Buy or Sell Your Vertical Press

Overall Bed Length 16', Dist. Between Housings 12' 6", Bending Capacity 400 Tons, Capacity 10' X 1/2", Stroke 12", Ram Speed (Fast Press) 64 Ipm, Ram Speed (Full Tonnage) 27 Ipm, Ram Speed (Return) 51 Ipm, Open Height 20", Closed Height 8", Bed Height 32", Main Motor 40 Hp, Weight Approx 58,500 Lbs. ...more

EquipmentMarking Machines2013 Voortman V70 Part Stamper2013 Voortman V70 Part StamperHave one to sell?Sell Now1 (714) 253-4707used@jpsint.comConditionUsedQuantity1 availableRequest QuoteLoading.Have one to sell?Sell NowOverviewType:Marking MachinesManufacturer:VOORTMANModel:V70Year:2013Stock #:1240Status:For ...more

This is a second high pressure vessel with a maximum allowable working pressure (MAWP) of 5000 PSIG at 400°F. It s a vertical design with a diameter of 48 inches and operates in sour service conditions. Manufactured by Dynacorp in 2010, it has a maximum pressure rating of 170 PSIG and is constructed as per CRN ...more

Product : CNC through feed machine center with drilling, grooving, & routing of panels from top & bottom to produce two parts at a time, Borings heads: two 58 spindle borings units totally independent of one another, one upper and one lower, each :, 12 vertical spindles X, 16 vertical spindles Y, 3 vertical ...more

Capacity 70 Ton x 6' Tonnage 70 Ton Distance Between Housing 54-1/2" Type Hydraulic Stroke 6" Open Height 12" Closed Height 6" Ram Speed: Approach 44 IPM Ram Speed: Return 63 IPM Ram Speed: Press 0 - 44 IPM Bed Height 28" Throat 8" Back Gauge Travel 24" Safety Curtains No Hydraulic Pressure 2750 psi Horsepower 10 H.P. ...more

SERIAL. P52216, MODEL. HBM-100-8-10, YEAR NEW. 1987, CAPACITY. 100 TON, OVERALL LENGTH OF BED. 10', DISTANCE BETWEEN HOUSINGS. 8'6", STROKE. 7", OPEN HEIGHT. 14", CLOSED HEIGHT. 7", DEPTH OF THROAT. 7", RAM SPEED RAPID ADVANCE. 127 IPM, RAM SPEED NORMAL PRESS. 64 IPM, RAM SPEED ANTI BACK BEND. 20 IPM, RAM ...more

Giddings & Lewis 108” / 120” Live Spindle VTC, Model: 517 Series, Stock #: 10799-I, Serial No.: 517-0006-93, Year: 1993, Table Diameter.108”, Swing Diameter (max.).120”, Height Under Rail (max.).72”, Table Speeds, (2 gear ranges).To 150 RPM, Rail Elevation Travel.28”, Ram Travel ...more

CLICK HERE TO SEE A VIDEO OF THE PRESS Voltage: 480 Phase: 3 Press Rating Ton: 130 Stroke (inches): 8" Ram Open Height w/adjustment up (Inches): 21-1/2" Ram Shut Height w/Adjustment up (Inches): 15" Ram Adjustment Length (Inches): 5" Bed Size (Front to back x Wide) (Inches): 36" x 72" Tested and works as it should. ...more

450-20 CINCINNATI-MILACRON "DUAL- POWER" DIAL-TYPE VERTICAL MILL, Serial No 310554V5U-0003, Model 450-20, Series, Dual-Power Dial Type, Ltr LA, Motor On Knee --- Automatic Table Feed Cycle, Power Rapid Traverse --- Front & Rear Controls, Automatic Backlash Eliminator - Heavy-Duty Vise, Vertical Turret Depth Stops ...more

Complete Automatic Thermofoil (RTF) Line Featuring WEMHONER VARIOPRESS® PROFESSIONAL 3000S Membrane Press Line with (5) Oversized Tray Tables, Automatic VARIO® Pin System, Automatic Foil Cutting, Panel Turner, CEFLA UNOSPRAY 1700 for Adhesive. Press will run with 1500 mm or 1800 mm wide PVC rolls.1. MAIN DATA ...more

Bending capacity: 10' x 14 ga. mild steel, 8' x 12 ga. mild steel, Tonnage capacity: 60 tons, Overall length of bed & ram: 10', Distance between housings: 100", Stroke: 8", Open height: 14", Closed height: 6", Throat depth: 8", Width of bed: 3", Speeds approx.: 130"/minute fast approach, 24"/minute ...more

Stock #: 163250009Location: ALBrand: MagnumModel: 600 TonYear: 2021Loading Fee: Rigging Required, Model: MSS4PS600/48/60/48/36-100 Straight Side, Gibb GuidedCapacity: 600 TonsDaylight: 54″Stroke: 42″Slide Area: 60″ x 48″Bolster Area: 60″ x 48″Rapid Advance: 500 IPMPressing: 30 ...more

12' x 220 TON DURMA CNC HYDRAULIC PRESS BRAKE, MODEL HAP 37200, Capacity. 220 Ton, Overall Length of Bed & Ram. 12', Distance Between Housings. 10'6", Bending Capacities. 12' x 1/4", 10' x 3/8", Stroke (Adjustable). 7.48", Open Height. 13", Throat Depth. 16", SPM @ Max. Stroke. 6 SPM, Speeds. ...more

Trumpf 160″ x 187 Tons CNC Press Brake, V-170, Inventory # 9847-C, Model: V-170, Capacity: 160″ x 187 Tons, Max. Bending Length: 13′ 4″, Distance Between Housings: 145″, Stroke, Adjustable: 14.37″, Distance from Floor to Bed: 41″, Open Height: 21.6″, Closed Height: ...more

UTUBE NUMBER: 4199, MANUFACTURER: UCG, YEAR: 2025, Capacity: 30 Ton, Stroke: 3″, Distance Between Posts: 36″, Bolster Plate with slug drop 2.75″ x 24″ x 32″ with 3 different rail positions., Ram Plate 1.75″ x 24″ x 32″ with slot For T rail plate., Top plate 1.75″ x ...more

Pre Owned Toyokoki HYB-125-30 CNC Hydraulic Press Brake, Serial Number: 4824, Capacity 110 Tons, Overall Length of Bed & Ram 118”, Distance Between Housings 100.3”, Open Height 13.38”, Stroke 7.87”, Throat 16.14”, Working Height 37”, Bed Width 7.4”, Back Gauge Range ...more

TONNAGE FORMING/PUNCHING 100/66 DISTANCE BETWEEN HOUSINGS 6' - 5" BED/RAM LENGTH 8 feet BELOW GRADE no WEIGHT 15000 pounds TOP BED HEIGHT 35 inches BED WIDTH 4 inches THROAT DEPTH 6 inches RAM STROKE (FULLY ADJUSTABLE) 6 inches OPEN HEIGHT 13 inches CLOSED HEIGHT 7 inches HORSEPOWER 15 HP RAM SPEEDS (IN INCHES PER ...more

9" x 48" BRIDGEPORT EZ TRAK DX CNC VERTICAL KNEE MILL, Model EZ Trak DX, S/N BR271713E, Stock# Q12229, Bridgeport EZ Trak CNC Control- X& Y Axis CNC Controlled Digital Readout on Quill, 3HP HH Roberts Head, VFD Controlled Spindle 4200 Max RPM, Drawbar, Automatic Lubrication System., CATALOG : Table Working Surface ...more

Thanks to its quiet operation and low energy consumption, the B-GENIUS-E™ press brake has about 69% less energy consumption than hydraulic press brakes. No hydraulic oil is required for the operation of the machine. Maintenance costs are minimal since there are not any hydraulic system components, such as ...more

DOALL TF-14 VERTICAL TILT FRAME BAND SAW, MANUFACTURER - DOALL, MODEL - TF-14, MACHINE NUMBER - 337-76153, TYPE - VERTICAL TILT FRAME BAND SAW, CUTTING CAPACITY - UP TO 14" FOR SQUARES AND ROUNDS, VERTICAL CAPACITY - UP TO 21", VOLTAGE - 220, PHASE - 3, HERTZ - 60, AMPS - 10.6, BAND LENGTH - 158 TO 160.

SERIAL.30C443, MODEL. 30C, DEPTH OF THROAT. 15", WORKING SURFACE OF TABLE. 30" X 24", OVERALL TABLE SIZE. 35" X 29", SPINDLE SPEEDS. 50 TO 1000 RPM, FEEDS.005 TO.045, DISTANCE FROM SPINDLE TO TABLE. 34" MAXIMUM, TRAVEL OF SLIDING HEAD. 17", VERTICAL ADJUSTMENT OF TABLE. 12", SPINDLE TRAVEL. 12", DIAMETER OF SPINDLE. ...more

Tonnage 100 tons Hyd/Mech hydraulic Punching 66 BH (Distance Between Housings) 8' 5" Bed/Ram Length 10 feet Below Grade no Weight 19000 pounds Top Bed Width 35 inches Bed Width 3 inches Throat Depth 6 inches Ram Stroke (Fully Adjustable) 6 inches Open Height 13 inches Closed Height 7 inches Horsepower 15 Ram ...more

LISEC FPS 35/25U2 Automated Gas Filling Machine - 3500 x 2500 (137" x 98")+ Measuring Section Fully automated gas filling machine designed for gas filling, assembly and pressing of insulating glass units. The tried and tested system of filling the sealed chambers with gas from the bottom up reduces turbulence to zero. ...more

SERIAL.27810, MODEL.WT120M-C309SS1-TT10, CAPACITY. 12 TON, STROKE. 0" TO 12" MAXIMUM, OPEN HEIGHT. 18", CLOSED HEIGHT. 6", DEPTH OF THROAT. 10", AREA OF BED. 17" X 23", RAM SPEEDS ADVANCE. 211 IPM, RAM SPEED PRESSING. 167 IPM, RAM SPEED RETURN. 246 IPM, ADJUSTABLE RAM PRESSURE. YES, MOTOR. 7-1/2 HORSEPOWER.

Station 1:, PNEUMATIC PANEL FEEDER, Panel Pusher feeds individual panels from side loaded (w/forklift) scissor lift into panel cleaner. Photo electric eye activates arm that pushes panel into panel cleaner., Pusher arm: to feed panels into machine on demand, Switch: for remote mounting, Pass Line: 44", 24" Stroke with ...more

MODEL: HSD-S-275-11, SERIAL #: HS432, 84" x 49" BED, 9.84" STROKE, 27.5" SHUT HEIGHT, 5.9" RAM ADJUSTMENT, 15-30 SPM, T-SLOTS RAM & BOLSTER, 27.5" WINDOWS, TRIAD PRESS CAM CONTROLS, ISB LIGHT CURTAINS, FLOOR STANDING, 1992, EXCELLENT CONDITION.

(1) NEW 35 Ton Magnum C Frame Hydraulic Press, Capacity: 7.1 to 35.0 Ton (adjustable), Bed Area: 19" lr x 16" fb, Stroke: 1" to 10" (adjustable), Daylight: 16.3", Shut Height: 6.3", Throat: 8", Speeds:, Rapid Advance: 55 ipm (120 ipm with optional #3 Regen), Pressing: 55 ipm, Retract: 67 ipm, Reservoir: 20 gallon ...more

SERIAL.: 26015, MODEL.: FQ-75, TONNAGE.: 75, STROKE.: 18", DAYLIGHT.: 30", BED SIZE.: 34" X 25", THROAT.: 13", PISTON DIAMETER.: 8", SPEEDS:, APPROACH.: 260 IPM, PRESS ADJUSTMENT.: 115 IPM, RETURN.: 230 IPM, CYLINDER BORE.: 7", ROD DIAMETER.: 5", MOTOR.: 30 HP, MAX OPERATING PRESSURE.: 3900 PSI, Machine Type.Presses ...more

SERIAL. P-31763, MODEL. B1-55, YEAR NEW. 1991, CAPACITY. 55 TON, STROKE OF SLIDE. 3", SLIDE ADJUSTMENT. 4", SHUT HEIGHT, SDAU. 21", AREA OF BED. 24" X 25", AREA OF RAM. " X ", WIDTH OF HOLE THROUGH BACK. ", STROKES PER MINUTE. 120 SPM, AIR CLUTCH & BRAKE. YES, CLUTCH & BRAKE CONTROL. WINTRESS, PRESS MONITOR ...more

-Model: HF-1236 109PXYR.H., -8" Wide, -36" Stroke, -0.020" - 0.090" Thickness Capacity, -5 Roll Straightener, -Press Mounted, -Overall Dimensions: 96" L x 12" W x 12" High, -Estimated Weight: 500 lbs., -In Storage: Toledo, OH..

For Sale: A beautiful 4K-72 DeVlieg Jig Mill with 60" of vertical travel. Late Model. Exact sge is unknown., s: 3-axis Digital Readout, 1,450 RPM, Overall condition is excellent, Inspect under power, Offered "as is, where is, Detroit, MI, For more informstion please call "sales" 586-754-9200.

Overview, Type:CNC Milling MachinesManufacturer:ACRAModel:PLUS MILLSStock #:1837Status:For Sale, Used 10" x 54" Acra 3 Axis Vertical Milling Machine with CNC controller. Motorized table adjustments. Manual vertical adjustment, Table Working Surface 54" x 10" (1372 x 254 mm), X Axis Travel 35" (889 mm), Y Axis Travel ...more

Year Built - 2000, Pressing Capacity.88 Tons, Stroke.5.1", Shut Height.17.9", Speed.50 - 95 SPM, Bolster Area.40.5" x 23.6", Bolster Thickness.5.3", Slide Area.21.7" x 17.7", Slide Adjustment.3.2", Main Motor.10 HP, Electrics.480V/3Ph/60Hz, Link Drive, Operator T-Stand w/Palm Buttons, Air Counterbalance, Wet Type ...more