty gearmotor drive, Supply: 90VDC, No controller.

Model: Q324 Rubber Belt Tumble Blast System, Outside overall blast system dimensions: 52" wide x 48" deep x 98" tall (+ 4" shipping pallet height), Blast wheel power: 5HP direct drive, Cabinet volume: 1.5 cubic foot, Inside cabinet dimensions: 15.748" diameter x 25.591" wide, Rubber mill belt load capacity: 220 lbs ...more

Machine Type.Grinders, Belt (Incl Sanders) Manufacturer.TIMESAVERS Model.337M-1 Year.N/A Condition.Used.

38" Approximate Belt Width, 27' Approximate Length, Mounted On Legs, 3HP 3/60/230/460 Volt Electric Motor, Previously Used As Discharge For Shredder.

6 Totals hrs|single top contact roll sanding head powered by a 15 HP motor., Used Timesavers 2111-13-0 CNC Machine (2023 model). This high-performance industrial machine offers precision and efficiency for a variety of manufacturing needs. Its perfect for businesses seeking reliability and advanced CNC capabilities. ...more

Stainless Steel Inclined Product Conveyor Section. Stainless Steel Belt, Drive and Aluminum Ceiling Bracket Support. Conveyer belt dimensions: 16 ft. L x 2 ft. 2 in. W. Overall dimensions: 16 ft. 7 in. L x 4 ft. 4 in. W x 1 ft. 3 in. H.