Buy or Sell Your Makino A51
AI-ranked results for makino a51 - closest matches first
Daewoo Doosan #Puma-2000SY, CNC Turning Center, Fanuc 18iTB, 23.6" swing, 2.5" bar, 2003
Industrial Machinery NJ, LLC | Livonia, MI
Category: CNC Lathes and Turning Centers
Seller: Industrial Machinery NJ, LLC
Location: Livonia, MI
Mfr: Daewoo Doosan
Model: PUMA-2000SY
Year: 2003
2003 Daewoo PUMA 2000SY, CNC Turning Center, Max Turning Diameter: 12.99″, Swing Over Bed: 23.62″, Swing over the Saddle: 21.65″, Max Turning Length: 20.07″, Max Bar Capacity: 2.55″, X Axis Travel: 9.84″, Z Axis Travel: 22.83″, Y Axis Travel: 3.93″ (+ 1.96″ – ...more
Nakamura #Super-NTJ, Multi-Axis CNC Turning Center, 13.58" X, 3.54" Y, 48.82" Z, 7.48" max. turning diameter, 26" swing, 2003
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Nakamura
Model: SUPER-NTJ
Year: 2003
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-T CNC Control, 8,258 Hours Cutting ...more
JUST ADDED!
Tsugami #B0205-II, CNC swiss type automatic lathe, .79" dia., 8.3" lgth, Fanuc Oi-TD, LNS chip conveyor, 2013
MachineStation | Lake Elsinore, CA
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Tsugami
Model: B0205-II
Year: 2013
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc Oi-TD CNC Control, Controlled Axes (Liner ...more
Tsugami #S206, .79" diameter, 9.8" length, Fanuc 32i-MB, Edge Minuteman 320 SE bar feeder, Tri-Mist collector, 2012
Machine Tool Bids | Chicago, IL
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Tsugami
Model: S206
Year: 2012
MACHINE, Max Turning Diameter: 0.79 (20 mm), Max Turning Length: 9.843 (250 mm), Max Turning Length with Gripping Unit: 8.26 (210mm), Max Bar Capacity: 0.79 (20 mm), Max tool positions: 25, Max. Main Spindle Drilling Diameter: 0.39 (10 mm), Max. Main Spindle Tapping Diameter: M8, Max. Back Spindle Chucking Diameter: ...more
Westfalia #CA505, Tricanter Centrifuge, Stainless Steel, 3100 RPM, 100/50 HP, solid bowl, 20"/12" diameter, Control panel, on stand, 1989
Perry Videx LLC | Hainesport, NJ
Category: Tricanter Centrifuges
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Westfalia
Model: CA505
Year: 1989
Used Westfalia CA505 Stainless Steel Tricanter Centrifuge, Manufacturer: Westfalia, Model: CA505-02-10, Serial: 1694-080, Year: 1989, Bowl dimensions: 20"/12" dia., Max. bowl speed: 3,100 rpm, Material of construction: stainless steel, Main motor drive: 100 hp, Additional information: solid bowl design, 50 hp ...more
Jagura #JAG-KG-AL, Blade Sharpener/Grinder, 300 mm Travel, 0-4 MPM Table Speed, 12000 RPM Spindle, 1/2 HP
Machinery Exchange International | Posen, IL
Category: Knife Grinders
Seller: Machinery Exchange International
Location: Posen, IL
Model: JAG-KG-AL
JAG.KG.AAL 930913L5 2004 Model JAG-KG-AL max. travel front to back 300mm left to right 300mm Cross feeding graduation 0.005mm Table speed 0-4m/min Roller speed 0-380 rpm Swivel angle ±45° Feeding method front to back manual left to right automatic Spindle speed 0-12000 rpm Main Motor Roller ...more
WH Stationary Main Contact Assembly For Dsl-206 / Dslii-308, Upper Stud
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DS For Equipment Type DSL-206 For Equipment Type DSLII-308 Unit Amperage 800A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
Evoqua Water Technologies, RO/DI Water System, 60 HP, skid mount
Federal Equipment Company | Cleveland, OH
Category: Reverse Osmosis Systems
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Evoqua Water Technologies
Used Evoqua Water Technologies RO/DI Water System, with (6) tube RO system, prefilter, 60 hp Grundfos pump, skid mounted with RIO Panel and power distribution panel, CDI continuous electrodeionization unit, (6) IonPure LX units, Carbon Tower bed, main control panel with HMI, serial# 10262039, built 2023.
JUST ADDED!
200 HP Electric Motor
Ben Jones Machinery | Waverly Hall, GA
Seller: Ben Jones Machinery
Location: Waverly Hall, GA
2020 Model Siemens SINAMICS Multi-Drive VFD Control Cabinet – 225A Main – Drives to 100 HP, Industrial Siemens SINAMICS variable frequency drive cabinet featuring five (5) PM240 drives in a heavy-duty two-door enclosure., Professionally engineered multi-motor lineup suitable for conveyor systems, process ...more
Gleason #104, straight bevel coniflex gear generator, conventional Control, 1956
Gibbs Machinery Co | Warren, MI
Seller: Gibbs Machinery Co
Location: Warren, MI
Mfr: Gleason
Model: 104
Year: 1956
, Cone Distance: 0 to 4-1/2", Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min), Extreme Ratio: 10-to-1, Pitch Diameter: 10-to-1 ratio; 8-1/2" (max), Pitch Diameter: 1-to-1 ratio; 6" (max), Diametral Pitch (coarsest): 3 DP, Diametral Pitch (finest): 20 DP, Face Width: 1-3/8" (max), Index Range: 9 to 93 ...more
JUST ADDED!
Haas #DS-30Y, CNC lathe, 31.7" swing, 10" chuck, 17.8" dia., 21" lgth, 30 HP, 4500 RPM, automatic tool presetter, 2018
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: DS-30Y
Year: 2018
Tool Holders! Sub Spindle! Y Axis!, The Haas DS-30Y CNC Lathe (2018) is a high-performance turning center designed for efficient single-setup machining. twin spindles and Y-axis capability, it performs turning, milling, drilling, and tapping with precision. Ideal for producing complex automotive, aerospace, and ...more
Tsugami #SS20, CNC Swiss Lathe, 7-Axis0.75" Machining diameter, 8.66" Machining length, 0.39" drilling diameter, 24 Tool capacity, 2008
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Tsugami
Model: SS20
Year: 2008
2008 TSUGAMI SS20, MACHINING DIAMETER 0.75″, MAX MACHINING LENGTH 8.66″, MAX DRILLING DIAMETER 0.39″, MAIN SPINDLE MOTOR 5 hp, MAIN SPINDLE SPEED 10,000 RPM, BACK SPINDLE MOTOR 5 hp, BACK SPINDLE SPEED 10,000 RPM, TOTAL TOOL CAPACITY (POSITIONS) 24, LIVE TOOL SPEEDS 5,000 RPM, CONTROLLABLE AXES 7 ...more
314 Ton, Eemco, 24" x24", up-act 4-post, 18" stroke, 13" daylight, elec.platens, 20" ram, #203
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Eemco
CLEARANCE BETWEEN POSTS: 30" L to R X 8" F to B. POST DIAMETER 6". DAYLIGHT 13" WITH PLATENS, 22 \u00bd" WITHOUT. STROKE 18". MAIN RAM: 20" DIAMETER, SINGLE ACTING, 2 \u00bd" NPT PORTS, RATED AT 2000 PSI. TWO ELECTRIC PLATENS: 25" L to R X 30" F to B, WITH STRIP HEATERS AND TWO LEFT TO RIGHT TEE SLOTS. HALF-SURROUND ...more
314 Ton, Eemco, 24" x24", up-act 4-post, 18" stroke, 13.5" daylight, elec.platens, relay controls, #3850
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Eemco
CLEARANCE BETWEEN POSTS: 30" L to R X 8" F to B. DAYLIGHT 13 \u00bd" WITH PLATENS, 22 \u00bd" WITHOUT. APPROX STROKE 18". MAIN RAM: 20" DIAMETER, SINGLE ACTING, 2 \u00bd" NPT PORTS, RATED AT 2000 PSI. TWO ELECTRIC PLATENS: 25" L to R X 30" F to B, WITH STRIP HEATERS AND TWO LEFT TO RIGHT TEE SLOTS. HALF-SURROUND ...more
Mazak #HTC-400, CNC horizontal machining center, 24 automatic tool changer, 22" X, 20" Y, 20" Z, 10k RPM, Mazatrol 640MT Control, 1999
Orca Machine Tools Inc. | Fridley, MN
Category: Horizontal CNC Machining Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mazak
Model: HTC-400
Year: 1999
CNC Control yes Type of CNC Control Mazatrol 640MT PC-Fusion-CNC Pallet Size / No. of Pallets 15.74’’x 15.74’’ / 2 Table Indexing 15 Degree Table Load Capacity 660 lbs. X Axis 22.05″ Y Axis 20.08″ Z Axis 20.08″ Spindle Nose to Table Top 2.75” – 22.83” Table ...more
52" Timesavers #2331-45-006, Segmented Widebelt/Polisher, 3-Head, 5" thick, 15-45 FPM, 5250 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2331-45-006
Timesavers Model 2331-45-006 Three Head 52" Segmented Widebelt/Polisher : Abrasive belt size: 52 x 103" Main motor first head: 30HP Main motor second and third heads: 25HP Maximum width stock: 51" Minimum part size: 17" Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45 FPM Approximate full load ...more
Excel #XLR-SFM-100-S, Udly SM-600-500 sludge master, magnetic seperator, 2016, #11863
Yoder Brothers Machinery | Toledo, OH
Category: Superfinishers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Excel
Model: XLR-SFM-100-S
Year: 2016
Weight3575 pounds, SERIAL: 15101701, MODEL: XLR-SFM-100-S, YEAR: 2016, OPERATION INFORMATION:, NO. OF SUPERFINISHING HEAD (SF HEAD): 1 NO., SPINDLE SPEED: 200 TO 1000RPM (VFD), S.F HEAD MAIN SLIDE RAPID SPEED: 0-50 MM/SEC, S.F.HEAD MAIN SLIDE FEED SPEED: 0-15 MM/SEC, S.F.HEAD MAIN SLIDE LEAST MOVEMENT: 100 MICRONS ...more
DMG, Mori #DMU-50-Gen-III, 5-Axis CNC vertical machining center, Heidenhain TNC 640 3D CNC color Control, 25.6" X, 20.4" Y, 18.7" Z, 30 automatic tool changer, 20000 RPM, 2019
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Dmg
Model: DMU-50-GEN-III
Year: 2019
DMG MORI DMU 50 GEN III CNC 5 Axis Machining Center, NUMBER OF TABLES / PALLETS 1, TABLE SIZE – L 24.8″, TABLE SIZE – W 19.6″, WEIGHT ON TABLE 660 lb, MAIN SPINDLE HORSE POWER 28 hp, SPINDLE NOSE TO TABLE 5.9″ ~ 24.6″, MAIN SPINDLE SPEEDS 20,000 RPM, MAIN SPINDLE TAPER 63, X – ...more
JUST ADDED!
Tsugami #TMA8F, multi-axis CNC lathe, Fanuc 31i-B5, automatic door, tool presetter, 2021
Premier Equipment Inc | Altamonte Springs, FL
Category: CNC Lathes and Turning Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Tsugami
Model: TMA8F
Year: 2021
Tsugami TMA8F Multi-Axis CNC LatheStandard s Include a Full Function B-Axis Tool Spindle Capable of 5-Axis Machining of the most complex part, a 60-station Automatic Tool Changer, Automatic Tool Presetting Device, Main & Sub Spindle with.001 Deg “C” Axis for Rotary Milling and Fine Positioning (subject ...more
52" Timesavers #2331-45-066, Segmented Widebelt/Polisher, 3-Head, 5" thick, 15-45 FPM, 5830 CFM, unused
RT Machine | Hughesville, PA
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 2331-45-066
Timesavers Model 2331-45-066 Three Head 52" Segmented Widebelt/Polisher : Abrasive belt size: 52" x 103" Main motor first head: 30Hp Main motor second and third heads: 25HP Maximum width stock: 51" Minimum part size: 6 x 6" with Vacuum Maximum thickness opening: 5" Infeed loading area: 14" Feed speed: 15-45 FPM ...more
23" x 75" Alfa-Laval #Aldec-G2-60, Decanter Centrifuge, Stainless Steel, 1.2 kg/dm3, 17.7" diameter x 75.2" L Bowl, 3250 RPM Bowl, 50/20 HP, 460 V
Aaron Equipment Co | Schaumburg, IL
Category: Decanter Centrifuges
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Alfa-Laval
Model: ALDEC-G2-60
used- alfa laval decanter centrifuge, model aldec g2-60, factory refurbished in 2021. 316 stainless steel. maximum solids density 1.2 kg/dm3. bowl max. main speed: 3250 rpm, bowl: 1910mm length x 450mm diameter, beach angle: 20 degrees. solids discharge type 10 bushings, solids discharge radius: 129mm hubs. process ...more
DMG, Mori #Sprint-20/5, CNC Swiss type lathe, Fanuc 32i-B Control, Iemca Ideal 325 barfeed, 2018
Premier Equipment Inc | Altamonte Springs, FL
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Dmg
Model: SPRINT-20/5
Year: 2018
DMG Mori Sprint 20/5 CNC Swiss-Type Lathe (subject to buyer verification):Complete machining of workpieces measuring up to ø 0.8 × 23.6 in in a footprint of under 21.5 ft²Max. workpiece diameter 0.8 in.Max. workpiece length 7.1 in.Max. bar diameter 0.8 in.Max. X-axis travel 2 in.Max. Y-axis travel ...more
6000 lb. GMC #HDC-4820-3T, Hydraulic Decoiler Machine, 3 ton, 48" width, 39" outside dimensions, 100 FPM, 4 HP, 220 V., 3ph
Wheeler Machinery Sales | Pomona, CA
Category: Uncoilers and Centering Coil Reels
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: HDC-4820-3T
Coil size 48 wide, Coil ID 20, hydraulic clamping range from 18-1/2 to 20-3/4, Max coil OD 39, Max coil weight 3Tons = 6,600LBS, Speed: 0-100/min., Hydraulic system pressure: 0-15Mpa, Main motor: 4HP, 220V only, 3phase, Hydraulic motor: 4HP, 220V, 3 phase, Hydraulic tank capacity: 10 Gal, Machine net Weight, LBS ...more
150 Ton, Williams, 30.5" x24.5", upact 4-post, 36" stroke, 28" daylight, 12" ram, 60" work height, #295
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Williams
DISTANCE BETWEEN POSTS IS 32" L to R X 10" F to B. 3 \u00bd" POST DIAMETER. MAIN RAM: 12" DIAMETER, SINGLE ACTING, RATED AT 2700 PSI, 1 \u00bd" NPT PORTS. APPROX 36" STROKE. 28" DAYLIGHT. FULLY GUIDED WITH 5" BOLT ON BUSHINGS. TWO SINGLE ACTING, BREAK AWAY CYLINDERS: 3 \u00bd" BORE, 1 \u00bc" ROD, APPROX 12" STROKE ...more
1/4" x 10' GMC #HS-1025E, hydraulic shear, 18" throat, 10-12 SPM, electric Back Gauge, (4) 24" front support arms, 60" squaring arm
Manufacturing Solutions | Santa Ana, CA
Category: Power Squaring Shears (Inch)
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: HS-1025E
Standard s:, ISO 9001 certifiedTaiwan machinescomes with go-to NC power back gauge with touch screenQuick Change Blade Gap Adjustment (BGA), with gap dialCE standard “OMERO” electric control systemMeet OSHA safety standard codeShadow line for accurate straight cuttingAdjustable cutting length and ...more
1200 Amps, Square D, Large Industrial Electrical Distribution Panel, 4-wire, 480Y/277 V.AC, 3PH
Ben Jones Machinery | Waverly Hall, GA
Seller: Ben Jones Machinery
Location: Waverly Hall, GA
Mfr: Square D
Square D HCRU I-Line Electrical Distribution Panelboard – 1200A, Heavy-duty Square D HCRU I-Line® industrial distribution panelboard, factory-configured for large plant and mill service., Main Rating: 1200 Amps, Voltage: 480Y / 277 VAC, Phase: 3-Phase, Wiring: 4-Wire, Series: E1, Panel Type: HCRU (industrial ...more
JUST ADDED!
Daewoo Doosan #DVF-5000, 5-Axis CNC vertical machining center, Fanuc 31i-B5 color CNC Control, 24.6" X, 17.7" Y, 15.7" Z, 60 automatic tool changer, 18000 RPM, 2022
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Daewoo Doosan
Model: DVF-5000
Year: 2022
DOOSAN DVF5000 CNC 5-Axis Machining Center / DVF5000, NUMBER OF TABLES / PALLETS 1, TABLE SIZE – L 19.7″, TABLE SIZE – W 17.7″, WEIGHT ON TABLE 881 lb, INTEGRATED NC ROTARY TABLE SIZE 0″, MAIN SPINDLE HORSE POWER 29.5 hp, MAIN SPINDLE SPEEDS 18,000 RPM, MAIN SPINDLE TAPER 40.0, X – ...more
5 KV Sa Gmi-50 Indoor Switchgear
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Siemens-Allis
Manufacturer Siemens / Allis Chalmers Product Family GMI Type of Medium Voltage Indoor Vacuum Switchgear GMI Switchgear Voltage 5000 Main Bus Amps 3000A Tie Bus Amps Feeder Bus Amps Main/Tie Sections Feeder Sections Potential Transformer PT Fuse Amperage Control Power Transformer CPT Fuse Amperage Capacitor Trip ...more
5 KV Sa Gmi-50 Indoor Switchgear
National Switchgear - Circuit Breakers etc. | Lewisville, TX
Seller: National Switchgear - Circuit Breakers etc.
Location: Lewisville, TX
Mfr: Siemens-Allis
Manufacturer Siemens / Allis Chalmers Product Family GMI Type of Medium Voltage Indoor Vacuum Switchgear GMI Switchgear Voltage 5000 Main Bus Amps 3000A Tie Bus Amps Feeder Bus Amps Main/Tie Sections Feeder Sections Potential Transformer PT Fuse Amperage Control Power Transformer CPT Fuse Amperage Capacitor Trip ...more
Westfalia #CB300-01-02, centrifuge decanter, 1999
Sully Enterprises | West Jordan, UT
Category: Decanter Centrifuges
Seller: Sully Enterprises
Location: West Jordan, UT
Mfr: Westfalia
Model: CB300-01-02
Year: 1999
Qty 1, Westfalia CB300-01-02 Decanter Centrifuge, Year 1999, Previously used for wastewater processing in a food production facility, as well as distillers grains, 300 x 900mm Bowl, 100mm inch Conveyor Pitch, 10° Beach Angle, Gravity discharge solids, Liquid discharge under pressure, 18.5kW Main Drive Motor, 3.0kW ...more
Weima #Woodchuck, Vertical Feed Wood Waste Grinder, 24" x 41" hopper, 0.74 cu.yd., 35 HP, 10" rotor diameter, 100 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Woodworking Shredder
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Weima
Model: WOODCHUCK
Year: 2026
WEIMA Woodchuck Low Noise Slow Speed Vertical Wood Waste Grinder:A low cost/investment solution for Woodwaste disposal - feasible for a small shop.: -- 25 HP Main Drive motor; 24" x 41" hopper opening, 0.74 cu. yds cap; 10" dia. rotor, 100 RPM. -- : -- (28) 40 mm x 40 mm Concave, indexable cutters; 6" discharge ...more
15 & 7.5 Ton, Dresser, double girder bridge crane, 56' span, top running, pendant controls
Yoder Machinery Sales | Holland, OH
Category: Overhead-Bridge Cranes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dresser
SPAN. 56', CAPACITY MAIN HOIST. 15 TON, CAPACITY AUXILIARY HOIST. 7.5 TONS, TOP RUNNING. YES, DOUBLE GIRDER. YES, PENDANT CONTROLS. YES.
30/5 Ton, Shawbox, overhead bridge crane, 60' Span
G-2000 | Toledo, OH
Category: Overhead-Bridge Cranes
Seller: G-2000
Location: Toledo, OH
MAIN HOOK CAPACITY. 30 TON, AUXILIARY HOOK CAPACITY. 5 TON, SPAN. 60', LIFT. 40', OVERHEAD CLEARENCE. 73", RADIO CONTROL. YES, TROLLEY GAUGE. 84", Machine Type.Cranes, Bridge & Overhead Manufacturer.SHAW BOX Model.N/A Year.N/A Condition.Used.
30/5 Ton, Shawbox, overhead bridge crane, 60' Span
G-2000 | Toledo, OH
Category: Overhead-Bridge Cranes
Seller: G-2000
Location: Toledo, OH
MAIN HOOK CAPACITY. 30 TON, AUXILIARY HOOK CAPACITY. 5 TON, SPAN. 60', LIFT. 40', OVERHEAD CLEARENCE. 73", RADIO CONTROL. YES, TROLLEY GAUGE. 84", Machine Type.Cranes, Bridge & Overhead Manufacturer.SHAW BOX Model.N/A Year.N/A Condition.Used.
Gardner #2V18-18, vertical, 18" wheels,rotary feed,dresser,incremental feed,S28431
Perfection Global | Elk Grove Village, IL
Category: Vertical Spindle
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Gardner
Model: 2V18-18
Wheels Diameter: 18"Rotary Parts Carrier Diameter: 34", Manual Swing Arm DresserIncremental Feed to Upper & Lower SpindlesAuto & Manual Feed ControlCoolant in Base(2) 10 HP AC Main Drive Spindle MotorsAC Rotary Carrier Vari-Speed MotorPush Button Operation.
6.5 Ton, Manesty #Novapress-Diamond, tablet press, single sided, #3454-3
Federal Equipment Company | Cleveland, OH
Category: Tablet Press Machine
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Manesty
Model: NOVAPRESS-DIAMOND
Used Manesty rotary tablet press, model Novapress Diamond, 45 station, B tooled, 1 ton pre-compression, 6.5 ton main compression, keyed upper punch guides, single sided with force feeder, 5/8"(15.87mm) max tablet diameter, 11/16"(17.46mm) depth of fill, speeds up to 270,000 tablets/hour capacity, Manesty serial# NOV ...more
Brausse #TA900, Folder Gluer, up to 800 g/m2 Stock range, 425 m/min. belt speed, 12740 mm overall length, 22 kW, 2012
Machinery Solutions Group Inc | Crystal Lake, IL
Category: Folder Gluers
Seller: Machinery Solutions Group Inc
Location: Crystal Lake, IL
Mfr: Brausse
Model: TA900
Year: 2012
2012 Brausse TA900 Folder Gluer, The Brausse TA900 is a high-speed folder-gluer that s hot and cold glue valves as well as glue detection sensors to ensure quality production. It can fold and glue up to 40 pt. paperboard stock and corrugated stock in a single pass at speeds of up to 70,000 c/p/h. The Brausse TA 900 ...more
1/4" x 10' Cincinnati #1810, mechanical shear, 18" depth of gap, 60 SPM, automatic lube, 11 hold downs, 1950
Revelation Machinery | Chicago, IL
Category: Power Squaring Shears (Inch)
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Cincinnati
Model: 1810
Year: 1950
Make: Cincinnati, Model: 1810, Year: 1950, Machine Location: Oklahoma, Capacity: 1/4″, Length: 10′, Depth Of Gap: 18″, Stroke Per Minute:60, Auto Lube: Yes, Hold Downs: 11, Main Motor: 7-1/2 Hp.
1/2" x 6' Hercules, hydraulic, 6 hold downs, 30 HP, foot pedal, #76818
Smith Machinery Co | Ames, IA
Category: Power Squaring Shears (Inch)
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Hercules
Year: 1978
CAPACITY ---------------------------- 1/2 in, CUTTING LENGTH ---------------------- 6 ft, MAIN MOTOR -------------------------- 30 H.P., ELECTRICS --------------------------- 230-460 VOLT 3 PHASE, 6 HOLD DOWNS, FOOT PEDAL, NOTES:, SUBJECT TO VERIFICATION, * NO BACKGAUGE, DELIVERY:, IMMEDIATE, SUBJECT TO PRIOR SALE.
Oliver #260-D, Double Arbor Tilting Blade Sliding Table Saw, 20" Blade capacity, 24" x 44" Main & 17" x 44" Sliding Tables, 230 V
RT Machine | Hughesville, PA
Category: Woodworking Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Oliver
Model: 260-D
Oliver Model 260-D Double Arbor Tilting Table Saw, in Good Running Condition! Purchase as taken from service, or we can provide a reconditioned price upon request! Ideal for Any Shop Where Ripping and Cross-Cutting will Be Done on the Same Machine Two Direct-Drive Saw Motors, 5 HP 230/460v, 3ph Each Main Table: 24" x ...more
125 Amps, Eaton #1MM412RRLP, Meter Stack, 800A Main 4 Socket 125A 120/240V 1PH CAN SHIP
OK Sales Inc | Burlington, NC
Category: Electric Meter Sockets
Seller: OK Sales Inc
Location: Burlington, NC
Mfr: Eaton
Model: 1MM412
WE CAN SHIP THIS ITEM!, Eaton 1MM412RRLP Meter Stack 800A Main 4 Socket 125A 120/240V 1PH CAN SHIP, Brand: Eaton Model: 1MM412RRLP Type: Residential Meter Stack Module800A Main Bus Rating 4 Socket 125A 120/240V 1PHRinglessOutdoorDimensions: 48.5" x 12.26" x 8".
15 KV Siemens #GM-SG, switchgear with arc flash detection
IC Spares | Los Angeles, CA
Seller: IC Spares
Location: Los Angeles, CA
Mfr: Siemens
Model: GM-SG
Siemens, GM-SG, 15kV, 1200Aarc flash detection2 main generator breakers: 7UM85 Siprotec protection relay, 8 feeder breakers: 7SJ82 Siprotec protection relay.
Featured
Howden, turbine generator
Global Equipment International | Chalfont, PA
Category: Steam W/Out Generator Turbines
Seller: Global Equipment International
Location: Chalfont, PA
Mfr: Howden
Howden TWIN Condensing Steam Turbine with A.C. Generator MFG 2018, OEM: Siemens Turbomachinery Equipment Series SST-110, Unit type: Twin-CA 56, Power output: 6.7MW, Main Steam Temp: 445C, Operates on 900F superheated steam at 800psi., Provides plant process steam at 375F at 46psi, RO make-up water treatment system ...more
WH Moving Main Contact Assembly For Dsl-206 / Dslii-308, Lower Stud
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DS For Equipment Type DSL-206 For Equipment Type DSLII-308 Unit Amperage 800A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
Siemens / Cummins Power Generation #DMCS1002G-040A, generator paralleling switchgear, 6000 Amp, 277/480 Volts
Atlas Electric Inc | Spokane Valley, WA
Category: Metal Clad Switchgear
Seller: Atlas Electric Inc
Location: Spokane Valley, WA
Mfr: Siemens
Model: DMCS1002G-040A
Siemens/Cummins Power Generation Generator Paralleling Switchgear 5000 Amp 480 Volt with the following components and s:, 2 each Main Generator Breakers WLL2A332, 3200 Amp Frame/2500 Amp Trip, Electrically Operated, Draw Out with LSIG functions 1 each Feeder Breaker WLL2A316, 1600 Amp Frame/1250 Amp Trip, Electrically ...more
3/4" Pines #160834G.O, tube bender, 5 HP hydraulic main motor, automatic lube, floor pendant Control, 220 V.
Cleveland Machinery Sales Inc | Cleveland, OH
Category: Tube and Pipe Benders
Seller: Cleveland Machinery Sales Inc
Location: Cleveland, OH
Mfr: Pines
Model: 160834G.O
PINES 160834G.O, 5HP HYDRAULIC MAIN MOTOR, 3/4" CAP ,1966, SCH 80, AUTO LUBE, AUTO TURRET DEGREE STOP, FLOOR PENDENT CONTROL, 220VOLT 3 PH, SEE VIDEO UNDER POWER https://youtu.be/UquztGc6xCs.
20 Ton, Zenar, 45' 10" Span, class C, 22' lift, 10 FPM, 20 HP, TRDG, pendant, 460 V., #63568
Yoder Machinery Sales | Holland, OH
Category: Overhead-Bridge Cranes
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Zenar
SERIAL. 3216, CAPACITY. 20 TON, SPAN. 45' 10", CLASS. C, TYPE OF SERVICE. INDOOR, LIFTING HEIGHT. 22', MAIN HOIST SPEED. 10 FPM, 20 HP, TROLLEY SPEED. 90 FPM, 2 HP, BRIDGE SPEED. 154 FPM, 2.5 HP, RUNWAY RAIL TO TOP OF TROLLEY. 4' 11-1/2", TOP RUNNING BRIDGE. YES, TOP RUNNING HOIST. YES, ***ROTATING ...more
7' -19" Carlton, 160" L x 50" D base, 20 HP, 4" quill, 750 RPM, ex. height column, #6 MT
Cleveland Machinery Sales Inc | Cleveland, OH
Category: Radial Drills
Seller: Cleveland Machinery Sales Inc
Location: Cleveland, OH
Mfr: Carlton
CARLTON 7' ARM X 19" COLUMN, Arm Length. 7', Column Dia. 19", Power. 20 hp, 7' Arm 19" diameter column EX HEIGHT COLUMN, Spindle Speeds 7 1/2-750 RPM w/ 1/2 speed, 878 RPM motor, (15) 1-97 threads per inch, 4" Quill Diameter, Rapid on head, Coolant System, #6 MT spindle taper, 20" spindle travel, 20 HP ...more
400 Ton, Hydromec #HF4000, mechanical forging press, 1997
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hydromec
Model: HF4000
Year: 1997
400 TON HYDROMEC HF4000 NON-FERROUS HOT FORGING PRESS LINE, MANUFACTURER - HYDROMEC, YEAR - 1997, SERIAL NUMBER - 445, MODEL - HF4000 C/D, MATERIAL - NON-FERROUS, TONNAGE - 400 TON (4000 KN), STROKE - 380MM, STROKE PER MINUTE (SINGLE STROKE) - 35-45, RAM ADJUSTMENT RANGE - 100MM, CLEARANCE (STROKE TO BOTTOM ...more
400 Ton, Hydromec #HF4000, mechanical forging press, 2000
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hydromec
Model: HF4000
Year: 2000
400 TON HYDROMEC HF4000 NON-FERROUS HOT FORGING PRESS LINE, MANUFACTURER - HYDROMEC, YEAR - 2000, SERIAL NUMBER - 660, MODEL - HF4000 C/D, MATERIAL - NON-FERROUS, TONNAGE - 400 TON (4000 KN), STROKE - 380MM, STROKE PER MINUTE (CONTINUOUS) - 22-35, STROKE PER MINUTE (SINGLE STROKE) - 22-45, RAM ADJUSTMENT RANGE - ...more
800 Ton, Hydromec #HF8000, mechanical forging press, 2011
National Machinery Exchange | Newark, NJ
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Hydromec
Model: HF8000
Year: 2011
800 TON HYDROMEC HF8000 NON-FERROUS HOT FORGING PRESS LINE, MANUFACTURER - HYDROMEC, YEAR - 2011, MODEL - HF8000 CDL, MATERIAL - NON-FERROUS, TONNAGE - 800 TON ( 8000 KN), STROKE - 400MM, STROKE PER MINUTE (SINGLE STROKE) - 40, RAM ADJUSTMENT RANGE - 150MM, CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) - 1250MM ...more
Cincinnati Cinova #80-307-14, horizontal/vertical mill, 14" x62-1/2"table, #50 NS, pendant Control, coolant, 7.5 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: 80-307-14
SERIAL. 300861, MODEL. 80-307-14, TABLE AREA (T-SLOTTED). 62-1/2" X 14", LONGITUDINAL TABLE TRAVEL. 34", CROSS TABLE TRAVEL. 12", VERTICAL TABLE TRAVEL. 18", OVERARM SPINDLE SPEEDS. (8) 50 TO 760 RPM, MAIN SPINDLE SPEEDS. (16) 25 TO 2000 RPM, LONGITUDINAL & CROSS TABLE FEEDS. (16) 1/4 TO 30 IPM, VERTICAL TABLE ...more
Kearney & Trecker #420TF-17, Vertical/Horizontal Mill, 80" x 17" Table, 1500 RPM, 15 HP
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Kearney & Trecker
Model: 420TF-17
SERIAL., MODEL. 420TF-17, MACHINE TOOLMAKERS VERTICAL HEAD ON OVERARM, TABLE AREA (T-SLOTTED). 80" X 17", LONGITUDINAL TABLE TRAVEL. 42", CROSS TABLE TRAVEL. 14", VERTICAL TABLE TRAVEL. 18", MAIN SPINDLE SPEEDS. (24) 15 TO 1500 RPM, TOOLMAKER'S OVERARM SPEEDS. (8) 50 TO 800 RPM, LONGITUDINAL & CROSS FEEDS. ...more
200 Ton, Albert, 24" x 24", upact.4-post, 16" stroke, 17" daylight, 16" ram, 38" work height, #593
Icon Industries, Inc | Grand Rapids, MI
Category: Hydraulic Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
Mfr: Albert
DISTANCE BETWEEN POSTS: 25" L to R X 14" F to B. NOMINAL PLATEN AREA: 24" X 24". DAYLIGHT 17". STROKE 16". MAIN RAM: 16" DIAMETER, SINGLE ACTING, RATED AT 2000 PSI. 1" NPT PORTS. MOVING BOLSTER HALF SURROUND GUIDES. OPERATOR HEIGHT: 38". OVERALL DIMENSIONS: 40" L to R X 32" F to B X 75" TALL. APPROX WEIGHT: 10,000 ...more
5' x 1/4" WDM #403-6-5, hydraulic initial pinch plate bending, 6" roll diameter, 5 HP, NEW
Smith Machinery Co | Ames, IA
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Wdm
Model: 403-6-5
NOMINAL ROLL DIAMETER -------------------- 6", RATED ROLLING CAP. (MILD STEEL) ---------- 0.25” mild steel plate to 24” diameter x 5' wide, MOTOR ------------------------------------ 5 HP, VOLTAGE ---------------------------------- 230/460/3PH TEFC, APPROXIMATE WEIGHT ----------------------- 4,750 LBS ...more
26" x 13" DoAll #V26, vertical saw, 1" x 177" blade, 50-1600 SFPM, #15364
Vander Ziel Machinery Sales | Alto, MI
Category: Vertical Band Saws
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Doall
Model: V26
DoAll 26” Vertical Saw, Model V26, Asset # 15364, S/N 26451463, Throat Depth: 26″, Work Height: 13″, Max. Blade Width 1″, Max. Blade Length: 177″, Tilting Table Size: 30″ X 30″, Main Table Tilts: 45° R, 10° L, Blade Speeds: 50 – 1,600 Sfpm (Infinitely Variable) ...more
1/4" x 10' Wysong #1025B, mechanical power squaring shear, front operated power back gauge, 55 SPM, 15 HP
Mohawk Machinery Inc | Cincinnati, OH
Category: Power Squaring Shears (Inch)
Seller: Mohawk Machinery Inc
Location: Cincinnati, OH
Mfr: Wysong
Model: 1025B
10' x 1/4" WYSONG "1025B" MECHANICAL POWER, SQUARING SHEAR, Serial No P37-309, Model 1025B, 10' x 1/4" WYSONG "1025B" MECHANICAL POWER, SQUARING SHEAR, Serial No P37-309, Model 1025B, Front Operated Power Back Gauge, (1) Squaring Arm, (3) Front Supports, Automatic Pressure Lubrication System, CATALOG : ...more
Vaughn #H-STF-D3, super fine wire drawing machine, foot jog control, MG set, #11017
Yoder Machinery Sales | Holland, OH
Category: Wire Drawers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Vaughn
Model: H-STF-D3
SERIAL #12834, MODEL #H-STF-D3, CAPACITY -.019 TO.010 (ZIRCONIUM), NUMBER OF DIES - 14, NUMBER OF DIE BLOCKS - 15, DIAMETER OF DIE BLOCK - 3-1/2", VARIABLE SPEED - 30 TO 500 FPM, TRAVERSE LEVEL WIND, SELF CONTAINED SPOOL - 6" FLANG X 3" BARREL X 5/8" BORE, FOOT JOG CONTROL, 2 HP/1150-3000 RPM/DC MAIN MOTOR, MG SET: ...more
Transfer/De-Stacker Line, Outfeed System from Moulder, 16' L outfeed conveyor, 14" width x 21' L scrap conveyor, 14" blade, 60 FPM, 2 HP, 2019
Ex-Factory | Charlotte, NC
Category: Material Handling for Woodworking
Seller: Ex-Factory
Location: Charlotte, NC
Year: 2019
Complete Package on Outfeed System From Moulder Used in Flooring Mfg PlantThe system consist of conveyor coming out od moulder to feed cut off saw -- Outfeed conveyor for board up to 16' long -- Transfer conveyor and board flipping up to 16' long, drive motor 2 HP -- Incline conveyor for 2' high (from the ...more
43" x 83" Northtech #NT-12-1100RC, 2-Head Wide Belt Sander, 10" drum, 6" combi head, 30/20 HP, 15-60 FPM, 460 V.
RT Machine | Hughesville, PA
Category: Woodworking Planers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-12-1100RC
Working Width: 43" Sanding Heads: (2) (1) 10" 75 Shore; Spiral Grooved Rubber Contact Drum (1) 6" Spiral Grooved Rubber Combination Head with 3.4" wide 65/45 shore dual layered felt Main Spindle Motor: 30HP / 20HP Feed Motor: 3HP Table Elevation Motor (PLC Touch Screen):.5HP Confi guration: Rubber Roller - Combination ...more
JUST ADDED!
100 KW Cummins #DGDA, diesel generator set, 120/208 Volts, 561 hours, 170 HP @ 1800 RPM, 6BT5.9-G6 engine, weatherproof enclosure, 180 gal. sub-base fuel tank, 2003
Central States Diesel Generators LLC | Waukesha, WI
Category: Diesel Generators
Seller: Central States Diesel Generators LLC
Location: Waukesha, WI
Mfr: Cummins
Model: DGDA
Year: 2003
Cummins 100 kW standby (90 kW prime) diesel generator set model DGDB, SN-G030523640. Cummins 6BT5.9-G6 engine rated 170 HP at 1800 RPM, SN-46318537. 3/60/120/208V, 12 lead reconnectable to other voltages. 160/400 Amp main-line circuit breaker. PMG - permanent magnet generator. PowerCommand digital control panel. ...more
Knuth #KMT-B-NC, Motorized Swing-beam Plate Shear
Blumberg Machinery Co | Bannockburn, IL
Category: Plate Shears
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Knuth
Model: KMT-B-NC
KMT B 1304 NCKMT B 2552 NCKMT B 2554 NC Working Area Structural steel plate thickness 0.03 - 0.16 in 0.03 - 0.08 in 0.03 - 0.16 in Working length 51 in 100 in 100 in Cutting angle 2.4 deg 1.6 deg 1.8 deg Strokes per minute (automatic mode) 30 Knife length 53 in 101 in 101 in Work table height 33 in Support arms 23.62 ...more
ITE Stationary Main Contact Assembly For K-3000 / K-3000s
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Ite
Manufacturer ABB / ITE / BBC Product Family K-LINE For Equipment Type K-3000 For Equipment Type K-3000S Unit Amperage 3000A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
Nakamura #NTRX-300, 12" chuck on main & sub, 80 ATC, 1000 psi chipblaster, part gripper load/unload, 2016
Machinery Inc | Sherbrooke, QC
Category: CNC Lathes and Turning Centers
Seller: Machinery Inc
Location: Sherbrooke, QC
Mfr: Nakamura
Model: NTRX-300
Year: 2016
2016 Nakamura NTRX-300 CNC Turning Milling Machine, Date of Mfg. 2016-3, Power ON. 37780H 22M, RunTime. 14574H 48M, NT-Smart-X controller, 12" Chuck on main and sub spindle, Ugraged 1000 psi Chipblaster high pressure coolant, 80 position tool changer, Part gripper for loading and unloading, CAPACITY, MAX TURNING ...more
Midwest Automation #CS-5230, countertop saw w/ routers, 16" blade capacity, 4 pneumatic hold downs, 1995
Ex-Factory | Charlotte, NC
Category: Countertop and Postform Equipment
Seller: Ex-Factory
Location: Charlotte, NC
Model: CS-5230
Year: 1995
MIDWEST AUTOMATION CS-5230 Countertop Saw (w/Routers)For cutting off or mitering postformed and/or coved tops.: 42" Crosscut cap.: At 90 38"; at 22-1/2 30" cut at 45; fixed miter positions for 90 - 45 & 22-1/2.: 5 HP - 3,400 RPM Main motor; 0.5 HP carriage drive motor; fixed feed speed 22 FPM.Includes: 16" Blade ...more
Bbc Stationary Main Contact Assembly For Lk8, Lke8
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Brown Boveri
Manufacturer ABB / ITE / BBC Product Family LK For Equipment Type LK8 Unit Amperage 800A Type of Contact Assembly STATIONARY MAIN Shipping Width 8 in Shipping Height 8 in Shipping Depth 8 in Shipping Weight 4 lb.
Hyundai Kia #SKT250SY, Fanuc 18iTB, 30 HP main, 10 HP sub, 3" bar, Y-Axis, live tools, parts catcher, tool setter, chip conveyor, 6,132 cut hrs., S/N SKT250SY 0008, 2006
Machinery Solutions Inc | Lexington, SC
Category: CNC Lathes and Turning Centers
Seller: Machinery Solutions Inc
Location: Lexington, SC
Mfr: Hyundai Kia
Model: SKT-250SY
Year: 2006
Capacity:, Swing over bed ...more
2.6" x 1.5" Reed-Prentice #A22, 3-Die Thread Rolling Machine, (7) 108-720 RPM Die Speeds, 7.5 HP
Yoder Brothers Machinery | Toledo, OH
Category: Thread Rollers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Reed-Prentice
Model: A22
SERIAL. A22-432 MODEL. A22 INFEED DIAMETER - STD. EQUIPMENT. 1/4" TO 2-5/8" THREAD LENGTHS - STD. EQUIPMENT. UP TO 1-1/2" THREAD LENGTHS - THRU-FEED EQUIPMENT. UP TO 11" STANDARD DIE SPEEDS. (7) 108 TO 720 RPM MAIN MOTOR. 7-1/2 HORSEPOWER.
Featured
500 Ton, Stamtec #S1-500, SSSC press, 17.7" stroke, 31.5" die height, 9.84" slide adj., 11-20 SPM, very good
Visionary Manufacturing Solutions | Rochester, MI
Seller: Visionary Manufacturing Solutions
Location: Grand Rapids, MI
Mfr: Stamtec
Model: S1-500
SALE PRICE $425,000, STAMTEC S1-500 PRESS, The Stamtec S1-500 Press is a high-quality press manufactured by Stamtec in the United States. This press is designed to handle various metal forming tasks and is ideal for deep draw work, this is the press for you. With its durable construction and reliable performance, the ...more
WH Stationary Main Contact Contact Assembly For Db-15, Upper Stud
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DB For Equipment Type DB-15 Unit Amperage 225A Type of Contact Assembly STATIONARY MAIN Shipping Width 6 in Shipping Height 6 in Shipping Depth 6 in Shipping Weight 4 lb.
WH Moving Main Contact Assembly For Ds-206s, Lower Stud
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DS For Equipment Type DS-206S Unit Amperage 800A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
JUST ADDED!
400 Amp, Siemens #SB3-REV.A, Switchboard, w/ 17 HEB Breakers & Main, 480 Volts, 2010
Quantum Technology | Shippensburg, PA
Category: 60 Hz Three Phase Transformers
Seller: Quantum Technology
Location: Shippensburg, PA
Mfr: Siemens
Year: 2010
x5 40A breakers, x4 60A breakers, Please note that this is section 1\/4 the data plate is from the section 2\/4, The Data plate was missing., x1 70A breaker, x1 100A breakers, x1 125A breaker, x1 400A Main breaker, 30-Day Warranty & Functional Guarantee Shop with confidence! We guarantee everything we sell to ...more
100 Ton, Eitel #RP100, 8" Stroke, 38" DLO, 7/8" Adj. Stroke, WR Shaft Attachment, 1980
Liberty Machinery Co | Lincolnshire, IL
Category: Hydraulic Straightening Presses
Seller: Liberty Machinery Co
Location: Lincolnshire, IL
Mfr: Eitel
Model: RP100
Year: 1980
New - 1980, Serial No. 25238, Capacity.110 Tons (100 Tons Metric), Stroke - Maximum.8", Straightening Stroke - Adjustable & Controllable.7/8", Daylight.38" Over Bed, Depth of Throat.13-3/4", Main Bed Area.29" L-R x 19-3/4" F-B, Straightening Bed Area.55" L-R x 10-1/2" F-B, Distance Bed to Floor.20", Speeds:, - ...more
Amada #FO3015NT, CNC laser, 5' x'10tbl., 4000 watts, 122.2" X, 61" Y, 7.87" Z, chiller, dust collector, 2005
MD Equipment Services LLC | Crooked River, OR
Category: CNC Lasers
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Amada
Model: FO3015NT
Year: 2005
Laser Cutting System, Manufacturer: Amada, Model: FO-3015NT, Type: Fanuc Laser C4000, A04B-0815-B301, DOM: August 2005, Electrics: 220 Volt, 3 Phase, 60 Cycle, 190 Amps, 55 KVA, s & :,.Table Size: 5' x 10',.Dual Shuttle Table,.Travels:, ….X-Axis Travel: 122.2″, ….Y-Axis Travel: ...more
JUST ADDED!
250 Ton, Stamtec #S2-250, hydraulic press, 9.8" stroke, 22" die height, 5.9" slide adj., 50 HP, 20-50 SPM, excellent
Visionary Manufacturing Solutions | Rochester, MI
Category: Hydraulic Presses
Seller: Visionary Manufacturing Solutions
Location: Grand Rapids, MI
Mfr: Stamtec
Model: S2-250
SALE PRICE $165,000, STAMTEC S2-250 PRESS, The Stamtec S2-250 Press is a high-quality press manufactured by Stamtec in the United States. This press is designed to handle various metal forming tasks and is ideal for small to medium-sized stamping jobs. With its durable construction and reliable performance, the ...more
Featured
250 Ton, Stamtec #S2-250, straight side double crank press, 9.8" stroke, 22" die height, 5.9" adj., 20-50 SPM, excellent
Visionary Manufacturing Solutions | Rochester, MI
Seller: Visionary Manufacturing Solutions
Location: Grand Rapids, MI
Mfr: Stamtec
Model: S2-250
SALE PRICE $165,000, STAMTEC S2-250 PRESS, The Stamtec S2-250 Press is a high-quality press manufactured by Stamtec in the United States. This press is designed to handle various metal forming tasks and is ideal for small to medium-sized stamping jobs. With its durable construction and reliable performance, the ...more
WH Moving Main Contact For Db-50
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family DB For Equipment Type DB-50 Unit Amperage 1600A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 10 lb.
Mazak #Integrex-300-2SY, CNC lathe, 10" chuck, 40 ATC, Fusion 640 MT Control
Orca Machine Tools Inc. | Fridley, MN
Category: CNC Lathes and Turning Centers
Seller: Orca Machine Tools Inc.
Location: Fridley, MN
Mfr: Mazak
Model: INTEGREX-300-2SY
CNC Control yes Type of CNC Control Fusion 640 MT Main spindle chuck 10" Sub Spindle Chuck Size 10" ATC Stations 40 Tooling Type HSK 63 Max. Swing over Bed 24.01” Spindle RPMs 3500 X-Axis Travel 44.88” Z-Axis Travel 44.57” Y-Axis Travel -4.3/+.63 B - Axis 225 Deg. C Axis 360 Deg.0001 Increments : ...more
Mazak #Quick-Turn-Nexus-250-II, CNC Lathe, 24" swing, 13.78" turning diameter, 18.73" max. turning length, 10" chuck, 3.46" bore, A2-8, 35 HP, 4000 RPM, 12 tool, Mazatrol Matrix control, tailstock, **
Toolquip Inc | Lebanon, OH
Category: CNC Lathes and Turning Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mazak
Model: QUICK TURN NEXUS 250-II
Year: 2008
2008 MAZAK QUICK TURN NEXUS 250-II CNC Lathe. s 24" swing, 10" chuck, 35 HP, and 4,000 RPM. Mazatrol Matrix Nexus CNC and chip conveyor., Chuck Size: 10", Swing Over Bed Ways: 24", Max. Turning Diameter: 13.78", Max. Turning Length: 18.73", Speeds: 4,000 RPM, Bore: 3.46", Bar Capacity: 3", Nose: A2-8, Main Motor: 35 ...more
Mazak #VTC-30C, CNC vertical machining center with rotary table,Mazatrol M-Plus Control, 65.3" X, 29.9" Y, 26" Z, 24 automatic tool changer, 8000 RPM, 1998
Premier Equipment Inc | Altamonte Springs, FL
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Mazak
Model: VTC-30C
Year: 1998
Mazak VTC30C CNC Mill with Rotary Table (subject to buyer verification):Table Size: 78.74″ x 29.92″Table Load Capacity: 3000 lbsX Axis Travel: 65.35″Y Axis Travel: 29.92″Z Axis Travel: 26.00″Distance Spindle Nose to Table Top: 5.8” – 31.8”Magazine Capacity: 24 ATCRapid ...more
JUST ADDED!
Okamoto #12-24-SA, Reciprocating Precision Surface Grinder, unused, 2018
Universal Automatics | Richfield, OH
Seller: Universal Automatics
Location: Richfield, OH
Mfr: Okamoto
Model: 12-24-SA
Year: 2019
(1) MIYANO ABX-64SYY Multi-Axis CNC Lathe (used) New 2019 w/low hours, FMB Turbo 5-65 magazine bar loader (12' bars), 2 channel sets, Chip Conveyor, Servo Parts Catcher, Part Conveyor, Part Ejector for Right Spindle (Cylinder Type), Programmable Through Coolant and Air for Right Spindle (Headwall Air Also), Dead ...more
Cincinnati #2M, horizontal mill w/vertical head, 10-1/2" x53" table, 5 HP, #50 taper, #77029
Yoder Machinery Sales | Holland, OH
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Cincinnati
Model: -2ML
SERIAL. E712Z, MODEL. 2M, AREA OF TABLE. 53" X 10-1/2", SPINDLE SPEEDS. 20 TO 417 RPM, LONGITUDINAL & CROSS FEEDS.5 TO 20 IPM, LONGITUDINAL TRAVEL. 24", CROSS TRAVEL. 10", VERTICAL KNEE TRAVEL. 13", TAPER IN SPINDLE. #50, COOLANT. YES, VERTICAL HEAD ATTACHEMENT. YES, MAIN MOTOR. 5 HORSEPOWER.
Selco #2R1050, baler, 50 HP, 72" x 54" infeed opening, 60" x 30" x 45" bale size, 460 V.
Alan Ross Machinery Corp | Zion, IL
Seller: Alan Ross Machinery Corp
Location: Zion, IL
Mfr: Selco
Model: 2R1050
- 50HP / 460volt., - Infeed Opening:72" x 54"., - Bale Size: 60" x 30" x 45"., - Main Cylinder: 10" / Ejection Cylinder: 8"., - Tier: Accent 470 using 11 Gauge Wire..
Zafdaroni MSR-160-P, multi-blade saw with top & bottom arbors, 63" width, 38"-50" table height, 60 HP arbor, 3-1/8" x 51-1/2" saw blade, 2026, new
Ex-Factory | Charlotte, NC
Category: Straight Line Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Year: 2026
ZAFFARONI MSR 160 P BS/PD MULTI-BLADE PANEL SAW (W/TOP & BOTTOM ARBORS): -- ZAFFARONI is the "Top of the Line" in Precision Multi-Rip Saws for Panels. Blade Depth is mechanically adjustable with a tolerance of +/- 0.01 mm (0.0004").The Saw is so precise it can also be used for V-Grooving.The Saw blades project ...more
Quick #L-HLPP-2-20-43-8-12, hydraulic Cold press, 2-sided, 20.3' L x 43.3" H x 12" width, (14 & 21) 100 mm diameter x 80 mm stroke cylinder, 10 HP, 2026, new'
Ex-Factory | Charlotte, NC
Category: Woodworking Presses and Cold Presses
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Quick
Model: L-HLPP-2-20-43-8-12
Year: 2026
QUICK L-HLPP-2-20-43-8-12.2-Sided Hydraulic Laminating Press: -- Number of working sections: (2) -- Working width, section #1: 6" and 8" -- Working width, section #2: 8", 10"; and 12" -- Maximum working length: 6,200mm (20.3') -- Maximum working height: 1,100mm (43.3") -- Pressure at the glue line: Up to 175 ...more
2500 Amps, Square D power style switchboard main breaker 600 V.AC w/LSIG, 7-MEF Dist Breakers
EMSCO | Fridley, MN
Seller: EMSCO
Location: Fridley, MN
Mfr: Square D
Square D Power Style Switchboard:, 2500 amp main breaker600 volt AC3 phase4 wireLSIG functionsGround fault interrupterRating plugcat# RP100NEMA 3R outdoor, Pull section & breaker distribution sections, (5) MEF36400LIG400 Amp600 Volt ACLIG Functions400 Amp Sensor (Frame)Rating PlugCat# RP100(2) MEF36600LSG600 ...more
JUST ADDED!
Okuma #Multus-B400W, Multi-Axis Cnc Turning Center, 28" swing, 26" diameter, 10000 RPM, 27 HP, 27" x9" x61 travel, 40 ATC, OSP-P200L Control, 8-Axis, 2007
Aucto | San Francisco, CA
Category: CNC Lathes and Turning Centers
Seller: Aucto
Location: Louisville, KY
Mfr: Okuma
Model: MULTUS-B400W
Year: 2007
THE OKUMA MULTUS B400W MULTI-AXIS CNC TURNING CENTER IS A HIGH-PERFORMANCE MULTI-TASKING MACHINE INTEGRATING TURNING, MILLING, DRILLING, AND TAPPING CAPABILITIES. IT IS CONTROLLED BY THE SOPHISTICATED OSP-P200L SYSTEM AND S 8 AXES, INCLUDING ADVANCED MULTI-AXIS FUNCTIONALITY AND A B-AXIS HEAD TILT RANGE OF -30° TO ...more
Okuma #LT-3000EX-2T2MY, CNC lathe, 21.6" swing, 47.2" centers, 3.15" bore, 13.78" turn diameter, 30/22 HP, 5000 RPM, 16 tool turret, 2013
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Okuma
Model: LT-3000EX 2T2MY
Year: 2013
Used 2013 Okuma LT-3000EX 2T2MY. Machine Tool Bids offers plenty of CNC Lathes and other fabrication and CNC machines for great prices. Contact us if you have any questions about this Okuma LT-3000EX 2T2MY or any of our machines., MACHINE, Max Swing Over Saddle: 21.66", Max Turn Diameter: 13.78", DISTANCE ...more
Okuma #LT-3000EX-2T2MY, CNC Lathe, 21.6" Swing, 47.2" Centers, 3.15" Bore, 13.78" Turn diameter, 30/22 HP, 5000 RPM, 16-Tools Turret, 2013
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Okuma
Model: LT-3000EX 2T2MY
Year: 2013
Used Okuma LT-3000EX 2T2MY. This pre-owned CNC Lathe is in great working condition and can be securely delivered to your facility floor. If you have any technical questions about this Okuma CNC Lathe we can review machine. To request a quote, inquire about rigging and trucking or to schedule an inspection, contact us ...more
JUST ADDED!
Nakamura Tome #AS-200LMYS, CNC lathe, 15.7" swing, 8" chuck, 1.6" bar, 16.7" centers, 24 turret, 2022
Machine Tool Bids | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machine Tool Bids
Location: Chicago, IL
Mfr: Nakamura
Model: AS-200LMYS
Year: 2022
The Nakamura Tome AS-200LMYS CNC Lathe (2022) with Fanuc Control delivers high-precision turning and milling for demanding production environments. Designed for rigid, heavy-duty cutting, it handles complex parts while reducing secondary operations. Ideal for automotive, aerospace, and medical manufacturing, this ...more
JUST ADDED!
Nakamura Tome #AS-200LMYS, CNC lathe, 15.7" swing, 8" chuck, 2.5" bar, 11" dia., 16.7" centers, tool presetter, 2022
Machinery Marketing International | Chicago, IL
Category: CNC Lathes and Turning Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Nakamura
Model: AS-200LMYS
Year: 2022
Live Tooling| Less than 400 Hours| Milling, The Nakamura Tome AS-200LMYS CNC Lathe (2022) with Fanuc Control delivers high-precision turning and milling for demanding production environments. Designed for rigid, heavy-duty cutting, it handles complex parts while reducing secondary operations. Ideal for automotive ...more
Mazak #FH-1080, horizontal machining center, 160 automatic tool changer, 64.6" X, 51" Y, 48" Z, 7000 RPM, #50, 50 HP, Fusion 640M, 2000
Machnet | Santa Monica, CA
Category: Horizontal CNC Machining Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Mazak
Model: FH-1080
Year: 2000
Mazak FH-1080 3-Machine Cell w/ 16 Pallets, Mazak FH-1080 Horizontal Machining Center - 3 Machine Cell, New: 2000, Travels:, X-Axis: 64.6", Y-Axis: 51", Z-Axis: 48", B-Axis: 0.001 N/C Contouring, Pallet Size: 39.3" x 39.3", Number of Pallets: 16, Pallet Weight Capacity: 6600 Lbs, Rapid Traverse Rates: 944/944/787 IPM ...more
WH Stationary Main Contact Assembly For Wli / Mvs, 5/15 KV 600 Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Westinghouse
Manufacturer Westinghouse / Cutler Hammer Product Family MVS Product Family WLI For Equipment Type SWITCH Unit Amperage 600A Type of Contact Assembly STATIONARY MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
Fuji Sangyo #FM-VG-10, High Shear Mixer, Stainless Steel, 10 liter, 2.2 kW main, 0.75 kW chopper, 1998
Federal Equipment Company | Cleveland, OH
Category: Granulators
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Fuji
Model: FM-VG-10
Year: 1998
Used 10 Liter Fuji Sangyo high shear mixer, model FM-VG-10, stainless steel construction, 2.2 kw main blade, 0.75 kw chopper motor, XP design, serial# 873146, built 1988.
Fp Moving Main Contact Assembly New For Li Switch, 600a, 5-15kv, 40k Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: Federal Pacific
Manufacturer Federal Pacific / Federal Pioneer Product Family LI For Equipment Type LI SWITCH Unit Amperage 600A Type of Contact Assembly MOVING MAIN Shipping Width 10 in Shipping Height 10 in Shipping Depth 10 in Shipping Weight 5 lb.
S&c 600 Amps Moving Contact Assembly
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Mfr: S&c Electric Co
Manufacturer S&C Product Family Type of Current Carrying Part MOVING MAIN Unit Amperage 600A For Equipment Type SWITCH Shipping Width 22 in Shipping Height 22 in Shipping Depth 12 in Shipping Weight 25 lb.
Rietz #RSP-16-K2, Continuous Screw Dewatering Press, 16" diameter Screw, 3 HP Cone Motor
Perry Videx LLC | Hainesport, NJ
Category: Dewatering Screw Presses
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Rietz
Model: RSP-16-K2
Used Rietz model RSP-16-K2 horizontal continuous screw dewatering press. 16" diameter screw. Stainless steel contact parts. 3 HP Cone motor., Requires main drive motor and gearbox. Mounted on I-beam steel base, 1972 RIETZ RSP-16-K2.
Sharples #P660, Stainless Steel decanter centrifuge
EcReCon Inc. | Pedericktown, NJ
Category: Decanter Centrifuges
Seller: EcReCon Inc.
Location: Pedericktown, NJ
Mfr: Sharples
Model: P660
, Sharples P660 Decanter Centrifuge. s a stainless steel bowl with a maximum speed of 6,000 RPM, generating up to 3,070 G's of force. The P660 uses an internal scroll conveyor to move dewatered solids to one end and discharge liquid from the other. Driven by a 5 HP main motor and a 1.5 HP back drive with a ...more
600 Amps Ite/gould Back Connected Stationary Main Contact/insulator Assembly For Hplc Interrupter Switch, 15kv, 600a, 61k Amps
National Switchgear - Parts | Lewisville, TX
Seller: National Switchgear - Parts
Location: Lewisville, TX
Manufacturer ABB / ITE / BBC Product Family HPLC For Equipment Type HPLC SWITCH Unit Amperage 600A Type of Contact Assembly STATIONARY MAIN Shipping Width 18 in Shipping Height 18 in Shipping Depth 18 in Shipping Weight 25 lb.
7.5 HP, Worthington #15T-2, air compressor, 30 cfm, 125 psi, 2 cylinder/2 stage, 7.5 HP, 1745 RPM
Yoder Machinery Sales | Holland, OH
Category: Tank Mounted Air Compressors
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Worthington
Model: 15T-2
SERIAL. AU732, MODEL. 15T-2, CFM. 30, MAXIMUM PRESSURE. 125 PSI, COMPRESSOR. 2-CYLINDER / 2-STAGE, RPM. 1745, MAIN AIR TANK CAPACITY. 80 GALLON, MOTOR. 7.5 HORSEPOWER.
